| Message ID | 20191125161210.8275-1-robin@protonic.nl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q | expand |
On Mon, Nov 25, 2019 at 05:12:10PM +0100, Robin van der Gracht wrote: > The first generation i.MX6 processors does not send an interrupt when the > power key is pressed. It sends a power down request interrupt if the key is > released before a hard shutdown (5 second press). This should allow > software to bring down the SoC safely. > > For this driver to work as a regular power key with the older SoCs, we need > to send a keypress AND release when we get the power down request irq. > > Signed-off-by: Robin van der Gracht <robin@protonic.nl> Applied, thank you. > --- > > Changes v3 -> v4: > * The key release irq handler is now emitting the press and release > events directly, instead of the debounce timer handler. > > drivers/input/keyboard/Kconfig | 2 +- > drivers/input/keyboard/snvs_pwrkey.c | 28 +++++++++++++++++++++++++--- > 2 files changed, 26 insertions(+), 4 deletions(-) > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index 7c4f19dab34f..937e58da5ce1 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY > depends on OF > help > This is the snvs powerkey driver for the Freescale i.MX application > - processors that are newer than i.MX6 SX. > + processors. > > To compile this driver as a module, choose M here; the > module will be called snvs_pwrkey. > diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c > index 5342d8d45f81..4888e137cc5d 100644 > --- a/drivers/input/keyboard/snvs_pwrkey.c > +++ b/drivers/input/keyboard/snvs_pwrkey.c > @@ -19,6 +19,7 @@ > #include <linux/mfd/syscon.h> > #include <linux/regmap.h> > > +#define SNVS_HPVIDR1_REG 0xF8 > #define SNVS_LPSR_REG 0x4C /* LP Status Register */ > #define SNVS_LPCR_REG 0x38 /* LP Control Register */ > #define SNVS_HPSR_REG 0x14 > @@ -37,6 +38,7 @@ struct pwrkey_drv_data { > int wakeup; > struct timer_list check_timer; > struct input_dev *input; > + u8 minor_rev; > }; > > static void imx_imx_snvs_check_for_events(struct timer_list *t) > @@ -67,13 +69,29 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id) > { > struct platform_device *pdev = dev_id; > struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); > + struct input_dev *input = pdata->input; > u32 lp_status; > > - pm_wakeup_event(pdata->input->dev.parent, 0); > + pm_wakeup_event(input->dev.parent, 0); > > regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status); > - if (lp_status & SNVS_LPSR_SPO) > - mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME)); > + if (lp_status & SNVS_LPSR_SPO) { > + if (pdata->minor_rev == 0) { > + /* > + * The first generation i.MX6 SoCs only sends an > + * interrupt on button release. To mimic power-key > + * usage, we'll prepend a press event. > + */ > + input_report_key(input, pdata->keycode, 1); > + input_sync(input); > + input_report_key(input, pdata->keycode, 0); > + input_sync(input); > + pm_relax(input->dev.parent); > + } else { > + mod_timer(&pdata->check_timer, > + jiffies + msecs_to_jiffies(DEBOUNCE_TIME)); > + } > + } > > /* clear SPO status */ > regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO); > @@ -94,6 +112,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) > struct input_dev *input = NULL; > struct device_node *np; > int error; > + u32 vid; > > /* Get SNVS register Page */ > np = pdev->dev.of_node; > @@ -123,6 +142,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) > return -EINVAL; > } > > + regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid); > + pdata->minor_rev = vid & 0xff; > + > regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN); > > /* clear the unexpected interrupt before driver ready */ > -- > 2.20.1 >
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 7c4f19dab34f..937e58da5ce1 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY depends on OF help This is the snvs powerkey driver for the Freescale i.MX application - processors that are newer than i.MX6 SX. + processors. To compile this driver as a module, choose M here; the module will be called snvs_pwrkey. diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c index 5342d8d45f81..4888e137cc5d 100644 --- a/drivers/input/keyboard/snvs_pwrkey.c +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -19,6 +19,7 @@ #include <linux/mfd/syscon.h> #include <linux/regmap.h> +#define SNVS_HPVIDR1_REG 0xF8 #define SNVS_LPSR_REG 0x4C /* LP Status Register */ #define SNVS_LPCR_REG 0x38 /* LP Control Register */ #define SNVS_HPSR_REG 0x14 @@ -37,6 +38,7 @@ struct pwrkey_drv_data { int wakeup; struct timer_list check_timer; struct input_dev *input; + u8 minor_rev; }; static void imx_imx_snvs_check_for_events(struct timer_list *t) @@ -67,13 +69,29 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id) { struct platform_device *pdev = dev_id; struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); + struct input_dev *input = pdata->input; u32 lp_status; - pm_wakeup_event(pdata->input->dev.parent, 0); + pm_wakeup_event(input->dev.parent, 0); regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status); - if (lp_status & SNVS_LPSR_SPO) - mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME)); + if (lp_status & SNVS_LPSR_SPO) { + if (pdata->minor_rev == 0) { + /* + * The first generation i.MX6 SoCs only sends an + * interrupt on button release. To mimic power-key + * usage, we'll prepend a press event. + */ + input_report_key(input, pdata->keycode, 1); + input_sync(input); + input_report_key(input, pdata->keycode, 0); + input_sync(input); + pm_relax(input->dev.parent); + } else { + mod_timer(&pdata->check_timer, + jiffies + msecs_to_jiffies(DEBOUNCE_TIME)); + } + } /* clear SPO status */ regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO); @@ -94,6 +112,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) struct input_dev *input = NULL; struct device_node *np; int error; + u32 vid; /* Get SNVS register Page */ np = pdev->dev.of_node; @@ -123,6 +142,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) return -EINVAL; } + regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid); + pdata->minor_rev = vid & 0xff; + regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN); /* clear the unexpected interrupt before driver ready */
The first generation i.MX6 processors does not send an interrupt when the power key is pressed. It sends a power down request interrupt if the key is released before a hard shutdown (5 second press). This should allow software to bring down the SoC safely. For this driver to work as a regular power key with the older SoCs, we need to send a keypress AND release when we get the power down request irq. Signed-off-by: Robin van der Gracht <robin@protonic.nl> --- Changes v3 -> v4: * The key release irq handler is now emitting the press and release events directly, instead of the debounce timer handler. drivers/input/keyboard/Kconfig | 2 +- drivers/input/keyboard/snvs_pwrkey.c | 28 +++++++++++++++++++++++++--- 2 files changed, 26 insertions(+), 4 deletions(-)