| Message ID | 20190907092007.9946-7-krzk@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,01/11] dt-bindings: power: syscon-reboot: Convert bindings to json-schema | expand |
On Sat, Sep 07, 2019 at 11:20:03AM +0200, Krzysztof Kozlowski wrote: > Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema > format using json-schema. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > > --- > > Changes since v1: > 1. Fix clock-names to match all elements against schema (any number of > any clkoutN values). > This currently fails: > properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2', > 'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8', > 'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14', > 'clkout15', 'clkout16']} is not of type 'array > > 2. Add syscon reboot and poweroff nodes. > --- > .../devicetree/bindings/arm/samsung/pmu.txt | 72 ----------- > .../devicetree/bindings/arm/samsung/pmu.yaml | 117 ++++++++++++++++++ > 2 files changed, 117 insertions(+), 72 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt > create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > deleted file mode 100644 > index 433bfd7593ac..000000000000 > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt > +++ /dev/null > @@ -1,72 +0,0 @@ > -SAMSUNG Exynos SoC series PMU Registers > - > -Properties: > - - compatible : should contain two values. First value must be one from following list: > - - "samsung,exynos3250-pmu" - for Exynos3250 SoC, > - - "samsung,exynos4210-pmu" - for Exynos4210 SoC, > - - "samsung,exynos4412-pmu" - for Exynos4412 SoC, > - - "samsung,exynos5250-pmu" - for Exynos5250 SoC, > - - "samsung,exynos5260-pmu" - for Exynos5260 SoC. > - - "samsung,exynos5410-pmu" - for Exynos5410 SoC, > - - "samsung,exynos5420-pmu" - for Exynos5420 SoC. > - - "samsung,exynos5433-pmu" - for Exynos5433 SoC. > - - "samsung,exynos7-pmu" - for Exynos7 SoC. > - second value must be always "syscon". > - > - - reg : offset and length of the register set. > - > - - #clock-cells : must be <1>, since PMU requires once cell as clock specifier. > - The single specifier cell is used as index to list of clocks > - provided by PMU, which is currently: > - 0 : SoC clock output (CLKOUT pin) > - > - - clock-names : list of clock names for particular CLKOUT mux inputs in > - following format: > - "clkoutN", where N is a decimal number corresponding to > - CLKOUT mux control bits value for given input, e.g. > - "clkout0", "clkout7", "clkout15". > - > - - clocks : list of phandles and specifiers to all input clocks listed in > - clock-names property. > - > -Optional properties: > - > -Some PMUs are capable of behaving as an interrupt controller (mostly > -to wake up a suspended PMU). In which case, they can have the > -following properties: > - > -- interrupt-controller: indicate that said PMU is an interrupt controller > - > -- #interrupt-cells: must be identical to the that of the parent interrupt > - controller. > - > - > -Optional nodes: > - > -- nodes defining the restart and poweroff syscon children > - > - > -Example : > -pmu_system_controller: system-controller@10040000 { > - compatible = "samsung,exynos5250-pmu", "syscon"; > - reg = <0x10040000 0x5000>; > - interrupt-controller; > - #interrupt-cells = <3>; > - interrupt-parent = <&gic>; > - #clock-cells = <1>; > - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", > - "clkout4", "clkout8", "clkout9"; > - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, > - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, > - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, > - <&clock CLK_XUSBXTI>; > -}; > - > -Example of clock consumer : > - > -usb3503: usb3503@8 { > - /* ... */ > - clock-names = "refclk"; > - clocks = <&pmu_system_controller 0>; > - /* ... */ > -}; > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml > new file mode 100644 > index 000000000000..a5a02f8237fb > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml > @@ -0,0 +1,117 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung Exynos SoC series Power Management Unit (PMU) > + > +maintainers: > + - Krzysztof Kozlowski <krzk@kernel.org> > + > +properties: > + compatible: > + items: > + - enum: > + - samsung,exynos3250-pmu > + - samsung,exynos4210-pmu > + - samsung,exynos4412-pmu > + - samsung,exynos5250-pmu > + - samsung,exynos5260-pmu > + - samsung,exynos5410-pmu > + - samsung,exynos5420-pmu > + - samsung,exynos5433-pmu > + - samsung,exynos7-pmu > + - const: syscon > + > + reg: > + maxItems: 1 > + > + '#clock-cells': > + const: 1 > + > + clock-names: > + description: > + List of clock names for particular CLKOUT mux inputs > + minItems: 1 > + maxItems: 32 > + items: > + enum: > + - clkout0 > + - clkout1 Looking at this again, instead of enum, we can just do: pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$' > + - clkout2 > + - clkout3 > + - clkout4 > + - clkout5 > + - clkout6 > + - clkout7 > + - clkout8 > + - clkout9 > + - clkout10 > + - clkout11 > + - clkout12 > + - clkout13 > + - clkout14 > + - clkout15 > + - clkout16 > + - clkout17 > + - clkout18 > + - clkout19 > + - clkout20 > + - clkout21 > + - clkout22 > + - clkout23 > + - clkout24 > + - clkout25 > + - clkout26 > + - clkout27 > + - clkout28 > + - clkout29 > + - clkout30 > + - clkout31
On Wed, Sep 18, 2019 at 07:43:06AM -0500, Rob Herring wrote: > On Sat, Sep 07, 2019 at 11:20:03AM +0200, Krzysztof Kozlowski wrote: > > Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema > > format using json-schema. > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > > > > --- > > > > Changes since v1: > > 1. Fix clock-names to match all elements against schema (any number of > > any clkoutN values). > > This currently fails: > > properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2', > > 'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8', > > 'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14', > > 'clkout15', 'clkout16']} is not of type 'array > > > > 2. Add syscon reboot and poweroff nodes. > > --- > > .../devicetree/bindings/arm/samsung/pmu.txt | 72 ----------- > > .../devicetree/bindings/arm/samsung/pmu.yaml | 117 ++++++++++++++++++ > > 2 files changed, 117 insertions(+), 72 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt > > create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > > deleted file mode 100644 > > index 433bfd7593ac..000000000000 > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt > > +++ /dev/null > > @@ -1,72 +0,0 @@ > > -SAMSUNG Exynos SoC series PMU Registers > > - > > -Properties: > > - - compatible : should contain two values. First value must be one from following list: > > - - "samsung,exynos3250-pmu" - for Exynos3250 SoC, > > - - "samsung,exynos4210-pmu" - for Exynos4210 SoC, > > - - "samsung,exynos4412-pmu" - for Exynos4412 SoC, > > - - "samsung,exynos5250-pmu" - for Exynos5250 SoC, > > - - "samsung,exynos5260-pmu" - for Exynos5260 SoC. > > - - "samsung,exynos5410-pmu" - for Exynos5410 SoC, > > - - "samsung,exynos5420-pmu" - for Exynos5420 SoC. > > - - "samsung,exynos5433-pmu" - for Exynos5433 SoC. > > - - "samsung,exynos7-pmu" - for Exynos7 SoC. > > - second value must be always "syscon". > > - > > - - reg : offset and length of the register set. > > - > > - - #clock-cells : must be <1>, since PMU requires once cell as clock specifier. > > - The single specifier cell is used as index to list of clocks > > - provided by PMU, which is currently: > > - 0 : SoC clock output (CLKOUT pin) > > - > > - - clock-names : list of clock names for particular CLKOUT mux inputs in > > - following format: > > - "clkoutN", where N is a decimal number corresponding to > > - CLKOUT mux control bits value for given input, e.g. > > - "clkout0", "clkout7", "clkout15". > > - > > - - clocks : list of phandles and specifiers to all input clocks listed in > > - clock-names property. > > - > > -Optional properties: > > - > > -Some PMUs are capable of behaving as an interrupt controller (mostly > > -to wake up a suspended PMU). In which case, they can have the > > -following properties: > > - > > -- interrupt-controller: indicate that said PMU is an interrupt controller > > - > > -- #interrupt-cells: must be identical to the that of the parent interrupt > > - controller. > > - > > - > > -Optional nodes: > > - > > -- nodes defining the restart and poweroff syscon children > > - > > - > > -Example : > > -pmu_system_controller: system-controller@10040000 { > > - compatible = "samsung,exynos5250-pmu", "syscon"; > > - reg = <0x10040000 0x5000>; > > - interrupt-controller; > > - #interrupt-cells = <3>; > > - interrupt-parent = <&gic>; > > - #clock-cells = <1>; > > - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", > > - "clkout4", "clkout8", "clkout9"; > > - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, > > - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, > > - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, > > - <&clock CLK_XUSBXTI>; > > -}; > > - > > -Example of clock consumer : > > - > > -usb3503: usb3503@8 { > > - /* ... */ > > - clock-names = "refclk"; > > - clocks = <&pmu_system_controller 0>; > > - /* ... */ > > -}; > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml > > new file mode 100644 > > index 000000000000..a5a02f8237fb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml > > @@ -0,0 +1,117 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Samsung Exynos SoC series Power Management Unit (PMU) > > + > > +maintainers: > > + - Krzysztof Kozlowski <krzk@kernel.org> > > + > > +properties: > > + compatible: > > + items: > > + - enum: > > + - samsung,exynos3250-pmu > > + - samsung,exynos4210-pmu > > + - samsung,exynos4412-pmu > > + - samsung,exynos5250-pmu > > + - samsung,exynos5260-pmu > > + - samsung,exynos5410-pmu > > + - samsung,exynos5420-pmu > > + - samsung,exynos5433-pmu > > + - samsung,exynos7-pmu > > + - const: syscon > > + > > + reg: > > + maxItems: 1 > > + > > + '#clock-cells': > > + const: 1 > > + > > + clock-names: > > + description: > > + List of clock names for particular CLKOUT mux inputs > > + minItems: 1 > > + maxItems: 32 > > + items: > > + enum: > > + - clkout0 > > + - clkout1 > > Looking at this again, instead of enum, we can just do: > > pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$' Indeed looks better. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt deleted file mode 100644 index 433bfd7593ac..000000000000 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ /dev/null @@ -1,72 +0,0 @@ -SAMSUNG Exynos SoC series PMU Registers - -Properties: - - compatible : should contain two values. First value must be one from following list: - - "samsung,exynos3250-pmu" - for Exynos3250 SoC, - - "samsung,exynos4210-pmu" - for Exynos4210 SoC, - - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - - "samsung,exynos5260-pmu" - for Exynos5260 SoC. - - "samsung,exynos5410-pmu" - for Exynos5410 SoC, - - "samsung,exynos5420-pmu" - for Exynos5420 SoC. - - "samsung,exynos5433-pmu" - for Exynos5433 SoC. - - "samsung,exynos7-pmu" - for Exynos7 SoC. - second value must be always "syscon". - - - reg : offset and length of the register set. - - - #clock-cells : must be <1>, since PMU requires once cell as clock specifier. - The single specifier cell is used as index to list of clocks - provided by PMU, which is currently: - 0 : SoC clock output (CLKOUT pin) - - - clock-names : list of clock names for particular CLKOUT mux inputs in - following format: - "clkoutN", where N is a decimal number corresponding to - CLKOUT mux control bits value for given input, e.g. - "clkout0", "clkout7", "clkout15". - - - clocks : list of phandles and specifiers to all input clocks listed in - clock-names property. - -Optional properties: - -Some PMUs are capable of behaving as an interrupt controller (mostly -to wake up a suspended PMU). In which case, they can have the -following properties: - -- interrupt-controller: indicate that said PMU is an interrupt controller - -- #interrupt-cells: must be identical to the that of the parent interrupt - controller. - - -Optional nodes: - -- nodes defining the restart and poweroff syscon children - - -Example : -pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; - reg = <0x10040000 0x5000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - #clock-cells = <1>; - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, - <&clock CLK_XUSBXTI>; -}; - -Example of clock consumer : - -usb3503: usb3503@8 { - /* ... */ - clock-names = "refclk"; - clocks = <&pmu_system_controller 0>; - /* ... */ -}; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml new file mode 100644 index 000000000000..a5a02f8237fb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series Power Management Unit (PMU) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + items: + - enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5260-pmu + - samsung,exynos5410-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + - samsung,exynos7-pmu + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-names: + description: + List of clock names for particular CLKOUT mux inputs + minItems: 1 + maxItems: 32 + items: + enum: + - clkout0 + - clkout1 + - clkout2 + - clkout3 + - clkout4 + - clkout5 + - clkout6 + - clkout7 + - clkout8 + - clkout9 + - clkout10 + - clkout11 + - clkout12 + - clkout13 + - clkout14 + - clkout15 + - clkout16 + - clkout17 + - clkout18 + - clkout19 + - clkout20 + - clkout21 + - clkout22 + - clkout23 + - clkout24 + - clkout25 + - clkout26 + - clkout27 + - clkout28 + - clkout29 + - clkout30 + - clkout31 + + clocks: + minItems: 1 + maxItems: 32 + + interrupt-controller: + description: + Some PMUs are capable of behaving as an interrupt controller (mostly + to wake up a suspended PMU). + + '#interrupt-cells': + description: + Must be identical to the that of the parent interrupt controller. + const: 3 + + syscon-poweroff: + $ref: "../../power/reset/syscon-poweroff.yaml#" + type: object + description: + Node for power off method + + syscon-reboot: + $ref: "../../power/reset/syscon-reboot.yaml#" + type: object + description: + Node for reboot method + +required: + - compatible + - reg + - '#clock-cells' + - clock-names + - clocks + +examples: + - | + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5250-pmu", "syscon"; + reg = <0x10040000 0x5000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + #clock-cells = <1>; + clock-names = "clkout16"; + clocks = <&clock 0>; // CLK_FIN_PLL + };
Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v1: 1. Fix clock-names to match all elements against schema (any number of any clkoutN values). This currently fails: properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2', 'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8', 'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14', 'clkout15', 'clkout16']} is not of type 'array 2. Add syscon reboot and poweroff nodes. --- .../devicetree/bindings/arm/samsung/pmu.txt | 72 ----------- .../devicetree/bindings/arm/samsung/pmu.yaml | 117 ++++++++++++++++++ 2 files changed, 117 insertions(+), 72 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml