| Message ID | 20191106234712.2380-1-jeffrey.l.hugo@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ath10k: Handle "invalid" BDFs for msm8998 devices | expand |
On Wed, Nov 06, 2019 at 03:47:12PM -0800, Jeffrey Hugo wrote: > When the BDF download QMI message has the end field set to 1, it signals > the end of the transfer, and triggers the firmware to do a CRC check. The > BDFs for msm8998 devices fail this check, yet the firmware is happy to > still use the BDF. It appears that this error is not caught by the > downstream drive by concidence, therefore there are production devices > in the field where this issue needs to be handled otherwise we cannot > support wifi on them. So, attempt to detect this scenario as best we can > and treat it as non-fatal. > > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> > --- > drivers/net/wireless/ath/ath10k/qmi.c | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c > index eb618a2652db..5ff8cfc93778 100644 > --- a/drivers/net/wireless/ath/ath10k/qmi.c > +++ b/drivers/net/wireless/ath/ath10k/qmi.c > @@ -265,10 +265,13 @@ static int ath10k_qmi_bdf_dnld_send_sync(struct ath10k_qmi *qmi) > goto out; > > if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { > - ath10k_err(ar, "failed to download board data file: %d\n", > - resp.resp.error); > - ret = -EINVAL; > - goto out; > + if (!(req->end == 1 && > + resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { Would it make sense to combine the inner and outer condition, something like this (completely untested) ? if (resp.resp.result != QMI_RESULT_SUCCESS_V01 && !(req->end == 1 && resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { > + ath10k_err(ar, "failed to download board data file: %d\n", > + resp.resp.error); > + ret = -EINVAL; > + goto out; > + } > } > > remaining -= req->data_len; > -- > 2.17.1 >
On Tue, Nov 12, 2019 at 2:04 AM Simon Horman <simon.horman@netronome.com> wrote: > > On Wed, Nov 06, 2019 at 03:47:12PM -0800, Jeffrey Hugo wrote: > > When the BDF download QMI message has the end field set to 1, it signals > > the end of the transfer, and triggers the firmware to do a CRC check. The > > BDFs for msm8998 devices fail this check, yet the firmware is happy to > > still use the BDF. It appears that this error is not caught by the > > downstream drive by concidence, therefore there are production devices > > in the field where this issue needs to be handled otherwise we cannot > > support wifi on them. So, attempt to detect this scenario as best we can > > and treat it as non-fatal. > > > > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> > > --- > > drivers/net/wireless/ath/ath10k/qmi.c | 11 +++++++---- > > 1 file changed, 7 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c > > index eb618a2652db..5ff8cfc93778 100644 > > --- a/drivers/net/wireless/ath/ath10k/qmi.c > > +++ b/drivers/net/wireless/ath/ath10k/qmi.c > > @@ -265,10 +265,13 @@ static int ath10k_qmi_bdf_dnld_send_sync(struct ath10k_qmi *qmi) > > goto out; > > > > if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { > > - ath10k_err(ar, "failed to download board data file: %d\n", > > - resp.resp.error); > > - ret = -EINVAL; > > - goto out; > > + if (!(req->end == 1 && > > + resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { > > Would it make sense to combine the inner and outer condition, > something like this (completely untested) ? I guess, make sense from what perspective? Looks like the assembly ends up being the same, so it would be down to "readability" which is subjective - I personally don't see a major advantage to one way or the other. It does look like Kalle already picked up this patch, so I'm guessing that if folks feel your suggestion is superior, then it would need to be a follow on. > > if (resp.resp.result != QMI_RESULT_SUCCESS_V01 && > !(req->end == 1 && > resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { > > > + ath10k_err(ar, "failed to download board data file: %d\n", > > + resp.resp.error); > > + ret = -EINVAL; > > + goto out; > > + } > > } > > > > remaining -= req->data_len; > > -- > > 2.17.1 > >
On Wed 06 Nov 15:47 PST 2019, Jeffrey Hugo wrote: > When the BDF download QMI message has the end field set to 1, it signals > the end of the transfer, and triggers the firmware to do a CRC check. The > BDFs for msm8998 devices fail this check, yet the firmware is happy to > still use the BDF. It appears that this error is not caught by the > downstream drive by concidence, therefore there are production devices > in the field where this issue needs to be handled otherwise we cannot > support wifi on them. So, attempt to detect this scenario as best we can > and treat it as non-fatal. > > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> > --- > drivers/net/wireless/ath/ath10k/qmi.c | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c > index eb618a2652db..5ff8cfc93778 100644 > --- a/drivers/net/wireless/ath/ath10k/qmi.c > +++ b/drivers/net/wireless/ath/ath10k/qmi.c > @@ -265,10 +265,13 @@ static int ath10k_qmi_bdf_dnld_send_sync(struct ath10k_qmi *qmi) > goto out; > > if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { > - ath10k_err(ar, "failed to download board data file: %d\n", > - resp.resp.error); > - ret = -EINVAL; > - goto out; > + if (!(req->end == 1 && > + resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { Perhaps worth adding a comment in the code as well, to describe what scenario this relates to? Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > + ath10k_err(ar, "failed to download board data file: %d\n", > + resp.resp.error); > + ret = -EINVAL; > + goto out; > + } > } > > remaining -= req->data_len; > -- > 2.17.1 >
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> writes: > On Tue, Nov 12, 2019 at 2:04 AM Simon Horman <simon.horman@netronome.com> wrote: >> >> On Wed, Nov 06, 2019 at 03:47:12PM -0800, Jeffrey Hugo wrote: >> > When the BDF download QMI message has the end field set to 1, it signals >> > the end of the transfer, and triggers the firmware to do a CRC check. The >> > BDFs for msm8998 devices fail this check, yet the firmware is happy to >> > still use the BDF. It appears that this error is not caught by the >> > downstream drive by concidence, therefore there are production devices >> > in the field where this issue needs to be handled otherwise we cannot >> > support wifi on them. So, attempt to detect this scenario as best we can >> > and treat it as non-fatal. >> > >> > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> >> > --- >> > drivers/net/wireless/ath/ath10k/qmi.c | 11 +++++++---- >> > 1 file changed, 7 insertions(+), 4 deletions(-) >> > >> > diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c >> > index eb618a2652db..5ff8cfc93778 100644 >> > --- a/drivers/net/wireless/ath/ath10k/qmi.c >> > +++ b/drivers/net/wireless/ath/ath10k/qmi.c >> > @@ -265,10 +265,13 @@ static int ath10k_qmi_bdf_dnld_send_sync(struct ath10k_qmi *qmi) >> > goto out; >> > >> > if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { >> > - ath10k_err(ar, "failed to download board data file: %d\n", >> > - resp.resp.error); >> > - ret = -EINVAL; >> > - goto out; >> > + if (!(req->end == 1 && >> > + resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { >> >> Would it make sense to combine the inner and outer condition, >> something like this (completely untested) ? > > I guess, make sense from what perspective? Looks like the assembly > ends up being the same, so it would be down to "readability" which is > subjective - I personally don't see a major advantage to one way or > the other. It does look like Kalle already picked up this patch, so > I'm guessing that if folks feel your suggestion is superior, then it > would need to be a follow on. Same here, it's only on the pending branch so changes are still possible.
On Wed, Nov 13, 2019 at 06:58:25AM +0200, Kalle Valo wrote: > Jeffrey Hugo <jeffrey.l.hugo@gmail.com> writes: > > > On Tue, Nov 12, 2019 at 2:04 AM Simon Horman <simon.horman@netronome.com> wrote: > >> > >> On Wed, Nov 06, 2019 at 03:47:12PM -0800, Jeffrey Hugo wrote: > >> > When the BDF download QMI message has the end field set to 1, it signals > >> > the end of the transfer, and triggers the firmware to do a CRC check. The > >> > BDFs for msm8998 devices fail this check, yet the firmware is happy to > >> > still use the BDF. It appears that this error is not caught by the > >> > downstream drive by concidence, therefore there are production devices > >> > in the field where this issue needs to be handled otherwise we cannot > >> > support wifi on them. So, attempt to detect this scenario as best we can > >> > and treat it as non-fatal. > >> > > >> > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> > >> > --- > >> > drivers/net/wireless/ath/ath10k/qmi.c | 11 +++++++---- > >> > 1 file changed, 7 insertions(+), 4 deletions(-) > >> > > >> > diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c > >> > index eb618a2652db..5ff8cfc93778 100644 > >> > --- a/drivers/net/wireless/ath/ath10k/qmi.c > >> > +++ b/drivers/net/wireless/ath/ath10k/qmi.c > >> > @@ -265,10 +265,13 @@ static int ath10k_qmi_bdf_dnld_send_sync(struct ath10k_qmi *qmi) > >> > goto out; > >> > > >> > if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { > >> > - ath10k_err(ar, "failed to download board data file: %d\n", > >> > - resp.resp.error); > >> > - ret = -EINVAL; > >> > - goto out; > >> > + if (!(req->end == 1 && > >> > + resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { > >> > >> Would it make sense to combine the inner and outer condition, > >> something like this (completely untested) ? > > > > I guess, make sense from what perspective? Looks like the assembly > > ends up being the same, so it would be down to "readability" which is > > subjective - I personally don't see a major advantage to one way or > > the other. It does look like Kalle already picked up this patch, so > > I'm guessing that if folks feel your suggestion is superior, then it > > would need to be a follow on. My feeling is that it would reduce the churn in the patch making the patch more readable and likewise improving the readability of the code. But I do agree this does not affect run-time and I am ambivalent about updating the patch if it has already been (semi-)accepted. > > Same here, it's only on the pending branch so changes are still > possible. > > -- > https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c index eb618a2652db..5ff8cfc93778 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.c +++ b/drivers/net/wireless/ath/ath10k/qmi.c @@ -265,10 +265,13 @@ static int ath10k_qmi_bdf_dnld_send_sync(struct ath10k_qmi *qmi) goto out; if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { - ath10k_err(ar, "failed to download board data file: %d\n", - resp.resp.error); - ret = -EINVAL; - goto out; + if (!(req->end == 1 && + resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) { + ath10k_err(ar, "failed to download board data file: %d\n", + resp.resp.error); + ret = -EINVAL; + goto out; + } } remaining -= req->data_len;
When the BDF download QMI message has the end field set to 1, it signals the end of the transfer, and triggers the firmware to do a CRC check. The BDFs for msm8998 devices fail this check, yet the firmware is happy to still use the BDF. It appears that this error is not caught by the downstream drive by concidence, therefore there are production devices in the field where this issue needs to be handled otherwise we cannot support wifi on them. So, attempt to detect this scenario as best we can and treat it as non-fatal. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> --- drivers/net/wireless/ath/ath10k/qmi.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)