| Message ID | 20191203114743.1294-2-nsaenzjulienne@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Raspberry Pi 4 PCIe support | expand |
On Tue, Dec 03, 2019 at 12:47:34PM +0100, Nicolas Saenz Julienne wrote: > From: Jim Quinlan <james.quinlan@broadcom.com> > > The DT bindings description of the brcmstb PCIe device is described. > This node can only be used for now on the Raspberry Pi 4. > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Reviewed-by: Rob Herring <robh@kernel.org> > > --- Reviewed-by: Andrew Murray <andrew.murray@arm.com> > > Changes since v2: > - Add pci reference schema > - Drop all default properties > - Assume msi-controller and msi-parent are properly defined > - Add num entries on multiple properties > - use unevaluatedProperties > - Update required properties > - Fix license > > Changes since v1: > - Fix commit Subject > - Remove linux,pci-domain > > This was based on Jim's original submission[1], converted to yaml and > adapted to the RPi4 case. > > [1] https://patchwork.kernel.org/patch/10605937/ > > .../bindings/pci/brcm,stb-pcie.yaml | 97 +++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > new file mode 100644 > index 000000000000..77d3e81a437b > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Brcmstb PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +properties: > + compatible: > + const: brcm,bcm2711-pcie # The Raspberry Pi 4 > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 2 > + items: > + - description: PCIe host controller > + - description: builtin MSI controller > + > + interrupt-names: > + minItems: 1 > + maxItems: 2 > + items: > + - const: pcie > + - const: msi > + > + ranges: > + maxItems: 1 > + > + dma-ranges: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: sw_pcie > + > + msi-controller: > + description: Identifies the node as an MSI controller. > + > + msi-parent: > + description: MSI controller the device is capable of using. > + > + brcm,enable-ssc: > + description: Indicates usage of spread-spectrum clocking. > + type: boolean > + > +required: > + - reg > + - dma-ranges > + - "#interrupt-cells" > + - interrupts > + - interrupt-names > + - interrupt-map-mask > + - interrupt-map > + - msi-controller > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + scb { > + #address-cells = <2>; > + #size-cells = <1>; > + pcie0: pcie@7d500000 { > + compatible = "brcm,bcm2711-pcie"; > + reg = <0x0 0x7d500000 0x9310>; > + device_type = "pci"; > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "pcie", "msi"; > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; > + msi-parent = <&pcie0>; > + msi-controller; > + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; > + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; > + brcm,enable-ssc; > + }; > + }; > -- > 2.24.0 >
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000000..77d3e81a437b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller Device Tree Bindings + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: brcm,bcm2711-pcie # The Raspberry Pi 4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + +required: + - reg + - dma-ranges + - "#interrupt-cells" + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + }; + };