diff mbox series

[v4,1/6] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks

Message ID 0e0eeeee546a3bb664935184d66866f1c66458ce.1573252696.git.leonard.crestez@nxp.com (mailing list archive)
State Superseded
Headers show
Series PM / devfreq: Add dynamic scaling for imx8m ddr controller | expand

Commit Message

Leonard Crestez Nov. 8, 2019, 10:39 p.m. UTC 
These clocks are only modified as part of DRAM frequency switches during
which DRAM itself is briefly inaccessible. The switch is performed with
a SMC call to by TF-A which runs from a SRAM area; upon returning to
linux several clocks bits are modified and we need to update them.

For rate bits an easy solution is to just mark with
CLK_GET_RATE_NOCACHE so that new rates are always read back from
registers.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/clk/imx/clk-imx8mm.c | 11 +++++++++--
 drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++--
 drivers/clk/imx/clk-imx8mq.c | 15 +++++++++++----
 3 files changed, 30 insertions(+), 8 deletions(-)

Comments

Abel Vesa Nov. 12, 2019, 11:18 a.m. UTC | #1 
On 19-11-09 00:39:51, Leonard Crestez wrote:
> These clocks are only modified as part of DRAM frequency switches during
> which DRAM itself is briefly inaccessible. The switch is performed with
> a SMC call to by TF-A which runs from a SRAM area; upon returning to
> linux several clocks bits are modified and we need to update them.
> 
> For rate bits an easy solution is to just mark with
> CLK_GET_RATE_NOCACHE so that new rates are always read back from
> registers.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---
>  drivers/clk/imx/clk-imx8mm.c | 11 +++++++++--
>  drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++--
>  drivers/clk/imx/clk-imx8mq.c | 15 +++++++++++----
>  3 files changed, 30 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
> index 030b15d7c0ce..c58f988191a5 100644
> --- a/drivers/clk/imx/clk-imx8mm.c
> +++ b/drivers/clk/imx/clk-imx8mm.c
> @@ -440,13 +440,20 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
>  
>  	/* IPG */
>  	clks[IMX8MM_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
>  	clks[IMX8MM_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
>  
> +	/*
> +	 * DRAM clocks are manipulated from TF-A outside clock framework.
> +	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
> +	 */
> +	clks[IMX8MM_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000,
> +			CLK_GET_RATE_NOCACHE);
> +	clks[IMX8MM_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mm_dram_apb_sels, base + 0xa080,
> +			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
> +
>  	/* IP */
> -	clks[IMX8MM_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000);
> -	clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
>  	clks[IMX8MM_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mm_vpu_g1_sels, base + 0xa100);
>  	clks[IMX8MM_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mm_vpu_g2_sels, base + 0xa180);
>  	clks[IMX8MM_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mm_disp_dtrc_sels, base + 0xa200);
>  	clks[IMX8MM_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mm_disp_dc8000_sels, base + 0xa280);
>  	clks[IMX8MM_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mm_pcie1_ctrl_sels, base + 0xa300);
> diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
> index 9f5a5a56b45e..ca78cb1249a7 100644
> --- a/drivers/clk/imx/clk-imx8mn.c
> +++ b/drivers/clk/imx/clk-imx8mn.c
> @@ -428,12 +428,20 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
>  	clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
>  	clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
>  	clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
>  	clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
>  	clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
> -	clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
> -	clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
> +
> +	/*
> +	 * DRAM clocks are manipulated from TF-A outside clock framework.
> +	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
> +	 */
> +	clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000,
> +			CLK_GET_RATE_NOCACHE);
> +	clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080,
> +			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);

nitpick: I think it looks better if we stick to one line each clock. 
I know it's against the 80 chars rule, but at least is consistent.

> +
>  	clks[IMX8MN_CLK_DISP_PIXEL] = imx8m_clk_composite("disp_pixel", imx8mn_disp_pixel_sels, base + 0xa500);
>  	clks[IMX8MN_CLK_SAI2] = imx8m_clk_composite("sai2", imx8mn_sai2_sels, base + 0xa600);
>  	clks[IMX8MN_CLK_SAI3] = imx8m_clk_composite("sai3", imx8mn_sai3_sels, base + 0xa680);
>  	clks[IMX8MN_CLK_SAI5] = imx8m_clk_composite("sai5", imx8mn_sai5_sels, base + 0xa780);
>  	clks[IMX8MN_CLK_SAI6] = imx8m_clk_composite("sai6", imx8mn_sai6_sels, base + 0xa800);
> diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
> index 5f10a606d836..3e2ccc17dc66 100644
> --- a/drivers/clk/imx/clk-imx8mq.c
> +++ b/drivers/clk/imx/clk-imx8mq.c
> @@ -341,11 +341,12 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
>  	clks[IMX8MQ_VIDEO_PLL1_OUT] = imx_clk_gate("video_pll1_out", "video_pll1_bypass", base + 0x10, 21);
>  
>  	clks[IMX8MQ_SYS1_PLL_OUT] = imx_clk_fixed("sys1_pll_out", 800000000);
>  	clks[IMX8MQ_SYS2_PLL_OUT] = imx_clk_fixed("sys2_pll_out", 1000000000);
>  	clks[IMX8MQ_SYS3_PLL_OUT] = imx_clk_sccg_pll("sys3_pll_out", sys3_pll_out_sels, ARRAY_SIZE(sys3_pll_out_sels), 0, 0, 0, base + 0x48, CLK_IS_CRITICAL);
> -	clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60, CLK_IS_CRITICAL);
> +	clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60,
> +			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
>  	clks[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_sccg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
>  
>  	/* SYS PLL1 fixed output */
>  	clks[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
>  	clks[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
> @@ -433,15 +434,21 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
>  
>  	/* IPG */
>  	clks[IMX8MQ_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
>  	clks[IMX8MQ_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
>  
> -	/* IP */
> +	/*
> +	 * DRAM clocks are manipulated from TF-A outside clock framework.
> +	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
> +	 */
>  	clks[IMX8MQ_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
> +	clks[IMX8MQ_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000,
> +			CLK_GET_RATE_NOCACHE);
> +	clks[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080,
> +			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
>  
> -	clks[IMX8MQ_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000);
> -	clks[IMX8MQ_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mq_dram_apb_sels, base + 0xa080);
> +	/* IP */
>  	clks[IMX8MQ_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
>  	clks[IMX8MQ_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mq_vpu_g2_sels, base + 0xa180);
>  	clks[IMX8MQ_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mq_disp_dtrc_sels, base + 0xa200);
>  	clks[IMX8MQ_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mq_disp_dc8000_sels, base + 0xa280);
>  	clks[IMX8MQ_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mq_pcie1_ctrl_sels, base + 0xa300);
> -- 
> 2.17.1
>
Leonard Crestez Nov. 12, 2019, 1:43 p.m. UTC | #2 
On 12.11.2019 13:18, Abel Vesa wrote:
> On 19-11-09 00:39:51, Leonard Crestez wrote:
>> These clocks are only modified as part of DRAM frequency switches during
>> which DRAM itself is briefly inaccessible. The switch is performed with
>> a SMC call to by TF-A which runs from a SRAM area; upon returning to
>> linux several clocks bits are modified and we need to update them.
>>
>> For rate bits an easy solution is to just mark with
>> CLK_GET_RATE_NOCACHE so that new rates are always read back from
>> registers.
>>
>> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
>> ---
>>   drivers/clk/imx/clk-imx8mm.c | 11 +++++++++--
>>   drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++--
>>   drivers/clk/imx/clk-imx8mq.c | 15 +++++++++++----
>>   3 files changed, 30 insertions(+), 8 deletions(-)

>> --- a/drivers/clk/imx/clk-imx8mn.c
>> +++ b/drivers/clk/imx/clk-imx8mn.c
>> @@ -428,12 +428,20 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
>>   	clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
>>   	clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
>>   	clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
>>   	clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
>>   	clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
>> -	clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
>> -	clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
>> +
>> +	/*
>> +	 * DRAM clocks are manipulated from TF-A outside clock framework.
>> +	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
>> +	 */
>> +	clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000,
>> +			CLK_GET_RATE_NOCACHE);
>> +	clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080,
>> +			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
> 
> nitpick: I think it looks better if we stick to one line each clock.
> I know it's against the 80 chars rule, but at least is consistent.

Yes, there are longer lines in the imx8m* files anyway.

If I fix this (in all instances) can I also add a "reviewed-by"?

--
Regards,
Leonard
Abel Vesa Nov. 12, 2019, 3:10 p.m. UTC | #3 
On 19-11-12 13:43:35, Leonard Crestez wrote:
> On 12.11.2019 13:18, Abel Vesa wrote:
> > On 19-11-09 00:39:51, Leonard Crestez wrote:
> >> These clocks are only modified as part of DRAM frequency switches during
> >> which DRAM itself is briefly inaccessible. The switch is performed with
> >> a SMC call to by TF-A which runs from a SRAM area; upon returning to
> >> linux several clocks bits are modified and we need to update them.
> >>
> >> For rate bits an easy solution is to just mark with
> >> CLK_GET_RATE_NOCACHE so that new rates are always read back from
> >> registers.
> >>
> >> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> >> ---
> >>   drivers/clk/imx/clk-imx8mm.c | 11 +++++++++--
> >>   drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++--
> >>   drivers/clk/imx/clk-imx8mq.c | 15 +++++++++++----
> >>   3 files changed, 30 insertions(+), 8 deletions(-)
> 
> >> --- a/drivers/clk/imx/clk-imx8mn.c
> >> +++ b/drivers/clk/imx/clk-imx8mn.c
> >> @@ -428,12 +428,20 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
> >>   	clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
> >>   	clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
> >>   	clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
> >>   	clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
> >>   	clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
> >> -	clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
> >> -	clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
> >> +
> >> +	/*
> >> +	 * DRAM clocks are manipulated from TF-A outside clock framework.
> >> +	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
> >> +	 */
> >> +	clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000,
> >> +			CLK_GET_RATE_NOCACHE);
> >> +	clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080,
> >> +			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
> > 
> > nitpick: I think it looks better if we stick to one line each clock.
> > I know it's against the 80 chars rule, but at least is consistent.
> 
> Yes, there are longer lines in the imx8m* files anyway.
> 
> If I fix this (in all instances) can I also add a "reviewed-by"?
> 

Sorry, I forgot to add the line.

For all the clock related changes:

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>

> --
> Regards,
> Leonard
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 030b15d7c0ce..c58f988191a5 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -440,13 +440,20 @@  static int imx8mm_clocks_probe(struct platform_device *pdev)
 
 	/* IPG */
 	clks[IMX8MM_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
 	clks[IMX8MM_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
 
+	/*
+	 * DRAM clocks are manipulated from TF-A outside clock framework.
+	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
+	 */
+	clks[IMX8MM_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000,
+			CLK_GET_RATE_NOCACHE);
+	clks[IMX8MM_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mm_dram_apb_sels, base + 0xa080,
+			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
 	/* IP */
-	clks[IMX8MM_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000);
-	clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
 	clks[IMX8MM_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mm_vpu_g1_sels, base + 0xa100);
 	clks[IMX8MM_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mm_vpu_g2_sels, base + 0xa180);
 	clks[IMX8MM_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mm_disp_dtrc_sels, base + 0xa200);
 	clks[IMX8MM_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mm_disp_dc8000_sels, base + 0xa280);
 	clks[IMX8MM_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mm_pcie1_ctrl_sels, base + 0xa300);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 9f5a5a56b45e..ca78cb1249a7 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -428,12 +428,20 @@  static int imx8mn_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
 	clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
 	clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
 	clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
 	clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
-	clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
-	clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
+
+	/*
+	 * DRAM clocks are manipulated from TF-A outside clock framework.
+	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
+	 */
+	clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000,
+			CLK_GET_RATE_NOCACHE);
+	clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080,
+			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
 	clks[IMX8MN_CLK_DISP_PIXEL] = imx8m_clk_composite("disp_pixel", imx8mn_disp_pixel_sels, base + 0xa500);
 	clks[IMX8MN_CLK_SAI2] = imx8m_clk_composite("sai2", imx8mn_sai2_sels, base + 0xa600);
 	clks[IMX8MN_CLK_SAI3] = imx8m_clk_composite("sai3", imx8mn_sai3_sels, base + 0xa680);
 	clks[IMX8MN_CLK_SAI5] = imx8m_clk_composite("sai5", imx8mn_sai5_sels, base + 0xa780);
 	clks[IMX8MN_CLK_SAI6] = imx8m_clk_composite("sai6", imx8mn_sai6_sels, base + 0xa800);
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 5f10a606d836..3e2ccc17dc66 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -341,11 +341,12 @@  static int imx8mq_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MQ_VIDEO_PLL1_OUT] = imx_clk_gate("video_pll1_out", "video_pll1_bypass", base + 0x10, 21);
 
 	clks[IMX8MQ_SYS1_PLL_OUT] = imx_clk_fixed("sys1_pll_out", 800000000);
 	clks[IMX8MQ_SYS2_PLL_OUT] = imx_clk_fixed("sys2_pll_out", 1000000000);
 	clks[IMX8MQ_SYS3_PLL_OUT] = imx_clk_sccg_pll("sys3_pll_out", sys3_pll_out_sels, ARRAY_SIZE(sys3_pll_out_sels), 0, 0, 0, base + 0x48, CLK_IS_CRITICAL);
-	clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60, CLK_IS_CRITICAL);
+	clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60,
+			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
 	clks[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_sccg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
 
 	/* SYS PLL1 fixed output */
 	clks[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
 	clks[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
@@ -433,15 +434,21 @@  static int imx8mq_clocks_probe(struct platform_device *pdev)
 
 	/* IPG */
 	clks[IMX8MQ_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
 	clks[IMX8MQ_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
 
-	/* IP */
+	/*
+	 * DRAM clocks are manipulated from TF-A outside clock framework.
+	 * Mark with GET_RATE_NOCACHE to always read div value from hardware
+	 */
 	clks[IMX8MQ_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
+	clks[IMX8MQ_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000,
+			CLK_GET_RATE_NOCACHE);
+	clks[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080,
+			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
 
-	clks[IMX8MQ_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000);
-	clks[IMX8MQ_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mq_dram_apb_sels, base + 0xa080);
+	/* IP */
 	clks[IMX8MQ_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
 	clks[IMX8MQ_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mq_vpu_g2_sels, base + 0xa180);
 	clks[IMX8MQ_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mq_disp_dtrc_sels, base + 0xa200);
 	clks[IMX8MQ_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mq_disp_dc8000_sels, base + 0xa280);
 	clks[IMX8MQ_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mq_pcie1_ctrl_sels, base + 0xa300);