| Message ID | 1568776157-5373-3-git-send-email-gupt21@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] iio: light: add driver for veml6030 ambient light sensor | expand |
On Wed, 18 Sep 2019, Rishi Gupta wrote: > This commit adds device tree bindings for veml6030 ambient > light sensor. comment below > Signed-off-by: Rishi Gupta <gupt21@gmail.com> > --- > .../devicetree/bindings/iio/light/veml6030.yaml | 62 ++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/veml6030.yaml > > diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml > new file mode 100644 > index 0000000..d92684a > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/light/veml6030.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: VEML6030 Ambient Light Sensor (ALS) > + > +maintainers: > + - Rishi Gupta <gupt21@gmail.com> > + > +description: | > + Bindings for the ambient light sensor veml6030 from Vishay > + Semiconductors over an i2c interface. > + > + Irrespective of whether interrupt is used or not, application > + can get the ALS and White channel reading from IIO raw interface. > + > + If the interrupts is used, application will receive an IIO event interrupts are used > + whenever configured threshold is crossed. > + > + Specifications about the sensor can be found at: > + https://www.vishay.com/docs/84366/veml6030.pdf > + > +properties: > + compatible: > + enum: > + - vishay,veml6030 > + > + reg: > + description: > + I2C address of the device. If the ADDR pin on veml6030 > + is pulled up, this address is 0x48. If the ADDR pin is > + pulled down, this address is 0x10. > + maxItems: 1 > + > + interrupts: > + description: > + interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW. > + Refer to interrupt-controller/interrupts.txt for generic > + interrupt client node bindings. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + light-sensor@10 { > + compatible = "vishay,veml6030"; > + reg = <0x10>; > + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; > + }; > + }; > +... >
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml new file mode 100644 index 0000000..d92684a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/veml6030.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VEML6030 Ambient Light Sensor (ALS) + +maintainers: + - Rishi Gupta <gupt21@gmail.com> + +description: | + Bindings for the ambient light sensor veml6030 from Vishay + Semiconductors over an i2c interface. + + Irrespective of whether interrupt is used or not, application + can get the ALS and White channel reading from IIO raw interface. + + If the interrupts is used, application will receive an IIO event + whenever configured threshold is crossed. + + Specifications about the sensor can be found at: + https://www.vishay.com/docs/84366/veml6030.pdf + +properties: + compatible: + enum: + - vishay,veml6030 + + reg: + description: + I2C address of the device. If the ADDR pin on veml6030 + is pulled up, this address is 0x48. If the ADDR pin is + pulled down, this address is 0x10. + maxItems: 1 + + interrupts: + description: + interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW. + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@10 { + compatible = "vishay,veml6030"; + reg = <0x10>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; + }; +...
This commit adds device tree bindings for veml6030 ambient light sensor. Signed-off-by: Rishi Gupta <gupt21@gmail.com> --- .../devicetree/bindings/iio/light/veml6030.yaml | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/veml6030.yaml