| Message ID | 20191202185729.12921-1-jsarha@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel | expand |
Hi Jyri, Thank you for the patch. On Mon, Dec 02, 2019 at 08:57:29PM +0200, Jyri Sarha wrote: > Move to use the new drm panel support in tilcdc together with added > "tfc,s9700rtwv43tr-01b"-panel support in drm panel-simple. > > Signed-off-by: Jyri Sarha <jsarha@ti.com> > Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > --- > "tfc,s9700rtwv43tr-01b" in panel-simple has been in for some time now > so it is about time to get this in too. > > arch/arm/boot/dts/am335x-evm.dts | 44 +++++++++++++------------------- > 1 file changed, 18 insertions(+), 26 deletions(-) > > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > index a00145705c9b..0e286a1c9cc5 100644 > --- a/arch/arm/boot/dts/am335x-evm.dts > +++ b/arch/arm/boot/dts/am335x-evm.dts > @@ -113,7 +113,7 @@ > }; > }; > > - backlight { > + backlight: backlight { > compatible = "pwm-backlight"; > pwms = <&ecap0 0 50000 0>; > brightness-levels = <0 51 53 56 62 75 101 152 255>; > @@ -121,35 +121,19 @@ > }; > > panel { > - compatible = "ti,tilcdc,panel"; > + compatible = "tfc,s9700rtwv43tr-01b"; > + > status = "okay"; I think this can be dropped as it's implicit. > + > pinctrl-names = "default"; > pinctrl-0 = <&lcd_pins_s0>; > - panel-info { > - ac-bias = <255>; > - ac-bias-intrpt = <0>; > - dma-burst-sz = <16>; > - bpp = <32>; > - fdd = <0x80>; > - sync-edge = <0>; > - sync-ctrl = <1>; > - raster-order = <0>; > - fifo-th = <0>; > - }; > > - display-timings { > - 800x480p62 { > - clock-frequency = <30000000>; > - hactive = <800>; > - vactive = <480>; > - hfront-porch = <39>; > - hback-porch = <39>; > - hsync-len = <47>; > - vback-porch = <29>; > - vfront-porch = <13>; > - vsync-len = <2>; > - hsync-active = <1>; > - vsync-active = <1>; > + backlight = <&backlight>; I would add a blank line here. > + ports { > + port { > + panel_0: endpoint@0 { > + remote-endpoint = <&lcdc_0>; > + }; > }; > }; The outter ports node isn't required if there's a single port, up to you. > }; > @@ -525,6 +509,14 @@ > status = "okay"; > > blue-and-red-wiring = "crossed"; > + > + ports { > + port { > + lcdc_0: endpoint@0 { > + remote-endpoint = <&panel_0>; > + }; > + }; > + }; Same here. With the above issues addressed as applicable, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > }; > > &elm {
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index a00145705c9b..0e286a1c9cc5 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -113,7 +113,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -121,35 +121,19 @@ }; panel { - compatible = "ti,tilcdc,panel"; + compatible = "tfc,s9700rtwv43tr-01b"; + status = "okay"; + pinctrl-names = "default"; pinctrl-0 = <&lcd_pins_s0>; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <32>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - display-timings { - 800x480p62 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <39>; - hback-porch = <39>; - hsync-len = <47>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <2>; - hsync-active = <1>; - vsync-active = <1>; + backlight = <&backlight>; + ports { + port { + panel_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; }; }; }; @@ -525,6 +509,14 @@ status = "okay"; blue-and-red-wiring = "crossed"; + + ports { + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&panel_0>; + }; + }; + }; }; &elm {