| Message ID | 20190906135436.10622-10-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | [v4,1/9] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation | expand |
Hi Jacopo, On 06/09/2019 14:54, Jacopo Mondi wrote: > Add CMM units to Renesas R-Car Gen3 SoC that support it, and reference them > from the Display Unit they are connected to. > > Sort the 'vsps' and 'renesas,cmm' entries in the DU unit consistently > in all the involved DTS. I think if you chose the ordering in the r8a7795, then you only have to adjust/correct the ordering in the r8a7796 and r8a77965 ... Especially as you haven't changed the ordering of r8a77970, and r8a77980 which have the status after the vsps entry. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++++++++- > arch/arm64/boot/dts/renesas/r8a7796.dtsi | 28 ++++++++++++++++ > arch/arm64/boot/dts/renesas/r8a77965.dtsi | 28 ++++++++++++++++ > arch/arm64/boot/dts/renesas/r8a77990.dtsi | 22 ++++++++++++- > arch/arm64/boot/dts/renesas/r8a77995.dtsi | 22 ++++++++++++- > 5 files changed, 137 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi > index 6675462f7585..67c242a447bc 100644 > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi > @@ -2939,6 +2939,42 @@ > iommus = <&ipmmu_vi1 10>; > }; > > + cmm0: cmm@fea40000 { > + compatible = "renesas,r8a7795-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea40000 0 0x1000>; > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 711>; > + resets = <&cpg 711>; > + }; > + > + cmm1: cmm@fea50000 { > + compatible = "renesas,r8a7795-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea50000 0 0x1000>; > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 710>; > + resets = <&cpg 710>; > + }; > + > + cmm2: cmm@fea60000 { > + compatible = "renesas,r8a7795-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea60000 0 0x1000>; > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 709>; > + resets = <&cpg 709>; > + }; > + > + cmm3: cmm@fea70000 { > + compatible = "renesas,r8a7795-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea70000 0 0x1000>; > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 708>; > + resets = <&cpg 708>; > + }; > + > csi20: csi2@fea80000 { > compatible = "renesas,r8a7795-csi2"; > reg = <0 0xfea80000 0 0x10000>; > @@ -3142,9 +3178,11 @@ > <&cpg CPG_MOD 722>, > <&cpg CPG_MOD 721>; > clock-names = "du.0", "du.1", "du.2", "du.3"; > - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; > status = "disabled"; I'm not sure the vsps should be below the status = disabled line. I'd have this as: clock-names... vsps... renesas,cmms... <blank line> status... <blank line> ports... > > + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; > + renesas,cmms = <&cmm0 &cmm1 &cmm2 &cmm3>; I think these should be separated by comma's to show they are separate references, or references to separate phandles or such. The only precedence I could find was in pmu_a53: interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; > + > ports { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi > index 822c96601d3c..837c3b2da773 100644 > --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi > +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi > @@ -2641,6 +2641,33 @@ > renesas,fcp = <&fcpvi0>; > }; > > + cmm0: cmm@fea40000 { > + compatible = "renesas,r8a7796-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea40000 0 0x1000>; > + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 711>; > + resets = <&cpg 711>; > + }; > + > + cmm1: cmm@fea50000 { > + compatible = "renesas,r8a7796-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea50000 0 0x1000>; > + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 710>; > + resets = <&cpg 710>; > + }; > + > + cmm2: cmm@fea60000 { > + compatible = "renesas,r8a7796-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea60000 0 0x1000>; > + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 709>; > + resets = <&cpg 709>; > + }; > + > csi20: csi2@fea80000 { > compatible = "renesas,r8a7796-csi2"; > reg = <0 0xfea80000 0 0x10000>; > @@ -2794,6 +2821,7 @@ > status = "disabled"; > > vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; > + renesas,cmms = <&cmm0 &cmm1 &cmm2>; Aha, yes, I'd move this vsps rather than the one at r8a7795, which I'd consider to be more 'correct'. > > ports { > #address-cells = <1>; > diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi > index 4ae163220f60..c7635e8b261c 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi > +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi > @@ -2320,6 +2320,33 @@ > resets = <&cpg 611>; > }; > > + cmm0: cmm@fea40000 { > + compatible = "renesas,r8a77965-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea40000 0 0x1000>; > + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 711>; > + resets = <&cpg 711>; > + }; > + > + cmm1: cmm@fea50000 { > + compatible = "renesas,r8a77965-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea50000 0 0x1000>; > + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 710>; > + resets = <&cpg 710>; > + }; > + > + cmm3: cmm@fea70000 { > + compatible = "renesas,r8a77965-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea70000 0 0x1000>; > + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 708>; > + resets = <&cpg 708>; > + }; > + > csi20: csi2@fea80000 { > compatible = "renesas,r8a77965-csi2"; > reg = <0 0xfea80000 0 0x10000>; > @@ -2470,6 +2497,7 @@ > status = "disabled"; > > vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; > + renesas,cmms = <&cmm0 &cmm1 &cmm3>; Again, I'd consider this the wrong sort order, due to the status' importance. I wouldn't hide it in the middle. > > ports { > #address-cells = <1>; > diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi > index 455954c3d98e..5e3d758a033f 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi > +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi > @@ -1727,6 +1727,24 @@ > iommus = <&ipmmu_vi0 9>; > }; > > + cmm0: cmm@fea40000 { > + compatible = "renesas,r8a77990-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea40000 0 0x1000>; > + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 711>; > + resets = <&cpg 711>; > + }; > + > + cmm1: cmm@fea50000 { > + compatible = "renesas,r8a77990-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea50000 0 0x1000>; > + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 710>; > + resets = <&cpg 710>; > + }; > + > csi40: csi2@feaa0000 { > compatible = "renesas,r8a77990-csi2"; > reg = <0 0xfeaa0000 0 0x10000>; > @@ -1768,9 +1786,11 @@ > clock-names = "du.0", "du.1"; > resets = <&cpg 724>; > reset-names = "du.0"; > - vsps = <&vspd0 0>, <&vspd1 0>; > status = "disabled"; > > + vsps = <&vspd0 0>, <&vspd1 0>; > + renesas,cmms = <&cmm0 &cmm1>; Same ... :D > + > ports { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi > index 183fef86cf7c..6838a81f5caa 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi > +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi > @@ -993,6 +993,24 @@ > iommus = <&ipmmu_vi0 9>; > }; > > + cmm0: cmm@fea40000 { > + compatible = "renesas,r8a77995-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea40000 0 0x1000>; > + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 711>; > + resets = <&cpg 711>; > + }; > + > + cmm1: cmm@fea50000 { > + compatible = "renesas,r8a77995-cmm", > + "renesas,rcar-gen3-cmm"; > + reg = <0 0xfea50000 0 0x1000>; > + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; > + clocks = <&cpg CPG_MOD 710>; > + resets = <&cpg 710>; > + }; > + > du: display@feb00000 { > compatible = "renesas,du-r8a77995"; > reg = <0 0xfeb00000 0 0x40000>; > @@ -1003,9 +1021,11 @@ > clock-names = "du.0", "du.1"; > resets = <&cpg 724>; > reset-names = "du.0"; > - vsps = <&vspd0 0>, <&vspd1 0>; > status = "disabled"; > > + vsps = <&vspd0 0>, <&vspd1 0>; > + renesas,cmms = <&cmm0 &cmm1>; > + Same. > ports { > #address-cells = <1>; > #size-cells = <0>; >
Hi Kieran, Jacopo, On Wed, Sep 11, 2019 at 8:16 PM Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> wrote: > On 06/09/2019 14:54, Jacopo Mondi wrote: > > Add CMM units to Renesas R-Car Gen3 SoC that support it, and reference them > > from the Display Unit they are connected to. > > > > Sort the 'vsps' and 'renesas,cmm' entries in the DU unit consistently > > in all the involved DTS. > > I think if you chose the ordering in the r8a7795, then you only have to > adjust/correct the ordering in the r8a7796 and r8a77965 ... > > Especially as you haven't changed the ordering of r8a77970, and r8a77980 > which have the status after the vsps entry. > > > > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi > > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi > > @@ -3142,9 +3178,11 @@ > > <&cpg CPG_MOD 722>, > > <&cpg CPG_MOD 721>; > > clock-names = "du.0", "du.1", "du.2", "du.3"; > > - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; > > status = "disabled"; > > I'm not sure the vsps should be below the status = disabled line. > > I'd have this as: > > clock-names... > vsps... > renesas,cmms... > <blank line> > status... > <blank line> > ports... Indeed. And better write "ports { ... }", so it's clear this is a subnode. > > > > > + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; And the above will become "renesas,vsps", needing another reordering? > > + renesas,cmms = <&cmm0 &cmm1 &cmm2 &cmm3>; > > I think these should be separated by comma's to show they are separate > references, or references to separate phandles or such. Yep, looks better, and makes the grouping clear. > The only precedence I could find was in pmu_a53: > > interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; That's because most other phandle stuff has #<foo>-cells as non-zero. We do have clocks = ... <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>; Gr{oetje,eeting}s, Geert
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 6675462f7585..67c242a447bc 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -2939,6 +2939,42 @@ iommus = <&ipmmu_vi1 10>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7795-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -3142,9 +3178,11 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; status = "disabled"; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + renesas,cmms = <&cmm0 &cmm1 &cmm2 &cmm3>; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 822c96601d3c..837c3b2da773 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -2641,6 +2641,33 @@ renesas,fcp = <&fcpvi0>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7796-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2794,6 +2821,7 @@ status = "disabled"; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + renesas,cmms = <&cmm0 &cmm1 &cmm2>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 4ae163220f60..c7635e8b261c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2320,6 +2320,33 @@ resets = <&cpg 611>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a77965-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2470,6 +2497,7 @@ status = "disabled"; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + renesas,cmms = <&cmm0 &cmm1 &cmm3>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 455954c3d98e..5e3d758a033f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1727,6 +1727,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1768,9 +1786,11 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; - vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; + vsps = <&vspd0 0>, <&vspd1 0>; + renesas,cmms = <&cmm0 &cmm1>; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 183fef86cf7c..6838a81f5caa 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -993,6 +993,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77995"; reg = <0 0xfeb00000 0 0x40000>; @@ -1003,9 +1021,11 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; - vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; + vsps = <&vspd0 0>, <&vspd1 0>; + renesas,cmms = <&cmm0 &cmm1>; + ports { #address-cells = <1>; #size-cells = <0>;
Add CMM units to Renesas R-Car Gen3 SoC that support it, and reference them from the Display Unit they are connected to. Sort the 'vsps' and 'renesas,cmm' entries in the DU unit consistently in all the involved DTS. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++++++++- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 28 ++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77965.dtsi | 28 ++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77990.dtsi | 22 ++++++++++++- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 22 ++++++++++++- 5 files changed, 137 insertions(+), 3 deletions(-)