diff mbox series

[1/2] dt-bindings: iio: stm32-adc: add max clock rate property

Message ID 1572279108-25916-2-git-send-email-fabrice.gasnier@st.com (mailing list archive)
State New, archived
Headers show
Series iio: adc: stm32: add max clock rate | expand

Commit Message

Fabrice Gasnier Oct. 28, 2019, 4:11 p.m. UTC 
Add optional dt property to tune maximum desired analog clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Rob Herring (Arm) Nov. 6, 2019, 3:29 a.m. UTC | #1 
On Mon, 28 Oct 2019 17:11:47 +0100, Fabrice Gasnier wrote:
> Add optional dt property to tune maximum desired analog clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Jonathan Cameron Nov. 9, 2019, 12:36 p.m. UTC | #2 
On Tue, 5 Nov 2019 21:29:17 -0600
Rob Herring <robh@kernel.org> wrote:

> On Mon, 28 Oct 2019 17:11:47 +0100, Fabrice Gasnier wrote:
> > Add optional dt property to tune maximum desired analog clock rate.
> > 
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> > ---
> >  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >   
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to the togreg branch of iio.git.  Whether I get a pull request
out for this cycle or this hits early in next is dependent on whether
Linus hints at an rc8 and gives an extra week.

Thanks,

Jonathan
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 4c0da8c..8de9331 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -53,6 +53,8 @@  Optional properties:
   analog input switches on stm32mp1.
 - st,syscfg: Phandle to system configuration controller. It can be used to
   control the analog circuitry on stm32mp1.
+- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog
+  circuitry.
 
 Contents of a stm32 adc child node:
 -----------------------------------