| Message ID | 20191016150622.21753-1-frieder.schrempf@kontron.de (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for more Kontron i.MX6UL/ULL SoMs and boards | expand |
Hi Frieder, On 19-10-16 15:06, Schrempf Frieder wrote: > From: Frieder Schrempf <frieder.schrempf@kontron.de> > > In order to support more of the i.MX6UL/ULL-based SoMs and boards by > Kontron Electronics GmbH, we restructure the devicetrees to share common > parts and add new devicetrees for the missing boards. > > Currently there are the following SoM flavors: > * N6310: SoM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND > * N6311: SoM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND (new) > * N6411: SoM with i.MX6ULL, 512MB RAM, 512MB SPI NAND (new) > > Each of the SoMs also features 1MB SPI NOR and an Ethernet PHY. The carrier > board for the evalkit is the same for all SoMs. > > Frieder Schrempf (10): > ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate > file > ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 > ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file > ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' > and 'N6411 S' > ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' > ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and > eMMC > ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent > polarity to usb nodes > ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix > indentation > dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles > MAINTAINERS: Add an entry for Kontron Electronics ARM board support Did you send all patches to same To: and Cc:? Regards, Marco > > .../devicetree/bindings/arm/fsl.yaml | 14 + > MAINTAINERS | 6 + > arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 405 +---------------- > .../boot/dts/imx6ul-kontron-n6310-som.dtsi | 95 +--- > arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts | 16 + > .../boot/dts/imx6ul-kontron-n6311-som.dtsi | 40 ++ > arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 422 ++++++++++++++++++ > .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 129 ++++++ > arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts | 16 + > .../boot/dts/imx6ull-kontron-n6411-som.dtsi | 40 ++ > 10 files changed, 685 insertions(+), 498 deletions(-) > create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts > create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi > create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi > create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi > create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts > create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi > > -- > 2.17.1 > >
Hi Marco, On 17.10.19 10:14, Marco Felsch wrote: > Hi Frieder, > > On 19-10-16 15:06, Schrempf Frieder wrote: >> From: Frieder Schrempf <frieder.schrempf@kontron.de> >> >> In order to support more of the i.MX6UL/ULL-based SoMs and boards by >> Kontron Electronics GmbH, we restructure the devicetrees to share common >> parts and add new devicetrees for the missing boards. >> >> Currently there are the following SoM flavors: >> * N6310: SoM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND >> * N6311: SoM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND (new) >> * N6411: SoM with i.MX6ULL, 512MB RAM, 512MB SPI NAND (new) >> >> Each of the SoMs also features 1MB SPI NOR and an Ethernet PHY. The carrier >> board for the evalkit is the same for all SoMs. >> >> Frieder Schrempf (10): >> ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate >> file >> ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 >> ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file >> ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' >> and 'N6411 S' >> ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' >> ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and >> eMMC >> ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent >> polarity to usb nodes >> ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix >> indentation >> dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles >> MAINTAINERS: Add an entry for Kontron Electronics ARM board support > > Did you send all patches to same To: and Cc:? No, I have a script that runs get_maintainer.pl for each patch. So the recipients might differ. I only had Krzysztof and Rob as hard-coded recipients for the whole series. Do you think I should change this so each recipient receives the whole series? Thanks, Frieder > > Regards, > Marco > >> >> .../devicetree/bindings/arm/fsl.yaml | 14 + >> MAINTAINERS | 6 + >> arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 405 +---------------- >> .../boot/dts/imx6ul-kontron-n6310-som.dtsi | 95 +--- >> arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts | 16 + >> .../boot/dts/imx6ul-kontron-n6311-som.dtsi | 40 ++ >> arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 422 ++++++++++++++++++ >> .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 129 ++++++ >> arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts | 16 + >> .../boot/dts/imx6ull-kontron-n6411-som.dtsi | 40 ++ >> 10 files changed, 685 insertions(+), 498 deletions(-) >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi >> create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts >> create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi >> >> -- >> 2.17.1 >> >> >
Hi Frieder, On 19-10-17 08:24, Schrempf Frieder wrote: > Hi Marco, > > On 17.10.19 10:14, Marco Felsch wrote: > > Hi Frieder, > > > > On 19-10-16 15:06, Schrempf Frieder wrote: > >> From: Frieder Schrempf <frieder.schrempf@kontron.de> > >> > >> In order to support more of the i.MX6UL/ULL-based SoMs and boards by > >> Kontron Electronics GmbH, we restructure the devicetrees to share common > >> parts and add new devicetrees for the missing boards. > >> > >> Currently there are the following SoM flavors: > >> * N6310: SoM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND > >> * N6311: SoM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND (new) > >> * N6411: SoM with i.MX6ULL, 512MB RAM, 512MB SPI NAND (new) > >> > >> Each of the SoMs also features 1MB SPI NOR and an Ethernet PHY. The carrier > >> board for the evalkit is the same for all SoMs. > >> > >> Frieder Schrempf (10): > >> ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate > >> file > >> ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 > >> ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file > >> ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' > >> and 'N6411 S' > >> ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' > >> ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and > >> eMMC > >> ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent > >> polarity to usb nodes > >> ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix > >> indentation > >> dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles > >> MAINTAINERS: Add an entry for Kontron Electronics ARM board support > > > > Did you send all patches to same To: and Cc:? > > No, I have a script that runs get_maintainer.pl for each patch. So the > recipients might differ. I only had Krzysztof and Rob as hard-coded > recipients for the whole series. > > Do you think I should change this so each recipient receives the whole > series? I do it that way because sometimes it is better for the reviewer to see the whole context. Regards, Marco > Thanks, > Frieder > > > > > Regards, > > Marco > > > >> > >> .../devicetree/bindings/arm/fsl.yaml | 14 + > >> MAINTAINERS | 6 + > >> arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 405 +---------------- > >> .../boot/dts/imx6ul-kontron-n6310-som.dtsi | 95 +--- > >> arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts | 16 + > >> .../boot/dts/imx6ul-kontron-n6311-som.dtsi | 40 ++ > >> arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 422 ++++++++++++++++++ > >> .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 129 ++++++ > >> arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts | 16 + > >> .../boot/dts/imx6ull-kontron-n6411-som.dtsi | 40 ++ > >> 10 files changed, 685 insertions(+), 498 deletions(-) > >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts > >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi > >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi > >> create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi > >> create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts > >> create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi > >> > >> -- > >> 2.17.1 > >> > >> > >
Hi Marco, On 21.10.19 13:43, Marco Felsch wrote: > Hi Frieder, > > On 19-10-17 08:24, Schrempf Frieder wrote: >> Hi Marco, >> >> On 17.10.19 10:14, Marco Felsch wrote: >>> Hi Frieder, >>> >>> On 19-10-16 15:06, Schrempf Frieder wrote: >>>> From: Frieder Schrempf <frieder.schrempf@kontron.de> >>>> >>>> In order to support more of the i.MX6UL/ULL-based SoMs and boards by >>>> Kontron Electronics GmbH, we restructure the devicetrees to share common >>>> parts and add new devicetrees for the missing boards. >>>> >>>> Currently there are the following SoM flavors: >>>> * N6310: SoM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND >>>> * N6311: SoM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND (new) >>>> * N6411: SoM with i.MX6ULL, 512MB RAM, 512MB SPI NAND (new) >>>> >>>> Each of the SoMs also features 1MB SPI NOR and an Ethernet PHY. The carrier >>>> board for the evalkit is the same for all SoMs. >>>> >>>> Frieder Schrempf (10): >>>> ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate >>>> file >>>> ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 >>>> ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file >>>> ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' >>>> and 'N6411 S' >>>> ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' >>>> ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and >>>> eMMC >>>> ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent >>>> polarity to usb nodes >>>> ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix >>>> indentation >>>> dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles >>>> MAINTAINERS: Add an entry for Kontron Electronics ARM board support >>> >>> Did you send all patches to same To: and Cc:? >> >> No, I have a script that runs get_maintainer.pl for each patch. So the >> recipients might differ. I only had Krzysztof and Rob as hard-coded >> recipients for the whole series. >> >> Do you think I should change this so each recipient receives the whole >> series? > > I do it that way because sometimes it is better for the reviewer to see > the whole context. Sounds reasonable. Thanks for the feedback. Sometimes it just feels like it will cause a lot of useless mail traffic when sending all patches to all people suggested by get_maintainer.pl, but in general I agree, it is definitely useful to receive all the context. I might have to tweak my get_maintainer arguments, to trim the list of recipients and then send the whole series to these people. Thanks, Frieder
From: Frieder Schrempf <frieder.schrempf@kontron.de> In order to support more of the i.MX6UL/ULL-based SoMs and boards by Kontron Electronics GmbH, we restructure the devicetrees to share common parts and add new devicetrees for the missing boards. Currently there are the following SoM flavors: * N6310: SoM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SoM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND (new) * N6411: SoM with i.MX6ULL, 512MB RAM, 512MB SPI NAND (new) Each of the SoMs also features 1MB SPI NOR and an Ethernet PHY. The carrier board for the evalkit is the same for all SoMs. Frieder Schrempf (10): ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S' ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and eMMC ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles MAINTAINERS: Add an entry for Kontron Electronics ARM board support .../devicetree/bindings/arm/fsl.yaml | 14 + MAINTAINERS | 6 + arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 405 +---------------- .../boot/dts/imx6ul-kontron-n6310-som.dtsi | 95 +--- arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts | 16 + .../boot/dts/imx6ul-kontron-n6311-som.dtsi | 40 ++ arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 422 ++++++++++++++++++ .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 129 ++++++ arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts | 16 + .../boot/dts/imx6ull-kontron-n6411-som.dtsi | 40 ++ 10 files changed, 685 insertions(+), 498 deletions(-) create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi