| Message ID | 20191106214527.18736-5-nsaenzjulienne@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Raspberry Pi 4 PCIe support | expand |
On 2019-11-06 22:54, Nicolas Saenz Julienne wrote: > From: Jim Quinlan <james.quinlan@broadcom.com> > > This commit adds MSI to the Broadcom STB PCIe host controller. It > does > not add MSIX since that functionality is not in the HW. The MSI > controller is physically located within the PCIe block, however, > there > is no reason why the MSI controller could not be moved elsewhere in > the future. > > Since the internal Brcmstb MSI controller is intertwined with the > PCIe > controller, it is not its own platform device but rather part of the > PCIe platform device. > > This is based on Jim's original submission[1] with some slight > changes > regarding how pcie->msi_target_addr is decided. > > [1] https://patchwork.kernel.org/patch/10605955/ > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > --- > drivers/pci/controller/Kconfig | 2 +- > drivers/pci/controller/pcie-brcmstb.c | 333 > +++++++++++++++++++++++++- > 2 files changed, 332 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/Kconfig > b/drivers/pci/controller/Kconfig > index 8b3aae91d8af..99b972ad3f2f 100644 > --- a/drivers/pci/controller/Kconfig > +++ b/drivers/pci/controller/Kconfig > @@ -284,7 +284,7 @@ config VMD > config PCIE_BRCMSTB > bool "Broadcom Brcmstb PCIe host controller" > depends on ARCH_BRCMSTB || BMIPS_GENERIC > - depends on OF > + depends on OF && PCI_MSI > depends on SOC_BRCMSTB > default ARCH_BRCMSTB || BMIPS_GENERIC > help > diff --git a/drivers/pci/controller/pcie-brcmstb.c > b/drivers/pci/controller/pcie-brcmstb.c > index 880ec11d06a1..26053e69b95f 100644 > --- a/drivers/pci/controller/pcie-brcmstb.c > +++ b/drivers/pci/controller/pcie-brcmstb.c > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > /* Copyright (C) 2009 - 2019 Broadcom */ > > +#include <linux/bitops.h> > #include <linux/clk.h> > #include <linux/compiler.h> > #include <linux/delay.h> > @@ -8,11 +9,13 @@ > #include <linux/interrupt.h> > #include <linux/io.h> > #include <linux/ioport.h> > +#include <linux/irqchip/chained_irq.h> > #include <linux/irqdomain.h> > #include <linux/kernel.h> > #include <linux/list.h> > #include <linux/log2.h> > #include <linux/module.h> > +#include <linux/msi.h> > #include <linux/of_address.h> > #include <linux/of_irq.h> > #include <linux/of_pci.h> > @@ -46,6 +49,9 @@ > #define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 > #define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 > #define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c > +#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 > +#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 > +#define PCIE_MISC_MSI_DATA_CONFIG 0x404c > #define PCIE_MISC_PCIE_CTRL 0x4064 > #define PCIE_MISC_PCIE_STATUS 0x4068 > #define PCIE_MISC_REVISION 0x406c > @@ -54,6 +60,7 @@ > #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 > #define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 > #define PCIE_INTR2_CPU_BASE 0x4300 > +#define PCIE_MSI_INTR2_BASE 0x4500 > > /* > * Broadcom Settop Box PCIe Register Field shift and mask info. The > @@ -114,6 +121,8 @@ > > #define BRCM_NUM_PCIE_OUT_WINS 0x4 > #define BRCM_MAX_SCB 0x4 > +#define BRCM_INT_PCI_MSI_NR 32 > +#define BRCM_PCIE_HW_REV_33 0x0303 > > #define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL > #define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL > @@ -199,6 +208,33 @@ struct brcm_window { > dma_addr_t size; > }; > > +struct brcm_msi { > + struct device *dev; > + void __iomem *base; > + struct device_node *dn; > + struct irq_domain *msi_domain; > + struct irq_domain *inner_domain; > + struct mutex lock; /* guards the alloc/free operations */ > + u64 target_addr; > + int irq; > + > + /* intr_base is the base pointer for interrupt status/set/clr regs > */ > + void __iomem *intr_base; > + > + /* intr_legacy_mask indicates how many bits are MSI interrupts */ > + u32 intr_legacy_mask; > + > + /* > + * intr_legacy_offset indicates bit position of MSI_01. It is > + * to map the register bit position to a hwirq that starts at 0. > + */ > + u32 intr_legacy_offset; > + > + /* used indicates which MSI interrupts have been alloc'd */ > + unsigned long used; > + unsigned int rev; > +}; > + > /* Internal PCIe Host Controller Information.*/ > struct brcm_pcie { > struct device *dev; > @@ -211,7 +247,10 @@ struct brcm_pcie { > bool suspended; > bool ssc; > int gen; > + u64 msi_target_addr; > struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS]; > + struct brcm_msi *msi; > + bool msi_internal; Do you need both of these fields? Is there any case where msi is valid and msi_internal is false? > unsigned int rev; > const int *reg_offsets; > const int *reg_field_info; > @@ -477,6 +516,267 @@ static void brcm_pcie_set_outbound_win(struct > brcm_pcie *pcie, > LIMIT, tmp); > } > > +static struct irq_chip brcm_msi_irq_chip = { > + .name = "Brcm_MSI", > + .irq_mask = pci_msi_mask_irq, > + .irq_unmask = pci_msi_unmask_irq, > +}; > + > +static struct msi_domain_info brcm_msi_domain_info = { > + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | > + MSI_FLAG_PCI_MSIX), Is there a particular reason for not supporting MultiMSI? I won't miss it, but it might be worth documenting the restriction if the HW cannot support it (though I can't immediately see why). > + .chip = &brcm_msi_irq_chip, > +}; > + > +static void brcm_pcie_msi_isr(struct irq_desc *desc) > +{ > + struct irq_chip *chip = irq_desc_get_chip(desc); > + struct brcm_msi *msi; > + unsigned long status, virq; > + u32 mask, bit, hwirq; > + struct device *dev; > + > + chained_irq_enter(chip, desc); > + msi = irq_desc_get_handler_data(desc); > + mask = msi->intr_legacy_mask; > + dev = msi->dev; > + > + while ((status = bcm_readl(msi->intr_base + STATUS) & mask)) { Is this loop really worth it? If, as I imagine, this register is at the end of a wet piece of string, this additional read (likely to return zero) will have a measurable latency impact... > + for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) { > + /* clear the interrupt */ > + bcm_writel(1 << bit, msi->intr_base + CLR); > + > + /* Account for legacy interrupt offset */ > + hwirq = bit - msi->intr_legacy_offset; > + > + virq = irq_find_mapping(msi->inner_domain, hwirq); > + if (virq) { > + if (msi->used & (1 << hwirq)) > + generic_handle_irq(virq); > + else > + dev_info(dev, "unhandled MSI %d\n", > + hwirq); Can this ever happen? If you've found the mapping in the irqdomain, the MSI obviously has been allocated. Or am I missing something? > + } else { > + /* Unknown MSI, just clear it */ > + dev_dbg(dev, "unexpected MSI\n"); > + } > + } > + } > + chained_irq_exit(chip, desc); > +} > + > +static void brcm_compose_msi_msg(struct irq_data *data, struct > msi_msg *msg) > +{ > + struct brcm_msi *msi = irq_data_get_irq_chip_data(data); > + u32 temp; > + > + msg->address_lo = lower_32_bits(msi->target_addr); > + msg->address_hi = upper_32_bits(msi->target_addr); > + temp = bcm_readl(msi->base + PCIE_MISC_MSI_DATA_CONFIG); Do you have to reload it from the HW? > + msg->data = ((temp >> 16) & (temp & 0xffff)) | data->hwirq; > +} > + > +static int brcm_msi_set_affinity(struct irq_data *irq_data, > + const struct cpumask *mask, bool force) > +{ > + return -EINVAL; > +} > + > +static struct irq_chip brcm_msi_bottom_irq_chip = { > + .name = "Brcm_MSI", > + .irq_compose_msi_msg = brcm_compose_msi_msg, > + .irq_set_affinity = brcm_msi_set_affinity, > +}; > + > +static int brcm_msi_alloc(struct brcm_msi *msi) > +{ > + int bit, hwirq; > + > + mutex_lock(&msi->lock); > + bit = ~msi->used ? ffz(msi->used) : -1; > + > + if (bit >= 0 && bit < BRCM_INT_PCI_MSI_NR) { > + msi->used |= (1 << bit); > + hwirq = bit - msi->intr_legacy_offset; > + } else { > + hwirq = -ENOSPC; > + } Please consider using bitmap_find_free_region() and co, instead of open coding your allocator. > + > + mutex_unlock(&msi->lock); > + return hwirq; > +} > + > +static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq) > +{ > + mutex_lock(&msi->lock); > + msi->used &= ~(1 << (hwirq + msi->intr_legacy_offset)); > + mutex_unlock(&msi->lock); > +} > + > +static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned > int virq, > + unsigned int nr_irqs, void *args) > +{ > + struct brcm_msi *msi = domain->host_data; > + int hwirq; > + > + hwirq = brcm_msi_alloc(msi); > + > + if (hwirq < 0) > + return hwirq; > + > + irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq, > + &brcm_msi_bottom_irq_chip, domain->host_data, > + handle_simple_irq, NULL, NULL); simple_irq doesn't quite match what this does. This really should use an edge flow. > + return 0; > +} > + > +static void brcm_irq_domain_free(struct irq_domain *domain, > + unsigned int virq, unsigned int nr_irqs) > +{ > + struct irq_data *d = irq_domain_get_irq_data(domain, virq); > + struct brcm_msi *msi = irq_data_get_irq_chip_data(d); > + > + brcm_msi_free(msi, d->hwirq); > +} > + > +static void brcm_msi_set_regs(struct brcm_msi *msi) > +{ > + u32 data_val, msi_lo, msi_hi; > + > + if (msi->rev >= BRCM_PCIE_HW_REV_33) { > + /* > + * ffe0 -- least sig 5 bits are 0 indicating 32 msgs > + * 6540 -- this is our arbitrary unique data value > + */ > + data_val = 0xffe06540; > + } else { > + /* > + * fff8 -- least sig 3 bits are 0 indicating 8 msgs > + * 6540 -- this is our arbitrary unique data value > + */ > + data_val = 0xfff86540; > + } > + > + /* > + * Make sure we are not masking MSIs. Note that MSIs can be > masked, > + * but that occurs on the PCIe EP device That's not a guarantee, specially with plain MultiMSI. I'm actually minded to move the masking to be purely local on the MSI controllers I maintain. > + */ > + bcm_writel(0xffffffff & msi->intr_legacy_mask, > + msi->intr_base + MASK_CLR); > + > + msi_lo = lower_32_bits(msi->target_addr); > + msi_hi = upper_32_bits(msi->target_addr); > + /* > + * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI > + * enable, which we set to 1. > + */ > + bcm_writel(msi_lo | 1, msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO); > + bcm_writel(msi_hi, msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI); > + bcm_writel(data_val, msi->base + PCIE_MISC_MSI_DATA_CONFIG); > +} > + > +static const struct irq_domain_ops msi_domain_ops = { > + .alloc = brcm_irq_domain_alloc, > + .free = brcm_irq_domain_free, > +}; > + > +static int brcm_allocate_domains(struct brcm_msi *msi) > +{ > + struct fwnode_handle *fwnode = of_node_to_fwnode(msi->dn); > + struct device *dev = msi->dev; > + > + msi->inner_domain = irq_domain_add_linear(NULL, > BRCM_INT_PCI_MSI_NR, > + &msi_domain_ops, msi); > + if (!msi->inner_domain) { > + dev_err(dev, "failed to create IRQ domain\n"); > + return -ENOMEM; > + } > + > + msi->msi_domain = pci_msi_create_irq_domain(fwnode, > + &brcm_msi_domain_info, > + msi->inner_domain); > + if (!msi->msi_domain) { > + dev_err(dev, "failed to create MSI domain\n"); > + irq_domain_remove(msi->inner_domain); > + return -ENOMEM; > + } > + > + return 0; > +} > + > +static void brcm_free_domains(struct brcm_msi *msi) > +{ > + irq_domain_remove(msi->msi_domain); > + irq_domain_remove(msi->inner_domain); > +} > + > +static void brcm_msi_remove(struct brcm_pcie *pcie) > +{ > + struct brcm_msi *msi = pcie->msi; > + > + if (!msi) > + return; > + irq_set_chained_handler(msi->irq, NULL); > + irq_set_handler_data(msi->irq, NULL); > + brcm_free_domains(msi); > +} > + > +static int brcm_pcie_enable_msi(struct brcm_pcie *pcie) > +{ > + struct brcm_msi *msi; > + int irq, ret; > + struct device *dev = pcie->dev; > + > + irq = irq_of_parse_and_map(dev->of_node, 1); > + if (irq <= 0) { > + dev_err(dev, "cannot map msi intr\n"); > + return -ENODEV; > + } > + > + msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL); > + if (!msi) > + return -ENOMEM; > + > + msi->dev = dev; > + msi->base = pcie->base; > + msi->rev = pcie->rev; > + msi->dn = pcie->dn; > + msi->target_addr = pcie->msi_target_addr; > + msi->irq = irq; > + > + ret = brcm_allocate_domains(msi); > + if (ret) > + return ret; You seem to rely on the devm_* allocators to cleanup on failure. But as far as I can see, failing to initialize the MSI subsystem doesn't translate in a PCIe init failure, hence keeping the memory around. > + > + irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi); > + > + if (msi->rev >= BRCM_PCIE_HW_REV_33) { > + msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE; > + /* > + * This version of PCIe hw has only 32 intr bits > + * starting at bit position 0. > + */ > + msi->intr_legacy_mask = 0xffffffff; > + msi->intr_legacy_offset = 0x0; > + msi->used = 0x0; > + > + } else { > + msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE; > + /* > + * This version of PCIe hw has only 8 intr bits starting > + * at bit position 24. > + */ > + msi->intr_legacy_mask = 0xff000000; > + msi->intr_legacy_offset = 24; > + msi->used = 0x00ffffff; > + } > + > + brcm_msi_set_regs(msi); > + pcie->msi = msi; > + > + return 0; > +} > + > /* Configuration space read/write support */ > static int cfg_index(int busnr, int devfn, int reg) > { > @@ -643,6 +943,18 @@ static int brcm_pcie_setup(struct brcm_pcie > *pcie) > if (ret) > return ret; > > + /* > + * We ideally want the MSI target address to be located in the > 32bit > + * addressable memory area. Some devices might depend on it. This > is > + * possible either when the inbound window is located above the > lower > + * 4GB or when the inbound and outbound areas fit in the lower 4GB > of > + * memory. > + */ > + if (rc_bar2_offset >= SZ_4G || (rc_bar2_size + rc_bar2_offset) <= > SZ_4G) > + pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; > + else > + pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB; > + > tmp = lower_32_bits(rc_bar2_offset); > tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, > encode_ibar_size(rc_bar2_size)); > @@ -816,6 +1128,9 @@ static int brcm_pcie_resume(struct device *dev) > if (ret) > return ret; > > + if (pcie->msi && pcie->msi_internal) > + brcm_msi_set_regs(pcie->msi); > + > pcie->suspended = false; > > return 0; > @@ -823,6 +1138,7 @@ static int brcm_pcie_resume(struct device *dev) > > static void _brcm_pcie_remove(struct brcm_pcie *pcie) > { > + brcm_msi_remove(pcie); > turn_off(pcie); > clk_disable_unprepare(pcie->clk); > clk_put(pcie->clk); > @@ -847,7 +1163,7 @@ MODULE_DEVICE_TABLE(of, brcm_pcie_match); > > static int brcm_pcie_probe(struct platform_device *pdev) > { > - struct device_node *dn = pdev->dev.of_node; > + struct device_node *dn = pdev->dev.of_node, *msi_dn; > const struct of_device_id *of_id; > const struct pcie_cfg_data *data; > struct resource *res; > @@ -923,6 +1239,20 @@ static int brcm_pcie_probe(struct > platform_device *pdev) > if (ret) > goto fail; > > + msi_dn = of_parse_phandle(pcie->dn, "msi-parent", 0); > + /* Use the internal MSI if no msi-parent property */ > + if (!msi_dn) > + msi_dn = pcie->dn; > + > + if (pci_msi_enabled() && msi_dn == pcie->dn) { > + ret = brcm_pcie_enable_msi(pcie); > + if (ret) > + dev_err(pcie->dev, > + "probe of internal MSI failed: %d)", ret); > + else > + pcie->msi_internal = true; > + } > + > bridge->dev.parent = &pdev->dev; > bridge->busnr = 0; > bridge->ops = &brcm_pcie_ops; > @@ -944,7 +1274,6 @@ static int brcm_pcie_probe(struct > platform_device *pdev) > pcie->root_bus = bridge->bus; > > return 0; > - > fail: > _brcm_pcie_remove(pcie); > return ret; Thanks, M.
Hi Marc, thanks for the review! On Thu, 2019-11-07 at 16:49 +0109, Marc Zyngier wrote: > On 2019-11-06 22:54, Nicolas Saenz Julienne wrote: > > From: Jim Quinlan <james.quinlan@broadcom.com> > > > > This commit adds MSI to the Broadcom STB PCIe host controller. It > > does > > not add MSIX since that functionality is not in the HW. The MSI > > controller is physically located within the PCIe block, however, > > there > > is no reason why the MSI controller could not be moved elsewhere in > > the future. > > > > Since the internal Brcmstb MSI controller is intertwined with the > > PCIe > > controller, it is not its own platform device but rather part of the > > PCIe platform device. > > > > This is based on Jim's original submission[1] with some slight > > changes > > regarding how pcie->msi_target_addr is decided. > > > > [1] https://patchwork.kernel.org/patch/10605955/ > > > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> > > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- > > drivers/pci/controller/Kconfig | 2 +- > > drivers/pci/controller/pcie-brcmstb.c | 333 > > +++++++++++++++++++++++++- > > 2 files changed, 332 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/pci/controller/Kconfig > > b/drivers/pci/controller/Kconfig > > index 8b3aae91d8af..99b972ad3f2f 100644 > > --- a/drivers/pci/controller/Kconfig > > +++ b/drivers/pci/controller/Kconfig > > @@ -284,7 +284,7 @@ config VMD > > config PCIE_BRCMSTB > > bool "Broadcom Brcmstb PCIe host controller" > > depends on ARCH_BRCMSTB || BMIPS_GENERIC > > - depends on OF > > + depends on OF && PCI_MSI > > depends on SOC_BRCMSTB > > default ARCH_BRCMSTB || BMIPS_GENERIC > > help > > diff --git a/drivers/pci/controller/pcie-brcmstb.c > > b/drivers/pci/controller/pcie-brcmstb.c > > index 880ec11d06a1..26053e69b95f 100644 > > --- a/drivers/pci/controller/pcie-brcmstb.c > > +++ b/drivers/pci/controller/pcie-brcmstb.c > > @@ -1,6 +1,7 @@ > > // SPDX-License-Identifier: GPL-2.0 > > /* Copyright (C) 2009 - 2019 Broadcom */ > > > > +#include <linux/bitops.h> > > #include <linux/clk.h> > > #include <linux/compiler.h> > > #include <linux/delay.h> > > @@ -8,11 +9,13 @@ > > #include <linux/interrupt.h> > > #include <linux/io.h> > > #include <linux/ioport.h> > > +#include <linux/irqchip/chained_irq.h> > > #include <linux/irqdomain.h> > > #include <linux/kernel.h> > > #include <linux/list.h> > > #include <linux/log2.h> > > #include <linux/module.h> > > +#include <linux/msi.h> > > #include <linux/of_address.h> > > #include <linux/of_irq.h> > > #include <linux/of_pci.h> > > @@ -46,6 +49,9 @@ > > #define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 > > #define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 > > #define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c > > +#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 > > +#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 > > +#define PCIE_MISC_MSI_DATA_CONFIG 0x404c > > #define PCIE_MISC_PCIE_CTRL 0x4064 > > #define PCIE_MISC_PCIE_STATUS 0x4068 > > #define PCIE_MISC_REVISION 0x406c > > @@ -54,6 +60,7 @@ > > #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 > > #define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 > > #define PCIE_INTR2_CPU_BASE 0x4300 > > +#define PCIE_MSI_INTR2_BASE 0x4500 > > > > /* > > * Broadcom Settop Box PCIe Register Field shift and mask info. The > > @@ -114,6 +121,8 @@ > > > > #define BRCM_NUM_PCIE_OUT_WINS 0x4 > > #define BRCM_MAX_SCB 0x4 > > +#define BRCM_INT_PCI_MSI_NR 32 > > +#define BRCM_PCIE_HW_REV_33 0x0303 > > > > #define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL > > #define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL > > @@ -199,6 +208,33 @@ struct brcm_window { > > dma_addr_t size; > > }; > > > > +struct brcm_msi { > > + struct device *dev; > > + void __iomem *base; > > + struct device_node *dn; > > + struct irq_domain *msi_domain; > > + struct irq_domain *inner_domain; > > + struct mutex lock; /* guards the alloc/free operations */ > > + u64 target_addr; > > + int irq; > > + > > + /* intr_base is the base pointer for interrupt status/set/clr regs > > */ > > + void __iomem *intr_base; > > + > > + /* intr_legacy_mask indicates how many bits are MSI interrupts */ > > + u32 intr_legacy_mask; > > + > > + /* > > + * intr_legacy_offset indicates bit position of MSI_01. It is > > + * to map the register bit position to a hwirq that starts at 0. > > + */ > > + u32 intr_legacy_offset; > > + > > + /* used indicates which MSI interrupts have been alloc'd */ > > + unsigned long used; > > + unsigned int rev; > > +}; > > + > > /* Internal PCIe Host Controller Information.*/ > > struct brcm_pcie { > > struct device *dev; > > @@ -211,7 +247,10 @@ struct brcm_pcie { > > bool suspended; > > bool ssc; > > int gen; > > + u64 msi_target_addr; > > struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS]; > > + struct brcm_msi *msi; > > + bool msi_internal; > > Do you need both of these fields? Is there any case where msi is valid > and msi_internal is false? You're right, got rid of msi_internal. > > > unsigned int rev; > > const int *reg_offsets; > > const int *reg_field_info; > > @@ -477,6 +516,267 @@ static void brcm_pcie_set_outbound_win(struct > > brcm_pcie *pcie, > > LIMIT, tmp); > > } > > > > +static struct irq_chip brcm_msi_irq_chip = { > > + .name = "Brcm_MSI", > > + .irq_mask = pci_msi_mask_irq, > > + .irq_unmask = pci_msi_unmask_irq, > > +}; > > + > > +static struct msi_domain_info brcm_msi_domain_info = { > > + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | > > + MSI_FLAG_PCI_MSIX), > > Is there a particular reason for not supporting MultiMSI? I won't miss > it, but it might be worth documenting the restriction if the HW cannot > support it (though I can't immediately see why). There is no actual restriction. As Jim tells me, there never was the need for it. If it's fine with you, we'll leave that as an enhancement for the future, specially since the RPi's XHCI device only uses one MSI interrupt. > > + .chip = &brcm_msi_irq_chip, > > +}; > > + > > +static void brcm_pcie_msi_isr(struct irq_desc *desc) > > +{ > > + struct irq_chip *chip = irq_desc_get_chip(desc); > > + struct brcm_msi *msi; > > + unsigned long status, virq; > > + u32 mask, bit, hwirq; > > + struct device *dev; > > + > > + chained_irq_enter(chip, desc); > > + msi = irq_desc_get_handler_data(desc); > > + mask = msi->intr_legacy_mask; > > + dev = msi->dev; > > + > > + while ((status = bcm_readl(msi->intr_base + STATUS) & mask)) { > > Is this loop really worth it? If, as I imagine, this register is at the > end of a wet piece of string, this additional read (likely to return > zero) > will have a measurable latency impact... I think this one was cargo-culted, TBH this pattern is all over the place. Though, now that you point it out, I can't really provide a justification for it. Maybe Jim can contradict me here, but It's working fine without it. > > + for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) { > > + /* clear the interrupt */ > > + bcm_writel(1 << bit, msi->intr_base + CLR); > > + > > + /* Account for legacy interrupt offset */ > > + hwirq = bit - msi->intr_legacy_offset; > > + > > + virq = irq_find_mapping(msi->inner_domain, hwirq); > > + if (virq) { > > + if (msi->used & (1 << hwirq)) > > + generic_handle_irq(virq); > > + else > > + dev_info(dev, "unhandled MSI %d\n", > > + hwirq); > > Can this ever happen? If you've found the mapping in the irqdomain, > the MSI obviously has been allocated. Or am I missing something? Agree, I'll get rid of it. > > + } else { > > + /* Unknown MSI, just clear it */ > > + dev_dbg(dev, "unexpected MSI\n"); > > + } > > + } > > + } > > + chained_irq_exit(chip, desc); > > +} > > + > > +static void brcm_compose_msi_msg(struct irq_data *data, struct > > msi_msg *msg) > > +{ > > + struct brcm_msi *msi = irq_data_get_irq_chip_data(data); > > + u32 temp; > > + > > + msg->address_lo = lower_32_bits(msi->target_addr); > > + msg->address_hi = upper_32_bits(msi->target_addr); > > + temp = bcm_readl(msi->base + PCIE_MISC_MSI_DATA_CONFIG); Well as far as the RPi is concerned I can do without it. I don't know if there is an odd case on STB devices where we need it, maybe Jim can shine some light into it. Regardless I think I'll remove it for now, we can then fix it once we enable other users for the controller. > > + msg->data = ((temp >> 16) & (temp & 0xffff)) | data->hwirq; > > +} > > + > > +static int brcm_msi_set_affinity(struct irq_data *irq_data, > > + const struct cpumask *mask, bool force) > > +{ > > + return -EINVAL; > > +} > > + > > +static struct irq_chip brcm_msi_bottom_irq_chip = { > > + .name = "Brcm_MSI", > > + .irq_compose_msi_msg = brcm_compose_msi_msg, > > + .irq_set_affinity = brcm_msi_set_affinity, > > +}; > > + > > +static int brcm_msi_alloc(struct brcm_msi *msi) > > +{ > > + int bit, hwirq; > > + > > + mutex_lock(&msi->lock); > > + bit = ~msi->used ? ffz(msi->used) : -1; > > + > > + if (bit >= 0 && bit < BRCM_INT_PCI_MSI_NR) { > > + msi->used |= (1 << bit); > > + hwirq = bit - msi->intr_legacy_offset; > > + } else { > > + hwirq = -ENOSPC; > > + } > > Please consider using bitmap_find_free_region() and co, instead of > open coding your allocator. Noted. > > + > > + mutex_unlock(&msi->lock); > > + return hwirq; > > +} > > + > > +static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq) > > +{ > > + mutex_lock(&msi->lock); > > + msi->used &= ~(1 << (hwirq + msi->intr_legacy_offset)); > > + mutex_unlock(&msi->lock); > > +} > > + > > +static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned > > int virq, > > + unsigned int nr_irqs, void *args) > > +{ > > + struct brcm_msi *msi = domain->host_data; > > + int hwirq; > > + > > + hwirq = brcm_msi_alloc(msi); > > + > > + if (hwirq < 0) > > + return hwirq; > > + > > + irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq, > > + &brcm_msi_bottom_irq_chip, domain->host_data, > > + handle_simple_irq, NULL, NULL); > > simple_irq doesn't quite match what this does. This really should > use an edge flow. Ok, I'll look into it. > > + return 0; > > +} > > + > > +static void brcm_irq_domain_free(struct irq_domain *domain, > > + unsigned int virq, unsigned int nr_irqs) > > +{ > > + struct irq_data *d = irq_domain_get_irq_data(domain, virq); > > + struct brcm_msi *msi = irq_data_get_irq_chip_data(d); > > + > > + brcm_msi_free(msi, d->hwirq); > > +} > > + > > +static void brcm_msi_set_regs(struct brcm_msi *msi) > > +{ > > + u32 data_val, msi_lo, msi_hi; > > + > > + if (msi->rev >= BRCM_PCIE_HW_REV_33) { > > + /* > > + * ffe0 -- least sig 5 bits are 0 indicating 32 msgs > > + * 6540 -- this is our arbitrary unique data value > > + */ > > + data_val = 0xffe06540; > > + } else { > > + /* > > + * fff8 -- least sig 3 bits are 0 indicating 8 msgs > > + * 6540 -- this is our arbitrary unique data value > > + */ > > + data_val = 0xfff86540; > > + } > > + > > + /* > > + * Make sure we are not masking MSIs. Note that MSIs can be > > masked, > > + * but that occurs on the PCIe EP device > > That's not a guarantee, specially with plain MultiMSI. I'm actually > minded to move the masking to be purely local on the MSI controllers > I maintain. Sorry, I'm a little lost here. The way I understand it after reset, even with multiMSI, on the EP side all vectors are umasked. So it would make sense to do the same on the controller. The way I see it, we want to avoid using this register anyway, as with multiMSI we'd only get function wide masking, which I guess is not all that useful. > > + */ > > + bcm_writel(0xffffffff & msi->intr_legacy_mask, > > + msi->intr_base + MASK_CLR); > > + > > + msi_lo = lower_32_bits(msi->target_addr); > > + msi_hi = upper_32_bits(msi->target_addr); > > + /* > > + * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI > > + * enable, which we set to 1. > > + */ > > + bcm_writel(msi_lo | 1, msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO); > > + bcm_writel(msi_hi, msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI); > > + bcm_writel(data_val, msi->base + PCIE_MISC_MSI_DATA_CONFIG); > > +} > > + > > +static const struct irq_domain_ops msi_domain_ops = { > > + .alloc = brcm_irq_domain_alloc, > > + .free = brcm_irq_domain_free, > > +}; > > + > > +static int brcm_allocate_domains(struct brcm_msi *msi) > > +{ > > + struct fwnode_handle *fwnode = of_node_to_fwnode(msi->dn); > > + struct device *dev = msi->dev; > > + > > + msi->inner_domain = irq_domain_add_linear(NULL, > > BRCM_INT_PCI_MSI_NR, > > + &msi_domain_ops, msi); > > + if (!msi->inner_domain) { > > + dev_err(dev, "failed to create IRQ domain\n"); > > + return -ENOMEM; > > + } > > + > > + msi->msi_domain = pci_msi_create_irq_domain(fwnode, > > + &brcm_msi_domain_info, > > + msi->inner_domain); > > + if (!msi->msi_domain) { > > + dev_err(dev, "failed to create MSI domain\n"); > > + irq_domain_remove(msi->inner_domain); > > + return -ENOMEM; > > + } > > + > > + return 0; > > +} > > + > > +static void brcm_free_domains(struct brcm_msi *msi) > > +{ > > + irq_domain_remove(msi->msi_domain); > > + irq_domain_remove(msi->inner_domain); > > +} > > + > > +static void brcm_msi_remove(struct brcm_pcie *pcie) > > +{ > > + struct brcm_msi *msi = pcie->msi; > > + > > + if (!msi) > > + return; > > + irq_set_chained_handler(msi->irq, NULL); > > + irq_set_handler_data(msi->irq, NULL); > > + brcm_free_domains(msi); > > +} > > + > > +static int brcm_pcie_enable_msi(struct brcm_pcie *pcie) > > +{ > > + struct brcm_msi *msi; > > + int irq, ret; > > + struct device *dev = pcie->dev; > > + > > + irq = irq_of_parse_and_map(dev->of_node, 1); > > + if (irq <= 0) { > > + dev_err(dev, "cannot map msi intr\n"); > > + return -ENODEV; > > + } > > + > > + msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL); > > + if (!msi) > > + return -ENOMEM; > > + > > + msi->dev = dev; > > + msi->base = pcie->base; > > + msi->rev = pcie->rev; > > + msi->dn = pcie->dn; > > + msi->target_addr = pcie->msi_target_addr; > > + msi->irq = irq; > > + > > + ret = brcm_allocate_domains(msi); > > + if (ret) > > + return ret; > > You seem to rely on the devm_* allocators to cleanup on failure. But as > far > as I can see, failing to initialize the MSI subsystem doesn't translate > in > a PCIe init failure, hence keeping the memory around. Indeed, I see what you mean. I say let's fail. Regards, Nicolas
Hi Nicolas, On 2019-11-11 12:31, Nicolas Saenz Julienne wrote: > Hi Marc, > thanks for the review! > > On Thu, 2019-11-07 at 16:49 +0109, Marc Zyngier wrote: >> On 2019-11-06 22:54, Nicolas Saenz Julienne wrote: >> > From: Jim Quinlan <james.quinlan@broadcom.com> >> > >> > This commit adds MSI to the Broadcom STB PCIe host controller. It >> > does >> > not add MSIX since that functionality is not in the HW. The MSI >> > controller is physically located within the PCIe block, however, >> > there >> > is no reason why the MSI controller could not be moved elsewhere >> in >> > the future. >> > >> > Since the internal Brcmstb MSI controller is intertwined with the >> > PCIe >> > controller, it is not its own platform device but rather part of >> the >> > PCIe platform device. >> > >> > This is based on Jim's original submission[1] with some slight >> > changes >> > regarding how pcie->msi_target_addr is decided. >> > >> > [1] https://patchwork.kernel.org/patch/10605955/ >> > >> > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> >> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >> > --- >> > drivers/pci/controller/Kconfig | 2 +- >> > drivers/pci/controller/pcie-brcmstb.c | 333 >> > +++++++++++++++++++++++++- >> > 2 files changed, 332 insertions(+), 3 deletions(-) [...] >> > +static struct msi_domain_info brcm_msi_domain_info = { >> > + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | >> > + MSI_FLAG_PCI_MSIX), >> >> Is there a particular reason for not supporting MultiMSI? I won't >> miss >> it, but it might be worth documenting the restriction if the HW >> cannot >> support it (though I can't immediately see why). > > There is no actual restriction. As Jim tells me, there never was the > need for > it. If it's fine with you, we'll leave that as an enhancement for the > future, > specially since the RPi's XHCI device only uses one MSI interrupt. Sure, that's fine. But as soon as someone takes this SoC and sticks it on a different board (RPi CM4 anyone?), this will become a requirement (I thought MultiMSI dead 4 years ago, and have been proved wrong many times since). > >> > + .chip = &brcm_msi_irq_chip, >> > +}; >> > + >> > +static void brcm_pcie_msi_isr(struct irq_desc *desc) >> > +{ >> > + struct irq_chip *chip = irq_desc_get_chip(desc); >> > + struct brcm_msi *msi; >> > + unsigned long status, virq; >> > + u32 mask, bit, hwirq; >> > + struct device *dev; >> > + >> > + chained_irq_enter(chip, desc); >> > + msi = irq_desc_get_handler_data(desc); >> > + mask = msi->intr_legacy_mask; >> > + dev = msi->dev; >> > + >> > + while ((status = bcm_readl(msi->intr_base + STATUS) & mask)) { >> >> Is this loop really worth it? If, as I imagine, this register is at >> the >> end of a wet piece of string, this additional read (likely to return >> zero) >> will have a measurable latency impact... > > I think this one was cargo-culted, TBH this pattern is all over the > place. > Though, now that you point it out, I can't really provide a > justification for > it. Maybe Jim can contradict me here, but It's working fine without > it. I know this pattern is ultra common (hey, the GIC uses it), but I'm somehow doubtful of its benefit. On GICv3, not reading the status register again has given us a performance boost for most workloads. [...] >> > + /* >> > + * Make sure we are not masking MSIs. Note that MSIs can be >> > masked, >> > + * but that occurs on the PCIe EP device >> >> That's not a guarantee, specially with plain MultiMSI. I'm actually >> minded to move the masking to be purely local on the MSI controllers >> I maintain. > > Sorry, I'm a little lost here. The way I understand it after reset, > even with > multiMSI, on the EP side all vectors are umasked. So it would make > sense to do > the same on the controller. > > The way I see it, we want to avoid using this register anyway, as > with multiMSI > we'd only get function wide masking, which I guess is not all that > useful. Yeah, I wasn't 100% clear. Unless you have MSI-X, there is no guarantee to have a mask bit per MSI. Multi-MSI definitely has only this problem. My advice would be to let the PCI layer deal with enabling/disabling interrupts at the endpoint level, and let this driver manage the masking at its own level, using the MASK registers. Thanks, M.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 8b3aae91d8af..99b972ad3f2f 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -284,7 +284,7 @@ config VMD config PCIE_BRCMSTB bool "Broadcom Brcmstb PCIe host controller" depends on ARCH_BRCMSTB || BMIPS_GENERIC - depends on OF + depends on OF && PCI_MSI depends on SOC_BRCMSTB default ARCH_BRCMSTB || BMIPS_GENERIC help diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 880ec11d06a1..26053e69b95f 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (C) 2009 - 2019 Broadcom */ +#include <linux/bitops.h> #include <linux/clk.h> #include <linux/compiler.h> #include <linux/delay.h> @@ -8,11 +9,13 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/ioport.h> +#include <linux/irqchip/chained_irq.h> #include <linux/irqdomain.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/log2.h> #include <linux/module.h> +#include <linux/msi.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_pci.h> @@ -46,6 +49,9 @@ #define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 #define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 #define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c +#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 +#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 +#define PCIE_MISC_MSI_DATA_CONFIG 0x404c #define PCIE_MISC_PCIE_CTRL 0x4064 #define PCIE_MISC_PCIE_STATUS 0x4068 #define PCIE_MISC_REVISION 0x406c @@ -54,6 +60,7 @@ #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 #define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 #define PCIE_INTR2_CPU_BASE 0x4300 +#define PCIE_MSI_INTR2_BASE 0x4500 /* * Broadcom Settop Box PCIe Register Field shift and mask info. The @@ -114,6 +121,8 @@ #define BRCM_NUM_PCIE_OUT_WINS 0x4 #define BRCM_MAX_SCB 0x4 +#define BRCM_INT_PCI_MSI_NR 32 +#define BRCM_PCIE_HW_REV_33 0x0303 #define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL #define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL @@ -199,6 +208,33 @@ struct brcm_window { dma_addr_t size; }; +struct brcm_msi { + struct device *dev; + void __iomem *base; + struct device_node *dn; + struct irq_domain *msi_domain; + struct irq_domain *inner_domain; + struct mutex lock; /* guards the alloc/free operations */ + u64 target_addr; + int irq; + + /* intr_base is the base pointer for interrupt status/set/clr regs */ + void __iomem *intr_base; + + /* intr_legacy_mask indicates how many bits are MSI interrupts */ + u32 intr_legacy_mask; + + /* + * intr_legacy_offset indicates bit position of MSI_01. It is + * to map the register bit position to a hwirq that starts at 0. + */ + u32 intr_legacy_offset; + + /* used indicates which MSI interrupts have been alloc'd */ + unsigned long used; + unsigned int rev; +}; + /* Internal PCIe Host Controller Information.*/ struct brcm_pcie { struct device *dev; @@ -211,7 +247,10 @@ struct brcm_pcie { bool suspended; bool ssc; int gen; + u64 msi_target_addr; struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS]; + struct brcm_msi *msi; + bool msi_internal; unsigned int rev; const int *reg_offsets; const int *reg_field_info; @@ -477,6 +516,267 @@ static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, LIMIT, tmp); } +static struct irq_chip brcm_msi_irq_chip = { + .name = "Brcm_MSI", + .irq_mask = pci_msi_mask_irq, + .irq_unmask = pci_msi_unmask_irq, +}; + +static struct msi_domain_info brcm_msi_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | + MSI_FLAG_PCI_MSIX), + .chip = &brcm_msi_irq_chip, +}; + +static void brcm_pcie_msi_isr(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct brcm_msi *msi; + unsigned long status, virq; + u32 mask, bit, hwirq; + struct device *dev; + + chained_irq_enter(chip, desc); + msi = irq_desc_get_handler_data(desc); + mask = msi->intr_legacy_mask; + dev = msi->dev; + + while ((status = bcm_readl(msi->intr_base + STATUS) & mask)) { + for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) { + /* clear the interrupt */ + bcm_writel(1 << bit, msi->intr_base + CLR); + + /* Account for legacy interrupt offset */ + hwirq = bit - msi->intr_legacy_offset; + + virq = irq_find_mapping(msi->inner_domain, hwirq); + if (virq) { + if (msi->used & (1 << hwirq)) + generic_handle_irq(virq); + else + dev_info(dev, "unhandled MSI %d\n", + hwirq); + } else { + /* Unknown MSI, just clear it */ + dev_dbg(dev, "unexpected MSI\n"); + } + } + } + chained_irq_exit(chip, desc); +} + +static void brcm_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) +{ + struct brcm_msi *msi = irq_data_get_irq_chip_data(data); + u32 temp; + + msg->address_lo = lower_32_bits(msi->target_addr); + msg->address_hi = upper_32_bits(msi->target_addr); + temp = bcm_readl(msi->base + PCIE_MISC_MSI_DATA_CONFIG); + msg->data = ((temp >> 16) & (temp & 0xffff)) | data->hwirq; +} + +static int brcm_msi_set_affinity(struct irq_data *irq_data, + const struct cpumask *mask, bool force) +{ + return -EINVAL; +} + +static struct irq_chip brcm_msi_bottom_irq_chip = { + .name = "Brcm_MSI", + .irq_compose_msi_msg = brcm_compose_msi_msg, + .irq_set_affinity = brcm_msi_set_affinity, +}; + +static int brcm_msi_alloc(struct brcm_msi *msi) +{ + int bit, hwirq; + + mutex_lock(&msi->lock); + bit = ~msi->used ? ffz(msi->used) : -1; + + if (bit >= 0 && bit < BRCM_INT_PCI_MSI_NR) { + msi->used |= (1 << bit); + hwirq = bit - msi->intr_legacy_offset; + } else { + hwirq = -ENOSPC; + } + + mutex_unlock(&msi->lock); + return hwirq; +} + +static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq) +{ + mutex_lock(&msi->lock); + msi->used &= ~(1 << (hwirq + msi->intr_legacy_offset)); + mutex_unlock(&msi->lock); +} + +static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *args) +{ + struct brcm_msi *msi = domain->host_data; + int hwirq; + + hwirq = brcm_msi_alloc(msi); + + if (hwirq < 0) + return hwirq; + + irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq, + &brcm_msi_bottom_irq_chip, domain->host_data, + handle_simple_irq, NULL, NULL); + return 0; +} + +static void brcm_irq_domain_free(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs) +{ + struct irq_data *d = irq_domain_get_irq_data(domain, virq); + struct brcm_msi *msi = irq_data_get_irq_chip_data(d); + + brcm_msi_free(msi, d->hwirq); +} + +static void brcm_msi_set_regs(struct brcm_msi *msi) +{ + u32 data_val, msi_lo, msi_hi; + + if (msi->rev >= BRCM_PCIE_HW_REV_33) { + /* + * ffe0 -- least sig 5 bits are 0 indicating 32 msgs + * 6540 -- this is our arbitrary unique data value + */ + data_val = 0xffe06540; + } else { + /* + * fff8 -- least sig 3 bits are 0 indicating 8 msgs + * 6540 -- this is our arbitrary unique data value + */ + data_val = 0xfff86540; + } + + /* + * Make sure we are not masking MSIs. Note that MSIs can be masked, + * but that occurs on the PCIe EP device + */ + bcm_writel(0xffffffff & msi->intr_legacy_mask, + msi->intr_base + MASK_CLR); + + msi_lo = lower_32_bits(msi->target_addr); + msi_hi = upper_32_bits(msi->target_addr); + /* + * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI + * enable, which we set to 1. + */ + bcm_writel(msi_lo | 1, msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO); + bcm_writel(msi_hi, msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI); + bcm_writel(data_val, msi->base + PCIE_MISC_MSI_DATA_CONFIG); +} + +static const struct irq_domain_ops msi_domain_ops = { + .alloc = brcm_irq_domain_alloc, + .free = brcm_irq_domain_free, +}; + +static int brcm_allocate_domains(struct brcm_msi *msi) +{ + struct fwnode_handle *fwnode = of_node_to_fwnode(msi->dn); + struct device *dev = msi->dev; + + msi->inner_domain = irq_domain_add_linear(NULL, BRCM_INT_PCI_MSI_NR, + &msi_domain_ops, msi); + if (!msi->inner_domain) { + dev_err(dev, "failed to create IRQ domain\n"); + return -ENOMEM; + } + + msi->msi_domain = pci_msi_create_irq_domain(fwnode, + &brcm_msi_domain_info, + msi->inner_domain); + if (!msi->msi_domain) { + dev_err(dev, "failed to create MSI domain\n"); + irq_domain_remove(msi->inner_domain); + return -ENOMEM; + } + + return 0; +} + +static void brcm_free_domains(struct brcm_msi *msi) +{ + irq_domain_remove(msi->msi_domain); + irq_domain_remove(msi->inner_domain); +} + +static void brcm_msi_remove(struct brcm_pcie *pcie) +{ + struct brcm_msi *msi = pcie->msi; + + if (!msi) + return; + irq_set_chained_handler(msi->irq, NULL); + irq_set_handler_data(msi->irq, NULL); + brcm_free_domains(msi); +} + +static int brcm_pcie_enable_msi(struct brcm_pcie *pcie) +{ + struct brcm_msi *msi; + int irq, ret; + struct device *dev = pcie->dev; + + irq = irq_of_parse_and_map(dev->of_node, 1); + if (irq <= 0) { + dev_err(dev, "cannot map msi intr\n"); + return -ENODEV; + } + + msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL); + if (!msi) + return -ENOMEM; + + msi->dev = dev; + msi->base = pcie->base; + msi->rev = pcie->rev; + msi->dn = pcie->dn; + msi->target_addr = pcie->msi_target_addr; + msi->irq = irq; + + ret = brcm_allocate_domains(msi); + if (ret) + return ret; + + irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi); + + if (msi->rev >= BRCM_PCIE_HW_REV_33) { + msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE; + /* + * This version of PCIe hw has only 32 intr bits + * starting at bit position 0. + */ + msi->intr_legacy_mask = 0xffffffff; + msi->intr_legacy_offset = 0x0; + msi->used = 0x0; + + } else { + msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE; + /* + * This version of PCIe hw has only 8 intr bits starting + * at bit position 24. + */ + msi->intr_legacy_mask = 0xff000000; + msi->intr_legacy_offset = 24; + msi->used = 0x00ffffff; + } + + brcm_msi_set_regs(msi); + pcie->msi = msi; + + return 0; +} + /* Configuration space read/write support */ static int cfg_index(int busnr, int devfn, int reg) { @@ -643,6 +943,18 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) if (ret) return ret; + /* + * We ideally want the MSI target address to be located in the 32bit + * addressable memory area. Some devices might depend on it. This is + * possible either when the inbound window is located above the lower + * 4GB or when the inbound and outbound areas fit in the lower 4GB of + * memory. + */ + if (rc_bar2_offset >= SZ_4G || (rc_bar2_size + rc_bar2_offset) <= SZ_4G) + pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; + else + pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB; + tmp = lower_32_bits(rc_bar2_offset); tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, encode_ibar_size(rc_bar2_size)); @@ -816,6 +1128,9 @@ static int brcm_pcie_resume(struct device *dev) if (ret) return ret; + if (pcie->msi && pcie->msi_internal) + brcm_msi_set_regs(pcie->msi); + pcie->suspended = false; return 0; @@ -823,6 +1138,7 @@ static int brcm_pcie_resume(struct device *dev) static void _brcm_pcie_remove(struct brcm_pcie *pcie) { + brcm_msi_remove(pcie); turn_off(pcie); clk_disable_unprepare(pcie->clk); clk_put(pcie->clk); @@ -847,7 +1163,7 @@ MODULE_DEVICE_TABLE(of, brcm_pcie_match); static int brcm_pcie_probe(struct platform_device *pdev) { - struct device_node *dn = pdev->dev.of_node; + struct device_node *dn = pdev->dev.of_node, *msi_dn; const struct of_device_id *of_id; const struct pcie_cfg_data *data; struct resource *res; @@ -923,6 +1239,20 @@ static int brcm_pcie_probe(struct platform_device *pdev) if (ret) goto fail; + msi_dn = of_parse_phandle(pcie->dn, "msi-parent", 0); + /* Use the internal MSI if no msi-parent property */ + if (!msi_dn) + msi_dn = pcie->dn; + + if (pci_msi_enabled() && msi_dn == pcie->dn) { + ret = brcm_pcie_enable_msi(pcie); + if (ret) + dev_err(pcie->dev, + "probe of internal MSI failed: %d)", ret); + else + pcie->msi_internal = true; + } + bridge->dev.parent = &pdev->dev; bridge->busnr = 0; bridge->ops = &brcm_pcie_ops; @@ -944,7 +1274,6 @@ static int brcm_pcie_probe(struct platform_device *pdev) pcie->root_bus = bridge->bus; return 0; - fail: _brcm_pcie_remove(pcie); return ret;