[GIT,PULL,1/3] bcm2835-dt-next-2019-10-15

Pull-request

git://github.com/anholt/linux tags/bcm2835-dt-next-2019-10-15

Message

Stefan Wahren Oct. 15, 2019, 5:15 p.m. UTC

Hi Florian,

The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:

  Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)

are available in the git repository at:

  git://github.com/anholt/linux tags/bcm2835-dt-next-2019-10-15

for you to fetch changes up to 46fdee06aeefedfc62a4c33b2c4a7a74682ac755:

  arm64: dts: broadcom: Add reference to RPi 4 B (2019-10-10 19:14:28 +0200)

----------------------------------------------------------------
This pull request introduce initial Raspberry Pi 4 support. But all the fancy
stuff like GENET, PCIe, xHCI, 40 bit DMA and V3D is missing.

----------------------------------------------------------------
Stefan Wahren (7):
      ARM: dts: bcm283x: Remove simple-bus from fixed clocks
      ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
      ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
      dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
      dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
      ARM: dts: Add minimal Raspberry Pi 4 support
      arm64: dts: broadcom: Add reference to RPi 4 B

 .../devicetree/bindings/arm/bcm/bcm2835.yaml       |  54 ++
 .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt   |  67 --
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts              | 123 +++
 arch/arm/boot/dts/bcm2711.dtsi                     | 844 +++++++++++++++++++++
 arch/arm/boot/dts/bcm2835-common.dtsi              | 194 +++++
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |   4 -
 arch/arm/boot/dts/bcm2835.dtsi                     |   1 +
 arch/arm/boot/dts/bcm2836.dtsi                     |   1 +
 arch/arm/boot/dts/bcm2837.dtsi                     |   1 +
 arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi  |   7 +
 arch/arm/boot/dts/bcm283x.dtsi                     | 190 +----
 arch/arm64/boot/dts/broadcom/Makefile              |   3 +-
 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts   |   2 +
 14 files changed, 1236 insertions(+), 256 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
 create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
 create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi
 create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts

Comments

Florian Fainelli Oct. 18, 2019, 5:20 p.m. UTC | #1

On 10/15/19 10:15 AM, Stefan Wahren wrote:
> Hi Florian,
> 
> The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:
> 
>   Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)
> 
> are available in the git repository at:
> 
>   git://github.com/anholt/linux tags/bcm2835-dt-next-2019-10-15
> 
> for you to fetch changes up to 46fdee06aeefedfc62a4c33b2c4a7a74682ac755:
> 
>   arm64: dts: broadcom: Add reference to RPi 4 B (2019-10-10 19:14:28 +0200)
> 
> ----------------------------------------------------------------
> This pull request introduce initial Raspberry Pi 4 support. But all the fancy
> stuff like GENET, PCIe, xHCI, 40 bit DMA and V3D is missing.
> 
> ----------------------------------------------------------------
> Stefan Wahren (7):
>       ARM: dts: bcm283x: Remove simple-bus from fixed clocks
>       ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
>       ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
>       dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
>       dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
>       ARM: dts: Add minimal Raspberry Pi 4 support
>       arm64: dts: broadcom: Add reference to RPi 4 B

Merged into devicetree/next, thanks Stefan.