diff mbox series

[v3,05/12] omap: pdata-quirks: revert pandora specific gpiod additions

Message ID a90b488031c3d5da2feb2f157efa6c4287cf1922.1573122644.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again | expand

Commit Message

H. Nikolaus Schaller Nov. 7, 2019, 10:30 a.m. UTC
introduced by commit

efdfeb079cc3b ("regulator: fixed: Convert to use GPIO descriptor only")

We must remove this from mainline first, so that the following patch
to remove the openpandora quirks for mmc3 and wl1251 cleanly applies
to stable v4.9, v4.14, v4.19 where the above mentioned patch is not yet
present.

Since the code affected is removed (no pandora gpios in pdata-quirks
and more), there will be no matching revert-of-the-revert.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

Comments

Tony Lindgren Nov. 8, 2019, 5:10 p.m. UTC | #1
* H. Nikolaus Schaller <hns@goldelico.com> [191107 10:33]:
> introduced by commit
> 
> efdfeb079cc3b ("regulator: fixed: Convert to use GPIO descriptor only")
> 
> We must remove this from mainline first, so that the following patch
> to remove the openpandora quirks for mmc3 and wl1251 cleanly applies
> to stable v4.9, v4.14, v4.19 where the above mentioned patch is not yet
> present.
> 
> Since the code affected is removed (no pandora gpios in pdata-quirks
> and more), there will be no matching revert-of-the-revert.

This too:

Acked-by: Tony Lindgren <tony@atomide.com>
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 2efd18e8824c..800a602c06ec 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -7,7 +7,6 @@ 
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
 #include <linux/gpio.h>
-#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -334,7 +333,9 @@  static struct regulator_init_data pandora_vmmc3 = {
 static struct fixed_voltage_config pandora_vwlan = {
 	.supply_name		= "vwlan",
 	.microvolts		= 1800000, /* 1.8V */
+	.gpio			= PANDORA_WIFI_NRESET_GPIO,
 	.startup_delay		= 50000, /* 50ms */
+	.enable_high		= 1,
 	.init_data		= &pandora_vmmc3,
 };
 
@@ -346,19 +347,6 @@  static struct platform_device pandora_vwlan_device = {
 	},
 };
 
-static struct gpiod_lookup_table pandora_vwlan_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1",
-	.table = {
-		/*
-		 * As this is a low GPIO number it should be at the first
-		 * GPIO bank.
-		 */
-		GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
 static void pandora_wl1251_init_card(struct mmc_card *card)
 {
 	/*
@@ -380,6 +368,8 @@  static struct omap2_hsmmc_info pandora_mmc3[] = {
 	{
 		.mmc		= 3,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
 		.init_card	= pandora_wl1251_init_card,
 	},
 	{}	/* Terminator */
@@ -418,7 +408,6 @@  static void __init pandora_wl1251_init(void)
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
-	gpiod_add_lookup_table(&pandora_vwlan_gpiod_table);
 	platform_device_register(&pandora_vwlan_device);
 	omap_hsmmc_init(pandora_mmc3);
 	omap_hsmmc_late_init(pandora_mmc3);