| Message ID | 20191115123931.18919-1-masneyb@onstation.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | bb9b9cde0fe009f8cb3862abaafa96302ab4e486 |
| Headers | show |
| Series | clk: qcom: mmcc8974: move gfx3d_clk_src from the mmcc to rpm | expand |
On Fri 15 Nov 04:39 PST 2019, Brian Masney wrote: > gfx3d_clk_src for msm8974 was introduced into the MMCC by > commit d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia > clock controller (MMCC)") to ensure that all of the clocks for > this platform are documented upstream. This clock actually belongs > on the RPM. Since then, commit 685dc94b7d8f ("clk: qcom: smd-rpmcc: > Add msm8974 clocks") was introduced, which contains the proper > definition for gfx3d_clk_src. Let's drop the definition from the > mmcc and register the clock with the rpm instead. > > This change was tested on a Nexus 5 (hammerhead) phone. > > Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > drivers/clk/qcom/clk-smd-rpm.c | 2 ++ > drivers/clk/qcom/mmcc-msm8974.c | 13 ------------- > 2 files changed, 2 insertions(+), 13 deletions(-) > > diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c > index 60aae7543608..2db31dbe47e9 100644 > --- a/drivers/clk/qcom/clk-smd-rpm.c > +++ b/drivers/clk/qcom/clk-smd-rpm.c > @@ -486,6 +486,8 @@ static struct clk_smd_rpm *msm8974_clks[] = { > [RPM_SMD_MMSSNOC_AHB_CLK] = &msm8974_mmssnoc_ahb_clk, > [RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8974_mmssnoc_ahb_a_clk, > [RPM_SMD_BIMC_CLK] = &msm8974_bimc_clk, > + [RPM_SMD_GFX3D_CLK_SRC] = &msm8974_gfx3d_clk_src, > + [RPM_SMD_GFX3D_A_CLK_SRC] = &msm8974_gfx3d_a_clk_src, > [RPM_SMD_BIMC_A_CLK] = &msm8974_bimc_a_clk, > [RPM_SMD_OCMEMGX_CLK] = &msm8974_ocmemgx_clk, > [RPM_SMD_OCMEMGX_A_CLK] = &msm8974_ocmemgx_a_clk, > diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c > index bcb0a397ef91..015426262d08 100644 > --- a/drivers/clk/qcom/mmcc-msm8974.c > +++ b/drivers/clk/qcom/mmcc-msm8974.c > @@ -452,18 +452,6 @@ static struct clk_rcg2 mdp_clk_src = { > }, > }; > > -static struct clk_rcg2 gfx3d_clk_src = { > - .cmd_rcgr = 0x4000, > - .hid_width = 5, > - .parent_map = mmcc_xo_mmpll0_1_2_gpll0_map, > - .clkr.hw.init = &(struct clk_init_data){ > - .name = "gfx3d_clk_src", > - .parent_names = mmcc_xo_mmpll0_1_2_gpll0, > - .num_parents = 5, > - .ops = &clk_rcg2_ops, > - }, > -}; > - > static struct freq_tbl ftbl_camss_jpeg_jpeg0_2_clk[] = { > F(75000000, P_GPLL0, 8, 0, 0), > F(133330000, P_GPLL0, 4.5, 0, 0), > @@ -2411,7 +2399,6 @@ static struct clk_regmap *mmcc_msm8974_clocks[] = { > [VFE0_CLK_SRC] = &vfe0_clk_src.clkr, > [VFE1_CLK_SRC] = &vfe1_clk_src.clkr, > [MDP_CLK_SRC] = &mdp_clk_src.clkr, > - [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr, > [JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr, > [JPEG1_CLK_SRC] = &jpeg1_clk_src.clkr, > [JPEG2_CLK_SRC] = &jpeg2_clk_src.clkr, > -- > 2.21.0 >
On Fri, Nov 15, 2019 at 07:39:31AM -0500, Brian Masney wrote: > gfx3d_clk_src for msm8974 was introduced into the MMCC by > commit d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia > clock controller (MMCC)") to ensure that all of the clocks for > this platform are documented upstream. This clock actually belongs > on the RPM. Since then, commit 685dc94b7d8f ("clk: qcom: smd-rpmcc: > Add msm8974 clocks") was introduced, which contains the proper > definition for gfx3d_clk_src. Let's drop the definition from the > mmcc and register the clock with the rpm instead. > > This change was tested on a Nexus 5 (hammerhead) phone. > > Signed-off-by: Brian Masney <masneyb@onstation.org> > --- > drivers/clk/qcom/clk-smd-rpm.c | 2 ++ > drivers/clk/qcom/mmcc-msm8974.c | 13 ------------- > 2 files changed, 2 insertions(+), 13 deletions(-) > > diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c > index 60aae7543608..2db31dbe47e9 100644 > --- a/drivers/clk/qcom/clk-smd-rpm.c > +++ b/drivers/clk/qcom/clk-smd-rpm.c > @@ -486,6 +486,8 @@ static struct clk_smd_rpm *msm8974_clks[] = { > [RPM_SMD_MMSSNOC_AHB_CLK] = &msm8974_mmssnoc_ahb_clk, > [RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8974_mmssnoc_ahb_a_clk, > [RPM_SMD_BIMC_CLK] = &msm8974_bimc_clk, > + [RPM_SMD_GFX3D_CLK_SRC] = &msm8974_gfx3d_clk_src, > + [RPM_SMD_GFX3D_A_CLK_SRC] = &msm8974_gfx3d_a_clk_src, > [RPM_SMD_BIMC_A_CLK] = &msm8974_bimc_a_clk, > [RPM_SMD_OCMEMGX_CLK] = &msm8974_ocmemgx_clk, > [RPM_SMD_OCMEMGX_A_CLK] = &msm8974_ocmemgx_a_clk, > diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c > index bcb0a397ef91..015426262d08 100644 > --- a/drivers/clk/qcom/mmcc-msm8974.c > +++ b/drivers/clk/qcom/mmcc-msm8974.c > @@ -452,18 +452,6 @@ static struct clk_rcg2 mdp_clk_src = { > }, > }; > > -static struct clk_rcg2 gfx3d_clk_src = { > - .cmd_rcgr = 0x4000, > - .hid_width = 5, > - .parent_map = mmcc_xo_mmpll0_1_2_gpll0_map, > - .clkr.hw.init = &(struct clk_init_data){ > - .name = "gfx3d_clk_src", > - .parent_names = mmcc_xo_mmpll0_1_2_gpll0, > - .num_parents = 5, > - .ops = &clk_rcg2_ops, > - }, > -}; > - > static struct freq_tbl ftbl_camss_jpeg_jpeg0_2_clk[] = { > F(75000000, P_GPLL0, 8, 0, 0), > F(133330000, P_GPLL0, 4.5, 0, 0), > @@ -2411,7 +2399,6 @@ static struct clk_regmap *mmcc_msm8974_clocks[] = { > [VFE0_CLK_SRC] = &vfe0_clk_src.clkr, > [VFE1_CLK_SRC] = &vfe1_clk_src.clkr, > [MDP_CLK_SRC] = &mdp_clk_src.clkr, > - [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr, > [JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr, > [JPEG1_CLK_SRC] = &jpeg1_clk_src.clkr, > [JPEG2_CLK_SRC] = &jpeg2_clk_src.clkr, I just realized that I also need to remove the GFX3D_CLK_SRC #define from include/dt-bindings/clock/qcom,mmcc-msm8974.h. I'll send out a v2 tomorrow evening. Brian
Quoting Brian Masney (2019-11-16 10:54:57) > > diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c > > index bcb0a397ef91..015426262d08 100644 > > --- a/drivers/clk/qcom/mmcc-msm8974.c > > +++ b/drivers/clk/qcom/mmcc-msm8974.c > > @@ -2411,7 +2399,6 @@ static struct clk_regmap *mmcc_msm8974_clocks[] = { > > [VFE0_CLK_SRC] = &vfe0_clk_src.clkr, > > [VFE1_CLK_SRC] = &vfe1_clk_src.clkr, > > [MDP_CLK_SRC] = &mdp_clk_src.clkr, > > - [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr, > > [JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr, > > [JPEG1_CLK_SRC] = &jpeg1_clk_src.clkr, > > [JPEG2_CLK_SRC] = &jpeg2_clk_src.clkr, > > I just realized that I also need to remove the GFX3D_CLK_SRC #define > from include/dt-bindings/clock/qcom,mmcc-msm8974.h. I'll send out a v2 > tomorrow evening. > Please don't change the binding. In reality the define will never be used but also in reality the clk exists, so it's fine to leave it in the binding.
On Sat, Nov 16, 2019 at 05:27:36PM -0800, Stephen Boyd wrote: > Quoting Brian Masney (2019-11-16 10:54:57) > > > diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c > > > index bcb0a397ef91..015426262d08 100644 > > > --- a/drivers/clk/qcom/mmcc-msm8974.c > > > +++ b/drivers/clk/qcom/mmcc-msm8974.c > > > @@ -2411,7 +2399,6 @@ static struct clk_regmap *mmcc_msm8974_clocks[] = { > > > [VFE0_CLK_SRC] = &vfe0_clk_src.clkr, > > > [VFE1_CLK_SRC] = &vfe1_clk_src.clkr, > > > [MDP_CLK_SRC] = &mdp_clk_src.clkr, > > > - [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr, > > > [JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr, > > > [JPEG1_CLK_SRC] = &jpeg1_clk_src.clkr, > > > [JPEG2_CLK_SRC] = &jpeg2_clk_src.clkr, > > > > I just realized that I also need to remove the GFX3D_CLK_SRC #define > > from include/dt-bindings/clock/qcom,mmcc-msm8974.h. I'll send out a v2 > > tomorrow evening. > > > > Please don't change the binding. In reality the define will never be > used but also in reality the clk exists, so it's fine to leave it in the > binding. OK, that makes sense. Thanks for your help on this. Brian
Quoting Brian Masney (2019-11-15 04:39:31) > gfx3d_clk_src for msm8974 was introduced into the MMCC by > commit d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia > clock controller (MMCC)") to ensure that all of the clocks for > this platform are documented upstream. This clock actually belongs > on the RPM. Since then, commit 685dc94b7d8f ("clk: qcom: smd-rpmcc: > Add msm8974 clocks") was introduced, which contains the proper > definition for gfx3d_clk_src. Let's drop the definition from the > mmcc and register the clock with the rpm instead. > > This change was tested on a Nexus 5 (hammerhead) phone. > > Signed-off-by: Brian Masney <masneyb@onstation.org> > --- Applied to clk-next
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index 60aae7543608..2db31dbe47e9 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -486,6 +486,8 @@ static struct clk_smd_rpm *msm8974_clks[] = { [RPM_SMD_MMSSNOC_AHB_CLK] = &msm8974_mmssnoc_ahb_clk, [RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8974_mmssnoc_ahb_a_clk, [RPM_SMD_BIMC_CLK] = &msm8974_bimc_clk, + [RPM_SMD_GFX3D_CLK_SRC] = &msm8974_gfx3d_clk_src, + [RPM_SMD_GFX3D_A_CLK_SRC] = &msm8974_gfx3d_a_clk_src, [RPM_SMD_BIMC_A_CLK] = &msm8974_bimc_a_clk, [RPM_SMD_OCMEMGX_CLK] = &msm8974_ocmemgx_clk, [RPM_SMD_OCMEMGX_A_CLK] = &msm8974_ocmemgx_a_clk, diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c index bcb0a397ef91..015426262d08 100644 --- a/drivers/clk/qcom/mmcc-msm8974.c +++ b/drivers/clk/qcom/mmcc-msm8974.c @@ -452,18 +452,6 @@ static struct clk_rcg2 mdp_clk_src = { }, }; -static struct clk_rcg2 gfx3d_clk_src = { - .cmd_rcgr = 0x4000, - .hid_width = 5, - .parent_map = mmcc_xo_mmpll0_1_2_gpll0_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gfx3d_clk_src", - .parent_names = mmcc_xo_mmpll0_1_2_gpll0, - .num_parents = 5, - .ops = &clk_rcg2_ops, - }, -}; - static struct freq_tbl ftbl_camss_jpeg_jpeg0_2_clk[] = { F(75000000, P_GPLL0, 8, 0, 0), F(133330000, P_GPLL0, 4.5, 0, 0), @@ -2411,7 +2399,6 @@ static struct clk_regmap *mmcc_msm8974_clocks[] = { [VFE0_CLK_SRC] = &vfe0_clk_src.clkr, [VFE1_CLK_SRC] = &vfe1_clk_src.clkr, [MDP_CLK_SRC] = &mdp_clk_src.clkr, - [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr, [JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr, [JPEG1_CLK_SRC] = &jpeg1_clk_src.clkr, [JPEG2_CLK_SRC] = &jpeg2_clk_src.clkr,
gfx3d_clk_src for msm8974 was introduced into the MMCC by commit d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)") to ensure that all of the clocks for this platform are documented upstream. This clock actually belongs on the RPM. Since then, commit 685dc94b7d8f ("clk: qcom: smd-rpmcc: Add msm8974 clocks") was introduced, which contains the proper definition for gfx3d_clk_src. Let's drop the definition from the mmcc and register the clock with the rpm instead. This change was tested on a Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> --- drivers/clk/qcom/clk-smd-rpm.c | 2 ++ drivers/clk/qcom/mmcc-msm8974.c | 13 ------------- 2 files changed, 2 insertions(+), 13 deletions(-)