| Message ID | 20190830205608.18192-3-mlevitsk@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | RFC crypto/luks: encryption key managment using amend interface | expand |
On Fri, Aug 30, 2019 at 11:56:00PM +0300, Maxim Levitsky wrote: > Now you can specify which slot to put the encryption key to > Plus add 'active' option which will let user erase the key secret > instead of adding it. > Check that it is true for creation > > Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> > --- > block/crypto.c | 2 ++ > block/crypto.h | 16 +++++++++++ > block/qcow2.c | 2 ++ > crypto/block-luks.c | 26 +++++++++++++++--- > qapi/crypto.json | 19 ++++++++++++++ > tests/qemu-iotests/082.out | 54 ++++++++++++++++++++++++++++++++++++++ > 6 files changed, 115 insertions(+), 4 deletions(-) > > diff --git a/block/crypto.c b/block/crypto.c > index 6e822c6e50..a6a3e1f1d8 100644 > --- a/block/crypto.c > +++ b/block/crypto.c > @@ -144,6 +144,8 @@ static QemuOptsList block_crypto_create_opts_luks = { > BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG(""), > BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG(""), > BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME(""), > + BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(""), > + BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(""), > { /* end of list */ } > }, > }; > diff --git a/block/crypto.h b/block/crypto.h > index b935695e79..05cc43d9bc 100644 > --- a/block/crypto.h > +++ b/block/crypto.h > @@ -35,12 +35,14 @@ > "ID of the secret that provides the AES encryption key") > > #define BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET "key-secret" > +#define BLOCK_CRYPTO_OPT_LUKS_SLOT "slot" > #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_ALG "cipher-alg" > #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_MODE "cipher-mode" > #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_ALG "ivgen-alg" > #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG "ivgen-hash-alg" > #define BLOCK_CRYPTO_OPT_LUKS_HASH_ALG "hash-alg" > #define BLOCK_CRYPTO_OPT_LUKS_ITER_TIME "iter-time" > +#define BLOCK_CRYPTO_OPT_LUKS_ACTIVE "active" > > #define BLOCK_CRYPTO_OPT_DEF_LUKS_KEY_SECRET(prefix) \ > BLOCK_CRYPTO_OPT_DEF_KEY_SECRET(prefix, \ > @@ -88,6 +90,20 @@ > .help = "Time to spend in PBKDF in milliseconds", \ > } > > +#define BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(prefix) \ > + { \ > + .name = prefix BLOCK_CRYPTO_OPT_LUKS_SLOT, \ > + .type = QEMU_OPT_NUMBER, \ > + .help = "Controls the slot where the secret is added/erased", \ > + } > + > +#define BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(prefix) \ > + { \ > + .name = prefix BLOCK_CRYPTO_OPT_LUKS_ACTIVE, \ > + .type = QEMU_OPT_BOOL, \ > + .help = "Controls if the added secret is added or erased", \ > + } Do we actually need the "active" property for initial creation. I think its only needed for amend, so perhaps we shuold not register this at all ? > + > QCryptoBlockCreateOptions * > block_crypto_create_opts_init(QDict *opts, Error **errp); > > diff --git a/block/qcow2.c b/block/qcow2.c > index 7c5a4859f7..be4a5063e5 100644 > --- a/block/qcow2.c > +++ b/block/qcow2.c > @@ -5167,6 +5167,8 @@ static QemuOptsList qcow2_create_opts = { > BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG("encrypt."), > BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG("encrypt."), > BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."), > + BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT("encrypt."), > + BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE("encrypt."), > { > .name = BLOCK_OPT_CLUSTER_SIZE, > .type = QEMU_OPT_SIZE, > diff --git a/crypto/block-luks.c b/crypto/block-luks.c > index 3af137e364..ba20d55246 100644 > --- a/crypto/block-luks.c > +++ b/crypto/block-luks.c > @@ -1230,6 +1230,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, > const char *hash_alg; > g_autofree char *cipher_mode_spec = NULL; > uint64_t iters; > + unsigned int slot_idx = 0; > > memcpy(&luks_opts, &options->u.luks, sizeof(luks_opts)); > if (!luks_opts.has_iter_time) { > @@ -1263,12 +1264,30 @@ qcrypto_block_luks_create(QCryptoBlock *block, > luks->ivgen_hash_alg = luks_opts.ivgen_hash_alg; > luks->hash_alg = luks_opts.hash_alg; > > + if (luks_opts.has_active && !luks_opts.active) { > + error_setg(errp, > + "For image creation, the added secret must be active!"); > + goto error; > + > + } > + > + if (luks_opts.has_slot) { > + if (luks_opts.slot >= QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS || > + luks_opts.slot < 0) { > + error_setg(errp, > + "Invalid slot %" PRId64 " is specified", > + luks_opts.slot); > + goto error; > + } > + slot_idx = (unsigned int)luks_opts.slot; > + } > + > > /* Note we're allowing ivgen_hash_alg to be set even for > * non-essiv iv generators that don't need a hash. It will > * be silently ignored, for compatibility with dm-crypt */ > > - if (!options->u.luks.key_secret) { > + if (!luks_opts.has_key_secret) { > error_setg(errp, "Parameter '%skey-secret' is required for cipher", > optprefix ? optprefix : ""); > goto error; > @@ -1473,11 +1492,10 @@ qcrypto_block_luks_create(QCryptoBlock *block, > goto error; > } > > - > - /* populate the slot 0 with the password encrypted master key*/ > + /* populate one of the slots with the password encrypted master key*/ > /* This will also store the header */ > if (qcrypto_block_luks_store_key(block, > - 0, > + slot_idx, > password, > masterkey, > luks_opts.iter_time, > diff --git a/qapi/crypto.json b/qapi/crypto.json > index b2a4cff683..9b83a70634 100644 > --- a/qapi/crypto.json > +++ b/qapi/crypto.json > @@ -190,6 +190,20 @@ > # Currently defaults to 'sha256' > # @hash-alg: the master key hash algorithm > # Currently defaults to 'sha256' > +# > +# @active: Should the new secret be added (true) or erased (false) > +# (amend only, since 4.2) > +# > +# @slot: The slot in which to put/erase the secret > +# if not given, will select first free slot for secret addtion > +# and erase all matching keyslots for erase. except last one > +# (optional, since 4.2) > +# > +# @unlock-secret: The secret to use to unlock the image > +# If not given, will use the secret that was used > +# when opening the image. > +# (optional, for amend only, since 4.2) > +# > # @iter-time: number of milliseconds to spend in > # PBKDF passphrase processing. Currently defaults > # to 2000. (since 2.8) > @@ -201,7 +215,12 @@ > '*cipher-mode': 'QCryptoCipherMode', > '*ivgen-alg': 'QCryptoIVGenAlgorithm', > '*ivgen-hash-alg': 'QCryptoHashAlgorithm', > + > '*hash-alg': 'QCryptoHashAlgorithm', > + '*active' : 'bool', > + '*slot': 'int', > + '*unlock-secret': 'str', > + > '*iter-time': 'int'}} > > > diff --git a/tests/qemu-iotests/082.out b/tests/qemu-iotests/082.out > index 9d4ed4dc9d..5651a0b953 100644 > --- a/tests/qemu-iotests/082.out > +++ b/tests/qemu-iotests/082.out > @@ -50,6 +50,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -58,6 +59,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -73,6 +75,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -81,6 +84,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -96,6 +100,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -104,6 +109,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -119,6 +125,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -127,6 +134,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -142,6 +150,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -150,6 +159,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -165,6 +175,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -173,6 +184,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -188,6 +200,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -196,6 +209,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -211,6 +225,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -219,6 +234,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -249,6 +265,7 @@ Supported qcow2 options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -257,6 +274,7 @@ Supported qcow2 options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -330,6 +348,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -338,6 +357,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -353,6 +373,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -361,6 +382,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -376,6 +398,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -384,6 +407,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -399,6 +423,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -407,6 +432,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -422,6 +448,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -430,6 +457,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -445,6 +473,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -453,6 +482,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -468,6 +498,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -476,6 +507,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -491,6 +523,7 @@ Supported options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -499,6 +532,7 @@ Supported options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) > @@ -529,6 +563,7 @@ Supported qcow2 options: > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -537,6 +572,7 @@ Supported qcow2 options: > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -621,6 +657,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -629,6 +666,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -645,6 +683,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -653,6 +692,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -669,6 +709,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -677,6 +718,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -693,6 +735,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -701,6 +744,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -717,6 +761,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -725,6 +770,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -741,6 +787,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -749,6 +796,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -765,6 +813,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -773,6 +822,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -789,6 +839,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -797,6 +848,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > @@ -830,6 +882,7 @@ Creation options for 'qcow2': > compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) > data_file=<str> - File name of an external data file > data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image > + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased > encrypt.cipher-alg=<str> - Name of encryption cipher algorithm > encrypt.cipher-mode=<str> - Name of encryption cipher mode > encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' > @@ -838,6 +891,7 @@ Creation options for 'qcow2': > encrypt.ivgen-alg=<str> - Name of IV generator algorithm > encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm > encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase > + encrypt.slot=<num> - Controls the slot where the secret is added/erased > encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) > lazy_refcounts=<bool (on/off)> - Postpone refcount updates > preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) > -- > 2.17.2 > Regards, Daniel
On Fri, 2019-09-06 at 14:49 +0100, Daniel P. Berrangé wrote: > On Fri, Aug 30, 2019 at 11:56:00PM +0300, Maxim Levitsky wrote: > > Now you can specify which slot to put the encryption key to > > Plus add 'active' option which will let user erase the key secret > > instead of adding it. > > Check that it is true for creation > > > > Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> > > --- > > block/crypto.c | 2 ++ > > block/crypto.h | 16 +++++++++++ > > block/qcow2.c | 2 ++ > > crypto/block-luks.c | 26 +++++++++++++++--- > > qapi/crypto.json | 19 ++++++++++++++ > > tests/qemu-iotests/082.out | 54 ++++++++++++++++++++++++++++++++++++++ > > 6 files changed, 115 insertions(+), 4 deletions(-) > > > > diff --git a/block/crypto.c b/block/crypto.c > > index 6e822c6e50..a6a3e1f1d8 100644 > > --- a/block/crypto.c > > +++ b/block/crypto.c > > @@ -144,6 +144,8 @@ static QemuOptsList block_crypto_create_opts_luks = { > > BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG(""), > > BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG(""), > > BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME(""), > > + BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(""), > > + BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(""), > > { /* end of list */ } > > }, > > }; > > diff --git a/block/crypto.h b/block/crypto.h > > index b935695e79..05cc43d9bc 100644 > > --- a/block/crypto.h > > +++ b/block/crypto.h > > @@ -35,12 +35,14 @@ > > "ID of the secret that provides the AES encryption key") > > > > #define BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET "key-secret" > > +#define BLOCK_CRYPTO_OPT_LUKS_SLOT "slot" > > #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_ALG "cipher-alg" > > #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_MODE "cipher-mode" > > #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_ALG "ivgen-alg" > > #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG "ivgen-hash-alg" > > #define BLOCK_CRYPTO_OPT_LUKS_HASH_ALG "hash-alg" > > #define BLOCK_CRYPTO_OPT_LUKS_ITER_TIME "iter-time" > > +#define BLOCK_CRYPTO_OPT_LUKS_ACTIVE "active" > > > > #define BLOCK_CRYPTO_OPT_DEF_LUKS_KEY_SECRET(prefix) \ > > BLOCK_CRYPTO_OPT_DEF_KEY_SECRET(prefix, \ > > @@ -88,6 +90,20 @@ > > .help = "Time to spend in PBKDF in milliseconds", \ > > } > > > > +#define BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(prefix) \ > > + { \ > > + .name = prefix BLOCK_CRYPTO_OPT_LUKS_SLOT, \ > > + .type = QEMU_OPT_NUMBER, \ > > + .help = "Controls the slot where the secret is added/erased", \ > > + } > > + > > +#define BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(prefix) \ > > + { \ > > + .name = prefix BLOCK_CRYPTO_OPT_LUKS_ACTIVE, \ > > + .type = QEMU_OPT_BOOL, \ > > + .help = "Controls if the added secret is added or erased", \ > > + } > > Do we actually need the "active" property for initial > creation. I think its only needed for amend, so perhaps > we shuold not register this at all ? Sadly we kind of do, since both amend and create use the same option list currently. I tried to duplicate it, and it is possible, but then you end up with significant code duplication in qcow2 with its huge create option list. I am now thinking that we could have had , 'create only' option list, 'amend only' option list, and 'common' option list. What do you think? [...] Best regards, Maxim Levitsky
On Fri, Sep 06, 2019 at 04:57:22PM +0300, Maxim Levitsky wrote: > On Fri, 2019-09-06 at 14:49 +0100, Daniel P. Berrangé wrote: > > On Fri, Aug 30, 2019 at 11:56:00PM +0300, Maxim Levitsky wrote: > > > Now you can specify which slot to put the encryption key to > > > Plus add 'active' option which will let user erase the key secret > > > instead of adding it. > > > Check that it is true for creation > > > > > > Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> > > > --- > > > block/crypto.c | 2 ++ > > > block/crypto.h | 16 +++++++++++ > > > block/qcow2.c | 2 ++ > > > crypto/block-luks.c | 26 +++++++++++++++--- > > > qapi/crypto.json | 19 ++++++++++++++ > > > tests/qemu-iotests/082.out | 54 ++++++++++++++++++++++++++++++++++++++ > > > 6 files changed, 115 insertions(+), 4 deletions(-) > > > > > > diff --git a/block/crypto.c b/block/crypto.c > > > index 6e822c6e50..a6a3e1f1d8 100644 > > > --- a/block/crypto.c > > > +++ b/block/crypto.c > > > @@ -144,6 +144,8 @@ static QemuOptsList block_crypto_create_opts_luks = { > > > BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG(""), > > > BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG(""), > > > BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME(""), > > > + BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(""), > > > + BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(""), > > > { /* end of list */ } > > > }, > > > }; > > > diff --git a/block/crypto.h b/block/crypto.h > > > index b935695e79..05cc43d9bc 100644 > > > --- a/block/crypto.h > > > +++ b/block/crypto.h > > > @@ -35,12 +35,14 @@ > > > "ID of the secret that provides the AES encryption key") > > > > > > #define BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET "key-secret" > > > +#define BLOCK_CRYPTO_OPT_LUKS_SLOT "slot" > > > #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_ALG "cipher-alg" > > > #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_MODE "cipher-mode" > > > #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_ALG "ivgen-alg" > > > #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG "ivgen-hash-alg" > > > #define BLOCK_CRYPTO_OPT_LUKS_HASH_ALG "hash-alg" > > > #define BLOCK_CRYPTO_OPT_LUKS_ITER_TIME "iter-time" > > > +#define BLOCK_CRYPTO_OPT_LUKS_ACTIVE "active" > > > > > > #define BLOCK_CRYPTO_OPT_DEF_LUKS_KEY_SECRET(prefix) \ > > > BLOCK_CRYPTO_OPT_DEF_KEY_SECRET(prefix, \ > > > @@ -88,6 +90,20 @@ > > > .help = "Time to spend in PBKDF in milliseconds", \ > > > } > > > > > > +#define BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(prefix) \ > > > + { \ > > > + .name = prefix BLOCK_CRYPTO_OPT_LUKS_SLOT, \ > > > + .type = QEMU_OPT_NUMBER, \ > > > + .help = "Controls the slot where the secret is added/erased", \ > > > + } > > > + > > > +#define BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(prefix) \ > > > + { \ > > > + .name = prefix BLOCK_CRYPTO_OPT_LUKS_ACTIVE, \ > > > + .type = QEMU_OPT_BOOL, \ > > > + .help = "Controls if the added secret is added or erased", \ > > > + } > > > > Do we actually need the "active" property for initial > > creation. I think its only needed for amend, so perhaps > > we shuold not register this at all ? > > Sadly we kind of do, since both amend and create use the same option list currently. > I tried to duplicate it, and it is possible, but then you end up > with significant code duplication in qcow2 with its huge create option list. Ah, I see now. > I am now thinking that we could have had , 'create only' option list, 'amend only' option list, > and 'common' option list. > What do you think? I'm not too fussed - either way is fine with me. Regards, Daniel
diff --git a/block/crypto.c b/block/crypto.c index 6e822c6e50..a6a3e1f1d8 100644 --- a/block/crypto.c +++ b/block/crypto.c @@ -144,6 +144,8 @@ static QemuOptsList block_crypto_create_opts_luks = { BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG(""), BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG(""), BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME(""), + BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(""), + BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(""), { /* end of list */ } }, }; diff --git a/block/crypto.h b/block/crypto.h index b935695e79..05cc43d9bc 100644 --- a/block/crypto.h +++ b/block/crypto.h @@ -35,12 +35,14 @@ "ID of the secret that provides the AES encryption key") #define BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET "key-secret" +#define BLOCK_CRYPTO_OPT_LUKS_SLOT "slot" #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_ALG "cipher-alg" #define BLOCK_CRYPTO_OPT_LUKS_CIPHER_MODE "cipher-mode" #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_ALG "ivgen-alg" #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG "ivgen-hash-alg" #define BLOCK_CRYPTO_OPT_LUKS_HASH_ALG "hash-alg" #define BLOCK_CRYPTO_OPT_LUKS_ITER_TIME "iter-time" +#define BLOCK_CRYPTO_OPT_LUKS_ACTIVE "active" #define BLOCK_CRYPTO_OPT_DEF_LUKS_KEY_SECRET(prefix) \ BLOCK_CRYPTO_OPT_DEF_KEY_SECRET(prefix, \ @@ -88,6 +90,20 @@ .help = "Time to spend in PBKDF in milliseconds", \ } +#define BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT(prefix) \ + { \ + .name = prefix BLOCK_CRYPTO_OPT_LUKS_SLOT, \ + .type = QEMU_OPT_NUMBER, \ + .help = "Controls the slot where the secret is added/erased", \ + } + +#define BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE(prefix) \ + { \ + .name = prefix BLOCK_CRYPTO_OPT_LUKS_ACTIVE, \ + .type = QEMU_OPT_BOOL, \ + .help = "Controls if the added secret is added or erased", \ + } + QCryptoBlockCreateOptions * block_crypto_create_opts_init(QDict *opts, Error **errp); diff --git a/block/qcow2.c b/block/qcow2.c index 7c5a4859f7..be4a5063e5 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -5167,6 +5167,8 @@ static QemuOptsList qcow2_create_opts = { BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG("encrypt."), BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG("encrypt."), BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."), + BLOCK_CRYPTO_OPT_DEF_LUKS_SLOT("encrypt."), + BLOCK_CRYPTO_OPT_DEF_LUKS_ACTIVE("encrypt."), { .name = BLOCK_OPT_CLUSTER_SIZE, .type = QEMU_OPT_SIZE, diff --git a/crypto/block-luks.c b/crypto/block-luks.c index 3af137e364..ba20d55246 100644 --- a/crypto/block-luks.c +++ b/crypto/block-luks.c @@ -1230,6 +1230,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, const char *hash_alg; g_autofree char *cipher_mode_spec = NULL; uint64_t iters; + unsigned int slot_idx = 0; memcpy(&luks_opts, &options->u.luks, sizeof(luks_opts)); if (!luks_opts.has_iter_time) { @@ -1263,12 +1264,30 @@ qcrypto_block_luks_create(QCryptoBlock *block, luks->ivgen_hash_alg = luks_opts.ivgen_hash_alg; luks->hash_alg = luks_opts.hash_alg; + if (luks_opts.has_active && !luks_opts.active) { + error_setg(errp, + "For image creation, the added secret must be active!"); + goto error; + + } + + if (luks_opts.has_slot) { + if (luks_opts.slot >= QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS || + luks_opts.slot < 0) { + error_setg(errp, + "Invalid slot %" PRId64 " is specified", + luks_opts.slot); + goto error; + } + slot_idx = (unsigned int)luks_opts.slot; + } + /* Note we're allowing ivgen_hash_alg to be set even for * non-essiv iv generators that don't need a hash. It will * be silently ignored, for compatibility with dm-crypt */ - if (!options->u.luks.key_secret) { + if (!luks_opts.has_key_secret) { error_setg(errp, "Parameter '%skey-secret' is required for cipher", optprefix ? optprefix : ""); goto error; @@ -1473,11 +1492,10 @@ qcrypto_block_luks_create(QCryptoBlock *block, goto error; } - - /* populate the slot 0 with the password encrypted master key*/ + /* populate one of the slots with the password encrypted master key*/ /* This will also store the header */ if (qcrypto_block_luks_store_key(block, - 0, + slot_idx, password, masterkey, luks_opts.iter_time, diff --git a/qapi/crypto.json b/qapi/crypto.json index b2a4cff683..9b83a70634 100644 --- a/qapi/crypto.json +++ b/qapi/crypto.json @@ -190,6 +190,20 @@ # Currently defaults to 'sha256' # @hash-alg: the master key hash algorithm # Currently defaults to 'sha256' +# +# @active: Should the new secret be added (true) or erased (false) +# (amend only, since 4.2) +# +# @slot: The slot in which to put/erase the secret +# if not given, will select first free slot for secret addtion +# and erase all matching keyslots for erase. except last one +# (optional, since 4.2) +# +# @unlock-secret: The secret to use to unlock the image +# If not given, will use the secret that was used +# when opening the image. +# (optional, for amend only, since 4.2) +# # @iter-time: number of milliseconds to spend in # PBKDF passphrase processing. Currently defaults # to 2000. (since 2.8) @@ -201,7 +215,12 @@ '*cipher-mode': 'QCryptoCipherMode', '*ivgen-alg': 'QCryptoIVGenAlgorithm', '*ivgen-hash-alg': 'QCryptoHashAlgorithm', + '*hash-alg': 'QCryptoHashAlgorithm', + '*active' : 'bool', + '*slot': 'int', + '*unlock-secret': 'str', + '*iter-time': 'int'}} diff --git a/tests/qemu-iotests/082.out b/tests/qemu-iotests/082.out index 9d4ed4dc9d..5651a0b953 100644 --- a/tests/qemu-iotests/082.out +++ b/tests/qemu-iotests/082.out @@ -50,6 +50,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -58,6 +59,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -73,6 +75,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -81,6 +84,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -96,6 +100,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -104,6 +109,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -119,6 +125,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -127,6 +134,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -142,6 +150,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -150,6 +159,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -165,6 +175,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -173,6 +184,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -188,6 +200,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -196,6 +209,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -211,6 +225,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -219,6 +234,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -249,6 +265,7 @@ Supported qcow2 options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -257,6 +274,7 @@ Supported qcow2 options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -330,6 +348,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -338,6 +357,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -353,6 +373,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -361,6 +382,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -376,6 +398,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -384,6 +407,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -399,6 +423,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -407,6 +432,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -422,6 +448,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -430,6 +457,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -445,6 +473,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -453,6 +482,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -468,6 +498,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -476,6 +507,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -491,6 +523,7 @@ Supported options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -499,6 +532,7 @@ Supported options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs) @@ -529,6 +563,7 @@ Supported qcow2 options: compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -537,6 +572,7 @@ Supported qcow2 options: encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -621,6 +657,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -629,6 +666,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -645,6 +683,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -653,6 +692,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -669,6 +709,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -677,6 +718,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -693,6 +735,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -701,6 +744,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -717,6 +761,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -725,6 +770,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -741,6 +787,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -749,6 +796,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -765,6 +813,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -773,6 +822,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -789,6 +839,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -797,6 +848,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full) @@ -830,6 +882,7 @@ Creation options for 'qcow2': compat=<str> - Compatibility level (v2 [0.10] or v3 [1.1]) data_file=<str> - File name of an external data file data_file_raw=<bool (on/off)> - The external data file must stay valid as a raw image + encrypt.active=<bool (on/off)> - Controls if the added secret is added or erased encrypt.cipher-alg=<str> - Name of encryption cipher algorithm encrypt.cipher-mode=<str> - Name of encryption cipher mode encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks' @@ -838,6 +891,7 @@ Creation options for 'qcow2': encrypt.ivgen-alg=<str> - Name of IV generator algorithm encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase + encrypt.slot=<num> - Controls the slot where the secret is added/erased encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes) lazy_refcounts=<bool (on/off)> - Postpone refcount updates preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
Now you can specify which slot to put the encryption key to Plus add 'active' option which will let user erase the key secret instead of adding it. Check that it is true for creation Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> --- block/crypto.c | 2 ++ block/crypto.h | 16 +++++++++++ block/qcow2.c | 2 ++ crypto/block-luks.c | 26 +++++++++++++++--- qapi/crypto.json | 19 ++++++++++++++ tests/qemu-iotests/082.out | 54 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 115 insertions(+), 4 deletions(-)