@@ -180,6 +180,7 @@ struct ath10k_wmi {
struct wmi_cmd_map *cmd;
struct wmi_vdev_param_map *vdev_param;
struct wmi_pdev_param_map *pdev_param;
+ struct wmi_peer_param_map *peer_param;
const struct wmi_ops *ops;
const struct wmi_peer_flags_map *peer_flags;
@@ -441,7 +441,7 @@ ath10k_dbg_sta_write_peer_debug_trigger(struct file *file,
}
ret = ath10k_wmi_peer_set_param(ar, arsta->arvif->vdev_id, sta->addr,
- WMI_PEER_DEBUG, peer_debug_trigger);
+ ar->wmi.peer_param->debug, peer_debug_trigger);
if (ret) {
ath10k_warn(ar, "failed to set param to trigger peer tid logs for station ret: %d\n",
ret);
@@ -2744,7 +2744,7 @@ static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif,
return -EINVAL;
return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr,
- WMI_PEER_SMPS_STATE,
+ ar->wmi.peer_param->smps_state,
ath10k_smps_map[smps]);
}
@@ -2901,7 +2901,7 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
* poked with peer param command.
*/
ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid,
- WMI_PEER_DUMMY_VAR, 1);
+ ar->wmi.peer_param->dummy_var, 1);
if (ret) {
ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n",
arvif->bssid, arvif->vdev_id, ret);
@@ -6189,7 +6189,7 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (sta && sta->tdls)
ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
- WMI_PEER_AUTHORIZE, 1);
+ ar->wmi.peer_param->authorize, 1);
exit:
mutex_unlock(&ar->conf_mutex);
@@ -6280,7 +6280,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
sta->addr, bw, mode);
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
- WMI_PEER_PHYMODE, mode);
+ ar->wmi.peer_param->phymode, mode);
if (err) {
ath10k_warn(ar, "failed to update STA %pM peer phymode %d: %d\n",
sta->addr, mode, err);
@@ -6288,7 +6288,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
}
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
- WMI_PEER_CHAN_WIDTH, bw);
+ ar->wmi.peer_param->chan_width, bw);
if (err)
ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n",
sta->addr, bw, err);
@@ -6299,7 +6299,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
sta->addr, nss);
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
- WMI_PEER_NSS, nss);
+ ar->wmi.peer_param->nss, nss);
if (err)
ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n",
sta->addr, nss, err);
@@ -6310,7 +6310,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
sta->addr, smps);
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
- WMI_PEER_SMPS_STATE, smps);
+ ar->wmi.peer_param->smps_state, smps);
if (err)
ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n",
sta->addr, smps, err);
@@ -6384,7 +6384,7 @@ static int ath10k_sta_set_txpwr(struct ieee80211_hw *hw,
mutex_lock(&ar->conf_mutex);
ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
- WMI_PEER_USE_FIXED_PWR, txpwr);
+ ar->wmi.peer_param->use_fixed_power, txpwr);
if (ret) {
ath10k_warn(ar, "failed to set tx power for station ret: %d\n",
ret);
@@ -4077,6 +4077,24 @@ static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
.arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED,
};
+static struct wmi_peer_param_map wmi_tlv_peer_param_map = {
+ .smps_state = WMI_TLV_PEER_SMPS_STATE,
+ .ampdu = WMI_TLV_PEER_AMPDU,
+ .authorize = WMI_TLV_PEER_AUTHORIZE,
+ .chan_width = WMI_TLV_PEER_CHAN_WIDTH,
+ .nss = WMI_TLV_PEER_NSS,
+ .use_4addr = WMI_TLV_PEER_USE_4ADDR,
+ .membership = WMI_TLV_PEER_MEMBERSHIP,
+ .user_pos = WMI_TLV_PEER_USERPOS,
+ .crit_proto_hint_enabled = WMI_TLV_PEER_CRIT_PROTO_HINT_ENABLED,
+ .tx_fail_cnt_thr = WMI_TLV_PEER_TX_FAIL_CNT_THR,
+ .set_hw_retry_cts2s = WMI_TLV_PEER_SET_HW_RETRY_CTS2S,
+ .ibss_atim_win_len = WMI_TLV_PEER_IBSS_ATIM_WINDOW_LENGTH,
+ .phymode = WMI_TLV_PEER_PHYMODE,
+ .use_fixed_power = WMI_TLV_PEER_USE_FIXED_PWR,
+ .dummy_var = WMI_TLV_PEER_DUMMY_VAR,
+};
+
static struct wmi_vdev_param_map wmi_tlv_vdev_param_map = {
.rts_threshold = WMI_TLV_VDEV_PARAM_RTS_THRESHOLD,
.fragmentation_threshold = WMI_TLV_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
@@ -4265,6 +4283,7 @@ void ath10k_wmi_tlv_attach(struct ath10k *ar)
ar->wmi.cmd = &wmi_tlv_cmd_map;
ar->wmi.vdev_param = &wmi_tlv_vdev_param_map;
ar->wmi.pdev_param = &wmi_tlv_pdev_param_map;
+ ar->wmi.peer_param = &wmi_tlv_peer_param_map;
ar->wmi.ops = &wmi_tlv_ops;
ar->wmi.peer_flags = &wmi_tlv_peer_flags_map;
}
@@ -533,6 +533,24 @@ enum wmi_tlv_vdev_param {
WMI_TLV_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE,
};
+enum wmi_tlv_peer_param {
+ WMI_TLV_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
+ WMI_TLV_PEER_AMPDU = 0x2,
+ WMI_TLV_PEER_AUTHORIZE = 0x3,
+ WMI_TLV_PEER_CHAN_WIDTH = 0x4,
+ WMI_TLV_PEER_NSS = 0x5,
+ WMI_TLV_PEER_USE_4ADDR = 0x6,
+ WMI_TLV_PEER_MEMBERSHIP = 0x7,
+ WMI_TLV_PEER_USERPOS = 0x8,
+ WMI_TLV_PEER_CRIT_PROTO_HINT_ENABLED = 0x9,
+ WMI_TLV_PEER_TX_FAIL_CNT_THR = 0xa,
+ WMI_TLV_PEER_SET_HW_RETRY_CTS2S = 0xb,
+ WMI_TLV_PEER_IBSS_ATIM_WINDOW_LENGTH = 0xc,
+ WMI_TLV_PEER_PHYMODE = 0xd,
+ WMI_TLV_PEER_USE_FIXED_PWR = 0xe,
+ WMI_TLV_PEER_DUMMY_VAR = 0xff,
+};
+
enum wmi_tlv_peer_flags {
WMI_TLV_PEER_AUTH = 0x00000001,
WMI_TLV_PEER_QOS = 0x00000002,
@@ -753,6 +753,19 @@ static struct wmi_cmd_map wmi_10_4_cmd_map = {
.radar_found_cmdid = WMI_10_4_RADAR_FOUND_CMDID,
};
+static struct wmi_peer_param_map wmi_peer_param_map = {
+ .smps_state = WMI_PEER_SMPS_STATE,
+ .ampdu = WMI_PEER_AMPDU,
+ .authorize = WMI_PEER_AUTHORIZE,
+ .chan_width = WMI_PEER_CHAN_WIDTH,
+ .nss = WMI_PEER_NSS,
+ .use_4addr = WMI_PEER_USE_4ADDR,
+ .use_fixed_power = WMI_PEER_USE_FIXED_PWR,
+ .debug = WMI_PEER_DEBUG,
+ .phymode = WMI_PEER_PHYMODE,
+ .dummy_var = WMI_PEER_DUMMY_VAR,
+};
+
/* MAIN WMI VDEV param map */
static struct wmi_vdev_param_map wmi_vdev_param_map = {
.rts_threshold = WMI_VDEV_PARAM_RTS_THRESHOLD,
@@ -9300,6 +9313,7 @@ int ath10k_wmi_attach(struct ath10k *ar)
ar->wmi.cmd = &wmi_10_4_cmd_map;
ar->wmi.vdev_param = &wmi_10_4_vdev_param_map;
ar->wmi.pdev_param = &wmi_10_4_pdev_param_map;
+ ar->wmi.peer_param = &wmi_peer_param_map;
ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
ar->wmi_key_cipher = wmi_key_cipher_suites;
break;
@@ -9308,6 +9322,7 @@ int ath10k_wmi_attach(struct ath10k *ar)
ar->wmi.ops = &wmi_10_2_4_ops;
ar->wmi.vdev_param = &wmi_10_2_4_vdev_param_map;
ar->wmi.pdev_param = &wmi_10_2_4_pdev_param_map;
+ ar->wmi.peer_param = &wmi_peer_param_map;
ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
ar->wmi_key_cipher = wmi_key_cipher_suites;
break;
@@ -9316,6 +9331,7 @@ int ath10k_wmi_attach(struct ath10k *ar)
ar->wmi.ops = &wmi_10_2_ops;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
+ ar->wmi.peer_param = &wmi_peer_param_map;
ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
ar->wmi_key_cipher = wmi_key_cipher_suites;
break;
@@ -9324,6 +9340,7 @@ int ath10k_wmi_attach(struct ath10k *ar)
ar->wmi.ops = &wmi_10_1_ops;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
+ ar->wmi.peer_param = &wmi_peer_param_map;
ar->wmi.peer_flags = &wmi_10x_peer_flags_map;
ar->wmi_key_cipher = wmi_key_cipher_suites;
break;
@@ -9332,6 +9349,7 @@ int ath10k_wmi_attach(struct ath10k *ar)
ar->wmi.ops = &wmi_ops;
ar->wmi.vdev_param = &wmi_vdev_param_map;
ar->wmi.pdev_param = &wmi_pdev_param_map;
+ ar->wmi.peer_param = &wmi_peer_param_map;
ar->wmi.peer_flags = &wmi_peer_flags_map;
ar->wmi_key_cipher = wmi_key_cipher_suites;
break;
@@ -5083,6 +5083,25 @@ enum wmi_rate_preamble {
/* Value to disable fixed rate setting */
#define WMI_FIXED_RATE_NONE (0xff)
+struct wmi_peer_param_map {
+ u32 smps_state;
+ u32 ampdu;
+ u32 authorize;
+ u32 chan_width;
+ u32 nss;
+ u32 use_4addr;
+ u32 membership;
+ u32 use_fixed_power;
+ u32 user_pos;
+ u32 crit_proto_hint_enabled;
+ u32 tx_fail_cnt_thr;
+ u32 set_hw_retry_cts2s;
+ u32 ibss_atim_win_len;
+ u32 debug;
+ u32 phymode;
+ u32 dummy_var;
+};
+
struct wmi_vdev_param_map {
u32 rts_threshold;
u32 fragmentation_threshold;
The peer param id for PEER_PARAM_USE_FIXED_PWR is different for tlv and non-tlv firmware. This causes incorrect peer param to be set by the driver to the firmware(tlv/non-tlv). Create seperate peer param map for tlv and non-tlv firmware and attach the peer param id based on the firmware type during the init. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> --- This change is dependent on the below patchset ath10k: add support for controlling tx power to a station (https://patchwork.kernel.org/patch/9562405/) --- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/debugfs_sta.c | 2 +- drivers/net/wireless/ath/ath10k/mac.c | 16 ++++++++-------- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 19 +++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.h | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 19 +++++++++++++++++++ 7 files changed, 84 insertions(+), 9 deletions(-)