diff mbox series

[net,v2,3/4] net: sgi: ioc3-eth: simplify setting the DMA mask

Message ID 20191103103433.26826-3-tbogendoerfer@suse.de (mailing list archive)
State Superseded
Headers show
Series [net,v2,1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls | expand

Commit Message

Thomas Bogendoerfer Nov. 3, 2019, 10:34 a.m. UTC 
From: Christoph Hellwig <hch@lst.de>

There is no need to fall back to a lower mask these days, the DMA mask
just communictes the hardware supported features.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/net/ethernet/sgi/ioc3-eth.c | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

Comments

Sergei Shtylyov Nov. 3, 2019, 6:41 p.m. UTC | #1 
Hello!

On 11/03/2019 01:34 PM, Thomas Bogendoerfer wrote:

> From: Christoph Hellwig <hch@lst.de>
> 
> There is no need to fall back to a lower mask these days, the DMA mask
> just communictes the hardware supported features.

   Communicates. :-)

> Signed-off-by: Christoph Hellwig <hch@lst.de>
[...]

MBR, Sergei
diff mbox series

Patch

diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index d1546f04d1fd..83abc8a13508 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1174,26 +1174,14 @@  static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ioc3 *ioc3;
 	unsigned long ioc3_base, ioc3_size;
 	u32 vendor, model, rev;
-	int err, pci_using_dac;
+	int err;
 
 	/* Configure DMA attributes. */
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (!err) {
-		pci_using_dac = 1;
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-		if (err < 0) {
-			pr_err("%s: Unable to obtain 64 bit DMA for consistent allocations\n",
-			       pci_name(pdev));
-			goto out;
-		}
-	} else {
-		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (err) {
-			pr_err("%s: No usable DMA configuration, aborting.\n",
-			       pci_name(pdev));
-			goto out;
-		}
-		pci_using_dac = 0;
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (err) {
+		pr_err("%s: No usable DMA configuration, aborting.\n",
+		       pci_name(pdev));
+		goto out;
 	}
 
 	if (pci_enable_device(pdev))
@@ -1205,8 +1193,7 @@  static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_disable;
 	}
 
-	if (pci_using_dac)
-		dev->features |= NETIF_F_HIGHDMA;
+	dev->features |= NETIF_F_HIGHDMA;
 
 	err = pci_request_regions(pdev, "ioc3");
 	if (err)