diff mbox series

clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM

Message ID f5d2b9c53f1ed5ccb1dd3c6624f56759d92e1689.1571771777.git.leonard.crestez@nxp.com (mailing list archive)
State Accepted
Headers show
Series clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM | expand

Commit Message

Leonard Crestez Oct. 22, 2019, 7:21 p.m. UTC 
During cpu frequency switching the main "CLK_ARM" is reparented to an
intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is
used for this purpose but it is extremely slow, increasing wakeup
latencies to the point that i2c transactions can timeout and system
becomes unresponsive.

Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior
of imx8m cpufreq drivers in imx vendor tree.

This bug was not immediately apparent because upstream arm64 defconfig
uses the "performance" governor by default so no cpufreq transitions
happen.

Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")

Cc: stable@vger.kernel.org
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/clk/imx/clk-imx8mm.c | 2 +-
 drivers/clk/imx/clk-imx8mn.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

This is marked as "cc: stable" because it has a large impact on common
usecases and it's difficult to debug.

This was sent with a different email workaround so hope it arrives OK.

Comments

Shawn Guo Oct. 28, 2019, 8:35 a.m. UTC | #1 
On Tue, Oct 22, 2019 at 10:21:28PM +0300, Leonard Crestez wrote:
> During cpu frequency switching the main "CLK_ARM" is reparented to an
> intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is
> used for this purpose but it is extremely slow, increasing wakeup
> latencies to the point that i2c transactions can timeout and system
> becomes unresponsive.
> 
> Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior
> of imx8m cpufreq drivers in imx vendor tree.
> 
> This bug was not immediately apparent because upstream arm64 defconfig
> uses the "performance" governor by default so no cpufreq transitions
> happen.
> 
> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
> Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

Acked-by: Shawn Guo <shawnguo@kernel.org>

Stephen,

I assume that you will pick up this one as a fix.

Shawn
Stephen Boyd Oct. 28, 2019, 9:45 a.m. UTC | #2 
Quoting Leonard Crestez (2019-10-22 12:21:28)
> During cpu frequency switching the main "CLK_ARM" is reparented to an
> intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is
> used for this purpose but it is extremely slow, increasing wakeup
> latencies to the point that i2c transactions can timeout and system
> becomes unresponsive.
> 
> Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior
> of imx8m cpufreq drivers in imx vendor tree.
> 
> This bug was not immediately apparent because upstream arm64 defconfig
> uses the "performance" governor by default so no cpufreq transitions
> happen.
> 
> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
> Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---

Applied to clk-fixes
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index bbd212eb904e..a92942ea2045 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -588,11 +588,11 @@  static int imx8mm_clocks_probe(struct platform_device *pdev)
 
 	clks[IMX8MM_CLK_ARM] = imx_clk_cpu("arm", "arm_a53_div",
 					   clks[IMX8MM_CLK_A53_DIV],
 					   clks[IMX8MM_CLK_A53_SRC],
 					   clks[IMX8MM_ARM_PLL_OUT],
-					   clks[IMX8MM_CLK_24M]);
+					   clks[IMX8MM_SYS_PLL1_800M]);
 
 	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index ad7f2e527c70..3cd38eba58df 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -544,11 +544,11 @@  static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	clks[IMX8MN_CLK_ARM] = imx_clk_cpu("arm", "arm_a53_div",
 					   clks[IMX8MN_CLK_A53_DIV],
 					   clks[IMX8MN_CLK_A53_SRC],
 					   clks[IMX8MN_ARM_PLL_OUT],
-					   clks[IMX8MN_CLK_24M]);
+					   clks[IMX8MN_SYS_PLL1_800M]);
 
 	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);