@@ -18,57 +18,14 @@ static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev, i
static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
u32 flags)
{
- struct panfrost_device *pfdev = platform_get_drvdata(to_platform_device(dev));
- struct dev_pm_opp *opp;
- unsigned long old_clk_rate = pfdev->devfreq.cur_freq;
- unsigned long target_volt, target_rate;
+ struct panfrost_device *pfdev = dev_get_drvdata(dev);
int err;
- opp = devfreq_recommended_opp(dev, freq, flags);
- if (IS_ERR(opp))
- return PTR_ERR(opp);
-
- target_rate = dev_pm_opp_get_freq(opp);
- target_volt = dev_pm_opp_get_voltage(opp);
- dev_pm_opp_put(opp);
-
- if (old_clk_rate == target_rate)
- return 0;
-
- /*
- * If frequency scaling from low to high, adjust voltage first.
- * If frequency scaling from high to low, adjust frequency first.
- */
- if (old_clk_rate < target_rate && pfdev->regulator) {
- err = regulator_set_voltage(pfdev->regulator, target_volt,
- target_volt);
- if (err) {
- dev_err(dev, "Cannot set voltage %lu uV\n",
- target_volt);
- return err;
- }
- }
-
- err = clk_set_rate(pfdev->clock, target_rate);
- if (err) {
- dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
- err);
- if (pfdev->regulator)
- regulator_set_voltage(pfdev->regulator,
- pfdev->devfreq.cur_volt,
- pfdev->devfreq.cur_volt);
+ err = dev_pm_opp_set_rate(dev, *freq);
+ if (err)
return err;
- }
- if (old_clk_rate > target_rate && pfdev->regulator) {
- err = regulator_set_voltage(pfdev->regulator, target_volt,
- target_volt);
- if (err)
- dev_err(dev, "Cannot set voltage %lu uV\n", target_volt);
- }
-
- pfdev->devfreq.cur_freq = target_rate;
- pfdev->devfreq.cur_volt = target_volt;
+ *freq = clk_get_rate(pfdev->clock);
return 0;
}
@@ -88,7 +45,7 @@ static void panfrost_devfreq_reset(struct panfrost_device *pfdev)
static int panfrost_devfreq_get_dev_status(struct device *dev,
struct devfreq_dev_status *status)
{
- struct panfrost_device *pfdev = platform_get_drvdata(to_platform_device(dev));
+ struct panfrost_device *pfdev = dev_get_drvdata(dev);
int i;
for (i = 0; i < NUM_JOB_SLOTS; i++) {
@@ -121,7 +78,7 @@ static int panfrost_devfreq_get_cur_freq(struct device *dev, unsigned long *freq
{
struct panfrost_device *pfdev = platform_get_drvdata(to_platform_device(dev));
- *freq = pfdev->devfreq.cur_freq;
+ *freq = clk_get_rate(pfdev->clock);
return 0;
}
@@ -137,6 +94,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
{
int ret;
struct dev_pm_opp *opp;
+ unsigned long cur_freq;
ret = dev_pm_opp_of_add_table(&pfdev->pdev->dev);
if (ret == -ENODEV) /* Optional, continue without devfreq */
@@ -146,13 +104,13 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
panfrost_devfreq_reset(pfdev);
- pfdev->devfreq.cur_freq = clk_get_rate(pfdev->clock);
+ cur_freq = clk_get_rate(pfdev->clock);
- opp = devfreq_recommended_opp(&pfdev->pdev->dev, &pfdev->devfreq.cur_freq, 0);
+ opp = devfreq_recommended_opp(&pfdev->pdev->dev, &cur_freq, 0);
if (IS_ERR(opp))
return PTR_ERR(opp);
- panfrost_devfreq_profile.initial_freq = pfdev->devfreq.cur_freq;
+ panfrost_devfreq_profile.initial_freq = cur_freq;
dev_pm_opp_put(opp);
pfdev->devfreq.devfreq = devm_devfreq_add_device(&pfdev->pdev->dev,
@@ -95,8 +95,6 @@ struct panfrost_device {
struct {
struct devfreq *devfreq;
struct thermal_cooling_device *cooling;
- unsigned long cur_freq;
- unsigned long cur_volt;
struct panfrost_devfreq_slot slot[NUM_JOB_SLOTS];
} devfreq;
};
Use dev_pm_opp_set_rate() instead of open coding the devfreq integration, simplifying the code. Signed-off-by: Steven Price <steven.price@arm.com> --- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 62 ++++----------------- drivers/gpu/drm/panfrost/panfrost_device.h | 2 - 2 files changed, 10 insertions(+), 54 deletions(-)