@@ -8251,6 +8251,45 @@ static void alc662_fixup_usi_headset_mic(struct hda_codec *codec,
}
}
+static void alc662_aspire_ethos_mute_speakers(struct hda_codec *codec,
+ struct hda_jack_callback *cb)
+{
+ /* surround speakers at 0x1b already get muted automatically when
+ * headphones are plugged in, but we have to mute/unmute the remaining
+ * channels manually:
+ * 0x15 - front left/front right
+ * 0x18 - front center/ LFE
+ */
+ if (snd_hda_jack_detect_state(codec, 0x1b) == HDA_JACK_PRESENT) {
+ snd_hda_set_pin_ctl_cache(codec, 0x15, 0);
+ snd_hda_set_pin_ctl_cache(codec, 0x18, 0);
+ } else {
+ snd_hda_set_pin_ctl_cache(codec, 0x15, PIN_OUT);
+ snd_hda_set_pin_ctl_cache(codec, 0x18, PIN_OUT);
+ }
+}
+
+static void alc662_fixup_aspire_ethos_hp(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ /* Pin 0x1b: shared headphones jack and surround speakers */
+ if (!is_jack_detectable(codec, 0x1b))
+ return;
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ snd_hda_jack_detect_enable_callback(codec, 0x1b,
+ alc662_aspire_ethos_mute_speakers);
+ break;
+ case HDA_FIXUP_ACT_INIT:
+ /* Make sure to start in a correct state, i.e. if
+ * headphones have been plugged in before powering up the system
+ */
+ alc662_aspire_ethos_mute_speakers(codec, NULL);
+ break;
+ }
+}
+
static struct coef_fw alc668_coefs[] = {
WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0),
WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80),
@@ -8322,6 +8361,9 @@ enum {
ALC662_FIXUP_USI_FUNC,
ALC662_FIXUP_USI_HEADSET_MODE,
ALC662_FIXUP_LENOVO_MULTI_CODECS,
+ ALC669_FIXUP_ACER_ASPIRE_ETHOS,
+ ALC669_FIXUP_ACER_ASPIRE_ETHOS_SUBWOOFER,
+ ALC669_FIXUP_ACER_ASPIRE_ETHOS_HEADSET,
};
static const struct hda_fixup alc662_fixups[] = {
@@ -8648,6 +8690,33 @@ static const struct hda_fixup alc662_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc233_alc662_fixup_lenovo_dual_codecs,
},
+ [ALC669_FIXUP_ACER_ASPIRE_ETHOS_HEADSET] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc662_fixup_aspire_ethos_hp,
+ },
+ [ALC669_FIXUP_ACER_ASPIRE_ETHOS_SUBWOOFER] = {
+ .type = HDA_FIXUP_VERBS,
+ /* subwoofer needs an extra GPIO setting to become audible */
+ .v.verbs = (const struct hda_verb[]) {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC669_FIXUP_ACER_ASPIRE_ETHOS_HEADSET
+ },
+ [ALC669_FIXUP_ACER_ASPIRE_ETHOS] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x15, 0x92130110 }, /* front speakers */
+ { 0x18, 0x99130111 }, /* center/subwoofer */
+ { 0x1b, 0x11130012 }, /* surround plus jack for HP */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC669_FIXUP_ACER_ASPIRE_ETHOS_SUBWOOFER
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -8693,6 +8762,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
SND_PCI_QUIRK(0x1b0a, 0x01b8, "ACER Veriton", ALC662_FIXUP_ACER_VERITON),
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
+ SND_PCI_QUIRK(0x1025, 0x0566, "Acer Aspire Ethos 8951G", ALC669_FIXUP_ACER_ASPIRE_ETHOS),
#if 0
/* Below is a quirk table taken from the old code.
@@ -8786,6 +8856,7 @@ static const struct hda_model_fixup alc662_fixup_models[] = {
{.id = ALC892_FIXUP_ASROCK_MOBO, .name = "asrock-mobo"},
{.id = ALC662_FIXUP_USI_HEADSET_MODE, .name = "usi-headset"},
{.id = ALC662_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"},
+ {.id = ALC669_FIXUP_ACER_ASPIRE_ETHOS, .name = "aspire-ethos"},
{}
};
This notebook has 6 built in speakers for 5.1 surround support, however only two got autodetected and have also not been assigned correctly. This patch enables all speakers and also fixes muting when headphones are plugged in. The speaker layout is as follows: pin 0x15 Front Left / Front Right pin 0x18 Front Center / Subwoofer pin 0x1b Rear Left / Rear Right (Surround) The quirk will be enabled automatically on this hardware, but can also be activated manually via the model=aspire-ethos module parameter. Caveat: pin 0x1b is shared between headphones jack and surround speakers. When headphones are plugged in, the surround speakers get muted automatically by the hardware, however all other speakers remain unmuted. Currently it's not possible to make use of the generic automute function in the driver, because such shared pins are not supported. If we would change the pin settings to identify the pin as headphones, the surround channel and thus the ability to select 5.1 profiles would get lost. This quirk solves the above problem by monitoring jack state of 0x1b and by connecting/disconnecting all remaining speaker pins when something gets plugged in or unplugged from the headphones jack port. Signed-off-by: Sergey Bostandzhyan <jin@mediatomb.cc> --- sound/pci/hda/patch_realtek.c | 71 +++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+)