diff mbox series

[v7,2/5] clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE

Message ID 9d986ef7a3cb379cea59616ad18e96e3245cbaba.1574458460.git.leonard.crestez@nxp.com (mailing list archive)
State New, archived
Headers show
Series PM / devfreq: Add dynamic scaling for imx8m ddr controller | expand

Commit Message

Leonard Crestez Nov. 22, 2019, 9:45 p.m. UTC
DRAM frequency switches are executed in firmware and can change the
configuration of the DRAM PLL outside linux. Mark these CLKs with
CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and
recalculate rates.

In current DRAM frequency tables on 8mm/8mn only the maximum frequency
uses the PLL so it's always configured in the same way. However reading
back the PLL configuration is the correct behavior and allows additional
setpoints in the future.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
---
 drivers/clk/imx/clk-imx8mm.c  | 2 +-
 drivers/clk/imx/clk-imx8mn.c  | 2 +-
 drivers/clk/imx/clk-pll14xx.c | 7 +++++++
 drivers/clk/imx/clk.h         | 1 +
 4 files changed, 10 insertions(+), 2 deletions(-)

Comments

Shawn Guo Dec. 9, 2019, 1:16 a.m. UTC | #1
On Fri, Nov 22, 2019 at 11:45:01PM +0200, Leonard Crestez wrote:
> DRAM frequency switches are executed in firmware and can change the
> configuration of the DRAM PLL outside linux. Mark these CLKs with
> CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and
> recalculate rates.
> 
> In current DRAM frequency tables on 8mm/8mn only the maximum frequency
> uses the PLL so it's always configured in the same way. However reading
> back the PLL configuration is the correct behavior and allows additional
> setpoints in the future.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Reviewed-by: Abel Vesa <abel.vesa@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 1f43e8f6b362..d5e767e399db 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -326,11 +326,11 @@  static int imx8mm_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MM_SYS_PLL3_REF_SEL] = imx_clk_mux("sys_pll3_ref_sel", base + 0x114, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
 
 	clks[IMX8MM_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx_1443x_pll);
 	clks[IMX8MM_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx_1443x_pll);
 	clks[IMX8MM_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
-	clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_pll);
+	clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_dram_pll);
 	clks[IMX8MM_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
 	clks[IMX8MM_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
 	clks[IMX8MM_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
 	clks[IMX8MM_SYS_PLL1] = imx_clk_fixed("sys_pll1", 800000000);
 	clks[IMX8MM_SYS_PLL2] = imx_clk_fixed("sys_pll2", 1000000000);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 49a05c5576fe..b0e07784defb 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -323,11 +323,11 @@  static int imx8mn_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MN_SYS_PLL3_REF_SEL] = imx_clk_mux("sys_pll3_ref_sel", base + 0x114, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
 
 	clks[IMX8MN_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx_1443x_pll);
 	clks[IMX8MN_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx_1443x_pll);
 	clks[IMX8MN_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
-	clks[IMX8MN_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_pll);
+	clks[IMX8MN_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_dram_pll);
 	clks[IMX8MN_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
 	clks[IMX8MN_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
 	clks[IMX8MN_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
 	clks[IMX8MN_SYS_PLL1] = imx_clk_fixed("sys_pll1", 800000000);
 	clks[IMX8MN_SYS_PLL2] = imx_clk_fixed("sys_pll2", 1000000000);
diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 5c458199060a..a6d31a7262ef 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -65,10 +65,17 @@  struct imx_pll14xx_clk imx_1443x_pll = {
 	.type = PLL_1443X,
 	.rate_table = imx_pll1443x_tbl,
 	.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
 };
 
+struct imx_pll14xx_clk imx_1443x_dram_pll = {
+	.type = PLL_1443X,
+	.rate_table = imx_pll1443x_tbl,
+	.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
+	.flags = CLK_GET_RATE_NOCACHE,
+};
+
 struct imx_pll14xx_clk imx_1416x_pll = {
 	.type = PLL_1416X,
 	.rate_table = imx_pll1416x_tbl,
 	.rate_count = ARRAY_SIZE(imx_pll1416x_tbl),
 };
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index bc5bb6ac8636..81122c9ab842 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -50,10 +50,11 @@  struct imx_pll14xx_clk {
 	int flags;
 };
 
 extern struct imx_pll14xx_clk imx_1416x_pll;
 extern struct imx_pll14xx_clk imx_1443x_pll;
+extern struct imx_pll14xx_clk imx_1443x_dram_pll;
 
 #define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
 	imx_clk_hw_cpu(name, parent_name, div, mux, pll, step)->clk
 
 #define clk_register_gate2(dev, name, parent_name, flags, reg, bit_idx, \