| Message ID | 20191117175606.5050-5-mohammad.rasim96@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | add support for videostrong KII Pro | expand |
On 17/11/2019 18:56, Mohammad Rasim wrote: > This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo) > > hciconfig output: > ``` > hci1: Type: Primary Bus: UART > BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 > UP RUNNING > RX bytes:5079 acl:0 sco:0 events:567 errors:0 > TX bytes:69065 acl:0 sco:0 commands:567 errors:0 > Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH SNIFF > Link mode: SLAVE ACCEPT > Name: 'alarm' > Class: 0x000000 > Service Classes: Unspecified > Device Class: Miscellaneous, > HCI Version: 4.0 (0x6) Revision: 0x161 > LMP Version: 4.0 (0x6) Subversion: 0x4106 > Manufacturer: Broadcom Corporation (15) > ``` > > Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> > --- > drivers/bluetooth/btbcm.c | 1 + > drivers/bluetooth/hci_bcm.c | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c > index 2d2e6d862068..22464bf8cda3 100644 > --- a/drivers/bluetooth/btbcm.c > +++ b/drivers/bluetooth/btbcm.c > @@ -339,6 +339,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = { > { 0x220e, "BCM20702A1" }, /* 001.002.014 */ > { 0x4217, "BCM4329B1" }, /* 002.002.023 */ > { 0x6106, "BCM4359C0" }, /* 003.001.006 */ > + { 0x4106, "BCM4335A0" }, /* 002.001.006 */ Ack for this one > { } > }; > > diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c > index 7646636f2d18..7eba10b0ae6c 100644 > --- a/drivers/bluetooth/hci_bcm.c > +++ b/drivers/bluetooth/hci_bcm.c > @@ -1422,6 +1422,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = { > { .compatible = "brcm,bcm4345c5" }, > { .compatible = "brcm,bcm4330-bt" }, > { .compatible = "brcm,bcm43438-bt" }, > + { .compatible = "brcm,bcm4335a0" }, This could be omitted if the I/F is the same as "brcm,bcm43438-bt". > { }, > }; > MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match); > Neil
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index 2d2e6d862068..22464bf8cda3 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -339,6 +339,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = { { 0x220e, "BCM20702A1" }, /* 001.002.014 */ { 0x4217, "BCM4329B1" }, /* 002.002.023 */ { 0x6106, "BCM4359C0" }, /* 003.001.006 */ + { 0x4106, "BCM4335A0" }, /* 002.001.006 */ { } }; diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 7646636f2d18..7eba10b0ae6c 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -1422,6 +1422,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = { { .compatible = "brcm,bcm4345c5" }, { .compatible = "brcm,bcm4330-bt" }, { .compatible = "brcm,bcm43438-bt" }, + { .compatible = "brcm,bcm4335a0" }, { }, }; MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo) hciconfig output: ``` hci1: Type: Primary Bus: UART BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:5079 acl:0 sco:0 events:567 errors:0 TX bytes:69065 acl:0 sco:0 commands:567 errors:0 Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'alarm' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x161 LMP Version: 4.0 (0x6) Subversion: 0x4106 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> --- drivers/bluetooth/btbcm.c | 1 + drivers/bluetooth/hci_bcm.c | 1 + 2 files changed, 2 insertions(+)