| Message ID | 20191004162906.4818-1-jckuo@nvidia.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | add Tegra194 XUSB host and pad controller support | expand |
On Sat, Oct 05, 2019 at 12:28:59AM +0800, JC Kuo wrote: > Hi, > > This series introduces support for Tegra194 XUSB host and pad > controller. Tegra194 XUSB host and pad controller are highly > similar to the controllers found on Tegra186. Therefore, it's > possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. I've taken patches 1 and 2 through my USB tree. If you want/need me to take the others, please get acks from those maintainers on them so I can do so. thanks, greg k-h
On Mon, Oct 07, 2019 at 01:03:11PM +0200, Greg KH wrote: > On Sat, Oct 05, 2019 at 12:28:59AM +0800, JC Kuo wrote: > > Hi, > > > > This series introduces support for Tegra194 XUSB host and pad > > controller. Tegra194 XUSB host and pad controller are highly > > similar to the controllers found on Tegra186. Therefore, it's > > possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. > > I've taken patches 1 and 2 through my USB tree. If you want/need me to > take the others, please get acks from those maintainers on them so I can > do so. I can pick up patches 6 and 7 into the Tegra tree. There are a few patches in there already that conflict with the DT changes in this series and those will be easier to resolve in the Tegra tree. JC, I noticed that you didn't Cc Kishon as the PHY subsystem maintainer. Please resend the series with Kishon added in the To: line to make sure he sees them and can apply or ack them. Given that Greg's already applied patches 1 and 2, maybe leave them out of the series. Thierry
On 10/8/19 7:29 PM, Thierry Reding wrote: > On Mon, Oct 07, 2019 at 01:03:11PM +0200, Greg KH wrote: >> On Sat, Oct 05, 2019 at 12:28:59AM +0800, JC Kuo wrote: >>> Hi, >>> >>> This series introduces support for Tegra194 XUSB host and pad >>> controller. Tegra194 XUSB host and pad controller are highly >>> similar to the controllers found on Tegra186. Therefore, it's >>> possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. >> >> I've taken patches 1 and 2 through my USB tree. If you want/need me to >> take the others, please get acks from those maintainers on them so I can >> do so. > > I can pick up patches 6 and 7 into the Tegra tree. There are a few > patches in there already that conflict with the DT changes in this > series and those will be easier to resolve in the Tegra tree. > > JC, I noticed that you didn't Cc Kishon as the PHY subsystem maintainer. > Please resend the series with Kishon added in the To: line to make sure > he sees them and can apply or ack them. > > Given that Greg's already applied patches 1 and 2, maybe leave them out > of the series. Thanks Thierry. I will send v4 accordingly. > > Thierry >
Hi, This series introduces support for Tegra194 XUSB host and pad controller. Tegra194 XUSB host and pad controller are highly similar to the controllers found on Tegra186. Therefore, it's possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. Changelog: v3: add change log to cover latter v2: xhci: tegra: Parameterize mailbox register addresses - no change usb: host: xhci-tegra: Add Tegra194 XHCI support - no change phy: tegra: xusb: Protect Tegra186 soc with config - new patch to protect Tegra186 soc data with config phy: tegra: xusb: Add Tegra194 support - removed unnecessary #if/#endif pairs - introduce new soc->supports_gen2 flag which indicate whether or not a soc supports USB 3.1 Gen 2 speed dt-bindings: phy: tegra: Add Tegra194 support - fix a typo arm64: tegra: Add XUSB and pad controller on Tegra194 - renamed xhci@3610000 with usb@3610000 - moved padctl@3520000 and usb@3610000 inside /cbb - cleaned up "clocks" property of usb@3610000 node - added blanks lines to visually separate blocks arm64: tegra: Enable XUSB host in P2972-0000 board - use capitalization of regulator names - fix gpio property of VDD_5V_SATA regulator JC Kuo (7): xhci: tegra: Parameterize mailbox register addresses usb: host: xhci-tegra: Add Tegra194 XHCI support phy: tegra: xusb: Protect Tegra186 soc with config phy: tegra: xusb: Add Tegra194 support dt-bindings: phy: tegra: Add Tegra194 support arm64: tegra: Add XUSB and pad controller on Tegra194 arm64: tegra: Enable XUSB host in P2972-0000 board .../phy/nvidia,tegra124-xusb-padctl.txt | 16 ++ .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++- .../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 ++++++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 139 +++++++++++++++++ drivers/phy/tegra/Makefile | 1 + drivers/phy/tegra/xusb-tegra186.c | 144 +++++++++++++----- drivers/phy/tegra/xusb.c | 7 + drivers/phy/tegra/xusb.h | 6 + drivers/usb/host/xhci-tegra.c | 88 +++++++++-- 9 files changed, 448 insertions(+), 51 deletions(-)