| Message ID | 20191119231912.12768-6-mike.leach@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | CoreSight CTI Driver | expand |
On Tue, Nov 19, 2019 at 11:19:03PM +0000, Mike Leach wrote: > Adds new coresight-cti.yaml file describing the bindings required to define > CTI in the device trees. > > Adds an include file to dt-bindings/arm to define constants describing > common signal functionality used in CoreSight and generic usage. > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > --- > .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ > .../devicetree/bindings/arm/coresight.txt | 7 + > MAINTAINERS | 2 + > include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ > 4 files changed, 349 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml > create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h > > diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > new file mode 100644 > index 000000000000..882c72f1c798 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > @@ -0,0 +1,303 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright 2019 Linaro Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ARM Coresight Cross Trigger Interface (CTI) device. > + > +description: | > + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected > + to one or more CoreSight components and/or a CPU, with CTIs interconnected in > + a star topology via the CTM (which is not programmable). The ECT components > + are not part of the trace generation data path and are thus not part of the > + CoreSight graph described in the general CoreSight bindings file > + coresight.txt. > + > + The CTI component properties define the connections between the individual > + CTI and the components it is directly connected to, consisting of input and > + output hardware trigger signals. CTIs can have a maximum number of input and > + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The > + number is defined at design time, the maximum of each defined in the DEVID > + register. > + > + CTIs are interconnected in a star topology via the CTM, using a number of > + programmable channels usually 4, but again implementation defined and > + described in the DEVID register. The star topology is not required to be > + described in the bindings as the actual connections are software > + programmable. > + > + In general the connections between CTI and components via the trigger signals > + are implementation defined, other than when v8 core and ETM is present. > + The v8 architecture defines the required signal connections between CPU core > + and CTI, and ETM and CTI, if the ETM if present. > + > + When only minimal information is available for the CTI trigger connections, > + then a minimal driver binding can be declare with no explicit trigger > + signals. This will result in the using the DEVID register to set the > + input and output triggers and channels in use. Any user / client > + application will require additional information on the connections > + between the CTI and other components for correct operation. This minimal > + binding may be used when using the Integration Control registers to > + discover connections between CTI and other CoreSight components, > + > + Certain triggers between CoreSight devices and the CTI have specific types > + and usages. These can be defined along with the signal indexes with the > + constants defined in <dt-bindings/arm/coresight-cti-dt.h> > + > + For example a CTI connected to a core will usually have a DBGREQ signal. This > + is defined in the binding as type PE_EDBGREQ. These types will appear in an > + optional array alongside the signal indexes. Omitting types will default all > + signals to GEN_IO. > + > + Note that some hardware trigger signals can be connected to non-CoreSight > + components (e.g. UART etc) depending on hardware implementation. > + > +maintainers: > + - Mike Leach <mike.leach@linaro.org> > + > +allOf: > + - $ref: /schemas/arm/primecell.yaml# > + > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > +select: > + properties: > + compatible: > + contains: > + enum: > + - arm,coresight-cti > + required: > + - compatible > + > +properties: > + $nodename: > + pattern: "^cti(@[0-9a-f,]+)*$" > + compatible: > + items: > + - const: arm,coresight-cti > + - const: arm,primecell > + > + reg: > + items: > + - description: device programming registers > + > + arm,cti-v8-arch: > + type: boolean > + description: > + This CTI follows the v8 architecturally mandated layout for a CTI. > + Bindings declaring this must declare a cpu, and optionally a single > + arm,cs-dev-assoc may be present to define an attached ETM. No additional > + trig-conns nodes are permitted. The driver will build a connection model > + according to architectural requirements. This will include a filter on > + the CPU dbgreq signal as described above. > + > + cpu: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle > + description: Handle to cpu this device is associated with. > + > + arm,cti-ctm-id: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Defines the CTM this CTI is connected to, in large systems with multiple > + separate CTI/CTM nets. Typically multi-socket systems where the CTM is > + propagated between sockets. > + > + arm,cs-dev-assoc: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle > + description: > + defines a phandle reference to an associated CoreSight trace device. > + When the associated trace device is enabled, then the respective CTI > + will be enabled. Use in a trig-conns node, or in CTI base node when > + arm,cti-v8-arch present. If the associated device has not been registered > + then the node name will be stored as the connection name for later > + resolution. If the associated device is not a CoreSight device or not > + registered then the node name will remain the connection name and > + automatic enabling will not occur. > + > +patternProperties: > + '^trig_conns@[0-9]+$': > + type: object > + description: > + A trigger connections child node which describes the trigger signals > + between this CTI and another hardware device. This device may be a CPU, > + CoreSight device, any other hardware device or simple external IO lines. > + The connection may have both input and output triggers, or only one or the > + other. > + > + properties: > + > + arm,trig-in-sigs: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger in signal numbers in use by a trig-conns node. > + > + arm,trig-in-types: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of constants representing the types for the CTI trigger in > + signals. Types in this array match to the corresponding signal in the > + arm,trig-in-sigs array. If the -types array is smaller, or omitted > + completely, then the types will default to GEN_IO. > + > + arm,trig-out-sigs: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger out signal numbers in use by a trig-conns node. > + > + arm,trig-out-types: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of constants representing the types for the CTI trigger out > + signals. Types in this array match to the corresponding signal > + in the arm,trig-out-sigs array. If the "-types" array is smaller, > + or omitted completely, then the types will default to GEN_IO. > + > + arm,trig-filters: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger out signals that will be blocked from becoming > + active, unless filtering is disabled on the driver. > + > + arm,trig-conn-name: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/string > + description: > + Defines a connection name that will be displayed, if the cpu or > + arm,cs-dev-assoc properties are not being used in this connection. > + Principle use for CTI that are connected to non-CoreSight devices, or > + external IO. > + > + anyOf: > + - required: > + - arm,trig-in-sigs > + - required: > + - arm,trig-out-sigs > + oneOf: > + - required: > + - arm,trig-conn-name > + - required: > + - cpu > + - required: > + - arm,cs-dev-assoc > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + > +examples: > + # minimum CTI definition. DEVID register used to set number of triggers. > + - | > + cti@20020000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0x20020000 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + }; > + # v8 architecturally defined CTI - CPU + ETM connections generated by the > + # driver according to the v8 architecture specification. > + - | > + cti@859000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0x859000 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + > + arm,cti-v8-arch; > + cpu = <&CPU1>; > + arm,cs-dev-assoc = <&etm1>; > + }; > + # Implementation defined CTI - CPU + ETM connections explicitly defined.. > + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h > + - | > + #include <dt-bindings/arm/coresight-cti-dt.h> > + > + cti@858000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0x858000 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + > + arm,cti-ctm-id = <1>; > + > + trig-conns@0 { > + arm,trig-in-sigs = <4 5 6 7>; > + arm,trig-in-types = <ETM_EXTOUT > + ETM_EXTOUT > + ETM_EXTOUT > + ETM_EXTOUT>; > + arm,trig-out-sigs = <4 5 6 7>; > + arm,trig-out-types = <ETM_EXTIN > + ETM_EXTIN > + ETM_EXTIN > + ETM_EXTIN>; > + arm,cs-dev-assoc = <&etm0>; > + }; > + > + trig-conns@1 { > + cpu = <&CPU0>; > + arm,trig-in-sigs = <0 1>; > + arm,trig-in-types = <PE_DBGTRIGGER > + PE_PMUIRQ>; > + arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-types = <PE_EDBGREQ > + PE_DBGRESTART > + PE_CTIIRQ>; > + > + arm,trig-filters = <0>; > + }; > + }; > + # Implementation defined CTI - none CoreSight component connections. > + - | > + cti@20110000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0 0x20110000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + > + trig-conns@0 { > + arm,trig-in-sigs=<0>; > + arm,trig-in-types=<GEN_INTREQ>; > + arm,trig-out-sigs=<0>; > + arm,trig-out-types=<GEN_HALTREQ>; > + arm,trig-conn-name = "sys_profiler"; > + }; > + > + trig-conns@1 { > + arm,trig-out-sigs=<2 3>; > + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-conn-name = "watchdog"; > + }; > + > + trig-conns@2 { > + arm,trig-in-sigs=<1 6>; > + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-conn-name = "g_counter"; > + }; > + }; > + > +... I'm not sure what the "..." is there for. It is not present in the example schema[1] but I can find the patter in other .yaml files. As such I will let Rob decide on that part. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> [1]. Documentation/devicetree/bindings/example-schema.yaml > \ No newline at end of file > diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt > index d02c42d21f2f..846f6daae71b 100644 > --- a/Documentation/devicetree/bindings/arm/coresight.txt > +++ b/Documentation/devicetree/bindings/arm/coresight.txt > @@ -45,6 +45,10 @@ its hardware characteristcs. > - Coresight Address Translation Unit (CATU) > "arm,coresight-catu", "arm,primecell"; > > + - Coresight Cross Trigger Interface (CTI): > + "arm,coresight-cti", "arm,primecell"; > + See coresight-cti.yaml for full CTI definitions. > + > * reg: physical base address and length of the register > set(s) of the component. > > @@ -72,6 +76,9 @@ its hardware characteristcs. > * reg-names: the only acceptable values are "stm-base" and > "stm-stimulus-base", each corresponding to the areas defined in "reg". > > +* Required properties for Coresight Cross Trigger Interface (CTI) > + See coresight-cti.yaml for full CTI definitions. > + > * Required properties for devices that don't show up on the AMBA bus, such as > non-configurable replicators and non-configurable funnels: > > diff --git a/MAINTAINERS b/MAINTAINERS > index 9de89d75dbcc..8d01a74068f7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1608,9 +1608,11 @@ R: Suzuki K Poulose <suzuki.poulose@arm.com> > L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) > S: Maintained > F: drivers/hwtracing/coresight/* > +F: include/dt-bindings/arm/coresight-cti-dt.h > F: Documentation/trace/coresight/* > F: Documentation/devicetree/bindings/arm/coresight.txt > F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt > +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml > F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* > F: tools/perf/arch/arm/util/pmu.c > F: tools/perf/arch/arm/util/auxtrace.c > diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h > new file mode 100644 > index 000000000000..61e7bdf8ea6e > --- /dev/null > +++ b/include/dt-bindings/arm/coresight-cti-dt.h > @@ -0,0 +1,37 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * This header provides constants for the defined trigger signal > + * types on CoreSight CTI. > + */ > + > +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > + > +#define GEN_IO 0 > +#define GEN_INTREQ 1 > +#define GEN_INTACK 2 > +#define GEN_HALTREQ 3 > +#define GEN_RESTARTREQ 4 > +#define PE_EDBGREQ 5 > +#define PE_DBGRESTART 6 > +#define PE_CTIIRQ 7 > +#define PE_PMUIRQ 8 > +#define PE_DBGTRIGGER 9 > +#define ETM_EXTOUT 10 > +#define ETM_EXTIN 11 > +#define SNK_FULL 12 > +#define SNK_ACQCOMP 13 > +#define SNK_FLUSHCOMP 14 > +#define SNK_FLUSHIN 15 > +#define SNK_TRIGIN 16 > +#define STM_ASYNCOUT 17 > +#define STM_TOUT_SPTE 18 > +#define STM_TOUT_SW 19 > +#define STM_TOUT_HETE 20 > +#define STM_HWEVENT 21 > +#define ELA_TSTART 22 > +#define ELA_TSTOP 23 > +#define ELA_DBGREQ 24 > +#define CTI_TRIG_MAX 25 > + > +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ > -- > 2.17.1 >
Hi Mathieu, ... is an optional end of document marker in YAML. Seemed to appear in most of the files I looked at in the devicetree.org dt-schema project I looked at so I took it as customary for DT YAML docs. But as you say - it's up to Rob etc. to approve or otherwise. Regards Mike On Wed, 20 Nov 2019 at 19:06, Mathieu Poirier <mathieu.poirier@linaro.org> wrote: > > On Tue, Nov 19, 2019 at 11:19:03PM +0000, Mike Leach wrote: > > Adds new coresight-cti.yaml file describing the bindings required to define > > CTI in the device trees. > > > > Adds an include file to dt-bindings/arm to define constants describing > > common signal functionality used in CoreSight and generic usage. > > > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > > --- > > .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ > > .../devicetree/bindings/arm/coresight.txt | 7 + > > MAINTAINERS | 2 + > > include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ > > 4 files changed, 349 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml > > create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h > > > > diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > > new file mode 100644 > > index 000000000000..882c72f1c798 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > > @@ -0,0 +1,303 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +# Copyright 2019 Linaro Ltd. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ARM Coresight Cross Trigger Interface (CTI) device. > > + > > +description: | > > + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected > > + to one or more CoreSight components and/or a CPU, with CTIs interconnected in > > + a star topology via the CTM (which is not programmable). The ECT components > > + are not part of the trace generation data path and are thus not part of the > > + CoreSight graph described in the general CoreSight bindings file > > + coresight.txt. > > + > > + The CTI component properties define the connections between the individual > > + CTI and the components it is directly connected to, consisting of input and > > + output hardware trigger signals. CTIs can have a maximum number of input and > > + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The > > + number is defined at design time, the maximum of each defined in the DEVID > > + register. > > + > > + CTIs are interconnected in a star topology via the CTM, using a number of > > + programmable channels usually 4, but again implementation defined and > > + described in the DEVID register. The star topology is not required to be > > + described in the bindings as the actual connections are software > > + programmable. > > + > > + In general the connections between CTI and components via the trigger signals > > + are implementation defined, other than when v8 core and ETM is present. > > + The v8 architecture defines the required signal connections between CPU core > > + and CTI, and ETM and CTI, if the ETM if present. > > + > > + When only minimal information is available for the CTI trigger connections, > > + then a minimal driver binding can be declare with no explicit trigger > > + signals. This will result in the using the DEVID register to set the > > + input and output triggers and channels in use. Any user / client > > + application will require additional information on the connections > > + between the CTI and other components for correct operation. This minimal > > + binding may be used when using the Integration Control registers to > > + discover connections between CTI and other CoreSight components, > > + > > + Certain triggers between CoreSight devices and the CTI have specific types > > + and usages. These can be defined along with the signal indexes with the > > + constants defined in <dt-bindings/arm/coresight-cti-dt.h> > > + > > + For example a CTI connected to a core will usually have a DBGREQ signal. This > > + is defined in the binding as type PE_EDBGREQ. These types will appear in an > > + optional array alongside the signal indexes. Omitting types will default all > > + signals to GEN_IO. > > + > > + Note that some hardware trigger signals can be connected to non-CoreSight > > + components (e.g. UART etc) depending on hardware implementation. > > + > > +maintainers: > > + - Mike Leach <mike.leach@linaro.org> > > + > > +allOf: > > + - $ref: /schemas/arm/primecell.yaml# > > + > > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > > +select: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - arm,coresight-cti > > + required: > > + - compatible > > + > > +properties: > > + $nodename: > > + pattern: "^cti(@[0-9a-f,]+)*$" > > + compatible: > > + items: > > + - const: arm,coresight-cti > > + - const: arm,primecell > > + > > + reg: > > + items: > > + - description: device programming registers > > + > > + arm,cti-v8-arch: > > + type: boolean > > + description: > > + This CTI follows the v8 architecturally mandated layout for a CTI. > > + Bindings declaring this must declare a cpu, and optionally a single > > + arm,cs-dev-assoc may be present to define an attached ETM. No additional > > + trig-conns nodes are permitted. The driver will build a connection model > > + according to architectural requirements. This will include a filter on > > + the CPU dbgreq signal as described above. > > + > > + cpu: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/phandle > > + description: Handle to cpu this device is associated with. > > + > > + arm,cti-ctm-id: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + Defines the CTM this CTI is connected to, in large systems with multiple > > + separate CTI/CTM nets. Typically multi-socket systems where the CTM is > > + propagated between sockets. > > + > > + arm,cs-dev-assoc: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + defines a phandle reference to an associated CoreSight trace device. > > + When the associated trace device is enabled, then the respective CTI > > + will be enabled. Use in a trig-conns node, or in CTI base node when > > + arm,cti-v8-arch present. If the associated device has not been registered > > + then the node name will be stored as the connection name for later > > + resolution. If the associated device is not a CoreSight device or not > > + registered then the node name will remain the connection name and > > + automatic enabling will not occur. > > + > > +patternProperties: > > + '^trig_conns@[0-9]+$': > > + type: object > > + description: > > + A trigger connections child node which describes the trigger signals > > + between this CTI and another hardware device. This device may be a CPU, > > + CoreSight device, any other hardware device or simple external IO lines. > > + The connection may have both input and output triggers, or only one or the > > + other. > > + > > + properties: > > + > > + arm,trig-in-sigs: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger in signal numbers in use by a trig-conns node. > > + > > + arm,trig-in-types: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of constants representing the types for the CTI trigger in > > + signals. Types in this array match to the corresponding signal in the > > + arm,trig-in-sigs array. If the -types array is smaller, or omitted > > + completely, then the types will default to GEN_IO. > > + > > + arm,trig-out-sigs: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger out signal numbers in use by a trig-conns node. > > + > > + arm,trig-out-types: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of constants representing the types for the CTI trigger out > > + signals. Types in this array match to the corresponding signal > > + in the arm,trig-out-sigs array. If the "-types" array is smaller, > > + or omitted completely, then the types will default to GEN_IO. > > + > > + arm,trig-filters: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger out signals that will be blocked from becoming > > + active, unless filtering is disabled on the driver. > > + > > + arm,trig-conn-name: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/string > > + description: > > + Defines a connection name that will be displayed, if the cpu or > > + arm,cs-dev-assoc properties are not being used in this connection. > > + Principle use for CTI that are connected to non-CoreSight devices, or > > + external IO. > > + > > + anyOf: > > + - required: > > + - arm,trig-in-sigs > > + - required: > > + - arm,trig-out-sigs > > + oneOf: > > + - required: > > + - arm,trig-conn-name > > + - required: > > + - cpu > > + - required: > > + - arm,cs-dev-assoc > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + > > +examples: > > + # minimum CTI definition. DEVID register used to set number of triggers. > > + - | > > + cti@20020000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x20020000 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + }; > > + # v8 architecturally defined CTI - CPU + ETM connections generated by the > > + # driver according to the v8 architecture specification. > > + - | > > + cti@859000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x859000 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + > > + arm,cti-v8-arch; > > + cpu = <&CPU1>; > > + arm,cs-dev-assoc = <&etm1>; > > + }; > > + # Implementation defined CTI - CPU + ETM connections explicitly defined.. > > + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h > > + - | > > + #include <dt-bindings/arm/coresight-cti-dt.h> > > + > > + cti@858000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x858000 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + > > + arm,cti-ctm-id = <1>; > > + > > + trig-conns@0 { > > + arm,trig-in-sigs = <4 5 6 7>; > > + arm,trig-in-types = <ETM_EXTOUT > > + ETM_EXTOUT > > + ETM_EXTOUT > > + ETM_EXTOUT>; > > + arm,trig-out-sigs = <4 5 6 7>; > > + arm,trig-out-types = <ETM_EXTIN > > + ETM_EXTIN > > + ETM_EXTIN > > + ETM_EXTIN>; > > + arm,cs-dev-assoc = <&etm0>; > > + }; > > + > > + trig-conns@1 { > > + cpu = <&CPU0>; > > + arm,trig-in-sigs = <0 1>; > > + arm,trig-in-types = <PE_DBGTRIGGER > > + PE_PMUIRQ>; > > + arm,trig-out-sigs=<0 1 2 >; > > + arm,trig-out-types = <PE_EDBGREQ > > + PE_DBGRESTART > > + PE_CTIIRQ>; > > + > > + arm,trig-filters = <0>; > > + }; > > + }; > > + # Implementation defined CTI - none CoreSight component connections. > > + - | > > + cti@20110000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0 0x20110000 0 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + > > + trig-conns@0 { > > + arm,trig-in-sigs=<0>; > > + arm,trig-in-types=<GEN_INTREQ>; > > + arm,trig-out-sigs=<0>; > > + arm,trig-out-types=<GEN_HALTREQ>; > > + arm,trig-conn-name = "sys_profiler"; > > + }; > > + > > + trig-conns@1 { > > + arm,trig-out-sigs=<2 3>; > > + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > > + arm,trig-conn-name = "watchdog"; > > + }; > > + > > + trig-conns@2 { > > + arm,trig-in-sigs=<1 6>; > > + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > > + arm,trig-conn-name = "g_counter"; > > + }; > > + }; > > + > > +... > > I'm not sure what the "..." is there for. It is not present in the example > schema[1] but I can find the patter in other .yaml files. As such I will let > Rob decide on that part. > > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > > [1]. Documentation/devicetree/bindings/example-schema.yaml > > > \ No newline at end of file > > diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt > > index d02c42d21f2f..846f6daae71b 100644 > > --- a/Documentation/devicetree/bindings/arm/coresight.txt > > +++ b/Documentation/devicetree/bindings/arm/coresight.txt > > @@ -45,6 +45,10 @@ its hardware characteristcs. > > - Coresight Address Translation Unit (CATU) > > "arm,coresight-catu", "arm,primecell"; > > > > + - Coresight Cross Trigger Interface (CTI): > > + "arm,coresight-cti", "arm,primecell"; > > + See coresight-cti.yaml for full CTI definitions. > > + > > * reg: physical base address and length of the register > > set(s) of the component. > > > > @@ -72,6 +76,9 @@ its hardware characteristcs. > > * reg-names: the only acceptable values are "stm-base" and > > "stm-stimulus-base", each corresponding to the areas defined in "reg". > > > > +* Required properties for Coresight Cross Trigger Interface (CTI) > > + See coresight-cti.yaml for full CTI definitions. > > + > > * Required properties for devices that don't show up on the AMBA bus, such as > > non-configurable replicators and non-configurable funnels: > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 9de89d75dbcc..8d01a74068f7 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -1608,9 +1608,11 @@ R: Suzuki K Poulose <suzuki.poulose@arm.com> > > L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) > > S: Maintained > > F: drivers/hwtracing/coresight/* > > +F: include/dt-bindings/arm/coresight-cti-dt.h > > F: Documentation/trace/coresight/* > > F: Documentation/devicetree/bindings/arm/coresight.txt > > F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt > > +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml > > F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* > > F: tools/perf/arch/arm/util/pmu.c > > F: tools/perf/arch/arm/util/auxtrace.c > > diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h > > new file mode 100644 > > index 000000000000..61e7bdf8ea6e > > --- /dev/null > > +++ b/include/dt-bindings/arm/coresight-cti-dt.h > > @@ -0,0 +1,37 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * This header provides constants for the defined trigger signal > > + * types on CoreSight CTI. > > + */ > > + > > +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > > +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > > + > > +#define GEN_IO 0 > > +#define GEN_INTREQ 1 > > +#define GEN_INTACK 2 > > +#define GEN_HALTREQ 3 > > +#define GEN_RESTARTREQ 4 > > +#define PE_EDBGREQ 5 > > +#define PE_DBGRESTART 6 > > +#define PE_CTIIRQ 7 > > +#define PE_PMUIRQ 8 > > +#define PE_DBGTRIGGER 9 > > +#define ETM_EXTOUT 10 > > +#define ETM_EXTIN 11 > > +#define SNK_FULL 12 > > +#define SNK_ACQCOMP 13 > > +#define SNK_FLUSHCOMP 14 > > +#define SNK_FLUSHIN 15 > > +#define SNK_TRIGIN 16 > > +#define STM_ASYNCOUT 17 > > +#define STM_TOUT_SPTE 18 > > +#define STM_TOUT_SW 19 > > +#define STM_TOUT_HETE 20 > > +#define STM_HWEVENT 21 > > +#define ELA_TSTART 22 > > +#define ELA_TSTOP 23 > > +#define ELA_DBGREQ 24 > > +#define CTI_TRIG_MAX 25 > > + > > +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ > > -- > > 2.17.1 > >
On Tue, Nov 19, 2019 at 11:19:03PM +0000, Mike Leach wrote: > Adds new coresight-cti.yaml file describing the bindings required to define > CTI in the device trees. > > Adds an include file to dt-bindings/arm to define constants describing > common signal functionality used in CoreSight and generic usage. > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > --- > .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ > .../devicetree/bindings/arm/coresight.txt | 7 + > MAINTAINERS | 2 + > include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ > 4 files changed, 349 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml > create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h > > diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > new file mode 100644 > index 000000000000..882c72f1c798 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > @@ -0,0 +1,303 @@ > +# SPDX-License-Identifier: GPL-2.0 Dual license new bindings please: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright 2019 Linaro Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ARM Coresight Cross Trigger Interface (CTI) device. > + > +description: | > + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected > + to one or more CoreSight components and/or a CPU, with CTIs interconnected in > + a star topology via the CTM (which is not programmable). The ECT components > + are not part of the trace generation data path and are thus not part of the > + CoreSight graph described in the general CoreSight bindings file > + coresight.txt. > + > + The CTI component properties define the connections between the individual > + CTI and the components it is directly connected to, consisting of input and > + output hardware trigger signals. CTIs can have a maximum number of input and > + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The > + number is defined at design time, the maximum of each defined in the DEVID > + register. > + > + CTIs are interconnected in a star topology via the CTM, using a number of > + programmable channels usually 4, but again implementation defined and > + described in the DEVID register. The star topology is not required to be > + described in the bindings as the actual connections are software > + programmable. > + > + In general the connections between CTI and components via the trigger signals > + are implementation defined, other than when v8 core and ETM is present. > + The v8 architecture defines the required signal connections between CPU core > + and CTI, and ETM and CTI, if the ETM if present. > + > + When only minimal information is available for the CTI trigger connections, > + then a minimal driver binding can be declare with no explicit trigger > + signals. This will result in the using the DEVID register to set the > + input and output triggers and channels in use. Any user / client > + application will require additional information on the connections > + between the CTI and other components for correct operation. This minimal > + binding may be used when using the Integration Control registers to > + discover connections between CTI and other CoreSight components, > + > + Certain triggers between CoreSight devices and the CTI have specific types > + and usages. These can be defined along with the signal indexes with the > + constants defined in <dt-bindings/arm/coresight-cti-dt.h> > + > + For example a CTI connected to a core will usually have a DBGREQ signal. This > + is defined in the binding as type PE_EDBGREQ. These types will appear in an > + optional array alongside the signal indexes. Omitting types will default all > + signals to GEN_IO. > + > + Note that some hardware trigger signals can be connected to non-CoreSight > + components (e.g. UART etc) depending on hardware implementation. > + > +maintainers: > + - Mike Leach <mike.leach@linaro.org> > + > +allOf: > + - $ref: /schemas/arm/primecell.yaml# > + > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > +select: > + properties: > + compatible: > + contains: > + enum: > + - arm,coresight-cti > + required: > + - compatible > + > +properties: > + $nodename: > + pattern: "^cti(@[0-9a-f,]+)*$" Unit address should not be optional nor have a comma. > + compatible: > + items: > + - const: arm,coresight-cti > + - const: arm,primecell > + > + reg: > + items: > + - description: device programming registers Just "maxItems: 1" is sufficient. > + > + arm,cti-v8-arch: > + type: boolean > + description: > + This CTI follows the v8 architecturally mandated layout for a CTI. Seems like the compatible or primecell ID registers should be used for something like this. > + Bindings declaring this must declare a cpu, and optionally a single > + arm,cs-dev-assoc may be present to define an attached ETM. No additional > + trig-conns nodes are permitted. The driver will build a connection model > + according to architectural requirements. This will include a filter on > + the CPU dbgreq signal as described above. > + > + cpu: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle > + description: Handle to cpu this device is associated with. > + > + arm,cti-ctm-id: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Defines the CTM this CTI is connected to, in large systems with multiple > + separate CTI/CTM nets. Typically multi-socket systems where the CTM is > + propagated between sockets. > + > + arm,cs-dev-assoc: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle > + description: > + defines a phandle reference to an associated CoreSight trace device. s/defines/Defines/ > + When the associated trace device is enabled, then the respective CTI > + will be enabled. Use in a trig-conns node, or in CTI base node when > + arm,cti-v8-arch present. If the associated device has not been registered > + then the node name will be stored as the connection name for later > + resolution. If the associated device is not a CoreSight device or not > + registered then the node name will remain the connection name and > + automatic enabling will not occur. > + > +patternProperties: > + '^trig_conns@[0-9]+$': trig-conns@... > + type: object > + description: > + A trigger connections child node which describes the trigger signals > + between this CTI and another hardware device. This device may be a CPU, > + CoreSight device, any other hardware device or simple external IO lines. > + The connection may have both input and output triggers, or only one or the > + other. > + > + properties: > + > + arm,trig-in-sigs: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger in signal numbers in use by a trig-conns node. > + > + arm,trig-in-types: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of constants representing the types for the CTI trigger in > + signals. Types in this array match to the corresponding signal in the > + arm,trig-in-sigs array. If the -types array is smaller, or omitted > + completely, then the types will default to GEN_IO. > + > + arm,trig-out-sigs: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger out signal numbers in use by a trig-conns node. > + > + arm,trig-out-types: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of constants representing the types for the CTI trigger out > + signals. Types in this array match to the corresponding signal > + in the arm,trig-out-sigs array. If the "-types" array is smaller, > + or omitted completely, then the types will default to GEN_IO. > + > + arm,trig-filters: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger out signals that will be blocked from becoming > + active, unless filtering is disabled on the driver. > + > + arm,trig-conn-name: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/string > + description: > + Defines a connection name that will be displayed, if the cpu or > + arm,cs-dev-assoc properties are not being used in this connection. > + Principle use for CTI that are connected to non-CoreSight devices, or > + external IO. > + > + anyOf: > + - required: > + - arm,trig-in-sigs > + - required: > + - arm,trig-out-sigs > + oneOf: > + - required: > + - arm,trig-conn-name > + - required: > + - cpu > + - required: > + - arm,cs-dev-assoc > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + > +examples: > + # minimum CTI definition. DEVID register used to set number of triggers. > + - | > + cti@20020000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0x20020000 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + }; > + # v8 architecturally defined CTI - CPU + ETM connections generated by the > + # driver according to the v8 architecture specification. > + - | > + cti@859000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0x859000 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + > + arm,cti-v8-arch; > + cpu = <&CPU1>; > + arm,cs-dev-assoc = <&etm1>; > + }; > + # Implementation defined CTI - CPU + ETM connections explicitly defined.. > + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h > + - | > + #include <dt-bindings/arm/coresight-cti-dt.h> > + > + cti@858000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0x858000 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + > + arm,cti-ctm-id = <1>; > + > + trig-conns@0 { > + arm,trig-in-sigs = <4 5 6 7>; > + arm,trig-in-types = <ETM_EXTOUT > + ETM_EXTOUT > + ETM_EXTOUT > + ETM_EXTOUT>; > + arm,trig-out-sigs = <4 5 6 7>; > + arm,trig-out-types = <ETM_EXTIN > + ETM_EXTIN > + ETM_EXTIN > + ETM_EXTIN>; > + arm,cs-dev-assoc = <&etm0>; > + }; > + > + trig-conns@1 { > + cpu = <&CPU0>; > + arm,trig-in-sigs = <0 1>; > + arm,trig-in-types = <PE_DBGTRIGGER > + PE_PMUIRQ>; > + arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-types = <PE_EDBGREQ > + PE_DBGRESTART > + PE_CTIIRQ>; > + > + arm,trig-filters = <0>; > + }; > + }; > + # Implementation defined CTI - none CoreSight component connections. > + - | > + cti@20110000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0 0x20110000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + > + trig-conns@0 { > + arm,trig-in-sigs=<0>; > + arm,trig-in-types=<GEN_INTREQ>; > + arm,trig-out-sigs=<0>; > + arm,trig-out-types=<GEN_HALTREQ>; > + arm,trig-conn-name = "sys_profiler"; > + }; > + > + trig-conns@1 { > + arm,trig-out-sigs=<2 3>; > + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-conn-name = "watchdog"; > + }; > + > + trig-conns@2 { > + arm,trig-in-sigs=<1 6>; > + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-conn-name = "g_counter"; > + }; > + }; > + > +... > \ No newline at end of file '...' is preferred, but the fix the lack of newline. > diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt > index d02c42d21f2f..846f6daae71b 100644 > --- a/Documentation/devicetree/bindings/arm/coresight.txt > +++ b/Documentation/devicetree/bindings/arm/coresight.txt > @@ -45,6 +45,10 @@ its hardware characteristcs. > - Coresight Address Translation Unit (CATU) > "arm,coresight-catu", "arm,primecell"; > > + - Coresight Cross Trigger Interface (CTI): > + "arm,coresight-cti", "arm,primecell"; > + See coresight-cti.yaml for full CTI definitions. > + > * reg: physical base address and length of the register > set(s) of the component. > > @@ -72,6 +76,9 @@ its hardware characteristcs. > * reg-names: the only acceptable values are "stm-base" and > "stm-stimulus-base", each corresponding to the areas defined in "reg". > > +* Required properties for Coresight Cross Trigger Interface (CTI) > + See coresight-cti.yaml for full CTI definitions. > + > * Required properties for devices that don't show up on the AMBA bus, such as > non-configurable replicators and non-configurable funnels: > > diff --git a/MAINTAINERS b/MAINTAINERS > index 9de89d75dbcc..8d01a74068f7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1608,9 +1608,11 @@ R: Suzuki K Poulose <suzuki.poulose@arm.com> > L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) > S: Maintained > F: drivers/hwtracing/coresight/* > +F: include/dt-bindings/arm/coresight-cti-dt.h > F: Documentation/trace/coresight/* > F: Documentation/devicetree/bindings/arm/coresight.txt > F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt > +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml > F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* > F: tools/perf/arch/arm/util/pmu.c > F: tools/perf/arch/arm/util/auxtrace.c > diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h > new file mode 100644 > index 000000000000..61e7bdf8ea6e > --- /dev/null > +++ b/include/dt-bindings/arm/coresight-cti-dt.h > @@ -0,0 +1,37 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * This header provides constants for the defined trigger signal > + * types on CoreSight CTI. > + */ > + > +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > + > +#define GEN_IO 0 > +#define GEN_INTREQ 1 > +#define GEN_INTACK 2 > +#define GEN_HALTREQ 3 > +#define GEN_RESTARTREQ 4 > +#define PE_EDBGREQ 5 > +#define PE_DBGRESTART 6 > +#define PE_CTIIRQ 7 > +#define PE_PMUIRQ 8 > +#define PE_DBGTRIGGER 9 > +#define ETM_EXTOUT 10 > +#define ETM_EXTIN 11 > +#define SNK_FULL 12 > +#define SNK_ACQCOMP 13 > +#define SNK_FLUSHCOMP 14 > +#define SNK_FLUSHIN 15 > +#define SNK_TRIGIN 16 > +#define STM_ASYNCOUT 17 > +#define STM_TOUT_SPTE 18 > +#define STM_TOUT_SW 19 > +#define STM_TOUT_HETE 20 > +#define STM_HWEVENT 21 > +#define ELA_TSTART 22 > +#define ELA_TSTOP 23 > +#define ELA_DBGREQ 24 > +#define CTI_TRIG_MAX 25 > + > +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ > -- > 2.17.1 >
Hi Mike, On 19/11/2019 23:19, Mike Leach wrote: > Adds new coresight-cti.yaml file describing the bindings required to define > CTI in the device trees. > > Adds an include file to dt-bindings/arm to define constants describing > common signal functionality used in CoreSight and generic usage. The documentation looks really nice and helpful. Some very minor nits below. > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > --- > .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ > .../devicetree/bindings/arm/coresight.txt | 7 + > MAINTAINERS | 2 + > include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ > 4 files changed, 349 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml > create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h > > diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > new file mode 100644 > index 000000000000..882c72f1c798 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > @@ -0,0 +1,303 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright 2019 Linaro Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ARM Coresight Cross Trigger Interface (CTI) device. > + > +description: | > + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected > + to one or more CoreSight components and/or a CPU, with CTIs interconnected in > + a star topology via the CTM (which is not programmable). The ECT components nit: CTM is not expanded anywhere here. For the sake of completeness, you may do that here. i.e, s/"a start topology via the CTM"/"a start topology via the Cross Trigger Matrix (CTM)"/ > + are not part of the trace generation data path and are thus not part of the > + CoreSight graph described in the general CoreSight bindings file > + coresight.txt. > + > + The CTI component properties define the connections between the individual > + CTI and the components it is directly connected to, consisting of input and > + output hardware trigger signals. CTIs can have a maximum number of input and > + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The > + number is defined at design time, the maximum of each defined in the DEVID > + register. > + > + CTIs are interconnected in a star topology via the CTM, using a number of > + programmable channels usually 4, but again implementation defined and nit: "programmable channels, usually 4, but..." ? > + described in the DEVID register. The star topology is not required to be > + described in the bindings as the actual connections are software > + programmable. > + > + In general the connections between CTI and components via the trigger signals > + are implementation defined, other than when v8 core and ETM is present. nite: are implementation defined, *except when they are connected to an Arm v8 compatible CPU or an ETM* ? > + The v8 architecture defines the required signal connections between CPU core nit: "The Arm v8" > + and CTI, and ETM and CTI, if the ETM if present. > + > + When only minimal information is available for the CTI trigger connections, > + then a minimal driver binding can be declare with no explicit trigger > + signals. This will result in the using the DEVID register to set the > + input and output triggers and channels in use. Any user / client > + application will require additional information on the connections > + between the CTI and other components for correct operation. This minimal > + binding may be used when using the Integration Control registers to > + discover connections between CTI and other CoreSight components, How about "When the CTI trigger connection information is unavailable, the driver detects the number of triggers and channels from the DEVID register and makes them available. The Integration Control registers can be then used to discover the connections for this CTI device to other CoreSight components". Since we recommend the use of the "Integration Control registers", which is not normally available unless you play around the code, it will be a good idea to metion, what the user needs to do to make the registers available. (One more reason to use the CONFIG symbol, makes that easier.) > + > + Certain triggers between CoreSight devices and the CTI have specific types > + and usages. These can be defined along with the signal indexes with the > + constants defined in <dt-bindings/arm/coresight-cti-dt.h> > + > + For example a CTI connected to a core will usually have a DBGREQ signal. This > + is defined in the binding as type PE_EDBGREQ. These types will appear in an > + optional array alongside the signal indexes. Omitting types will default all > + signals to GEN_IO. > + > + Note that some hardware trigger signals can be connected to non-CoreSight > + components (e.g. UART etc) depending on hardware implementation. > + > +maintainers: > + - Mike Leach <mike.leach@linaro.org> > + > +allOf: > + - $ref: /schemas/arm/primecell.yaml# > + > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > +select: > + properties: > + compatible: > + contains: > + enum: > + - arm,coresight-cti > + required: > + - compatible > + > +properties: > + $nodename: > + pattern: "^cti(@[0-9a-f,]+)*$" > + compatible: > + items: > + - const: arm,coresight-cti > + - const: arm,primecell > + > + reg: > + items: > + - description: device programming registers > + > + arm,cti-v8-arch: If possible, please could we make this : "arm,cti-arm-v8-architected" to be more meaning ful ? > + type: boolean > + description: > + This CTI follows the v8 architecturally mandated layout for a CTI. > + Bindings declaring this must declare a cpu, and optionally a single > + arm,cs-dev-assoc may be present to define an attached ETM. No additional > + trig-conns nodes are permitted. The driver will build a connection model > + according to architectural requirements. This will include a filter on > + the CPU dbgreq signal as described above. > + > + cpu: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle > + description: Handle to cpu this device is associated with. > + > + arm,cti-ctm-id: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Defines the CTM this CTI is connected to, in large systems with multiple > + separate CTI/CTM nets. Typically multi-socket systems where the CTM is > + propagated between sockets. > + > + arm,cs-dev-assoc: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle > + description: > + defines a phandle reference to an associated CoreSight trace device. > + When the associated trace device is enabled, then the respective CTI > + will be enabled. Use in a trig-conns node, or in CTI base node when > + arm,cti-v8-arch present. If the associated device has not been registered > + then the node name will be stored as the connection name for later > + resolution. If the associated device is not a CoreSight device or not > + registered then the node name will remain the connection name and > + automatic enabling will not occur. > + > +patternProperties: > + '^trig_conns@[0-9]+$': I understand these bindings have been around for quite long and is too late to make any changes. So, feel free to ignore this suggestion below and I am perfectly fine with it. --- Begin silly comments Or Skip to DONE ---- Could we make the property names a bit more obvious ? Since they are supposed to be written by other people (unlike our variable names), it always makes sense to have expanded, meaningful names: s/trig_conns@/triggers@ ? s/arm,trig-{in,out}-sigs/arm,cti-{in,out}-triggers s/arm,trig-{in,out}-types/arm,cti-{in,out}-trigger-types "arm,trig-xxx" property name doesn't really imply that it is for cti. So, the above changes makes it explicit and more reader friendly. > + type: object > + description: > + A trigger connections child node which describes the trigger signals > + between this CTI and another hardware device. This device may be a CPU, > + CoreSight device, any other hardware device or simple external IO lines. > + The connection may have both input and output triggers, or only one or the > + other. > + > + properties: > + > + arm,trig-in-sigs: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger in signal numbers in use by a trig-conns node. > + > + arm,trig-in-types: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of constants representing the types for the CTI trigger in > + signals. Types in this array match to the corresponding signal in the > + arm,trig-in-sigs array. If the -types array is smaller, or omitted > + completely, then the types will default to GEN_IO. > + > + arm,trig-out-sigs: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger out signal numbers in use by a trig-conns node. > + > + arm,trig-out-types: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of constants representing the types for the CTI trigger out > + signals. Types in this array match to the corresponding signal > + in the arm,trig-out-sigs array. If the "-types" array is smaller, > + or omitted completely, then the types will default to GEN_IO. > + > + arm,trig-filters: arm,cti-trigger-filters ? > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 32 > + description: > + List of CTI trigger out signals that will be blocked from becoming > + active, unless filtering is disabled on the driver. > + > + arm,trig-conn-name: arm,cti-trigger-name ? --- DONE or End of silly comments --- > + # Implementation defined CTI - CPU + ETM connections explicitly defined.. > + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h > + - | > + #include <dt-bindings/arm/coresight-cti-dt.h> > + > + cti@858000 { > + compatible = "arm,coresight-cti", "arm,primecell"; > + reg = <0x858000 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + > + arm,cti-ctm-id = <1>; > + > + trig-conns@0 { > + arm,trig-in-sigs = <4 5 6 7>; > + arm,trig-in-types = <ETM_EXTOUT > + ETM_EXTOUT > + ETM_EXTOUT > + ETM_EXTOUT>; > + arm,trig-out-sigs = <4 5 6 7>; > + arm,trig-out-types = <ETM_EXTIN > + ETM_EXTIN > + ETM_EXTIN > + ETM_EXTIN>; > + arm,cs-dev-assoc = <&etm0>; > + }; > + > + trig-conns@1 { > + cpu = <&CPU0>; > + arm,trig-in-sigs = <0 1>; > + arm,trig-in-types = <PE_DBGTRIGGER > + PE_PMUIRQ>; > + arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-types = <PE_EDBGREQ > + PE_DBGRESTART > + PE_CTIIRQ>; > + > + arm,trig-filters = <0>; > + }; > + }; > + # Implementation defined CTI - none CoreSight component connections. nit: s/none/non ? Rest looks fine to me. Suzuki
Hi Rob, On Fri, 22 Nov 2019 at 23:33, Rob Herring <robh@kernel.org> wrote: > > On Tue, Nov 19, 2019 at 11:19:03PM +0000, Mike Leach wrote: > > Adds new coresight-cti.yaml file describing the bindings required to define > > CTI in the device trees. > > > > Adds an include file to dt-bindings/arm to define constants describing > > common signal functionality used in CoreSight and generic usage. > > > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > > --- > > .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ > > .../devicetree/bindings/arm/coresight.txt | 7 + > > MAINTAINERS | 2 + > > include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ > > 4 files changed, 349 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml > > create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h > > > > diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > > new file mode 100644 > > index 000000000000..882c72f1c798 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > > @@ -0,0 +1,303 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > Dual license new bindings please: > > (GPL-2.0-only OR BSD-2-Clause) > OK. > > +# Copyright 2019 Linaro Ltd. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ARM Coresight Cross Trigger Interface (CTI) device. > > + > > +description: | > > + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected > > + to one or more CoreSight components and/or a CPU, with CTIs interconnected in > > + a star topology via the CTM (which is not programmable). The ECT components > > + are not part of the trace generation data path and are thus not part of the > > + CoreSight graph described in the general CoreSight bindings file > > + coresight.txt. > > + > > + The CTI component properties define the connections between the individual > > + CTI and the components it is directly connected to, consisting of input and > > + output hardware trigger signals. CTIs can have a maximum number of input and > > + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The > > + number is defined at design time, the maximum of each defined in the DEVID > > + register. > > + > > + CTIs are interconnected in a star topology via the CTM, using a number of > > + programmable channels usually 4, but again implementation defined and > > + described in the DEVID register. The star topology is not required to be > > + described in the bindings as the actual connections are software > > + programmable. > > + > > + In general the connections between CTI and components via the trigger signals > > + are implementation defined, other than when v8 core and ETM is present. > > + The v8 architecture defines the required signal connections between CPU core > > + and CTI, and ETM and CTI, if the ETM if present. > > + > > + When only minimal information is available for the CTI trigger connections, > > + then a minimal driver binding can be declare with no explicit trigger > > + signals. This will result in the using the DEVID register to set the > > + input and output triggers and channels in use. Any user / client > > + application will require additional information on the connections > > + between the CTI and other components for correct operation. This minimal > > + binding may be used when using the Integration Control registers to > > + discover connections between CTI and other CoreSight components, > > + > > + Certain triggers between CoreSight devices and the CTI have specific types > > + and usages. These can be defined along with the signal indexes with the > > + constants defined in <dt-bindings/arm/coresight-cti-dt.h> > > + > > + For example a CTI connected to a core will usually have a DBGREQ signal. This > > + is defined in the binding as type PE_EDBGREQ. These types will appear in an > > + optional array alongside the signal indexes. Omitting types will default all > > + signals to GEN_IO. > > + > > + Note that some hardware trigger signals can be connected to non-CoreSight > > + components (e.g. UART etc) depending on hardware implementation. > > + > > +maintainers: > > + - Mike Leach <mike.leach@linaro.org> > > + > > +allOf: > > + - $ref: /schemas/arm/primecell.yaml# > > + > > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > > +select: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - arm,coresight-cti > > + required: > > + - compatible > > + > > +properties: > > + $nodename: > > + pattern: "^cti(@[0-9a-f,]+)*$" > > Unit address should not be optional nor have a comma. > Will fix. > > + compatible: > > + items: > > + - const: arm,coresight-cti > > + - const: arm,primecell > > + > > + reg: > > + items: > > + - description: device programming registers > > Just "maxItems: 1" is sufficient. > OK > > + > > + arm,cti-v8-arch: > > + type: boolean > > + description: > > + This CTI follows the v8 architecturally mandated layout for a CTI. > > Seems like the compatible or primecell ID registers should be used for > something like this. > Unfortunately it is possible and has happened that the same primecell regs for a CTI connected to a v8 core and one that is used as a general system CTI appear in the same system. There is no architectural requirement on the CTI to indicate that its external connections are as per v8 architecture spec when connected to a PE/ETM combo. Therefore a compatible "arm,coresight-cti-v8" would seem the best route. I'll update the compatible portion of the schema and handling code accordingly. > > + Bindings declaring this must declare a cpu, and optionally a single > > + arm,cs-dev-assoc may be present to define an attached ETM. No additional > > + trig-conns nodes are permitted. The driver will build a connection model > > + according to architectural requirements. This will include a filter on > > + the CPU dbgreq signal as described above. > > + > > + cpu: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/phandle > > + description: Handle to cpu this device is associated with. > > + > > + arm,cti-ctm-id: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + Defines the CTM this CTI is connected to, in large systems with multiple > > + separate CTI/CTM nets. Typically multi-socket systems where the CTM is > > + propagated between sockets. > > + > > + arm,cs-dev-assoc: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + defines a phandle reference to an associated CoreSight trace device. > > s/defines/Defines/ > OK > > + When the associated trace device is enabled, then the respective CTI > > + will be enabled. Use in a trig-conns node, or in CTI base node when > > + arm,cti-v8-arch present. If the associated device has not been registered > > + then the node name will be stored as the connection name for later > > + resolution. If the associated device is not a CoreSight device or not > > + registered then the node name will remain the connection name and > > + automatic enabling will not occur. > > + > > +patternProperties: > > + '^trig_conns@[0-9]+$': > > trig-conns@... > will fix. > > + type: object > > + description: > > + A trigger connections child node which describes the trigger signals > > + between this CTI and another hardware device. This device may be a CPU, > > + CoreSight device, any other hardware device or simple external IO lines. > > + The connection may have both input and output triggers, or only one or the > > + other. > > + > > + properties: > > + > > + arm,trig-in-sigs: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger in signal numbers in use by a trig-conns node. > > + > > + arm,trig-in-types: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of constants representing the types for the CTI trigger in > > + signals. Types in this array match to the corresponding signal in the > > + arm,trig-in-sigs array. If the -types array is smaller, or omitted > > + completely, then the types will default to GEN_IO. > > + > > + arm,trig-out-sigs: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger out signal numbers in use by a trig-conns node. > > + > > + arm,trig-out-types: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of constants representing the types for the CTI trigger out > > + signals. Types in this array match to the corresponding signal > > + in the arm,trig-out-sigs array. If the "-types" array is smaller, > > + or omitted completely, then the types will default to GEN_IO. > > + > > + arm,trig-filters: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger out signals that will be blocked from becoming > > + active, unless filtering is disabled on the driver. > > + > > + arm,trig-conn-name: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/string > > + description: > > + Defines a connection name that will be displayed, if the cpu or > > + arm,cs-dev-assoc properties are not being used in this connection. > > + Principle use for CTI that are connected to non-CoreSight devices, or > > + external IO. > > + > > + anyOf: > > + - required: > > + - arm,trig-in-sigs > > + - required: > > + - arm,trig-out-sigs > > + oneOf: > > + - required: > > + - arm,trig-conn-name > > + - required: > > + - cpu > > + - required: > > + - arm,cs-dev-assoc > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + > > +examples: > > + # minimum CTI definition. DEVID register used to set number of triggers. > > + - | > > + cti@20020000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x20020000 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + }; > > + # v8 architecturally defined CTI - CPU + ETM connections generated by the > > + # driver according to the v8 architecture specification. > > + - | > > + cti@859000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x859000 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + > > + arm,cti-v8-arch; > > + cpu = <&CPU1>; > > + arm,cs-dev-assoc = <&etm1>; > > + }; > > + # Implementation defined CTI - CPU + ETM connections explicitly defined.. > > + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h > > + - | > > + #include <dt-bindings/arm/coresight-cti-dt.h> > > + > > + cti@858000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x858000 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + > > + arm,cti-ctm-id = <1>; > > + > > + trig-conns@0 { > > + arm,trig-in-sigs = <4 5 6 7>; > > + arm,trig-in-types = <ETM_EXTOUT > > + ETM_EXTOUT > > + ETM_EXTOUT > > + ETM_EXTOUT>; > > + arm,trig-out-sigs = <4 5 6 7>; > > + arm,trig-out-types = <ETM_EXTIN > > + ETM_EXTIN > > + ETM_EXTIN > > + ETM_EXTIN>; > > + arm,cs-dev-assoc = <&etm0>; > > + }; > > + > > + trig-conns@1 { > > + cpu = <&CPU0>; > > + arm,trig-in-sigs = <0 1>; > > + arm,trig-in-types = <PE_DBGTRIGGER > > + PE_PMUIRQ>; > > + arm,trig-out-sigs=<0 1 2 >; > > + arm,trig-out-types = <PE_EDBGREQ > > + PE_DBGRESTART > > + PE_CTIIRQ>; > > + > > + arm,trig-filters = <0>; > > + }; > > + }; > > + # Implementation defined CTI - none CoreSight component connections. > > + - | > > + cti@20110000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0 0x20110000 0 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + > > + trig-conns@0 { > > + arm,trig-in-sigs=<0>; > > + arm,trig-in-types=<GEN_INTREQ>; > > + arm,trig-out-sigs=<0>; > > + arm,trig-out-types=<GEN_HALTREQ>; > > + arm,trig-conn-name = "sys_profiler"; > > + }; > > + > > + trig-conns@1 { > > + arm,trig-out-sigs=<2 3>; > > + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > > + arm,trig-conn-name = "watchdog"; > > + }; > > + > > + trig-conns@2 { > > + arm,trig-in-sigs=<1 6>; > > + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > > + arm,trig-conn-name = "g_counter"; > > + }; > > + }; > > + > > +... > > \ No newline at end of file > > '...' is preferred, but the fix the lack of newline. > Will do. Thanks for the feedback. Mike > > diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt > > index d02c42d21f2f..846f6daae71b 100644 > > --- a/Documentation/devicetree/bindings/arm/coresight.txt > > +++ b/Documentation/devicetree/bindings/arm/coresight.txt > > @@ -45,6 +45,10 @@ its hardware characteristcs. > > - Coresight Address Translation Unit (CATU) > > "arm,coresight-catu", "arm,primecell"; > > > > + - Coresight Cross Trigger Interface (CTI): > > + "arm,coresight-cti", "arm,primecell"; > > + See coresight-cti.yaml for full CTI definitions. > > + > > * reg: physical base address and length of the register > > set(s) of the component. > > > > @@ -72,6 +76,9 @@ its hardware characteristcs. > > * reg-names: the only acceptable values are "stm-base" and > > "stm-stimulus-base", each corresponding to the areas defined in "reg". > > > > +* Required properties for Coresight Cross Trigger Interface (CTI) > > + See coresight-cti.yaml for full CTI definitions. > > + > > * Required properties for devices that don't show up on the AMBA bus, such as > > non-configurable replicators and non-configurable funnels: > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 9de89d75dbcc..8d01a74068f7 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -1608,9 +1608,11 @@ R: Suzuki K Poulose <suzuki.poulose@arm.com> > > L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) > > S: Maintained > > F: drivers/hwtracing/coresight/* > > +F: include/dt-bindings/arm/coresight-cti-dt.h > > F: Documentation/trace/coresight/* > > F: Documentation/devicetree/bindings/arm/coresight.txt > > F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt > > +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml > > F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* > > F: tools/perf/arch/arm/util/pmu.c > > F: tools/perf/arch/arm/util/auxtrace.c > > diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h > > new file mode 100644 > > index 000000000000..61e7bdf8ea6e > > --- /dev/null > > +++ b/include/dt-bindings/arm/coresight-cti-dt.h > > @@ -0,0 +1,37 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * This header provides constants for the defined trigger signal > > + * types on CoreSight CTI. > > + */ > > + > > +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > > +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H > > + > > +#define GEN_IO 0 > > +#define GEN_INTREQ 1 > > +#define GEN_INTACK 2 > > +#define GEN_HALTREQ 3 > > +#define GEN_RESTARTREQ 4 > > +#define PE_EDBGREQ 5 > > +#define PE_DBGRESTART 6 > > +#define PE_CTIIRQ 7 > > +#define PE_PMUIRQ 8 > > +#define PE_DBGTRIGGER 9 > > +#define ETM_EXTOUT 10 > > +#define ETM_EXTIN 11 > > +#define SNK_FULL 12 > > +#define SNK_ACQCOMP 13 > > +#define SNK_FLUSHCOMP 14 > > +#define SNK_FLUSHIN 15 > > +#define SNK_TRIGIN 16 > > +#define STM_ASYNCOUT 17 > > +#define STM_TOUT_SPTE 18 > > +#define STM_TOUT_SW 19 > > +#define STM_TOUT_HETE 20 > > +#define STM_HWEVENT 21 > > +#define ELA_TSTART 22 > > +#define ELA_TSTOP 23 > > +#define ELA_DBGREQ 24 > > +#define CTI_TRIG_MAX 25 > > + > > +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ > > -- > > 2.17.1 > >
Hi Suzuki, On Thu, 28 Nov 2019 at 18:38, Suzuki Kuruppassery Poulose <suzuki.poulose@arm.com> wrote: > > Hi Mike, > > On 19/11/2019 23:19, Mike Leach wrote: > > Adds new coresight-cti.yaml file describing the bindings required to define > > CTI in the device trees. > > > > Adds an include file to dt-bindings/arm to define constants describing > > common signal functionality used in CoreSight and generic usage. > > The documentation looks really nice and helpful. Some very minor nits > below. > > > > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > > > --- > > .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ > > .../devicetree/bindings/arm/coresight.txt | 7 + > > MAINTAINERS | 2 + > > include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ > > 4 files changed, 349 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml > > create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h > > > > diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > > new file mode 100644 > > index 000000000000..882c72f1c798 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml > > @@ -0,0 +1,303 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +# Copyright 2019 Linaro Ltd. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ARM Coresight Cross Trigger Interface (CTI) device. > > + > > +description: | > > + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected > > + to one or more CoreSight components and/or a CPU, with CTIs interconnected in > > + a star topology via the CTM (which is not programmable). The ECT components > > nit: CTM is not expanded anywhere here. For the sake of completeness, > you may do that here. > > i.e, s/"a start topology via the CTM"/"a start topology via the Cross > Trigger Matrix (CTM)"/ > Agreed - I think the expansion got lost in the many re-arrangement of this doc. > > > + are not part of the trace generation data path and are thus not part of the > > + CoreSight graph described in the general CoreSight bindings file > > + coresight.txt. > > + > > + The CTI component properties define the connections between the individual > > + CTI and the components it is directly connected to, consisting of input and > > + output hardware trigger signals. CTIs can have a maximum number of input and > > + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The > > + number is defined at design time, the maximum of each defined in the DEVID > > + register. > > + > > + CTIs are interconnected in a star topology via the CTM, using a number of > > + programmable channels usually 4, but again implementation defined and > > nit: "programmable channels, usually 4, but..." ? > OK > > + described in the DEVID register. The star topology is not required to be > > + described in the bindings as the actual connections are software > > + programmable. > > + > > + In general the connections between CTI and components via the trigger signals > > + are implementation defined, other than when v8 core and ETM is present. > > nite: are implementation defined, *except when they are connected to an > Arm v8 compatible CPU or an ETM* ? > > Agreed - clearer. > > + The v8 architecture defines the required signal connections between CPU core > > nit: "The Arm v8" > > > + and CTI, and ETM and CTI, if the ETM if present. > > + > > + When only minimal information is available for the CTI trigger connections, > > + then a minimal driver binding can be declare with no explicit trigger > > + signals. This will result in the using the DEVID register to set the > > + input and output triggers and channels in use. Any user / client > > + application will require additional information on the connections > > + between the CTI and other components for correct operation. This minimal > > + binding may be used when using the Integration Control registers to > > + discover connections between CTI and other CoreSight components, > > How about "When the CTI trigger connection information is unavailable, > the driver detects the number of triggers and channels from the DEVID > register and makes them available. The Integration Control registers > can be then used to discover the connections for this CTI device > to other CoreSight components". > > Since we recommend the use of the "Integration Control registers", which > is not normally available unless you play around the code, it will be a > good idea to metion, what the user needs to do to make the registers > available. (One more reason to use the CONFIG symbol, makes that > easier.) > Agreed - need to explain the use case for this and implications of using a minimal binding. > > > + > > + Certain triggers between CoreSight devices and the CTI have specific types > > + and usages. These can be defined along with the signal indexes with the > > + constants defined in <dt-bindings/arm/coresight-cti-dt.h> > > + > > + For example a CTI connected to a core will usually have a DBGREQ signal. This > > + is defined in the binding as type PE_EDBGREQ. These types will appear in an > > + optional array alongside the signal indexes. Omitting types will default all > > + signals to GEN_IO. > > + > > + Note that some hardware trigger signals can be connected to non-CoreSight > > + components (e.g. UART etc) depending on hardware implementation. > > + > > +maintainers: > > + - Mike Leach <mike.leach@linaro.org> > > + > > +allOf: > > + - $ref: /schemas/arm/primecell.yaml# > > + > > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > > +select: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - arm,coresight-cti > > + required: > > + - compatible > > + > > +properties: > > + $nodename: > > + pattern: "^cti(@[0-9a-f,]+)*$" > > + compatible: > > + items: > > + - const: arm,coresight-cti > > + - const: arm,primecell > > + > > + reg: > > + items: > > + - description: device programming registers > > + > > + arm,cti-v8-arch: > > If possible, please could we make this : > > "arm,cti-arm-v8-architected" > > to be more meaning ful ? > Per my comments to Rob, the v8-cti case will be a compatible option, so this will disappear as an attribute. > > + type: boolean > > + description: > > + This CTI follows the v8 architecturally mandated layout for a CTI. > > + Bindings declaring this must declare a cpu, and optionally a single > > + arm,cs-dev-assoc may be present to define an attached ETM. No additional > > + trig-conns nodes are permitted. The driver will build a connection model > > + according to architectural requirements. This will include a filter on > > + the CPU dbgreq signal as described above. > > + > > + cpu: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/phandle > > + description: Handle to cpu this device is associated with. > > + > > + arm,cti-ctm-id: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + Defines the CTM this CTI is connected to, in large systems with multiple > > + separate CTI/CTM nets. Typically multi-socket systems where the CTM is > > + propagated between sockets. > > + > > + arm,cs-dev-assoc: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + defines a phandle reference to an associated CoreSight trace device. > > + When the associated trace device is enabled, then the respective CTI > > + will be enabled. Use in a trig-conns node, or in CTI base node when > > + arm,cti-v8-arch present. If the associated device has not been registered > > + then the node name will be stored as the connection name for later > > + resolution. If the associated device is not a CoreSight device or not > > + registered then the node name will remain the connection name and > > + automatic enabling will not occur. > > + > > +patternProperties: > > + '^trig_conns@[0-9]+$': > > I understand these bindings have been around for quite long and is too > late to make any changes. So, feel free to ignore this suggestion below > and I am perfectly fine with it. > > --- Begin silly comments Or Skip to DONE ---- > > Could we make the property names a bit more obvious ? Since they are > supposed to be written by other people (unlike our variable names), it > always makes sense to have expanded, meaningful names: > > s/trig_conns@/triggers@ ? > > s/arm,trig-{in,out}-sigs/arm,cti-{in,out}-triggers > s/arm,trig-{in,out}-types/arm,cti-{in,out}-trigger-types > > "arm,trig-xxx" property name doesn't really imply that it is for cti. > So, the above changes makes it explicit and more reader friendly. > > > + type: object > > + description: > > + A trigger connections child node which describes the trigger signals > > + between this CTI and another hardware device. This device may be a CPU, > > + CoreSight device, any other hardware device or simple external IO lines. > > + The connection may have both input and output triggers, or only one or the > > + other. > > + > > + properties: > > + > > + arm,trig-in-sigs: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger in signal numbers in use by a trig-conns node. > > + > > + arm,trig-in-types: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of constants representing the types for the CTI trigger in > > + signals. Types in this array match to the corresponding signal in the > > + arm,trig-in-sigs array. If the -types array is smaller, or omitted > > + completely, then the types will default to GEN_IO. > > + > > + arm,trig-out-sigs: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger out signal numbers in use by a trig-conns node. > > + > > + arm,trig-out-types: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of constants representing the types for the CTI trigger out > > + signals. Types in this array match to the corresponding signal > > + in the arm,trig-out-sigs array. If the "-types" array is smaller, > > + or omitted completely, then the types will default to GEN_IO. > > + > > + arm,trig-filters: > > arm,cti-trigger-filters ? > > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 32 > > + description: > > + List of CTI trigger out signals that will be blocked from becoming > > + active, unless filtering is disabled on the driver. > > + > > + arm,trig-conn-name: > > arm,cti-trigger-name ? > > > --- DONE or End of silly comments --- > I appreciate the comments on naming, but my feeling is to differentiate between the trigger signals and the trigger connections group. hence the sub-node has group trig_cons. I was hoping that users would get that these are CTI related by the fact that the root node is cti@... > > + # Implementation defined CTI - CPU + ETM connections explicitly defined.. > > + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h > > + - | > > + #include <dt-bindings/arm/coresight-cti-dt.h> > > + > > + cti@858000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x858000 0x1000>; > > + > > + clocks = <&soc_smc50mhz>; > > + clock-names = "apb_pclk"; > > + > > + arm,cti-ctm-id = <1>; > > + > > + trig-conns@0 { > > + arm,trig-in-sigs = <4 5 6 7>; > > + arm,trig-in-types = <ETM_EXTOUT > > + ETM_EXTOUT > > + ETM_EXTOUT > > + ETM_EXTOUT>; > > + arm,trig-out-sigs = <4 5 6 7>; > > + arm,trig-out-types = <ETM_EXTIN > > + ETM_EXTIN > > + ETM_EXTIN > > + ETM_EXTIN>; > > + arm,cs-dev-assoc = <&etm0>; > > + }; > > + > > + trig-conns@1 { > > + cpu = <&CPU0>; > > + arm,trig-in-sigs = <0 1>; > > + arm,trig-in-types = <PE_DBGTRIGGER > > + PE_PMUIRQ>; > > + arm,trig-out-sigs=<0 1 2 >; > > + arm,trig-out-types = <PE_EDBGREQ > > + PE_DBGRESTART > > + PE_CTIIRQ>; > > + > > + arm,trig-filters = <0>; > > + }; > > + }; > > + # Implementation defined CTI - none CoreSight component connections. > > nit: s/none/non ? > OK. > Rest looks fine to me. > > Suzuki Thanks Mike
On 29/11/2019 13:50, Mike Leach wrote: > Hi Rob, > > On Fri, 22 Nov 2019 at 23:33, Rob Herring <robh@kernel.org> wrote: >> >> On Tue, Nov 19, 2019 at 11:19:03PM +0000, Mike Leach wrote: >>> Adds new coresight-cti.yaml file describing the bindings required to define >>> CTI in the device trees. >>> >>> Adds an include file to dt-bindings/arm to define constants describing >>> common signal functionality used in CoreSight and generic usage. >>> >>> Signed-off-by: Mike Leach <mike.leach@linaro.org> >>> --- >>> .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ >>> .../devicetree/bindings/arm/coresight.txt | 7 + >>> MAINTAINERS | 2 + >>> include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ >>> 4 files changed, 349 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml >>> create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h >>> >>> diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml >>> new file mode 100644 >>> index 000000000000..882c72f1c798 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml >>> @@ -0,0 +1,303 @@ >>> +# SPDX-License-Identifier: GPL-2.0 >> >> Dual license new bindings please: >> >> (GPL-2.0-only OR BSD-2-Clause) >> > OK. > >>> +# Copyright 2019 Linaro Ltd. >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: ARM Coresight Cross Trigger Interface (CTI) device. >>> + >>> +description: | >>> + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected >>> + to one or more CoreSight components and/or a CPU, with CTIs interconnected in >>> + a star topology via the CTM (which is not programmable). The ECT components >>> + are not part of the trace generation data path and are thus not part of the >>> + CoreSight graph described in the general CoreSight bindings file >>> + coresight.txt. >>> + >>> + The CTI component properties define the connections between the individual >>> + CTI and the components it is directly connected to, consisting of input and >>> + output hardware trigger signals. CTIs can have a maximum number of input and >>> + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The >>> + number is defined at design time, the maximum of each defined in the DEVID >>> + register. >>> + >>> + CTIs are interconnected in a star topology via the CTM, using a number of >>> + programmable channels usually 4, but again implementation defined and >>> + described in the DEVID register. The star topology is not required to be >>> + described in the bindings as the actual connections are software >>> + programmable. >>> + >>> + In general the connections between CTI and components via the trigger signals >>> + are implementation defined, other than when v8 core and ETM is present. >>> + The v8 architecture defines the required signal connections between CPU core >>> + and CTI, and ETM and CTI, if the ETM if present. >>> + >>> + When only minimal information is available for the CTI trigger connections, >>> + then a minimal driver binding can be declare with no explicit trigger >>> + signals. This will result in the using the DEVID register to set the >>> + input and output triggers and channels in use. Any user / client >>> + application will require additional information on the connections >>> + between the CTI and other components for correct operation. This minimal >>> + binding may be used when using the Integration Control registers to >>> + discover connections between CTI and other CoreSight components, >>> + >>> + Certain triggers between CoreSight devices and the CTI have specific types >>> + and usages. These can be defined along with the signal indexes with the >>> + constants defined in <dt-bindings/arm/coresight-cti-dt.h> >>> + >>> + For example a CTI connected to a core will usually have a DBGREQ signal. This >>> + is defined in the binding as type PE_EDBGREQ. These types will appear in an >>> + optional array alongside the signal indexes. Omitting types will default all >>> + signals to GEN_IO. >>> + >>> + Note that some hardware trigger signals can be connected to non-CoreSight >>> + components (e.g. UART etc) depending on hardware implementation. >>> + >>> +maintainers: >>> + - Mike Leach <mike.leach@linaro.org> >>> + >>> +allOf: >>> + - $ref: /schemas/arm/primecell.yaml# >>> + >>> +# Need a custom select here or 'arm,primecell' will match on lots of nodes >>> +select: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - arm,coresight-cti >>> + required: >>> + - compatible >>> + >>> +properties: >>> + $nodename: >>> + pattern: "^cti(@[0-9a-f,]+)*$" >> >> Unit address should not be optional nor have a comma. >> > > Will fix. > >>> + compatible: >>> + items: >>> + - const: arm,coresight-cti >>> + - const: arm,primecell >>> + >>> + reg: >>> + items: >>> + - description: device programming registers >> >> Just "maxItems: 1" is sufficient. >> > > OK > >>> + >>> + arm,cti-v8-arch: >>> + type: boolean >>> + description: >>> + This CTI follows the v8 architecturally mandated layout for a CTI. >> >> Seems like the compatible or primecell ID registers should be used for >> something like this. >> > > Unfortunately it is possible and has happened that the same primecell > regs for a CTI connected to a v8 core and one that is used as a > general system CTI appear in the same system. > There is no architectural requirement on the CTI to indicate that its > external connections are as per v8 architecture spec when connected to > a PE/ETM combo. > > Therefore a compatible "arm,coresight-cti-v8" would seem the best > route. I'll update the compatible portion of the schema and handling > code accordingly. Looks sensible to me. However, please be aware that the coresight devices are triggered via the AMBA bus probe. So, you may have to scan the list of compatibles for this device to figure out, if this is really v8-compatble. Cheers Suzuki
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml new file mode 100644 index 000000000000..882c72f1c798 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -0,0 +1,303 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Cross Trigger Interface (CTI) device. + +description: | + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected + to one or more CoreSight components and/or a CPU, with CTIs interconnected in + a star topology via the CTM (which is not programmable). The ECT components + are not part of the trace generation data path and are thus not part of the + CoreSight graph described in the general CoreSight bindings file + coresight.txt. + + The CTI component properties define the connections between the individual + CTI and the components it is directly connected to, consisting of input and + output hardware trigger signals. CTIs can have a maximum number of input and + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The + number is defined at design time, the maximum of each defined in the DEVID + register. + + CTIs are interconnected in a star topology via the CTM, using a number of + programmable channels usually 4, but again implementation defined and + described in the DEVID register. The star topology is not required to be + described in the bindings as the actual connections are software + programmable. + + In general the connections between CTI and components via the trigger signals + are implementation defined, other than when v8 core and ETM is present. + The v8 architecture defines the required signal connections between CPU core + and CTI, and ETM and CTI, if the ETM if present. + + When only minimal information is available for the CTI trigger connections, + then a minimal driver binding can be declare with no explicit trigger + signals. This will result in the using the DEVID register to set the + input and output triggers and channels in use. Any user / client + application will require additional information on the connections + between the CTI and other components for correct operation. This minimal + binding may be used when using the Integration Control registers to + discover connections between CTI and other CoreSight components, + + Certain triggers between CoreSight devices and the CTI have specific types + and usages. These can be defined along with the signal indexes with the + constants defined in <dt-bindings/arm/coresight-cti-dt.h> + + For example a CTI connected to a core will usually have a DBGREQ signal. This + is defined in the binding as type PE_EDBGREQ. These types will appear in an + optional array alongside the signal indexes. Omitting types will default all + signals to GEN_IO. + + Note that some hardware trigger signals can be connected to non-CoreSight + components (e.g. UART etc) depending on hardware implementation. + +maintainers: + - Mike Leach <mike.leach@linaro.org> + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,coresight-cti + required: + - compatible + +properties: + $nodename: + pattern: "^cti(@[0-9a-f,]+)*$" + compatible: + items: + - const: arm,coresight-cti + - const: arm,primecell + + reg: + items: + - description: device programming registers + + arm,cti-v8-arch: + type: boolean + description: + This CTI follows the v8 architecturally mandated layout for a CTI. + Bindings declaring this must declare a cpu, and optionally a single + arm,cs-dev-assoc may be present to define an attached ETM. No additional + trig-conns nodes are permitted. The driver will build a connection model + according to architectural requirements. This will include a filter on + the CPU dbgreq signal as described above. + + cpu: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: Handle to cpu this device is associated with. + + arm,cti-ctm-id: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the CTM this CTI is connected to, in large systems with multiple + separate CTI/CTM nets. Typically multi-socket systems where the CTM is + propagated between sockets. + + arm,cs-dev-assoc: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: + defines a phandle reference to an associated CoreSight trace device. + When the associated trace device is enabled, then the respective CTI + will be enabled. Use in a trig-conns node, or in CTI base node when + arm,cti-v8-arch present. If the associated device has not been registered + then the node name will be stored as the connection name for later + resolution. If the associated device is not a CoreSight device or not + registered then the node name will remain the connection name and + automatic enabling will not occur. + +patternProperties: + '^trig_conns@[0-9]+$': + type: object + description: + A trigger connections child node which describes the trigger signals + between this CTI and another hardware device. This device may be a CPU, + CoreSight device, any other hardware device or simple external IO lines. + The connection may have both input and output triggers, or only one or the + other. + + properties: + + arm,trig-in-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger in signal numbers in use by a trig-conns node. + + arm,trig-in-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger in + signals. Types in this array match to the corresponding signal in the + arm,trig-in-sigs array. If the -types array is smaller, or omitted + completely, then the types will default to GEN_IO. + + arm,trig-out-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signal numbers in use by a trig-conns node. + + arm,trig-out-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger out + signals. Types in this array match to the corresponding signal + in the arm,trig-out-sigs array. If the "-types" array is smaller, + or omitted completely, then the types will default to GEN_IO. + + arm,trig-filters: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signals that will be blocked from becoming + active, unless filtering is disabled on the driver. + + arm,trig-conn-name: + allOf: + - $ref: /schemas/types.yaml#/definitions/string + description: + Defines a connection name that will be displayed, if the cpu or + arm,cs-dev-assoc properties are not being used in this connection. + Principle use for CTI that are connected to non-CoreSight devices, or + external IO. + + anyOf: + - required: + - arm,trig-in-sigs + - required: + - arm,trig-out-sigs + oneOf: + - required: + - arm,trig-conn-name + - required: + - cpu + - required: + - arm,cs-dev-assoc + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + # minimum CTI definition. DEVID register used to set number of triggers. + - | + cti@20020000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x20020000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + # v8 architecturally defined CTI - CPU + ETM connections generated by the + # driver according to the v8 architecture specification. + - | + cti@859000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + arm,cti-v8-arch; + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + # Implementation defined CTI - CPU + ETM connections explicitly defined.. + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h + - | + #include <dt-bindings/arm/coresight-cti-dt.h> + + cti@858000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + arm,cti-ctm-id = <1>; + + trig-conns@0 { + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT>; + arm,trig-out-sigs = <4 5 6 7>; + arm,trig-out-types = <ETM_EXTIN + ETM_EXTIN + ETM_EXTIN + ETM_EXTIN>; + arm,cs-dev-assoc = <&etm0>; + }; + + trig-conns@1 { + cpu = <&CPU0>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <PE_DBGTRIGGER + PE_PMUIRQ>; + arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-types = <PE_EDBGREQ + PE_DBGRESTART + PE_CTIIRQ>; + + arm,trig-filters = <0>; + }; + }; + # Implementation defined CTI - none CoreSight component connections. + - | + cti@20110000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + trig-conns@0 { + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + arm,trig-in-sigs=<1 6>; + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + +... \ No newline at end of file diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index d02c42d21f2f..846f6daae71b 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -45,6 +45,10 @@ its hardware characteristcs. - Coresight Address Translation Unit (CATU) "arm,coresight-catu", "arm,primecell"; + - Coresight Cross Trigger Interface (CTI): + "arm,coresight-cti", "arm,primecell"; + See coresight-cti.yaml for full CTI definitions. + * reg: physical base address and length of the register set(s) of the component. @@ -72,6 +76,9 @@ its hardware characteristcs. * reg-names: the only acceptable values are "stm-base" and "stm-stimulus-base", each corresponding to the areas defined in "reg". +* Required properties for Coresight Cross Trigger Interface (CTI) + See coresight-cti.yaml for full CTI definitions. + * Required properties for devices that don't show up on the AMBA bus, such as non-configurable replicators and non-configurable funnels: diff --git a/MAINTAINERS b/MAINTAINERS index 9de89d75dbcc..8d01a74068f7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1608,9 +1608,11 @@ R: Suzuki K Poulose <suzuki.poulose@arm.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/hwtracing/coresight/* +F: include/dt-bindings/arm/coresight-cti-dt.h F: Documentation/trace/coresight/* F: Documentation/devicetree/bindings/arm/coresight.txt F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* F: tools/perf/arch/arm/util/pmu.c F: tools/perf/arch/arm/util/auxtrace.c diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h new file mode 100644 index 000000000000..61e7bdf8ea6e --- /dev/null +++ b/include/dt-bindings/arm/coresight-cti-dt.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the defined trigger signal + * types on CoreSight CTI. + */ + +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H + +#define GEN_IO 0 +#define GEN_INTREQ 1 +#define GEN_INTACK 2 +#define GEN_HALTREQ 3 +#define GEN_RESTARTREQ 4 +#define PE_EDBGREQ 5 +#define PE_DBGRESTART 6 +#define PE_CTIIRQ 7 +#define PE_PMUIRQ 8 +#define PE_DBGTRIGGER 9 +#define ETM_EXTOUT 10 +#define ETM_EXTIN 11 +#define SNK_FULL 12 +#define SNK_ACQCOMP 13 +#define SNK_FLUSHCOMP 14 +#define SNK_FLUSHIN 15 +#define SNK_TRIGIN 16 +#define STM_ASYNCOUT 17 +#define STM_TOUT_SPTE 18 +#define STM_TOUT_SW 19 +#define STM_TOUT_HETE 20 +#define STM_HWEVENT 21 +#define ELA_TSTART 22 +#define ELA_TSTOP 23 +#define ELA_DBGREQ 24 +#define CTI_TRIG_MAX 25 + +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */
Adds new coresight-cti.yaml file describing the bindings required to define CTI in the device trees. Adds an include file to dt-bindings/arm to define constants describing common signal functionality used in CoreSight and generic usage. Signed-off-by: Mike Leach <mike.leach@linaro.org> --- .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ .../devicetree/bindings/arm/coresight.txt | 7 + MAINTAINERS | 2 + include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ 4 files changed, 349 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h