| Message ID | 20191119154621.55341-2-niklas.cassel@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for QCOM Core Power Reduction | expand |
On Tue 19 Nov 07:46 PST 2019, Niklas Cassel wrote: > Add DT bindings to describe the CPR HW found on certain Qualcomm SoCs. > > Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> > Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > Changes since v5: > -None > > .../bindings/power/avs/qcom,cpr.txt | 130 ++++++++++++++++++ > 1 file changed, 130 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > > diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > new file mode 100644 > index 000000000000..ab0d5ebbad4e > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > @@ -0,0 +1,130 @@ > +QCOM CPR (Core Power Reduction) > + > +CPR (Core Power Reduction) is a technology to reduce core power on a CPU > +or other device. Each OPP of a device corresponds to a "corner" that has > +a range of valid voltages for a particular frequency. While the device is > +running at a particular frequency, CPR monitors dynamic factors such as > +temperature, etc. and suggests adjustments to the voltage to save power > +and meet silicon characteristic requirements. > + > +- compatible: > + Usage: required > + Value type: <string> > + Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404 > + > +- reg: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: base address and size of the rbcpr register region > + > +- interrupts: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: should specify the CPR interrupt > + > +- clocks: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: phandle to the reference clock > + > +- clock-names: > + Usage: required > + Value type: <stringlist> > + Definition: must be "ref" > + > +- vdd-apc-supply: > + Usage: required > + Value type: <phandle> > + Definition: phandle to the vdd-apc-supply regulator > + > +- #power-domain-cells: > + Usage: required > + Value type: <u32> > + Definition: should be 0 > + > +- operating-points-v2: > + Usage: required > + Value type: <phandle> > + Definition: A phandle to the OPP table containing the > + performance states supported by the CPR > + power domain > + > +- acc-syscon: > + Usage: optional > + Value type: <phandle> > + Definition: phandle to syscon for writing ACC settings > + > +- nvmem-cells: > + Usage: required > + Value type: <phandle> > + Definition: phandle to nvmem cells containing the data > + that makes up a fuse corner, for each fuse corner. > + As well as the CPR fuse revision. > + > +- nvmem-cell-names: > + Usage: required > + Value type: <stringlist> > + Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2", > + "cpr_quotient_offset3", "cpr_init_voltage1", > + "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1", > + "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1", > + "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision" > + for qcs404. > + > +Example: > + > + cpr_opp_table: cpr-opp-table { > + compatible = "operating-points-v2-qcom-level"; > + > + cpr_opp1: opp1 { > + opp-level = <1>; > + qcom,opp-fuse-level = <1>; > + }; > + cpr_opp2: opp2 { > + opp-level = <2>; > + qcom,opp-fuse-level = <2>; > + }; > + cpr_opp3: opp3 { > + opp-level = <3>; > + qcom,opp-fuse-level = <3>; > + }; > + }; > + > + power-controller@b018000 { > + compatible = "qcom,qcs404-cpr", "qcom,cpr"; > + reg = <0x0b018000 0x1000>; > + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; > + clocks = <&xo_board>; > + clock-names = "ref"; > + vdd-apc-supply = <&pms405_s3>; > + #power-domain-cells = <0>; > + operating-points-v2 = <&cpr_opp_table>; > + acc-syscon = <&tcsr>; > + > + nvmem-cells = <&cpr_efuse_quot_offset1>, > + <&cpr_efuse_quot_offset2>, > + <&cpr_efuse_quot_offset3>, > + <&cpr_efuse_init_voltage1>, > + <&cpr_efuse_init_voltage2>, > + <&cpr_efuse_init_voltage3>, > + <&cpr_efuse_quot1>, > + <&cpr_efuse_quot2>, > + <&cpr_efuse_quot3>, > + <&cpr_efuse_ring1>, > + <&cpr_efuse_ring2>, > + <&cpr_efuse_ring3>, > + <&cpr_efuse_revision>; > + nvmem-cell-names = "cpr_quotient_offset1", > + "cpr_quotient_offset2", > + "cpr_quotient_offset3", > + "cpr_init_voltage1", > + "cpr_init_voltage2", > + "cpr_init_voltage3", > + "cpr_quotient1", > + "cpr_quotient2", > + "cpr_quotient3", > + "cpr_ring_osc1", > + "cpr_ring_osc2", > + "cpr_ring_osc3", > + "cpr_fuse_revision"; > + }; > -- > 2.23.0 >
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt new file mode 100644 index 000000000000..ab0d5ebbad4e --- /dev/null +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt @@ -0,0 +1,130 @@ +QCOM CPR (Core Power Reduction) + +CPR (Core Power Reduction) is a technology to reduce core power on a CPU +or other device. Each OPP of a device corresponds to a "corner" that has +a range of valid voltages for a particular frequency. While the device is +running at a particular frequency, CPR monitors dynamic factors such as +temperature, etc. and suggests adjustments to the voltage to save power +and meet silicon characteristic requirements. + +- compatible: + Usage: required + Value type: <string> + Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404 + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: base address and size of the rbcpr register region + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the CPR interrupt + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: phandle to the reference clock + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "ref" + +- vdd-apc-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the vdd-apc-supply regulator + +- #power-domain-cells: + Usage: required + Value type: <u32> + Definition: should be 0 + +- operating-points-v2: + Usage: required + Value type: <phandle> + Definition: A phandle to the OPP table containing the + performance states supported by the CPR + power domain + +- acc-syscon: + Usage: optional + Value type: <phandle> + Definition: phandle to syscon for writing ACC settings + +- nvmem-cells: + Usage: required + Value type: <phandle> + Definition: phandle to nvmem cells containing the data + that makes up a fuse corner, for each fuse corner. + As well as the CPR fuse revision. + +- nvmem-cell-names: + Usage: required + Value type: <stringlist> + Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2", + "cpr_quotient_offset3", "cpr_init_voltage1", + "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1", + "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1", + "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision" + for qcs404. + +Example: + + cpr_opp_table: cpr-opp-table { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + + power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; + };