@@ -207,8 +207,8 @@ config DRM_RADEON
tristate "ATI Radeon"
depends on DRM && PCI && MMU
select FW_LOADER
- select DRM_KMS_HELPER
- select DRM_TTM
+ select DRM_KMS_HELPER
+ select DRM_TTM
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
@@ -226,9 +226,9 @@ config DRM_AMDGPU
tristate "AMD GPU"
depends on DRM && PCI && MMU
select FW_LOADER
- select DRM_KMS_HELPER
+ select DRM_KMS_HELPER
select DRM_SCHED
- select DRM_TTM
+ select DRM_TTM
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
@@ -266,7 +266,7 @@ config DRM_VKMS
If M is selected the module will be called vkms.
config DRM_ATI_PCIGART
- bool
+ bool
source "drivers/gpu/drm/exynos/Kconfig"
@@ -23,16 +23,16 @@ config DRM_AMD_DC_DCN2_0
depends on DRM_AMD_DC && X86
depends on DRM_AMD_DC_DCN1_0
help
- Choose this option if you want to have
- Navi support for display engine
+ Choose this option if you want to have
+ Navi support for display engine
config DRM_AMD_DC_DCN2_1
- bool "DCN 2.1 family"
- depends on DRM_AMD_DC && X86
- depends on DRM_AMD_DC_DCN2_0
- help
- Choose this option if you want to have
- Renoir support for display engine
+ bool "DCN 2.1 family"
+ depends on DRM_AMD_DC && X86
+ depends on DRM_AMD_DC_DCN2_0
+ help
+ Choose this option if you want to have
+ Renoir support for display engine
config DRM_AMD_DC_DSC_SUPPORT
bool "DSC support"
@@ -41,16 +41,16 @@ config DRM_AMD_DC_DSC_SUPPORT
depends on DRM_AMD_DC_DCN1_0
depends on DRM_AMD_DC_DCN2_0
help
- Choose this option if you want to have
- Dynamic Stream Compression support
+ Choose this option if you want to have
+ Dynamic Stream Compression support
config DRM_AMD_DC_HDCP
- bool "Enable HDCP support in DC"
- depends on DRM_AMD_DC
- help
- Choose this option
- if you want to support
- HDCP authentication
+ bool "Enable HDCP support in DC"
+ depends on DRM_AMD_DC
+ help
+ Choose this option
+ if you want to support
+ HDCP authentication
config DEBUG_KERNEL_DC
bool "Enable kgdb break in DC"
@@ -60,10 +60,10 @@ config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
select DRM_KMS_HELPER
select DRM_PANEL
---help---
- This is a driver for the display bridges of
- GE B850v3 that convert dual channel LVDS
- to DP++. This is used with the i.MX6 imx-ldb
- driver. You are likely to say N here.
+ This is a driver for the display bridges of
+ GE B850v3 that convert dual channel LVDS
+ to DP++. This is used with the i.MX6 imx-ldb
+ driver. You are likely to say N here.
config DRM_NXP_PTN3460
tristate "NXP PTN3460 DP/LVDS bridge"
@@ -76,7 +76,7 @@ config DRM_I915_CAPTURE_ERROR
This option enables capturing the GPU state when a hang is detected.
This information is vital for triaging hangs and assists in debugging.
Please report any hang to
- https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
+ https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
for triaging.
If in doubt, say "Y".
@@ -105,11 +105,11 @@ config DRM_I915_USERPTR
If in doubt, say "Y".
config DRM_I915_GVT
- bool "Enable Intel GVT-g graphics virtualization host support"
- depends on DRM_I915
- depends on 64BIT
- default n
- help
+ bool "Enable Intel GVT-g graphics virtualization host support"
+ depends on DRM_I915
+ depends on 64BIT
+ default n
+ help
Choose this option if you want to enable Intel GVT-g graphics
virtualization technology host support with integrated graphics.
With GVT-g, it's possible to have one integrated graphics
@@ -1,34 +1,34 @@
# SPDX-License-Identifier: GPL-2.0-only
config DRM_I915_WERROR
- bool "Force GCC to throw an error instead of a warning when compiling"
- # As this may inadvertently break the build, only allow the user
- # to shoot oneself in the foot iff they aim really hard
- depends on EXPERT
- # We use the dependency on !COMPILE_TEST to not be enabled in
- # allmodconfig or allyesconfig configurations
- depends on !COMPILE_TEST
+ bool "Force GCC to throw an error instead of a warning when compiling"
+ # As this may inadvertently break the build, only allow the user
+ # to shoot oneself in the foot iff they aim really hard
+ depends on EXPERT
+ # We use the dependency on !COMPILE_TEST to not be enabled in
+ # allmodconfig or allyesconfig configurations
+ depends on !COMPILE_TEST
select HEADER_TEST
- default n
- help
- Add -Werror to the build flags for (and only for) i915.ko.
- Do not enable this unless you are writing code for the i915.ko module.
+ default n
+ help
+ Add -Werror to the build flags for (and only for) i915.ko.
+ Do not enable this unless you are writing code for the i915.ko module.
- Recommended for driver developers only.
+ Recommended for driver developers only.
- If in doubt, say "N".
+ If in doubt, say "N".
config DRM_I915_DEBUG
- bool "Enable additional driver debugging"
- depends on DRM_I915
- select DEBUG_FS
- select PREEMPT_COUNT
- select REFCOUNT_FULL
- select I2C_CHARDEV
- select STACKDEPOT
- select DRM_DP_AUX_CHARDEV
- select X86_MSR # used by igt/pm_rpm
- select DRM_VGEM # used by igt/prime_vgem (dmabuf interop checks)
- select DRM_DEBUG_MM if DRM=y
+ bool "Enable additional driver debugging"
+ depends on DRM_I915
+ select DEBUG_FS
+ select PREEMPT_COUNT
+ select REFCOUNT_FULL
+ select I2C_CHARDEV
+ select STACKDEPOT
+ select DRM_DP_AUX_CHARDEV
+ select X86_MSR # used by igt/pm_rpm
+ select DRM_VGEM # used by igt/prime_vgem (dmabuf interop checks)
+ select DRM_DEBUG_MM if DRM=y
select DRM_DEBUG_SELFTEST
select DMABUF_SELFTESTS
select SW_SYNC # signaling validation framework (igt/syncobj*)
@@ -36,14 +36,14 @@ config DRM_I915_DEBUG
select DRM_I915_SELFTEST
select DRM_I915_DEBUG_RUNTIME_PM
select DRM_I915_DEBUG_MMIO
- default n
- help
- Choose this option to turn on extra driver debugging that may affect
- performance but will catch some internal issues.
+ default n
+ help
+ Choose this option to turn on extra driver debugging that may affect
+ performance but will catch some internal issues.
- Recommended for driver developers only.
+ Recommended for driver developers only.
- If in doubt, say "N".
+ If in doubt, say "N".
config DRM_I915_DEBUG_MMIO
bool "Always insert extra checks around mmio access by default"
@@ -59,16 +59,16 @@ config DRM_I915_DEBUG_MMIO
If in doubt, say "N".
config DRM_I915_DEBUG_GEM
- bool "Insert extra checks into the GEM internals"
- default n
- depends on DRM_I915_WERROR
- help
- Enable extra sanity checks (including BUGs) along the GEM driver
- paths that may slow the system down and if hit hang the machine.
+ bool "Insert extra checks into the GEM internals"
+ default n
+ depends on DRM_I915_WERROR
+ help
+ Enable extra sanity checks (including BUGs) along the GEM driver
+ paths that may slow the system down and if hit hang the machine.
- Recommended for driver developers only.
+ Recommended for driver developers only.
- If in doubt, say "N".
+ If in doubt, say "N".
config DRM_I915_ERRLOG_GEM
bool "Insert extra logging (very verbose) for common GEM errors"
@@ -111,41 +111,41 @@ config DRM_I915_TRACE_GTT
If in doubt, say "N".
config DRM_I915_SW_FENCE_DEBUG_OBJECTS
- bool "Enable additional driver debugging for fence objects"
- depends on DRM_I915
- select DEBUG_OBJECTS
- default n
- help
- Choose this option to turn on extra driver debugging that may affect
- performance but will catch some internal issues.
+ bool "Enable additional driver debugging for fence objects"
+ depends on DRM_I915
+ select DEBUG_OBJECTS
+ default n
+ help
+ Choose this option to turn on extra driver debugging that may affect
+ performance but will catch some internal issues.
- Recommended for driver developers only.
+ Recommended for driver developers only.
- If in doubt, say "N".
+ If in doubt, say "N".
config DRM_I915_SW_FENCE_CHECK_DAG
- bool "Enable additional driver debugging for detecting dependency cycles"
- depends on DRM_I915
- default n
- help
- Choose this option to turn on extra driver debugging that may affect
- performance but will catch some internal issues.
+ bool "Enable additional driver debugging for detecting dependency cycles"
+ depends on DRM_I915
+ default n
+ help
+ Choose this option to turn on extra driver debugging that may affect
+ performance but will catch some internal issues.
- Recommended for driver developers only.
+ Recommended for driver developers only.
- If in doubt, say "N".
+ If in doubt, say "N".
config DRM_I915_DEBUG_GUC
- bool "Enable additional driver debugging for GuC"
- depends on DRM_I915
- default n
- help
- Choose this option to turn on extra driver debugging that may affect
- performance but will help resolve GuC related issues.
+ bool "Enable additional driver debugging for GuC"
+ depends on DRM_I915
+ default n
+ help
+ Choose this option to turn on extra driver debugging that may affect
+ performance but will help resolve GuC related issues.
- Recommended for driver developers only.
+ Recommended for driver developers only.
- If in doubt, say "N".
+ If in doubt, say "N".
config DRM_I915_SELFTEST
bool "Enable selftests upon driver load"
@@ -178,15 +178,15 @@ config DRM_I915_SELFTEST_BROKEN
If in doubt, say "N".
config DRM_I915_LOW_LEVEL_TRACEPOINTS
- bool "Enable low level request tracing events"
- depends on DRM_I915
- default n
- help
- Choose this option to turn on low level request tracing events.
- This provides the ability to precisely monitor engine utilisation
- and also analyze the request dependency resolving timeline.
-
- If in doubt, say "N".
+ bool "Enable low level request tracing events"
+ depends on DRM_I915
+ default n
+ help
+ Choose this option to turn on low level request tracing events.
+ This provides the ability to precisely monitor engine utilisation
+ and also analyze the request dependency resolving timeline.
+
+ If in doubt, say "N".
config DRM_I915_DEBUG_VBLANK_EVADE
bool "Enable extra debug warnings for vblank evasion"
@@ -10,4 +10,4 @@ config DRM_LIMA
depends on OF
select DRM_SCHED
help
- DRM driver for ARM Mali 400/450 GPUs.
+ DRM driver for ARM Mali 400/450 GPUs.
@@ -6,8 +6,8 @@ config DRM_MGAG200
select DRM_VRAM_HELPER
help
This is a KMS driver for the MGA G200 server chips, it
- does not support the original MGA G200 or any of the desktop
- chips. It requires 0.3.0 of the modesetting userspace driver,
- and a version of mga driver that will fail on KMS enabled
- devices.
+ does not support the original MGA G200 or any of the desktop
+ chips. It requires 0.3.0 of the modesetting userspace driver,
+ and a version of mga driver that will fail on KMS enabled
+ devices.
@@ -2,7 +2,7 @@
config DRM_NOUVEAU
tristate "Nouveau (NVIDIA) cards"
depends on DRM && PCI && MMU
- select FW_LOADER
+ select FW_LOADER
select DRM_KMS_HELPER
select DRM_TTM
select BACKLIGHT_CLASS_DEVICE if DRM_NOUVEAU_BACKLIGHT
@@ -8,18 +8,18 @@ config DRM_OMAP_ENCODER_OPA362
through a GPIO.
config DRM_OMAP_ENCODER_TPD12S015
- tristate "TPD12S015 HDMI ESD protection and level shifter"
+ tristate "TPD12S015 HDMI ESD protection and level shifter"
help
Driver for TPD12S015, which offers HDMI ESD protection and level
shifting.
config DRM_OMAP_CONNECTOR_HDMI
- tristate "HDMI Connector"
+ tristate "HDMI Connector"
help
Driver for a generic HDMI connector.
config DRM_OMAP_CONNECTOR_ANALOG_TV
- tristate "Analog TV Connector"
+ tristate "Analog TV Connector"
help
Driver for a generic analog TV connector.
@@ -6,12 +6,12 @@ config OMAP_DSS_BASE
tristate
menuconfig OMAP2_DSS
- tristate "OMAP2+ Display Subsystem support"
+ tristate "OMAP2+ Display Subsystem support"
select OMAP_DSS_BASE
select VIDEOMODE_HELPERS
select OMAP2_DSS_INIT
select HDMI
- help
+ help
OMAP2+ Display Subsystem support.
if OMAP2_DSS
@@ -52,7 +52,7 @@ config OMAP2_DSS_DPI
config OMAP2_DSS_VENC
bool "VENC support"
- default y
+ default y
help
OMAP Video Encoder support for S-Video and composite TV-out.
@@ -61,7 +61,7 @@ config OMAP2_DSS_HDMI_COMMON
config OMAP4_DSS_HDMI
bool "HDMI support for OMAP4"
- default y
+ default y
select OMAP2_DSS_HDMI_COMMON
help
HDMI support for OMAP4 based SoCs.
@@ -85,7 +85,7 @@ config OMAP5_DSS_HDMI
config OMAP2_DSS_SDI
bool "SDI support"
- default n
+ default n
help
SDI (Serial Display Interface) support.
@@ -94,7 +94,7 @@ config OMAP2_DSS_SDI
config OMAP2_DSS_DSI
bool "DSI support"
- default n
+ default n
help
MIPI DSI (Display Serial Interface) support.
@@ -28,17 +28,17 @@ config ROCKCHIP_ANALOGIX_DP
on RK3288 or RK3399 based SoC, you should select this option.
config ROCKCHIP_CDN_DP
- bool "Rockchip cdn DP"
+ bool "Rockchip cdn DP"
depends on EXTCON=y || (EXTCON=m && DRM_ROCKCHIP=m)
- help
+ help
This selects support for Rockchip SoC specific extensions
for the cdn DP driver. If you want to enable Dp on
RK3399 based SoC, you should select this
option.
config ROCKCHIP_DW_HDMI
- bool "Rockchip specific extensions for Synopsys DW HDMI"
- help
+ bool "Rockchip specific extensions for Synopsys DW HDMI"
+ help
This selects support for Rockchip SoC specific extensions
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 or RK3399 based SoC, you should select
@@ -8,4 +8,4 @@ config DRM_UDL
select DRM_KMS_HELPER
help
This is a KMS driver for the USB displaylink video adapters.
- Say M/Y to add support for these devices via drm/kms interfaces.
+ Say M/Y to add support for these devices via drm/kms interfaces.
@@ -28,6 +28,6 @@ config VGA_SWITCHEROO
help
Many laptops released in 2008/9/10 have two GPUs with a multiplexer
to switch between them. This adds support for dynamic switching when
- X isn't running and delayed switching until the next logoff. This
+ X isn't running and delayed switching until the next logoff. This
feature is called hybrid graphics, ATI PowerXpress, and Nvidia
HybridPower.
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v1: 1. Fix also DRM_AMD_DC_HDCP (new arrival since v1). --- drivers/gpu/drm/Kconfig | 10 +- drivers/gpu/drm/amd/display/Kconfig | 32 ++--- drivers/gpu/drm/bridge/Kconfig | 8 +- drivers/gpu/drm/i915/Kconfig | 12 +- drivers/gpu/drm/i915/Kconfig.debug | 144 +++++++++++------------ drivers/gpu/drm/lima/Kconfig | 2 +- drivers/gpu/drm/mgag200/Kconfig | 8 +- drivers/gpu/drm/nouveau/Kconfig | 2 +- drivers/gpu/drm/omapdrm/displays/Kconfig | 6 +- drivers/gpu/drm/omapdrm/dss/Kconfig | 12 +- drivers/gpu/drm/rockchip/Kconfig | 8 +- drivers/gpu/drm/udl/Kconfig | 2 +- drivers/gpu/vga/Kconfig | 2 +- 13 files changed, 124 insertions(+), 124 deletions(-)