[0/6] Add the Mobiveil EP and Layerscape Gen4 EP driver support

Message ID	20190916021742.22844-1-xiaowei.bao@nxp.com (mailing list archive)
Headers	show Return-Path: <SRS0=n9Pk=XL=lists.infradead.org=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 2F4D821479 From: Xiaowei Bao <xiaowei.bao@nxp.com> To: Zhiqiang.Hou@nxp.com, bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, leoyang.li@nxp.com, kishon@ti.com, lorenzo.pieralisi@arm.com, Minghuan.Lian@nxp.com, andrew.murray@arm.com, mingkai.hu@nxp.com, linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 0/6] Add the Mobiveil EP and Layerscape Gen4 EP driver support Date: Mon, 16 Sep 2019 10:17:36 +0800 Message-Id: <20190916021742.22844-1-xiaowei.bao@nxp.com> summary: Content analysis details: (-2.3 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [92.121.34.21 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record Precedence: list Cc: Xiaowei Bao <xiaowei.bao@nxp.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
Series	Add the Mobiveil EP and Layerscape Gen4 EP driver support \| expand [0/6] Add the Mobiveil EP and Layerscape Gen4 EP driver support [1/6] PCI: mobiveil: Add the EP driver support [2/6] dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape [3/6] PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs [4/6] PCI: mobiveil: Add workaround for unsupported request error [5/6] arm64: dts: lx2160a: Add PCIe EP node [6/6] misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device support

Xiaowei Bao Sept. 16, 2019, 2:17 a.m. UTC

This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
EP driver of NXP Layerscape platform.

This patch set depends on:
https://patchwork.kernel.org/project/linux-pci/list/?series=159139

Xiaowei Bao (6):
  PCI: mobiveil: Add the EP driver support
  dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
  PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
  PCI: mobiveil: Add workaround for unsupported request error
  arm64: dts: lx2160a: Add PCIe EP node
  misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
    support

 .../bindings/pci/layerscape-pcie-gen4.txt          |  28 +-
 MAINTAINERS                                        |   3 +
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  56 ++
 drivers/misc/pci_endpoint_test.c                   |   2 +
 drivers/pci/controller/mobiveil/Kconfig            |  22 +-
 drivers/pci/controller/mobiveil/Makefile           |   2 +
 .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 169 ++++++
 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
 drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
 drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  72 +++
 10 files changed, 1009 insertions(+), 12 deletions(-)
 create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
 create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c

Russell King (Oracle) Sept. 24, 2019, 2:18 p.m. UTC | #1

On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote:
> This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
> EP driver of NXP Layerscape platform.
> 
> This patch set depends on:
> https://patchwork.kernel.org/project/linux-pci/list/?series=159139
> 
> Xiaowei Bao (6):
>   PCI: mobiveil: Add the EP driver support
>   dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
>   PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
>   PCI: mobiveil: Add workaround for unsupported request error
>   arm64: dts: lx2160a: Add PCIe EP node
>   misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
>     support
> 
>  .../bindings/pci/layerscape-pcie-gen4.txt          |  28 +-
>  MAINTAINERS                                        |   3 +
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  56 ++
>  drivers/misc/pci_endpoint_test.c                   |   2 +
>  drivers/pci/controller/mobiveil/Kconfig            |  22 +-
>  drivers/pci/controller/mobiveil/Makefile           |   2 +
>  .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 169 ++++++
>  drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
>  drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
>  drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  72 +++
>  10 files changed, 1009 insertions(+), 12 deletions(-)
>  create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
>  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c

Hi,

I've applied "PCI: mobiveil: Fix the CPU base address setup in inbound
window" and your patch set to 5.3, which seems to be able to detect the
PCIe card I have plugged in:

layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
layerscape-pcie-gen4 3800000.pcie:   MEM 0xa040000000..0xa07fffffff -> 0x40000000
layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address
[0x40000000-0x7fffffff])
pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
pci 0000:00:00.0: enabling Extended Tags
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: [15b3:6750] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit]
pci 0000:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref]
pci 0000:00:00.0: up support 3 enabled 0
pci 0000:00:00.0: dn support 1 enabled 0
pci 0000:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
pci 0000:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff]
pci 0000:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
pci 0000:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit]
pci 0000:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref]
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0:   bridge window [mem 0xa040800000-0xa0409fffff]
pci 0000:00:00.0:   bridge window [mem 0xa040000000-0xa0407fffff 64bit pref]
pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pcieport 0000:00:00.0: PCIe capabilities: 0x13
pcieport 0000:00:00.0: init_service_irqs: -19

However, a bit later in the kernel boot, I get:

SError Interrupt on CPU1, code 0xbf000002 -- SError
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
Hardware name: SolidRun LX2160A COM express type 7 module (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO)
pc : pci_generic_config_read+0xb0/0xc0
lr : pci_generic_config_read+0x1c/0xc0
sp : ffffff8010f9baf0
x29: ffffff8010f9baf0 x28: ffffff8010d620a0
x27: ffffff8010d79000 x26: ffffff8010d62000
x25: ffffff8010cb06d4 x24: 0000000000000000
x23: ffffff8010e499b8 x22: ffffff8010f9bbaf
x21: 0000000000000000 x20: ffffffe2eda11800
x19: ffffff8010f62158 x18: ffffff8010bdede0
x17: ffffff8010bdede8 x16: ffffff8010b96970
x15: ffffffffffffffff x14: ffffffffff000000
x13: ffffffffffffffff x12: 0000000000000030
x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
x9 : 2dff716475687163 x8 : ffffffffffffffff
x7 : fefefefefefefefe x6 : 0000000000000000
x5 : 0000000000000000 x4 : ffffff8010f9bb6c
x3 : 0000000000000001 x2 : 0000000000000003
x1 : 0000000000000000 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
Hardware name: SolidRun LX2160A COM express type 7 module (DT)
Call trace:
 dump_backtrace+0x0/0x120
 show_stack+0x14/0x1c
 dump_stack+0x9c/0xc0
 panic+0x148/0x34c
 print_tainted+0x0/0xa8
 arm64_serror_panic+0x74/0x80
 do_serror+0x8c/0x13c
 el1_error+0xbc/0x160
 pci_generic_config_read+0xb0/0xc0
 pci_bus_read_config_byte+0x64/0x90
 pci_read_config_byte+0x40/0x48
 pci_assign_irq+0x34/0xc8
 pci_device_probe+0x28/0x148
 really_probe+0x1c4/0x2d0
 driver_probe_device+0x58/0xfc
 device_driver_attach+0x68/0x70
 __driver_attach+0x94/0xdc
 bus_for_each_dev+0x50/0xa0
 driver_attach+0x20/0x28
 bus_add_driver+0x14c/0x200
 driver_register+0x6c/0x124
 __pci_register_driver+0x48/0x50
 mlx4_init+0x154/0x180
 do_one_initcall+0x30/0x250
 kernel_init_freeable+0x23c/0x32c
 kernel_init+0x10/0xfc
 ret_from_fork+0x10/0x18
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,21006008
Memory Limit: none

and there it dies.  Any ideas?

Thanks.

Russell King (Oracle) Sept. 24, 2019, 3:52 p.m. UTC | #2

On Tue, Sep 24, 2019 at 03:18:47PM +0100, Russell King - ARM Linux admin wrote:
> On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote:
> > This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
> > EP driver of NXP Layerscape platform.
> > 
> > This patch set depends on:
> > https://patchwork.kernel.org/project/linux-pci/list/?series=159139
> > 
> > Xiaowei Bao (6):
> >   PCI: mobiveil: Add the EP driver support
> >   dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
> >   PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
> >   PCI: mobiveil: Add workaround for unsupported request error
> >   arm64: dts: lx2160a: Add PCIe EP node
> >   misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
> >     support
> > 
> >  .../bindings/pci/layerscape-pcie-gen4.txt          |  28 +-
> >  MAINTAINERS                                        |   3 +
> >  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  56 ++
> >  drivers/misc/pci_endpoint_test.c                   |   2 +
> >  drivers/pci/controller/mobiveil/Kconfig            |  22 +-
> >  drivers/pci/controller/mobiveil/Makefile           |   2 +
> >  .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 169 ++++++
> >  drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
> >  drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
> >  drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  72 +++
> >  10 files changed, 1009 insertions(+), 12 deletions(-)
> >  create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> >  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
> 
> Hi,
> 
> I've applied "PCI: mobiveil: Fix the CPU base address setup in inbound
> window" and your patch set to 5.3, which seems to be able to detect the
> PCIe card I have plugged in:
> 
> layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
> layerscape-pcie-gen4 3800000.pcie:   MEM 0xa040000000..0xa07fffffff -> 0x40000000
> layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [bus 00-ff]
> pci_bus 0000:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address
> [0x40000000-0x7fffffff])
> pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
> pci 0000:00:00.0: enabling Extended Tags
> pci 0000:00:00.0: supports D1 D2
> pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:01:00.0: [15b3:6750] type 00 class 0x020000
> pci 0000:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit]
> pci 0000:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref]
> pci 0000:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref]
> pci 0000:00:00.0: up support 3 enabled 0
> pci 0000:00:00.0: dn support 1 enabled 0
> pci 0000:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff]
> pci 0000:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit]
> pci 0000:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref]
> pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> pci 0000:00:00.0:   bridge window [mem 0xa040800000-0xa0409fffff]
> pci 0000:00:00.0:   bridge window [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pcieport 0000:00:00.0: PCIe capabilities: 0x13
> pcieport 0000:00:00.0: init_service_irqs: -19
> 
> However, a bit later in the kernel boot, I get:
> 
> SError Interrupt on CPU1, code 0xbf000002 -- SError
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> pstate: 60400085 (nZCv daIf +PAN -UAO)
> pc : pci_generic_config_read+0xb0/0xc0
> lr : pci_generic_config_read+0x1c/0xc0
> sp : ffffff8010f9baf0
> x29: ffffff8010f9baf0 x28: ffffff8010d620a0
> x27: ffffff8010d79000 x26: ffffff8010d62000
> x25: ffffff8010cb06d4 x24: 0000000000000000
> x23: ffffff8010e499b8 x22: ffffff8010f9bbaf
> x21: 0000000000000000 x20: ffffffe2eda11800
> x19: ffffff8010f62158 x18: ffffff8010bdede0
> x17: ffffff8010bdede8 x16: ffffff8010b96970
> x15: ffffffffffffffff x14: ffffffffff000000
> x13: ffffffffffffffff x12: 0000000000000030
> x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
> x9 : 2dff716475687163 x8 : ffffffffffffffff
> x7 : fefefefefefefefe x6 : 0000000000000000
> x5 : 0000000000000000 x4 : ffffff8010f9bb6c
> x3 : 0000000000000001 x2 : 0000000000000003
> x1 : 0000000000000000 x0 : 0000000000000000
> Kernel panic - not syncing: Asynchronous SError Interrupt
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> Call trace:
>  dump_backtrace+0x0/0x120
>  show_stack+0x14/0x1c
>  dump_stack+0x9c/0xc0
>  panic+0x148/0x34c
>  print_tainted+0x0/0xa8
>  arm64_serror_panic+0x74/0x80
>  do_serror+0x8c/0x13c
>  el1_error+0xbc/0x160
>  pci_generic_config_read+0xb0/0xc0
>  pci_bus_read_config_byte+0x64/0x90
>  pci_read_config_byte+0x40/0x48
>  pci_assign_irq+0x34/0xc8
>  pci_device_probe+0x28/0x148
>  really_probe+0x1c4/0x2d0
>  driver_probe_device+0x58/0xfc
>  device_driver_attach+0x68/0x70
>  __driver_attach+0x94/0xdc
>  bus_for_each_dev+0x50/0xa0
>  driver_attach+0x20/0x28
>  bus_add_driver+0x14c/0x200
>  driver_register+0x6c/0x124
>  __pci_register_driver+0x48/0x50
>  mlx4_init+0x154/0x180
>  do_one_initcall+0x30/0x250
>  kernel_init_freeable+0x23c/0x32c
>  kernel_init+0x10/0xfc
>  ret_from_fork+0x10/0x18
> SMP: stopping secondary CPUs
> Kernel Offset: disabled
> CPU features: 0x0002,21006008
> Memory Limit: none
> 
> and there it dies.  Any ideas?

The failing access seems to be:

        pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);

for the Mellanox Ethernet card.  Presumably, being a PCIe ethernet
card, it doesn't implement this register (just a guess), and aborts
the PCI transaction, which is presumably triggering the above SError.

Note that I've used this card with the Macchiatobin (Armada 8040)
without issue.

Bjorn Helgaas Oct. 2, 2019, 9:14 p.m. UTC | #3

On Tue, Sep 24, 2019 at 04:52:23PM +0100, Russell King - ARM Linux admin wrote:
> On Tue, Sep 24, 2019 at 03:18:47PM +0100, Russell King - ARM Linux admin wrote:
> > On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote:
> > > This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
> > > EP driver of NXP Layerscape platform.
> > > 
> > > This patch set depends on:
> > > https://patchwork.kernel.org/project/linux-pci/list/?series=159139
> > > 
> > > Xiaowei Bao (6):
> > >   PCI: mobiveil: Add the EP driver support
> > >   dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
> > >   PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
> > >   PCI: mobiveil: Add workaround for unsupported request error
> > >   arm64: dts: lx2160a: Add PCIe EP node
> > >   misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
> > >     support
> > > 
> > >  .../bindings/pci/layerscape-pcie-gen4.txt          |  28 +-
> > >  MAINTAINERS                                        |   3 +
> > >  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  56 ++
> > >  drivers/misc/pci_endpoint_test.c                   |   2 +
> > >  drivers/pci/controller/mobiveil/Kconfig            |  22 +-
> > >  drivers/pci/controller/mobiveil/Makefile           |   2 +
> > >  .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 169 ++++++
> > >  drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
> > >  drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
> > >  drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  72 +++
> > >  10 files changed, 1009 insertions(+), 12 deletions(-)
> > >  create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > >  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
> > 
> > Hi,
> > 
> > I've applied "PCI: mobiveil: Fix the CPU base address setup in inbound
> > window" and your patch set to 5.3, which seems to be able to detect the
> > PCIe card I have plugged in:
> > 
> > layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
> > layerscape-pcie-gen4 3800000.pcie:   MEM 0xa040000000..0xa07fffffff -> 0x40000000
> > layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0000:00
> > pci_bus 0000:00: root bus resource [bus 00-ff]
> > pci_bus 0000:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address
> > [0x40000000-0x7fffffff])
> > pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
> > pci 0000:00:00.0: enabling Extended Tags
> > pci 0000:00:00.0: supports D1 D2
> > pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > pci 0000:01:00.0: [15b3:6750] type 00 class 0x020000
> > pci 0000:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit]
> > pci 0000:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref]
> > pci 0000:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref]
> > pci 0000:00:00.0: up support 3 enabled 0
> > pci 0000:00:00.0: dn support 1 enabled 0
> > pci 0000:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> > pci 0000:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff]
> > pci 0000:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> > pci 0000:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit]
> > pci 0000:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref]
> > pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> > pci 0000:00:00.0:   bridge window [mem 0xa040800000-0xa0409fffff]
> > pci 0000:00:00.0:   bridge window [mem 0xa040000000-0xa0407fffff 64bit pref]
> > pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pcieport 0000:00:00.0: PCIe capabilities: 0x13
> > pcieport 0000:00:00.0: init_service_irqs: -19
> > 
> > However, a bit later in the kernel boot, I get:
> > 
> > SError Interrupt on CPU1, code 0xbf000002 -- SError
> > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> > Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> > pstate: 60400085 (nZCv daIf +PAN -UAO)
> > pc : pci_generic_config_read+0xb0/0xc0
> > lr : pci_generic_config_read+0x1c/0xc0
> > sp : ffffff8010f9baf0
> > x29: ffffff8010f9baf0 x28: ffffff8010d620a0
> > x27: ffffff8010d79000 x26: ffffff8010d62000
> > x25: ffffff8010cb06d4 x24: 0000000000000000
> > x23: ffffff8010e499b8 x22: ffffff8010f9bbaf
> > x21: 0000000000000000 x20: ffffffe2eda11800
> > x19: ffffff8010f62158 x18: ffffff8010bdede0
> > x17: ffffff8010bdede8 x16: ffffff8010b96970
> > x15: ffffffffffffffff x14: ffffffffff000000
> > x13: ffffffffffffffff x12: 0000000000000030
> > x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
> > x9 : 2dff716475687163 x8 : ffffffffffffffff
> > x7 : fefefefefefefefe x6 : 0000000000000000
> > x5 : 0000000000000000 x4 : ffffff8010f9bb6c
> > x3 : 0000000000000001 x2 : 0000000000000003
> > x1 : 0000000000000000 x0 : 0000000000000000
> > Kernel panic - not syncing: Asynchronous SError Interrupt
> > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> > Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> > Call trace:
> >  dump_backtrace+0x0/0x120
> >  show_stack+0x14/0x1c
> >  dump_stack+0x9c/0xc0
> >  panic+0x148/0x34c
> >  print_tainted+0x0/0xa8
> >  arm64_serror_panic+0x74/0x80
> >  do_serror+0x8c/0x13c
> >  el1_error+0xbc/0x160
> >  pci_generic_config_read+0xb0/0xc0
> >  pci_bus_read_config_byte+0x64/0x90
> >  pci_read_config_byte+0x40/0x48
> >  pci_assign_irq+0x34/0xc8
> >  pci_device_probe+0x28/0x148
> >  really_probe+0x1c4/0x2d0
> >  driver_probe_device+0x58/0xfc
> >  device_driver_attach+0x68/0x70
> >  __driver_attach+0x94/0xdc
> >  bus_for_each_dev+0x50/0xa0
> >  driver_attach+0x20/0x28
> >  bus_add_driver+0x14c/0x200
> >  driver_register+0x6c/0x124
> >  __pci_register_driver+0x48/0x50
> >  mlx4_init+0x154/0x180
> >  do_one_initcall+0x30/0x250
> >  kernel_init_freeable+0x23c/0x32c
> >  kernel_init+0x10/0xfc
> >  ret_from_fork+0x10/0x18
> > SMP: stopping secondary CPUs
> > Kernel Offset: disabled
> > CPU features: 0x0002,21006008
> > Memory Limit: none
> > 
> > and there it dies.  Any ideas?
> 
> The failing access seems to be:
> 
>         pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
> 
> for the Mellanox Ethernet card.  Presumably, being a PCIe ethernet
> card, it doesn't implement this register (just a guess), and aborts
> the PCI transaction, which is presumably triggering the above SError.

PCIe r5.0, sec 7.5.1.1.13, says Interrupt Pin is a read-only register,
so there shouldn't be an issue with reading it.

mobiveil_pcie_ops uses the generic pci_generic_config_read(), which
will perform a readb() in this case.  Could mobiveil be a bridge that
only supports 32-bit config accesses?

> Note that I've used this card with the Macchiatobin (Armada 8040)
> without issue.
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
> According to speedtest.net: 11.9Mbps down 500kbps up

Russell King (Oracle) Oct. 2, 2019, 9:59 p.m. UTC | #4

On Wed, Oct 02, 2019 at 04:14:21PM -0500, Bjorn Helgaas wrote:
> On Tue, Sep 24, 2019 at 04:52:23PM +0100, Russell King - ARM Linux admin wrote:
> > On Tue, Sep 24, 2019 at 03:18:47PM +0100, Russell King - ARM Linux admin wrote:
> > > On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote:
> > > > This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
> > > > EP driver of NXP Layerscape platform.
> > > > 
> > > > This patch set depends on:
> > > > https://patchwork.kernel.org/project/linux-pci/list/?series=159139
> > > > 
> > > > Xiaowei Bao (6):
> > > >   PCI: mobiveil: Add the EP driver support
> > > >   dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
> > > >   PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
> > > >   PCI: mobiveil: Add workaround for unsupported request error
> > > >   arm64: dts: lx2160a: Add PCIe EP node
> > > >   misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
> > > >     support
> > > > 
> > > >  .../bindings/pci/layerscape-pcie-gen4.txt          |  28 +-
> > > >  MAINTAINERS                                        |   3 +
> > > >  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  56 ++
> > > >  drivers/misc/pci_endpoint_test.c                   |   2 +
> > > >  drivers/pci/controller/mobiveil/Kconfig            |  22 +-
> > > >  drivers/pci/controller/mobiveil/Makefile           |   2 +
> > > >  .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 169 ++++++
> > > >  drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
> > > >  drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
> > > >  drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  72 +++
> > > >  10 files changed, 1009 insertions(+), 12 deletions(-)
> > > >  create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > > >  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
> > > 
> > > Hi,
> > > 
> > > I've applied "PCI: mobiveil: Fix the CPU base address setup in inbound
> > > window" and your patch set to 5.3, which seems to be able to detect the
> > > PCIe card I have plugged in:
> > > 
> > > layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
> > > layerscape-pcie-gen4 3800000.pcie:   MEM 0xa040000000..0xa07fffffff -> 0x40000000
> > > layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0000:00
> > > pci_bus 0000:00: root bus resource [bus 00-ff]
> > > pci_bus 0000:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address
> > > [0x40000000-0x7fffffff])
> > > pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
> > > pci 0000:00:00.0: enabling Extended Tags
> > > pci 0000:00:00.0: supports D1 D2
> > > pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > > pci 0000:01:00.0: [15b3:6750] type 00 class 0x020000
> > > pci 0000:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit]
> > > pci 0000:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref]
> > > pci 0000:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref]
> > > pci 0000:00:00.0: up support 3 enabled 0
> > > pci 0000:00:00.0: dn support 1 enabled 0
> > > pci 0000:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> > > pci 0000:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff]
> > > pci 0000:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> > > pci 0000:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit]
> > > pci 0000:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref]
> > > pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> > > pci 0000:00:00.0:   bridge window [mem 0xa040800000-0xa0409fffff]
> > > pci 0000:00:00.0:   bridge window [mem 0xa040000000-0xa0407fffff 64bit pref]
> > > pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pcieport 0000:00:00.0: PCIe capabilities: 0x13
> > > pcieport 0000:00:00.0: init_service_irqs: -19
> > > 
> > > However, a bit later in the kernel boot, I get:
> > > 
> > > SError Interrupt on CPU1, code 0xbf000002 -- SError
> > > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> > > Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> > > pstate: 60400085 (nZCv daIf +PAN -UAO)
> > > pc : pci_generic_config_read+0xb0/0xc0
> > > lr : pci_generic_config_read+0x1c/0xc0
> > > sp : ffffff8010f9baf0
> > > x29: ffffff8010f9baf0 x28: ffffff8010d620a0
> > > x27: ffffff8010d79000 x26: ffffff8010d62000
> > > x25: ffffff8010cb06d4 x24: 0000000000000000
> > > x23: ffffff8010e499b8 x22: ffffff8010f9bbaf
> > > x21: 0000000000000000 x20: ffffffe2eda11800
> > > x19: ffffff8010f62158 x18: ffffff8010bdede0
> > > x17: ffffff8010bdede8 x16: ffffff8010b96970
> > > x15: ffffffffffffffff x14: ffffffffff000000
> > > x13: ffffffffffffffff x12: 0000000000000030
> > > x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
> > > x9 : 2dff716475687163 x8 : ffffffffffffffff
> > > x7 : fefefefefefefefe x6 : 0000000000000000
> > > x5 : 0000000000000000 x4 : ffffff8010f9bb6c
> > > x3 : 0000000000000001 x2 : 0000000000000003
> > > x1 : 0000000000000000 x0 : 0000000000000000
> > > Kernel panic - not syncing: Asynchronous SError Interrupt
> > > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> > > Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> > > Call trace:
> > >  dump_backtrace+0x0/0x120
> > >  show_stack+0x14/0x1c
> > >  dump_stack+0x9c/0xc0
> > >  panic+0x148/0x34c
> > >  print_tainted+0x0/0xa8
> > >  arm64_serror_panic+0x74/0x80
> > >  do_serror+0x8c/0x13c
> > >  el1_error+0xbc/0x160
> > >  pci_generic_config_read+0xb0/0xc0
> > >  pci_bus_read_config_byte+0x64/0x90
> > >  pci_read_config_byte+0x40/0x48
> > >  pci_assign_irq+0x34/0xc8
> > >  pci_device_probe+0x28/0x148
> > >  really_probe+0x1c4/0x2d0
> > >  driver_probe_device+0x58/0xfc
> > >  device_driver_attach+0x68/0x70
> > >  __driver_attach+0x94/0xdc
> > >  bus_for_each_dev+0x50/0xa0
> > >  driver_attach+0x20/0x28
> > >  bus_add_driver+0x14c/0x200
> > >  driver_register+0x6c/0x124
> > >  __pci_register_driver+0x48/0x50
> > >  mlx4_init+0x154/0x180
> > >  do_one_initcall+0x30/0x250
> > >  kernel_init_freeable+0x23c/0x32c
> > >  kernel_init+0x10/0xfc
> > >  ret_from_fork+0x10/0x18
> > > SMP: stopping secondary CPUs
> > > Kernel Offset: disabled
> > > CPU features: 0x0002,21006008
> > > Memory Limit: none
> > > 
> > > and there it dies.  Any ideas?
> > 
> > The failing access seems to be:
> > 
> >         pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
> > 
> > for the Mellanox Ethernet card.  Presumably, being a PCIe ethernet
> > card, it doesn't implement this register (just a guess), and aborts
> > the PCI transaction, which is presumably triggering the above SError.
> 
> PCIe r5.0, sec 7.5.1.1.13, says Interrupt Pin is a read-only register,
> so there shouldn't be an issue with reading it.
> 
> mobiveil_pcie_ops uses the generic pci_generic_config_read(), which
> will perform a readb() in this case.  Could mobiveil be a bridge that
> only supports 32-bit config accesses?

I have it solved through private discussion.

Essentially, however, the patch set which has been sent for mainline
seems to fail for (some? all?) PCIe cards in this way.  I'm lead to
believe that the work-arounds for this for the LX2160A can't be
mainlined.

There's two patches published in the publically available QiorQ tree
that seem to be necessary:

PCI: mobiveil: ls_pcie_g4: add Workaround for A-011577

    PCIe configuration access to non-existent function triggered
    SERROR interrupt exception.

    Workaround:
    Disable error reporting on AXI bus during the Vendor ID read
    transactions in enumeration.

    This ERRATA is only for LX2160A Rev1.0, and it will be fixed
    in Rev2.0.

PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451

    When LX2 PCIe controller is sending multiple split completions and
    ACK latency expires indicating that ACK should be send at priority.
    But because of large number of split completions and FC update DLLP,
    the controller does not give priority to ACK transmission. This
    results into ACK latency timer timeout error at the link partner and
    the pending TLPs are replayed by the link partner again.

    Workaround:
    1. Reduce the ACK latency timeout value to a very small value.
    2. Restrict the number of completions from the LX2 PCIe controller
       to 1, by changing the Max Read Request Size (MRRS) of link partner
       to the same value as Max Packet size (MPS).

    This patch implemented part 1, the part 2 can be set by kernel parameter
    'pci=pcie_bus_perf'

    This ERRATA is only for LX2160A Rev1.0, and it will be fixed
    in Rev2.0.

and a third to fix the problem I'm seeing (which modifies the first
of the above two patches), which afaik has not been published in
the QiorQ tree.

Andrew Murray Oct. 9, 2019, 9:44 a.m. UTC | #5

On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote:
> This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
> EP driver of NXP Layerscape platform.
> 
> This patch set depends on:
> https://patchwork.kernel.org/project/linux-pci/list/?series=159139
> 

I've not had any feedback on this earlier series (in your link), I was
planning to review *this* patchset after that.

Thanks,

Andrew Murray

> Xiaowei Bao (6):
>   PCI: mobiveil: Add the EP driver support
>   dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
>   PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
>   PCI: mobiveil: Add workaround for unsupported request error
>   arm64: dts: lx2160a: Add PCIe EP node
>   misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
>     support
> 
>  .../bindings/pci/layerscape-pcie-gen4.txt          |  28 +-
>  MAINTAINERS                                        |   3 +
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  56 ++
>  drivers/misc/pci_endpoint_test.c                   |   2 +
>  drivers/pci/controller/mobiveil/Kconfig            |  22 +-
>  drivers/pci/controller/mobiveil/Makefile           |   2 +
>  .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 169 ++++++
>  drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
>  drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
>  drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  72 +++
>  10 files changed, 1009 insertions(+), 12 deletions(-)
>  create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
>  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
> 
> -- 
> 2.9.5
>

[0/6] Add the Mobiveil EP and Layerscape Gen4 EP driver support

Message

Comments