diff mbox series

[v3,1/2] Serial: Ingenic: Add support for the X1000.

Message ID 1548695029-11900-2-git-send-email-zhouyanjie@zoho.com (mailing list archive)
State Mainlined
Commit 8a417cdeb0dc04035cb8a56c5e16c50df1bd88c3
Headers show
Series [v3,1/2] Serial: Ingenic: Add support for the X1000. | expand

Commit Message

Zhou Yanjie Jan. 28, 2019, 5:03 p.m. UTC 
Add support for probing the 8250_ingenic driver on the
X1000 Soc from Ingenic.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

Comments

Greg Kroah-Hartman Oct. 12, 2019, 7:35 a.m. UTC | #1 
On Sat, Oct 12, 2019 at 01:13:23PM +0800, Zhou Yanjie wrote:
> Add support for probing the 8250_ingenic driver on the
> X1000 Soc from Ingenic.
> 
> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
> ---
>  drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)

<snip>

you seem to have two patches merged into one here, please fix up and
resend.

thanks,

greg k-h
Zhou Yanjie Oct. 14, 2019, 3:28 a.m. UTC | #2 
Hi Greg,

I'm sorry, maybe it was a problem when I git send-email,
causing the wrong patch to be sent to you. Just ignore
the email about the serial patch please.

Best regards!

On 2019年10月12日 15:35, Greg KH wrote:
> On Sat, Oct 12, 2019 at 01:13:23PM +0800, Zhou Yanjie wrote:
>> Add support for probing the 8250_ingenic driver on the
>> X1000 Soc from Ingenic.
>>
>> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
>> ---
>>   drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++----
>>   1 file changed, 9 insertions(+), 4 deletions(-)
> <snip>
>
> you seem to have two patches merged into one here, please fix up and
> resend.
>
> thanks,
>
> greg k-h
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 15a8c8d..424c07c 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -129,22 +129,21 @@  static int __init ingenic_early_console_setup(struct earlycon_device *dev,
 	return 0;
 }
 
-EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
 		    ingenic_early_console_setup);
 
-EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
 		    ingenic_early_console_setup);
 
-EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
 		    ingenic_early_console_setup);
 
-EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
 		    ingenic_early_console_setup);
 
+OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
+		    ingenic_early_console_setup);
+
 static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 {
 	int ier;
@@ -328,12 +327,18 @@  static const struct ingenic_uart_config jz4780_uart_config = {
 	.fifosize = 64,
 };
 
+static const struct ingenic_uart_config x1000_uart_config = {
+	.tx_loadsz = 32,
+	.fifosize = 64,
+};
+
 static const struct of_device_id of_match[] = {
 	{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
 	{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
+	{ .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_match);