| Message ID | 0101016e7f99eab9-35efa01f-8ed3-4a77-87e1-09c381173121-000000@us-west-2.amazonses.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add power-domain support for SC7180/SM8150 SoCs | expand |
On Mon 18 Nov 09:40 PST 2019, Sibi Sankar wrote: > Add the DT node for the rpmhpd power controller. > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Series applied, please send separate patch for the yaml migration. Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 55 ++++++++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 8f23fcadecb89..0ac257637c2af 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -5,6 +5,7 @@ > */ > > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > #include <dt-bindings/clock/qcom,rpmh.h> > > @@ -469,6 +470,60 @@ > clock-names = "xo"; > clocks = <&xo_board>; > }; > + > + rpmhpd: power-controller { > + compatible = "qcom,sm8150-rpmhpd"; > + #power-domain-cells = <1>; > + operating-points-v2 = <&rpmhpd_opp_table>; > + > + rpmhpd_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + rpmhpd_opp_ret: opp1 { > + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; > + }; > + > + rpmhpd_opp_min_svs: opp2 { > + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; > + }; > + > + rpmhpd_opp_low_svs: opp3 { > + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; > + }; > + > + rpmhpd_opp_svs: opp4 { > + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; > + }; > + > + rpmhpd_opp_svs_l1: opp5 { > + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; > + }; > + > + rpmhpd_opp_svs_l2: opp6 { > + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; > + }; > + > + rpmhpd_opp_nom: opp7 { > + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; > + }; > + > + rpmhpd_opp_nom_l1: opp8 { > + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; > + }; > + > + rpmhpd_opp_nom_l2: opp9 { > + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; > + }; > + > + rpmhpd_opp_turbo: opp10 { > + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; > + }; > + > + rpmhpd_opp_turbo_l1: opp11 { > + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; > + }; > + }; > + }; > }; > }; > > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On 2019-12-12 13:09, Bjorn Andersson wrote: > On Mon 18 Nov 09:40 PST 2019, Sibi Sankar wrote: > >> Add the DT node for the rpmhpd power controller. >> >> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> > > Series applied, please send separate patch for the yaml migration. Thanks Bjorn, will send it out asap > > Regards, > Bjorn > >> --- >> arch/arm64/boot/dts/qcom/sm8150.dtsi | 55 >> ++++++++++++++++++++++++++++ >> 1 file changed, 55 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi >> b/arch/arm64/boot/dts/qcom/sm8150.dtsi >> index 8f23fcadecb89..0ac257637c2af 100644 >> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi >> @@ -5,6 +5,7 @@ >> */ >> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/power/qcom-rpmpd.h> >> #include <dt-bindings/soc/qcom,rpmh-rsc.h> >> #include <dt-bindings/clock/qcom,rpmh.h> >> >> @@ -469,6 +470,60 @@ >> clock-names = "xo"; >> clocks = <&xo_board>; >> }; >> + >> + rpmhpd: power-controller { >> + compatible = "qcom,sm8150-rpmhpd"; >> + #power-domain-cells = <1>; >> + operating-points-v2 = <&rpmhpd_opp_table>; >> + >> + rpmhpd_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + rpmhpd_opp_ret: opp1 { >> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; >> + }; >> + >> + rpmhpd_opp_min_svs: opp2 { >> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; >> + }; >> + >> + rpmhpd_opp_low_svs: opp3 { >> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; >> + }; >> + >> + rpmhpd_opp_svs: opp4 { >> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; >> + }; >> + >> + rpmhpd_opp_svs_l1: opp5 { >> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; >> + }; >> + >> + rpmhpd_opp_svs_l2: opp6 { >> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; >> + }; >> + >> + rpmhpd_opp_nom: opp7 { >> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; >> + }; >> + >> + rpmhpd_opp_nom_l1: opp8 { >> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; >> + }; >> + >> + rpmhpd_opp_nom_l2: opp9 { >> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; >> + }; >> + >> + rpmhpd_opp_turbo: opp10 { >> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; >> + }; >> + >> + rpmhpd_opp_turbo_l1: opp11 { >> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; >> + }; >> + }; >> + }; >> }; >> }; >> >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project >>
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 8f23fcadecb89..0ac257637c2af 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -469,6 +470,60 @@ clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sm8150-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; }; };
Add the DT node for the rpmhpd power controller. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 55 ++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)