@@ -407,7 +407,7 @@
pinctrl-0 = <&pinctrl_dspi1>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -420,7 +420,7 @@
};
};
- spi-flash@1 {
+ flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -509,7 +509,7 @@
#gpio-cells = <2>;
};
- lm75@48 {
+ temp-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
};
@@ -524,7 +524,7 @@
reg = <0x52>;
};
- ds1682@6b {
+ elapsed-time-recorder@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
@@ -536,7 +536,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
@@ -548,7 +548,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- gpio9: sx1503q@20 {
+ gpio9: io-expander@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -559,12 +559,12 @@
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
- lm75@4e {
+ temp-sensor@4e {
compatible = "national,lm75";
reg = <0x4e>;
};
- lm75@4f {
+ temp-sensor@4f {
compatible = "national,lm75";
reg = <0x4f>;
};
@@ -576,17 +576,17 @@
reg = <0x23>;
};
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
- at24c08@54 {
+ eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
};
- tca9548@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
#address-cells = <1>;
@@ -625,7 +625,7 @@
};
};
- tca9548@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
reg = <0x71>;
The devicetree specification recommends using generic node names. Some ZII dts files already follow such recommendation, but some don't, so use generic node names for consistency among the ZII dts files. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- Changes since [v1]: - Rebased on top of 12/05 linux-next - Added "ARM: dts: vf610-zii-scu4-aib: Add node for switch watchdog" to this series, which was previously accidental and implicit prerequisite for this patch [v1] lore.kernel.org/lkml/20190824002747.14610-1-andrew.smirnov@gmail.com arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)