diff mbox series

[v1,7/7] dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts

Message ID 20191104163834.8932-8-andrew.murray@arm.com (mailing list archive)
State New, archived
Headers show
Series PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts | expand

Commit Message

Andrew Murray Nov. 4, 2019, 4:38 p.m. UTC 
Replace magic numbers used to describe legacy PCI IRQ interrupts
with #define.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
---
 .../devicetree/bindings/pci/83xx-512x-pci.txt | 18 ++---
 .../devicetree/bindings/pci/aardvark-pci.txt  | 10 +--
 .../devicetree/bindings/pci/altera-pcie.txt   | 10 +--
 .../bindings/pci/axis,artpec6-pcie.txt        | 10 +--
 .../bindings/pci/cdns,cdns-pcie-host.txt      | 10 +--
 .../bindings/pci/faraday,ftpci100.txt         | 68 +++++++++----------
 .../bindings/pci/fsl,imx6q-pcie.txt           | 10 +--
 .../bindings/pci/hisilicon-pcie.txt           | 20 +++---
 .../bindings/pci/host-generic-pci.txt         | 10 +--
 .../devicetree/bindings/pci/kirin-pcie.txt    | 10 +--
 .../bindings/pci/layerscape-pci.txt           | 10 +--
 .../devicetree/bindings/pci/mediatek-pcie.txt | 40 +++++------
 .../devicetree/bindings/pci/mobiveil-pcie.txt |  8 +--
 .../devicetree/bindings/pci/pci-rcar-gen2.txt |  8 +--
 .../bindings/pci/pci-thunder-pem.txt          | 10 +--
 .../devicetree/bindings/pci/pcie-al.txt       |  4 +-
 .../devicetree/bindings/pci/qcom,pcie.txt     | 20 +++---
 .../bindings/pci/ralink,rt3883-pci.txt        | 18 ++---
 .../bindings/pci/rockchip-pcie-host.txt       | 10 +--
 .../devicetree/bindings/pci/ti-pci.txt        | 10 +--
 .../devicetree/bindings/pci/uniphier-pcie.txt | 10 +--
 .../bindings/pci/v3-v360epc-pci.txt           | 34 +++++-----
 .../devicetree/bindings/pci/versatile.txt     | 40 +++++------
 .../devicetree/bindings/pci/xgene-pci-msi.txt | 10 +--
 .../devicetree/bindings/pci/xgene-pci.txt     | 10 +--
 .../bindings/pci/xilinx-nwl-pcie.txt          | 10 +--
 .../devicetree/bindings/pci/xilinx-pcie.txt   | 20 +++---
 27 files changed, 224 insertions(+), 224 deletions(-)

Comments

Linus Walleij Nov. 5, 2019, 3:08 p.m. UTC | #1 
Hi Andrew,

thanks for your patch!

On Mon, Nov 4, 2019 at 5:39 PM Andrew Murray <andrew.murray@arm.com> wrote:

> Replace magic numbers used to describe legacy PCI IRQ interrupts
> with #define.
>
> Signed-off-by: Andrew Murray <andrew.murray@arm.com>

When I add examples I usually make sure that above the examples
are the appropriate #include files, this is becoming more important
as we convert to yaml, then you need the right includes because the
examples will get compiled.

With that taken into account:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Andrew Murray Nov. 5, 2019, 3:16 p.m. UTC | #2 
On Tue, Nov 05, 2019 at 04:08:29PM +0100, Linus Walleij wrote:
> Hi Andrew,
> 
> thanks for your patch!

Thanks for the review.

> 
> On Mon, Nov 4, 2019 at 5:39 PM Andrew Murray <andrew.murray@arm.com> wrote:
> 
> > Replace magic numbers used to describe legacy PCI IRQ interrupts
> > with #define.
> >
> > Signed-off-by: Andrew Murray <andrew.murray@arm.com>
> 
> When I add examples I usually make sure that above the examples
> are the appropriate #include files, this is becoming more important
> as we convert to yaml, then you need the right includes because the
> examples will get compiled.

OK thanks - I can see other files in Documentation that take this approach
I'll update this patch on my respin.

Thanks,

Andrew Murray

> 
> With that taken into account:
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Yours,
> Linus Walleij
Rob Herring Nov. 6, 2019, 11:47 p.m. UTC | #3 
On Tue, Nov 05, 2019 at 03:16:23PM +0000, Andrew Murray wrote:
> On Tue, Nov 05, 2019 at 04:08:29PM +0100, Linus Walleij wrote:
> > Hi Andrew,
> > 
> > thanks for your patch!
> 
> Thanks for the review.
> 
> > 
> > On Mon, Nov 4, 2019 at 5:39 PM Andrew Murray <andrew.murray@arm.com> wrote:
> > 
> > > Replace magic numbers used to describe legacy PCI IRQ interrupts
> > > with #define.
> > >
> > > Signed-off-by: Andrew Murray <andrew.murray@arm.com>
> > 
> > When I add examples I usually make sure that above the examples
> > are the appropriate #include files, this is becoming more important
> > as we convert to yaml, then you need the right includes because the
> > examples will get compiled.
> 
> OK thanks - I can see other files in Documentation that take this approach
> I'll update this patch on my respin.

FYI, It's been on my todo to add common includes like irq.h and gpio.h 
to the example template used to compile the examples, so everyone 
doesn't have to add them.

Rob
Rob Herring Nov. 6, 2019, 11:47 p.m. UTC | #4 
On Mon,  4 Nov 2019 16:38:21 +0000, Andrew Murray wrote:
> Replace magic numbers used to describe legacy PCI IRQ interrupts
> with #define.
> 
> Signed-off-by: Andrew Murray <andrew.murray@arm.com>
> ---
>  .../devicetree/bindings/pci/83xx-512x-pci.txt | 18 ++---
>  .../devicetree/bindings/pci/aardvark-pci.txt  | 10 +--
>  .../devicetree/bindings/pci/altera-pcie.txt   | 10 +--
>  .../bindings/pci/axis,artpec6-pcie.txt        | 10 +--
>  .../bindings/pci/cdns,cdns-pcie-host.txt      | 10 +--
>  .../bindings/pci/faraday,ftpci100.txt         | 68 +++++++++----------
>  .../bindings/pci/fsl,imx6q-pcie.txt           | 10 +--
>  .../bindings/pci/hisilicon-pcie.txt           | 20 +++---
>  .../bindings/pci/host-generic-pci.txt         | 10 +--
>  .../devicetree/bindings/pci/kirin-pcie.txt    | 10 +--
>  .../bindings/pci/layerscape-pci.txt           | 10 +--
>  .../devicetree/bindings/pci/mediatek-pcie.txt | 40 +++++------
>  .../devicetree/bindings/pci/mobiveil-pcie.txt |  8 +--
>  .../devicetree/bindings/pci/pci-rcar-gen2.txt |  8 +--
>  .../bindings/pci/pci-thunder-pem.txt          | 10 +--
>  .../devicetree/bindings/pci/pcie-al.txt       |  4 +-
>  .../devicetree/bindings/pci/qcom,pcie.txt     | 20 +++---
>  .../bindings/pci/ralink,rt3883-pci.txt        | 18 ++---
>  .../bindings/pci/rockchip-pcie-host.txt       | 10 +--
>  .../devicetree/bindings/pci/ti-pci.txt        | 10 +--
>  .../devicetree/bindings/pci/uniphier-pcie.txt | 10 +--
>  .../bindings/pci/v3-v360epc-pci.txt           | 34 +++++-----
>  .../devicetree/bindings/pci/versatile.txt     | 40 +++++------
>  .../devicetree/bindings/pci/xgene-pci-msi.txt | 10 +--
>  .../devicetree/bindings/pci/xgene-pci.txt     | 10 +--
>  .../bindings/pci/xilinx-nwl-pcie.txt          | 10 +--
>  .../devicetree/bindings/pci/xilinx-pcie.txt   | 20 +++---
>  27 files changed, 224 insertions(+), 224 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
index 3abeecf4983f..cb80b9e49a2b 100644
--- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
+++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
@@ -9,19 +9,19 @@  Freescale 83xx and 512x SOCs include the same PCI bridge core.
 
 Example (MPC8313ERDB)
 	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 IRQ_INT_ALL>;
 		interrupt-map = <
 				/* IDSEL 0x0E -mini PCI */
-				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+				 0x7000 0x0 0x0 IRQ_INTA &ipic 18 0x8
+				 0x7000 0x0 0x0 IRQ_INTB &ipic 18 0x8
+				 0x7000 0x0 0x0 IRQ_INTC &ipic 18 0x8
+				 0x7000 0x0 0x0 IRQ_INTD &ipic 18 0x8
 
 				/* IDSEL 0x0F - PCI slot */
-				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+				 0x7800 0x0 0x0 IRQ_INTA &ipic 17 0x8
+				 0x7800 0x0 0x0 IRQ_INTB &ipic 18 0x8
+				 0x7800 0x0 0x0 IRQ_INTC &ipic 17 0x8
+				 0x7800 0x0 0x0 IRQ_INTD &ipic 18 0x8>;
 		interrupt-parent = <&ipic>;
 		interrupts = <66 0x8>;
 		bus-range = <0x0 0x0>;
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
index 310ef7145c47..ca8fe542edc9 100644
--- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -43,11 +43,11 @@  Example:
 		msi-parent = <&pcie0>;
 		ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
 			  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 0>,
-				<0 0 0 2 &pcie_intc 1>,
-				<0 0 0 3 &pcie_intc 2>,
-				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 0>,
+				<0 0 0 IRQ_INTB &pcie_intc 1>,
+				<0 0 0 IRQ_INTC &pcie_intc 2>,
+				<0 0 0 IRQ_INTD &pcie_intc 3>;
 		pcie_intc: interrupt-controller {
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index 816b244a221e..f9902dca1a03 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -40,11 +40,11 @@  Example
 		msi-parent = <&msi_to_gic_gen_0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_0 1>,
-			            <0 0 0 2 &pcie_0 2>,
-			            <0 0 0 3 &pcie_0 3>,
-			            <0 0 0 4 &pcie_0 4>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &pcie_0 1>,
+			            <0 0 0 IRQ_INTB &pcie_0 2>,
+			            <0 0 0 IRQ_INTC &pcie_0 3>,
+			            <0 0 0 IRQ_INTD &pcie_0 4>;
 		ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
 			  0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
 	};
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 979dc7b6cfe8..c71dbe94f0eb 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -41,10 +41,10 @@  Example:
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 IRQ_INTB &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 IRQ_INTC &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 IRQ_INTD &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 		axis,syscon-pcie = <&syscon>;
 	};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
index 91de69c713a9..67845103c8f0 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
@@ -52,12 +52,12 @@  pcie@fb000000 {
 
 	#interrupt-cells = <0x1>;
 
-	interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1
-			 0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1
-			 0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1
-			 0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
+	interrupt-map = <0x0 0x0 0x0  IRQ_INTA  &gic  0x0 0x0 0x0 14 0x1
+			 0x0 0x0 0x0  IRQ_INTB  &gic  0x0 0x0 0x0 15 0x1
+			 0x0 0x0 0x0  IRQ_INTC  &gic  0x0 0x0 0x0 16 0x1
+			 0x0 0x0 0x0  IRQ_INTD  &gic  0x0 0x0 0x0 17 0x1>;
 
-	interrupt-map-mask = <0x0 0x0 0x0  0x7>;
+	interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
 
 	msi-parent = <&its_pci>;
 
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
index 5f8cb4962f8d..b267d4853773 100644
--- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
@@ -61,24 +61,24 @@  variant) interrupts assigns the default interrupt mapping/swizzling has
 typically been like this, doing the swizzling on the interrupt controller side
 rather than in the interconnect:
 
-interrupt-map-mask = <0xf800 0 0 7>;
+interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
 interrupt-map =
-	<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-	<0x4800 0 0 2 &pci_intc 1>,
-	<0x4800 0 0 3 &pci_intc 2>,
-	<0x4800 0 0 4 &pci_intc 3>,
-	<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-	<0x5000 0 0 2 &pci_intc 2>,
-	<0x5000 0 0 3 &pci_intc 3>,
-	<0x5000 0 0 4 &pci_intc 0>,
-	<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-	<0x5800 0 0 2 &pci_intc 3>,
-	<0x5800 0 0 3 &pci_intc 0>,
-	<0x5800 0 0 4 &pci_intc 1>,
-	<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-	<0x6000 0 0 2 &pci_intc 0>,
-	<0x6000 0 0 3 &pci_intc 1>,
-	<0x6000 0 0 4 &pci_intc 2>;
+	<0x4800 0 0 IRQ_INTA &pci_intc 0>, /* Slot 9 */
+	<0x4800 0 0 IRQ_INTB &pci_intc 1>,
+	<0x4800 0 0 IRQ_INTC &pci_intc 2>,
+	<0x4800 0 0 IRQ_INTD &pci_intc 3>,
+	<0x5000 0 0 IRQ_INTA &pci_intc 1>, /* Slot 10 */
+	<0x5000 0 0 IRQ_INTB &pci_intc 2>,
+	<0x5000 0 0 IRQ_INTC &pci_intc 3>,
+	<0x5000 0 0 IRQ_INTD &pci_intc 0>,
+	<0x5800 0 0 IRQ_INTA &pci_intc 2>, /* Slot 11 */
+	<0x5800 0 0 IRQ_INTB &pci_intc 3>,
+	<0x5800 0 0 IRQ_INTC &pci_intc 0>,
+	<0x5800 0 0 IRQ_INTD &pci_intc 1>,
+	<0x6000 0 0 IRQ_INTA &pci_intc 3>, /* Slot 12 */
+	<0x6000 0 0 IRQ_INTB &pci_intc 0>,
+	<0x6000 0 0 IRQ_INTC &pci_intc 1>,
+	<0x6000 0 0 IRQ_INTD &pci_intc 2>;
 
 Example:
 
@@ -108,24 +108,24 @@  pci@50000000 {
 	/* 64MiB at 0x00000000-0x03ffffff */
 	<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
 
-	interrupt-map-mask = <0xf800 0 0 7>;
+	interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
 	interrupt-map =
-		<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-		<0x4800 0 0 2 &pci_intc 1>,
-		<0x4800 0 0 3 &pci_intc 2>,
-		<0x4800 0 0 4 &pci_intc 3>,
-		<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-		<0x5000 0 0 2 &pci_intc 2>,
-		<0x5000 0 0 3 &pci_intc 3>,
-		<0x5000 0 0 4 &pci_intc 0>,
-		<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-		<0x5800 0 0 2 &pci_intc 3>,
-		<0x5800 0 0 3 &pci_intc 0>,
-		<0x5800 0 0 4 &pci_intc 1>,
-		<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-		<0x6000 0 0 2 &pci_intc 0>,
-		<0x6000 0 0 3 &pci_intc 0>,
-		<0x6000 0 0 4 &pci_intc 0>;
+		<0x4800 0 0 IRQ_INTA &pci_intc 0>, /* Slot 9 */
+		<0x4800 0 0 IRQ_INTB &pci_intc 1>,
+		<0x4800 0 0 IRQ_INTC &pci_intc 2>,
+		<0x4800 0 0 IRQ_INTD &pci_intc 3>,
+		<0x5000 0 0 IRQ_INTA &pci_intc 1>, /* Slot 10 */
+		<0x5000 0 0 IRQ_INTB &pci_intc 2>,
+		<0x5000 0 0 IRQ_INTC &pci_intc 3>,
+		<0x5000 0 0 IRQ_INTD &pci_intc 0>,
+		<0x5800 0 0 IRQ_INTA &pci_intc 2>, /* Slot 11 */
+		<0x5800 0 0 IRQ_INTB &pci_intc 3>,
+		<0x5800 0 0 IRQ_INTC &pci_intc 0>,
+		<0x5800 0 0 IRQ_INTD &pci_intc 1>,
+		<0x6000 0 0 IRQ_INTA &pci_intc 3>, /* Slot 12 */
+		<0x6000 0 0 IRQ_INTB &pci_intc 0>,
+		<0x6000 0 0 IRQ_INTC &pci_intc 0>,
+		<0x6000 0 0 IRQ_INTD &pci_intc 0>;
 	pci_intc: interrupt-controller {
 		interrupt-parent = <&intcon>;
 		interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index de4b2baf91e8..dc331885124a 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -77,11 +77,11 @@  Example:
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 IRQ_INTB &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 IRQ_INTC &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 IRQ_INTD &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clks 144>, <&clks 206>, <&clks 189>;
 		clock-names = "pcie", "pcie_bus", "pcie_phy";
 	};
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 0dcb87d6554f..3e809c7d9b07 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -35,11 +35,11 @@  Hip05 Example (note that Hip06 is the same except compatible):
 		num-lanes = <8>;
 		port-id = <1>;
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10
-				 0x0 0 0 2 &mbigen_pcie 2 11
-				 0x0 0 0 3 &mbigen_pcie 3 12
-				 0x0 0 0 4 &mbigen_pcie 4 13>;
+		interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0x0 0 0 IRQ_INTA &mbigen_pcie 1 10
+				 0x0 0 0 IRQ_INTB &mbigen_pcie 2 11
+				 0x0 0 0 IRQ_INTC &mbigen_pcie 3 12
+				 0x0 0 0 IRQ_INTD &mbigen_pcie 4 13>;
 	};
 
 HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
@@ -77,9 +77,9 @@  Example:
 		ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
 			  0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
-				 0x0 0 0 2 &mbigen_pcie0 650 4
-				 0x0 0 0 3 &mbigen_pcie0 650 4
-				 0x0 0 0 4 &mbigen_pcie0 650 4>;
+		interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0x0 0 0 IRQ_INTA &mbigen_pcie0 650 4
+				 0x0 0 0 IRQ_INTB &mbigen_pcie0 650 4
+				 0x0 0 0 IRQ_INTC &mbigen_pcie0 650 4
+				 0x0 0 0 IRQ_INTD &mbigen_pcie0 650 4>;
 	};
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
index 614b594f4e72..51a56ad3f1a9 100644
--- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
@@ -91,11 +91,11 @@  pci {
     #interrupt-cells = <0x1>;
 
     // PCI_DEVICE(3)  INT#(1)  CONTROLLER(PHANDLE)  CONTROLLER_DATA(3)
-    interrupt-map = <  0x0 0x0 0x0  0x1  &gic  0x0 0x4 0x1
-                     0x800 0x0 0x0  0x1  &gic  0x0 0x5 0x1
-                    0x1000 0x0 0x0  0x1  &gic  0x0 0x6 0x1
-                    0x1800 0x0 0x0  0x1  &gic  0x0 0x7 0x1>;
+    interrupt-map = <  0x0 0x0 0x0 IRQ_INTA  &gic  0x0 0x4 0x1
+                     0x800 0x0 0x0 IRQ_INTA  &gic  0x0 0x5 0x1
+                    0x1000 0x0 0x0 IRQ_INTA  &gic  0x0 0x6 0x1
+                    0x1800 0x0 0x0 IRQ_INTA  &gic  0x0 0x7 0x1>;
 
     // PCI_DEVICE(3)  INT#(1)
-    interrupt-map-mask = <0xf800 0x0 0x0  0x7>;
+    interrupt-map-mask = <0xf800 0x0 0x0 IRQ_MAP_ALL>;
 }
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index 6bbe43818ad5..7da640d6578e 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -34,11 +34,11 @@  Example based on kirin960:
 		ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
 		num-lanes = <1>;
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &gic 0 0 0  282 4>,
-				<0x0 0 0 2 &gic 0 0 0  283 4>,
-				<0x0 0 0 3 &gic 0 0 0  284 4>,
-				<0x0 0 0 4 &gic 0 0 0  285 4>;
+		interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0x0 0 0 IRQ_INTA &gic 0 0 0  282 4>,
+				<0x0 0 0 IRQ_INTB &gic 0 0 0  283 4>,
+				<0x0 0 0 IRQ_INTC &gic 0 0 0  284 4>,
+				<0x0 0 0 IRQ_INTD &gic 0 0 0  285 4>;
 		clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
 			 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
 			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index e20ceaab9b38..1016e9f8982a 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -56,9 +56,9 @@  Example:
 			  0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000   /* prefetchable memory */
 			  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0000 0 0 IRQ_INTA &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 IRQ_INTB &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 IRQ_INTC &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 IRQ_INTD &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 	};
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 7468d666763a..00728cdad957 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -169,11 +169,11 @@  Examples for MT2712:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
+			interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+			interrupt-map = <0 0 0 IRQ_INTA &pcie_intc0 0>,
+					<0 0 0 IRQ_INTB &pcie_intc0 1>,
+					<0 0 0 IRQ_INTC &pcie_intc0 2>,
+					<0 0 0 IRQ_INTD &pcie_intc0 3>;
 			pcie_intc0: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
@@ -187,11 +187,11 @@  Examples for MT2712:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
+			interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+			interrupt-map = <0 0 0 IRQ_INTA &pcie_intc1 0>,
+					<0 0 0 IRQ_INTB &pcie_intc1 1>,
+					<0 0 0 IRQ_INTC &pcie_intc1 2>,
+					<0 0 0 IRQ_INTD &pcie_intc1 3>;
 			pcie_intc1: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
@@ -240,11 +240,11 @@  Examples for MT7622:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
+			interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+			interrupt-map = <0 0 0 IRQ_INTA &pcie_intc0 0>,
+					<0 0 0 IRQ_INTB &pcie_intc0 1>,
+					<0 0 0 IRQ_INTC &pcie_intc0 2>,
+					<0 0 0 IRQ_INTD &pcie_intc0 3>;
 			pcie_intc0: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
@@ -258,11 +258,11 @@  Examples for MT7622:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
+			interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+			interrupt-map = <0 0 0 IRQ_INTA &pcie_intc1 0>,
+					<0 0 0 IRQ_INTB &pcie_intc1 1>,
+					<0 0 0 IRQ_INTC &pcie_intc1 2>,
+					<0 0 0 IRQ_INTD &pcie_intc1 3>;
 			pcie_intc1: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
index 64156993e052..03070b3bfda1 100644
--- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -62,11 +62,11 @@  Example:
 		interrupt-parent = <&gic>;
 		#interrupt-cells = <1>;
 		interrupts = < 0 89 4 >;
-		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
 		interrupt-map = <0 0 0 0 &pci_express 0>,
-				<0 0 0 1 &pci_express 1>,
-				<0 0 0 2 &pci_express 2>,
-				<0 0 0 3 &pci_express 3>;
+				<0 0 0 IRQ_INTA &pci_express 1>,
+				<0 0 0 IRQ_INTB &pci_express 2>,
+				<0 0 0 IRQ_INTC &pci_express 3>;
 		ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
 
 	};
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index b94078f58d8e..7c6a19e0b131 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -56,10 +56,10 @@  Example SoC configuration:
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
 		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0xff00 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0x0000 0 0 IRQ_INTA &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 IRQ_INTA &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 IRQ_INTB &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@1,0 {
 			reg = <0x800 0 0 0 0>;
diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt b/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
index f131faea3b7c..edfaedfe8c8c 100644
--- a/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
+++ b/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
@@ -35,9 +35,9 @@  Example:
 		 <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
 
 	#interrupt-cells = <1>;
-	interrupt-map-mask = <0 0 0 7>;
-	interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
-			<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
-			<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
-			<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
+	interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+	interrupt-map = <0 0 0 IRQ_INTA &gic0 0 0 0 24 4>,
+			<0 0 0 IRQ_INTB &gic0 0 0 0 25 4>,
+			<0 0 0 IRQ_INTC &gic0 0 0 0 26 4>,
+			<0 0 0 IRQ_INTD &gic0 0 0 0 27 4>;
     };
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
index 557a5089229d..8bb3d935d3fa 100644
--- a/Documentation/devicetree/bindings/pci/pcie-al.txt
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -40,7 +40,7 @@  Example:
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
 		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-map-mask = <0x00 0 0 7>;
-		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+		interrupt-map-mask = <0x00 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0x0000 0 0 IRQ_INTA &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
 	};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index ada80b01bf0c..898599eed2e5 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -251,11 +251,11 @@ 
 		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 IRQ_INTB &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 IRQ_INTC &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 IRQ_INTD &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&gcc PCIE_A_CLK>,
 			 <&gcc PCIE_H_CLK>,
 			 <&gcc PCIE_PHY_CLK>;
@@ -289,11 +289,11 @@ 
 		interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 IRQ_INTB &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 IRQ_INTC &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 IRQ_INTD &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
index ffba4f63d71f..09a4a28fb472 100644
--- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -131,18 +131,18 @@ 
 				0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
 			>;
 
-			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
 			interrupt-map = <
 				/* IDSEL 17 */
-				0x8800 0 0 1 &pciintc 18
-				0x8800 0 0 2 &pciintc 18
-				0x8800 0 0 3 &pciintc 18
-				0x8800 0 0 4 &pciintc 18
+				0x8800 0 0 IRQ_INTA &pciintc 18
+				0x8800 0 0 IRQ_INTB &pciintc 18
+				0x8800 0 0 IRQ_INTC &pciintc 18
+				0x8800 0 0 IRQ_INTD &pciintc 18
 				/* IDSEL 18 */
-				0x9000 0 0 1 &pciintc 19
-				0x9000 0 0 2 &pciintc 19
-				0x9000 0 0 3 &pciintc 19
-				0x9000 0 0 4 &pciintc 19
+				0x9000 0 0 IRQ_INTA &pciintc 19
+				0x9000 0 0 IRQ_INTB &pciintc 19
+				0x9000 0 0 IRQ_INTC &pciintc 19
+				0x9000 0 0 IRQ_INTD &pciintc 19
 			>;
 
 			pci-bridge@1 {
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
index af34c65773fd..4538d18b4c3c 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
@@ -112,11 +112,11 @@  pcie0: pcie@f8000000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreq>;
 	#interrupt-cells = <1>;
-	interrupt-map-mask = <0 0 0 7>;
-	interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-			<0 0 0 2 &pcie0_intc 1>,
-			<0 0 0 3 &pcie0_intc 2>,
-			<0 0 0 4 &pcie0_intc 3>;
+	interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+	interrupt-map = <0 0 0 IRQ_INTA &pcie0_intc 0>,
+			<0 0 0 IRQ_INTB &pcie0_intc 1>,
+			<0 0 0 IRQ_INTC &pcie0_intc 2>,
+			<0 0 0 IRQ_INTD &pcie0_intc 3>;
 	pcie0_intc: interrupt-controller {
 		interrupt-controller;
 		#address-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index d5cbfe6b0d89..795b09755977 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -88,11 +88,11 @@  axi {
 		ti,hwmods = "pcie1";
 		phys = <&pcie1_phy>;
 		phy-names = "pcie-phy0";
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 1>,
+				<0 0 0 IRQ_INTB &pcie_intc 2>,
+				<0 0 0 IRQ_INTC &pcie_intc 3>,
+				<0 0 0 IRQ_INTD &pcie_intc 4>;
 		pcie_intc: interrupt-controller {
 			interrupt-controller;
 			#address-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
index 1fa2c5906d4d..b5416798a638 100644
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
@@ -66,11 +66,11 @@  Example:
 		#interrupt-cells = <1>;
 		interrupt-names = "dma", "msi";
 		interrupts = <0 224 4>, <0 225 4>;
-		interrupt-map-mask = <0 0 0  7>;
-		interrupt-map = <0 0 0  1  &pcie_intc 0>,	/* INTA */
-				<0 0 0  2  &pcie_intc 1>,	/* INTB */
-				<0 0 0  3  &pcie_intc 2>,	/* INTC */
-				<0 0 0  4  &pcie_intc 3>;	/* INTD */
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0  IRQ_INTA  &pcie_intc 0>,
+				<0 0 0  IRQ_INTB  &pcie_intc 1>,
+				<0 0 0  IRQ_INTC  &pcie_intc 2>,
+				<0 0 0  IRQ_INTD  &pcie_intc 3>;
 
 		pcie_intc: legacy-interrupt-controller {
 			interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
index 11063293f761..bfa37aa4933d 100644
--- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
+++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
@@ -50,27 +50,27 @@  pci: pciv3@62000000 {
 		0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
 		0x02000000 0 0x80000000 /* Core module alias memory */
 		0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
-	interrupt-map-mask = <0xf800 0 0 0x7>;
+	interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
 	interrupt-map = <
 	/* IDSEL 9 */
-	0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
-	0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
-	0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
-	0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+	0x4800 0 0 IRQ_INTA &pic 13 /* INT A on slot 9 is irq 13 */
+	0x4800 0 0 IRQ_INTB &pic 14 /* INT B on slot 9 is irq 14 */
+	0x4800 0 0 IRQ_INTC &pic 15 /* INT C on slot 9 is irq 15 */
+	0x4800 0 0 IRQ_INTD &pic 16 /* INT D on slot 9 is irq 16 */
 	/* IDSEL 10 */
-	0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
-	0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
-	0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
-	0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+	0x5000 0 0 IRQ_INTA &pic 14 /* INT A on slot 10 is irq 14 */
+	0x5000 0 0 IRQ_INTB &pic 15 /* INT B on slot 10 is irq 15 */
+	0x5000 0 0 IRQ_INTC &pic 16 /* INT C on slot 10 is irq 16 */
+	0x5000 0 0 IRQ_INTD &pic 13 /* INT D on slot 10 is irq 13 */
 	/* IDSEL 11 */
-	0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
-	0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
-	0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
-	0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+	0x5800 0 0 IRQ_INTA &pic 15 /* INT A on slot 11 is irq 15 */
+	0x5800 0 0 IRQ_INTB &pic 16 /* INT B on slot 11 is irq 16 */
+	0x5800 0 0 IRQ_INTC &pic 13 /* INT C on slot 11 is irq 13 */
+	0x5800 0 0 IRQ_INTD &pic 14 /* INT D on slot 11 is irq 14 */
 	/* IDSEL 12 */
-	0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
-	0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
-	0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
-	0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+	0x6000 0 0 IRQ_INTA &pic 16 /* INT A on slot 12 is irq 16 */
+	0x6000 0 0 IRQ_INTB &pic 13 /* INT B on slot 12 is irq 13 */
+	0x6000 0 0 IRQ_INTC &pic 14 /* INT C on slot 12 is irq 14 */
+	0x6000 0 0 IRQ_INTD &pic 15 /* INT D on slot 12 is irq 15 */
 	>;
 };
diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt
index 0a702b13d2ac..a02c7b9683ac 100644
--- a/Documentation/devicetree/bindings/pci/versatile.txt
+++ b/Documentation/devicetree/bindings/pci/versatile.txt
@@ -36,24 +36,24 @@  pci-controller@10001000 {
 		  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
 		  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
 
-	interrupt-map-mask = <0x1800 0 0 7>;
-	interrupt-map = <0x1800 0 0 1 &sic 28
-			 0x1800 0 0 2 &sic 29
-			 0x1800 0 0 3 &sic 30
-			 0x1800 0 0 4 &sic 27
-
-			 0x1000 0 0 1 &sic 27
-			 0x1000 0 0 2 &sic 28
-			 0x1000 0 0 3 &sic 29
-			 0x1000 0 0 4 &sic 30
-
-			 0x0800 0 0 1 &sic 30
-			 0x0800 0 0 2 &sic 27
-			 0x0800 0 0 3 &sic 28
-			 0x0800 0 0 4 &sic 29
-
-			 0x0000 0 0 1 &sic 29
-			 0x0000 0 0 2 &sic 30
-			 0x0000 0 0 3 &sic 27
-			 0x0000 0 0 4 &sic 28>;
+	interrupt-map-mask = <0x1800 0 0 IRQ_INT_ALL>;
+	interrupt-map = <0x1800 0 0 IRQ_INTA &sic 28
+			 0x1800 0 0 IRQ_INTB &sic 29
+			 0x1800 0 0 IRQ_INTC &sic 30
+			 0x1800 0 0 IRQ_INTD &sic 27
+
+			 0x1000 0 0 IRQ_INTA &sic 27
+			 0x1000 0 0 IRQ_INTB &sic 28
+			 0x1000 0 0 IRQ_INTC &sic 29
+			 0x1000 0 0 IRQ_INTD &sic 30
+
+			 0x0800 0 0 IRQ_INTA &sic 30
+			 0x0800 0 0 IRQ_INTB &sic 27
+			 0x0800 0 0 IRQ_INTC &sic 28
+			 0x0800 0 0 IRQ_INTD &sic 29
+
+			 0x0000 0 0 IRQ_INTA &sic 29
+			 0x0000 0 0 IRQ_INTB &sic 30
+			 0x0000 0 0 IRQ_INTC &sic 27
+			 0x0000 0 0 IRQ_INTD &sic 28>;
 };
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
index 85d9b95234f7..0e84e6621b4a 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
@@ -57,11 +57,11 @@  SoC DTSI:
 			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
 		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
-		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
-				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
-				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
-				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
+		interrupt-map = <0x0 0x0 0x0 IRQ_INTA &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 IRQ_INTB &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 IRQ_INTC &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 IRQ_INTD &gic 0x0 0xc5 0x1>;
 		dma-coherent;
 		clocks = <&pcie0clk 0>;
 		msi-parent= <&msi>;
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
index 92490330dc1c..0f0e3eb64101 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -39,11 +39,11 @@  Example:
 			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
 		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
-		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
-				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
-				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
-				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
+		interrupt-map = <0x0 0x0 0x0 IRQ_INTA &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 IRQ_INTB &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 IRQ_INTC &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 IRQ_INTD &gic 0x0 0xc5 0x1>;
 		dma-coherent;
 		clocks = <&pcie0clk 0>;
 	};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
index 01bf7fdf4c19..5964fdf752bc 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
@@ -47,11 +47,11 @@  nwl_pcie: pcie@fd0e0000 {
 	interrupt-parent = <&gic>;
 	interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
 	interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
-	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-	interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
-			<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
-			<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
-			<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+	interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
+	interrupt-map = <0x0 0x0 0x0 IRQ_INTA &pcie_intc 0x1>,
+			<0x0 0x0 0x0 IRQ_INTB &pcie_intc 0x2>,
+			<0x0 0x0 0x0 IRQ_INTC &pcie_intc 0x3>,
+			<0x0 0x0 0x0 IRQ_INTD &pcie_intc 0x4>;
 
 	msi-parent = <&nwl_pcie>;
 	reg = <0x0 0xfd0e0000 0x0 0x1000>,
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
index fd57a81180a4..82b7d07bda51 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -47,11 +47,11 @@  Zynq:
 		reg = < 0x50000000 0x1000000 >;
 		device_type = "pci";
 		interrupts = < 0 52 4 >;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 1>,
+				<0 0 0 IRQ_INTB &pcie_intc 2>,
+				<0 0 0 IRQ_INTC &pcie_intc 3>,
+				<0 0 0 IRQ_INTD &pcie_intc 4>;
 		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
 
 		pcie_intc: interrupt-controller {
@@ -72,11 +72,11 @@  Microblaze:
 		device_type = "pci";
 		interrupt-parent = <&microblaze_0_intc>;
 		interrupts = <1 2>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
+		interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+		interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 1>,
+				<0 0 0 IRQ_INTB &pcie_intc 2>,
+				<0 0 0 IRQ_INTC &pcie_intc 3>,
+				<0 0 0 IRQ_INTD &pcie_intc 4>;
 		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
 
 		pcie_intc: interrupt-controller {