| Message ID | 20191204144024.16021-1-jsarha@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0 | expand |
On 04/12/2019 16:40, Jyri Sarha wrote: > Add support for OSD9616P0899-10 96x16 passive matrix display. The > pre-charge period parameters are taken form a OSD9616P0899-10 > document, but the display works fine with the default values too. > > Signed-off-by: Jyri Sarha <jsarha@ti.com> > --- > arch/arm/boot/dts/am335x-icev2.dts | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts > index 204bccfcc110..021eb57261fe 100644 > --- a/arch/arm/boot/dts/am335x-icev2.dts > +++ b/arch/arm/boot/dts/am335x-icev2.dts > @@ -287,6 +287,19 @@ > gpio-controller; > #gpio-cells = <2>; > }; > + > + /* osd9616p0899-10 */ > + display@3c { > + compatible = "solomon,ssd1306fb-i2c"; > + reg = <0x3c>; > + solomon,height = <16>; > + solomon,width = <96>; > + solomon,com-seq; > + solomon,com-invdir; > + solomon,page-offset = <0>; > + solomon,prechargep1 = <2>; > + solomon,prechargep2 = <13>; > + }; > }; > > &spi0 { > Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tomi
* Tomi Valkeinen <tomi.valkeinen@ti.com> [191204 20:10]: > On 04/12/2019 16:40, Jyri Sarha wrote: > > Add support for OSD9616P0899-10 96x16 passive matrix display. The > > pre-charge period parameters are taken form a OSD9616P0899-10 > > document, but the display works fine with the default values too. > > > > Signed-off-by: Jyri Sarha <jsarha@ti.com> ... > Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Thanks applying into omap-for-v5.6/dt. Tony
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 204bccfcc110..021eb57261fe 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -287,6 +287,19 @@ gpio-controller; #gpio-cells = <2>; }; + + /* osd9616p0899-10 */ + display@3c { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + solomon,height = <16>; + solomon,width = <96>; + solomon,com-seq; + solomon,com-invdir; + solomon,page-offset = <0>; + solomon,prechargep1 = <2>; + solomon,prechargep2 = <13>; + }; }; &spi0 {
Add support for OSD9616P0899-10 96x16 passive matrix display. The pre-charge period parameters are taken form a OSD9616P0899-10 document, but the display works fine with the default values too. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- arch/arm/boot/dts/am335x-icev2.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)