| Message ID | 20191101092031.24896-1-codrin.ciubotariu@microchip.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 0b3292852863215825f88905b9dbafc3101e1d7e |
| Headers | show |
| Series | [v2] pinctrl: at91: Enable slewrate by default on SAM9X60 | expand |
On Fri, Nov 01, 2019 at 11:20:31AM +0200, Codrin Ciubotariu wrote: > On SAM9X60, slewrate should be enabled on pins with a switching frequency > below 50Mhz. Since most of our pins do not exceed this value, we enable > slewrate by default. Pins with a switching value that exceeds 50Mhz will > have to explicitly disable slewrate. > > This patch changes the ABI. However, the slewrate macros are only used > by SAM9X60 and, at this moment, there are no device-tree files available > for this platform. > > Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> > Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Thanks > --- > > Changes in v2: > - updated commit message to reflect the ABI change > > drivers/pinctrl/pinctrl-at91.c | 4 ++-- > include/dt-bindings/pinctrl/at91.h | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c > index 117075b5798f..c135149e84e9 100644 > --- a/drivers/pinctrl/pinctrl-at91.c > +++ b/drivers/pinctrl/pinctrl-at91.c > @@ -85,8 +85,8 @@ enum drive_strength_bit { > DRIVE_STRENGTH_SHIFT) > > enum slewrate_bit { > - SLEWRATE_BIT_DIS, > SLEWRATE_BIT_ENA, > + SLEWRATE_BIT_DIS, > }; > > #define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT) > @@ -669,7 +669,7 @@ static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin, > { > unsigned int tmp; > > - if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA) > + if (setting < SLEWRATE_BIT_ENA || setting > SLEWRATE_BIT_DIS) > return; > > tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR); > diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h > index 3831f91fb3ba..e8e117306b1b 100644 > --- a/include/dt-bindings/pinctrl/at91.h > +++ b/include/dt-bindings/pinctrl/at91.h > @@ -27,8 +27,8 @@ > #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) > #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) > > -#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) > -#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) > +#define AT91_PINCTRL_SLEWRATE_ENA (0x0 << 9) > +#define AT91_PINCTRL_SLEWRATE_DIS (0x1 << 9) > > #define AT91_PIOA 0 > #define AT91_PIOB 1 > -- > 2.20.1 >
On 01.11.2019 16:26, Ludovic Desroches - M43218 wrote: > On Fri, Nov 01, 2019 at 11:20:31AM +0200, Codrin Ciubotariu wrote: >> On SAM9X60, slewrate should be enabled on pins with a switching frequency >> below 50Mhz. Since most of our pins do not exceed this value, we enable >> slewrate by default. Pins with a switching value that exceeds 50Mhz will >> have to explicitly disable slewrate. >> >> This patch changes the ABI. However, the slewrate macros are only used >> by SAM9X60 and, at this moment, there are no device-tree files available >> for this platform. >> >> Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> >> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> > Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> > > Thanks > >> --- >> >> Changes in v2: >> - updated commit message to reflect the ABI change >> >> drivers/pinctrl/pinctrl-at91.c | 4 ++-- >> include/dt-bindings/pinctrl/at91.h | 4 ++-- >> 2 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c >> index 117075b5798f..c135149e84e9 100644 >> --- a/drivers/pinctrl/pinctrl-at91.c >> +++ b/drivers/pinctrl/pinctrl-at91.c >> @@ -85,8 +85,8 @@ enum drive_strength_bit { >> DRIVE_STRENGTH_SHIFT) >> >> enum slewrate_bit { >> - SLEWRATE_BIT_DIS, >> SLEWRATE_BIT_ENA, >> + SLEWRATE_BIT_DIS, >> }; >> >> #define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT) >> @@ -669,7 +669,7 @@ static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin, >> { >> unsigned int tmp; >> >> - if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA) >> + if (setting < SLEWRATE_BIT_ENA || setting > SLEWRATE_BIT_DIS) >> return; >> >> tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR); >> diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h >> index 3831f91fb3ba..e8e117306b1b 100644 >> --- a/include/dt-bindings/pinctrl/at91.h >> +++ b/include/dt-bindings/pinctrl/at91.h >> @@ -27,8 +27,8 @@ >> #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) >> #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) >> >> -#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) >> -#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) >> +#define AT91_PINCTRL_SLEWRATE_ENA (0x0 << 9) >> +#define AT91_PINCTRL_SLEWRATE_DIS (0x1 << 9) >> >> #define AT91_PIOA 0 >> #define AT91_PIOB 1 >> -- >> 2.20.1 >> >
On Fri, Nov 1, 2019 at 10:20 AM Codrin Ciubotariu <codrin.ciubotariu@microchip.com> wrote: > On SAM9X60, slewrate should be enabled on pins with a switching frequency > below 50Mhz. Since most of our pins do not exceed this value, we enable > slewrate by default. Pins with a switching value that exceeds 50Mhz will > have to explicitly disable slewrate. > > This patch changes the ABI. However, the slewrate macros are only used > by SAM9X60 and, at this moment, there are no device-tree files available > for this platform. > > Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> > Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> > --- > > Changes in v2: > - updated commit message to reflect the ABI change Patch applied with the ACKs. Yours, Linus Walleij
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 117075b5798f..c135149e84e9 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -85,8 +85,8 @@ enum drive_strength_bit { DRIVE_STRENGTH_SHIFT) enum slewrate_bit { - SLEWRATE_BIT_DIS, SLEWRATE_BIT_ENA, + SLEWRATE_BIT_DIS, }; #define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT) @@ -669,7 +669,7 @@ static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin, { unsigned int tmp; - if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA) + if (setting < SLEWRATE_BIT_ENA || setting > SLEWRATE_BIT_DIS) return; tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR); diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index 3831f91fb3ba..e8e117306b1b 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -27,8 +27,8 @@ #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) -#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) -#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) +#define AT91_PINCTRL_SLEWRATE_ENA (0x0 << 9) +#define AT91_PINCTRL_SLEWRATE_DIS (0x1 << 9) #define AT91_PIOA 0 #define AT91_PIOB 1
On SAM9X60, slewrate should be enabled on pins with a switching frequency below 50Mhz. Since most of our pins do not exceed this value, we enable slewrate by default. Pins with a switching value that exceeds 50Mhz will have to explicitly disable slewrate. This patch changes the ABI. However, the slewrate macros are only used by SAM9X60 and, at this moment, there are no device-tree files available for this platform. Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> --- Changes in v2: - updated commit message to reflect the ABI change drivers/pinctrl/pinctrl-at91.c | 4 ++-- include/dt-bindings/pinctrl/at91.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)