new file mode 100644
@@ -0,0 +1,701 @@
+================
+Kconfig Language
+================
+
+Introduction
+------------
+
+The configuration database is a collection of configuration options
+organized in a tree structure::
+
+ +- Code maturity level options
+ | +- Prompt for development and/or incomplete code/drivers
+ +- General setup
+ | +- Networking support
+ | +- System V IPC
+ | +- BSD Process Accounting
+ | +- Sysctl support
+ +- Loadable module support
+ | +- Enable loadable module support
+ | +- Set version information on all module symbols
+ | +- Kernel module loader
+ +- ...
+
+Every entry has its own dependencies. These dependencies are used
+to determine the visibility of an entry. Any child entry is only
+visible if its parent entry is also visible.
+
+Menu entries
+------------
+
+Most entries define a config option; all other entries help to organize
+them. A single configuration option is defined like this::
+
+ config MODVERSIONS
+ bool "Set version information on all module symbols"
+ depends on MODULES
+ help
+ Usually, modules have to be recompiled whenever you switch to a new
+ kernel. ...
+
+Every line starts with a key word and can be followed by multiple
+arguments. "config" starts a new config entry. The following lines
+define attributes for this config option. Attributes can be the type of
+the config option, input prompt, dependencies, help text and default
+values. A config option can be defined multiple times with the same
+name, but every definition can have only a single input prompt and the
+type must not conflict.
+
+Menu attributes
+---------------
+
+A menu entry can have a number of attributes. Not all of them are
+applicable everywhere (see syntax).
+
+- type definition: "bool"/"tristate"/"string"/"hex"/"int"
+
+ Every config option must have a type. There are only two basic types:
+ tristate and string; the other types are based on these two. The type
+ definition optionally accepts an input prompt, so these two examples
+ are equivalent::
+
+ bool "Networking support"
+
+ and::
+
+ bool
+ prompt "Networking support"
+
+- input prompt: "prompt" <prompt> ["if" <expr>]
+
+ Every menu entry can have at most one prompt, which is used to display
+ to the user. Optionally dependencies only for this prompt can be added
+ with "if".
+
+- default value: "default" <expr> ["if" <expr>]
+
+ A config option can have any number of default values. If multiple
+ default values are visible, only the first defined one is active.
+ Default values are not limited to the menu entry where they are
+ defined. This means the default can be defined somewhere else or be
+ overridden by an earlier definition.
+ The default value is only assigned to the config symbol if no other
+ value was set by the user (via the input prompt above). If an input
+ prompt is visible the default value is presented to the user and can
+ be overridden by him.
+ Optionally, dependencies only for this default value can be added with
+ "if".
+
+ The default value deliberately defaults to 'n' in order to avoid bloating the
+ build. With few exceptions, new config options should not change this. The
+ intent is for "make oldconfig" to add as little as possible to the config from
+ release to release.
+
+ Note:
+ Things that merit "default y/m" include:
+
+ a) A new Kconfig option for something that used to always be built
+ should be "default y".
+
+ b) A new gatekeeping Kconfig option that hides/shows other Kconfig
+ options (but does not generate any code of its own), should be
+ "default y" so people will see those other options.
+
+ c) Sub-driver behavior or similar options for a driver that is
+ "default n". This allows you to provide sane defaults.
+
+ d) Hardware or infrastructure that everybody expects, such as CONFIG_NET
+ or CONFIG_BLOCK. These are rare exceptions.
+
+- type definition + default value::
+
+ "def_bool"/"def_tristate" <expr> ["if" <expr>]
+
+ This is a shorthand notation for a type definition plus a value.
+ Optionally dependencies for this default value can be added with "if".
+
+- dependencies: "depends on" <expr>
+
+ This defines a dependency for this menu entry. If multiple
+ dependencies are defined, they are connected with '&&'. Dependencies
+ are applied to all other options within this menu entry (which also
+ accept an "if" expression), so these two examples are equivalent::
+
+ bool "foo" if BAR
+ default y if BAR
+
+ and::
+
+ depends on BAR
+ bool "foo"
+ default y
+
+- reverse dependencies: "select" <symbol> ["if" <expr>]
+
+ While normal dependencies reduce the upper limit of a symbol (see
+ below), reverse dependencies can be used to force a lower limit of
+ another symbol. The value of the current menu symbol is used as the
+ minimal value <symbol> can be set to. If <symbol> is selected multiple
+ times, the limit is set to the largest selection.
+ Reverse dependencies can only be used with boolean or tristate
+ symbols.
+
+ Note:
+ select should be used with care. select will force
+ a symbol to a value without visiting the dependencies.
+ By abusing select you are able to select a symbol FOO even
+ if FOO depends on BAR that is not set.
+ In general use select only for non-visible symbols
+ (no prompts anywhere) and for symbols with no dependencies.
+ That will limit the usefulness but on the other hand avoid
+ the illegal configurations all over.
+
+- weak reverse dependencies: "imply" <symbol> ["if" <expr>]
+
+ This is similar to "select" as it enforces a lower limit on another
+ symbol except that the "implied" symbol's value may still be set to n
+ from a direct dependency or with a visible prompt.
+
+ Given the following example::
+
+ config FOO
+ tristate
+ imply BAZ
+
+ config BAZ
+ tristate
+ depends on BAR
+
+ The following values are possible:
+
+ === === ============= ==============
+ FOO BAR BAZ's default choice for BAZ
+ === === ============= ==============
+ n y n N/m/y
+ m y m M/y/n
+ y y y Y/n
+ y n * N
+ === === ============= ==============
+
+ This is useful e.g. with multiple drivers that want to indicate their
+ ability to hook into a secondary subsystem while allowing the user to
+ configure that subsystem out without also having to unset these drivers.
+
+- limiting menu display: "visible if" <expr>
+
+ This attribute is only applicable to menu blocks, if the condition is
+ false, the menu block is not displayed to the user (the symbols
+ contained there can still be selected by other symbols, though). It is
+ similar to a conditional "prompt" attribute for individual menu
+ entries. Default value of "visible" is true.
+
+- numerical ranges: "range" <symbol> <symbol> ["if" <expr>]
+
+ This allows to limit the range of possible input values for int
+ and hex symbols. The user can only input a value which is larger than
+ or equal to the first symbol and smaller than or equal to the second
+ symbol.
+
+- help text: "help" or "---help---"
+
+ This defines a help text. The end of the help text is determined by
+ the indentation level, this means it ends at the first line which has
+ a smaller indentation than the first line of the help text.
+ "---help---" and "help" do not differ in behaviour, "---help---" is
+ used to help visually separate configuration logic from help within
+ the file as an aid to developers.
+
+- misc options: "option" <symbol>[=<value>]
+
+ Various less common options can be defined via this option syntax,
+ which can modify the behaviour of the menu entry and its config
+ symbol. These options are currently possible:
+
+ - "defconfig_list"
+ This declares a list of default entries which can be used when
+ looking for the default configuration (which is used when the main
+ .config doesn't exists yet.)
+
+ - "modules"
+ This declares the symbol to be used as the MODULES symbol, which
+ enables the third modular state for all config symbols.
+ At most one symbol may have the "modules" option set.
+
+ - "allnoconfig_y"
+ This declares the symbol as one that should have the value y when
+ using "allnoconfig". Used for symbols that hide other symbols.
+
+Menu dependencies
+-----------------
+
+Dependencies define the visibility of a menu entry and can also reduce
+the input range of tristate symbols. The tristate logic used in the
+expressions uses one more state than normal boolean logic to express the
+module state. Dependency expressions have the following syntax::
+
+ <expr> ::= <symbol> (1)
+ <symbol> '=' <symbol> (2)
+ <symbol> '!=' <symbol> (3)
+ <symbol1> '<' <symbol2> (4)
+ <symbol1> '>' <symbol2> (4)
+ <symbol1> '<=' <symbol2> (4)
+ <symbol1> '>=' <symbol2> (4)
+ '(' <expr> ')' (5)
+ '!' <expr> (6)
+ <expr> '&&' <expr> (7)
+ <expr> '||' <expr> (8)
+
+Expressions are listed in decreasing order of precedence.
+
+(1) Convert the symbol into an expression. Boolean and tristate symbols
+ are simply converted into the respective expression values. All
+ other symbol types result in 'n'.
+(2) If the values of both symbols are equal, it returns 'y',
+ otherwise 'n'.
+(3) If the values of both symbols are equal, it returns 'n',
+ otherwise 'y'.
+(4) If value of <symbol1> is respectively lower, greater, lower-or-equal,
+ or greater-or-equal than value of <symbol2>, it returns 'y',
+ otherwise 'n'.
+(5) Returns the value of the expression. Used to override precedence.
+(6) Returns the result of (2-/expr/).
+(7) Returns the result of min(/expr/, /expr/).
+(8) Returns the result of max(/expr/, /expr/).
+
+An expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2
+respectively for calculations). A menu entry becomes visible when its
+expression evaluates to 'm' or 'y'.
+
+There are two types of symbols: constant and non-constant symbols.
+Non-constant symbols are the most common ones and are defined with the
+'config' statement. Non-constant symbols consist entirely of alphanumeric
+characters or underscores.
+Constant symbols are only part of expressions. Constant symbols are
+always surrounded by single or double quotes. Within the quote, any
+other character is allowed and the quotes can be escaped using '\'.
+
+Menu structure
+--------------
+
+The position of a menu entry in the tree is determined in two ways. First
+it can be specified explicitly::
+
+ menu "Network device support"
+ depends on NET
+
+ config NETDEVICES
+ ...
+
+ endmenu
+
+All entries within the "menu" ... "endmenu" block become a submenu of
+"Network device support". All subentries inherit the dependencies from
+the menu entry, e.g. this means the dependency "NET" is added to the
+dependency list of the config option NETDEVICES.
+
+The other way to generate the menu structure is done by analyzing the
+dependencies. If a menu entry somehow depends on the previous entry, it
+can be made a submenu of it. First, the previous (parent) symbol must
+be part of the dependency list and then one of these two conditions
+must be true:
+
+- the child entry must become invisible, if the parent is set to 'n'
+- the child entry must only be visible, if the parent is visible::
+
+ config MODULES
+ bool "Enable loadable module support"
+
+ config MODVERSIONS
+ bool "Set version information on all module symbols"
+ depends on MODULES
+
+ comment "module support disabled"
+ depends on !MODULES
+
+MODVERSIONS directly depends on MODULES, this means it's only visible if
+MODULES is different from 'n'. The comment on the other hand is only
+visible when MODULES is set to 'n'.
+
+
+Kconfig syntax
+--------------
+
+The configuration file describes a series of menu entries, where every
+line starts with a keyword (except help texts). The following keywords
+end a menu entry:
+
+- config
+- menuconfig
+- choice/endchoice
+- comment
+- menu/endmenu
+- if/endif
+- source
+
+The first five also start the definition of a menu entry.
+
+config::
+
+ "config" <symbol>
+ <config options>
+
+This defines a config symbol <symbol> and accepts any of above
+attributes as options.
+
+menuconfig::
+
+ "menuconfig" <symbol>
+ <config options>
+
+This is similar to the simple config entry above, but it also gives a
+hint to front ends, that all suboptions should be displayed as a
+separate list of options. To make sure all the suboptions will really
+show up under the menuconfig entry and not outside of it, every item
+from the <config options> list must depend on the menuconfig symbol.
+In practice, this is achieved by using one of the next two constructs::
+
+ (1):
+ menuconfig M
+ if M
+ config C1
+ config C2
+ endif
+
+ (2):
+ menuconfig M
+ config C1
+ depends on M
+ config C2
+ depends on M
+
+In the following examples (3) and (4), C1 and C2 still have the M
+dependency, but will not appear under menuconfig M anymore, because
+of C0, which doesn't depend on M::
+
+ (3):
+ menuconfig M
+ config C0
+ if M
+ config C1
+ config C2
+ endif
+
+ (4):
+ menuconfig M
+ config C0
+ config C1
+ depends on M
+ config C2
+ depends on M
+
+choices::
+
+ "choice" [symbol]
+ <choice options>
+ <choice block>
+ "endchoice"
+
+This defines a choice group and accepts any of the above attributes as
+options. A choice can only be of type bool or tristate. If no type is
+specified for a choice, its type will be determined by the type of
+the first choice element in the group or remain unknown if none of the
+choice elements have a type specified, as well.
+
+While a boolean choice only allows a single config entry to be
+selected, a tristate choice also allows any number of config entries
+to be set to 'm'. This can be used if multiple drivers for a single
+hardware exists and only a single driver can be compiled/loaded into
+the kernel, but all drivers can be compiled as modules.
+
+A choice accepts another option "optional", which allows to set the
+choice to 'n' and no entry needs to be selected.
+If no [symbol] is associated with a choice, then you can not have multiple
+definitions of that choice. If a [symbol] is associated to the choice,
+then you may define the same choice (i.e. with the same entries) in another
+place.
+
+comment::
+
+ "comment" <prompt>
+ <comment options>
+
+This defines a comment which is displayed to the user during the
+configuration process and is also echoed to the output files. The only
+possible options are dependencies.
+
+menu::
+
+ "menu" <prompt>
+ <menu options>
+ <menu block>
+ "endmenu"
+
+This defines a menu block, see "Menu structure" above for more
+information. The only possible options are dependencies and "visible"
+attributes.
+
+if::
+
+ "if" <expr>
+ <if block>
+ "endif"
+
+This defines an if block. The dependency expression <expr> is appended
+to all enclosed menu entries.
+
+source::
+
+ "source" <prompt>
+
+This reads the specified configuration file. This file is always parsed.
+
+mainmenu::
+
+ "mainmenu" <prompt>
+
+This sets the config program's title bar if the config program chooses
+to use it. It should be placed at the top of the configuration, before any
+other statement.
+
+'#' Kconfig source file comment:
+
+An unquoted '#' character anywhere in a source file line indicates
+the beginning of a source file comment. The remainder of that line
+is a comment.
+
+
+Kconfig hints
+-------------
+This is a collection of Kconfig tips, most of which aren't obvious at
+first glance and most of which have become idioms in several Kconfig
+files.
+
+Adding common features and make the usage configurable
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+It is a common idiom to implement a feature/functionality that are
+relevant for some architectures but not all.
+The recommended way to do so is to use a config variable named HAVE_*
+that is defined in a common Kconfig file and selected by the relevant
+architectures.
+An example is the generic IOMAP functionality.
+
+We would in lib/Kconfig see::
+
+ # Generic IOMAP is used to ...
+ config HAVE_GENERIC_IOMAP
+
+ config GENERIC_IOMAP
+ depends on HAVE_GENERIC_IOMAP && FOO
+
+And in lib/Makefile we would see::
+
+ obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
+
+For each architecture using the generic IOMAP functionality we would see::
+
+ config X86
+ select ...
+ select HAVE_GENERIC_IOMAP
+ select ...
+
+Note: we use the existing config option and avoid creating a new
+config variable to select HAVE_GENERIC_IOMAP.
+
+Note: the use of the internal config variable HAVE_GENERIC_IOMAP, it is
+introduced to overcome the limitation of select which will force a
+config option to 'y' no matter the dependencies.
+The dependencies are moved to the symbol GENERIC_IOMAP and we avoid the
+situation where select forces a symbol equals to 'y'.
+
+Adding features that need compiler support
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are several features that need compiler support. The recommended way
+to describe the dependency on the compiler feature is to use "depends on"
+followed by a test macro::
+
+ config STACKPROTECTOR
+ bool "Stack Protector buffer overflow detection"
+ depends on $(cc-option,-fstack-protector)
+ ...
+
+If you need to expose a compiler capability to makefiles and/or C source files,
+`CC_HAS_` is the recommended prefix for the config option::
+
+ config CC_HAS_STACKPROTECTOR_NONE
+ def_bool $(cc-option,-fno-stack-protector)
+
+Build as module only
+~~~~~~~~~~~~~~~~~~~~
+To restrict a component build to module-only, qualify its config symbol
+with "depends on m". E.g.::
+
+ config FOO
+ depends on BAR && m
+
+limits FOO to module (=m) or disabled (=n).
+
+Kconfig recursive dependency limitations
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you've hit the Kconfig error: "recursive dependency detected" you've run
+into a recursive dependency issue with Kconfig, a recursive dependency can be
+summarized as a circular dependency. The kconfig tools need to ensure that
+Kconfig files comply with specified configuration requirements. In order to do
+that kconfig must determine the values that are possible for all Kconfig
+symbols, this is currently not possible if there is a circular relation
+between two or more Kconfig symbols. For more details refer to the "Simple
+Kconfig recursive issue" subsection below. Kconfig does not do recursive
+dependency resolution; this has a few implications for Kconfig file writers.
+We'll first explain why this issues exists and then provide an example
+technical limitation which this brings upon Kconfig developers. Eager
+developers wishing to try to address this limitation should read the next
+subsections.
+
+Simple Kconfig recursive issue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Read: Documentation/kbuild/Kconfig.recursion-issue-01
+
+Test with::
+
+ make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-01 allnoconfig
+
+Cumulative Kconfig recursive issue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Read: Documentation/kbuild/Kconfig.recursion-issue-02
+
+Test with::
+
+ make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-02 allnoconfig
+
+Practical solutions to kconfig recursive issue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Developers who run into the recursive Kconfig issue have two options
+at their disposal. We document them below and also provide a list of
+historical issues resolved through these different solutions.
+
+ a) Remove any superfluous "select FOO" or "depends on FOO"
+ b) Match dependency semantics:
+
+ b1) Swap all "select FOO" to "depends on FOO" or,
+
+ b2) Swap all "depends on FOO" to "select FOO"
+
+The resolution to a) can be tested with the sample Kconfig file
+Documentation/kbuild/Kconfig.recursion-issue-01 through the removal
+of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already
+since CORE_BELL_A depends on CORE. At times it may not be possible to remove
+some dependency criteria, for such cases you can work with solution b).
+
+The two different resolutions for b) can be tested in the sample Kconfig file
+Documentation/kbuild/Kconfig.recursion-issue-02.
+
+Below is a list of examples of prior fixes for these types of recursive issues;
+all errors appear to involve one or more select's and one or more "depends on".
+
+============ ===================================
+commit fix
+============ ===================================
+06b718c01208 select A -> depends on A
+c22eacfe82f9 depends on A -> depends on B
+6a91e854442c select A -> depends on A
+118c565a8f2e select A -> select B
+f004e5594705 select A -> depends on A
+c7861f37b4c6 depends on A -> (null)
+80c69915e5fb select A -> (null) (1)
+c2218e26c0d0 select A -> depends on A (1)
+d6ae99d04e1c select A -> depends on A
+95ca19cf8cbf select A -> depends on A
+8f057d7bca54 depends on A -> (null)
+8f057d7bca54 depends on A -> select A
+a0701f04846e select A -> depends on A
+0c8b92f7f259 depends on A -> (null)
+e4e9e0540928 select A -> depends on A (2)
+7453ea886e87 depends on A > (null) (1)
+7b1fff7e4fdf select A -> depends on A
+86c747d2a4f0 select A -> depends on A
+d9f9ab51e55e select A -> depends on A
+0c51a4d8abd6 depends on A -> select A (3)
+e98062ed6dc4 select A -> depends on A (3)
+91e5d284a7f1 select A -> (null)
+============ ===================================
+
+(1) Partial (or no) quote of error.
+(2) That seems to be the gist of that fix.
+(3) Same error.
+
+Future kconfig work
+~~~~~~~~~~~~~~~~~~~
+
+Work on kconfig is welcomed on both areas of clarifying semantics and on
+evaluating the use of a full SAT solver for it. A full SAT solver can be
+desirable to enable more complex dependency mappings and / or queries,
+for instance on possible use case for a SAT solver could be that of handling
+the current known recursive dependency issues. It is not known if this would
+address such issues but such evaluation is desirable. If support for a full SAT
+solver proves too complex or that it cannot address recursive dependency issues
+Kconfig should have at least clear and well defined semantics which also
+addresses and documents limitations or requirements such as the ones dealing
+with recursive dependencies.
+
+Further work on both of these areas is welcomed on Kconfig. We elaborate
+on both of these in the next two subsections.
+
+Semantics of Kconfig
+~~~~~~~~~~~~~~~~~~~~
+
+The use of Kconfig is broad, Linux is now only one of Kconfig's users:
+one study has completed a broad analysis of Kconfig use in 12 projects [0]_.
+Despite its widespread use, and although this document does a reasonable job
+in documenting basic Kconfig syntax a more precise definition of Kconfig
+semantics is welcomed. One project deduced Kconfig semantics through
+the use of the xconfig configurator [1]_. Work should be done to confirm if
+the deduced semantics matches our intended Kconfig design goals.
+
+Having well defined semantics can be useful for tools for practical
+evaluation of depenencies, for instance one such use known case was work to
+express in boolean abstraction of the inferred semantics of Kconfig to
+translate Kconfig logic into boolean formulas and run a SAT solver on this to
+find dead code / features (always inactive), 114 dead features were found in
+Linux using this methodology [1]_ (Section 8: Threats to validity).
+
+Confirming this could prove useful as Kconfig stands as one of the the leading
+industrial variability modeling languages [1]_ [2]_. Its study would help
+evaluate practical uses of such languages, their use was only theoretical
+and real world requirements were not well understood. As it stands though
+only reverse engineering techniques have been used to deduce semantics from
+variability modeling languages such as Kconfig [3]_.
+
+.. [0] http://www.eng.uwaterloo.ca/~shshe/kconfig_semantics.pdf
+.. [1] http://gsd.uwaterloo.ca/sites/default/files/vm-2013-berger.pdf
+.. [2] http://gsd.uwaterloo.ca/sites/default/files/ase241-berger_0.pdf
+.. [3] http://gsd.uwaterloo.ca/sites/default/files/icse2011.pdf
+
+Full SAT solver for Kconfig
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Although SAT solvers [4]_ haven't yet been used by Kconfig directly, as noted
+in the previous subsection, work has been done however to express in boolean
+abstraction the inferred semantics of Kconfig to translate Kconfig logic into
+boolean formulas and run a SAT solver on it [5]_. Another known related project
+is CADOS [6]_ (former VAMOS [7]_) and the tools, mainly undertaker [8]_, which
+has been introduced first with [9]_. The basic concept of undertaker is to
+exract variability models from Kconfig, and put them together with a
+propositional formula extracted from CPP #ifdefs and build-rules into a SAT
+solver in order to find dead code, dead files, and dead symbols. If using a SAT
+solver is desirable on Kconfig one approach would be to evaluate repurposing
+such efforts somehow on Kconfig. There is enough interest from mentors of
+existing projects to not only help advise how to integrate this work upstream
+but also help maintain it long term. Interested developers should visit:
+
+http://kernelnewbies.org/KernelProjects/kconfig-sat
+
+.. [4] http://www.cs.cornell.edu/~sabhar/chapters/SATSolvers-KR-Handbook.pdf
+.. [5] http://gsd.uwaterloo.ca/sites/default/files/vm-2013-berger.pdf
+.. [6] https://cados.cs.fau.de
+.. [7] https://vamos.cs.fau.de
+.. [8] https://undertaker.cs.fau.de
+.. [9] https://www4.cs.fau.de/Publications/2011/tartler_11_eurosys.pdf
deleted file mode 100644
@@ -1,395 +0,0 @@
-Introduction
-------------
-
-The configuration database is a collection of configuration options
-organized in a tree structure:
-
- +- Code maturity level options
- | +- Prompt for development and/or incomplete code/drivers
- +- General setup
- | +- Networking support
- | +- System V IPC
- | +- BSD Process Accounting
- | +- Sysctl support
- +- Loadable module support
- | +- Enable loadable module support
- | +- Set version information on all module symbols
- | +- Kernel module loader
- +- ...
-
-Every entry has its own dependencies. These dependencies are used
-to determine the visibility of an entry. Any child entry is only
-visible if its parent entry is also visible.
-
-Menu entries
-------------
-
-Most entries define a config option; all other entries help to organize
-them. A single configuration option is defined like this:
-
-config MODVERSIONS
- bool "Set version information on all module symbols"
- depends on MODULES
- help
- Usually, modules have to be recompiled whenever you switch to a new
- kernel. ...
-
-Every line starts with a key word and can be followed by multiple
-arguments. "config" starts a new config entry. The following lines
-define attributes for this config option. Attributes can be the type of
-the config option, input prompt, dependencies, help text and default
-values. A config option can be defined multiple times with the same
-name, but every definition can have only a single input prompt and the
-type must not conflict.
-
-Menu attributes
----------------
-
-A menu entry can have a number of attributes. Not all of them are
-applicable everywhere (see syntax).
-
-- type definition: "bool"/"tristate"/"string"/"hex"/"int"
- Every config option must have a type. There are only two basic types:
- tristate and string; the other types are based on these two. The type
- definition optionally accepts an input prompt, so these two examples
- are equivalent:
-
- bool "Networking support"
- and
- bool
- prompt "Networking support"
-
-- input prompt: "prompt" <prompt> ["if" <expr>]
- Every menu entry can have at most one prompt, which is used to display
- to the user. Optionally dependencies only for this prompt can be added
- with "if".
-
-- default value: "default" <expr> ["if" <expr>]
- A config option can have any number of default values. If multiple
- default values are visible, only the first defined one is active.
- Default values are not limited to the menu entry where they are
- defined. This means the default can be defined somewhere else or be
- overridden by an earlier definition.
- The default value is only assigned to the config symbol if no other
- value was set by the user (via the input prompt above). If an input
- prompt is visible the default value is presented to the user and can
- be overridden by him.
- Optionally, dependencies only for this default value can be added with
- "if".
-
-- type definition + default value:
- "def_bool"/"def_tristate" <expr> ["if" <expr>]
- This is a shorthand notation for a type definition plus a value.
- Optionally dependencies for this default value can be added with "if".
-
-- dependencies: "depends on" <expr>
- This defines a dependency for this menu entry. If multiple
- dependencies are defined, they are connected with '&&'. Dependencies
- are applied to all other options within this menu entry (which also
- accept an "if" expression), so these two examples are equivalent:
-
- bool "foo" if BAR
- default y if BAR
- and
- depends on BAR
- bool "foo"
- default y
-
-- reverse dependencies: "select" <symbol> ["if" <expr>]
- While normal dependencies reduce the upper limit of a symbol (see
- below), reverse dependencies can be used to force a lower limit of
- another symbol. The value of the current menu symbol is used as the
- minimal value <symbol> can be set to. If <symbol> is selected multiple
- times, the limit is set to the largest selection.
- Reverse dependencies can only be used with boolean or tristate
- symbols.
- Note:
- select should be used with care. select will force
- a symbol to a value without visiting the dependencies.
- By abusing select you are able to select a symbol FOO even
- if FOO depends on BAR that is not set.
- In general use select only for non-visible symbols
- (no prompts anywhere) and for symbols with no dependencies.
- That will limit the usefulness but on the other hand avoid
- the illegal configurations all over.
-
-- limiting menu display: "visible if" <expr>
- This attribute is only applicable to menu blocks, if the condition is
- false, the menu block is not displayed to the user (the symbols
- contained there can still be selected by other symbols, though). It is
- similar to a conditional "prompt" attribute for individual menu
- entries. Default value of "visible" is true.
-
-- numerical ranges: "range" <symbol> <symbol> ["if" <expr>]
- This allows to limit the range of possible input values for int
- and hex symbols. The user can only input a value which is larger than
- or equal to the first symbol and smaller than or equal to the second
- symbol.
-
-- help text: "help" or "---help---"
- This defines a help text. The end of the help text is determined by
- the indentation level, this means it ends at the first line which has
- a smaller indentation than the first line of the help text.
- "---help---" and "help" do not differ in behaviour, "---help---" is
- used to help visually separate configuration logic from help within
- the file as an aid to developers.
-
-- misc options: "option" <symbol>[=<value>]
- Various less common options can be defined via this option syntax,
- which can modify the behaviour of the menu entry and its config
- symbol. These options are currently possible:
-
- - "defconfig_list"
- This declares a list of default entries which can be used when
- looking for the default configuration (which is used when the main
- .config doesn't exists yet.)
-
- - "modules"
- This declares the symbol to be used as the MODULES symbol, which
- enables the third modular state for all config symbols.
- At most one symbol may have the "modules" option set.
-
- - "env"=<value>
- This imports the environment variable into Kconfig. It behaves like
- a default, except that the value comes from the environment, this
- also means that the behaviour when mixing it with normal defaults is
- undefined at this point. The symbol is currently not exported back
- to the build environment (if this is desired, it can be done via
- another symbol).
-
- - "allnoconfig_y"
- This declares the symbol as one that should have the value y when
- using "allnoconfig". Used for symbols that hide other symbols.
-
-Menu dependencies
------------------
-
-Dependencies define the visibility of a menu entry and can also reduce
-the input range of tristate symbols. The tristate logic used in the
-expressions uses one more state than normal boolean logic to express the
-module state. Dependency expressions have the following syntax:
-
-<expr> ::= <symbol> (1)
- <symbol> '=' <symbol> (2)
- <symbol> '!=' <symbol> (3)
- '(' <expr> ')' (4)
- '!' <expr> (5)
- <expr> '&&' <expr> (6)
- <expr> '||' <expr> (7)
-
-Expressions are listed in decreasing order of precedence.
-
-(1) Convert the symbol into an expression. Boolean and tristate symbols
- are simply converted into the respective expression values. All
- other symbol types result in 'n'.
-(2) If the values of both symbols are equal, it returns 'y',
- otherwise 'n'.
-(3) If the values of both symbols are equal, it returns 'n',
- otherwise 'y'.
-(4) Returns the value of the expression. Used to override precedence.
-(5) Returns the result of (2-/expr/).
-(6) Returns the result of min(/expr/, /expr/).
-(7) Returns the result of max(/expr/, /expr/).
-
-An expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2
-respectively for calculations). A menu entry becomes visible when its
-expression evaluates to 'm' or 'y'.
-
-There are two types of symbols: constant and non-constant symbols.
-Non-constant symbols are the most common ones and are defined with the
-'config' statement. Non-constant symbols consist entirely of alphanumeric
-characters or underscores.
-Constant symbols are only part of expressions. Constant symbols are
-always surrounded by single or double quotes. Within the quote, any
-other character is allowed and the quotes can be escaped using '\'.
-
-Menu structure
---------------
-
-The position of a menu entry in the tree is determined in two ways. First
-it can be specified explicitly:
-
-menu "Network device support"
- depends on NET
-
-config NETDEVICES
- ...
-
-endmenu
-
-All entries within the "menu" ... "endmenu" block become a submenu of
-"Network device support". All subentries inherit the dependencies from
-the menu entry, e.g. this means the dependency "NET" is added to the
-dependency list of the config option NETDEVICES.
-
-The other way to generate the menu structure is done by analyzing the
-dependencies. If a menu entry somehow depends on the previous entry, it
-can be made a submenu of it. First, the previous (parent) symbol must
-be part of the dependency list and then one of these two conditions
-must be true:
-- the child entry must become invisible, if the parent is set to 'n'
-- the child entry must only be visible, if the parent is visible
-
-config MODULES
- bool "Enable loadable module support"
-
-config MODVERSIONS
- bool "Set version information on all module symbols"
- depends on MODULES
-
-comment "module support disabled"
- depends on !MODULES
-
-MODVERSIONS directly depends on MODULES, this means it's only visible if
-MODULES is different from 'n'. The comment on the other hand is always
-visible when MODULES is visible (the (empty) dependency of MODULES is
-also part of the comment dependencies).
-
-
-Kconfig syntax
---------------
-
-The configuration file describes a series of menu entries, where every
-line starts with a keyword (except help texts). The following keywords
-end a menu entry:
-- config
-- menuconfig
-- choice/endchoice
-- comment
-- menu/endmenu
-- if/endif
-- source
-The first five also start the definition of a menu entry.
-
-config:
-
- "config" <symbol>
- <config options>
-
-This defines a config symbol <symbol> and accepts any of above
-attributes as options.
-
-menuconfig:
- "menuconfig" <symbol>
- <config options>
-
-This is similar to the simple config entry above, but it also gives a
-hint to front ends, that all suboptions should be displayed as a
-separate list of options.
-
-choices:
-
- "choice" [symbol]
- <choice options>
- <choice block>
- "endchoice"
-
-This defines a choice group and accepts any of the above attributes as
-options. A choice can only be of type bool or tristate, while a boolean
-choice only allows a single config entry to be selected, a tristate
-choice also allows any number of config entries to be set to 'm'. This
-can be used if multiple drivers for a single hardware exists and only a
-single driver can be compiled/loaded into the kernel, but all drivers
-can be compiled as modules.
-A choice accepts another option "optional", which allows to set the
-choice to 'n' and no entry needs to be selected.
-If no [symbol] is associated with a choice, then you can not have multiple
-definitions of that choice. If a [symbol] is associated to the choice,
-then you may define the same choice (ie. with the same entries) in another
-place.
-
-comment:
-
- "comment" <prompt>
- <comment options>
-
-This defines a comment which is displayed to the user during the
-configuration process and is also echoed to the output files. The only
-possible options are dependencies.
-
-menu:
-
- "menu" <prompt>
- <menu options>
- <menu block>
- "endmenu"
-
-This defines a menu block, see "Menu structure" above for more
-information. The only possible options are dependencies and "visible"
-attributes.
-
-if:
-
- "if" <expr>
- <if block>
- "endif"
-
-This defines an if block. The dependency expression <expr> is appended
-to all enclosed menu entries.
-
-source:
-
- "source" <prompt>
-
-This reads the specified configuration file. This file is always parsed.
-
-mainmenu:
-
- "mainmenu" <prompt>
-
-This sets the config program's title bar if the config program chooses
-to use it. It should be placed at the top of the configuration, before any
-other statement.
-
-
-Kconfig hints
--------------
-This is a collection of Kconfig tips, most of which aren't obvious at
-first glance and most of which have become idioms in several Kconfig
-files.
-
-Adding common features and make the usage configurable
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-It is a common idiom to implement a feature/functionality that are
-relevant for some architectures but not all.
-The recommended way to do so is to use a config variable named HAVE_*
-that is defined in a common Kconfig file and selected by the relevant
-architectures.
-An example is the generic IOMAP functionality.
-
-We would in lib/Kconfig see:
-
-# Generic IOMAP is used to ...
-config HAVE_GENERIC_IOMAP
-
-config GENERIC_IOMAP
- depends on HAVE_GENERIC_IOMAP && FOO
-
-And in lib/Makefile we would see:
-obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
-
-For each architecture using the generic IOMAP functionality we would see:
-
-config X86
- select ...
- select HAVE_GENERIC_IOMAP
- select ...
-
-Note: we use the existing config option and avoid creating a new
-config variable to select HAVE_GENERIC_IOMAP.
-
-Note: the use of the internal config variable HAVE_GENERIC_IOMAP, it is
-introduced to overcome the limitation of select which will force a
-config option to 'y' no matter the dependencies.
-The dependencies are moved to the symbol GENERIC_IOMAP and we avoid the
-situation where select forces a symbol equals to 'y'.
-
-Build as module only
-~~~~~~~~~~~~~~~~~~~~
-To restrict a component build to module-only, qualify its config symbol
-with "depends on m". E.g.:
-
-config FOO
- depends on BAR && m
-
-limits FOO to module (=m) or disabled (=n).
new file mode 100644
@@ -0,0 +1,247 @@
+======================
+Kconfig macro language
+======================
+
+Concept
+-------
+
+The basic idea was inspired by Make. When we look at Make, we notice sort of
+two languages in one. One language describes dependency graphs consisting of
+targets and prerequisites. The other is a macro language for performing textual
+substitution.
+
+There is clear distinction between the two language stages. For example, you
+can write a makefile like follows::
+
+ APP := foo
+ SRC := foo.c
+ CC := gcc
+
+ $(APP): $(SRC)
+ $(CC) -o $(APP) $(SRC)
+
+The macro language replaces the variable references with their expanded form,
+and handles as if the source file were input like follows::
+
+ foo: foo.c
+ gcc -o foo foo.c
+
+Then, Make analyzes the dependency graph and determines the targets to be
+updated.
+
+The idea is quite similar in Kconfig - it is possible to describe a Kconfig
+file like this::
+
+ CC := gcc
+
+ config CC_HAS_FOO
+ def_bool $(shell, $(srctree)/scripts/gcc-check-foo.sh $(CC))
+
+The macro language in Kconfig processes the source file into the following
+intermediate::
+
+ config CC_HAS_FOO
+ def_bool y
+
+Then, Kconfig moves onto the evaluation stage to resolve inter-symbol
+dependency as explained in kconfig-language.txt.
+
+
+Variables
+---------
+
+Like in Make, a variable in Kconfig works as a macro variable. A macro
+variable is expanded "in place" to yield a text string that may then be
+expanded further. To get the value of a variable, enclose the variable name in
+$( ). The parentheses are required even for single-letter variable names; $X is
+a syntax error. The curly brace form as in ${CC} is not supported either.
+
+There are two types of variables: simply expanded variables and recursively
+expanded variables.
+
+A simply expanded variable is defined using the := assignment operator. Its
+righthand side is expanded immediately upon reading the line from the Kconfig
+file.
+
+A recursively expanded variable is defined using the = assignment operator.
+Its righthand side is simply stored as the value of the variable without
+expanding it in any way. Instead, the expansion is performed when the variable
+is used.
+
+There is another type of assignment operator; += is used to append text to a
+variable. The righthand side of += is expanded immediately if the lefthand
+side was originally defined as a simple variable. Otherwise, its evaluation is
+deferred.
+
+The variable reference can take parameters, in the following form::
+
+ $(name,arg1,arg2,arg3)
+
+You can consider the parameterized reference as a function. (more precisely,
+"user-defined function" in contrast to "built-in function" listed below).
+
+Useful functions must be expanded when they are used since the same function is
+expanded differently if different parameters are passed. Hence, a user-defined
+function is defined using the = assignment operator. The parameters are
+referenced within the body definition with $(1), $(2), etc.
+
+In fact, recursively expanded variables and user-defined functions are the same
+internally. (In other words, "variable" is "function with zero argument".)
+When we say "variable" in a broad sense, it includes "user-defined function".
+
+
+Built-in functions
+------------------
+
+Like Make, Kconfig provides several built-in functions. Every function takes a
+particular number of arguments.
+
+In Make, every built-in function takes at least one argument. Kconfig allows
+zero argument for built-in functions, such as $(fileno), $(lineno). You could
+consider those as "built-in variable", but it is just a matter of how we call
+it after all. Let's say "built-in function" here to refer to natively supported
+functionality.
+
+Kconfig currently supports the following built-in functions.
+
+ - $(shell,command)
+
+ The "shell" function accepts a single argument that is expanded and passed
+ to a subshell for execution. The standard output of the command is then read
+ and returned as the value of the function. Every newline in the output is
+ replaced with a space. Any trailing newlines are deleted. The standard error
+ is not returned, nor is any program exit status.
+
+ - $(info,text)
+
+ The "info" function takes a single argument and prints it to stdout.
+ It evaluates to an empty string.
+
+ - $(warning-if,condition,text)
+
+ The "warning-if" function takes two arguments. If the condition part is "y",
+ the text part is sent to stderr. The text is prefixed with the name of the
+ current Kconfig file and the current line number.
+
+ - $(error-if,condition,text)
+
+ The "error-if" function is similar to "warning-if", but it terminates the
+ parsing immediately if the condition part is "y".
+
+ - $(filename)
+
+ The 'filename' takes no argument, and $(filename) is expanded to the file
+ name being parsed.
+
+ - $(lineno)
+
+ The 'lineno' takes no argument, and $(lineno) is expanded to the line number
+ being parsed.
+
+
+Make vs Kconfig
+---------------
+
+Kconfig adopts Make-like macro language, but the function call syntax is
+slightly different.
+
+A function call in Make looks like this::
+
+ $(func-name arg1,arg2,arg3)
+
+The function name and the first argument are separated by at least one
+whitespace. Then, leading whitespaces are trimmed from the first argument,
+while whitespaces in the other arguments are kept. You need to use a kind of
+trick to start the first parameter with spaces. For example, if you want
+to make "info" function print " hello", you can write like follows::
+
+ empty :=
+ space := $(empty) $(empty)
+ $(info $(space)$(space)hello)
+
+Kconfig uses only commas for delimiters, and keeps all whitespaces in the
+function call. Some people prefer putting a space after each comma delimiter::
+
+ $(func-name, arg1, arg2, arg3)
+
+In this case, "func-name" will receive " arg1", " arg2", " arg3". The presence
+of leading spaces may matter depending on the function. The same applies to
+Make - for example, $(subst .c, .o, $(sources)) is a typical mistake; it
+replaces ".c" with " .o".
+
+In Make, a user-defined function is referenced by using a built-in function,
+'call', like this::
+
+ $(call my-func,arg1,arg2,arg3)
+
+Kconfig invokes user-defined functions and built-in functions in the same way.
+The omission of 'call' makes the syntax shorter.
+
+In Make, some functions treat commas verbatim instead of argument separators.
+For example, $(shell echo hello, world) runs the command "echo hello, world".
+Likewise, $(info hello, world) prints "hello, world" to stdout. You could say
+this is _useful_ inconsistency.
+
+In Kconfig, for simpler implementation and grammatical consistency, commas that
+appear in the $( ) context are always delimiters. It means::
+
+ $(shell, echo hello, world)
+
+is an error because it is passing two parameters where the 'shell' function
+accepts only one. To pass commas in arguments, you can use the following trick::
+
+ comma := ,
+ $(shell, echo hello$(comma) world)
+
+
+Caveats
+-------
+
+A variable (or function) cannot be expanded across tokens. So, you cannot use
+a variable as a shorthand for an expression that consists of multiple tokens.
+The following works::
+
+ RANGE_MIN := 1
+ RANGE_MAX := 3
+
+ config FOO
+ int "foo"
+ range $(RANGE_MIN) $(RANGE_MAX)
+
+But, the following does not work::
+
+ RANGES := 1 3
+
+ config FOO
+ int "foo"
+ range $(RANGES)
+
+A variable cannot be expanded to any keyword in Kconfig. The following does
+not work::
+
+ MY_TYPE := tristate
+
+ config FOO
+ $(MY_TYPE) "foo"
+ default y
+
+Obviously from the design, $(shell command) is expanded in the textual
+substitution phase. You cannot pass symbols to the 'shell' function.
+
+The following does not work as expected::
+
+ config ENDIAN_FLAG
+ string
+ default "-mbig-endian" if CPU_BIG_ENDIAN
+ default "-mlittle-endian" if CPU_LITTLE_ENDIAN
+
+ config CC_HAS_ENDIAN_FLAG
+ def_bool $(shell $(srctree)/scripts/gcc-check-flag ENDIAN_FLAG)
+
+Instead, you can do like follows so that any function call is statically
+expanded::
+
+ config CC_HAS_ENDIAN_FLAG
+ bool
+ default $(shell $(srctree)/scripts/gcc-check-flag -mbig-endian) if CPU_BIG_ENDIAN
+ default $(shell $(srctree)/scripts/gcc-check-flag -mlittle-endian) if CPU_LITTLE_ENDIAN
similarity index 70%
rename from docs/misc/kconfig.txt
rename to docs/misc/kconfig.rst
@@ -1,14 +1,17 @@
-This file contains some assistance for using "make *config".
+===================
+Kconfig make config
+===================
+
+This file contains some assistance for using `make *config`.
Use "make help" to list all of the possible configuration targets.
-The xconfig ('qconf') and menuconfig ('mconf') programs also
-have embedded help text. Be sure to check it for navigation,
-search, and other general help text.
+The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf')
+programs also have embedded help text. Be sure to check that for
+navigation, search, and other general help text.
-======================================================================
General
---------------------------------------------------
+-------
New kernel releases often introduce new config symbols. Often more
important, new kernel releases may rename config symbols. When
@@ -17,48 +20,55 @@ this happens, using a previously working .config file and running
for you, so you may find that you need to see what NEW kernel
symbols have been introduced.
-To see a list of new config symbols when using "make oldconfig", use
+To see a list of new config symbols, use::
cp user/some/old.config .config
make listnewconfig
and the config program will list any new symbols, one per line.
+Alternatively, you can use the brute force method::
+
+ make oldconfig
scripts/diffconfig .config.old .config | less
-______________________________________________________________________
-Environment variables for '*config'
+----------------------------------------------------------------------
+
+Environment variables for `*config`
KCONFIG_CONFIG
---------------------------------------------------
+--------------
This environment variable can be used to specify a default kernel config
file name to override the default name of ".config".
KCONFIG_OVERWRITECONFIG
---------------------------------------------------
+-----------------------
If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
break symlinks when .config is a symlink to somewhere else.
-CONFIG_
---------------------------------------------------
-If you set CONFIG_ in the environment, Kconfig will prefix all symbols
+`CONFIG_`
+---------
+If you set `CONFIG_` in the environment, Kconfig will prefix all symbols
with its value when saving the configuration, instead of using the default,
-"CONFIG_".
+`CONFIG_`.
+
+----------------------------------------------------------------------
-______________________________________________________________________
Environment variables for '{allyes/allmod/allno/rand}config'
KCONFIG_ALLCONFIG
---------------------------------------------------
+-----------------
(partially based on lkml email from/by Rob Landley, re: miniconfig)
+
--------------------------------------------------
+
The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also
use the environment variable KCONFIG_ALLCONFIG as a flag or a filename
that contains config symbols that the user requires to be set to a
specific value. If KCONFIG_ALLCONFIG is used without a filename where
-KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", "make *config"
+KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", `make *config`
checks for a file named "all{yes/mod/no/def/random}.config"
-(corresponding to the *config command that was used) for symbol values
+(corresponding to the `*config` command that was used) for symbol values
that are to be forced. If this file is not found, it checks for a
file named "all.config" to contain forced values.
@@ -71,43 +81,55 @@ This 'KCONFIG_ALLCONFIG' file is a config file which contains
(usually a subset of all) preset config symbols. These variable
settings are still subject to normal dependency checks.
-Examples:
+Examples::
+
KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig
-or
+
+or::
+
KCONFIG_ALLCONFIG=mini.config make allnoconfig
-or
+
+or::
+
make KCONFIG_ALLCONFIG=mini.config allnoconfig
These examples will disable most options (allnoconfig) but enable or
disable the options that are explicitly listed in the specified
mini-config files.
-______________________________________________________________________
+----------------------------------------------------------------------
+
Environment variables for 'randconfig'
KCONFIG_SEED
---------------------------------------------------
+------------
You can set this to the integer value used to seed the RNG, if you want
to somehow debug the behaviour of the kconfig parser/frontends.
If not set, the current time will be used.
KCONFIG_PROBABILITY
---------------------------------------------------
+-------------------
This variable can be used to skew the probabilities. This variable can
be unset or empty, or set to three different formats:
+
+ ======================= ================== =====================
KCONFIG_PROBABILITY y:n split y:m:n split
- -----------------------------------------------------------------
+ ======================= ================== =====================
unset or empty 50 : 50 33 : 33 : 34
N N : 100-N N/2 : N/2 : 100-N
[1] N:M N+M : 100-(N+M) N : M : 100-(N+M)
[2] N:M:L N : 100-N M : L : 100-(M+L)
+ ======================= ================== =====================
where N, M and L are integers (in base 10) in the range [0,100], and so
that:
+
[1] N+M is in the range [0,100]
+
[2] M+L is in the range [0,100]
-Examples:
+Examples::
+
KCONFIG_PROBABILITY=10
10% of booleans will be set to 'y', 90% to 'n'
5% of tristates will be set to 'y', 5% to 'm', 90% to 'n'
@@ -118,34 +140,36 @@ Examples:
10% of booleans will be set to 'y', 90% to 'n'
15% of tristates will be set to 'y', 15% to 'm', 70% to 'n'
-______________________________________________________________________
-Environment variables for 'silentoldconfig'
+----------------------------------------------------------------------
+
+Environment variables for 'syncconfig'
KCONFIG_NOSILENTUPDATE
---------------------------------------------------
+----------------------
If this variable has a non-blank value, it prevents silent kernel
config updates (requires explicit updates).
KCONFIG_AUTOCONFIG
---------------------------------------------------
+------------------
This environment variable can be set to specify the path & name of the
"auto.conf" file. Its default value is "include/config/auto.conf".
KCONFIG_TRISTATE
---------------------------------------------------
+----------------
This environment variable can be set to specify the path & name of the
"tristate.conf" file. Its default value is "include/config/tristate.conf".
KCONFIG_AUTOHEADER
---------------------------------------------------
+------------------
This environment variable can be set to specify the path & name of the
"autoconf.h" (header) file.
Its default value is "include/generated/autoconf.h".
-======================================================================
+----------------------------------------------------------------------
+
menuconfig
---------------------------------------------------
+----------
SEARCHING for CONFIG symbols
@@ -155,56 +179,98 @@ Searching in menuconfig:
names, so you have to know something close to what you are
looking for.
- Example:
+ Example::
+
/hotplug
This lists all config symbols that contain "hotplug",
e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.
- For search help, enter / followed TAB-TAB-TAB (to highlight
+ For search help, enter / followed by TAB-TAB (to highlight
<Help>) and Enter. This will tell you that you can also use
regular expressions (regexes) in the search string, so if you
- are not interested in MEMORY_HOTPLUG, you could try
+ are not interested in MEMORY_HOTPLUG, you could try::
/^hotplug
When searching, symbols are sorted thus:
+
- first, exact matches, sorted alphabetically (an exact match
is when the search matches the complete symbol name);
- then, other matches, sorted alphabetically.
+
For example: ^ATH.K matches:
+
ATH5K ATH9K ATH5K_AHB ATH5K_DEBUG [...] ATH6KL ATH6KL_DEBUG
[...] ATH9K_AHB ATH9K_BTCOEX_SUPPORT ATH9K_COMMON [...]
+
of which only ATH5K and ATH9K match exactly and so are sorted
first (and in alphabetical order), then come all other symbols,
sorted in alphabetical order.
-______________________________________________________________________
+----------------------------------------------------------------------
+
User interface options for 'menuconfig'
MENUCONFIG_COLOR
---------------------------------------------------
+----------------
It is possible to select different color themes using the variable
-MENUCONFIG_COLOR. To select a theme use:
+MENUCONFIG_COLOR. To select a theme use::
make MENUCONFIG_COLOR=<theme> menuconfig
-Available themes are:
- mono => selects colors suitable for monochrome displays
- blackbg => selects a color scheme with black background
- classic => theme with blue background. The classic look
- bluetitle => a LCD friendly version of classic. (default)
+Available themes are::
+
+ - mono => selects colors suitable for monochrome displays
+ - blackbg => selects a color scheme with black background
+ - classic => theme with blue background. The classic look
+ - bluetitle => a LCD friendly version of classic. (default)
MENUCONFIG_MODE
---------------------------------------------------
+---------------
This mode shows all sub-menus in one large tree.
-Example:
+Example::
+
make MENUCONFIG_MODE=single_menu menuconfig
+----------------------------------------------------------------------
+
+nconfig
+-------
+
+nconfig is an alternate text-based configurator. It lists function
+keys across the bottom of the terminal (window) that execute commands.
+You can also just use the corresponding numeric key to execute the
+commands unless you are in a data entry window. E.g., instead of F6
+for Save, you can just press 6.
+
+Use F1 for Global help or F3 for the Short help menu.
+
+Searching in nconfig:
+
+ You can search either in the menu entry "prompt" strings
+ or in the configuration symbols.
+
+ Use / to begin a search through the menu entries. This does
+ not support regular expressions. Use <Down> or <Up> for
+ Next hit and Previous hit, respectively. Use <Esc> to
+ terminate the search mode.
+
+ F8 (SymSearch) searches the configuration symbols for the
+ given string or regular expression (regex).
+
+NCONFIG_MODE
+------------
+This mode shows all sub-menus in one large tree.
+
+Example::
+
+ make NCONFIG_MODE=single_menu nconfig
+
+----------------------------------------------------------------------
-======================================================================
xconfig
---------------------------------------------------
+-------
Searching in xconfig:
@@ -212,9 +278,12 @@ Searching in xconfig:
names, so you have to know something close to what you are
looking for.
- Example:
+ Example::
+
Ctrl-F hotplug
- or
+
+ or::
+
Menu: File, Search, hotplug
lists all config symbol entries that contain "hotplug" in
@@ -224,14 +293,12 @@ Searching in xconfig:
to return to the main menu.
-======================================================================
+----------------------------------------------------------------------
+
gconfig
---------------------------------------------------
+-------
Searching in gconfig:
- None (gconfig isn't maintained as well as xconfig or menuconfig);
- however, gconfig does have a few more viewing choices than
- xconfig does.
-
-###
+ There is no search command in gconfig. However, gconfig does
+ have several different viewing choices, modes, and options.
new file mode 100644
@@ -0,0 +1,2 @@
+*.lex.c
+*.tab.[ch]
@@ -2,24 +2,12 @@
# For a description of the syntax of this configuration file,
# see docs/misc/kconfig-language.txt
#
-mainmenu "Xen/$SRCARCH $XEN_FULLVERSION Configuration"
-
-config SRCARCH
- string
- option env="SRCARCH"
-
-config ARCH
- string
- option env="ARCH"
+mainmenu "Xen/$(SRCARCH) $(XEN_FULLVERSION) Configuration"
config BROKEN
bool
-source "arch/$SRCARCH/Kconfig"
-
-config XEN_FULLVERSION
- string
- option env="XEN_FULLVERSION"
+source "arch/$(SRCARCH)/Kconfig"
config DEFCONFIG_LIST
string
@@ -28,7 +16,7 @@ config DEFCONFIG_LIST
config EXPERT
string
- option env="XEN_CONFIG_EXPERT"
+ default y if "$(XEN_CONFIG_EXPERT)" = "y"
config LTO
bool "Link Time Optimisation"
@@ -267,7 +267,7 @@ $(foreach base,arch/x86/mm/guest_walk_% \
arch/x86/mm/shadow/guest_%, \
$(foreach ext,o i s,$(call build-intermediate,$(base).$(ext))))
-kconfig := silentoldconfig oldconfig config menuconfig defconfig \
+kconfig := oldconfig config menuconfig defconfig \
nconfig xconfig gconfig savedefconfig listnewconfig olddefconfig \
randconfig $(notdir $(wildcard arch/$(SRCARCH)/configs/*_defconfig))
.PHONY: $(kconfig)
@@ -275,7 +275,7 @@ $(kconfig):
$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" $@
include/config/%.conf: include/config/auto.conf.cmd $(KCONFIG_CONFIG)
- $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" silentoldconfig
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" syncconfig
# Allow people to just run `make` as before and not force them to configure
$(KCONFIG_CONFIG):
@@ -1,6 +1,6 @@
config 64BIT
bool
- default ARCH != "arm32"
+ default "$(ARCH)" != "arm32"
help
Say yes to build a 64-bit Xen
Say no to build a 32-bit Xen
@@ -72,14 +72,6 @@ config NEEDS_LIBELF
config NEEDS_LIST_SORT
bool
-config HAS_BUILD_ID
- string
- option env="XEN_HAS_BUILD_ID"
-
-config HAS_CHECKPOLICY
- string
- option env="XEN_HAS_CHECKPOLICY"
-
menu "Speculative hardening"
config SPECULATIVE_HARDEN_ARRAY
@@ -198,7 +190,7 @@ config XSM_FLASK_AVC_STATS
config XSM_FLASK_POLICY
bool "Compile Xen with a built-in FLASK security policy"
- default y if HAS_CHECKPOLICY = "y"
+ default y if "$(XEN_HAS_CHECKPOLICY)" = "y"
depends on XSM_FLASK
---help---
This includes a default XSM policy in the hypervisor so that the
@@ -350,7 +342,7 @@ config CRYPTO
config LIVEPATCH
bool "Live patching support"
default X86
- depends on HAS_BUILD_ID = "y"
+ depends on "$(XEN_HAS_BUILD_ID)" = "y"
---help---
Allows a running Xen hypervisor to be dynamically patched using
binary patches without rebooting. This is primarily used to binarily
@@ -1,12 +1,8 @@
#
# Generated files
#
-config*
-*.lex.c
-*.tab.c
-*.tab.h
-zconf.hash.c
*.moc
+*conf-cfg
#
# configuration programs
@@ -1,9 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile
-PHONY += xconfig gconfig menuconfig config silentoldconfig \
- localmodconfig localyesconfig
+PHONY += xconfig gconfig menuconfig config localmodconfig localyesconfig \
+ build_menuconfig build_nconfig build_gconfig build_xconfig
ifdef KBUILD_KCONFIG
Kconfig := $(KBUILD_KCONFIG)
@@ -11,6 +12,10 @@ else
Kconfig := Kconfig
endif
+ifndef KBUILD_DEFCONFIG
+KBUILD_DEFCONFIG := defconfig
+endif
+
ifeq ($(quiet),silent_)
silent := -s
endif
@@ -33,49 +38,52 @@ config: $(obj)/conf
nconfig: $(obj)/nconf
$< $(silent) $(Kconfig)
-silentoldconfig: $(obj)/conf
- $(Q)mkdir -p include/config include/generated
- $< $(silent) --$@ $(Kconfig)
+build_menuconfig: $(obj)/mconf
+
+build_nconfig: $(obj)/nconf
-localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
- $(Q)mkdir -p include/config include/generated
- $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config
+build_gconfig: $(obj)/gconf
+
+build_xconfig: $(obj)/qconf
+
+localyesconfig localmodconfig: $(obj)/conf
+ $(Q)perl $(srctree)/$(src)/streamline_config.pl --$@ $(srctree) $(Kconfig) > .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
mv -f .tmp.config .config; \
- $(obj)/conf $(silent) --silentoldconfig $(Kconfig); \
+ $< $(silent) --oldconfig $(Kconfig); \
mv -f .config.old.1 .config.old) \
else \
mv -f .tmp.config .config; \
- $(obj)/conf $(silent) --silentoldconfig $(Kconfig); \
+ $< $(silent) --oldconfig $(Kconfig); \
fi
$(Q)rm -f .tmp.config
# These targets map 1:1 to the commandline options of 'conf'
+#
+# Note:
+# syncconfig has become an internal implementation detail and is now
+# deprecated for external use
simple-targets := oldconfig allnoconfig allyesconfig allmodconfig \
- alldefconfig randconfig listnewconfig olddefconfig
+ alldefconfig randconfig listnewconfig olddefconfig syncconfig
PHONY += $(simple-targets)
$(simple-targets): $(obj)/conf
$< $(silent) --$@ $(Kconfig)
-PHONY += oldnoconfig savedefconfig defconfig
-
-# oldnoconfig is an alias of olddefconfig, because people already are dependent
-# on its behavior (sets new symbols to their default value but not 'n') with the
-# counter-intuitive name.
-oldnoconfig: olddefconfig
+PHONY += savedefconfig defconfig
savedefconfig: $(obj)/conf
$< $(silent) --$@=defconfig $(Kconfig)
defconfig: $(obj)/conf
-ifeq ($(KBUILD_DEFCONFIG),)
- $< $(silent) --defconfig $(Kconfig)
-else
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)),)
@$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
$(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
+else
+ @$(kecho) "*** Default configuration is based on target '$(KBUILD_DEFCONFIG)'"
+ $(Q)$(MAKE) -f $(srctree)/Makefile $(KBUILD_DEFCONFIG)
endif
%_defconfig: $(obj)/conf
@@ -86,7 +94,7 @@ configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/c
%.config: $(obj)/conf
$(if $(call configfiles),, $(error No configuration exists for this target on this architecture))
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(configfiles)
- +$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+ $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
PHONY += kvmconfig
kvmconfig: kvm_guest.config
@@ -100,18 +108,24 @@ PHONY += tinyconfig
tinyconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile allnoconfig tiny.config
+# CHECK: -o cache_dir=<path> working?
+PHONY += testconfig
+testconfig: $(obj)/conf
+ $(PYTHON3) -B -m pytest $(srctree)/$(src)/tests \
+ -o cache_dir=$(abspath $(obj)/tests/.cache) \
+ $(if $(findstring 1,$(KBUILD_VERBOSE)),--capture=no)
+clean-files += tests/.cache
+
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
- @echo ' nconfig - Update current config utilising a ncurses menu based'
- @echo ' program'
+ @echo ' nconfig - Update current config utilising a ncurses menu based program'
@echo ' menuconfig - Update current config utilising a menu based program'
@echo ' xconfig - Update current config utilising a Qt based front-end'
@echo ' gconfig - Update current config utilising a GTK+ based front-end'
@echo ' oldconfig - Update current config utilising a provided .config as base'
@echo ' localmodconfig - Update current config disabling modules not loaded'
@echo ' localyesconfig - Update current config converting local mods to core'
- @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
@echo ' defconfig - New config with default from ARCH supplied defconfig'
@echo ' savedefconfig - Save current config as ./defconfig (minimal config)'
@echo ' allnoconfig - New config where all options are answered with no'
@@ -120,165 +134,77 @@ help:
@echo ' alldefconfig - New config with all symbols set to default'
@echo ' randconfig - New config with random answer to all options'
@echo ' listnewconfig - List new options'
- @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their'
- @echo ' default value'
+ @echo ' olddefconfig - Same as oldconfig but sets new symbols to their'
+ @echo ' default value without prompting'
@echo ' kvmconfig - Enable additional options for kvm guest kernel support'
@echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support'
@echo ' tinyconfig - Configure the tiniest possible kernel'
-
-# lxdialog stuff
-check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
-
-# Use recursively expanded variables so we do not call gcc unless
-# we really need to do so. (Do not call gcc as part of make mrproper)
-HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
- -DLOCALE
+ @echo ' testconfig - Run Kconfig unit tests (requires python3 and pytest)'
# ===========================================================================
-# Shared Makefile for the various kconfig executables:
-# conf: Used for defconfig, oldconfig and related targets
-# nconf: Used for the nconfig target.
-# Utilizes ncurses
-# mconf: Used for the menuconfig target
-# Utilizes the lxdialog package
-# qconf: Used for the xconfig target
-# Based on Qt which needs to be installed to compile it
-# gconf: Used for the gconfig target
-# Based on GTK+ which needs to be installed to compile it
# object files used by all kconfig flavours
+common-objs := confdata.o expr.o lexer.lex.o parser.tab.o preprocess.o \
+ symbol.o
-lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
-lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
+$(obj)/lexer.lex.o: $(obj)/parser.tab.h
+HOSTCFLAGS_lexer.lex.o := -I $(srctree)/$(src)
+HOSTCFLAGS_parser.tab.o := -I $(srctree)/$(src)
-conf-objs := conf.o zconf.tab.o
-mconf-objs := mconf.o zconf.tab.o $(lxdialog)
-nconf-objs := nconf.o zconf.tab.o nconf.gui.o
-qconf-cxxobjs := qconf.o
-qconf-objs := zconf.tab.o
-gconf-objs := gconf.o zconf.tab.o
-
-hostprogs-y := conf nconf mconf qconf gconf
-
-clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
-clean-files += zconf.tab.c zconf.lex.c zconf.hash.c
-
-# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
-PHONY += $(obj)/dochecklxdialog
-$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
-$(obj)/dochecklxdialog:
- $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
-
-always := dochecklxdialog
-
-# generated files seem to need this to find local include files
-HOSTCFLAGS_zconf.lex.o := -I$(src)
-HOSTCFLAGS_zconf.tab.o := -I$(src)
-
-LEX_PREFIX_zconf := zconf
-YACC_PREFIX_zconf := zconf
-
-HOSTLOADLIBES_qconf = $(KC_QT_LIBS)
-HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS)
-
-HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
-HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
- -Wno-missing-prototypes
-
-HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
-
-HOSTLOADLIBES_nconf = $(shell \
- pkg-config --libs menuw panelw ncursesw 2>/dev/null \
- || pkg-config --libs menu panel ncurses 2>/dev/null \
- || echo "-lmenu -lpanel -lncurses" )
-$(obj)/qconf.o: $(obj)/.tmp_qtcheck
-
-ifeq ($(MAKECMDGOALS),xconfig)
-$(obj)/.tmp_qtcheck: $(src)/Makefile
--include $(obj)/.tmp_qtcheck
-
-# Qt needs some extra effort...
-$(obj)/.tmp_qtcheck:
- @set -e; $(kecho) " CHECK qt"; dir=""; pkg=""; \
- if ! pkg-config --exists QtCore 2> /dev/null; then \
- echo "* Unable to find the Qt4 tool qmake. Trying to use Qt3"; \
- pkg-config --exists qt 2> /dev/null && pkg=qt; \
- pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
- if [ -n "$$pkg" ]; then \
- cflags="\$$(shell pkg-config $$pkg --cflags)"; \
- libs="\$$(shell pkg-config $$pkg --libs)"; \
- moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
- dir="$$(pkg-config $$pkg --variable=prefix)"; \
- else \
- for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
- if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
- done; \
- if [ -z "$$dir" ]; then \
- echo >&2 "*"; \
- echo >&2 "* Unable to find any Qt installation. Please make sure that"; \
- echo >&2 "* the Qt4 or Qt3 development package is correctly installed and"; \
- echo >&2 "* either qmake can be found or install pkg-config or set"; \
- echo >&2 "* the QTDIR environment variable to the correct location."; \
- echo >&2 "*"; \
- false; \
- fi; \
- libpath=$$dir/lib; lib=qt; osdir=""; \
- $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
- osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
- test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
- test -f $$libpath/libqt-mt.so && lib=qt-mt; \
- cflags="-I$$dir/include"; \
- libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
- moc="$$dir/bin/moc"; \
- fi; \
- if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
- echo "*"; \
- echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
- echo "*"; \
- moc="/usr/bin/moc"; \
- fi; \
- else \
- cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
- libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
- moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \
- [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \
- fi; \
- echo "KC_QT_CFLAGS=$$cflags" > $@; \
- echo "KC_QT_LIBS=$$libs" >> $@; \
- echo "KC_QT_MOC=$$moc" >> $@
-endif
+# conf: Used for defconfig, oldconfig and related targets
+hostprogs-y += conf
+conf-objs := conf.o $(common-objs)
-$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
-
-ifeq ($(MAKECMDGOALS),gconfig)
--include $(obj)/.tmp_gtkcheck
-
-# GTK+ needs some extra effort, too...
-$(obj)/.tmp_gtkcheck:
- @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
- if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
- touch $@; \
- else \
- echo >&2 "*"; \
- echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \
- echo >&2 "*"; \
- false; \
- fi \
- else \
- echo >&2 "*"; \
- echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \
- echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \
- echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
- echo >&2 "*"; \
- false; \
- fi
-endif
+# nconf: Used for the nconfig target based on ncurses
+hostprogs-y += nconf
+nconf-objs := nconf.o nconf.gui.o $(common-objs)
+
+HOSTLDLIBS_nconf = $(shell . $(obj)/nconf-cfg && echo $$libs)
+HOSTCFLAGS_nconf.o = $(shell . $(obj)/nconf-cfg && echo $$cflags)
+HOSTCFLAGS_nconf.gui.o = $(shell . $(obj)/nconf-cfg && echo $$cflags)
+
+$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg
+
+# mconf: Used for the menuconfig target based on lxdialog
+hostprogs-y += mconf
+lxdialog := $(addprefix lxdialog/, \
+ checklist.o inputbox.o menubox.o textbox.o util.o yesno.o)
+mconf-objs := mconf.o $(lxdialog) $(common-objs)
+
+HOSTLDLIBS_mconf = $(shell . $(obj)/mconf-cfg && echo $$libs)
+$(foreach f, mconf.o $(lxdialog), \
+ $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/mconf-cfg && echo $$$$cflags)))
+
+$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/mconf-cfg
+
+# qconf: Used for the xconfig target based on Qt
+hostprogs-y += qconf
+qconf-cxxobjs := qconf.o
+qconf-objs := images.o $(common-objs)
-$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c
+HOSTLDLIBS_qconf = $(shell . $(obj)/qconf-cfg && echo $$libs)
+HOSTCXXFLAGS_qconf.o = $(shell . $(obj)/qconf-cfg && echo $$cflags)
-$(obj)/qconf.o: $(obj)/qconf.moc
+$(obj)/qconf.o: $(obj)/qconf-cfg $(obj)/qconf.moc
quiet_cmd_moc = MOC $@
- cmd_moc = $(KC_QT_MOC) -i $< -o $@
+ cmd_moc = $(shell . $(obj)/qconf-cfg && echo $$moc) -i $< -o $@
-$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck
+$(obj)/%.moc: $(src)/%.h $(obj)/qconf-cfg
$(call cmd,moc)
+
+# gconf: Used for the gconfig target based on GTK+
+hostprogs-y += gconf
+gconf-objs := gconf.o images.o $(common-objs)
+
+HOSTLDLIBS_gconf = $(shell . $(obj)/gconf-cfg && echo $$libs)
+HOSTCFLAGS_gconf.o = $(shell . $(obj)/gconf-cfg && echo $$cflags)
+
+$(obj)/gconf.o: $(obj)/gconf-cfg
+
+# check if necessary packages are available, and configure build flags
+filechk_conf_cfg = $(CONFIG_SHELL) $<
+
+$(obj)/%conf-cfg: $(src)/%conf-cfg.sh FORCE
+ $(call filechk,conf_cfg)
+
+clean-files += *conf-cfg
@@ -1,3 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# LEX
+# ---------------------------------------------------------------------------
+quiet_cmd_flex = LEX $@
+ cmd_flex = $(LEX) -o$@ -L $<
+
+$(obj)/%.lex.c: $(src)/%.l FORCE
+ $(call if_changed,flex)
+
+# YACC
+# ---------------------------------------------------------------------------
+quiet_cmd_bison = YACC $(basename $@).[ch]
+ cmd_bison = $(YACC) -o $(basename $@).c --defines=$(basename $@).h -t -l $<
+
+$(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE
+ $(call if_changed,bison)
+
# ==========================================================================
# Building binaries on the host system
# Binaries are used during the compilation of the kernel, for example
@@ -5,7 +23,7 @@
#
# Both C and C++ are supported, but preferred language is C for such utilities.
#
-# Sample syntax (see Documentation/kbuild/makefiles.txt for reference)
+# Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
# hostprogs-y := bin2hex
# Will compile bin2hex.c and create an executable named bin2hex
#
@@ -21,6 +39,8 @@
# They are linked as C++ code to the executable qconf
__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
+host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m))
+host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m))
# C code
# Executables compiled from a single .c file
@@ -42,42 +62,38 @@ host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
# C++ Object (.o) files compiled from .cc files
host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
-# output directory for programs/.o files
-# hostprogs-y := tools/build may have been specified.
-# Retrieve also directory of .o files from prog-objs or prog-cxxobjs notation
-host-objdirs := $(dir $(__hostprogs) $(host-cobjs) $(host-cxxobjs))
-
-host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
+# Object (.o) files used by the shared libaries
+host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
+host-cxxshobjs := $(sort $(foreach m,$(host-cxxshlib),$($(m:.so=-objs))))
-
-__hostprogs := $(addprefix $(obj)/,$(__hostprogs))
host-csingle := $(addprefix $(obj)/,$(host-csingle))
host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
-host-objdirs := $(addprefix $(obj)/,$(host-objdirs))
-
-obj-dirs += $(host-objdirs)
+host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
+host-cxxshlib := $(addprefix $(obj)/,$(host-cxxshlib))
+host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
+host-cxxshobjs := $(addprefix $(obj)/,$(host-cxxshobjs))
#####
# Handle options to gcc. Support building with separate output directory
-_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) \
- $(HOSTCFLAGS_$(basetarget).o)
-_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
- $(HOSTCXXFLAGS_$(basetarget).o)
-
-ifeq ($(KBUILD_SRC),)
-__hostc_flags = $(_hostc_flags)
-__hostcxx_flags = $(_hostcxx_flags)
-else
-__hostc_flags = -I$(obj) $(call flags,_hostc_flags)
-__hostcxx_flags = -I$(obj) $(call flags,_hostcxx_flags)
+_hostc_flags = $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS) \
+ $(HOSTCFLAGS_$(target-stem).o)
+_hostcxx_flags = $(KBUILD_HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
+ $(HOSTCXXFLAGS_$(target-stem).o)
+
+# $(objtree)/$(obj) for including generated headers from checkin source files
+ifeq ($(KBUILD_EXTMOD),)
+ifdef building_out_of_srctree
+_hostc_flags += -I $(objtree)/$(obj)
+_hostcxx_flags += -I $(objtree)/$(obj)
+endif
endif
-hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags)
-hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
+hostc_flags = -Wp,-MD,$(depfile) $(_hostc_flags)
+hostcxx_flags = -Wp,-MD,$(depfile) $(_hostcxx_flags)
#####
# Compile programs on the host
@@ -85,17 +101,17 @@ hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
# Create executable from a single .c file
# host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@
- cmd_host-csingle = $(HOSTCC) $(hostc_flags) -o $@ $< \
- $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
+ cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(KBUILD_HOSTLDFLAGS) -o $@ $< \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
$(host-csingle): $(obj)/%: $(src)/%.c FORCE
$(call if_changed_dep,host-csingle)
# Link an executable based on list of .o files, all plain c
# host-cmulti -> executable
quiet_cmd_host-cmulti = HOSTLD $@
- cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
- $(addprefix $(obj)/,$($(@F)-objs)) \
- $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
+ cmd_host-cmulti = $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -o $@ \
+ $(addprefix $(obj)/, $($(target-stem)-objs)) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
$(host-cmulti): FORCE
$(call if_changed,host-cmulti)
$(call multi_depend, $(host-cmulti), , -objs)
@@ -110,10 +126,10 @@ $(host-cobjs): $(obj)/%.o: $(src)/%.c FORCE
# Link an executable based on list of .o files, a mixture of .c and .cc
# host-cxxmulti -> executable
quiet_cmd_host-cxxmulti = HOSTLD $@
- cmd_host-cxxmulti = $(HOSTCXX) $(HOSTLDFLAGS) -o $@ \
+ cmd_host-cxxmulti = $(HOSTCXX) $(KBUILD_HOSTLDFLAGS) -o $@ \
$(foreach o,objs cxxobjs,\
- $(addprefix $(obj)/,$($(@F)-$(o)))) \
- $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
+ $(addprefix $(obj)/, $($(target-stem)-$(o)))) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
$(host-cxxmulti): FORCE
$(call if_changed,host-cxxmulti)
$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
@@ -124,5 +140,42 @@ quiet_cmd_host-cxxobjs = HOSTCXX $@
$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
$(call if_changed_dep,host-cxxobjs)
+# Compile .c file, create position independent .o file
+# host-cshobjs -> .o
+quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
+ cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
+$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
+ $(call if_changed_dep,host-cshobjs)
+
+# Compile .c file, create position independent .o file
+# Note that plugin capable gcc versions can be either C or C++ based
+# therefore plugin source files have to be compilable in both C and C++ mode.
+# This is why a C++ compiler is invoked on a .c file.
+# host-cxxshobjs -> .o
+quiet_cmd_host-cxxshobjs = HOSTCXX -fPIC $@
+ cmd_host-cxxshobjs = $(HOSTCXX) $(hostcxx_flags) -fPIC -c -o $@ $<
+$(host-cxxshobjs): $(obj)/%.o: $(src)/%.c FORCE
+ $(call if_changed_dep,host-cxxshobjs)
+
+# Link a shared library, based on position independent .o files
+# *.o -> .so shared library (host-cshlib)
+quiet_cmd_host-cshlib = HOSTLLD -shared $@
+ cmd_host-cshlib = $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
+ $(addprefix $(obj)/, $($(target-stem)-objs)) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
+$(host-cshlib): FORCE
+ $(call if_changed,host-cshlib)
+$(call multi_depend, $(host-cshlib), .so, -objs)
+
+# Link a shared library, based on position independent .o files
+# *.o -> .so shared library (host-cxxshlib)
+quiet_cmd_host-cxxshlib = HOSTLLD -shared $@
+ cmd_host-cxxshlib = $(HOSTCXX) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
+ $(addprefix $(obj)/, $($(target-stem)-objs)) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
+$(host-cxxshlib): FORCE
+ $(call if_changed,host-cxxshlib)
+$(call multi_depend, $(host-cxxshlib), .so, -objs)
+
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
- $(host-cxxmulti) $(host-cxxobjs)
+ $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) $(host-cxxshlib) $(host-cxxshobjs)
@@ -4,8 +4,8 @@
all:
# Xen doesn't have a silent build flag
-quiet := silent_
-Q := @
+quiet :=
+Q :=
kecho := :
# eventually you'll want to do out of tree builds
@@ -13,16 +13,44 @@ srctree := $(XEN_ROOT)/xen
objtree := $(srctree)
src := tools/kconfig
obj := $(src)
-KBUILD_SRC :=
# handle functions (most of these lifted from different Linux makefiles
dot-target = $(dir $@).$(notdir $@)
depfile = $(subst $(comma),,$(dot-target).d)
basetarget = $(basename $(notdir $@))
+# target with $(obj)/ and its suffix stripped
+target-stem = $(basename $(patsubst $(obj)/%,%,$@))
cmd = $(cmd_$(1))
if_changed = $(cmd_$(1))
if_changed_dep = $(cmd_$(1))
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+#
+# filechk_sample = echo $(KERNELRELEASE)
+# version.h: FORCE
+# $(call filechk,sample)
+#
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+# - stdin is piped in from the first prerequisite ($<) so one has
+# to specify a valid file as first prerequisite (often the kbuild file)
+define filechk
+ $(Q)set -e; \
+ mkdir -p $(dir $@); \
+ { $(filechk_$(1)); } > $@.tmp; \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ $(kecho) ' UPD $@'; \
+ mv -f $@.tmp $@; \
+ fi
+endef
+
define multi_depend
$(foreach m, $(notdir $1), \
$(eval $(obj)/$m: \
@@ -38,6 +66,8 @@ CONFIG_SHELL := $(SHELL)
# provide the host compiler
HOSTCC ?= gcc
HOSTCXX ?= g++
+YACC = $(if $(BISON),$(BISON),bison)
+LEX = $(if $(FLEX),$(FLEX),flex)
# force target
PHONY += FORCE
@@ -48,6 +78,18 @@ FORCE:
include $(src)/Makefile
include $(src)/Makefile.host
+# Add intermediate targets:
+# When building objects with specific suffix patterns, add intermediate
+# targets that the final targets are derived from.
+intermediate_targets = $(foreach sfx, $(2), \
+ $(patsubst %$(strip $(1)),%$(sfx), \
+ $(filter %$(strip $(1)), $(targets))))
+
+# %.lex.o <- %.lex.c <- %.l
+# %.tab.o <- %.tab.[ch] <- %.y
+targets += $(call intermediate_targets, .lex.o, .lex.c) \
+ $(call intermediate_targets, .tab.o, .tab.c .tab.h)
+
# clean up rule
clean-deps = $(foreach f,$(host-cobjs) $(host-cxxobjs),$(dir $f).$(notdir $f).d)
clean-shipped = $(patsubst %_shipped,%,$(wildcard $(obj)/*_shipped))
@@ -59,4 +101,6 @@ clean:
rm -rf $(clean-shipped)
$(obj)/zconf%: $(src)/zconf%_shipped
- @cp -f $< $@
+ cp -f $< $@
+
+.PHONY: $(PHONY)
@@ -1,9 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
#include <ctype.h>
+#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -18,11 +19,10 @@
static void conf(struct menu *menu);
static void check_conf(struct menu *menu);
-static void xfgets(char *str, int size, FILE *in);
enum input_mode {
oldaskconfig,
- silentoldconfig,
+ syncconfig,
oldconfig,
allnoconfig,
allyesconfig,
@@ -33,14 +33,14 @@ enum input_mode {
savedefconfig,
listnewconfig,
olddefconfig,
-} input_mode = oldaskconfig;
+};
+static enum input_mode input_mode = oldaskconfig;
static int indent = 1;
static int tty_stdio;
-static int valid_stdin = 1;
static int sync_kconfig;
static int conf_cnt;
-static char line[128];
+static char line[PATH_MAX];
static struct menu *rootEntry;
static void print_help(struct menu *menu)
@@ -70,14 +70,14 @@ static void strip(char *str)
*p-- = 0;
}
-static void check_stdin(void)
+/* Helper function to facilitate fgets() by Jean Sacren. */
+static void xfgets(char *str, int size, FILE *in)
{
- if (!valid_stdin) {
- printf("aborted!\n\n");
- printf("Console input/output is redirected. ");
- printf("Run 'make oldconfig' to update configuration.\n\n");
- exit(1);
- }
+ if (!fgets(str, size, in))
+ fprintf(stderr, "\nError in reading or end of file.\n");
+
+ if (!tty_stdio)
+ printf("%s", str);
}
static int conf_askvalue(struct symbol *sym, const char *def)
@@ -90,7 +90,7 @@ static int conf_askvalue(struct symbol *sym, const char *def)
line[0] = '\n';
line[1] = 0;
- if (!sym_is_changable(sym)) {
+ if (!sym_is_changeable(sym)) {
printf("%s\n", def);
line[0] = '\n';
line[1] = 0;
@@ -99,18 +99,15 @@ static int conf_askvalue(struct symbol *sym, const char *def)
switch (input_mode) {
case oldconfig:
- case silentoldconfig:
+ case syncconfig:
if (sym_has_value(sym)) {
printf("%s\n", def);
return 0;
}
- check_stdin();
/* fall through */
case oldaskconfig:
fflush(stdout);
- xfgets(line, 128, stdin);
- if (!tty_stdio)
- printf("\n");
+ xfgets(line, sizeof(line), stdin);
return 1;
default:
break;
@@ -190,9 +187,7 @@ static int conf_sym(struct menu *menu)
printf("/m");
if (oldval != yes && sym_tristate_within_range(sym, yes))
printf("/y");
- if (menu_has_help(menu))
- printf("/?");
- printf("] ");
+ printf("/?] ");
if (!conf_askvalue(sym, sym_get_string_value(sym)))
return 0;
strip(line);
@@ -239,7 +234,7 @@ static int conf_choice(struct menu *menu)
sym = menu->sym;
is_new = !sym_has_value(sym);
- if (sym_is_changable(sym)) {
+ if (sym_is_changeable(sym)) {
conf_sym(menu);
sym_calc_value(sym);
switch (sym_get_tristate_value(sym)) {
@@ -294,23 +289,19 @@ static int conf_choice(struct menu *menu)
printf("[1]: 1\n");
goto conf_childs;
}
- printf("[1-%d", cnt);
- if (menu_has_help(menu))
- printf("?");
- printf("]: ");
+ printf("[1-%d?]: ", cnt);
switch (input_mode) {
case oldconfig:
- case silentoldconfig:
+ case syncconfig:
if (!is_new) {
cnt = def;
printf("%d\n", cnt);
break;
}
- check_stdin();
/* fall through */
case oldaskconfig:
fflush(stdout);
- xfgets(line, 128, stdin);
+ xfgets(line, sizeof(line), stdin);
strip(line);
if (line[0] == '?') {
print_help(menu);
@@ -366,10 +357,11 @@ static void conf(struct menu *menu)
switch (prop->type) {
case P_MENU:
- if ((input_mode == silentoldconfig ||
- input_mode == listnewconfig ||
- input_mode == olddefconfig) &&
- rootEntry != menu) {
+ /*
+ * Except in oldaskconfig mode, we show only menus that
+ * contain new symbols.
+ */
+ if (input_mode != oldaskconfig && rootEntry != menu) {
check_conf(menu);
return;
}
@@ -426,13 +418,23 @@ static void check_conf(struct menu *menu)
sym = menu->sym;
if (sym && !sym_has_value(sym)) {
- if (sym_is_changable(sym) ||
+ if (sym_is_changeable(sym) ||
(sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)) {
if (input_mode == listnewconfig) {
- if (sym->name && !sym_is_choice_value(sym)) {
- printf("%s%s\n", CONFIG_, sym->name);
+ if (sym->name) {
+ const char *str;
+
+ if (sym->type == S_STRING) {
+ str = sym_get_string_value(sym);
+ str = sym_escape_string_value(str);
+ printf("%s%s=%s\n", CONFIG_, sym->name, str);
+ free((void *)str);
+ } else {
+ str = sym_get_string_value(sym);
+ printf("%s%s=%s\n", CONFIG_, sym->name, str);
+ }
}
- } else if (input_mode != olddefconfig) {
+ } else {
if (!conf_cnt++)
printf("*\n* Restart config...\n*\n");
rootEntry = menu_get_parent_menu(menu);
@@ -448,8 +450,8 @@ static void check_conf(struct menu *menu)
static struct option long_opts[] = {
{"oldaskconfig", no_argument, NULL, oldaskconfig},
{"oldconfig", no_argument, NULL, oldconfig},
- {"silentoldconfig", no_argument, NULL, silentoldconfig},
- {"defconfig", optional_argument, NULL, defconfig},
+ {"syncconfig", no_argument, NULL, syncconfig},
+ {"defconfig", required_argument, NULL, defconfig},
{"savedefconfig", required_argument, NULL, savedefconfig},
{"allnoconfig", no_argument, NULL, allnoconfig},
{"allyesconfig", no_argument, NULL, allyesconfig},
@@ -458,12 +460,6 @@ static struct option long_opts[] = {
{"randconfig", no_argument, NULL, randconfig},
{"listnewconfig", no_argument, NULL, listnewconfig},
{"olddefconfig", no_argument, NULL, olddefconfig},
- /*
- * oldnoconfig is an alias of olddefconfig, because people already
- * are dependent on its behavior(sets new symbols to their default
- * value but not 'n') with the counter-intuitive name.
- */
- {"oldnoconfig", no_argument, NULL, olddefconfig},
{NULL, 0, NULL, 0}
};
@@ -475,9 +471,9 @@ static void conf_usage(const char *progname)
printf(" --listnewconfig List new options\n");
printf(" --oldaskconfig Start a new configuration using a line-oriented program\n");
printf(" --oldconfig Update a configuration using a provided .config as base\n");
- printf(" --silentoldconfig Same as oldconfig, but quietly, additionally update deps\n");
- printf(" --olddefconfig Same as silentoldconfig but sets new symbols to their default value\n");
- printf(" --oldnoconfig An alias of olddefconfig\n");
+ printf(" --syncconfig Similar to oldconfig but generates configuration in\n"
+ " include/{generated/,config/}\n");
+ printf(" --olddefconfig Same as oldconfig but sets new symbols to their default value\n");
printf(" --defconfig <file> New config with default defined in <file>\n");
printf(" --savedefconfig <file> Save the minimal current configuration to <file>\n");
printf(" --allnoconfig New config where all options are answered with no\n");
@@ -492,9 +488,9 @@ int main(int ac, char **av)
const char *progname = av[0];
int opt;
const char *name, *defconfig_file = NULL /* gcc uninit */;
- struct stat tmpstat;
+ int no_conf_write = 0;
- tty_stdio = isatty(0) && isatty(1) && isatty(2);
+ tty_stdio = isatty(0) && isatty(1);
while ((opt = getopt_long(ac, av, "s", long_opts, NULL)) != -1) {
if (opt == 's') {
@@ -503,7 +499,12 @@ int main(int ac, char **av)
}
input_mode = (enum input_mode)opt;
switch (opt) {
- case silentoldconfig:
+ case syncconfig:
+ /*
+ * syncconfig is invoked during the build stage.
+ * Suppress distracting "configuration written to ..."
+ */
+ conf_set_message_callback(NULL);
sync_kconfig = 1;
break;
case defconfig:
@@ -551,39 +552,27 @@ int main(int ac, char **av)
}
}
if (ac == optind) {
- printf("%s: Kconfig file missing\n", av[0]);
+ fprintf(stderr, "%s: Kconfig file missing\n", av[0]);
conf_usage(progname);
exit(1);
}
name = av[optind];
conf_parse(name);
//zconfdump(stdout);
- if (sync_kconfig) {
- name = conf_get_configname();
- if (stat(name, &tmpstat)) {
- fprintf(stderr, "***\n"
- "*** Configuration file \"%s\" not found!\n"
- "***\n"
- "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
- "*** \"make menuconfig\" or \"make xconfig\").\n"
- "***\n", name);
- exit(1);
- }
- }
switch (input_mode) {
case defconfig:
- if (!defconfig_file)
- defconfig_file = conf_get_default_confname();
if (conf_read(defconfig_file)) {
- printf("***\n"
- "*** Can't find default configuration \"%s\"!\n"
- "***\n", defconfig_file);
+ fprintf(stderr,
+ "***\n"
+ "*** Can't find default configuration \"%s\"!\n"
+ "***\n",
+ defconfig_file);
exit(1);
}
break;
case savedefconfig:
- case silentoldconfig:
+ case syncconfig:
case oldaskconfig:
case oldconfig:
case listnewconfig:
@@ -628,15 +617,15 @@ int main(int ac, char **av)
}
if (sync_kconfig) {
- if (conf_get_changed()) {
- name = getenv("KCONFIG_NOSILENTUPDATE");
- if (name && *name) {
+ name = getenv("KCONFIG_NOSILENTUPDATE");
+ if (name && *name) {
+ if (conf_get_changed()) {
fprintf(stderr,
"\n*** The configuration requires explicit update.\n\n");
return 1;
}
+ no_conf_write = 1;
}
- valid_stdin = tty_stdio;
}
switch (input_mode) {
@@ -664,54 +653,48 @@ int main(int ac, char **av)
case oldaskconfig:
rootEntry = &rootmenu;
conf(&rootmenu);
- input_mode = silentoldconfig;
+ input_mode = oldconfig;
/* fall through */
case oldconfig:
case listnewconfig:
- case olddefconfig:
- case silentoldconfig:
+ case syncconfig:
/* Update until a loop caused no more changes */
do {
conf_cnt = 0;
check_conf(&rootmenu);
- } while (conf_cnt &&
- (input_mode != listnewconfig &&
- input_mode != olddefconfig));
+ } while (conf_cnt);
+ break;
+ case olddefconfig:
+ default:
break;
}
- if (sync_kconfig) {
- /* silentoldconfig is used during the build so we shall update autoconf.
- * All other commands are only used to generate a config.
- */
- if (conf_get_changed() && conf_write(NULL)) {
- fprintf(stderr, "\n*** Error during writing of the configuration.\n\n");
- exit(1);
- }
- if (conf_write_autoconf()) {
- fprintf(stderr, "\n*** Error during update of the configuration.\n\n");
- return 1;
- }
- } else if (input_mode == savedefconfig) {
+ if (input_mode == savedefconfig) {
if (conf_write_defconfig(defconfig_file)) {
fprintf(stderr, "n*** Error while saving defconfig to: %s\n\n",
defconfig_file);
return 1;
}
} else if (input_mode != listnewconfig) {
- if (conf_write(NULL)) {
+ if (!no_conf_write && conf_write(NULL)) {
fprintf(stderr, "\n*** Error during writing of the configuration.\n\n");
exit(1);
}
+
+ /*
+ * Create auto.conf if it does not exist.
+ * This prevents GNU Make 4.1 or older from emitting
+ * "include/config/auto.conf: No such file or directory"
+ * in the top-level Makefile
+ *
+ * syncconfig always creates or updates auto.conf because it is
+ * used during the build.
+ */
+ if (conf_write_autoconf(sync_kconfig) && sync_kconfig) {
+ fprintf(stderr,
+ "\n*** Error during sync of the configuration.\n\n");
+ return 1;
+ }
}
return 0;
}
-
-/*
- * Helper function to facilitate fgets() by Jean Sacren.
- */
-void xfgets(char *str, int size, FILE *in)
-{
- if (fgets(str, size, in) == NULL)
- fprintf(stderr, "\nError in reading or end of file.\n");
-}
@@ -1,12 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
+#include <sys/mman.h>
#include <sys/stat.h>
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
+#include <limits.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
@@ -16,6 +18,151 @@
#include "lkc.h"
+/* return true if 'path' exists, false otherwise */
+static bool is_present(const char *path)
+{
+ struct stat st;
+
+ return !stat(path, &st);
+}
+
+/* return true if 'path' exists and it is a directory, false otherwise */
+static bool is_dir(const char *path)
+{
+ struct stat st;
+
+ if (stat(path, &st))
+ return 0;
+
+ return S_ISDIR(st.st_mode);
+}
+
+/* return true if the given two files are the same, false otherwise */
+static bool is_same(const char *file1, const char *file2)
+{
+ int fd1, fd2;
+ struct stat st1, st2;
+ void *map1, *map2;
+ bool ret = false;
+
+ fd1 = open(file1, O_RDONLY);
+ if (fd1 < 0)
+ return ret;
+
+ fd2 = open(file2, O_RDONLY);
+ if (fd2 < 0)
+ goto close1;
+
+ ret = fstat(fd1, &st1);
+ if (ret)
+ goto close2;
+ ret = fstat(fd2, &st2);
+ if (ret)
+ goto close2;
+
+ if (st1.st_size != st2.st_size)
+ goto close2;
+
+ map1 = mmap(NULL, st1.st_size, PROT_READ, MAP_PRIVATE, fd1, 0);
+ if (map1 == MAP_FAILED)
+ goto close2;
+
+ map2 = mmap(NULL, st2.st_size, PROT_READ, MAP_PRIVATE, fd2, 0);
+ if (map2 == MAP_FAILED)
+ goto close2;
+
+ if (bcmp(map1, map2, st1.st_size))
+ goto close2;
+
+ ret = true;
+close2:
+ close(fd2);
+close1:
+ close(fd1);
+
+ return ret;
+}
+
+/*
+ * Create the parent directory of the given path.
+ *
+ * For example, if 'include/config/auto.conf' is given, create 'include/config'.
+ */
+static int make_parent_dir(const char *path)
+{
+ char tmp[PATH_MAX + 1];
+ char *p;
+
+ strncpy(tmp, path, sizeof(tmp));
+ tmp[sizeof(tmp) - 1] = 0;
+
+ /* Remove the base name. Just return if nothing is left */
+ p = strrchr(tmp, '/');
+ if (!p)
+ return 0;
+ *(p + 1) = 0;
+
+ /* Just in case it is an absolute path */
+ p = tmp;
+ while (*p == '/')
+ p++;
+
+ while ((p = strchr(p, '/'))) {
+ *p = 0;
+
+ /* skip if the directory exists */
+ if (!is_dir(tmp) && mkdir(tmp, 0755))
+ return -1;
+
+ *p = '/';
+ while (*p == '/')
+ p++;
+ }
+
+ return 0;
+}
+
+static char depfile_path[PATH_MAX];
+static size_t depfile_prefix_len;
+
+/* touch depfile for symbol 'name' */
+static int conf_touch_dep(const char *name)
+{
+ int fd, ret;
+ const char *s;
+ char *d, c;
+
+ /* check overflow: prefix + name + ".h" + '\0' must fit in buffer. */
+ if (depfile_prefix_len + strlen(name) + 3 > sizeof(depfile_path))
+ return -1;
+
+ d = depfile_path + depfile_prefix_len;
+ s = name;
+
+ while ((c = *s++))
+ *d++ = (c == '_') ? '/' : tolower(c);
+ strcpy(d, ".h");
+
+ /* Assume directory path already exists. */
+ fd = open(depfile_path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd == -1) {
+ if (errno != ENOENT)
+ return -1;
+
+ ret = make_parent_dir(depfile_path);
+ if (ret)
+ return ret;
+
+ /* Try it again. */
+ fd = open(depfile_path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd == -1)
+ return -1;
+ }
+ close(fd);
+
+ return 0;
+}
+
struct conf_printer {
void (*print_symbol)(FILE *, struct symbol *, const char *, void *);
void (*print_comment)(FILE *, const char *, void *);
@@ -28,9 +175,7 @@ static void conf_message(const char *fmt, ...)
__attribute__ ((format (printf, 1, 2)));
static const char *conf_filename;
-static int conf_lineno, conf_warnings, conf_unsaved;
-
-const char conf_defname[] = "arch/$ARCH/defconfig";
+static int conf_lineno, conf_warnings;
static void conf_warning(const char *fmt, ...)
{
@@ -43,16 +188,16 @@ static void conf_warning(const char *fmt, ...)
conf_warnings++;
}
-static void conf_default_message_callback(const char *fmt, va_list ap)
+static void conf_default_message_callback(const char *s)
{
printf("#\n# ");
- vprintf(fmt, ap);
+ printf("%s", s);
printf("\n#\n");
}
-static void (*conf_message_callback) (const char *fmt, va_list ap) =
+static void (*conf_message_callback)(const char *s) =
conf_default_message_callback;
-void conf_set_message_callback(void (*fn) (const char *fmt, va_list ap))
+void conf_set_message_callback(void (*fn)(const char *s))
{
conf_message_callback = fn;
}
@@ -60,10 +205,15 @@ void conf_set_message_callback(void (*fn) (const char *fmt, va_list ap))
static void conf_message(const char *fmt, ...)
{
va_list ap;
+ char buf[4096];
+
+ if (!conf_message_callback)
+ return;
va_start(ap, fmt);
- if (conf_message_callback)
- conf_message_callback(fmt, ap);
+
+ vsnprintf(buf, sizeof(buf), fmt, ap);
+ conf_message_callback(buf);
va_end(ap);
}
@@ -74,55 +224,13 @@ const char *conf_get_configname(void)
return name ? name : ".config";
}
-const char *conf_get_autoconfig_name(void)
+static const char *conf_get_autoconfig_name(void)
{
char *name = getenv("KCONFIG_AUTOCONFIG");
return name ? name : "include/config/auto.conf";
}
-static char *conf_expand_value(const char *in)
-{
- struct symbol *sym;
- const char *src;
- static char res_value[SYMBOL_MAXLENGTH];
- char *dst, name[SYMBOL_MAXLENGTH];
-
- res_value[0] = 0;
- dst = name;
- while ((src = strchr(in, '$'))) {
- strncat(res_value, in, src - in);
- src++;
- dst = name;
- while (isalnum(*src) || *src == '_')
- *dst++ = *src++;
- *dst = 0;
- sym = sym_lookup(name, 0);
- sym_calc_value(sym);
- strcat(res_value, sym_get_string_value(sym));
- in = src;
- }
- strcat(res_value, in);
-
- return res_value;
-}
-
-char *conf_get_default_confname(void)
-{
- struct stat buf;
- static char fullname[PATH_MAX+1];
- char *env, *name;
-
- name = conf_expand_value(conf_defname);
- env = getenv(SRCTREE);
- if (env) {
- sprintf(fullname, "%s/%s", env, name);
- if (!stat(fullname, &buf))
- return fullname;
- }
- return name;
-}
-
static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p)
{
char *p2;
@@ -150,14 +258,6 @@ static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p)
conf_warning("symbol value '%s' invalid for %s",
p, sym->name);
return 1;
- case S_OTHER:
- if (*p != '"') {
- for (p2 = p; *p2 && !isspace(*p2); p2++)
- ;
- sym->type = S_STRING;
- goto done;
- }
- /* fall through */
case S_STRING:
if (*p++ != '"')
break;
@@ -176,9 +276,8 @@ static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p)
/* fall through */
case S_INT:
case S_HEX:
- done:
if (sym_string_valid(sym, p)) {
- sym->def[def].val = strdup(p);
+ sym->def[def].val = xstrdup(p);
sym->flags |= def_flags;
} else {
if (def != S_DEF_AUTO)
@@ -201,7 +300,7 @@ static int add_byte(int c, char **lineptr, size_t slen, size_t *n)
if (new_size > *n) {
new_size += LINE_GROWTH - 1;
new_size *= 2;
- nline = realloc(*lineptr, new_size);
+ nline = xrealloc(*lineptr, new_size);
if (!nline)
return -1;
@@ -267,16 +366,15 @@ int conf_read_simple(const char *name, int def)
if (in)
goto load;
sym_add_change_count(1);
- if (!sym_defconfig_list) {
- sym_calc_value(modules_sym);
+ if (!sym_defconfig_list)
return 1;
- }
for_all_defaults(sym_defconfig_list, prop) {
if (expr_calc_value(prop->visible.expr) == no ||
prop->expr->type != E_SYMBOL)
continue;
- name = conf_expand_value(prop->expr->left.sym->name);
+ sym_calc_value(prop->expr->left.sym);
+ name = sym_get_string_value(prop->expr->left.sym);
in = zconf_fopen(name);
if (in) {
conf_message("using defaults found in %s",
@@ -292,7 +390,6 @@ int conf_read_simple(const char *name, int def)
conf_filename = name;
conf_lineno = 0;
conf_warnings = 0;
- conf_unsaved = 0;
def_flags = SYMBOL_DEF << def;
for_all_symbols(i, sym) {
@@ -329,7 +426,7 @@ int conf_read_simple(const char *name, int def)
sym = sym_find(line + 2 + strlen(CONFIG_));
if (!sym) {
sym_add_change_count(1);
- goto setsym;
+ continue;
}
} else {
sym = sym_lookup(line + 2 + strlen(CONFIG_), 0);
@@ -359,17 +456,22 @@ int conf_read_simple(const char *name, int def)
if (*p2 == '\r')
*p2 = 0;
}
- if (def == S_DEF_USER) {
- sym = sym_find(line + strlen(CONFIG_));
- if (!sym) {
+
+ sym = sym_find(line + strlen(CONFIG_));
+ if (!sym) {
+ if (def == S_DEF_AUTO)
+ /*
+ * Reading from include/config/auto.conf
+ * If CONFIG_FOO previously existed in
+ * auto.conf but it is missing now,
+ * include/config/foo.h must be touched.
+ */
+ conf_touch_dep(line + strlen(CONFIG_));
+ else
sym_add_change_count(1);
- goto setsym;
- }
- } else {
- sym = sym_lookup(line + strlen(CONFIG_), 0);
- if (sym->type == S_UNKNOWN)
- sym->type = S_OTHER;
+ continue;
}
+
if (sym->flags & def_flags) {
conf_warning("override: reassigning to symbol %s", sym->name);
}
@@ -377,10 +479,12 @@ int conf_read_simple(const char *name, int def)
continue;
} else {
if (line[0] != '\r' && line[0] != '\n')
- conf_warning("unexpected data");
+ conf_warning("unexpected data: %.*s",
+ (int)strcspn(line, "\r\n"), line);
+
continue;
}
-setsym:
+
if (sym && sym_is_choice_value(sym)) {
struct symbol *cs = prop_get_symbol(sym_get_choice_prop(sym));
switch (sym->def[def].tri) {
@@ -403,34 +507,36 @@ int conf_read_simple(const char *name, int def)
}
free(line);
fclose(in);
- sym_calc_value(modules_sym);
return 0;
}
int conf_read(const char *name)
{
struct symbol *sym;
+ int conf_unsaved = 0;
int i;
sym_set_change_count(0);
- if (conf_read_simple(name, S_DEF_USER))
+ if (conf_read_simple(name, S_DEF_USER)) {
+ sym_calc_value(modules_sym);
return 1;
+ }
+
+ sym_calc_value(modules_sym);
for_all_symbols(i, sym) {
sym_calc_value(sym);
- if (sym_is_choice(sym) || (sym->flags & SYMBOL_AUTO))
+ if (sym_is_choice(sym) || (sym->flags & SYMBOL_NO_WRITE))
continue;
if (sym_has_value(sym) && (sym->flags & SYMBOL_WRITE)) {
/* check that calculated value agrees with saved value */
switch (sym->type) {
case S_BOOLEAN:
case S_TRISTATE:
- if (sym->def[S_DEF_USER].tri != sym_get_tristate_value(sym))
- break;
- if (!sym_is_choice(sym))
+ if (sym->def[S_DEF_USER].tri == sym_get_tristate_value(sym))
continue;
- /* fall through */
+ break;
default:
if (!strcmp(sym->curr.val, sym->def[S_DEF_USER].val))
continue;
@@ -629,7 +735,6 @@ static void conf_write_symbol(FILE *fp, struct symbol *sym,
const char *str;
switch (sym->type) {
- case S_OTHER:
case S_UNKNOWN:
break;
case S_STRING:
@@ -689,7 +794,7 @@ int conf_write_defconfig(const char *filename)
goto next_menu;
sym->flags &= ~SYMBOL_WRITE;
/* If we cannot change the symbol - skip */
- if (!sym_is_changable(sym))
+ if (!sym_is_changeable(sym))
goto next_menu;
/* If symbol equals to default value - skip */
if (strcmp(sym_get_string_value(sym), sym_get_string_default(sym)) == 0)
@@ -740,41 +845,36 @@ int conf_write(const char *name)
FILE *out;
struct symbol *sym;
struct menu *menu;
- const char *basename;
const char *str;
- char dirname[PATH_MAX+1], tmpname[PATH_MAX+1], newname[PATH_MAX+1];
+ char tmpname[PATH_MAX + 1], oldname[PATH_MAX + 1];
char *env;
+ int i;
+ bool need_newline = false;
+
+ if (!name)
+ name = conf_get_configname();
+
+ if (!*name) {
+ fprintf(stderr, "config name is empty\n");
+ return -1;
+ }
+
+ if (is_dir(name)) {
+ fprintf(stderr, "%s: Is a directory\n", name);
+ return -1;
+ }
+
+ if (make_parent_dir(name))
+ return -1;
- dirname[0] = 0;
- if (name && name[0]) {
- struct stat st;
- char *slash;
-
- if (!stat(name, &st) && S_ISDIR(st.st_mode)) {
- strcpy(dirname, name);
- strcat(dirname, "/");
- basename = conf_get_configname();
- } else if ((slash = strrchr(name, '/'))) {
- int size = slash - name + 1;
- memcpy(dirname, name, size);
- dirname[size] = 0;
- if (slash[1])
- basename = slash + 1;
- else
- basename = conf_get_configname();
- } else
- basename = name;
- } else
- basename = conf_get_configname();
-
- sprintf(newname, "%s%s", dirname, basename);
env = getenv("KCONFIG_OVERWRITECONFIG");
- if (!env || !*env) {
- sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
- out = fopen(tmpname, "w");
- } else {
+ if (env && *env) {
*tmpname = 0;
- out = fopen(newname, "w");
+ out = fopen(name, "w");
+ } else {
+ snprintf(tmpname, sizeof(tmpname), "%s.%d.tmp",
+ name, (int)getpid());
+ out = fopen(tmpname, "w");
}
if (!out)
return 1;
@@ -795,12 +895,17 @@ int conf_write(const char *name)
"#\n"
"# %s\n"
"#\n", str);
- } else if (!(sym->flags & SYMBOL_CHOICE)) {
+ need_newline = false;
+ } else if (!(sym->flags & SYMBOL_CHOICE) &&
+ !(sym->flags & SYMBOL_WRITTEN)) {
sym_calc_value(sym);
if (!(sym->flags & SYMBOL_WRITE))
goto next;
- sym->flags &= ~SYMBOL_WRITE;
-
+ if (need_newline) {
+ fprintf(out, "\n");
+ need_newline = false;
+ }
+ sym->flags |= SYMBOL_WRITTEN;
conf_write_symbol(out, sym, &kconfig_printer_cb, NULL);
}
@@ -812,6 +917,12 @@ int conf_write(const char *name)
if (menu->next)
menu = menu->next;
else while ((menu = menu->parent)) {
+ if (!menu->sym && menu_is_visible(menu) &&
+ menu != &rootmenu) {
+ str = menu_get_prompt(menu);
+ fprintf(out, "# end of %s\n", str);
+ need_newline = true;
+ }
if (menu->next) {
menu = menu->next;
break;
@@ -820,40 +931,76 @@ int conf_write(const char *name)
}
fclose(out);
+ for_all_symbols(i, sym)
+ sym->flags &= ~SYMBOL_WRITTEN;
+
if (*tmpname) {
- strcat(dirname, basename);
- strcat(dirname, ".old");
- rename(newname, dirname);
- if (rename(tmpname, newname))
+ if (is_same(name, tmpname)) {
+ conf_message("No change to %s", name);
+ unlink(tmpname);
+ sym_set_change_count(0);
+ return 0;
+ }
+
+ snprintf(oldname, sizeof(oldname), "%s.old", name);
+ rename(name, oldname);
+ if (rename(tmpname, name))
return 1;
}
- conf_message("configuration written to %s", newname);
+ conf_message("configuration written to %s", name);
sym_set_change_count(0);
return 0;
}
-static int conf_split_config(void)
+/* write a dependency file as used by kbuild to track dependencies */
+static int conf_write_dep(const char *name)
+{
+ struct file *file;
+ FILE *out;
+
+ out = fopen("..config.tmp", "w");
+ if (!out)
+ return 1;
+ fprintf(out, "deps_config := \\\n");
+ for (file = file_list; file; file = file->next) {
+ if (file->next)
+ fprintf(out, "\t%s \\\n", file->name);
+ else
+ fprintf(out, "\t%s\n", file->name);
+ }
+ fprintf(out, "\n%s: \\\n"
+ "\t$(deps_config)\n\n", conf_get_autoconfig_name());
+
+ env_write_dep(out, conf_get_autoconfig_name());
+
+ fprintf(out, "\n$(deps_config): ;\n");
+ fclose(out);
+
+ if (make_parent_dir(name))
+ return 1;
+ rename("..config.tmp", name);
+ return 0;
+}
+
+static int conf_touch_deps(void)
{
const char *name;
- char path[PATH_MAX+1];
- char *s, *d, c;
struct symbol *sym;
- struct stat sb;
- int res, i, fd;
+ int res, i;
+
+ strcpy(depfile_path, "include/config/");
+ depfile_prefix_len = strlen(depfile_path);
name = conf_get_autoconfig_name();
conf_read_simple(name, S_DEF_AUTO);
+ sym_calc_value(modules_sym);
- if (chdir("include/config"))
- return 1;
-
- res = 0;
for_all_symbols(i, sym) {
sym_calc_value(sym);
- if ((sym->flags & SYMBOL_AUTO) || !sym->name)
+ if ((sym->flags & SYMBOL_NO_WRITE) || !sym->name)
continue;
if (sym->flags & SYMBOL_WRITE) {
if (sym->flags & SYMBOL_DEF_AUTO) {
@@ -902,63 +1049,28 @@ static int conf_split_config(void)
* different from 'no').
*/
- /* Replace all '_' and append ".h" */
- s = sym->name;
- d = path;
- while ((c = *s++)) {
- c = tolower(c);
- *d++ = (c == '_') ? '/' : c;
- }
- strcpy(d, ".h");
-
- /* Assume directory path already exists. */
- fd = open(path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
- if (fd == -1) {
- if (errno != ENOENT) {
- res = 1;
- break;
- }
- /*
- * Create directory components,
- * unless they exist already.
- */
- d = path;
- while ((d = strchr(d, '/'))) {
- *d = 0;
- if (stat(path, &sb) && mkdir(path, 0755)) {
- res = 1;
- goto out;
- }
- *d++ = '/';
- }
- /* Try it again. */
- fd = open(path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
- if (fd == -1) {
- res = 1;
- break;
- }
- }
- close(fd);
+ res = conf_touch_dep(sym->name);
+ if (res)
+ return res;
}
-out:
- if (chdir("../.."))
- return 1;
- return res;
+ return 0;
}
-int conf_write_autoconf(void)
+int conf_write_autoconf(int overwrite)
{
struct symbol *sym;
const char *name;
+ const char *autoconf_name = conf_get_autoconfig_name();
FILE *out, *tristate, *out_h;
int i;
- sym_clear_all_valid();
+ if (!overwrite && is_present(autoconf_name))
+ return 0;
- file_write_dep("include/config/auto.conf.cmd");
+ conf_write_dep("include/config/auto.conf.cmd");
- if (conf_split_config())
+ if (conf_touch_deps())
return 1;
out = fopen(".tmpconfig", "w");
@@ -1003,19 +1115,26 @@ int conf_write_autoconf(void)
name = getenv("KCONFIG_AUTOHEADER");
if (!name)
name = "include/generated/autoconf.h";
+ if (make_parent_dir(name))
+ return 1;
if (rename(".tmpconfig.h", name))
return 1;
+
name = getenv("KCONFIG_TRISTATE");
if (!name)
name = "include/config/tristate.conf";
+ if (make_parent_dir(name))
+ return 1;
if (rename(".tmpconfig_tristate", name))
return 1;
- name = conf_get_autoconfig_name();
+
+ if (make_parent_dir(autoconf_name))
+ return 1;
/*
* This must be the last step, kbuild has a dependency on auto.conf
* and this marks the successful completion of the previous steps.
*/
- if (rename(".tmpconfig", name))
+ if (rename(".tmpconfig", autoconf_name))
return 1;
return 0;
@@ -1119,7 +1238,7 @@ void set_all_choice_values(struct symbol *csym)
bool conf_set_all_new_symbols(enum conf_def_mode mode)
{
struct symbol *sym, *csym;
- int i, cnt, pby, pty, ptm; /* pby: probability of boolean = y
+ int i, cnt, pby, pty, ptm; /* pby: probability of bool = y
* pty: probability of tristate = y
* ptm: probability of tristate = m
*/
@@ -1,8 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
+#include <ctype.h>
+#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -94,7 +96,7 @@ struct expr *expr_copy(const struct expr *org)
e->right.expr = expr_copy(org->right.expr);
break;
default:
- printf("can't copy type %d\n", e->type);
+ fprintf(stderr, "can't copy type %d\n", e->type);
free(e);
e = NULL;
break;
@@ -113,7 +115,7 @@ void expr_free(struct expr *e)
break;
case E_NOT:
expr_free(e->left.expr);
- return;
+ break;
case E_EQUAL:
case E_GEQ:
case E_GTH:
@@ -127,7 +129,7 @@ void expr_free(struct expr *e)
expr_free(e->right.expr);
break;
default:
- printf("how to free type %d?\n", e->type);
+ fprintf(stderr, "how to free type %d?\n", e->type);
break;
}
free(e);
@@ -138,8 +140,18 @@ static int trans_count;
#define e1 (*ep1)
#define e2 (*ep2)
+/*
+ * expr_eliminate_eq() helper.
+ *
+ * Walks the two expression trees given in 'ep1' and 'ep2'. Any node that does
+ * not have type 'type' (E_OR/E_AND) is considered a leaf, and is compared
+ * against all other leaves. Two equal leaves are both replaced with either 'y'
+ * or 'n' as appropriate for 'type', to be eliminated later.
+ */
static void __expr_eliminate_eq(enum expr_type type, struct expr **ep1, struct expr **ep2)
{
+ /* Recurse down to leaves */
+
if (e1->type == type) {
__expr_eliminate_eq(type, &e1->left.expr, &e2);
__expr_eliminate_eq(type, &e1->right.expr, &e2);
@@ -150,12 +162,18 @@ static void __expr_eliminate_eq(enum expr_type type, struct expr **ep1, struct e
__expr_eliminate_eq(type, &e1, &e2->right.expr);
return;
}
+
+ /* e1 and e2 are leaves. Compare them. */
+
if (e1->type == E_SYMBOL && e2->type == E_SYMBOL &&
e1->left.sym == e2->left.sym &&
(e1->left.sym == &symbol_yes || e1->left.sym == &symbol_no))
return;
if (!expr_eq(e1, e2))
return;
+
+ /* e1 and e2 are equal leaves. Prepare them for elimination. */
+
trans_count++;
expr_free(e1); expr_free(e2);
switch (type) {
@@ -172,6 +190,35 @@ static void __expr_eliminate_eq(enum expr_type type, struct expr **ep1, struct e
}
}
+/*
+ * Rewrites the expressions 'ep1' and 'ep2' to remove operands common to both.
+ * Example reductions:
+ *
+ * ep1: A && B -> ep1: y
+ * ep2: A && B && C -> ep2: C
+ *
+ * ep1: A || B -> ep1: n
+ * ep2: A || B || C -> ep2: C
+ *
+ * ep1: A && (B && FOO) -> ep1: FOO
+ * ep2: (BAR && B) && A -> ep2: BAR
+ *
+ * ep1: A && (B || C) -> ep1: y
+ * ep2: (C || B) && A -> ep2: y
+ *
+ * Comparisons are done between all operands at the same "level" of && or ||.
+ * For example, in the expression 'e1 && (e2 || e3) && (e4 || e5)', the
+ * following operands will be compared:
+ *
+ * - 'e1', 'e2 || e3', and 'e4 || e5', against each other
+ * - e2 against e3
+ * - e4 against e5
+ *
+ * Parentheses are irrelevant within a single level. 'e1 && (e2 && e3)' and
+ * '(e1 && e2) && e3' are both a single level.
+ *
+ * See __expr_eliminate_eq() as well.
+ */
void expr_eliminate_eq(struct expr **ep1, struct expr **ep2)
{
if (!e1 || !e2)
@@ -197,6 +244,12 @@ void expr_eliminate_eq(struct expr **ep1, struct expr **ep2)
#undef e1
#undef e2
+/*
+ * Returns true if 'e1' and 'e2' are equal, after minor simplification. Two
+ * &&/|| expressions are considered equal if every operand in one expression
+ * equals some operand in the other (operands do not need to appear in the same
+ * order), recursively.
+ */
static int expr_eq(struct expr *e1, struct expr *e2)
{
int res, old_count;
@@ -243,6 +296,17 @@ static int expr_eq(struct expr *e1, struct expr *e2)
return 0;
}
+/*
+ * Recursively performs the following simplifications in-place (as well as the
+ * corresponding simplifications with swapped operands):
+ *
+ * expr && n -> n
+ * expr && y -> expr
+ * expr || n -> expr
+ * expr || y -> y
+ *
+ * Returns the optimized expression.
+ */
static struct expr *expr_eliminate_yn(struct expr *e)
{
struct expr *tmp;
@@ -516,12 +580,21 @@ static struct expr *expr_join_and(struct expr *e1, struct expr *e2)
return NULL;
}
+/*
+ * expr_eliminate_dups() helper.
+ *
+ * Walks the two expression trees given in 'ep1' and 'ep2'. Any node that does
+ * not have type 'type' (E_OR/E_AND) is considered a leaf, and is compared
+ * against all other leaves to look for simplifications.
+ */
static void expr_eliminate_dups1(enum expr_type type, struct expr **ep1, struct expr **ep2)
{
#define e1 (*ep1)
#define e2 (*ep2)
struct expr *tmp;
+ /* Recurse down to leaves */
+
if (e1->type == type) {
expr_eliminate_dups1(type, &e1->left.expr, &e2);
expr_eliminate_dups1(type, &e1->right.expr, &e2);
@@ -532,6 +605,9 @@ static void expr_eliminate_dups1(enum expr_type type, struct expr **ep1, struct
expr_eliminate_dups1(type, &e1, &e2->right.expr);
return;
}
+
+ /* e1 and e2 are leaves. Compare and process them. */
+
if (e1 == e2)
return;
@@ -568,6 +644,17 @@ static void expr_eliminate_dups1(enum expr_type type, struct expr **ep1, struct
#undef e2
}
+/*
+ * Rewrites 'e' in-place to remove ("join") duplicate and other redundant
+ * operands.
+ *
+ * Example simplifications:
+ *
+ * A || B || A -> A || B
+ * A && B && A=y -> A=y && B
+ *
+ * Returns the deduplicated expression.
+ */
struct expr *expr_eliminate_dups(struct expr *e)
{
int oldcount;
@@ -584,6 +671,7 @@ struct expr *expr_eliminate_dups(struct expr *e)
;
}
if (!trans_count)
+ /* No simplifications done in this pass. We're done */
break;
e = expr_eliminate_yn(e);
}
@@ -591,6 +679,12 @@ struct expr *expr_eliminate_dups(struct expr *e)
return e;
}
+/*
+ * Performs various simplifications involving logical operators and
+ * comparisons.
+ *
+ * Allocates and returns a new expression.
+ */
struct expr *expr_transform(struct expr *e)
{
struct expr *tmp;
@@ -805,6 +899,20 @@ bool expr_depends_symbol(struct expr *dep, struct symbol *sym)
return false;
}
+/*
+ * Inserts explicit comparisons of type 'type' to symbol 'sym' into the
+ * expression 'e'.
+ *
+ * Examples transformations for type == E_UNEQUAL, sym == &symbol_no:
+ *
+ * A -> A!=n
+ * !A -> A=n
+ * A && B -> !(A=n || B=n)
+ * A || B -> !(A=n && B=n)
+ * A && (B || C) -> !(A=n || (B=n && C=n))
+ *
+ * Allocates and returns a new expression.
+ */
struct expr *expr_trans_compare(struct expr *e, enum expr_type type, struct symbol *sym)
{
struct expr *e1, *e2;
@@ -874,7 +982,6 @@ enum string_value_kind {
k_string,
k_signed,
k_unsigned,
- k_invalid
};
union string_value {
@@ -893,7 +1000,10 @@ static enum string_value_kind expr_parse_string(const char *str,
switch (type) {
case S_BOOLEAN:
case S_TRISTATE:
- return k_string;
+ val->s = !strcmp(str, "n") ? 0 :
+ !strcmp(str, "m") ? 1 :
+ !strcmp(str, "y") ? 2 : -1;
+ return k_signed;
case S_INT:
val->s = strtoll(str, &tail, 10);
kind = k_signed;
@@ -902,13 +1012,10 @@ static enum string_value_kind expr_parse_string(const char *str,
val->u = strtoull(str, &tail, 16);
kind = k_unsigned;
break;
- case S_STRING:
- case S_UNKNOWN:
+ default:
val->s = strtoll(str, &tail, 0);
kind = k_signed;
break;
- default:
- return k_invalid;
}
return !errno && !*tail && tail > str && isxdigit(tail[-1])
? kind : k_string;
@@ -964,13 +1071,7 @@ tristate expr_calc_value(struct expr *e)
if (k1 == k_string || k2 == k_string)
res = strcmp(str1, str2);
- else if (k1 == k_invalid || k2 == k_invalid) {
- if (e->type != E_EQUAL && e->type != E_UNEQUAL) {
- printf("Cannot compare \"%s\" and \"%s\"\n", str1, str2);
- return no;
- }
- res = strcmp(str1, str2);
- } else if (k1 == k_unsigned || k2 == k_unsigned)
+ else if (k1 == k_unsigned || k2 == k_unsigned)
res = (lval.u > rval.u) - (lval.u < rval.u);
else /* if (k1 == k_signed && k2 == k_signed) */
res = (lval.s > rval.s) - (lval.s < rval.s);
@@ -1028,49 +1129,9 @@ static int expr_compare_type(enum expr_type t1, enum expr_type t2)
return 0;
}
-static inline struct expr *
-expr_get_leftmost_symbol(const struct expr *e)
-{
-
- if (e == NULL)
- return NULL;
-
- while (e->type != E_SYMBOL)
- e = e->left.expr;
-
- return expr_copy(e);
-}
-
-/*
- * Given expression `e1' and `e2', returns the leaf of the longest
- * sub-expression of `e1' not containing 'e2.
- */
-struct expr *expr_simplify_unmet_dep(struct expr *e1, struct expr *e2)
-{
- struct expr *ret;
-
- switch (e1->type) {
- case E_OR:
- return expr_alloc_and(
- expr_simplify_unmet_dep(e1->left.expr, e2),
- expr_simplify_unmet_dep(e1->right.expr, e2));
- case E_AND: {
- struct expr *e;
- e = expr_alloc_and(expr_copy(e1), expr_copy(e2));
- e = expr_eliminate_dups(e);
- ret = (!expr_eq(e, e1)) ? e1 : NULL;
- expr_free(e);
- break;
- }
- default:
- ret = e1;
- break;
- }
-
- return expr_get_leftmost_symbol(ret);
-}
-
-void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken)
+void expr_print(struct expr *e,
+ void (*fn)(void *, struct symbol *, const char *),
+ void *data, int prevtoken)
{
if (!e) {
fn(data, NULL, "y");
@@ -1113,7 +1174,7 @@ void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char *
fn(data, e->left.sym, e->left.sym->name);
else
fn(data, NULL, "<choice>");
- fn(data, NULL, e->type == E_LEQ ? ">=" : ">");
+ fn(data, NULL, e->type == E_GEQ ? ">=" : ">");
fn(data, e->right.sym, e->right.sym->name);
break;
case E_UNEQUAL:
@@ -1204,3 +1265,33 @@ void expr_gstr_print(struct expr *e, struct gstr *gs)
{
expr_print(e, expr_print_gstr_helper, gs, E_NONE);
}
+
+/*
+ * Transform the top level "||" tokens into newlines and prepend each
+ * line with a minus. This makes expressions much easier to read.
+ * Suitable for reverse dependency expressions.
+ */
+static void expr_print_revdep(struct expr *e,
+ void (*fn)(void *, struct symbol *, const char *),
+ void *data, tristate pr_type, const char **title)
+{
+ if (e->type == E_OR) {
+ expr_print_revdep(e->left.expr, fn, data, pr_type, title);
+ expr_print_revdep(e->right.expr, fn, data, pr_type, title);
+ } else if (expr_calc_value(e) == pr_type) {
+ if (*title) {
+ fn(data, NULL, *title);
+ *title = NULL;
+ }
+
+ fn(data, NULL, " - ");
+ expr_print(e, fn, data, E_NONE);
+ fn(data, NULL, "\n");
+ }
+}
+
+void expr_gstr_print_revdep(struct expr *e, struct gstr *gs,
+ tristate pr_type, const char *title)
+{
+ expr_print_revdep(e, expr_print_gstr_helper, gs, pr_type, &title);
+}
@@ -1,6 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
#ifndef EXPR_H
@@ -62,7 +62,7 @@ struct symbol_value {
};
enum symbol_type {
- S_UNKNOWN, S_BOOLEAN, S_TRISTATE, S_INT, S_HEX, S_STRING, S_OTHER
+ S_UNKNOWN, S_BOOLEAN, S_TRISTATE, S_INT, S_HEX, S_STRING
};
/* enum values are used as index to symbol.def[] */
@@ -74,20 +74,64 @@ enum {
S_DEF_COUNT
};
+/*
+ * Represents a configuration symbol.
+ *
+ * Choices are represented as a special kind of symbol and have the
+ * SYMBOL_CHOICE bit set in 'flags'.
+ */
struct symbol {
+ /* The next symbol in the same bucket in the symbol hash table */
struct symbol *next;
+
+ /* The name of the symbol, e.g. "FOO" for 'config FOO' */
char *name;
+
+ /* S_BOOLEAN, S_TRISTATE, ... */
enum symbol_type type;
+
+ /*
+ * The calculated value of the symbol. The SYMBOL_VALID bit is set in
+ * 'flags' when this is up to date. Note that this value might differ
+ * from the user value set in e.g. a .config file, due to visibility.
+ */
struct symbol_value curr;
+
+ /*
+ * Values for the symbol provided from outside. def[S_DEF_USER] holds
+ * the .config value.
+ */
struct symbol_value def[S_DEF_COUNT];
+
+ /*
+ * An upper bound on the tristate value the user can set for the symbol
+ * if it is a boolean or tristate. Calculated from prompt dependencies,
+ * which also inherit dependencies from enclosing menus, choices, and
+ * ifs. If 'n', the user value will be ignored.
+ *
+ * Symbols lacking prompts always have visibility 'n'.
+ */
tristate visible;
+
+ /* SYMBOL_* flags */
int flags;
+
+ /* List of properties. See prop_type. */
struct property *prop;
+
+ /* Dependencies from enclosing menus, choices, and ifs */
struct expr_value dir_dep;
+
+ /* Reverse dependencies through being selected by other symbols */
struct expr_value rev_dep;
+
+ /*
+ * "Weak" reverse dependencies through being implied by other symbols
+ */
+ struct expr_value implied;
};
-#define for_all_symbols(i, sym) for (i = 0; i < SYMBOL_HASHSIZE; i++) for (sym = symbol_hash[i]; sym; sym = sym->next) if (sym->type != S_OTHER)
+#define for_all_symbols(i, sym) for (i = 0; i < SYMBOL_HASHSIZE; i++) for (sym = symbol_hash[i]; sym; sym = sym->next)
#define SYMBOL_CONST 0x0001 /* symbol is const */
#define SYMBOL_CHECK 0x0008 /* used during dependency checking */
@@ -97,7 +141,8 @@ struct symbol {
#define SYMBOL_OPTIONAL 0x0100 /* choice is optional - values can be 'n' */
#define SYMBOL_WRITE 0x0200 /* write symbol to file (KCONFIG_CONFIG) */
#define SYMBOL_CHANGED 0x0400 /* ? */
-#define SYMBOL_AUTO 0x1000 /* value from environment variable */
+#define SYMBOL_WRITTEN 0x0800 /* track info to avoid double-write to .config */
+#define SYMBOL_NO_WRITE 0x1000 /* Symbol for internal use only; it will not be written */
#define SYMBOL_CHECKED 0x2000 /* used during dependency checking */
#define SYMBOL_WARNED 0x8000 /* warning has been issued */
@@ -127,17 +172,20 @@ struct symbol {
* config BAZ
* int "BAZ Value"
* range 1..255
+ *
+ * Please, also check parser.y:print_symbol() when modifying the
+ * list of property types!
*/
enum prop_type {
P_UNKNOWN,
P_PROMPT, /* prompt "foo prompt" or "BAZ Value" */
P_COMMENT, /* text associated with a comment */
- P_MENU, /* prompt associated with a menuconfig option */
+ P_MENU, /* prompt associated with a menu or menuconfig symbol */
P_DEFAULT, /* default y */
P_CHOICE, /* choice value */
P_SELECT, /* select BAR */
+ P_IMPLY, /* imply BAR */
P_RANGE, /* range 7..100 (for a symbol) */
- P_ENV, /* value from environment variable */
P_SYMBOL, /* where a symbol is defined */
};
@@ -164,22 +212,67 @@ struct property {
for (st = sym->prop; st; st = st->next) \
if (st->text)
+/*
+ * Represents a node in the menu tree, as seen in e.g. menuconfig (though used
+ * for all front ends). Each symbol, menu, etc. defined in the Kconfig files
+ * gets a node. A symbol defined in multiple locations gets one node at each
+ * location.
+ */
struct menu {
+ /* The next menu node at the same level */
struct menu *next;
+
+ /* The parent menu node, corresponding to e.g. a menu or choice */
struct menu *parent;
+
+ /* The first child menu node, for e.g. menus and choices */
struct menu *list;
+
+ /*
+ * The symbol associated with the menu node. Choices are implemented as
+ * a special kind of symbol. NULL for menus, comments, and ifs.
+ */
struct symbol *sym;
+
+ /*
+ * The prompt associated with the node. This holds the prompt for a
+ * symbol as well as the text for a menu or comment, along with the
+ * type (P_PROMPT, P_MENU, etc.)
+ */
struct property *prompt;
+
+ /*
+ * 'visible if' dependencies. If more than one is given, they will be
+ * ANDed together.
+ */
struct expr *visibility;
+
+ /*
+ * Ordinary dependencies from e.g. 'depends on' and 'if', ANDed
+ * together
+ */
struct expr *dep;
+
+ /* MENU_* flags */
unsigned int flags;
+
+ /* Any help text associated with the node */
char *help;
+
+ /* The location where the menu node appears in the Kconfig files */
struct file *file;
int lineno;
+
+ /* For use by front ends that need to store auxiliary data */
void *data;
};
+/*
+ * Set on a menu node when the corresponding symbol changes state in some way.
+ * Can be checked by front ends.
+ */
#define MENU_CHANGED 0x0001
+
#define MENU_ROOT 0x0002
struct jump_key {
@@ -215,11 +308,12 @@ struct expr *expr_transform(struct expr *e);
int expr_contains_symbol(struct expr *dep, struct symbol *sym);
bool expr_depends_symbol(struct expr *dep, struct symbol *sym);
struct expr *expr_trans_compare(struct expr *e, enum expr_type type, struct symbol *sym);
-struct expr *expr_simplify_unmet_dep(struct expr *e1, struct expr *e2);
void expr_fprint(struct expr *e, FILE *out);
struct gstr; /* forward */
void expr_gstr_print(struct expr *e, struct gstr *gs);
+void expr_gstr_print_revdep(struct expr *e, struct gstr *gs,
+ tristate pr_type, const char *title);
static inline int expr_is_yes(struct expr *e)
{
new file mode 100755
@@ -0,0 +1,30 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
+
+if [ -z "$(command -v pkg-config)" ]; then
+ echo >&2 "*"
+ echo >&2 "* 'make gconfig' requires 'pkg-config'. Please install it."
+ echo >&2 "*"
+ exit 1
+fi
+
+if ! pkg-config --exists $PKG; then
+ echo >&2 "*"
+ echo >&2 "* Unable to find the GTK+ installation. Please make sure that"
+ echo >&2 "* the GTK+ 2.0 development package is correctly installed."
+ echo >&2 "* You need $PKG"
+ echo >&2 "*"
+ exit 1
+fi
+
+if ! pkg-config --atleast-version=2.0.0 gtk+-2.0; then
+ echo >&2 "*"
+ echo >&2 "* GTK+ is present but version >= 2.0.0 is required."
+ echo >&2 "*"
+ exit 1
+fi
+
+echo cflags=\"$(pkg-config --cflags $PKG)\"
+echo libs=\"$(pkg-config --libs $PKG)\"
@@ -1,9 +1,6 @@
-/* Hey EMACS -*- linux-c -*- */
+// SPDX-License-Identifier: GPL-2.0
/*
- *
* Copyright (C) 2002-2003 Romain Lievin <roms@tilp.info>
- * Released under the terms of the GNU GPL v2.0.
- *
*/
#ifdef HAVE_CONFIG_H
@@ -12,7 +9,7 @@
#include <stdlib.h>
#include "lkc.h"
-#include "images.c"
+#include "images.h"
#include <glade/glade.h>
#include <gtk/gtk.h>
@@ -78,8 +75,8 @@ static gchar **fill_row(struct menu *menu);
static void conf_changed(void);
/* Helping/Debugging Functions */
-
-const char *dbg_sym_flags(int val)
+#ifdef DEBUG
+static const char *dbg_sym_flags(int val)
{
static char buf[256];
@@ -101,16 +98,17 @@ const char *dbg_sym_flags(int val)
strcat(buf, "write/");
if (val & SYMBOL_CHANGED)
strcat(buf, "changed/");
- if (val & SYMBOL_AUTO)
- strcat(buf, "auto/");
+ if (val & SYMBOL_NO_WRITE)
+ strcat(buf, "no_write/");
buf[strlen(buf) - 1] = '\0';
return buf;
}
+#endif
-void replace_button_icon(GladeXML * xml, GdkDrawable * window,
- GtkStyle * style, gchar * btn_name, gchar ** xpm)
+static void replace_button_icon(GladeXML *xml, GdkDrawable *window,
+ GtkStyle *style, gchar *btn_name, gchar **xpm)
{
GdkPixmap *pixmap;
GdkBitmap *mask;
@@ -128,7 +126,7 @@ void replace_button_icon(GladeXML * xml, GdkDrawable * window,
}
/* Main Window Initialization */
-void init_main_window(const gchar * glade_file)
+static void init_main_window(const gchar *glade_file)
{
GladeXML *xml;
GtkWidget *widget;
@@ -190,7 +188,7 @@ void init_main_window(const gchar * glade_file)
gtk_widget_show(main_wnd);
}
-void init_tree_model(void)
+static void init_tree_model(void)
{
gint i;
@@ -220,7 +218,7 @@ void init_tree_model(void)
model1 = GTK_TREE_MODEL(tree1);
}
-void init_left_tree(void)
+static void init_left_tree(void)
{
GtkTreeView *view = GTK_TREE_VIEW(tree1_w);
GtkCellRenderer *renderer;
@@ -262,7 +260,7 @@ static void renderer_edited(GtkCellRendererText * cell,
const gchar * path_string,
const gchar * new_text, gpointer user_data);
-void init_right_tree(void)
+static void init_right_tree(void)
{
GtkTreeView *view = GTK_TREE_VIEW(tree2_w);
GtkCellRenderer *renderer;
@@ -525,6 +523,7 @@ void on_save_activate(GtkMenuItem * menuitem, gpointer user_data)
{
if (conf_write(NULL))
text_insert_msg("Error", "Unable to save configuration !");
+ conf_write_autoconf(0);
}
@@ -639,7 +638,7 @@ on_set_option_mode3_activate(GtkMenuItem *menuitem, gpointer user_data)
void on_introduction1_activate(GtkMenuItem * menuitem, gpointer user_data)
{
GtkWidget *dialog;
- const gchar *intro_text =
+ const gchar *intro_text =
"Welcome to gkc, the GTK+ graphical configuration tool\n"
"For each option, a blank box indicates the feature is disabled, a\n"
"check indicates it is enabled, and a dot indicates that it is to\n"
@@ -914,7 +913,7 @@ on_treeview2_button_press_event(GtkWidget * widget,
current = menu;
display_tree_part();
gtk_widget_set_sensitive(back_btn, TRUE);
- } else if ((col == COL_OPTION)) {
+ } else if (col == COL_OPTION) {
toggle_sym_value(menu);
gtk_tree_view_expand_row(view, path, TRUE);
}
@@ -1211,8 +1210,8 @@ static GtkTreeIter found;
/*
* Find a menu in the GtkTree starting at parent.
*/
-GtkTreeIter *gtktree_iter_find_node(GtkTreeIter * parent,
- struct menu *tofind)
+static GtkTreeIter *gtktree_iter_find_node(GtkTreeIter *parent,
+ struct menu *tofind)
{
GtkTreeIter iter;
GtkTreeIter *child = &iter;
@@ -1423,7 +1422,7 @@ static void display_list(void)
tree = tree2;
}
-void fixup_rootmenu(struct menu *menu)
+static void fixup_rootmenu(struct menu *menu)
{
struct menu *child;
static int menu_cnt = 0;
@@ -1,9 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
-static const char *xpm_load[] = {
+#include "images.h"
+
+const char *xpm_load[] = {
"22 22 5 1",
". c None",
"# c #000000",
@@ -33,7 +35,7 @@ static const char *xpm_load[] = {
"###############.......",
"......................"};
-static const char *xpm_save[] = {
+const char *xpm_save[] = {
"22 22 5 1",
". c None",
"# c #000000",
@@ -63,7 +65,7 @@ static const char *xpm_save[] = {
"..##################..",
"......................"};
-static const char *xpm_back[] = {
+const char *xpm_back[] = {
"22 22 3 1",
". c None",
"# c #000083",
@@ -91,7 +93,7 @@ static const char *xpm_back[] = {
"......................",
"......................"};
-static const char *xpm_tree_view[] = {
+const char *xpm_tree_view[] = {
"22 22 2 1",
". c None",
"# c #000000",
@@ -118,7 +120,7 @@ static const char *xpm_tree_view[] = {
"......................",
"......................"};
-static const char *xpm_single_view[] = {
+const char *xpm_single_view[] = {
"22 22 2 1",
". c None",
"# c #000000",
@@ -145,7 +147,7 @@ static const char *xpm_single_view[] = {
"......................",
"......................"};
-static const char *xpm_split_view[] = {
+const char *xpm_split_view[] = {
"22 22 2 1",
". c None",
"# c #000000",
@@ -172,7 +174,7 @@ static const char *xpm_split_view[] = {
"......................",
"......................"};
-static const char *xpm_symbol_no[] = {
+const char *xpm_symbol_no[] = {
"12 12 2 1",
" c white",
". c black",
@@ -189,7 +191,7 @@ static const char *xpm_symbol_no[] = {
" .......... ",
" "};
-static const char *xpm_symbol_mod[] = {
+const char *xpm_symbol_mod[] = {
"12 12 2 1",
" c white",
". c black",
@@ -206,7 +208,7 @@ static const char *xpm_symbol_mod[] = {
" .......... ",
" "};
-static const char *xpm_symbol_yes[] = {
+const char *xpm_symbol_yes[] = {
"12 12 2 1",
" c white",
". c black",
@@ -223,7 +225,7 @@ static const char *xpm_symbol_yes[] = {
" .......... ",
" "};
-static const char *xpm_choice_no[] = {
+const char *xpm_choice_no[] = {
"12 12 2 1",
" c white",
". c black",
@@ -240,7 +242,7 @@ static const char *xpm_choice_no[] = {
" .... ",
" "};
-static const char *xpm_choice_yes[] = {
+const char *xpm_choice_yes[] = {
"12 12 2 1",
" c white",
". c black",
@@ -257,7 +259,7 @@ static const char *xpm_choice_yes[] = {
" .... ",
" "};
-static const char *xpm_menu[] = {
+const char *xpm_menu[] = {
"12 12 2 1",
" c white",
". c black",
@@ -274,7 +276,7 @@ static const char *xpm_menu[] = {
" .......... ",
" "};
-static const char *xpm_menu_inv[] = {
+const char *xpm_menu_inv[] = {
"12 12 2 1",
" c white",
". c black",
@@ -291,7 +293,7 @@ static const char *xpm_menu_inv[] = {
" .......... ",
" "};
-static const char *xpm_menuback[] = {
+const char *xpm_menuback[] = {
"12 12 2 1",
" c white",
". c black",
@@ -308,7 +310,7 @@ static const char *xpm_menuback[] = {
" .......... ",
" "};
-static const char *xpm_void[] = {
+const char *xpm_void[] = {
"12 12 2 1",
" c white",
". c black",
new file mode 100644
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ */
+
+#ifndef IMAGES_H
+#define IMAGES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern const char *xpm_load[];
+extern const char *xpm_save[];
+extern const char *xpm_back[];
+extern const char *xpm_tree_view[];
+extern const char *xpm_single_view[];
+extern const char *xpm_split_view[];
+extern const char *xpm_symbol_no[];
+extern const char *xpm_symbol_mod[];
+extern const char *xpm_symbol_yes[];
+extern const char *xpm_choice_no[];
+extern const char *xpm_choice_yes[];
+extern const char *xpm_menu[];
+extern const char *xpm_menu_inv[];
+extern const char *xpm_menuback[];
+extern const char *xpm_void[];
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* IMAGES_H */
new file mode 100644
@@ -0,0 +1,471 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ */
+%option nostdinit noyywrap never-interactive full ecs
+%option 8bit nodefault yylineno
+%x ASSIGN_VAL HELP STRING
+%{
+
+#include <assert.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "lkc.h"
+#include "parser.tab.h"
+
+#define YY_DECL static int yylex1(void)
+
+#define START_STRSIZE 16
+
+static struct {
+ struct file *file;
+ int lineno;
+} current_pos;
+
+static int prev_prev_token = T_EOL;
+static int prev_token = T_EOL;
+static char *text;
+static int text_size, text_asize;
+
+struct buffer {
+ struct buffer *parent;
+ YY_BUFFER_STATE state;
+};
+
+struct buffer *current_buf;
+
+static int last_ts, first_ts;
+
+static char *expand_token(const char *in, size_t n);
+static void append_expanded_string(const char *in);
+static void zconf_endhelp(void);
+static void zconf_endfile(void);
+
+static void new_string(void)
+{
+ text = xmalloc(START_STRSIZE);
+ text_asize = START_STRSIZE;
+ text_size = 0;
+ *text = 0;
+}
+
+static void append_string(const char *str, int size)
+{
+ int new_size = text_size + size + 1;
+ if (new_size > text_asize) {
+ new_size += START_STRSIZE - 1;
+ new_size &= -START_STRSIZE;
+ text = xrealloc(text, new_size);
+ text_asize = new_size;
+ }
+ memcpy(text + text_size, str, size);
+ text_size += size;
+ text[text_size] = 0;
+}
+
+static void alloc_string(const char *str, int size)
+{
+ text = xmalloc(size + 1);
+ memcpy(text, str, size);
+ text[size] = 0;
+}
+
+static void warn_ignored_character(char chr)
+{
+ fprintf(stderr,
+ "%s:%d:warning: ignoring unsupported character '%c'\n",
+ current_file->name, yylineno, chr);
+}
+%}
+
+n [A-Za-z0-9_-]
+
+%%
+ int str = 0;
+ int ts, i;
+
+#.* /* ignore comment */
+[ \t]* /* whitespaces */
+\\\n /* escaped new line */
+\n return T_EOL;
+"allnoconfig_y" return T_ALLNOCONFIG_Y;
+"bool" return T_BOOL;
+"choice" return T_CHOICE;
+"comment" return T_COMMENT;
+"config" return T_CONFIG;
+"def_bool" return T_DEF_BOOL;
+"def_tristate" return T_DEF_TRISTATE;
+"default" return T_DEFAULT;
+"defconfig_list" return T_DEFCONFIG_LIST;
+"depends" return T_DEPENDS;
+"endchoice" return T_ENDCHOICE;
+"endif" return T_ENDIF;
+"endmenu" return T_ENDMENU;
+"help"|"---help---" return T_HELP;
+"hex" return T_HEX;
+"if" return T_IF;
+"imply" return T_IMPLY;
+"int" return T_INT;
+"mainmenu" return T_MAINMENU;
+"menu" return T_MENU;
+"menuconfig" return T_MENUCONFIG;
+"modules" return T_MODULES;
+"on" return T_ON;
+"option" return T_OPTION;
+"optional" return T_OPTIONAL;
+"prompt" return T_PROMPT;
+"range" return T_RANGE;
+"select" return T_SELECT;
+"source" return T_SOURCE;
+"string" return T_STRING;
+"tristate" return T_TRISTATE;
+"visible" return T_VISIBLE;
+"||" return T_OR;
+"&&" return T_AND;
+"=" return T_EQUAL;
+"!=" return T_UNEQUAL;
+"<" return T_LESS;
+"<=" return T_LESS_EQUAL;
+">" return T_GREATER;
+">=" return T_GREATER_EQUAL;
+"!" return T_NOT;
+"(" return T_OPEN_PAREN;
+")" return T_CLOSE_PAREN;
+":=" return T_COLON_EQUAL;
+"+=" return T_PLUS_EQUAL;
+\"|\' {
+ str = yytext[0];
+ new_string();
+ BEGIN(STRING);
+ }
+{n}+ {
+ alloc_string(yytext, yyleng);
+ yylval.string = text;
+ return T_WORD;
+ }
+({n}|$)+ {
+ /* this token includes at least one '$' */
+ yylval.string = expand_token(yytext, yyleng);
+ if (strlen(yylval.string))
+ return T_WORD;
+ free(yylval.string);
+ }
+. warn_ignored_character(*yytext);
+
+<ASSIGN_VAL>{
+ [^[:blank:]\n]+.* {
+ alloc_string(yytext, yyleng);
+ yylval.string = text;
+ return T_ASSIGN_VAL;
+ }
+ \n { BEGIN(INITIAL); return T_EOL; }
+ .
+}
+
+<STRING>{
+ "$".* append_expanded_string(yytext);
+ [^$'"\\\n]+ {
+ append_string(yytext, yyleng);
+ }
+ \\.? {
+ append_string(yytext + 1, yyleng - 1);
+ }
+ \'|\" {
+ if (str == yytext[0]) {
+ BEGIN(INITIAL);
+ yylval.string = text;
+ return T_WORD_QUOTE;
+ } else
+ append_string(yytext, 1);
+ }
+ \n {
+ fprintf(stderr,
+ "%s:%d:warning: multi-line strings not supported\n",
+ zconf_curname(), zconf_lineno());
+ unput('\n');
+ BEGIN(INITIAL);
+ yylval.string = text;
+ return T_WORD_QUOTE;
+ }
+ <<EOF>> {
+ BEGIN(INITIAL);
+ yylval.string = text;
+ return T_WORD_QUOTE;
+ }
+}
+
+<HELP>{
+ [ \t]+ {
+ ts = 0;
+ for (i = 0; i < yyleng; i++) {
+ if (yytext[i] == '\t')
+ ts = (ts & ~7) + 8;
+ else
+ ts++;
+ }
+ last_ts = ts;
+ if (first_ts) {
+ if (ts < first_ts) {
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+ ts -= first_ts;
+ while (ts > 8) {
+ append_string(" ", 8);
+ ts -= 8;
+ }
+ append_string(" ", ts);
+ }
+ }
+ [ \t]*\n/[^ \t\n] {
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+ [ \t]*\n {
+ append_string("\n", 1);
+ }
+ [^ \t\n].* {
+ while (yyleng) {
+ if ((yytext[yyleng-1] != ' ') && (yytext[yyleng-1] != '\t'))
+ break;
+ yyleng--;
+ }
+ append_string(yytext, yyleng);
+ if (!first_ts)
+ first_ts = last_ts;
+ }
+ <<EOF>> {
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+}
+
+<<EOF>> {
+ BEGIN(INITIAL);
+
+ if (prev_token != T_EOL && prev_token != T_HELPTEXT)
+ fprintf(stderr, "%s:%d:warning: no new line at end of file\n",
+ current_file->name, yylineno);
+
+ if (current_file) {
+ zconf_endfile();
+ return T_EOL;
+ }
+ fclose(yyin);
+ yyterminate();
+}
+
+%%
+
+/* second stage lexer */
+int yylex(void)
+{
+ int token;
+
+repeat:
+ token = yylex1();
+
+ if (prev_token == T_EOL || prev_token == T_HELPTEXT) {
+ if (token == T_EOL) {
+ /* Do not pass unneeded T_EOL to the parser. */
+ goto repeat;
+ } else {
+ /*
+ * For the parser, update file/lineno at the first token
+ * of each statement. Generally, \n is a statement
+ * terminator in Kconfig, but it is not always true
+ * because \n could be escaped by a backslash.
+ */
+ current_pos.file = current_file;
+ current_pos.lineno = yylineno;
+ }
+ }
+
+ if (prev_prev_token == T_EOL && prev_token == T_WORD &&
+ (token == T_EQUAL || token == T_COLON_EQUAL || token == T_PLUS_EQUAL))
+ BEGIN(ASSIGN_VAL);
+
+ prev_prev_token = prev_token;
+ prev_token = token;
+
+ return token;
+}
+
+static char *expand_token(const char *in, size_t n)
+{
+ char *out;
+ int c;
+ char c2;
+ const char *rest, *end;
+
+ new_string();
+ append_string(in, n);
+
+ /* get the whole line because we do not know the end of token. */
+ while ((c = input()) != EOF) {
+ if (c == '\n') {
+ unput(c);
+ break;
+ }
+ c2 = c;
+ append_string(&c2, 1);
+ }
+
+ rest = text;
+ out = expand_one_token(&rest);
+
+ /* push back unused characters to the input stream */
+ end = rest + strlen(rest);
+ while (end > rest)
+ unput(*--end);
+
+ free(text);
+
+ return out;
+}
+
+static void append_expanded_string(const char *str)
+{
+ const char *end;
+ char *res;
+
+ str++;
+
+ res = expand_dollar(&str);
+
+ /* push back unused characters to the input stream */
+ end = str + strlen(str);
+ while (end > str)
+ unput(*--end);
+
+ append_string(res, strlen(res));
+
+ free(res);
+}
+
+void zconf_starthelp(void)
+{
+ new_string();
+ last_ts = first_ts = 0;
+ BEGIN(HELP);
+}
+
+static void zconf_endhelp(void)
+{
+ yylval.string = text;
+ BEGIN(INITIAL);
+}
+
+
+/*
+ * Try to open specified file with following names:
+ * ./name
+ * $(srctree)/name
+ * The latter is used when srctree is separate from objtree
+ * when compiling the kernel.
+ * Return NULL if file is not found.
+ */
+FILE *zconf_fopen(const char *name)
+{
+ char *env, fullname[PATH_MAX+1];
+ FILE *f;
+
+ f = fopen(name, "r");
+ if (!f && name != NULL && name[0] != '/') {
+ env = getenv(SRCTREE);
+ if (env) {
+ snprintf(fullname, sizeof(fullname),
+ "%s/%s", env, name);
+ f = fopen(fullname, "r");
+ }
+ }
+ return f;
+}
+
+void zconf_initscan(const char *name)
+{
+ yyin = zconf_fopen(name);
+ if (!yyin) {
+ fprintf(stderr, "can't find file %s\n", name);
+ exit(1);
+ }
+
+ current_buf = xmalloc(sizeof(*current_buf));
+ memset(current_buf, 0, sizeof(*current_buf));
+
+ current_file = file_lookup(name);
+ yylineno = 1;
+}
+
+void zconf_nextfile(const char *name)
+{
+ struct file *iter;
+ struct file *file = file_lookup(name);
+ struct buffer *buf = xmalloc(sizeof(*buf));
+ memset(buf, 0, sizeof(*buf));
+
+ current_buf->state = YY_CURRENT_BUFFER;
+ yyin = zconf_fopen(file->name);
+ if (!yyin) {
+ fprintf(stderr, "%s:%d: can't open file \"%s\"\n",
+ zconf_curname(), zconf_lineno(), file->name);
+ exit(1);
+ }
+ yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
+ buf->parent = current_buf;
+ current_buf = buf;
+
+ current_file->lineno = yylineno;
+ file->parent = current_file;
+
+ for (iter = current_file; iter; iter = iter->parent) {
+ if (!strcmp(iter->name, file->name)) {
+ fprintf(stderr,
+ "Recursive inclusion detected.\n"
+ "Inclusion path:\n"
+ " current file : %s\n", file->name);
+ iter = file;
+ do {
+ iter = iter->parent;
+ fprintf(stderr, " included from: %s:%d\n",
+ iter->name, iter->lineno - 1);
+ } while (strcmp(iter->name, file->name));
+ exit(1);
+ }
+ }
+
+ yylineno = 1;
+ current_file = file;
+}
+
+static void zconf_endfile(void)
+{
+ struct buffer *parent;
+
+ current_file = current_file->parent;
+ if (current_file)
+ yylineno = current_file->lineno;
+
+ parent = current_buf->parent;
+ if (parent) {
+ fclose(yyin);
+ yy_delete_buffer(YY_CURRENT_BUFFER);
+ yy_switch_to_buffer(parent->state);
+ }
+ free(current_buf);
+ current_buf = parent;
+}
+
+int zconf_lineno(void)
+{
+ return current_pos.lineno;
+}
+
+const char *zconf_curname(void)
+{
+ return current_pos.file ? current_pos.file->name : "<none>";
+}
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
#ifndef LIST_H
#define LIST_H
@@ -1,6 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
#ifndef LKC_H
@@ -30,10 +30,6 @@ static inline const char *CONFIG_prefix(void)
#undef CONFIG_
#define CONFIG_ CONFIG_prefix()
-#define TF_COMMAND 0x0001
-#define TF_PARAM 0x0002
-#define TF_OPTION 0x0004
-
enum conf_def_mode {
def_default,
def_yes,
@@ -42,18 +38,7 @@ enum conf_def_mode {
def_random
};
-#define T_OPT_MODULES 1
-#define T_OPT_DEFCONFIG_LIST 2
-#define T_OPT_ENV 3
-#define T_OPT_ALLNOCONFIG_Y 4
-
-struct kconf_id {
- int name;
- int token;
- unsigned int flags;
- enum symbol_type stype;
-};
-
+extern int yylineno;
void zconfdump(FILE *out);
void zconf_starthelp(void);
FILE *zconf_fopen(const char *name);
@@ -64,8 +49,6 @@ const char *zconf_curname(void);
/* confdata.c */
const char *conf_get_configname(void);
-const char *conf_get_autoconfig_name(void);
-char *conf_get_default_confname(void);
void sym_set_change_count(int count);
void sym_add_change_count(int count);
bool conf_set_all_new_symbols(enum conf_def_mode mode);
@@ -86,21 +69,27 @@ void menu_warn(struct menu *menu, const char *fmt, ...);
struct menu *menu_add_menu(void);
void menu_end_menu(void);
void menu_add_entry(struct symbol *sym);
-void menu_end_entry(void);
void menu_add_dep(struct expr *dep);
void menu_add_visibility(struct expr *dep);
struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep);
-void menu_add_option(int token, char *arg);
+void menu_add_option_modules(void);
+void menu_add_option_defconfig_list(void);
+void menu_add_option_allnoconfig_y(void);
void menu_finalize(struct menu *parent);
void menu_set_type(int type);
/* util.c */
struct file *file_lookup(const char *name);
-int file_write_dep(const char *name);
void *xmalloc(size_t size);
void *xcalloc(size_t nmemb, size_t size);
+void *xrealloc(void *p, size_t size);
+char *xstrdup(const char *s);
+char *xstrndup(const char *s, size_t n);
+
+/* lexer.l */
+int yylex(void);
struct gstr {
size_t len;
@@ -118,16 +107,13 @@ void str_printf(struct gstr *gs, const char *fmt, ...);
const char *str_get(struct gstr *gs);
/* symbol.c */
-extern struct expr *sym_env_list;
-
-void sym_init(void);
void sym_clear_all_valid(void);
struct symbol *sym_choice_default(struct symbol *sym);
+struct property *sym_get_range_prop(struct symbol *sym);
const char *sym_get_string_default(struct symbol *sym);
struct symbol *sym_check_deps(struct symbol *sym);
struct property *prop_alloc(enum prop_type type, struct symbol *sym);
struct symbol *prop_get_symbol(struct property *prop);
-struct property *sym_get_env_prop(struct symbol *sym);
static inline tristate sym_get_tristate_value(struct symbol *sym)
{
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
#include <stdarg.h>
/* confdata.c */
@@ -6,10 +7,10 @@ int conf_read(const char *name);
int conf_read_simple(const char *name, int);
int conf_write_defconfig(const char *name);
int conf_write(const char *name);
-int conf_write_autoconf(void);
+int conf_write_autoconf(int overwrite);
bool conf_get_changed(void);
void conf_set_changed_callback(void (*fn)(void));
-void conf_set_message_callback(void (*fn)(const char *fmt, va_list ap));
+void conf_set_message_callback(void (*fn)(const char *s));
/* menu.c */
extern struct menu rootmenu;
@@ -30,7 +31,6 @@ extern struct symbol * symbol_hash[SYMBOL_HASHSIZE];
struct symbol * sym_lookup(const char *name, int flags);
struct symbol * sym_find(const char *name);
-const char * sym_expand_string_value(const char *in);
const char * sym_escape_string_value(const char *in);
struct symbol ** sym_re_search(const char *pattern);
const char * sym_type_name(enum symbol_type type);
@@ -42,11 +42,24 @@ tristate sym_toggle_tristate_value(struct symbol *sym);
bool sym_string_valid(struct symbol *sym, const char *newval);
bool sym_string_within_range(struct symbol *sym, const char *str);
bool sym_set_string_value(struct symbol *sym, const char *newval);
-bool sym_is_changable(struct symbol *sym);
+bool sym_is_changeable(struct symbol *sym);
struct property * sym_get_choice_prop(struct symbol *sym);
const char * sym_get_string_value(struct symbol *sym);
const char * prop_get_type_name(enum prop_type type);
+/* preprocess.c */
+enum variable_flavor {
+ VAR_SIMPLE,
+ VAR_RECURSIVE,
+ VAR_APPEND,
+};
+void env_write_dep(FILE *f, const char *auto_conf_name);
+void variable_add(const char *name, const char *value,
+ enum variable_flavor flavor);
+void variable_all_del(void);
+char *expand_dollar(const char **str);
+char *expand_one_token(const char **str);
+
/* expr.c */
void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken);
deleted file mode 100644
@@ -1,4 +0,0 @@
-#
-# Generated files
-#
-lxdialog
@@ -1,4 +1,4 @@
This is NOT the official version of dialog. This version has been
significantly modified from the original. It is for use by the Linux
-kernel configuration script. Please do not bother Savio Lam with
+kernel configuration script. Please do not bother Savio Lam with
questions about this program.
deleted file mode 100755
@@ -1,91 +0,0 @@
-#!/bin/sh
-# Check ncurses compatibility
-
-# What library to link
-ldflags()
-{
- pkg-config --libs ncursesw 2>/dev/null && exit
- pkg-config --libs ncurses 2>/dev/null && exit
- for ext in so a dll.a dylib ; do
- for lib in ncursesw ncurses curses ; do
- $cc -print-file-name=lib${lib}.${ext} | grep -q /
- if [ $? -eq 0 ]; then
- echo "-l${lib}"
- exit
- fi
- done
- done
- exit 1
-}
-
-# Where is ncurses.h?
-ccflags()
-{
- if pkg-config --cflags ncursesw 2>/dev/null; then
- echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1'
- elif pkg-config --cflags ncurses 2>/dev/null; then
- echo '-DCURSES_LOC="<ncurses.h>"'
- elif [ -f /usr/include/ncursesw/curses.h ]; then
- echo '-I/usr/include/ncursesw -DCURSES_LOC="<curses.h>"'
- echo ' -DNCURSES_WIDECHAR=1'
- elif [ -f /usr/include/ncurses/ncurses.h ]; then
- echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
- elif [ -f /usr/include/ncurses/curses.h ]; then
- echo '-I/usr/include/ncurses -DCURSES_LOC="<curses.h>"'
- elif [ -f /usr/include/ncurses.h ]; then
- echo '-DCURSES_LOC="<ncurses.h>"'
- else
- echo '-DCURSES_LOC="<curses.h>"'
- fi
-}
-
-# Temp file, try to clean up after us
-tmp=.lxdialog.tmp
-trap "rm -f $tmp" 0 1 2 3 15
-
-# Check if we can link to ncurses
-check() {
- $cc -x c - -o $tmp 2>/dev/null <<'EOF'
-#include CURSES_LOC
-main() {}
-EOF
- if [ $? != 0 ]; then
- echo " *** Unable to find the ncurses libraries or the" 1>&2
- echo " *** required header files." 1>&2
- echo " *** 'make menuconfig' requires the ncurses libraries." 1>&2
- echo " *** " 1>&2
- echo " *** Install ncurses (ncurses-devel) and try again." 1>&2
- echo " *** " 1>&2
- exit 1
- fi
-}
-
-usage() {
- printf "Usage: $0 [-check compiler options|-ccflags|-ldflags compiler options]\n"
-}
-
-if [ $# -eq 0 ]; then
- usage
- exit 1
-fi
-
-cc=""
-case "$1" in
- "-check")
- shift
- cc="$@"
- check
- ;;
- "-ccflags")
- ccflags
- ;;
- "-ldflags")
- shift
- cc="$@"
- ldflags
- ;;
- "*")
- usage
- exit 1
- ;;
-esac
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* checklist.c -- implements the checklist box
*
@@ -5,20 +6,6 @@
* Stuart Herbert - S.Herbert@sheffield.ac.uk: radiolist extension
* Alessandro Rubini - rubini@ipvvis.unipv.it: merged the two
* MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "dialog.h"
@@ -1,21 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* dialog.h -- common declarations for all dialog modules
*
* AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <sys/types.h>
@@ -29,7 +16,7 @@
#ifdef __sun__
#define CURS_MACROS
#endif
-#include CURSES_LOC
+#include <ncurses.h>
/*
* Colors in ncurses 1.9.9e do not work properly since foreground and
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* inputbox.c -- implements the input box
*
* ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
* MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "dialog.h"
@@ -126,7 +113,8 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width
case KEY_DOWN:
break;
case KEY_BACKSPACE:
- case 127:
+ case 8: /* ^H */
+ case 127: /* ^? */
if (pos) {
wattrset(dialog, dlg.inputbox.atr);
if (input_x == 0) {
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* menubox.c -- implements the menu box
*
* ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
* MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcapw@cfw.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* textbox.c -- implements the text box
*
* ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
* MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "dialog.h"
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* util.c
*
* ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
* MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <stdarg.h>
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* yesno.c -- implements the yes/no box
*
* ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
* MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "dialog.h"
new file mode 100755
@@ -0,0 +1,47 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+PKG="ncursesw"
+PKG2="ncurses"
+
+if [ -n "$(command -v pkg-config)" ]; then
+ if pkg-config --exists $PKG; then
+ echo cflags=\"$(pkg-config --cflags $PKG)\"
+ echo libs=\"$(pkg-config --libs $PKG)\"
+ exit 0
+ fi
+
+ if pkg-config --exists $PKG2; then
+ echo cflags=\"$(pkg-config --cflags $PKG2)\"
+ echo libs=\"$(pkg-config --libs $PKG2)\"
+ exit 0
+ fi
+fi
+
+# Check the default paths in case pkg-config is not installed.
+# (Even if it is installed, some distributions such as openSUSE cannot
+# find ncurses by pkg-config.)
+if [ -f /usr/include/ncursesw/ncurses.h ]; then
+ echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
+ echo libs=\"-lncursesw\"
+ exit 0
+fi
+
+if [ -f /usr/include/ncurses/ncurses.h ]; then
+ echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
+ echo libs=\"-lncurses\"
+ exit 0
+fi
+
+if [ -f /usr/include/ncurses.h ]; then
+ echo cflags=\"-D_GNU_SOURCE\"
+ echo libs=\"-lncurses\"
+ exit 0
+fi
+
+echo >&2 "*"
+echo >&2 "* Unable to find the ncurses package."
+echo >&2 "* Install ncurses (ncurses-devel or libncurses-dev"
+echo >&2 "* depending on your distribution)."
+echo >&2 "*"
+exit 1
@@ -1,6 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*
* Introduced single menu mode (show all sub-menus in one large tree).
* 2002-11-06 Petr Baudis <pasky@ucw.cz>
@@ -245,7 +245,7 @@ search_help[] =
" Selected by: BAR [=n]\n"
"-----------------------------------------------------------------\n"
"o The line 'Type:' shows the type of the configuration option for\n"
- " this symbol (boolean, tristate, string, ...)\n"
+ " this symbol (bool, tristate, string, ...)\n"
"o The line 'Prompt:' shows the text used in the menu structure for\n"
" this symbol\n"
"o The 'Defined at' line tells at what file / line number the symbol\n"
@@ -490,7 +490,6 @@ static void build_conf(struct menu *menu)
switch (prop->type) {
case P_MENU:
child_count++;
- prompt = prompt;
if (single_menu_mode) {
item_make("%s%*c%s",
menu->data ? "-->" : "++>",
@@ -537,7 +536,7 @@ static void build_conf(struct menu *menu)
}
val = sym_get_tristate_value(sym);
- if (sym_is_changable(sym)) {
+ if (sym_is_changeable(sym)) {
switch (type) {
case S_BOOLEAN:
item_make("[%c]", val == no ? ' ' : '*');
@@ -588,7 +587,7 @@ static void build_conf(struct menu *menu)
} else {
switch (type) {
case S_BOOLEAN:
- if (sym_is_changable(sym))
+ if (sym_is_changeable(sym))
item_make("[%c]", val == no ? ' ' : '*');
else
item_make("-%c-", val == no ? ' ' : '*');
@@ -601,7 +600,7 @@ static void build_conf(struct menu *menu)
case mod: ch = 'M'; break;
default: ch = ' '; break;
}
- if (sym_is_changable(sym)) {
+ if (sym_is_changeable(sym)) {
if (sym->rev_dep.tri == mod)
item_make("{%c}", ch);
else
@@ -618,7 +617,7 @@ static void build_conf(struct menu *menu)
if (tmp < 0)
tmp = 0;
item_add_str("%*c%s%s", tmp, ' ', menu_get_prompt(menu),
- (sym_has_value(sym) || !sym_is_changable(sym)) ?
+ (sym_has_value(sym) || !sym_is_changeable(sym)) ?
"" : " (NEW)");
item_set_tag('s');
item_set_data(menu);
@@ -626,7 +625,7 @@ static void build_conf(struct menu *menu)
}
}
item_add_str("%*c%s%s", indent + 1, ' ', menu_get_prompt(menu),
- (sym_has_value(sym) || !sym_is_changable(sym)) ?
+ (sym_has_value(sym) || !sym_is_changeable(sym)) ?
"" : " (NEW)");
if (menu->prompt->type == P_MENU) {
item_add_str(" %s", menu_is_empty(menu) ? "----" : "--->");
@@ -772,16 +771,13 @@ static void show_helptext(const char *title, const char *text)
show_textbox(title, text, 0, 0);
}
-static void conf_message_callback(const char *fmt, va_list ap)
+static void conf_message_callback(const char *s)
{
- char buf[PATH_MAX+1];
-
- vsnprintf(buf, sizeof(buf), fmt, ap);
if (save_and_exit) {
if (!silent)
- printf("%s", buf);
+ printf("%s", s);
} else {
- show_textbox(NULL, buf, 6, 60);
+ show_textbox(NULL, s, 6, 60);
}
}
@@ -940,7 +936,7 @@ static void conf_save(void)
set_config_filename(dialog_input_result);
return;
}
- show_textbox(NULL, "Can't create file! Probably a nonexistent directory.", 5, 60);
+ show_textbox(NULL, "Can't create file!", 5, 60);
break;
case 1:
show_helptext("Save Alternate Configuration", save_config_help);
@@ -977,6 +973,7 @@ static int handle_exit(void)
"\n\n");
return 1;
}
+ conf_write_autoconf(0);
/* fall through */
case -1:
if (!silent)
@@ -1,6 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
#include <ctype.h>
@@ -62,13 +62,8 @@ void menu_add_entry(struct symbol *sym)
menu_add_symbol(P_SYMBOL, sym, NULL);
}
-void menu_end_entry(void)
-{
-}
-
struct menu *menu_add_menu(void)
{
- menu_end_entry();
last_entry_ptr = ¤t_entry->list;
return current_menu = current_entry;
}
@@ -79,19 +74,23 @@ void menu_end_menu(void)
current_menu = current_menu->parent;
}
-static struct expr *menu_check_dep(struct expr *e)
+/*
+ * Rewrites 'm' to 'm' && MODULES, so that it evaluates to 'n' when running
+ * without modules
+ */
+static struct expr *rewrite_m(struct expr *e)
{
if (!e)
return e;
switch (e->type) {
case E_NOT:
- e->left.expr = menu_check_dep(e->left.expr);
+ e->left.expr = rewrite_m(e->left.expr);
break;
case E_OR:
case E_AND:
- e->left.expr = menu_check_dep(e->left.expr);
- e->right.expr = menu_check_dep(e->right.expr);
+ e->left.expr = rewrite_m(e->left.expr);
+ e->right.expr = rewrite_m(e->right.expr);
break;
case E_SYMBOL:
/* change 'm' into 'm' && MODULES */
@@ -106,7 +105,7 @@ static struct expr *menu_check_dep(struct expr *e)
void menu_add_dep(struct expr *dep)
{
- current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep));
+ current_entry->dep = expr_alloc_and(current_entry->dep, dep);
}
void menu_set_type(int type)
@@ -131,7 +130,7 @@ static struct property *menu_add_prop(enum prop_type type, char *prompt, struct
prop->menu = current_entry;
prop->expr = expr;
- prop->visible.expr = menu_check_dep(dep);
+ prop->visible.expr = dep;
if (prompt) {
if (isspace(*prompt)) {
@@ -196,31 +195,26 @@ void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep)
menu_add_prop(type, NULL, expr_alloc_symbol(sym), dep);
}
-void menu_add_option(int token, char *arg)
+void menu_add_option_modules(void)
{
- switch (token) {
- case T_OPT_MODULES:
- if (modules_sym)
- zconf_error("symbol '%s' redefines option 'modules'"
- " already defined by symbol '%s'",
- current_entry->sym->name,
- modules_sym->name
- );
- modules_sym = current_entry->sym;
- break;
- case T_OPT_DEFCONFIG_LIST:
- if (!sym_defconfig_list)
- sym_defconfig_list = current_entry->sym;
- else if (sym_defconfig_list != current_entry->sym)
- zconf_error("trying to redefine defconfig symbol");
- break;
- case T_OPT_ENV:
- prop_add_env(arg);
- break;
- case T_OPT_ALLNOCONFIG_Y:
- current_entry->sym->flags |= SYMBOL_ALLNOCONFIG_Y;
- break;
- }
+ if (modules_sym)
+ zconf_error("symbol '%s' redefines option 'modules' already defined by symbol '%s'",
+ current_entry->sym->name, modules_sym->name);
+ modules_sym = current_entry->sym;
+}
+
+void menu_add_option_defconfig_list(void)
+{
+ if (!sym_defconfig_list)
+ sym_defconfig_list = current_entry->sym;
+ else if (sym_defconfig_list != current_entry->sym)
+ zconf_error("trying to redefine defconfig symbol");
+ sym_defconfig_list->flags |= SYMBOL_NO_WRITE;
+}
+
+void menu_add_option_allnoconfig_y(void)
+{
+ current_entry->sym->flags |= SYMBOL_ALLNOCONFIG_Y;
}
static int menu_validate_number(struct symbol *sym, struct symbol *sym2)
@@ -233,6 +227,8 @@ static void sym_check_prop(struct symbol *sym)
{
struct property *prop;
struct symbol *sym2;
+ char *use;
+
for (prop = sym->prop; prop; prop = prop->next) {
switch (prop->type) {
case P_DEFAULT:
@@ -250,20 +246,32 @@ static void sym_check_prop(struct symbol *sym)
"'%s': number is invalid",
sym->name);
}
+ if (sym_is_choice(sym)) {
+ struct property *choice_prop =
+ sym_get_choice_prop(sym2);
+
+ if (!choice_prop ||
+ prop_get_symbol(choice_prop) != sym)
+ prop_warn(prop,
+ "choice default symbol '%s' is not contained in the choice",
+ sym2->name);
+ }
break;
case P_SELECT:
+ case P_IMPLY:
+ use = prop->type == P_SELECT ? "select" : "imply";
sym2 = prop_get_symbol(prop);
if (sym->type != S_BOOLEAN && sym->type != S_TRISTATE)
prop_warn(prop,
- "config symbol '%s' uses select, but is "
- "not boolean or tristate", sym->name);
+ "config symbol '%s' uses %s, but is "
+ "not bool or tristate", sym->name, use);
else if (sym2->type != S_UNKNOWN &&
sym2->type != S_BOOLEAN &&
sym2->type != S_TRISTATE)
prop_warn(prop,
- "'%s' has wrong type. 'select' only "
- "accept arguments of boolean and "
- "tristate type", sym2->name);
+ "'%s' has wrong type. '%s' only "
+ "accept arguments of bool and "
+ "tristate type", sym2->name, use);
break;
case P_RANGE:
if (sym->type != S_INT && sym->type != S_HEX)
@@ -288,6 +296,11 @@ void menu_finalize(struct menu *parent)
sym = parent->sym;
if (parent->list) {
+ /*
+ * This menu node has children. We (recursively) process them
+ * and propagate parent dependencies before moving on.
+ */
+
if (sym && sym_is_choice(sym)) {
if (sym->type == S_UNKNOWN) {
/* find the first choice value to find out choice type */
@@ -305,65 +318,169 @@ void menu_finalize(struct menu *parent)
if (menu->sym && menu->sym->type == S_UNKNOWN)
menu_set_type(sym->type);
}
+
+ /*
+ * Use the choice itself as the parent dependency of
+ * the contained items. This turns the mode of the
+ * choice into an upper bound on the visibility of the
+ * choice value symbols.
+ */
parentdep = expr_alloc_symbol(sym);
} else if (parent->prompt)
+ /* Menu node for 'menu' */
parentdep = parent->prompt->visible.expr;
else
+ /* Menu node for 'if' */
parentdep = parent->dep;
+ /* For each child menu node... */
for (menu = parent->list; menu; menu = menu->next) {
- basedep = expr_transform(menu->dep);
+ /*
+ * Propagate parent dependencies to the child menu
+ * node, also rewriting and simplifying expressions
+ */
+ basedep = rewrite_m(menu->dep);
+ basedep = expr_transform(basedep);
basedep = expr_alloc_and(expr_copy(parentdep), basedep);
basedep = expr_eliminate_dups(basedep);
menu->dep = basedep;
+
if (menu->sym)
+ /*
+ * Note: For symbols, all prompts are included
+ * too in the symbol's own property list
+ */
prop = menu->sym->prop;
else
+ /*
+ * For non-symbol menu nodes, we just need to
+ * handle the prompt
+ */
prop = menu->prompt;
+
+ /* For each property... */
for (; prop; prop = prop->next) {
if (prop->menu != menu)
+ /*
+ * Two possibilities:
+ *
+ * 1. The property lacks dependencies
+ * and so isn't location-specific,
+ * e.g. an 'option'
+ *
+ * 2. The property belongs to a symbol
+ * defined in multiple locations and
+ * is from some other location. It
+ * will be handled there in that
+ * case.
+ *
+ * Skip the property.
+ */
continue;
- dep = expr_transform(prop->visible.expr);
+
+ /*
+ * Propagate parent dependencies to the
+ * property's condition, rewriting and
+ * simplifying expressions at the same time
+ */
+ dep = rewrite_m(prop->visible.expr);
+ dep = expr_transform(dep);
dep = expr_alloc_and(expr_copy(basedep), dep);
dep = expr_eliminate_dups(dep);
if (menu->sym && menu->sym->type != S_TRISTATE)
dep = expr_trans_bool(dep);
prop->visible.expr = dep;
+
+ /*
+ * Handle selects and implies, which modify the
+ * dependencies of the selected/implied symbol
+ */
if (prop->type == P_SELECT) {
struct symbol *es = prop_get_symbol(prop);
es->rev_dep.expr = expr_alloc_or(es->rev_dep.expr,
expr_alloc_and(expr_alloc_symbol(menu->sym), expr_copy(dep)));
+ } else if (prop->type == P_IMPLY) {
+ struct symbol *es = prop_get_symbol(prop);
+ es->implied.expr = expr_alloc_or(es->implied.expr,
+ expr_alloc_and(expr_alloc_symbol(menu->sym), expr_copy(dep)));
}
}
}
+
+ if (sym && sym_is_choice(sym))
+ expr_free(parentdep);
+
+ /*
+ * Recursively process children in the same fashion before
+ * moving on
+ */
for (menu = parent->list; menu; menu = menu->next)
menu_finalize(menu);
} else if (sym) {
+ /*
+ * Automatic submenu creation. If sym is a symbol and A, B, C,
+ * ... are consecutive items (symbols, menus, ifs, etc.) that
+ * all depend on sym, then the following menu structure is
+ * created:
+ *
+ * sym
+ * +-A
+ * +-B
+ * +-C
+ * ...
+ *
+ * This also works recursively, giving the following structure
+ * if A is a symbol and B depends on A:
+ *
+ * sym
+ * +-A
+ * | +-B
+ * +-C
+ * ...
+ */
+
basedep = parent->prompt ? parent->prompt->visible.expr : NULL;
basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
basedep = expr_eliminate_dups(expr_transform(basedep));
+
+ /* Examine consecutive elements after sym */
last_menu = NULL;
for (menu = parent->next; menu; menu = menu->next) {
dep = menu->prompt ? menu->prompt->visible.expr : menu->dep;
if (!expr_contains_symbol(dep, sym))
+ /* No dependency, quit */
break;
if (expr_depends_symbol(dep, sym))
+ /* Absolute dependency, put in submenu */
goto next;
+
+ /*
+ * Also consider it a dependency on sym if our
+ * dependencies contain sym and are a "superset" of
+ * sym's dependencies, e.g. '(sym || Q) && R' when sym
+ * depends on R.
+ *
+ * Note that 'R' might be from an enclosing menu or if,
+ * making this a more common case than it might seem.
+ */
dep = expr_trans_compare(dep, E_UNEQUAL, &symbol_no);
dep = expr_eliminate_dups(expr_transform(dep));
dep2 = expr_copy(basedep);
expr_eliminate_eq(&dep, &dep2);
expr_free(dep);
if (!expr_is_yes(dep2)) {
+ /* Not superset, quit */
expr_free(dep2);
break;
}
+ /* Superset, put in submenu */
expr_free(dep2);
next:
menu_finalize(menu);
menu->parent = parent;
last_menu = menu;
}
+ expr_free(basedep);
if (last_menu) {
parent->list = parent->next;
parent->next = last_menu->next;
@@ -412,6 +529,35 @@ void menu_finalize(struct menu *parent)
*ep = expr_alloc_one(E_LIST, NULL);
(*ep)->right.sym = menu->sym;
}
+
+ /*
+ * This code serves two purposes:
+ *
+ * (1) Flattening 'if' blocks, which do not specify a submenu
+ * and only add dependencies.
+ *
+ * (Automatic submenu creation might still create a submenu
+ * from an 'if' before this code runs.)
+ *
+ * (2) "Undoing" any automatic submenus created earlier below
+ * promptless symbols.
+ *
+ * Before:
+ *
+ * A
+ * if ... (or promptless symbol)
+ * +-B
+ * +-C
+ * D
+ *
+ * After:
+ *
+ * A
+ * if ... (or promptless symbol)
+ * B
+ * C
+ * D
+ */
if (menu->list && (!menu->prompt || !menu->prompt->text)) {
for (last_menu = menu->list; ; last_menu = last_menu->next) {
last_menu->parent = parent;
@@ -436,6 +582,15 @@ void menu_finalize(struct menu *parent)
sym->flags |= SYMBOL_WARNED;
}
+ /*
+ * For non-optional choices, add a reverse dependency (corresponding to
+ * a select) of '<visibility> && m'. This prevents the user from
+ * setting the choice mode to 'n' when the choice is visible.
+ *
+ * This would also work for non-choice symbols, but only non-optional
+ * choices clear SYMBOL_OPTIONAL as of writing. Choices are implemented
+ * as a type of symbol.
+ */
if (sym && !sym_is_optional(sym) && parent->prompt) {
sym->rev_dep.expr = expr_alloc_or(sym->rev_dep.expr,
expr_alloc_and(parent->prompt->visible.expr,
@@ -477,7 +632,7 @@ bool menu_is_visible(struct menu *menu)
if (menu->visibility) {
if (expr_calc_value(menu->visibility) == no)
- return no;
+ return false;
}
sym = menu->sym;
@@ -612,13 +767,30 @@ static struct property *get_symbol_prop(struct symbol *sym)
return prop;
}
+static void get_symbol_props_str(struct gstr *r, struct symbol *sym,
+ enum prop_type tok, const char *prefix)
+{
+ bool hit = false;
+ struct property *prop;
+
+ for_all_properties(sym, prop, tok) {
+ if (!hit) {
+ str_append(r, prefix);
+ hit = true;
+ } else
+ str_printf(r, " && ");
+ expr_gstr_print(prop->expr, r);
+ }
+ if (hit)
+ str_append(r, "\n");
+}
+
/*
* head is optional and may be NULL
*/
static void get_symbol_str(struct gstr *r, struct symbol *sym,
struct list_head *head)
{
- bool hit;
struct property *prop;
if (sym && sym->name) {
@@ -648,22 +820,20 @@ static void get_symbol_str(struct gstr *r, struct symbol *sym,
}
}
- hit = false;
- for_all_properties(sym, prop, P_SELECT) {
- if (!hit) {
- str_append(r, " Selects: ");
- hit = true;
- } else
- str_printf(r, " && ");
- expr_gstr_print(prop->expr, r);
- }
- if (hit)
- str_append(r, "\n");
+ get_symbol_props_str(r, sym, P_SELECT, " Selects: ");
if (sym->rev_dep.expr) {
- str_append(r, " Selected by: ");
- expr_gstr_print(sym->rev_dep.expr, r);
- str_append(r, "\n");
+ expr_gstr_print_revdep(sym->rev_dep.expr, r, yes, " Selected by [y]:\n");
+ expr_gstr_print_revdep(sym->rev_dep.expr, r, mod, " Selected by [m]:\n");
+ expr_gstr_print_revdep(sym->rev_dep.expr, r, no, " Selected by [n]:\n");
+ }
+
+ get_symbol_props_str(r, sym, P_IMPLY, " Implies: ");
+ if (sym->implied.expr) {
+ expr_gstr_print_revdep(sym->implied.expr, r, yes, " Implied by [y]:\n");
+ expr_gstr_print_revdep(sym->implied.expr, r, mod, " Implied by [m]:\n");
+ expr_gstr_print_revdep(sym->implied.expr, r, no, " Implied by [n]:\n");
}
+
str_append(r, "\n\n");
}
@@ -1,4 +1,6 @@
#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
# merge_config.sh - Takes a list of config fragment values, and merges
# them one by one. Provides warnings on overridden values, and specified
# values that did not make it to the resulting .config file (due to missed
@@ -10,21 +12,13 @@
#
# Copyright (c) 2009-2010 Wind River Systems, Inc.
# Copyright 2011 Linaro
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the GNU General Public License for more details.
+
+set -e
clean_up() {
rm -f $TMP_FILE
- exit
+ rm -f $MERGE_FILE
}
-trap clean_up HUP INT TERM
usage() {
echo "Usage: $0 [OPTIONS] [CONFIG [...]]"
@@ -32,13 +26,18 @@ usage() {
echo " -m only merge the fragments, do not execute the make command"
echo " -n use allnoconfig instead of alldefconfig"
echo " -r list redundant entries when merging fragments"
- echo " -O dir to put generated output files"
+ echo " -y make builtin have precedence over modules"
+ echo " -O dir to put generated output files. Consider setting \$KCONFIG_CONFIG instead."
+ echo
+ echo "Used prefix: '$CONFIG_PREFIX'. You can redefine it with \$CONFIG_ environment variable."
}
RUNMAKE=true
ALLTARGET=alldefconfig
WARNREDUN=false
+BUILTIN=false
OUTPUT=.
+CONFIG_PREFIX=${CONFIG_-CONFIG_}
while true; do
case $1 in
@@ -61,6 +60,11 @@ while true; do
shift
continue
;;
+ "-y")
+ BUILTIN=true
+ shift
+ continue
+ ;;
"-O")
if [ -d $2 ];then
OUTPUT=$(echo $2 | sed 's/\/*$//')
@@ -77,11 +81,19 @@ while true; do
esac
done
-if [ "$#" -lt 2 ] ; then
+if [ "$#" -lt 1 ] ; then
usage
exit
fi
+if [ -z "$KCONFIG_CONFIG" ]; then
+ if [ "$OUTPUT" != . ]; then
+ KCONFIG_CONFIG=$(readlink -m -- "$OUTPUT/.config")
+ else
+ KCONFIG_CONFIG=.config
+ fi
+fi
+
INITFILE=$1
shift;
@@ -91,44 +103,61 @@ if [ ! -r "$INITFILE" ]; then
fi
MERGE_LIST=$*
-SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(CONFIG_[a-zA-Z0-9_]*\)[= ].*/\2/p"
+SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
+SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
+
TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX)
+MERGE_FILE=$(mktemp ./.merge_tmp.config.XXXXXXXXXX)
echo "Using $INITFILE as base"
+
+trap clean_up EXIT
+
cat $INITFILE > $TMP_FILE
# Merge files, printing warnings on overridden values
-for MERGE_FILE in $MERGE_LIST ; do
- echo "Merging $MERGE_FILE"
- if [ ! -r "$MERGE_FILE" ]; then
- echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2
+for ORIG_MERGE_FILE in $MERGE_LIST ; do
+ echo "Merging $ORIG_MERGE_FILE"
+ if [ ! -r "$ORIG_MERGE_FILE" ]; then
+ echo "The merge file '$ORIG_MERGE_FILE' does not exist. Exit." >&2
exit 1
fi
- CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE)
+ cat $ORIG_MERGE_FILE > $MERGE_FILE
+ CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
for CFG in $CFG_LIST ; do
grep -q -w $CFG $TMP_FILE || continue
PREV_VAL=$(grep -w $CFG $TMP_FILE)
NEW_VAL=$(grep -w $CFG $MERGE_FILE)
- if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
- echo Value of $CFG is redefined by fragment $MERGE_FILE:
+ BUILTIN_FLAG=false
+ if [ "$BUILTIN" = "true" ] && [ "${NEW_VAL#CONFIG_*=}" = "m" ] && [ "${PREV_VAL#CONFIG_*=}" = "y" ]; then
+ echo Previous value: $PREV_VAL
+ echo New value: $NEW_VAL
+ echo -y passed, will not demote y to m
+ echo
+ BUILTIN_FLAG=true
+ elif [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
+ echo Value of $CFG is redefined by fragment $ORIG_MERGE_FILE:
echo Previous value: $PREV_VAL
echo New value: $NEW_VAL
echo
elif [ "$WARNREDUN" = "true" ]; then
- echo Value of $CFG is redundant by fragment $MERGE_FILE:
+ echo Value of $CFG is redundant by fragment $ORIG_MERGE_FILE:
+ fi
+ if [ "$BUILTIN_FLAG" = "false" ]; then
+ sed -i "/$CFG[ =]/d" $TMP_FILE
+ else
+ sed -i "/$CFG[ =]/d" $MERGE_FILE
fi
- sed -i "/$CFG[ =]/d" $TMP_FILE
done
cat $MERGE_FILE >> $TMP_FILE
done
if [ "$RUNMAKE" = "false" ]; then
- cp $TMP_FILE $OUTPUT/.config
+ cp -T -- "$TMP_FILE" "$KCONFIG_CONFIG"
echo "#"
- echo "# merged configuration written to $OUTPUT/.config (needs make)"
+ echo "# merged configuration written to $KCONFIG_CONFIG (needs make)"
echo "#"
- clean_up
exit
fi
@@ -147,10 +176,10 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET
# Check all specified config values took (might have missed-dependency issues)
-for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
+for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
- ACTUAL_VAL=$(grep -w -e "$CFG" $OUTPUT/.config)
+ ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG" || true)
if [ "x$REQUESTED_VAL" != "x$ACTUAL_VAL" ] ; then
echo "Value requested for $CFG not in final .config"
echo "Requested value: $REQUESTED_VAL"
@@ -158,5 +187,3 @@ for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
echo ""
fi
done
-
-clean_up
new file mode 100755
@@ -0,0 +1,47 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+PKG="ncursesw menuw panelw"
+PKG2="ncurses menu panel"
+
+if [ -n "$(command -v pkg-config)" ]; then
+ if pkg-config --exists $PKG; then
+ echo cflags=\"$(pkg-config --cflags $PKG)\"
+ echo libs=\"$(pkg-config --libs $PKG)\"
+ exit 0
+ fi
+
+ if pkg-config --exists $PKG2; then
+ echo cflags=\"$(pkg-config --cflags $PKG2)\"
+ echo libs=\"$(pkg-config --libs $PKG2)\"
+ exit 0
+ fi
+fi
+
+# Check the default paths in case pkg-config is not installed.
+# (Even if it is installed, some distributions such as openSUSE cannot
+# find ncurses by pkg-config.)
+if [ -f /usr/include/ncursesw/ncurses.h ]; then
+ echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
+ echo libs=\"-lncursesw -lmenuw -lpanelw\"
+ exit 0
+fi
+
+if [ -f /usr/include/ncurses/ncurses.h ]; then
+ echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
+ echo libs=\"-lncurses -lmenu -lpanel\"
+ exit 0
+fi
+
+if [ -f /usr/include/ncurses.h ]; then
+ echo cflags=\"-D_GNU_SOURCE\"
+ echo libs=\"-lncurses -lmenu -lpanel\"
+ exit 0
+fi
+
+echo >&2 "*"
+echo >&2 "* Unable to find the ncurses package."
+echo >&2 "* Install ncurses (ncurses-devel or libncurses-dev"
+echo >&2 "* depending on your distribution)."
+echo >&2 "*"
+exit 1
@@ -1,11 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
- * Released under the terms of the GNU GPL v2.0.
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com>
*
* Derived from menuconfig.
- *
*/
+#ifndef _GNU_SOURCE
#define _GNU_SOURCE
+#endif
#include <string.h>
#include <stdlib.h>
@@ -269,7 +270,7 @@ static struct mitem k_menu_items[MAX_MENU_ITEMS];
static int items_num;
static int global_exit;
/* the currently selected button */
-const char *current_instructions = menu_instructions;
+static const char *current_instructions = menu_instructions;
static char *dialog_input_result;
static int dialog_input_result_len;
@@ -303,7 +304,7 @@ struct function_keys {
};
static const int function_keys_num = 9;
-struct function_keys function_keys[] = {
+static struct function_keys function_keys[] = {
{
.key_str = "F1",
.func = "Help",
@@ -506,7 +507,7 @@ static int get_mext_match(const char *match_str, match_f flag)
index = (index + items_num) % items_num;
while (true) {
char *str = k_menu_items[index].str;
- if (strcasestr(str, match_str) != 0)
+ if (strcasestr(str, match_str) != NULL)
return index;
if (flag == FIND_NEXT_MATCH_UP ||
flag == MATCH_TINKER_PATTERN_UP)
@@ -672,6 +673,7 @@ static int do_exit(void)
"Your configuration changes were NOT saved.",
1,
"<OK>");
+ conf_write_autoconf(0);
break;
default:
btn_dialog(
@@ -801,7 +803,7 @@ static void build_conf(struct menu *menu)
}
val = sym_get_tristate_value(sym);
- if (sym_is_changable(sym)) {
+ if (sym_is_changeable(sym)) {
switch (type) {
case S_BOOLEAN:
item_make(menu, 't', "[%c]",
@@ -855,7 +857,7 @@ static void build_conf(struct menu *menu)
} else {
switch (type) {
case S_BOOLEAN:
- if (sym_is_changable(sym))
+ if (sym_is_changeable(sym))
item_make(menu, 't', "[%c]",
val == no ? ' ' : '*');
else
@@ -874,7 +876,7 @@ static void build_conf(struct menu *menu)
ch = ' ';
break;
}
- if (sym_is_changable(sym)) {
+ if (sym_is_changeable(sym)) {
if (sym->rev_dep.tri == mod)
item_make(menu,
't', "{%c}", ch);
@@ -894,14 +896,14 @@ static void build_conf(struct menu *menu)
item_add_str("%*c%s%s", tmp, ' ',
menu_get_prompt(menu),
(sym_has_value(sym) ||
- !sym_is_changable(sym)) ? "" :
+ !sym_is_changeable(sym)) ? "" :
" (NEW)");
goto conf_childs;
}
}
item_add_str("%*c%s%s", indent + 1, ' ',
menu_get_prompt(menu),
- (sym_has_value(sym) || !sym_is_changable(sym)) ?
+ (sym_has_value(sym) || !sym_is_changeable(sym)) ?
"" : " (NEW)");
if (menu->prompt && menu->prompt->type == P_MENU) {
item_add_str(" %s", menu_is_empty(menu) ? "----" : "--->");
@@ -1046,7 +1048,7 @@ static int do_match(int key, struct match_state *state, int *ans)
state->match_direction = FIND_NEXT_MATCH_UP;
*ans = get_mext_match(state->pattern,
state->match_direction);
- } else if (key == KEY_BACKSPACE || key == 127) {
+ } else if (key == KEY_BACKSPACE || key == 8 || key == 127) {
state->pattern[strlen(state->pattern)-1] = '\0';
adj_match_dir(&state->match_direction);
} else
@@ -1065,7 +1067,7 @@ static int do_match(int key, struct match_state *state, int *ans)
static void conf(struct menu *menu)
{
- struct menu *submenu = 0;
+ struct menu *submenu = NULL;
const char *prompt = menu_get_prompt(menu);
struct symbol *sym;
int res;
@@ -1208,12 +1210,9 @@ static void conf(struct menu *menu)
}
}
-static void conf_message_callback(const char *fmt, va_list ap)
+static void conf_message_callback(const char *s)
{
- char buf[1024];
-
- vsnprintf(buf, sizeof(buf), fmt, ap);
- btn_dialog(main_window, buf, 1, "<OK>");
+ btn_dialog(main_window, s, 1, "<OK>");
}
static void show_help(struct menu *menu)
@@ -1232,7 +1231,7 @@ static void show_help(struct menu *menu)
static void conf_choice(struct menu *menu)
{
const char *prompt = menu_get_prompt(menu);
- struct menu *child = 0;
+ struct menu *child = NULL;
struct symbol *active;
int selected_index = 0;
int last_top_row = 0;
@@ -1439,8 +1438,7 @@ static void conf_save(void)
set_config_filename(dialog_input_result);
return;
}
- btn_dialog(main_window, "Can't create file! "
- "Probably a nonexistent directory.",
+ btn_dialog(main_window, "Can't create file!",
1, "<OK>");
break;
case 1:
@@ -1454,7 +1452,7 @@ static void conf_save(void)
}
}
-void setup_windows(void)
+static void setup_windows(void)
{
int lines, columns;
@@ -1,11 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
- * Released under the terms of the GNU GPL v2.0.
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com>
*
* Derived from menuconfig.
- *
*/
#include "nconf.h"
+#include "lkc.h"
/* a list of all the different widgets we use */
attributes_t attributes[ATTR_MAX+1] = {0};
@@ -129,7 +129,7 @@ static void no_colors_theme(void)
mkattrn(FUNCTION_TEXT, A_REVERSE);
}
-void set_colors()
+void set_colors(void)
{
start_color();
use_default_colors();
@@ -192,7 +192,7 @@ const char *get_line(const char *text, int line_no)
int lines = 0;
if (!text)
- return 0;
+ return NULL;
for (i = 0; text[i] != '\0' && lines < line_no; i++)
if (text[i] == '\n')
@@ -364,15 +364,17 @@ int dialog_inputbox(WINDOW *main_window,
WINDOW *prompt_win;
WINDOW *form_win;
PANEL *panel;
- int i, x, y;
+ int i, x, y, lines, columns, win_lines, win_cols;
int res = -1;
int cursor_position = strlen(init);
int cursor_form_win;
char *result = *resultp;
+ getmaxyx(stdscr, lines, columns);
+
if (strlen(init)+1 > *result_len) {
*result_len = strlen(init)+1;
- *resultp = result = realloc(result, *result_len);
+ *resultp = result = xrealloc(result, *result_len);
}
/* find the widest line of msg: */
@@ -386,14 +388,19 @@ int dialog_inputbox(WINDOW *main_window,
if (title)
prompt_width = max(prompt_width, strlen(title));
+ win_lines = min(prompt_lines+6, lines-2);
+ win_cols = min(prompt_width+7, columns-2);
+ prompt_lines = max(win_lines-6, 0);
+ prompt_width = max(win_cols-7, 0);
+
/* place dialog in middle of screen */
- y = (getmaxy(stdscr)-(prompt_lines+4))/2;
- x = (getmaxx(stdscr)-(prompt_width+4))/2;
+ y = (lines-win_lines)/2;
+ x = (columns-win_cols)/2;
strncpy(result, init, *result_len);
/* create the windows */
- win = newwin(prompt_lines+6, prompt_width+7, y, x);
+ win = newwin(win_lines, win_cols, y, x);
prompt_win = derwin(win, prompt_lines+1, prompt_width, 2, 2);
form_win = derwin(win, 1, prompt_width, prompt_lines+3, 2);
keypad(form_win, TRUE);
@@ -432,7 +439,8 @@ int dialog_inputbox(WINDOW *main_window,
case KEY_F(F_EXIT):
case KEY_F(F_BACK):
break;
- case 127:
+ case 8: /* ^H */
+ case 127: /* ^? */
case KEY_BACKSPACE:
if (cursor_position > 0) {
memmove(&result[cursor_position-1],
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
- * Released under the terms of the GNU GPL v2.0.
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com>
*
* Derived from menuconfig.
- *
*/
#include <ctype.h>
@@ -14,7 +13,7 @@
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
-#include <curses.h>
+#include <ncurses.h>
#include <menu.h>
#include <panel.h>
#include <form.h>
@@ -23,8 +22,6 @@
#include <time.h>
#include <sys/time.h>
-#include "ncurses.h"
-
#define max(a, b) ({\
typeof(a) _a = a;\
typeof(b) _b = b;\
similarity index 66%
rename from xen/tools/kconfig/zconf.y
rename to xen/tools/kconfig/parser.y
@@ -1,8 +1,8 @@
-%{
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
+%{
#include <ctype.h>
#include <stdarg.h>
@@ -20,62 +20,69 @@
int cdebug = PRINTD;
-extern int zconflex(void);
+static void yyerror(const char *err);
static void zconfprint(const char *err, ...);
static void zconf_error(const char *err, ...);
-static void zconferror(const char *err);
-static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken);
+static bool zconf_endtoken(const char *tokenname,
+ const char *expected_tokenname);
struct symbol *symbol_hash[SYMBOL_HASHSIZE];
static struct menu *current_menu, *current_entry;
%}
-%expect 30
%union
{
char *string;
- struct file *file;
struct symbol *symbol;
struct expr *expr;
struct menu *menu;
- const struct kconf_id *id;
+ enum symbol_type type;
+ enum variable_flavor flavor;
}
-%token <id>T_MAINMENU
-%token <id>T_MENU
-%token <id>T_ENDMENU
-%token <id>T_SOURCE
-%token <id>T_CHOICE
-%token <id>T_ENDCHOICE
-%token <id>T_COMMENT
-%token <id>T_CONFIG
-%token <id>T_MENUCONFIG
-%token <id>T_HELP
%token <string> T_HELPTEXT
-%token <id>T_IF
-%token <id>T_ENDIF
-%token <id>T_DEPENDS
-%token <id>T_OPTIONAL
-%token <id>T_PROMPT
-%token <id>T_TYPE
-%token <id>T_DEFAULT
-%token <id>T_SELECT
-%token <id>T_RANGE
-%token <id>T_VISIBLE
-%token <id>T_OPTION
-%token <id>T_ON
%token <string> T_WORD
%token <string> T_WORD_QUOTE
-%token T_UNEQUAL
-%token T_LESS
-%token T_LESS_EQUAL
-%token T_GREATER
-%token T_GREATER_EQUAL
+%token T_ALLNOCONFIG_Y
+%token T_BOOL
+%token T_CHOICE
%token T_CLOSE_PAREN
+%token T_COLON_EQUAL
+%token T_COMMENT
+%token T_CONFIG
+%token T_DEFAULT
+%token T_DEFCONFIG_LIST
+%token T_DEF_BOOL
+%token T_DEF_TRISTATE
+%token T_DEPENDS
+%token T_ENDCHOICE
+%token T_ENDIF
+%token T_ENDMENU
+%token T_HELP
+%token T_HEX
+%token T_IF
+%token T_IMPLY
+%token T_INT
+%token T_MAINMENU
+%token T_MENU
+%token T_MENUCONFIG
+%token T_MODULES
+%token T_ON
%token T_OPEN_PAREN
+%token T_OPTION
+%token T_OPTIONAL
+%token T_PLUS_EQUAL
+%token T_PROMPT
+%token T_RANGE
+%token T_SELECT
+%token T_SOURCE
+%token T_STRING
+%token T_TRISTATE
+%token T_VISIBLE
%token T_EOL
+%token <string> T_ASSIGN_VAL
%left T_OR
%left T_AND
@@ -84,13 +91,15 @@ static struct menu *current_menu, *current_entry;
%nonassoc T_NOT
%type <string> prompt
+%type <symbol> nonconst_symbol
%type <symbol> symbol
+%type <type> type logic_type default
%type <expr> expr
%type <expr> if_expr
-%type <id> end
-%type <id> option_name
+%type <string> end
%type <menu> if_entry menu_entry choice_entry
-%type <string> symbol_option_arg word_opt
+%type <string> word_opt assign_val
+%type <flavor> assign_op
%destructor {
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
@@ -99,71 +108,53 @@ static struct menu *current_menu, *current_entry;
menu_end_menu();
} if_entry menu_entry choice_entry
-%{
-/* Include zconf.hash.c here so it can see the token constants. */
-#include "zconf.hash.c"
-%}
-
%%
-input: nl start | start;
+input: mainmenu_stmt stmt_list | stmt_list;
-start: mainmenu_stmt stmt_list | stmt_list;
+/* mainmenu entry */
+
+mainmenu_stmt: T_MAINMENU prompt T_EOL
+{
+ menu_add_prompt(P_MENU, $2, NULL);
+};
stmt_list:
/* empty */
| stmt_list common_stmt
| stmt_list choice_stmt
| stmt_list menu_stmt
- | stmt_list end { zconf_error("unexpected end statement"); }
| stmt_list T_WORD error T_EOL { zconf_error("unknown statement \"%s\"", $2); }
- | stmt_list option_name error T_EOL
-{
- zconf_error("unexpected option \"%s\"", kconf_id_strings + $2->name);
-}
| stmt_list error T_EOL { zconf_error("invalid statement"); }
;
-option_name:
- T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE
-;
-
common_stmt:
- T_EOL
- | if_stmt
+ if_stmt
| comment_stmt
| config_stmt
| menuconfig_stmt
| source_stmt
+ | assignment_stmt
;
-option_error:
- T_WORD error T_EOL { zconf_error("unknown option \"%s\"", $1); }
- | error T_EOL { zconf_error("invalid option"); }
-;
-
-
/* config/menuconfig entry */
-config_entry_start: T_CONFIG T_WORD T_EOL
+config_entry_start: T_CONFIG nonconst_symbol T_EOL
{
- struct symbol *sym = sym_lookup($2, 0);
- sym->flags |= SYMBOL_OPTIONAL;
- menu_add_entry(sym);
- printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), $2);
+ $2->flags |= SYMBOL_OPTIONAL;
+ menu_add_entry($2);
+ printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), $2->name);
};
config_stmt: config_entry_start config_option_list
{
- menu_end_entry();
printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
};
-menuconfig_entry_start: T_MENUCONFIG T_WORD T_EOL
+menuconfig_entry_start: T_MENUCONFIG nonconst_symbol T_EOL
{
- struct symbol *sym = sym_lookup($2, 0);
- sym->flags |= SYMBOL_OPTIONAL;
- menu_add_entry(sym);
- printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), $2);
+ $2->flags |= SYMBOL_OPTIONAL;
+ menu_add_entry($2);
+ printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), $2->name);
};
menuconfig_stmt: menuconfig_entry_start config_option_list
@@ -172,26 +163,22 @@ menuconfig_stmt: menuconfig_entry_start config_option_list
current_entry->prompt->type = P_MENU;
else
zconfprint("warning: menuconfig statement without prompt");
- menu_end_entry();
printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
};
config_option_list:
/* empty */
| config_option_list config_option
- | config_option_list symbol_option
| config_option_list depends
| config_option_list help
- | config_option_list option_error
- | config_option_list T_EOL
;
-config_option: T_TYPE prompt_stmt_opt T_EOL
+config_option: type prompt_stmt_opt T_EOL
{
- menu_set_type($1->stype);
+ menu_set_type($1);
printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
zconf_curname(), zconf_lineno(),
- $1->stype);
+ $1);
};
config_option: T_PROMPT prompt if_expr T_EOL
@@ -200,56 +187,58 @@ config_option: T_PROMPT prompt if_expr T_EOL
printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
};
-config_option: T_DEFAULT expr if_expr T_EOL
+config_option: default expr if_expr T_EOL
{
menu_add_expr(P_DEFAULT, $2, $3);
- if ($1->stype != S_UNKNOWN)
- menu_set_type($1->stype);
+ if ($1 != S_UNKNOWN)
+ menu_set_type($1);
printd(DEBUG_PARSE, "%s:%d:default(%u)\n",
zconf_curname(), zconf_lineno(),
- $1->stype);
+ $1);
};
-config_option: T_SELECT T_WORD if_expr T_EOL
+config_option: T_SELECT nonconst_symbol if_expr T_EOL
{
- menu_add_symbol(P_SELECT, sym_lookup($2, 0), $3);
+ menu_add_symbol(P_SELECT, $2, $3);
printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno());
};
+config_option: T_IMPLY nonconst_symbol if_expr T_EOL
+{
+ menu_add_symbol(P_IMPLY, $2, $3);
+ printd(DEBUG_PARSE, "%s:%d:imply\n", zconf_curname(), zconf_lineno());
+};
+
config_option: T_RANGE symbol symbol if_expr T_EOL
{
menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,$2, $3), $4);
printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno());
};
-symbol_option: T_OPTION symbol_option_list T_EOL
-;
+config_option: T_OPTION T_MODULES T_EOL
+{
+ menu_add_option_modules();
+};
-symbol_option_list:
- /* empty */
- | symbol_option_list T_WORD symbol_option_arg
+config_option: T_OPTION T_DEFCONFIG_LIST T_EOL
{
- const struct kconf_id *id = kconf_id_lookup($2, strlen($2));
- if (id && id->flags & TF_OPTION)
- menu_add_option(id->token, $3);
- else
- zconfprint("warning: ignoring unknown option %s", $2);
- free($2);
+ menu_add_option_defconfig_list();
};
-symbol_option_arg:
- /* empty */ { $$ = NULL; }
- | T_EQUAL prompt { $$ = $2; }
-;
+config_option: T_OPTION T_ALLNOCONFIG_Y T_EOL
+{
+ menu_add_option_allnoconfig_y();
+};
/* choice entry */
choice: T_CHOICE word_opt T_EOL
{
struct symbol *sym = sym_lookup($2, SYMBOL_CHOICE);
- sym->flags |= SYMBOL_AUTO;
+ sym->flags |= SYMBOL_NO_WRITE;
menu_add_entry(sym);
menu_add_expr(P_CHOICE, NULL, NULL);
+ free($2);
printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno());
};
@@ -260,7 +249,7 @@ choice_entry: choice choice_option_list
choice_end: end
{
- if (zconf_endtoken($1, T_CHOICE, T_ENDCHOICE)) {
+ if (zconf_endtoken($1, "choice")) {
menu_end_menu();
printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno());
}
@@ -274,8 +263,6 @@ choice_option_list:
| choice_option_list choice_option
| choice_option_list depends
| choice_option_list help
- | choice_option_list T_EOL
- | choice_option_list option_error
;
choice_option: T_PROMPT prompt if_expr T_EOL
@@ -284,15 +271,11 @@ choice_option: T_PROMPT prompt if_expr T_EOL
printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
};
-choice_option: T_TYPE prompt_stmt_opt T_EOL
+choice_option: logic_type prompt_stmt_opt T_EOL
{
- if ($1->stype == S_BOOLEAN || $1->stype == S_TRISTATE) {
- menu_set_type($1->stype);
- printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
- zconf_curname(), zconf_lineno(),
- $1->stype);
- } else
- YYERROR;
+ menu_set_type($1);
+ printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
+ zconf_curname(), zconf_lineno(), $1);
};
choice_option: T_OPTIONAL T_EOL
@@ -301,16 +284,28 @@ choice_option: T_OPTIONAL T_EOL
printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno());
};
-choice_option: T_DEFAULT T_WORD if_expr T_EOL
+choice_option: T_DEFAULT nonconst_symbol if_expr T_EOL
{
- if ($1->stype == S_UNKNOWN) {
- menu_add_symbol(P_DEFAULT, sym_lookup($2, 0), $3);
- printd(DEBUG_PARSE, "%s:%d:default\n",
- zconf_curname(), zconf_lineno());
- } else
- YYERROR;
+ menu_add_symbol(P_DEFAULT, $2, $3);
+ printd(DEBUG_PARSE, "%s:%d:default\n",
+ zconf_curname(), zconf_lineno());
};
+type:
+ logic_type
+ | T_INT { $$ = S_INT; }
+ | T_HEX { $$ = S_HEX; }
+ | T_STRING { $$ = S_STRING; }
+
+logic_type:
+ T_BOOL { $$ = S_BOOLEAN; }
+ | T_TRISTATE { $$ = S_TRISTATE; }
+
+default:
+ T_DEFAULT { $$ = S_UNKNOWN; }
+ | T_DEF_BOOL { $$ = S_BOOLEAN; }
+ | T_DEF_TRISTATE { $$ = S_TRISTATE; }
+
choice_block:
/* empty */
| choice_block common_stmt
@@ -318,7 +313,7 @@ choice_block:
/* if entry */
-if_entry: T_IF expr nl
+if_entry: T_IF expr T_EOL
{
printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
menu_add_entry(NULL);
@@ -328,29 +323,15 @@ if_entry: T_IF expr nl
if_end: end
{
- if (zconf_endtoken($1, T_IF, T_ENDIF)) {
+ if (zconf_endtoken($1, "if")) {
menu_end_menu();
printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno());
}
};
-if_stmt: if_entry if_block if_end
+if_stmt: if_entry stmt_list if_end
;
-if_block:
- /* empty */
- | if_block common_stmt
- | if_block menu_stmt
- | if_block choice_stmt
-;
-
-/* mainmenu entry */
-
-mainmenu_stmt: T_MAINMENU prompt nl
-{
- menu_add_prompt(P_MENU, $2, NULL);
-};
-
/* menu entry */
menu: T_MENU prompt T_EOL
@@ -360,33 +341,33 @@ menu: T_MENU prompt T_EOL
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
};
-menu_entry: menu visibility_list depends_list
+menu_entry: menu menu_option_list
{
$$ = menu_add_menu();
};
menu_end: end
{
- if (zconf_endtoken($1, T_MENU, T_ENDMENU)) {
+ if (zconf_endtoken($1, "menu")) {
menu_end_menu();
printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno());
}
};
-menu_stmt: menu_entry menu_block menu_end
+menu_stmt: menu_entry stmt_list menu_end
;
-menu_block:
+menu_option_list:
/* empty */
- | menu_block common_stmt
- | menu_block menu_stmt
- | menu_block choice_stmt
+ | menu_option_list visible
+ | menu_option_list depends
;
source_stmt: T_SOURCE prompt T_EOL
{
printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), $2);
zconf_nextfile($2);
+ free($2);
};
/* comment entry */
@@ -398,10 +379,13 @@ comment: T_COMMENT prompt T_EOL
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
};
-comment_stmt: comment depends_list
-{
- menu_end_entry();
-};
+comment_stmt: comment comment_option_list
+;
+
+comment_option_list:
+ /* empty */
+ | comment_option_list depends
+;
/* help option */
@@ -413,18 +397,22 @@ help_start: T_HELP T_EOL
help: help_start T_HELPTEXT
{
+ if (current_entry->help) {
+ free(current_entry->help);
+ zconfprint("warning: '%s' defined with more than one help text -- only the last one will be used",
+ current_entry->sym->name ?: "<choice>");
+ }
+
+ /* Is the help text empty or all whitespace? */
+ if ($2[strspn($2, " \f\n\r\t\v")] == '\0')
+ zconfprint("warning: '%s' defined with blank help text",
+ current_entry->sym->name ?: "<choice>");
+
current_entry->help = $2;
};
/* depends option */
-depends_list:
- /* empty */
- | depends_list depends
- | depends_list T_EOL
- | depends_list option_error
-;
-
depends: T_DEPENDS T_ON expr T_EOL
{
menu_add_dep($3);
@@ -432,14 +420,7 @@ depends: T_DEPENDS T_ON expr T_EOL
};
/* visibility option */
-
-visibility_list:
- /* empty */
- | visibility_list visible
- | visibility_list T_EOL
-;
-
-visible: T_VISIBLE if_expr
+visible: T_VISIBLE if_expr T_EOL
{
menu_add_visibility($2);
};
@@ -457,14 +438,9 @@ prompt: T_WORD
| T_WORD_QUOTE
;
-end: T_ENDMENU T_EOL { $$ = $1; }
- | T_ENDCHOICE T_EOL { $$ = $1; }
- | T_ENDIF T_EOL { $$ = $1; }
-;
-
-nl:
- T_EOL
- | nl T_EOL
+end: T_ENDMENU T_EOL { $$ = "menu"; }
+ | T_ENDCHOICE T_EOL { $$ = "choice"; }
+ | T_ENDIF T_EOL { $$ = "if"; }
;
if_expr: /* empty */ { $$ = NULL; }
@@ -484,13 +460,31 @@ expr: symbol { $$ = expr_alloc_symbol($1); }
| expr T_AND expr { $$ = expr_alloc_two(E_AND, $1, $3); }
;
-symbol: T_WORD { $$ = sym_lookup($1, 0); free($1); }
+/* For symbol definitions, selects, etc., where quotes are not accepted */
+nonconst_symbol: T_WORD { $$ = sym_lookup($1, 0); free($1); };
+
+symbol: nonconst_symbol
| T_WORD_QUOTE { $$ = sym_lookup($1, SYMBOL_CONST); free($1); }
;
word_opt: /* empty */ { $$ = NULL; }
| T_WORD
+/* assignment statement */
+
+assignment_stmt: T_WORD assign_op assign_val T_EOL { variable_add($1, $3, $2); free($1); free($3); }
+
+assign_op:
+ T_EQUAL { $$ = VAR_RECURSIVE; }
+ | T_COLON_EQUAL { $$ = VAR_SIMPLE; }
+ | T_PLUS_EQUAL { $$ = VAR_APPEND; }
+;
+
+assign_val:
+ /* empty */ { $$ = xstrdup(""); };
+ | T_ASSIGN_VAL
+;
+
%%
void conf_parse(const char *name)
@@ -500,61 +494,51 @@ void conf_parse(const char *name)
zconf_initscan(name);
- sym_init();
_menu_init();
- rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
if (getenv("ZCONF_DEBUG"))
- zconfdebug = 1;
- zconfparse();
- if (zconfnerrs)
+ yydebug = 1;
+ yyparse();
+
+ /* Variables are expanded in the parse phase. We can free them here. */
+ variable_all_del();
+
+ if (yynerrs)
exit(1);
if (!modules_sym)
modules_sym = sym_find( "n" );
- rootmenu.prompt->text = rootmenu.prompt->text;
- rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text);
+ if (!menu_has_prompt(&rootmenu)) {
+ current_entry = &rootmenu;
+ menu_add_prompt(P_MENU, "Main menu", NULL);
+ }
menu_finalize(&rootmenu);
for_all_symbols(i, sym) {
if (sym_check_deps(sym))
- zconfnerrs++;
+ yynerrs++;
}
- if (zconfnerrs)
+ if (yynerrs)
exit(1);
sym_set_change_count(1);
}
-static const char *zconf_tokenname(int token)
-{
- switch (token) {
- case T_MENU: return "menu";
- case T_ENDMENU: return "endmenu";
- case T_CHOICE: return "choice";
- case T_ENDCHOICE: return "endchoice";
- case T_IF: return "if";
- case T_ENDIF: return "endif";
- case T_DEPENDS: return "depends";
- case T_VISIBLE: return "visible";
- }
- return "<token>";
-}
-
-static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken)
+static bool zconf_endtoken(const char *tokenname,
+ const char *expected_tokenname)
{
- if (id->token != endtoken) {
+ if (strcmp(tokenname, expected_tokenname)) {
zconf_error("unexpected '%s' within %s block",
- kconf_id_strings + id->name, zconf_tokenname(starttoken));
- zconfnerrs++;
+ tokenname, expected_tokenname);
+ yynerrs++;
return false;
}
if (current_menu->file != current_file) {
zconf_error("'%s' in different file than '%s'",
- kconf_id_strings + id->name, zconf_tokenname(starttoken));
+ tokenname, expected_tokenname);
fprintf(stderr, "%s:%d: location of the '%s'\n",
current_menu->file->name, current_menu->lineno,
- zconf_tokenname(starttoken));
- zconfnerrs++;
+ expected_tokenname);
+ yynerrs++;
return false;
}
return true;
@@ -575,7 +559,7 @@ static void zconf_error(const char *err, ...)
{
va_list ap;
- zconfnerrs++;
+ yynerrs++;
fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
va_start(ap, err);
vfprintf(stderr, err, ap);
@@ -583,7 +567,7 @@ static void zconf_error(const char *err, ...)
fprintf(stderr, "\n");
}
-static void zconferror(const char *err)
+static void yyerror(const char *err)
{
fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err);
}
@@ -616,7 +600,7 @@ static void print_symbol(FILE *out, struct menu *menu)
fprintf(out, "\nconfig %s\n", sym->name);
switch (sym->type) {
case S_BOOLEAN:
- fputs(" boolean\n", out);
+ fputs(" bool\n", out);
break;
case S_TRISTATE:
fputs(" tristate\n", out);
@@ -664,6 +648,11 @@ static void print_symbol(FILE *out, struct menu *menu)
expr_fprint(prop->expr, out);
fputc('\n', out);
break;
+ case P_IMPLY:
+ fputs( " imply ", out);
+ expr_fprint(prop->expr, out);
+ fputc('\n', out);
+ break;
case P_RANGE:
fputs( " range ", out);
expr_fprint(prop->expr, out);
@@ -674,6 +663,10 @@ static void print_symbol(FILE *out, struct menu *menu)
print_quoted_string(out, prop->text);
fputc('\n', out);
break;
+ case P_SYMBOL:
+ fputs( " symbol ", out);
+ fprintf(out, "%s\n", prop->sym->name);
+ break;
default:
fprintf(out, " unknown prop %d!\n", prop->type);
break;
@@ -734,9 +727,5 @@ void zconfdump(FILE *out)
}
}
-#include "zconf.lex.c"
#include "util.c"
-#include "confdata.c"
-#include "expr.c"
-#include "symbol.c"
#include "menu.c"
new file mode 100644
@@ -0,0 +1,574 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <ctype.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "list.h"
+#include "lkc.h"
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+
+static char *expand_string_with_args(const char *in, int argc, char *argv[]);
+static char *expand_string(const char *in);
+
+static void __attribute__((noreturn)) pperror(const char *format, ...)
+{
+ va_list ap;
+
+ fprintf(stderr, "%s:%d: ", current_file->name, yylineno);
+ va_start(ap, format);
+ vfprintf(stderr, format, ap);
+ va_end(ap);
+ fprintf(stderr, "\n");
+
+ exit(1);
+}
+
+/*
+ * Environment variables
+ */
+static LIST_HEAD(env_list);
+
+struct env {
+ char *name;
+ char *value;
+ struct list_head node;
+};
+
+static void env_add(const char *name, const char *value)
+{
+ struct env *e;
+
+ e = xmalloc(sizeof(*e));
+ e->name = xstrdup(name);
+ e->value = xstrdup(value);
+
+ list_add_tail(&e->node, &env_list);
+}
+
+static void env_del(struct env *e)
+{
+ list_del(&e->node);
+ free(e->name);
+ free(e->value);
+ free(e);
+}
+
+/* The returned pointer must be freed when done */
+static char *env_expand(const char *name)
+{
+ struct env *e;
+ const char *value;
+
+ if (!*name)
+ return NULL;
+
+ list_for_each_entry(e, &env_list, node) {
+ if (!strcmp(name, e->name))
+ return xstrdup(e->value);
+ }
+
+ value = getenv(name);
+ if (!value)
+ return NULL;
+
+ /*
+ * We need to remember all referenced environment variables.
+ * They will be written out to include/config/auto.conf.cmd
+ */
+ env_add(name, value);
+
+ return xstrdup(value);
+}
+
+void env_write_dep(FILE *f, const char *autoconfig_name)
+{
+ struct env *e, *tmp;
+
+ list_for_each_entry_safe(e, tmp, &env_list, node) {
+ fprintf(f, "ifneq \"$(%s)\" \"%s\"\n", e->name, e->value);
+ fprintf(f, "%s: FORCE\n", autoconfig_name);
+ fprintf(f, "endif\n");
+ env_del(e);
+ }
+}
+
+/*
+ * Built-in functions
+ */
+struct function {
+ const char *name;
+ unsigned int min_args;
+ unsigned int max_args;
+ char *(*func)(int argc, char *argv[]);
+};
+
+static char *do_error_if(int argc, char *argv[])
+{
+ if (!strcmp(argv[0], "y"))
+ pperror("%s", argv[1]);
+
+ return NULL;
+}
+
+static char *do_filename(int argc, char *argv[])
+{
+ return xstrdup(current_file->name);
+}
+
+static char *do_info(int argc, char *argv[])
+{
+ printf("%s\n", argv[0]);
+
+ return xstrdup("");
+}
+
+static char *do_lineno(int argc, char *argv[])
+{
+ char buf[16];
+
+ sprintf(buf, "%d", yylineno);
+
+ return xstrdup(buf);
+}
+
+static char *do_shell(int argc, char *argv[])
+{
+ FILE *p;
+ char buf[256];
+ char *cmd;
+ size_t nread;
+ int i;
+
+ cmd = argv[0];
+
+ p = popen(cmd, "r");
+ if (!p) {
+ perror(cmd);
+ exit(1);
+ }
+
+ nread = fread(buf, 1, sizeof(buf), p);
+ if (nread == sizeof(buf))
+ nread--;
+
+ /* remove trailing new lines */
+ while (nread > 0 && buf[nread - 1] == '\n')
+ nread--;
+
+ buf[nread] = 0;
+
+ /* replace a new line with a space */
+ for (i = 0; i < nread; i++) {
+ if (buf[i] == '\n')
+ buf[i] = ' ';
+ }
+
+ if (pclose(p) == -1) {
+ perror(cmd);
+ exit(1);
+ }
+
+ return xstrdup(buf);
+}
+
+static char *do_warning_if(int argc, char *argv[])
+{
+ if (!strcmp(argv[0], "y"))
+ fprintf(stderr, "%s:%d: %s\n",
+ current_file->name, yylineno, argv[1]);
+
+ return xstrdup("");
+}
+
+static const struct function function_table[] = {
+ /* Name MIN MAX Function */
+ { "error-if", 2, 2, do_error_if },
+ { "filename", 0, 0, do_filename },
+ { "info", 1, 1, do_info },
+ { "lineno", 0, 0, do_lineno },
+ { "shell", 1, 1, do_shell },
+ { "warning-if", 2, 2, do_warning_if },
+};
+
+#define FUNCTION_MAX_ARGS 16
+
+static char *function_expand(const char *name, int argc, char *argv[])
+{
+ const struct function *f;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(function_table); i++) {
+ f = &function_table[i];
+ if (strcmp(f->name, name))
+ continue;
+
+ if (argc < f->min_args)
+ pperror("too few function arguments passed to '%s'",
+ name);
+
+ if (argc > f->max_args)
+ pperror("too many function arguments passed to '%s'",
+ name);
+
+ return f->func(argc, argv);
+ }
+
+ return NULL;
+}
+
+/*
+ * Variables (and user-defined functions)
+ */
+static LIST_HEAD(variable_list);
+
+struct variable {
+ char *name;
+ char *value;
+ enum variable_flavor flavor;
+ int exp_count;
+ struct list_head node;
+};
+
+static struct variable *variable_lookup(const char *name)
+{
+ struct variable *v;
+
+ list_for_each_entry(v, &variable_list, node) {
+ if (!strcmp(name, v->name))
+ return v;
+ }
+
+ return NULL;
+}
+
+static char *variable_expand(const char *name, int argc, char *argv[])
+{
+ struct variable *v;
+ char *res;
+
+ v = variable_lookup(name);
+ if (!v)
+ return NULL;
+
+ if (argc == 0 && v->exp_count)
+ pperror("Recursive variable '%s' references itself (eventually)",
+ name);
+
+ if (v->exp_count > 1000)
+ pperror("Too deep recursive expansion");
+
+ v->exp_count++;
+
+ if (v->flavor == VAR_RECURSIVE)
+ res = expand_string_with_args(v->value, argc, argv);
+ else
+ res = xstrdup(v->value);
+
+ v->exp_count--;
+
+ return res;
+}
+
+void variable_add(const char *name, const char *value,
+ enum variable_flavor flavor)
+{
+ struct variable *v;
+ char *new_value;
+ bool append = false;
+
+ v = variable_lookup(name);
+ if (v) {
+ /* For defined variables, += inherits the existing flavor */
+ if (flavor == VAR_APPEND) {
+ flavor = v->flavor;
+ append = true;
+ } else {
+ free(v->value);
+ }
+ } else {
+ /* For undefined variables, += assumes the recursive flavor */
+ if (flavor == VAR_APPEND)
+ flavor = VAR_RECURSIVE;
+
+ v = xmalloc(sizeof(*v));
+ v->name = xstrdup(name);
+ v->exp_count = 0;
+ list_add_tail(&v->node, &variable_list);
+ }
+
+ v->flavor = flavor;
+
+ if (flavor == VAR_SIMPLE)
+ new_value = expand_string(value);
+ else
+ new_value = xstrdup(value);
+
+ if (append) {
+ v->value = xrealloc(v->value,
+ strlen(v->value) + strlen(new_value) + 2);
+ strcat(v->value, " ");
+ strcat(v->value, new_value);
+ free(new_value);
+ } else {
+ v->value = new_value;
+ }
+}
+
+static void variable_del(struct variable *v)
+{
+ list_del(&v->node);
+ free(v->name);
+ free(v->value);
+ free(v);
+}
+
+void variable_all_del(void)
+{
+ struct variable *v, *tmp;
+
+ list_for_each_entry_safe(v, tmp, &variable_list, node)
+ variable_del(v);
+}
+
+/*
+ * Evaluate a clause with arguments. argc/argv are arguments from the upper
+ * function call.
+ *
+ * Returned string must be freed when done
+ */
+static char *eval_clause(const char *str, size_t len, int argc, char *argv[])
+{
+ char *tmp, *name, *res, *endptr, *prev, *p;
+ int new_argc = 0;
+ char *new_argv[FUNCTION_MAX_ARGS];
+ int nest = 0;
+ int i;
+ unsigned long n;
+
+ tmp = xstrndup(str, len);
+
+ /*
+ * If variable name is '1', '2', etc. It is generally an argument
+ * from a user-function call (i.e. local-scope variable). If not
+ * available, then look-up global-scope variables.
+ */
+ n = strtoul(tmp, &endptr, 10);
+ if (!*endptr && n > 0 && n <= argc) {
+ res = xstrdup(argv[n - 1]);
+ goto free_tmp;
+ }
+
+ prev = p = tmp;
+
+ /*
+ * Split into tokens
+ * The function name and arguments are separated by a comma.
+ * For example, if the function call is like this:
+ * $(foo,$(x),$(y))
+ *
+ * The input string for this helper should be:
+ * foo,$(x),$(y)
+ *
+ * and split into:
+ * new_argv[0] = 'foo'
+ * new_argv[1] = '$(x)'
+ * new_argv[2] = '$(y)'
+ */
+ while (*p) {
+ if (nest == 0 && *p == ',') {
+ *p = 0;
+ if (new_argc >= FUNCTION_MAX_ARGS)
+ pperror("too many function arguments");
+ new_argv[new_argc++] = prev;
+ prev = p + 1;
+ } else if (*p == '(') {
+ nest++;
+ } else if (*p == ')') {
+ nest--;
+ }
+
+ p++;
+ }
+ new_argv[new_argc++] = prev;
+
+ /*
+ * Shift arguments
+ * new_argv[0] represents a function name or a variable name. Put it
+ * into 'name', then shift the rest of the arguments. This simplifies
+ * 'const' handling.
+ */
+ name = expand_string_with_args(new_argv[0], argc, argv);
+ new_argc--;
+ for (i = 0; i < new_argc; i++)
+ new_argv[i] = expand_string_with_args(new_argv[i + 1],
+ argc, argv);
+
+ /* Search for variables */
+ res = variable_expand(name, new_argc, new_argv);
+ if (res)
+ goto free;
+
+ /* Look for built-in functions */
+ res = function_expand(name, new_argc, new_argv);
+ if (res)
+ goto free;
+
+ /* Last, try environment variable */
+ if (new_argc == 0) {
+ res = env_expand(name);
+ if (res)
+ goto free;
+ }
+
+ res = xstrdup("");
+free:
+ for (i = 0; i < new_argc; i++)
+ free(new_argv[i]);
+ free(name);
+free_tmp:
+ free(tmp);
+
+ return res;
+}
+
+/*
+ * Expand a string that follows '$'
+ *
+ * For example, if the input string is
+ * ($(FOO)$($(BAR)))$(BAZ)
+ * this helper evaluates
+ * $($(FOO)$($(BAR)))
+ * and returns a new string containing the expansion (note that the string is
+ * recursively expanded), also advancing 'str' to point to the next character
+ * after the corresponding closing parenthesis, in this case, *str will be
+ * $(BAR)
+ */
+static char *expand_dollar_with_args(const char **str, int argc, char *argv[])
+{
+ const char *p = *str;
+ const char *q;
+ int nest = 0;
+
+ /*
+ * In Kconfig, variable/function references always start with "$(".
+ * Neither single-letter variables as in $A nor curly braces as in ${CC}
+ * are supported. '$' not followed by '(' loses its special meaning.
+ */
+ if (*p != '(') {
+ *str = p;
+ return xstrdup("$");
+ }
+
+ p++;
+ q = p;
+ while (*q) {
+ if (*q == '(') {
+ nest++;
+ } else if (*q == ')') {
+ if (nest-- == 0)
+ break;
+ }
+ q++;
+ }
+
+ if (!*q)
+ pperror("unterminated reference to '%s': missing ')'", p);
+
+ /* Advance 'str' to after the expanded initial portion of the string */
+ *str = q + 1;
+
+ return eval_clause(p, q - p, argc, argv);
+}
+
+char *expand_dollar(const char **str)
+{
+ return expand_dollar_with_args(str, 0, NULL);
+}
+
+static char *__expand_string(const char **str, bool (*is_end)(char c),
+ int argc, char *argv[])
+{
+ const char *in, *p;
+ char *expansion, *out;
+ size_t in_len, out_len;
+
+ out = xmalloc(1);
+ *out = 0;
+ out_len = 1;
+
+ p = in = *str;
+
+ while (1) {
+ if (*p == '$') {
+ in_len = p - in;
+ p++;
+ expansion = expand_dollar_with_args(&p, argc, argv);
+ out_len += in_len + strlen(expansion);
+ out = xrealloc(out, out_len);
+ strncat(out, in, in_len);
+ strcat(out, expansion);
+ free(expansion);
+ in = p;
+ continue;
+ }
+
+ if (is_end(*p))
+ break;
+
+ p++;
+ }
+
+ in_len = p - in;
+ out_len += in_len;
+ out = xrealloc(out, out_len);
+ strncat(out, in, in_len);
+
+ /* Advance 'str' to the end character */
+ *str = p;
+
+ return out;
+}
+
+static bool is_end_of_str(char c)
+{
+ return !c;
+}
+
+/*
+ * Expand variables and functions in the given string. Undefined variables
+ * expand to an empty string.
+ * The returned string must be freed when done.
+ */
+static char *expand_string_with_args(const char *in, int argc, char *argv[])
+{
+ return __expand_string(&in, is_end_of_str, argc, argv);
+}
+
+static char *expand_string(const char *in)
+{
+ return expand_string_with_args(in, 0, NULL);
+}
+
+static bool is_end_of_token(char c)
+{
+ return !(isalnum(c) || c == '_' || c == '-');
+}
+
+/*
+ * Expand variables in a token. The parsing stops when a token separater
+ * (in most cases, it is a whitespace) is encountered. 'str' is updated to
+ * point to the next character.
+ *
+ * The returned string must be freed when done.
+ */
+char *expand_one_token(const char **str)
+{
+ return __expand_string(str, is_end_of_token, 0, NULL);
+}
new file mode 100755
@@ -0,0 +1,32 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+PKG="Qt5Core Qt5Gui Qt5Widgets"
+PKG2="QtCore QtGui"
+
+if [ -z "$(command -v pkg-config)" ]; then
+ echo >&2 "*"
+ echo >&2 "* 'make xconfig' requires 'pkg-config'. Please install it."
+ echo >&2 "*"
+ exit 1
+fi
+
+if pkg-config --exists $PKG; then
+ echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets)\"
+ echo libs=\"$(pkg-config --libs $PKG)\"
+ echo moc=\"$(pkg-config --variable=host_bins Qt5Core)/moc\"
+ exit 0
+fi
+
+if pkg-config --exists $PKG2; then
+ echo cflags=\"$(pkg-config --cflags $PKG2)\"
+ echo libs=\"$(pkg-config --libs $PKG2)\"
+ echo moc=\"$(pkg-config --variable=moc_location QtCore)\"
+ exit 0
+fi
+
+echo >&2 "*"
+echo >&2 "* Could not find Qt via pkg-config."
+echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH"
+echo >&2 "*"
+exit 1
@@ -1,32 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
+ * Copyright (C) 2015 Boris Barbulovski <bbarbulovski@gmail.com>
*/
#include <qglobal.h>
-#if QT_VERSION < 0x040000
-#include <stddef.h>
-#include <qmainwindow.h>
-#include <qvbox.h>
-#include <qvaluelist.h>
+#include <QMainWindow>
+#include <QList>
#include <qtextbrowser.h>
-#include <qaction.h>
-#include <qheader.h>
-#include <qfiledialog.h>
-#include <qdragobject.h>
-#include <qpopupmenu.h>
-#else
-#include <q3mainwindow.h>
-#include <q3vbox.h>
-#include <q3valuelist.h>
-#include <q3textbrowser.h>
-#include <q3action.h>
-#include <q3header.h>
-#include <q3filedialog.h>
-#include <q3dragobject.h>
-#include <q3popupmenu.h>
-#endif
+#include <QAction>
+#include <QFileDialog>
+#include <QMenu>
#include <qapplication.h>
#include <qdesktopwidget.h>
@@ -47,13 +32,13 @@
#include "qconf.h"
#include "qconf.moc"
-#include "images.c"
+#include "images.h"
static QApplication *configApp;
static ConfigSettings *configSettings;
-Q3Action *ConfigMainWindow::saveAction;
+QAction *ConfigMainWindow::saveAction;
static inline QString qgettext(const char* str)
{
@@ -68,14 +53,22 @@ ConfigSettings::ConfigSettings()
/**
* Reads a list of integer values from the application settings.
*/
-Q3ValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
+QList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
{
- Q3ValueList<int> result;
- QStringList entryList = readListEntry(key, ok);
- QStringList::Iterator it;
+ QList<int> result;
- for (it = entryList.begin(); it != entryList.end(); ++it)
- result.push_back((*it).toInt());
+ if (contains(key))
+ {
+ QStringList entryList = value(key).toStringList();
+ QStringList::Iterator it;
+
+ for (it = entryList.begin(); it != entryList.end(); ++it)
+ result.push_back((*it).toInt());
+
+ *ok = true;
+ }
+ else
+ *ok = false;
return result;
}
@@ -83,14 +76,16 @@ Q3ValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
/**
* Writes a list of integer values to the application settings.
*/
-bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList<int>& value)
+bool ConfigSettings::writeSizes(const QString& key, const QList<int>& value)
{
QStringList stringList;
- Q3ValueList<int>::ConstIterator it;
+ QList<int>::ConstIterator it;
for (it = value.begin(); it != value.end(); ++it)
stringList.push_back(QString::number(*it));
- return writeEntry(key, stringList);
+ setValue(key, stringList);
+
+ return true;
}
@@ -100,9 +95,6 @@ bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList<int>& valu
*/
void ConfigItem::okRename(int col)
{
- Parent::okRename(col);
- sym_set_string_value(menu->sym, text(dataColIdx).latin1());
- listView()->updateList(this);
}
/*
@@ -140,11 +132,11 @@ void ConfigItem::updateMenu(void)
} else {
if (sym)
break;
- setPixmap(promptColIdx, 0);
+ setPixmap(promptColIdx, QIcon());
}
goto set_prompt;
case P_COMMENT:
- setPixmap(promptColIdx, 0);
+ setPixmap(promptColIdx, QIcon());
goto set_prompt;
default:
;
@@ -160,8 +152,8 @@ void ConfigItem::updateMenu(void)
case S_TRISTATE:
char ch;
- if (!sym_is_changable(sym) && list->optMode == normalOpt) {
- setPixmap(promptColIdx, 0);
+ if (!sym_is_changeable(sym) && list->optMode == normalOpt) {
+ setPixmap(promptColIdx, QIcon());
setText(noColIdx, QString::null);
setText(modColIdx, QString::null);
setText(yesColIdx, QString::null);
@@ -207,9 +199,6 @@ void ConfigItem::updateMenu(void)
data = sym_get_string_value(sym);
- int i = list->mapIdx(dataColIdx);
- if (i >= 0)
- setRenameEnabled(i, TRUE);
setText(dataColIdx, data);
if (type == S_STRING)
prompt = QString("%1: %2").arg(prompt).arg(data);
@@ -241,18 +230,6 @@ void ConfigItem::testUpdateMenu(bool v)
updateMenu();
}
-void ConfigItem::paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align)
-{
- ConfigList* list = listView();
-
- if (visible) {
- if (isSelected() && !list->hasFocus() && list->mode == menuMode)
- Parent::paintCell(p, list->inactivedColorGroup, column, width, align);
- else
- Parent::paintCell(p, cg, column, width, align);
- } else
- Parent::paintCell(p, list->disabledColorGroup, column, width, align);
-}
/*
* construct a menu entry
@@ -265,7 +242,7 @@ void ConfigItem::init(void)
menu->data = this;
if (list->mode != fullMode)
- setOpen(TRUE);
+ setExpanded(true);
sym_calc_value(menu->sym);
}
updateMenu();
@@ -290,7 +267,7 @@ ConfigItem::~ConfigItem(void)
ConfigLineEdit::ConfigLineEdit(ConfigView* parent)
: Parent(parent)
{
- connect(this, SIGNAL(lostFocus()), SLOT(hide()));
+ connect(this, SIGNAL(editingFinished()), SLOT(hide()));
}
void ConfigLineEdit::show(ConfigItem* i)
@@ -311,7 +288,7 @@ void ConfigLineEdit::keyPressEvent(QKeyEvent* e)
break;
case Qt::Key_Return:
case Qt::Key_Enter:
- sym_set_string_value(item->menu->sym, text().latin1());
+ sym_set_string_value(item->menu->sym, text().toLatin1());
parent()->updateList(item);
break;
default:
@@ -324,39 +301,39 @@ void ConfigLineEdit::keyPressEvent(QKeyEvent* e)
}
ConfigList::ConfigList(ConfigView* p, const char *name)
- : Parent(p, name),
+ : Parent(p),
updateAll(false),
symbolYesPix(xpm_symbol_yes), symbolModPix(xpm_symbol_mod), symbolNoPix(xpm_symbol_no),
choiceYesPix(xpm_choice_yes), choiceNoPix(xpm_choice_no),
menuPix(xpm_menu), menuInvPix(xpm_menu_inv), menuBackPix(xpm_menuback), voidPix(xpm_void),
- showName(false), showRange(false), showData(false), optMode(normalOpt),
+ showName(false), showRange(false), showData(false), mode(singleMode), optMode(normalOpt),
rootEntry(0), headerPopup(0)
{
int i;
- setSorting(-1);
- setRootIsDecorated(TRUE);
- disabledColorGroup = palette().active();
- disabledColorGroup.setColor(QColorGroup::Text, palette().disabled().text());
- inactivedColorGroup = palette().active();
- inactivedColorGroup.setColor(QColorGroup::Highlight, palette().disabled().highlight());
+ setObjectName(name);
+ setSortingEnabled(false);
+ setRootIsDecorated(true);
+
+ setVerticalScrollMode(ScrollPerPixel);
+ setHorizontalScrollMode(ScrollPerPixel);
- connect(this, SIGNAL(selectionChanged(void)),
+ setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
+
+ connect(this, SIGNAL(itemSelectionChanged(void)),
SLOT(updateSelection(void)));
if (name) {
configSettings->beginGroup(name);
- showName = configSettings->readBoolEntry("/showName", false);
- showRange = configSettings->readBoolEntry("/showRange", false);
- showData = configSettings->readBoolEntry("/showData", false);
- optMode = (enum optionMode)configSettings->readNumEntry("/optionMode", false);
+ showName = configSettings->value("/showName", false).toBool();
+ showRange = configSettings->value("/showRange", false).toBool();
+ showData = configSettings->value("/showData", false).toBool();
+ optMode = (enum optionMode)configSettings->value("/optionMode", 0).toInt();
configSettings->endGroup();
connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
}
- for (i = 0; i < colNr; i++)
- colMap[i] = colRevMap[i] = -1;
- addColumn(promptColIdx, "Option");
+ addColumn(promptColIdx);
reinit();
}
@@ -381,26 +358,26 @@ void ConfigList::reinit(void)
removeColumn(nameColIdx);
if (showName)
- addColumn(nameColIdx, "Name");
+ addColumn(nameColIdx);
if (showRange) {
- addColumn(noColIdx, "N");
- addColumn(modColIdx, "M");
- addColumn(yesColIdx, "Y");
+ addColumn(noColIdx);
+ addColumn(modColIdx);
+ addColumn(yesColIdx);
}
if (showData)
- addColumn(dataColIdx, "Value");
+ addColumn(dataColIdx);
updateListAll();
}
void ConfigList::saveSettings(void)
{
- if (name()) {
- configSettings->beginGroup(name());
- configSettings->writeEntry("/showName", showName);
- configSettings->writeEntry("/showRange", showRange);
- configSettings->writeEntry("/showData", showData);
- configSettings->writeEntry("/optionMode", (int)optMode);
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ configSettings->setValue("/showName", showName);
+ configSettings->setValue("/showRange", showRange);
+ configSettings->setValue("/showData", showData);
+ configSettings->setValue("/optionMode", (int)optMode);
configSettings->endGroup();
}
}
@@ -422,7 +399,10 @@ void ConfigList::updateSelection(void)
struct menu *menu;
enum prop_type type;
- ConfigItem* item = (ConfigItem*)selectedItem();
+ if (selectedItems().count() == 0)
+ return;
+
+ ConfigItem* item = (ConfigItem*)selectedItems().first();
if (!item)
return;
@@ -442,21 +422,23 @@ void ConfigList::updateList(ConfigItem* item)
if (!rootEntry) {
if (mode != listMode)
goto update;
- Q3ListViewItemIterator it(this);
+ QTreeWidgetItemIterator it(this);
ConfigItem* item;
- for (; it.current(); ++it) {
- item = (ConfigItem*)it.current();
+ while (*it) {
+ item = (ConfigItem*)(*it);
if (!item->menu)
continue;
item->testUpdateMenu(menu_is_visible(item->menu));
+
+ ++it;
}
return;
}
if (rootEntry != &rootmenu && (mode == singleMode ||
(mode == symbolMode && rootEntry->parent != &rootmenu))) {
- item = firstChild();
+ item = (ConfigItem *)topLevelItem(0);
if (!item)
item = new ConfigItem(this, 0, true);
last = item;
@@ -470,12 +452,14 @@ void ConfigList::updateList(ConfigItem* item)
item->testUpdateMenu(true);
updateMenuList(item, rootEntry);
- triggerUpdate();
+ update();
+ resizeColumnToContents(0);
return;
}
update:
updateMenuList(this, rootEntry);
- triggerUpdate();
+ update();
+ resizeColumnToContents(0);
}
void ConfigList::setValue(ConfigItem* item, tristate val)
@@ -497,7 +481,7 @@ void ConfigList::setValue(ConfigItem* item, tristate val)
if (!sym_set_tristate_value(sym, val))
return;
if (oldval == no && item->menu->list)
- item->setOpen(TRUE);
+ item->setExpanded(true);
parent()->updateList(item);
break;
}
@@ -515,7 +499,7 @@ void ConfigList::changeValue(ConfigItem* item)
sym = menu->sym;
if (!sym) {
if (item->menu->list)
- item->setOpen(!item->isOpen());
+ item->setExpanded(!item->isExpanded());
return;
}
@@ -527,9 +511,9 @@ void ConfigList::changeValue(ConfigItem* item)
newexpr = sym_toggle_tristate_value(sym);
if (item->menu->list) {
if (oldexpr == newexpr)
- item->setOpen(!item->isOpen());
+ item->setExpanded(!item->isExpanded());
else if (oldexpr == no)
- item->setOpen(TRUE);
+ item->setExpanded(true);
}
if (oldexpr != newexpr)
parent()->updateList(item);
@@ -537,10 +521,7 @@ void ConfigList::changeValue(ConfigItem* item)
case S_INT:
case S_HEX:
case S_STRING:
- if (colMap[dataColIdx] >= 0)
- item->startRename(colMap[dataColIdx]);
- else
- parent()->lineEdit->show(item);
+ parent()->lineEdit->show(item);
break;
}
}
@@ -557,8 +538,10 @@ void ConfigList::setRootMenu(struct menu *menu)
updateMenuList(this, 0);
rootEntry = menu;
updateListAll();
- setSelected(currentItem(), hasFocus());
- ensureItemVisible(currentItem());
+ if (currentItem()) {
+ currentItem()->setSelected(hasFocus());
+ scrollToItem(currentItem());
+ }
}
void ConfigList::setParentMenu(void)
@@ -571,13 +554,16 @@ void ConfigList::setParentMenu(void)
return;
setRootMenu(menu_get_parent_menu(rootEntry->parent));
- Q3ListViewItemIterator it(this);
- for (; (item = (ConfigItem*)it.current()); it++) {
+ QTreeWidgetItemIterator it(this);
+ while (*it) {
+ item = (ConfigItem *)(*it);
if (item->menu == oldroot) {
setCurrentItem(item);
- ensureItemVisible(item);
+ scrollToItem(item);
break;
}
+
+ ++it;
}
}
@@ -588,8 +574,7 @@ void ConfigList::setParentMenu(void)
* parent: either the menu list widget or a menu entry widget
* menu: entry to be updated
*/
-template <class P>
-void ConfigList::updateMenuList(P* parent, struct menu* menu)
+void ConfigList::updateMenuList(ConfigItem *parent, struct menu* menu)
{
struct menu* child;
ConfigItem* item;
@@ -598,8 +583,11 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu)
enum prop_type type;
if (!menu) {
- while ((item = parent->firstChild()))
- delete item;
+ while (parent->childCount() > 0)
+ {
+ delete parent->takeChild(0);
+ }
+
return;
}
@@ -651,9 +639,74 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu)
}
}
+void ConfigList::updateMenuList(ConfigList *parent, struct menu* menu)
+{
+ struct menu* child;
+ ConfigItem* item;
+ ConfigItem* last;
+ bool visible;
+ enum prop_type type;
+
+ if (!menu) {
+ while (parent->topLevelItemCount() > 0)
+ {
+ delete parent->takeTopLevelItem(0);
+ }
+
+ return;
+ }
+
+ last = (ConfigItem*)parent->topLevelItem(0);
+ if (last && !last->goParent)
+ last = 0;
+ for (child = menu->list; child; child = child->next) {
+ item = last ? last->nextSibling() : (ConfigItem*)parent->topLevelItem(0);
+ type = child->prompt ? child->prompt->type : P_UNKNOWN;
+
+ switch (mode) {
+ case menuMode:
+ if (!(child->flags & MENU_ROOT))
+ goto hide;
+ break;
+ case symbolMode:
+ if (child->flags & MENU_ROOT)
+ goto hide;
+ break;
+ default:
+ break;
+ }
+
+ visible = menu_is_visible(child);
+ if (!menuSkip(child)) {
+ if (!child->sym && !child->list && !child->prompt)
+ continue;
+ if (!item || item->menu != child)
+ item = new ConfigItem(parent, last, child, visible);
+ else
+ item->testUpdateMenu(visible);
+
+ if (mode == fullMode || mode == menuMode || type != P_MENU)
+ updateMenuList(item, child);
+ else
+ updateMenuList(item, 0);
+ last = item;
+ continue;
+ }
+ hide:
+ if (item && item->menu == child) {
+ last = (ConfigItem*)parent->topLevelItem(0);
+ if (last == item)
+ last = 0;
+ else while (last->nextSibling() != item)
+ last = last->nextSibling();
+ delete item;
+ }
+ }
+}
+
void ConfigList::keyPressEvent(QKeyEvent* ev)
{
- Q3ListViewItem* i = currentItem();
+ QTreeWidgetItem* i = currentItem();
ConfigItem* item;
struct menu *menu;
enum prop_type type;
@@ -705,20 +758,20 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
ev->accept();
}
-void ConfigList::contentsMousePressEvent(QMouseEvent* e)
+void ConfigList::mousePressEvent(QMouseEvent* e)
{
//QPoint p(contentsToViewport(e->pos()));
//printf("contentsMousePressEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMousePressEvent(e);
+ Parent::mousePressEvent(e);
}
-void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e)
+void ConfigList::mouseReleaseEvent(QMouseEvent* e)
{
- QPoint p(contentsToViewport(e->pos()));
+ QPoint p = e->pos();
ConfigItem* item = (ConfigItem*)itemAt(p);
struct menu *menu;
enum prop_type ptype;
- const QPixmap* pm;
+ QIcon icon;
int idx, x;
if (!item)
@@ -726,14 +779,13 @@ void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e)
menu = item->menu;
x = header()->offset() + p.x();
- idx = colRevMap[header()->sectionAt(x)];
+ idx = header()->logicalIndexAt(x);
switch (idx) {
case promptColIdx:
- pm = item->pixmap(promptColIdx);
- if (pm) {
- int off = header()->sectionPos(0) + itemMargin() +
- treeStepSize() * (item->depth() + (rootIsDecorated() ? 1 : 0));
- if (x >= off && x < off + pm->width()) {
+ icon = item->pixmap(promptColIdx);
+ if (!icon.isNull()) {
+ int off = header()->sectionPosition(0) + visualRect(indexAt(p)).x() + 4; // 4 is Hardcoded image offset. There might be a way to do it properly.
+ if (x >= off && x < off + icon.availableSizes().first().width()) {
if (item->goParent) {
emit parentSelected();
break;
@@ -764,19 +816,19 @@ void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e)
skip:
//printf("contentsMouseReleaseEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMouseReleaseEvent(e);
+ Parent::mouseReleaseEvent(e);
}
-void ConfigList::contentsMouseMoveEvent(QMouseEvent* e)
+void ConfigList::mouseMoveEvent(QMouseEvent* e)
{
//QPoint p(contentsToViewport(e->pos()));
//printf("contentsMouseMoveEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMouseMoveEvent(e);
+ Parent::mouseMoveEvent(e);
}
-void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e)
+void ConfigList::mouseDoubleClickEvent(QMouseEvent* e)
{
- QPoint p(contentsToViewport(e->pos()));
+ QPoint p = e->pos(); // TODO: Check if this works(was contentsToViewport).
ConfigItem* item = (ConfigItem*)itemAt(p);
struct menu *menu;
enum prop_type ptype;
@@ -798,7 +850,7 @@ void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e)
skip:
//printf("contentsMouseDoubleClickEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMouseDoubleClickEvent(e);
+ Parent::mouseDoubleClickEvent(e);
}
void ConfigList::focusInEvent(QFocusEvent *e)
@@ -809,7 +861,7 @@ void ConfigList::focusInEvent(QFocusEvent *e)
ConfigItem* item = (ConfigItem *)currentItem();
if (item) {
- setSelected(item, TRUE);
+ item->setSelected(true);
menu = item->menu;
}
emit gotFocus(menu);
@@ -819,33 +871,33 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
{
if (e->y() <= header()->geometry().bottom()) {
if (!headerPopup) {
- Q3Action *action;
+ QAction *action;
- headerPopup = new Q3PopupMenu(this);
- action = new Q3Action(NULL, "Show Name", 0, this);
- action->setToggleAction(TRUE);
+ headerPopup = new QMenu(this);
+ action = new QAction("Show Name", this);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowName(bool)));
connect(parent(), SIGNAL(showNameChanged(bool)),
action, SLOT(setOn(bool)));
- action->setOn(showName);
- action->addTo(headerPopup);
- action = new Q3Action(NULL, "Show Range", 0, this);
- action->setToggleAction(TRUE);
+ action->setChecked(showName);
+ headerPopup->addAction(action);
+ action = new QAction("Show Range", this);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowRange(bool)));
connect(parent(), SIGNAL(showRangeChanged(bool)),
action, SLOT(setOn(bool)));
- action->setOn(showRange);
- action->addTo(headerPopup);
- action = new Q3Action(NULL, "Show Data", 0, this);
- action->setToggleAction(TRUE);
+ action->setChecked(showRange);
+ headerPopup->addAction(action);
+ action = new QAction("Show Data", this);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowData(bool)));
connect(parent(), SIGNAL(showDataChanged(bool)),
action, SLOT(setOn(bool)));
- action->setOn(showData);
- action->addTo(headerPopup);
+ action->setChecked(showData);
+ headerPopup->addAction(action);
}
headerPopup->exec(e->globalPos());
e->accept();
@@ -859,11 +911,17 @@ QAction *ConfigView::showAllAction;
QAction *ConfigView::showPromptAction;
ConfigView::ConfigView(QWidget* parent, const char *name)
- : Parent(parent, name)
+ : Parent(parent)
{
- list = new ConfigList(this, name);
+ setObjectName(name);
+ QVBoxLayout *verticalLayout = new QVBoxLayout(this);
+ verticalLayout->setContentsMargins(0, 0, 0, 0);
+
+ list = new ConfigList(this);
+ verticalLayout->addWidget(list);
lineEdit = new ConfigLineEdit(this);
lineEdit->hide();
+ verticalLayout->addWidget(lineEdit);
this->nextView = viewList;
viewList = this;
@@ -922,10 +980,13 @@ void ConfigView::setShowData(bool b)
void ConfigList::setAllOpen(bool open)
{
- Q3ListViewItemIterator it(this);
+ QTreeWidgetItemIterator it(this);
- for (; it.current(); it++)
- it.current()->setOpen(open);
+ while (*it) {
+ (*it)->setExpanded(open);
+
+ ++it;
+ }
}
void ConfigView::updateList(ConfigItem* item)
@@ -945,11 +1006,14 @@ void ConfigView::updateListAll(void)
}
ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
- : Parent(parent, name), sym(0), _menu(0)
+ : Parent(parent), sym(0), _menu(0)
{
- if (name) {
- configSettings->beginGroup(name);
- _showDebug = configSettings->readBoolEntry("/showDebug", false);
+ setObjectName(name);
+
+
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ setShowDebug(configSettings->value("/showDebug", false).toBool());
configSettings->endGroup();
connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
}
@@ -957,9 +1021,9 @@ ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
void ConfigInfoView::saveSettings(void)
{
- if (name()) {
- configSettings->beginGroup(name());
- configSettings->writeEntry("/showDebug", showDebug());
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ configSettings->setValue("/showDebug", showDebug());
configSettings->endGroup();
}
}
@@ -1085,7 +1149,6 @@ QString ConfigInfoView::debug_info(struct symbol *sym)
case P_DEFAULT:
case P_SELECT:
case P_RANGE:
- case P_ENV:
debug += prop_get_type_name(prop->type);
debug += ": ";
expr_print(prop->expr, expr_print_help, &debug, E_NONE);
@@ -1118,8 +1181,8 @@ QString ConfigInfoView::print_filter(const QString &str)
{
QRegExp re("[<>&\"\\n]");
QString res = str;
- for (int i = 0; (i = res.find(re, i)) >= 0;) {
- switch (res[i].latin1()) {
+ for (int i = 0; (i = res.indexOf(re, i)) >= 0;) {
+ switch (res[i].toLatin1()) {
case '<':
res.replace(i, 1, "<");
i += 4;
@@ -1158,37 +1221,42 @@ void ConfigInfoView::expr_print_help(void *data, struct symbol *sym, const char
*text += str2;
}
-Q3PopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos)
+QMenu* ConfigInfoView::createStandardContextMenu(const QPoint & pos)
{
- Q3PopupMenu* popup = Parent::createPopupMenu(pos);
- Q3Action* action = new Q3Action(NULL, "Show Debug Info", 0, popup);
- action->setToggleAction(TRUE);
+ QMenu* popup = Parent::createStandardContextMenu(pos);
+ QAction* action = new QAction("Show Debug Info", popup);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
- action->setOn(showDebug());
- popup->insertSeparator();
- action->addTo(popup);
+ action->setChecked(showDebug());
+ popup->addSeparator();
+ popup->addAction(action);
return popup;
}
-void ConfigInfoView::contentsContextMenuEvent(QContextMenuEvent *e)
+void ConfigInfoView::contextMenuEvent(QContextMenuEvent *e)
{
- Parent::contentsContextMenuEvent(e);
+ Parent::contextMenuEvent(e);
}
ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *name)
- : Parent(parent, name), result(NULL)
+ : Parent(parent), result(NULL)
{
- setCaption("Search Config");
+ setObjectName(name);
+ setWindowTitle("Search Config");
- QVBoxLayout* layout1 = new QVBoxLayout(this, 11, 6);
- QHBoxLayout* layout2 = new QHBoxLayout(0, 0, 6);
+ QVBoxLayout* layout1 = new QVBoxLayout(this);
+ layout1->setContentsMargins(11, 11, 11, 11);
+ layout1->setSpacing(6);
+ QHBoxLayout* layout2 = new QHBoxLayout(0);
+ layout2->setContentsMargins(0, 0, 0, 0);
+ layout2->setSpacing(6);
layout2->addWidget(new QLabel("Find:", this));
editField = new QLineEdit(this);
connect(editField, SIGNAL(returnPressed()), SLOT(search()));
layout2->addWidget(editField);
searchButton = new QPushButton("Search", this);
- searchButton->setAutoDefault(FALSE);
+ searchButton->setAutoDefault(false);
connect(searchButton, SIGNAL(clicked()), SLOT(search()));
layout2->addWidget(searchButton);
layout1->addLayout(layout2);
@@ -1206,19 +1274,19 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam
layout1->addWidget(split);
if (name) {
- int x, y, width, height;
+ QVariant x, y;
+ int width, height;
bool ok;
configSettings->beginGroup(name);
- width = configSettings->readNumEntry("/window width", parent->width() / 2);
- height = configSettings->readNumEntry("/window height", parent->height() / 2);
+ width = configSettings->value("/window width", parent->width() / 2).toInt();
+ height = configSettings->value("/window height", parent->height() / 2).toInt();
resize(width, height);
- x = configSettings->readNumEntry("/window x", 0, &ok);
- if (ok)
- y = configSettings->readNumEntry("/window y", 0, &ok);
- if (ok)
- move(x, y);
- Q3ValueList<int> sizes = configSettings->readSizes("/split", &ok);
+ x = configSettings->value("/window x");
+ y = configSettings->value("/window y");
+ if ((x.isValid())&&(y.isValid()))
+ move(x.toInt(), y.toInt());
+ QList<int> sizes = configSettings->readSizes("/split", &ok);
if (ok)
split->setSizes(sizes);
configSettings->endGroup();
@@ -1228,12 +1296,12 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam
void ConfigSearchWindow::saveSettings(void)
{
- if (name()) {
- configSettings->beginGroup(name());
- configSettings->writeEntry("/window x", pos().x());
- configSettings->writeEntry("/window y", pos().y());
- configSettings->writeEntry("/window width", size().width());
- configSettings->writeEntry("/window height", size().height());
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ configSettings->setValue("/window x", pos().x());
+ configSettings->setValue("/window y", pos().y());
+ configSettings->setValue("/window width", size().width());
+ configSettings->setValue("/window height", size().height());
configSettings->writeSizes("/split", split->sizes());
configSettings->endGroup();
}
@@ -1249,7 +1317,7 @@ void ConfigSearchWindow::search(void)
list->list->clear();
info->clear();
- result = sym_re_search(editField->text().latin1());
+ result = sym_re_search(editField->text().toLatin1());
if (!result)
return;
for (p = result; *p; p++) {
@@ -1266,29 +1334,25 @@ ConfigMainWindow::ConfigMainWindow(void)
: searchWindow(0)
{
QMenuBar* menu;
- bool ok;
- int x, y, width, height;
+ bool ok = true;
+ QVariant x, y;
+ int width, height;
char title[256];
QDesktopWidget *d = configApp->desktop();
snprintf(title, sizeof(title), "%s%s",
rootmenu.prompt->text,
-#if QT_VERSION < 0x040000
- " (Qt3)"
-#else
""
-#endif
);
- setCaption(title);
+ setWindowTitle(title);
- width = configSettings->readNumEntry("/window width", d->width() - 64);
- height = configSettings->readNumEntry("/window height", d->height() - 64);
+ width = configSettings->value("/window width", d->width() - 64).toInt();
+ height = configSettings->value("/window height", d->height() - 64).toInt();
resize(width, height);
- x = configSettings->readNumEntry("/window x", 0, &ok);
- if (ok)
- y = configSettings->readNumEntry("/window y", 0, &ok);
- if (ok)
- move(x, y);
+ x = configSettings->value("/window x");
+ y = configSettings->value("/window y");
+ if ((x.isValid())&&(y.isValid()))
+ move(x.toInt(), y.toInt());
split1 = new QSplitter(this);
split1->setOrientation(Qt::Horizontal);
@@ -1305,127 +1369,118 @@ ConfigMainWindow::ConfigMainWindow(void)
configList = configView->list;
helpText = new ConfigInfoView(split2, "help");
- helpText->setTextFormat(Qt::RichText);
setTabOrder(configList, helpText);
configList->setFocus();
menu = menuBar();
- toolBar = new Q3ToolBar("Tools", this);
-
- backAction = new Q3Action("Back", QPixmap(xpm_back), "Back", 0, this);
- connect(backAction, SIGNAL(activated()), SLOT(goBack()));
- backAction->setEnabled(FALSE);
- Q3Action *quitAction = new Q3Action("Quit", "&Quit", Qt::CTRL + Qt::Key_Q, this);
- connect(quitAction, SIGNAL(activated()), SLOT(close()));
- Q3Action *loadAction = new Q3Action("Load", QPixmap(xpm_load), "&Load", Qt::CTRL + Qt::Key_L, this);
- connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
- saveAction = new Q3Action("Save", QPixmap(xpm_save), "&Save", Qt::CTRL + Qt::Key_S, this);
- connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
+ toolBar = new QToolBar("Tools", this);
+ addToolBar(toolBar);
+
+ backAction = new QAction(QPixmap(xpm_back), "Back", this);
+ connect(backAction, SIGNAL(triggered(bool)), SLOT(goBack()));
+ backAction->setEnabled(false);
+ QAction *quitAction = new QAction("&Quit", this);
+ quitAction->setShortcut(Qt::CTRL + Qt::Key_Q);
+ connect(quitAction, SIGNAL(triggered(bool)), SLOT(close()));
+ QAction *loadAction = new QAction(QPixmap(xpm_load), "&Load", this);
+ loadAction->setShortcut(Qt::CTRL + Qt::Key_L);
+ connect(loadAction, SIGNAL(triggered(bool)), SLOT(loadConfig()));
+ saveAction = new QAction(QPixmap(xpm_save), "&Save", this);
+ saveAction->setShortcut(Qt::CTRL + Qt::Key_S);
+ connect(saveAction, SIGNAL(triggered(bool)), SLOT(saveConfig()));
conf_set_changed_callback(conf_changed);
// Set saveAction's initial state
conf_changed();
- Q3Action *saveAsAction = new Q3Action("Save As...", "Save &As...", 0, this);
- connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
- Q3Action *searchAction = new Q3Action("Find", "&Find", Qt::CTRL + Qt::Key_F, this);
- connect(searchAction, SIGNAL(activated()), SLOT(searchConfig()));
- Q3Action *singleViewAction = new Q3Action("Single View", QPixmap(xpm_single_view), "Single View", 0, this);
- connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView()));
- Q3Action *splitViewAction = new Q3Action("Split View", QPixmap(xpm_split_view), "Split View", 0, this);
- connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView()));
- Q3Action *fullViewAction = new Q3Action("Full View", QPixmap(xpm_tree_view), "Full View", 0, this);
- connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView()));
-
- Q3Action *showNameAction = new Q3Action(NULL, "Show Name", 0, this);
- showNameAction->setToggleAction(TRUE);
+ configname = xstrdup(conf_get_configname());
+
+ QAction *saveAsAction = new QAction("Save &As...", this);
+ connect(saveAsAction, SIGNAL(triggered(bool)), SLOT(saveConfigAs()));
+ QAction *searchAction = new QAction("&Find", this);
+ searchAction->setShortcut(Qt::CTRL + Qt::Key_F);
+ connect(searchAction, SIGNAL(triggered(bool)), SLOT(searchConfig()));
+ singleViewAction = new QAction(QPixmap(xpm_single_view), "Single View", this);
+ singleViewAction->setCheckable(true);
+ connect(singleViewAction, SIGNAL(triggered(bool)), SLOT(showSingleView()));
+ splitViewAction = new QAction(QPixmap(xpm_split_view), "Split View", this);
+ splitViewAction->setCheckable(true);
+ connect(splitViewAction, SIGNAL(triggered(bool)), SLOT(showSplitView()));
+ fullViewAction = new QAction(QPixmap(xpm_tree_view), "Full View", this);
+ fullViewAction->setCheckable(true);
+ connect(fullViewAction, SIGNAL(triggered(bool)), SLOT(showFullView()));
+
+ QAction *showNameAction = new QAction("Show Name", this);
+ showNameAction->setCheckable(true);
connect(showNameAction, SIGNAL(toggled(bool)), configView, SLOT(setShowName(bool)));
- connect(configView, SIGNAL(showNameChanged(bool)), showNameAction, SLOT(setOn(bool)));
- showNameAction->setOn(configView->showName());
- Q3Action *showRangeAction = new Q3Action(NULL, "Show Range", 0, this);
- showRangeAction->setToggleAction(TRUE);
+ showNameAction->setChecked(configView->showName());
+ QAction *showRangeAction = new QAction("Show Range", this);
+ showRangeAction->setCheckable(true);
connect(showRangeAction, SIGNAL(toggled(bool)), configView, SLOT(setShowRange(bool)));
- connect(configView, SIGNAL(showRangeChanged(bool)), showRangeAction, SLOT(setOn(bool)));
- showRangeAction->setOn(configList->showRange);
- Q3Action *showDataAction = new Q3Action(NULL, "Show Data", 0, this);
- showDataAction->setToggleAction(TRUE);
+ QAction *showDataAction = new QAction("Show Data", this);
+ showDataAction->setCheckable(true);
connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool)));
- connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool)));
- showDataAction->setOn(configList->showData);
QActionGroup *optGroup = new QActionGroup(this);
- optGroup->setExclusive(TRUE);
- connect(optGroup, SIGNAL(selected(QAction *)), configView,
+ optGroup->setExclusive(true);
+ connect(optGroup, SIGNAL(triggered(QAction*)), configView,
SLOT(setOptionMode(QAction *)));
- connect(optGroup, SIGNAL(selected(QAction *)), menuView,
+ connect(optGroup, SIGNAL(triggered(QAction *)), menuView,
SLOT(setOptionMode(QAction *)));
-#if QT_VERSION >= 0x040000
configView->showNormalAction = new QAction("Show Normal Options", optGroup);
configView->showAllAction = new QAction("Show All Options", optGroup);
configView->showPromptAction = new QAction("Show Prompt Options", optGroup);
-#else
- configView->showNormalAction = new QAction("Show Normal Options", 0, optGroup);
- configView->showAllAction = new QAction("Show All Options", 0, optGroup);
- configView->showPromptAction = new QAction("Show Prompt Options", 0, optGroup);
-#endif
- configView->showNormalAction->setToggleAction(TRUE);
- configView->showNormalAction->setOn(configList->optMode == normalOpt);
- configView->showAllAction->setToggleAction(TRUE);
- configView->showAllAction->setOn(configList->optMode == allOpt);
- configView->showPromptAction->setToggleAction(TRUE);
- configView->showPromptAction->setOn(configList->optMode == promptOpt);
-
- Q3Action *showDebugAction = new Q3Action(NULL, "Show Debug Info", 0, this);
- showDebugAction->setToggleAction(TRUE);
+ configView->showNormalAction->setCheckable(true);
+ configView->showAllAction->setCheckable(true);
+ configView->showPromptAction->setCheckable(true);
+
+ QAction *showDebugAction = new QAction("Show Debug Info", this);
+ showDebugAction->setCheckable(true);
connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool)));
- connect(helpText, SIGNAL(showDebugChanged(bool)), showDebugAction, SLOT(setOn(bool)));
- showDebugAction->setOn(helpText->showDebug());
+ showDebugAction->setChecked(helpText->showDebug());
- Q3Action *showIntroAction = new Q3Action(NULL, "Introduction", 0, this);
- connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro()));
- Q3Action *showAboutAction = new Q3Action(NULL, "About", 0, this);
- connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout()));
+ QAction *showIntroAction = new QAction("Introduction", this);
+ connect(showIntroAction, SIGNAL(triggered(bool)), SLOT(showIntro()));
+ QAction *showAboutAction = new QAction("About", this);
+ connect(showAboutAction, SIGNAL(triggered(bool)), SLOT(showAbout()));
// init tool bar
- backAction->addTo(toolBar);
+ toolBar->addAction(backAction);
toolBar->addSeparator();
- loadAction->addTo(toolBar);
- saveAction->addTo(toolBar);
+ toolBar->addAction(loadAction);
+ toolBar->addAction(saveAction);
toolBar->addSeparator();
- singleViewAction->addTo(toolBar);
- splitViewAction->addTo(toolBar);
- fullViewAction->addTo(toolBar);
+ toolBar->addAction(singleViewAction);
+ toolBar->addAction(splitViewAction);
+ toolBar->addAction(fullViewAction);
// create config menu
- Q3PopupMenu* config = new Q3PopupMenu(this);
- menu->insertItem("&File", config);
- loadAction->addTo(config);
- saveAction->addTo(config);
- saveAsAction->addTo(config);
- config->insertSeparator();
- quitAction->addTo(config);
+ QMenu* config = menu->addMenu("&File");
+ config->addAction(loadAction);
+ config->addAction(saveAction);
+ config->addAction(saveAsAction);
+ config->addSeparator();
+ config->addAction(quitAction);
// create edit menu
- Q3PopupMenu* editMenu = new Q3PopupMenu(this);
- menu->insertItem("&Edit", editMenu);
- searchAction->addTo(editMenu);
+ QMenu* editMenu = menu->addMenu("&Edit");
+ editMenu->addAction(searchAction);
// create options menu
- Q3PopupMenu* optionMenu = new Q3PopupMenu(this);
- menu->insertItem("&Option", optionMenu);
- showNameAction->addTo(optionMenu);
- showRangeAction->addTo(optionMenu);
- showDataAction->addTo(optionMenu);
- optionMenu->insertSeparator();
- optGroup->addTo(optionMenu);
- optionMenu->insertSeparator();
+ QMenu* optionMenu = menu->addMenu("&Option");
+ optionMenu->addAction(showNameAction);
+ optionMenu->addAction(showRangeAction);
+ optionMenu->addAction(showDataAction);
+ optionMenu->addSeparator();
+ optionMenu->addActions(optGroup->actions());
+ optionMenu->addSeparator();
+ optionMenu->addAction(showDebugAction);
// create help menu
- Q3PopupMenu* helpMenu = new Q3PopupMenu(this);
- menu->insertSeparator();
- menu->insertItem("&Help", helpMenu);
- showIntroAction->addTo(helpMenu);
- showAboutAction->addTo(helpMenu);
+ menu->addSeparator();
+ QMenu* helpMenu = menu->addMenu("&Help");
+ helpMenu->addAction(showIntroAction);
+ helpMenu->addAction(showAboutAction);
connect(configList, SIGNAL(menuChanged(struct menu *)),
helpText, SLOT(setInfo(struct menu *)));
@@ -1447,7 +1502,7 @@ ConfigMainWindow::ConfigMainWindow(void)
connect(helpText, SIGNAL(menuSelected(struct menu *)),
SLOT(setMenuLink(struct menu *)));
- QString listMode = configSettings->readEntry("/listMode", "symbol");
+ QString listMode = configSettings->value("/listMode", "symbol").toString();
if (listMode == "single")
showSingleView();
else if (listMode == "full")
@@ -1456,7 +1511,7 @@ ConfigMainWindow::ConfigMainWindow(void)
showSplitView();
// UI setup done, restore splitter positions
- Q3ValueList<int> sizes = configSettings->readSizes("/split1", &ok);
+ QList<int> sizes = configSettings->readSizes("/split1", &ok);
if (ok)
split1->setSizes(sizes);
@@ -1467,29 +1522,57 @@ ConfigMainWindow::ConfigMainWindow(void)
void ConfigMainWindow::loadConfig(void)
{
- QString s = Q3FileDialog::getOpenFileName(conf_get_configname(), NULL, this);
- if (s.isNull())
+ QString str;
+ QByteArray ba;
+ const char *name;
+
+ str = QFileDialog::getOpenFileName(this, "", configname);
+ if (str.isNull())
return;
- if (conf_read(QFile::encodeName(s)))
+
+ ba = str.toLocal8Bit();
+ name = ba.data();
+
+ if (conf_read(name))
QMessageBox::information(this, "qconf", "Unable to load configuration!");
+
+ free(configname);
+ configname = xstrdup(name);
+
ConfigView::updateListAll();
}
bool ConfigMainWindow::saveConfig(void)
{
- if (conf_write(NULL)) {
+ if (conf_write(configname)) {
QMessageBox::information(this, "qconf", "Unable to save configuration!");
return false;
}
+ conf_write_autoconf(0);
+
return true;
}
void ConfigMainWindow::saveConfigAs(void)
{
- QString s = Q3FileDialog::getSaveFileName(conf_get_configname(), NULL, this);
- if (s.isNull())
+ QString str;
+ QByteArray ba;
+ const char *name;
+
+ str = QFileDialog::getSaveFileName(this, "", configname);
+ if (str.isNull())
return;
- saveConfig();
+
+ ba = str.toLocal8Bit();
+ name = ba.data();
+
+ if (conf_write(name)) {
+ QMessageBox::information(this, "qconf", "Unable to save configuration!");
+ }
+ conf_write_autoconf(0);
+
+ free(configname);
+ configname = xstrdup(name);
}
void ConfigMainWindow::searchConfig(void)
@@ -1503,9 +1586,9 @@ void ConfigMainWindow::changeMenu(struct menu *menu)
{
configList->setRootMenu(menu);
if (configList->rootEntry->parent == &rootmenu)
- backAction->setEnabled(FALSE);
+ backAction->setEnabled(false);
else
- backAction->setEnabled(TRUE);
+ backAction->setEnabled(true);
}
void ConfigMainWindow::setMenuLink(struct menu *menu)
@@ -1537,8 +1620,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu)
return;
item = menuList->findConfigItem(parent);
if (item) {
- menuList->setSelected(item, TRUE);
- menuList->ensureItemVisible(item);
+ item->setSelected(true);
+ menuList->scrollToItem(item);
}
list->setRootMenu(parent);
}
@@ -1553,8 +1636,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu)
if (list) {
item = list->findConfigItem(menu);
if (item) {
- list->setSelected(item, TRUE);
- list->ensureItemVisible(item);
+ item->setSelected(true);
+ list->scrollToItem(item);
list->setFocus();
}
}
@@ -1568,15 +1651,21 @@ void ConfigMainWindow::listFocusChanged(void)
void ConfigMainWindow::goBack(void)
{
- ConfigItem* item;
+ ConfigItem* item, *oldSelection;
configList->setParentMenu();
if (configList->rootEntry == &rootmenu)
- backAction->setEnabled(FALSE);
- item = (ConfigItem*)menuList->selectedItem();
+ backAction->setEnabled(false);
+
+ if (menuList->selectedItems().count() == 0)
+ return;
+
+ item = (ConfigItem*)menuList->selectedItems().first();
+ oldSelection = item;
while (item) {
if (item->menu == configList->rootEntry) {
- menuList->setSelected(item, TRUE);
+ oldSelection->setSelected(false);
+ item->setSelected(true);
break;
}
item = (ConfigItem*)item->parent();
@@ -1585,6 +1674,13 @@ void ConfigMainWindow::goBack(void)
void ConfigMainWindow::showSingleView(void)
{
+ singleViewAction->setEnabled(false);
+ singleViewAction->setChecked(true);
+ splitViewAction->setEnabled(true);
+ splitViewAction->setChecked(false);
+ fullViewAction->setEnabled(true);
+ fullViewAction->setChecked(false);
+
menuView->hide();
menuList->setRootMenu(0);
configList->mode = singleMode;
@@ -1592,28 +1688,41 @@ void ConfigMainWindow::showSingleView(void)
configList->updateListAll();
else
configList->setRootMenu(&rootmenu);
- configList->setAllOpen(TRUE);
configList->setFocus();
}
void ConfigMainWindow::showSplitView(void)
{
+ singleViewAction->setEnabled(true);
+ singleViewAction->setChecked(false);
+ splitViewAction->setEnabled(false);
+ splitViewAction->setChecked(true);
+ fullViewAction->setEnabled(true);
+ fullViewAction->setChecked(false);
+
configList->mode = symbolMode;
if (configList->rootEntry == &rootmenu)
configList->updateListAll();
else
configList->setRootMenu(&rootmenu);
- configList->setAllOpen(TRUE);
+ configList->setAllOpen(true);
configApp->processEvents();
menuList->mode = menuMode;
menuList->setRootMenu(&rootmenu);
- menuList->setAllOpen(TRUE);
+ menuList->setAllOpen(true);
menuView->show();
menuList->setFocus();
}
void ConfigMainWindow::showFullView(void)
{
+ singleViewAction->setEnabled(true);
+ singleViewAction->setChecked(false);
+ splitViewAction->setEnabled(true);
+ splitViewAction->setChecked(false);
+ fullViewAction->setEnabled(false);
+ fullViewAction->setChecked(true);
+
menuView->hide();
menuList->setRootMenu(0);
configList->mode = fullMode;
@@ -1621,7 +1730,6 @@ void ConfigMainWindow::showFullView(void)
configList->updateListAll();
else
configList->setRootMenu(&rootmenu);
- configList->setAllOpen(FALSE);
configList->setFocus();
}
@@ -1668,14 +1776,15 @@ void ConfigMainWindow::showIntro(void)
"options must be enabled to support the option you are interested in, you can\n"
"still view the help of a grayed-out option.\n\n"
"Toggling Show Debug Info under the Options menu will show the dependencies,\n"
- "which you can then match by examining other options.\n\n");
+ "which you can then match by examining other options.\n\n";
QMessageBox::information(this, "qconf", str);
}
void ConfigMainWindow::showAbout(void)
{
- static const QString str = "qconf is Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>.\n\n"
+ static const QString str = "qconf is Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>.\n"
+ "Copyright (C) 2015 Boris Barbulovski <bbarbulovski@gmail.com>.\n\n"
"Bug reports and feature request can also be entered at http://bugzilla.kernel.org/\n";
QMessageBox::information(this, "qconf", str);
@@ -1683,10 +1792,10 @@ void ConfigMainWindow::showAbout(void)
void ConfigMainWindow::saveSettings(void)
{
- configSettings->writeEntry("/window x", pos().x());
- configSettings->writeEntry("/window y", pos().y());
- configSettings->writeEntry("/window width", size().width());
- configSettings->writeEntry("/window height", size().height());
+ configSettings->setValue("/window x", pos().x());
+ configSettings->setValue("/window y", pos().y());
+ configSettings->setValue("/window width", size().width());
+ configSettings->setValue("/window height", size().height());
QString entry;
switch(configList->mode) {
@@ -1705,7 +1814,7 @@ void ConfigMainWindow::saveSettings(void)
default:
break;
}
- configSettings->writeEntry("/listMode", entry);
+ configSettings->setValue("/listMode", entry);
configSettings->writeSizes("/split1", split1->sizes());
configSettings->writeSizes("/split2", split2->sizes());
@@ -1773,7 +1882,6 @@ int main(int ac, char** av)
v = new ConfigMainWindow();
//zconfdump(stdout);
- configApp->setMainWidget(v);
configApp->connect(configApp, SIGNAL(lastWindowClosed()), SLOT(quit()));
configApp->connect(configApp, SIGNAL(aboutToQuit()), v, SLOT(saveSettings()));
v->show();
@@ -1781,6 +1889,8 @@ int main(int ac, char** av)
configSettings->endGroup();
delete configSettings;
+ delete v;
+ delete configApp;
return 0;
}
@@ -1,28 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
-#if QT_VERSION < 0x040000
-#include <qlistview.h>
-#else
-#include <q3listview.h>
-#endif
+#include <QTextBrowser>
+#include <QTreeWidget>
+#include <QMainWindow>
+#include <QHeaderView>
#include <qsettings.h>
-
-#if QT_VERSION < 0x040000
-#define Q3ValueList QValueList
-#define Q3PopupMenu QPopupMenu
-#define Q3ListView QListView
-#define Q3ListViewItem QListViewItem
-#define Q3VBox QVBox
-#define Q3TextBrowser QTextBrowser
-#define Q3MainWindow QMainWindow
-#define Q3Action QAction
-#define Q3ToolBar QToolBar
-#define Q3ListViewItemIterator QListViewItemIterator
-#define Q3FileDialog QFileDialog
-#endif
+#include <QPushButton>
+#include <QSettings>
+#include <QLineEdit>
+#include <QSplitter>
+#include <QCheckBox>
+#include <QDialog>
+#include "expr.h"
class ConfigView;
class ConfigList;
@@ -33,8 +25,8 @@ class ConfigMainWindow;
class ConfigSettings : public QSettings {
public:
ConfigSettings();
- Q3ValueList<int> readSizes(const QString& key, bool *ok);
- bool writeSizes(const QString& key, const Q3ValueList<int>& value);
+ QList<int> readSizes(const QString& key, bool *ok);
+ bool writeSizes(const QString& key, const QList<int>& value);
};
enum colIdx {
@@ -47,9 +39,9 @@ enum optionMode {
normalOpt = 0, allOpt, promptOpt
};
-class ConfigList : public Q3ListView {
+class ConfigList : public QTreeWidget {
Q_OBJECT
- typedef class Q3ListView Parent;
+ typedef class QTreeWidget Parent;
public:
ConfigList(ConfigView* p, const char *name = 0);
void reinit(void);
@@ -61,10 +53,10 @@ class ConfigList : public Q3ListView {
protected:
void keyPressEvent(QKeyEvent *e);
- void contentsMousePressEvent(QMouseEvent *e);
- void contentsMouseReleaseEvent(QMouseEvent *e);
- void contentsMouseMoveEvent(QMouseEvent *e);
- void contentsMouseDoubleClickEvent(QMouseEvent *e);
+ void mousePressEvent(QMouseEvent *e);
+ void mouseReleaseEvent(QMouseEvent *e);
+ void mouseMoveEvent(QMouseEvent *e);
+ void mouseDoubleClickEvent(QMouseEvent *e);
void focusInEvent(QFocusEvent *e);
void contextMenuEvent(QContextMenuEvent *e);
@@ -95,32 +87,23 @@ public slots:
}
ConfigItem* firstChild() const
{
- return (ConfigItem *)Parent::firstChild();
- }
- int mapIdx(colIdx idx)
- {
- return colMap[idx];
+ return (ConfigItem *)children().first();
}
- void addColumn(colIdx idx, const QString& label)
+ void addColumn(colIdx idx)
{
- colMap[idx] = Parent::addColumn(label);
- colRevMap[colMap[idx]] = idx;
+ showColumn(idx);
}
void removeColumn(colIdx idx)
{
- int col = colMap[idx];
- if (col >= 0) {
- Parent::removeColumn(col);
- colRevMap[col] = colMap[idx] = -1;
- }
+ hideColumn(idx);
}
void setAllOpen(bool open);
void setParentMenu(void);
bool menuSkip(struct menu *);
- template <class P>
- void updateMenuList(P*, struct menu*);
+ void updateMenuList(ConfigItem *parent, struct menu*);
+ void updateMenuList(ConfigList *parent, struct menu*);
bool updateAll;
@@ -132,30 +115,26 @@ public slots:
enum listMode mode;
enum optionMode optMode;
struct menu *rootEntry;
- QColorGroup disabledColorGroup;
- QColorGroup inactivedColorGroup;
- Q3PopupMenu* headerPopup;
-
-private:
- int colMap[colNr];
- int colRevMap[colNr];
+ QPalette disabledColorGroup;
+ QPalette inactivedColorGroup;
+ QMenu* headerPopup;
};
-class ConfigItem : public Q3ListViewItem {
- typedef class Q3ListViewItem Parent;
+class ConfigItem : public QTreeWidgetItem {
+ typedef class QTreeWidgetItem Parent;
public:
- ConfigItem(Q3ListView *parent, ConfigItem *after, struct menu *m, bool v)
- : Parent(parent, after), menu(m), visible(v), goParent(false)
+ ConfigItem(ConfigList *parent, ConfigItem *after, struct menu *m, bool v)
+ : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false)
{
init();
}
ConfigItem(ConfigItem *parent, ConfigItem *after, struct menu *m, bool v)
- : Parent(parent, after), menu(m), visible(v), goParent(false)
+ : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false)
{
init();
}
- ConfigItem(Q3ListView *parent, ConfigItem *after, bool v)
- : Parent(parent, after), menu(0), visible(v), goParent(true)
+ ConfigItem(ConfigList *parent, ConfigItem *after, bool v)
+ : Parent(parent, after), nextItem(0), menu(0), visible(v), goParent(true)
{
init();
}
@@ -166,33 +145,43 @@ class ConfigItem : public Q3ListViewItem {
void testUpdateMenu(bool v);
ConfigList* listView() const
{
- return (ConfigList*)Parent::listView();
+ return (ConfigList*)Parent::treeWidget();
}
ConfigItem* firstChild() const
{
- return (ConfigItem *)Parent::firstChild();
+ return (ConfigItem *)Parent::child(0);
}
- ConfigItem* nextSibling() const
+ ConfigItem* nextSibling()
{
- return (ConfigItem *)Parent::nextSibling();
+ ConfigItem *ret = NULL;
+ ConfigItem *_parent = (ConfigItem *)parent();
+
+ if(_parent) {
+ ret = (ConfigItem *)_parent->child(_parent->indexOfChild(this)+1);
+ } else {
+ QTreeWidget *_treeWidget = treeWidget();
+ ret = (ConfigItem *)_treeWidget->topLevelItem(_treeWidget->indexOfTopLevelItem(this)+1);
+ }
+
+ return ret;
}
void setText(colIdx idx, const QString& text)
{
- Parent::setText(listView()->mapIdx(idx), text);
+ Parent::setText(idx, text);
}
QString text(colIdx idx) const
{
- return Parent::text(listView()->mapIdx(idx));
+ return Parent::text(idx);
}
- void setPixmap(colIdx idx, const QPixmap& pm)
+ void setPixmap(colIdx idx, const QIcon &icon)
{
- Parent::setPixmap(listView()->mapIdx(idx), pm);
+ Parent::setIcon(idx, icon);
}
- const QPixmap* pixmap(colIdx idx) const
+ const QIcon pixmap(colIdx idx) const
{
- return Parent::pixmap(listView()->mapIdx(idx));
+ return icon(idx);
}
- void paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align);
+ // TODO: Implement paintCell
ConfigItem* nextItem;
struct menu *menu;
@@ -216,9 +205,9 @@ class ConfigLineEdit : public QLineEdit {
ConfigItem *item;
};
-class ConfigView : public Q3VBox {
+class ConfigView : public QWidget {
Q_OBJECT
- typedef class Q3VBox Parent;
+ typedef class QWidget Parent;
public:
ConfigView(QWidget* parent, const char *name = 0);
~ConfigView(void);
@@ -249,9 +238,9 @@ public slots:
static QAction *showPromptAction;
};
-class ConfigInfoView : public Q3TextBrowser {
+class ConfigInfoView : public QTextBrowser {
Q_OBJECT
- typedef class Q3TextBrowser Parent;
+ typedef class QTextBrowser Parent;
public:
ConfigInfoView(QWidget* parent, const char *name = 0);
bool showDebug(void) const { return _showDebug; }
@@ -271,8 +260,8 @@ public slots:
QString debug_info(struct symbol *sym);
static QString print_filter(const QString &str);
static void expr_print_help(void *data, struct symbol *sym, const char *str);
- Q3PopupMenu* createPopupMenu(const QPoint& pos);
- void contentsContextMenuEvent(QContextMenuEvent *e);
+ QMenu *createStandardContextMenu(const QPoint & pos);
+ void contextMenuEvent(QContextMenuEvent *e);
struct symbol *sym;
struct menu *_menu;
@@ -299,10 +288,11 @@ public slots:
struct symbol **result;
};
-class ConfigMainWindow : public Q3MainWindow {
+class ConfigMainWindow : public QMainWindow {
Q_OBJECT
- static Q3Action *saveAction;
+ char *configname;
+ static QAction *saveAction;
static void conf_changed(void);
public:
ConfigMainWindow(void);
@@ -331,8 +321,11 @@ public slots:
ConfigView *configView;
ConfigList *configList;
ConfigInfoView *helpText;
- Q3ToolBar *toolBar;
- Q3Action *backAction;
- QSplitter* split1;
- QSplitter* split2;
+ QToolBar *toolBar;
+ QAction *backAction;
+ QAction *singleViewAction;
+ QAction *splitViewAction;
+ QAction *fullViewAction;
+ QSplitter *split1;
+ QSplitter *split2;
};
@@ -1,7 +1,7 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
#
# Copyright 2005-2009 - Steven Rostedt
-# Licensed under the terms of the GNU GPL License version 2
#
# It's simple enough to figure out how this works.
# If not, then you can ask me at stripconfig@goodmis.org
@@ -42,6 +42,7 @@
# mv config_strip .config
# make oldconfig
#
+use warnings;
use strict;
use Getopt::Long;
@@ -164,10 +165,10 @@ sub read_kconfig {
my $last_source = "";
# Check for any environment variables used
- while ($source =~ /\$(\w+)/ && $last_source ne $source) {
+ while ($source =~ /\$\((\w+)\)/ && $last_source ne $source) {
my $env = $1;
$last_source = $source;
- $source =~ s/\$$env/$ENV{$env}/;
+ $source =~ s/\$\($env\)/$ENV{$env}/;
}
open(my $kinfile, '<', $source) || die "Can't open $kconfig";
@@ -188,7 +189,7 @@ sub read_kconfig {
$cont = 0;
# collect any Kconfig sources
- if (/^source\s*"(.*)"/) {
+ if (/^source\s+"?([^"]+)/) {
my $kconfig = $1;
# prevent reading twice.
if (!defined($read_kconfigs{$kconfig})) {
@@ -237,7 +238,7 @@ sub read_kconfig {
}
# configs without prompts must be selected
- } elsif ($state ne "NONE" && /^\s*tristate\s\S/) {
+ } elsif ($state ne "NONE" && /^\s*(tristate\s+\S|prompt\b)/) {
# note if the config has a prompt
$prompts{$config} = 1;
@@ -256,8 +257,8 @@ sub read_kconfig {
$iflevel-- if ($iflevel);
- # stop on "help"
- } elsif (/^\s*help\s*$/) {
+ # stop on "help" and keywords that end a menu entry
+ } elsif (/^\s*(---)?help(---)?\s*$/ || /^(comment|choice|menu)\b/) {
$state = "NONE";
}
}
@@ -454,7 +455,7 @@ sub parse_config_depends
$p =~ s/^[^$valid]*[$valid]+//;
# We only need to process if the depend config is a module
- if (!defined($orig_configs{$conf}) || !$orig_configs{conf} eq "m") {
+ if (!defined($orig_configs{$conf}) || $orig_configs{$conf} eq "y") {
next;
}
@@ -610,6 +611,40 @@ foreach my $line (@config_file) {
next;
}
+ if (/CONFIG_MODULE_SIG_KEY="(.+)"/) {
+ my $orig_cert = $1;
+ my $default_cert = "certs/signing_key.pem";
+
+ # Check that the logic in this script still matches the one in Kconfig
+ if (!defined($depends{"MODULE_SIG_KEY"}) ||
+ $depends{"MODULE_SIG_KEY"} !~ /"\Q$default_cert\E"/) {
+ print STDERR "WARNING: MODULE_SIG_KEY assertion failure, ",
+ "update needed to ", __FILE__, " line ", __LINE__, "\n";
+ print;
+ } elsif ($orig_cert ne $default_cert && ! -f $orig_cert) {
+ print STDERR "Module signature verification enabled but ",
+ "module signing key \"$orig_cert\" not found. Resetting ",
+ "signing key to default value.\n";
+ print "CONFIG_MODULE_SIG_KEY=\"$default_cert\"\n";
+ } else {
+ print;
+ }
+ next;
+ }
+
+ if (/CONFIG_SYSTEM_TRUSTED_KEYS="(.+)"/) {
+ my $orig_keys = $1;
+
+ if (! -f $orig_keys) {
+ print STDERR "System keyring enabled but keys \"$orig_keys\" ",
+ "not found. Resetting keys to default value.\n";
+ print "CONFIG_SYSTEM_TRUSTED_KEYS=\"\"\n";
+ } else {
+ print;
+ }
+ next;
+ }
+
if (/^(CONFIG.*)=(m|y)/) {
if (defined($configs{$1})) {
if ($localyesconfig) {
@@ -1,6 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
*/
#include <ctype.h>
@@ -33,33 +33,6 @@ struct symbol *sym_defconfig_list;
struct symbol *modules_sym;
tristate modules_val;
-struct expr *sym_env_list;
-
-static void sym_add_default(struct symbol *sym, const char *def)
-{
- struct property *prop = prop_alloc(P_DEFAULT, sym);
-
- prop->expr = expr_alloc_symbol(sym_lookup(def, SYMBOL_CONST));
-}
-
-void sym_init(void)
-{
- struct symbol *sym;
- struct utsname uts;
- static bool inited = false;
-
- if (inited)
- return;
- inited = true;
-
- uname(&uts);
-
- sym = sym_lookup("UNAME_RELEASE", 0);
- sym->type = S_STRING;
- sym->flags |= SYMBOL_AUTO;
- sym_add_default(sym, uts.release);
-}
-
enum symbol_type sym_get_type(struct symbol *sym)
{
enum symbol_type type = sym->type;
@@ -77,7 +50,7 @@ const char *sym_type_name(enum symbol_type type)
{
switch (type) {
case S_BOOLEAN:
- return "boolean";
+ return "bool";
case S_TRISTATE:
return "tristate";
case S_INT:
@@ -88,8 +61,6 @@ const char *sym_type_name(enum symbol_type type)
return "string";
case S_UNKNOWN:
return "unknown";
- case S_OTHER:
- break;
}
return "???";
}
@@ -103,15 +74,6 @@ struct property *sym_get_choice_prop(struct symbol *sym)
return NULL;
}
-struct property *sym_get_env_prop(struct symbol *sym)
-{
- struct property *prop;
-
- for_all_properties(sym, prop, P_ENV)
- return prop;
- return NULL;
-}
-
static struct property *sym_get_default_prop(struct symbol *sym)
{
struct property *prop;
@@ -124,7 +86,7 @@ static struct property *sym_get_default_prop(struct symbol *sym)
return NULL;
}
-static struct property *sym_get_range_prop(struct symbol *sym)
+struct property *sym_get_range_prop(struct symbol *sym)
{
struct property *prop;
@@ -183,7 +145,7 @@ static void sym_validate_range(struct symbol *sym)
sprintf(str, "%lld", val2);
else
sprintf(str, "0x%llx", val2);
- sym->curr.val = strdup(str);
+ sym->curr.val = xstrdup(str);
}
static void sym_set_changed(struct symbol *sym)
@@ -209,12 +171,26 @@ static void sym_set_all_changed(void)
static void sym_calc_visibility(struct symbol *sym)
{
struct property *prop;
+ struct symbol *choice_sym = NULL;
tristate tri;
/* any prompt visible? */
tri = no;
+
+ if (sym_is_choice_value(sym))
+ choice_sym = prop_get_symbol(sym_get_choice_prop(sym));
+
for_all_prompts(sym, prop) {
prop->visible.tri = expr_calc_value(prop->visible.expr);
+ /*
+ * Tristate choice_values with visibility 'mod' are
+ * not visible if the corresponding choice's value is
+ * 'yes'.
+ */
+ if (choice_sym && sym->type == S_TRISTATE &&
+ prop->visible.tri == mod && choice_sym->curr.tri == yes)
+ prop->visible.tri = no;
+
tri = EXPR_OR(tri, prop->visible.tri);
}
if (tri == mod && (sym->type != S_TRISTATE || modules_val == no))
@@ -229,7 +205,7 @@ static void sym_calc_visibility(struct symbol *sym)
tri = yes;
if (sym->dir_dep.expr)
tri = expr_calc_value(sym->dir_dep.expr);
- if (tri == mod)
+ if (tri == mod && sym_get_type(sym) == S_BOOLEAN)
tri = yes;
if (sym->dir_dep.tri != tri) {
sym->dir_dep.tri = tri;
@@ -244,6 +220,15 @@ static void sym_calc_visibility(struct symbol *sym)
sym->rev_dep.tri = tri;
sym_set_changed(sym);
}
+ tri = no;
+ if (sym->implied.expr && sym->dir_dep.tri != no)
+ tri = expr_calc_value(sym->implied.expr);
+ if (tri == mod && sym_get_type(sym) == S_BOOLEAN)
+ tri = yes;
+ if (sym->implied.tri != tri) {
+ sym->implied.tri = tri;
+ sym_set_changed(sym);
+ }
}
/*
@@ -310,6 +295,27 @@ static struct symbol *sym_calc_choice(struct symbol *sym)
return def_sym;
}
+static void sym_warn_unmet_dep(struct symbol *sym)
+{
+ struct gstr gs = str_new();
+
+ str_printf(&gs,
+ "\nWARNING: unmet direct dependencies detected for %s\n",
+ sym->name);
+ str_printf(&gs,
+ " Depends on [%c]: ",
+ sym->dir_dep.tri == mod ? 'm' : 'n');
+ expr_gstr_print(sym->dir_dep.expr, &gs);
+ str_printf(&gs, "\n");
+
+ expr_gstr_print_revdep(sym->rev_dep.expr, &gs, yes,
+ " Selected by [y]:\n");
+ expr_gstr_print_revdep(sym->rev_dep.expr, &gs, mod,
+ " Selected by [m]:\n");
+
+ fputs(str_get(&gs), stderr);
+}
+
void sym_calc_value(struct symbol *sym)
{
struct symbol_value newval, oldval;
@@ -348,11 +354,13 @@ void sym_calc_value(struct symbol *sym)
sym->curr.tri = no;
return;
}
- if (!sym_is_choice_value(sym))
- sym->flags &= ~SYMBOL_WRITE;
+ sym->flags &= ~SYMBOL_WRITE;
sym_calc_visibility(sym);
+ if (sym->visible != no)
+ sym->flags |= SYMBOL_WRITE;
+
/* set default if recursively called */
sym->curr = newval;
@@ -367,7 +375,6 @@ void sym_calc_value(struct symbol *sym)
/* if the symbol is visible use the user value
* if available, otherwise try the default value
*/
- sym->flags |= SYMBOL_WRITE;
if (sym_has_value(sym)) {
newval.tri = EXPR_AND(sym->def[S_DEF_USER].tri,
sym->visible);
@@ -379,38 +386,31 @@ void sym_calc_value(struct symbol *sym)
if (!sym_is_choice(sym)) {
prop = sym_get_default_prop(sym);
if (prop) {
- sym->flags |= SYMBOL_WRITE;
newval.tri = EXPR_AND(expr_calc_value(prop->expr),
prop->visible.tri);
+ if (newval.tri != no)
+ sym->flags |= SYMBOL_WRITE;
+ }
+ if (sym->implied.tri != no) {
+ sym->flags |= SYMBOL_WRITE;
+ newval.tri = EXPR_OR(newval.tri, sym->implied.tri);
}
}
calc_newval:
- if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) {
- struct expr *e;
- e = expr_simplify_unmet_dep(sym->rev_dep.expr,
- sym->dir_dep.expr);
- fprintf(stderr, "warning: (");
- expr_fprint(e, stderr);
- fprintf(stderr, ") selects %s which has unmet direct dependencies (",
- sym->name);
- expr_fprint(sym->dir_dep.expr, stderr);
- fprintf(stderr, ")\n");
- expr_free(e);
- }
+ if (sym->dir_dep.tri < sym->rev_dep.tri)
+ sym_warn_unmet_dep(sym);
newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri);
}
- if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN)
+ if (newval.tri == mod &&
+ (sym_get_type(sym) == S_BOOLEAN || sym->implied.tri == yes))
newval.tri = yes;
break;
case S_STRING:
case S_HEX:
case S_INT:
- if (sym->visible != no) {
- sym->flags |= SYMBOL_WRITE;
- if (sym_has_value(sym)) {
- newval.val = sym->def[S_DEF_USER].val;
- break;
- }
+ if (sym->visible != no && sym_has_value(sym)) {
+ newval.val = sym->def[S_DEF_USER].val;
+ break;
}
prop = sym_get_default_prop(sym);
if (prop) {
@@ -452,7 +452,7 @@ void sym_calc_value(struct symbol *sym)
}
}
- if (sym->flags & SYMBOL_AUTO)
+ if (sym->flags & SYMBOL_NO_WRITE)
sym->flags &= ~SYMBOL_WRITE;
if (sym->flags & SYMBOL_NEED_SET_CHOICE_VALUES)
@@ -484,6 +484,8 @@ bool sym_tristate_within_range(struct symbol *sym, tristate val)
return false;
if (sym->visible <= sym->rev_dep.tri)
return false;
+ if (sym->implied.tri == yes && val == mod)
+ return false;
if (sym_is_choice_value(sym) && sym->visible == yes)
return val == yes;
return val >= sym->rev_dep.tri && val <= sym->visible;
@@ -736,6 +738,10 @@ const char *sym_get_string_default(struct symbol *sym)
if (sym->type == S_BOOLEAN && val == mod)
val = yes;
+ /* adjust the default value if this symbol is implied by another */
+ if (val < sym->implied.tri)
+ val = sym->implied.tri;
+
switch (sym->type) {
case S_BOOLEAN:
case S_TRISTATE:
@@ -749,7 +755,6 @@ const char *sym_get_string_default(struct symbol *sym)
return str;
case S_STRING:
return str;
- case S_OTHER:
case S_UNKNOWN:
break;
}
@@ -780,7 +785,7 @@ const char *sym_get_string_value(struct symbol *sym)
return (const char *)sym->curr.val;
}
-bool sym_is_changable(struct symbol *sym)
+bool sym_is_changeable(struct symbol *sym)
{
return sym->visible > sym->rev_dep.tri;
}
@@ -817,7 +822,7 @@ struct symbol *sym_lookup(const char *name, int flags)
: !(symbol->flags & (SYMBOL_CONST|SYMBOL_CHOICE))))
return symbol;
}
- new_name = strdup(name);
+ new_name = xstrdup(name);
} else {
new_name = NULL;
hash = 0;
@@ -862,55 +867,6 @@ struct symbol *sym_find(const char *name)
return symbol;
}
-/*
- * Expand symbol's names embedded in the string given in argument. Symbols'
- * name to be expanded shall be prefixed by a '$'. Unknown symbol expands to
- * the empty string.
- */
-const char *sym_expand_string_value(const char *in)
-{
- const char *src;
- char *res;
- size_t reslen;
-
- reslen = strlen(in) + 1;
- res = xmalloc(reslen);
- res[0] = '\0';
-
- while ((src = strchr(in, '$'))) {
- char *p, name[SYMBOL_MAXLENGTH];
- const char *symval = "";
- struct symbol *sym;
- size_t newlen;
-
- strncat(res, in, src - in);
- src++;
-
- p = name;
- while (isalnum(*src) || *src == '_')
- *p++ = *src++;
- *p = '\0';
-
- sym = sym_find(name);
- if (sym != NULL) {
- sym_calc_value(sym);
- symval = sym_get_string_value(sym);
- }
-
- newlen = strlen(res) + strlen(symval) + strlen(src) + 1;
- if (newlen > reslen) {
- reslen = newlen;
- res = realloc(res, reslen);
- }
-
- strcat(res, symval);
- in = src;
- }
- strcat(res, in);
-
- return res;
-}
-
const char *sym_escape_string_value(const char *in)
{
const char *p;
@@ -1027,7 +983,7 @@ struct symbol **sym_re_search(const char *pattern)
}
if (sym_match_arr) {
qsort(sym_match_arr, cnt, sizeof(struct sym_match), sym_rel_comp);
- sym_arr = malloc((cnt+1) * sizeof(struct symbol));
+ sym_arr = malloc((cnt+1) * sizeof(struct symbol *));
if (!sym_arr)
goto sym_re_search_free;
for (i = 0; i < cnt; i++)
@@ -1052,7 +1008,7 @@ static struct dep_stack {
struct dep_stack *prev, *next;
struct symbol *sym;
struct property *prop;
- struct expr *expr;
+ struct expr **expr;
} *check_top;
static void dep_stack_insert(struct dep_stack *stack, struct symbol *sym)
@@ -1116,35 +1072,52 @@ static void sym_check_print_recursive(struct symbol *last_sym)
if (stack->sym == last_sym)
fprintf(stderr, "%s:%d:error: recursive dependency detected!\n",
prop->file->name, prop->lineno);
- if (stack->expr) {
- fprintf(stderr, "%s:%d:\tsymbol %s %s value contains %s\n",
- prop->file->name, prop->lineno,
+
+ if (sym_is_choice(sym)) {
+ fprintf(stderr, "%s:%d:\tchoice %s contains symbol %s\n",
+ menu->file->name, menu->lineno,
+ sym->name ? sym->name : "<choice>",
+ next_sym->name ? next_sym->name : "<choice>");
+ } else if (sym_is_choice_value(sym)) {
+ fprintf(stderr, "%s:%d:\tsymbol %s is part of choice %s\n",
+ menu->file->name, menu->lineno,
sym->name ? sym->name : "<choice>",
- prop_get_type_name(prop->type),
next_sym->name ? next_sym->name : "<choice>");
- } else if (stack->prop) {
+ } else if (stack->expr == &sym->dir_dep.expr) {
fprintf(stderr, "%s:%d:\tsymbol %s depends on %s\n",
prop->file->name, prop->lineno,
sym->name ? sym->name : "<choice>",
next_sym->name ? next_sym->name : "<choice>");
- } else if (sym_is_choice(sym)) {
- fprintf(stderr, "%s:%d:\tchoice %s contains symbol %s\n",
- menu->file->name, menu->lineno,
+ } else if (stack->expr == &sym->rev_dep.expr) {
+ fprintf(stderr, "%s:%d:\tsymbol %s is selected by %s\n",
+ prop->file->name, prop->lineno,
sym->name ? sym->name : "<choice>",
next_sym->name ? next_sym->name : "<choice>");
- } else if (sym_is_choice_value(sym)) {
- fprintf(stderr, "%s:%d:\tsymbol %s is part of choice %s\n",
- menu->file->name, menu->lineno,
+ } else if (stack->expr == &sym->implied.expr) {
+ fprintf(stderr, "%s:%d:\tsymbol %s is implied by %s\n",
+ prop->file->name, prop->lineno,
sym->name ? sym->name : "<choice>",
next_sym->name ? next_sym->name : "<choice>");
+ } else if (stack->expr) {
+ fprintf(stderr, "%s:%d:\tsymbol %s %s value contains %s\n",
+ prop->file->name, prop->lineno,
+ sym->name ? sym->name : "<choice>",
+ prop_get_type_name(prop->type),
+ next_sym->name ? next_sym->name : "<choice>");
} else {
- fprintf(stderr, "%s:%d:\tsymbol %s is selected by %s\n",
+ fprintf(stderr, "%s:%d:\tsymbol %s %s is visible depending on %s\n",
prop->file->name, prop->lineno,
sym->name ? sym->name : "<choice>",
+ prop_get_type_name(prop->type),
next_sym->name ? next_sym->name : "<choice>");
}
}
+ fprintf(stderr,
+ "For a resolution refer to Documentation/kbuild/kconfig-language.rst\n"
+ "subsection \"Kconfig recursive dependency limitations\"\n"
+ "\n");
+
if (check_top == &cv_stack)
dep_stack_remove();
}
@@ -1179,7 +1152,7 @@ static struct symbol *sym_check_expr_deps(struct expr *e)
default:
break;
}
- printf("Oops! How to check %d?\n", e->type);
+ fprintf(stderr, "Oops! How to check %d?\n", e->type);
return NULL;
}
@@ -1192,12 +1165,26 @@ static struct symbol *sym_check_sym_deps(struct symbol *sym)
dep_stack_insert(&stack, sym);
+ stack.expr = &sym->dir_dep.expr;
+ sym2 = sym_check_expr_deps(sym->dir_dep.expr);
+ if (sym2)
+ goto out;
+
+ stack.expr = &sym->rev_dep.expr;
sym2 = sym_check_expr_deps(sym->rev_dep.expr);
if (sym2)
goto out;
+ stack.expr = &sym->implied.expr;
+ sym2 = sym_check_expr_deps(sym->implied.expr);
+ if (sym2)
+ goto out;
+
+ stack.expr = NULL;
+
for (prop = sym->prop; prop; prop = prop->next) {
- if (prop->type == P_CHOICE || prop->type == P_SELECT)
+ if (prop->type == P_CHOICE || prop->type == P_SELECT ||
+ prop->type == P_IMPLY)
continue;
stack.prop = prop;
sym2 = sym_check_expr_deps(prop->visible.expr);
@@ -1205,7 +1192,7 @@ static struct symbol *sym_check_sym_deps(struct symbol *sym)
break;
if (prop->type != P_DEFAULT || sym_is_choice(sym))
continue;
- stack.expr = prop->expr;
+ stack.expr = &prop->expr;
sym2 = sym_check_expr_deps(prop->expr);
if (sym2)
break;
@@ -1283,9 +1270,6 @@ struct symbol *sym_check_deps(struct symbol *sym)
sym->flags &= ~SYMBOL_CHECK;
}
- if (sym2 && sym2 == sym)
- sym2 = NULL;
-
return sym2;
}
@@ -1324,8 +1308,6 @@ const char *prop_get_type_name(enum prop_type type)
switch (type) {
case P_PROMPT:
return "prompt";
- case P_ENV:
- return "env";
case P_COMMENT:
return "comment";
case P_MENU:
@@ -1336,6 +1318,8 @@ const char *prop_get_type_name(enum prop_type type)
return "choice";
case P_SELECT:
return "select";
+ case P_IMPLY:
+ return "imply";
case P_RANGE:
return "range";
case P_SYMBOL:
@@ -1345,32 +1329,3 @@ const char *prop_get_type_name(enum prop_type type)
}
return "unknown";
}
-
-static void prop_add_env(const char *env)
-{
- struct symbol *sym, *sym2;
- struct property *prop;
- char *p;
-
- sym = current_entry->sym;
- sym->flags |= SYMBOL_AUTO;
- for_all_properties(sym, prop, P_ENV) {
- sym2 = prop_get_symbol(prop);
- if (strcmp(sym2->name, env))
- menu_warn(current_entry, "redefining environment symbol from %s",
- sym2->name);
- return;
- }
-
- prop = prop_alloc(P_ENV, sym);
- prop->expr = expr_alloc_symbol(sym_lookup(env, SYMBOL_CONST));
-
- sym_env_list = expr_alloc_one(E_LIST, sym_env_list);
- sym_env_list->right.sym = sym;
-
- p = getenv(env);
- if (p)
- sym_add_default(sym, p);
- else
- menu_warn(current_entry, "environment variable %s undefined", env);
-}
new file mode 100644
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config A
+ bool "A"
+ default y
+
+config A0
+ bool "A0"
+ depends on A
+ default y
+ help
+ This depends on A, so should be a submenu of A.
+
+config A0_0
+ bool "A1_0"
+ depends on A0
+ help
+ Submenus are created recursively.
+ This should be a submenu of A0.
+
+config A1
+ bool "A1"
+ depends on A
+ default y
+ help
+ This should line up with A0.
+
+choice
+ prompt "choice"
+ depends on A1
+ help
+ Choice should become a submenu as well.
+
+config A1_0
+ bool "A1_0"
+
+config A1_1
+ bool "A1_1"
+
+endchoice
+
+config B
+ bool "B"
+ help
+ This is independent of A.
+
+config C
+ bool "C"
+ depends on A
+ help
+ This depends on A, but not a consecutive item, so can/should not
+ be a submenu.
new file mode 100644
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Create submenu for symbols that depend on the preceding one.
+
+If a symbols has dependency on the preceding symbol, the menu entry
+should become the submenu of the preceding one, and displayed with
+deeper indentation.
+"""
+
+
+def test(conf):
+ assert conf.oldaskconfig() == 0
+ assert conf.stdout_contains('expected_stdout')
new file mode 100644
@@ -0,0 +1,10 @@
+A (A) [Y/n/?] (NEW)
+ A0 (A0) [Y/n/?] (NEW)
+ A1_0 (A0_0) [N/y/?] (NEW)
+ A1 (A1) [Y/n/?] (NEW)
+ choice
+ > 1. A1_0 (A1_0) (NEW)
+ 2. A1_1 (A1_1) (NEW)
+ choice[1-2?]:
+B (B) [N/y/?] (NEW)
+C (C) [N/y/?] (NEW)
new file mode 100644
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config MODULES
+ bool "Enable loadable module support"
+ option modules
+ default y
+
+choice
+ prompt "boolean choice"
+ default BOOL_CHOICE1
+
+config BOOL_CHOICE0
+ bool "choice 0"
+
+config BOOL_CHOICE1
+ bool "choice 1"
+
+endchoice
+
+choice
+ prompt "optional boolean choice"
+ optional
+ default OPT_BOOL_CHOICE1
+
+config OPT_BOOL_CHOICE0
+ bool "choice 0"
+
+config OPT_BOOL_CHOICE1
+ bool "choice 1"
+
+endchoice
+
+choice
+ prompt "tristate choice"
+ default TRI_CHOICE1
+
+config TRI_CHOICE0
+ tristate "choice 0"
+
+config TRI_CHOICE1
+ tristate "choice 1"
+
+endchoice
+
+choice
+ prompt "optional tristate choice"
+ optional
+ default OPT_TRI_CHOICE1
+
+config OPT_TRI_CHOICE0
+ tristate "choice 0"
+
+config OPT_TRI_CHOICE1
+ tristate "choice 1"
+
+endchoice
new file mode 100644
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Basic choice tests.
+
+The handling of 'choice' is a bit complicated part in Kconfig.
+
+The behavior of 'y' choice is intuitive. If choice values are tristate,
+the choice can be 'm' where each value can be enabled independently.
+Also, if a choice is marked as 'optional', the whole choice can be
+invisible.
+"""
+
+
+def test_oldask0(conf):
+ assert conf.oldaskconfig() == 0
+ assert conf.stdout_contains('oldask0_expected_stdout')
+
+
+def test_oldask1(conf):
+ assert conf.oldaskconfig('oldask1_config') == 0
+ assert conf.stdout_contains('oldask1_expected_stdout')
+
+
+def test_allyes(conf):
+ assert conf.allyesconfig() == 0
+ assert conf.config_contains('allyes_expected_config')
+
+
+def test_allmod(conf):
+ assert conf.allmodconfig() == 0
+ assert conf.config_contains('allmod_expected_config')
+
+
+def test_allno(conf):
+ assert conf.allnoconfig() == 0
+ assert conf.config_contains('allno_expected_config')
+
+
+def test_alldef(conf):
+ assert conf.alldefconfig() == 0
+ assert conf.config_contains('alldef_expected_config')
new file mode 100644
@@ -0,0 +1,5 @@
+CONFIG_MODULES=y
+# CONFIG_BOOL_CHOICE0 is not set
+CONFIG_BOOL_CHOICE1=y
+# CONFIG_TRI_CHOICE0 is not set
+# CONFIG_TRI_CHOICE1 is not set
new file mode 100644
@@ -0,0 +1,9 @@
+CONFIG_MODULES=y
+# CONFIG_BOOL_CHOICE0 is not set
+CONFIG_BOOL_CHOICE1=y
+# CONFIG_OPT_BOOL_CHOICE0 is not set
+CONFIG_OPT_BOOL_CHOICE1=y
+CONFIG_TRI_CHOICE0=m
+CONFIG_TRI_CHOICE1=m
+CONFIG_OPT_TRI_CHOICE0=m
+CONFIG_OPT_TRI_CHOICE1=m
new file mode 100644
@@ -0,0 +1,5 @@
+# CONFIG_MODULES is not set
+# CONFIG_BOOL_CHOICE0 is not set
+CONFIG_BOOL_CHOICE1=y
+# CONFIG_TRI_CHOICE0 is not set
+CONFIG_TRI_CHOICE1=y
new file mode 100644
@@ -0,0 +1,9 @@
+CONFIG_MODULES=y
+# CONFIG_BOOL_CHOICE0 is not set
+CONFIG_BOOL_CHOICE1=y
+# CONFIG_OPT_BOOL_CHOICE0 is not set
+CONFIG_OPT_BOOL_CHOICE1=y
+# CONFIG_TRI_CHOICE0 is not set
+CONFIG_TRI_CHOICE1=y
+# CONFIG_OPT_TRI_CHOICE0 is not set
+CONFIG_OPT_TRI_CHOICE1=y
new file mode 100644
@@ -0,0 +1,10 @@
+Enable loadable module support (MODULES) [Y/n/?] (NEW)
+boolean choice
+ 1. choice 0 (BOOL_CHOICE0) (NEW)
+> 2. choice 1 (BOOL_CHOICE1) (NEW)
+choice[1-2?]:
+optional boolean choice [N/y/?] (NEW)
+tristate choice [M/y/?] (NEW)
+ choice 0 (TRI_CHOICE0) [N/m/?] (NEW)
+ choice 1 (TRI_CHOICE1) [N/m/?] (NEW)
+optional tristate choice [N/m/y/?] (NEW)
new file mode 100644
@@ -0,0 +1,2 @@
+# CONFIG_MODULES is not set
+CONFIG_OPT_BOOL_CHOICE0=y
new file mode 100644
@@ -0,0 +1,15 @@
+Enable loadable module support (MODULES) [N/y/?]
+boolean choice
+ 1. choice 0 (BOOL_CHOICE0) (NEW)
+> 2. choice 1 (BOOL_CHOICE1) (NEW)
+choice[1-2?]:
+optional boolean choice [Y/n/?] (NEW)
+optional boolean choice
+> 1. choice 0 (OPT_BOOL_CHOICE0)
+ 2. choice 1 (OPT_BOOL_CHOICE1) (NEW)
+choice[1-2?]:
+tristate choice
+ 1. choice 0 (TRI_CHOICE0) (NEW)
+> 2. choice 1 (TRI_CHOICE1) (NEW)
+choice[1-2?]:
+optional tristate choice [N/y/?]
new file mode 100644
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config MODULES
+ def_bool y
+ option modules
+
+config DEP
+ tristate
+ default m
+
+choice
+ prompt "Tristate Choice"
+
+config CHOICE0
+ tristate "Choice 0"
+
+config CHOICE1
+ tristate "Choice 1"
+ depends on DEP
+
+endchoice
new file mode 100644
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Hide tristate choice values with mod dependency in y choice.
+
+If tristate choice values depend on symbols set to 'm', they should be
+hidden when the choice containing them is changed from 'm' to 'y'
+(i.e. exclusive choice).
+
+Related Linux commit: fa64e5f6a35efd5e77d639125d973077ca506074
+"""
+
+
+def test(conf):
+ assert conf.oldaskconfig('config', 'y') == 0
+ assert conf.config_contains('expected_config')
+ assert conf.stdout_contains('expected_stdout')
new file mode 100644
@@ -0,0 +1,2 @@
+CONFIG_CHOICE0=m
+CONFIG_CHOICE1=m
new file mode 100644
@@ -0,0 +1,3 @@
+CONFIG_MODULES=y
+CONFIG_DEP=m
+CONFIG_CHOICE0=y
new file mode 100644
@@ -0,0 +1,4 @@
+Tristate Choice [M/y/?] y
+Tristate Choice
+> 1. Choice 0 (CHOICE0)
+choice[1]: 1
new file mode 100644
@@ -0,0 +1,291 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2018 Masahiro Yamada <yamada.masahiro@socionext.com>
+#
+
+"""
+Kconfig unit testing framework.
+
+This provides fixture functions commonly used from test files.
+"""
+
+import os
+import pytest
+import shutil
+import subprocess
+import tempfile
+
+CONF_PATH = os.path.abspath(os.path.join('scripts', 'kconfig', 'conf'))
+
+
+class Conf:
+ """Kconfig runner and result checker.
+
+ This class provides methods to run text-based interface of Kconfig
+ (scripts/kconfig/conf) and retrieve the resulted configuration,
+ stdout, and stderr. It also provides methods to compare those
+ results with expectations.
+ """
+
+ def __init__(self, request):
+ """Create a new Conf instance.
+
+ request: object to introspect the requesting test module
+ """
+ # the directory of the test being run
+ self._test_dir = os.path.dirname(str(request.fspath))
+
+ # runners
+ def _run_conf(self, mode, dot_config=None, out_file='.config',
+ interactive=False, in_keys=None, extra_env={}):
+ """Run text-based Kconfig executable and save the result.
+
+ mode: input mode option (--oldaskconfig, --defconfig=<file> etc.)
+ dot_config: .config file to use for configuration base
+ out_file: file name to contain the output config data
+ interactive: flag to specify the interactive mode
+ in_keys: key inputs for interactive modes
+ extra_env: additional environments
+ returncode: exit status of the Kconfig executable
+ """
+ command = [CONF_PATH, mode, 'Kconfig']
+
+ # Override 'srctree' environment to make the test as the top directory
+ extra_env['srctree'] = self._test_dir
+
+ # Run Kconfig in a temporary directory.
+ # This directory is automatically removed when done.
+ with tempfile.TemporaryDirectory() as temp_dir:
+
+ # if .config is given, copy it to the working directory
+ if dot_config:
+ shutil.copyfile(os.path.join(self._test_dir, dot_config),
+ os.path.join(temp_dir, '.config'))
+
+ ps = subprocess.Popen(command,
+ stdin=subprocess.PIPE,
+ stdout=subprocess.PIPE,
+ stderr=subprocess.PIPE,
+ cwd=temp_dir,
+ env=dict(os.environ, **extra_env))
+
+ # If input key sequence is given, feed it to stdin.
+ if in_keys:
+ ps.stdin.write(in_keys.encode('utf-8'))
+
+ while ps.poll() is None:
+ # For interactive modes such as oldaskconfig, oldconfig,
+ # send 'Enter' key until the program finishes.
+ if interactive:
+ ps.stdin.write(b'\n')
+
+ self.retcode = ps.returncode
+ self.stdout = ps.stdout.read().decode()
+ self.stderr = ps.stderr.read().decode()
+
+ # Retrieve the resulted config data only when .config is supposed
+ # to exist. If the command fails, the .config does not exist.
+ # 'listnewconfig' does not produce .config in the first place.
+ if self.retcode == 0 and out_file:
+ with open(os.path.join(temp_dir, out_file)) as f:
+ self.config = f.read()
+ else:
+ self.config = None
+
+ # Logging:
+ # Pytest captures the following information by default. In failure
+ # of tests, the captured log will be displayed. This will be useful to
+ # figure out what has happened.
+
+ print("[command]\n{}\n".format(' '.join(command)))
+
+ print("[retcode]\n{}\n".format(self.retcode))
+
+ print("[stdout]")
+ print(self.stdout)
+
+ print("[stderr]")
+ print(self.stderr)
+
+ if self.config is not None:
+ print("[output for '{}']".format(out_file))
+ print(self.config)
+
+ return self.retcode
+
+ def oldaskconfig(self, dot_config=None, in_keys=None):
+ """Run oldaskconfig.
+
+ dot_config: .config file to use for configuration base (optional)
+ in_key: key inputs (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._run_conf('--oldaskconfig', dot_config=dot_config,
+ interactive=True, in_keys=in_keys)
+
+ def oldconfig(self, dot_config=None, in_keys=None):
+ """Run oldconfig.
+
+ dot_config: .config file to use for configuration base (optional)
+ in_key: key inputs (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._run_conf('--oldconfig', dot_config=dot_config,
+ interactive=True, in_keys=in_keys)
+
+ def olddefconfig(self, dot_config=None):
+ """Run olddefconfig.
+
+ dot_config: .config file to use for configuration base (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._run_conf('--olddefconfig', dot_config=dot_config)
+
+ def defconfig(self, defconfig):
+ """Run defconfig.
+
+ defconfig: defconfig file for input
+ returncode: exit status of the Kconfig executable
+ """
+ defconfig_path = os.path.join(self._test_dir, defconfig)
+ return self._run_conf('--defconfig={}'.format(defconfig_path))
+
+ def _allconfig(self, mode, all_config):
+ if all_config:
+ all_config_path = os.path.join(self._test_dir, all_config)
+ extra_env = {'KCONFIG_ALLCONFIG': all_config_path}
+ else:
+ extra_env = {}
+
+ return self._run_conf('--{}config'.format(mode), extra_env=extra_env)
+
+ def allyesconfig(self, all_config=None):
+ """Run allyesconfig.
+
+ all_config: fragment config file for KCONFIG_ALLCONFIG (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._allconfig('allyes', all_config)
+
+ def allmodconfig(self, all_config=None):
+ """Run allmodconfig.
+
+ all_config: fragment config file for KCONFIG_ALLCONFIG (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._allconfig('allmod', all_config)
+
+ def allnoconfig(self, all_config=None):
+ """Run allnoconfig.
+
+ all_config: fragment config file for KCONFIG_ALLCONFIG (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._allconfig('allno', all_config)
+
+ def alldefconfig(self, all_config=None):
+ """Run alldefconfig.
+
+ all_config: fragment config file for KCONFIG_ALLCONFIG (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._allconfig('alldef', all_config)
+
+ def randconfig(self, all_config=None):
+ """Run randconfig.
+
+ all_config: fragment config file for KCONFIG_ALLCONFIG (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._allconfig('rand', all_config)
+
+ def savedefconfig(self, dot_config):
+ """Run savedefconfig.
+
+ dot_config: .config file for input
+ returncode: exit status of the Kconfig executable
+ """
+ return self._run_conf('--savedefconfig', out_file='defconfig')
+
+ def listnewconfig(self, dot_config=None):
+ """Run listnewconfig.
+
+ dot_config: .config file to use for configuration base (optional)
+ returncode: exit status of the Kconfig executable
+ """
+ return self._run_conf('--listnewconfig', dot_config=dot_config,
+ out_file=None)
+
+ # checkers
+ def _read_and_compare(self, compare, expected):
+ """Compare the result with expectation.
+
+ compare: function to compare the result with expectation
+ expected: file that contains the expected data
+ """
+ with open(os.path.join(self._test_dir, expected)) as f:
+ expected_data = f.read()
+ return compare(self, expected_data)
+
+ def _contains(self, attr, expected):
+ return self._read_and_compare(
+ lambda s, e: getattr(s, attr).find(e) >= 0,
+ expected)
+
+ def _matches(self, attr, expected):
+ return self._read_and_compare(lambda s, e: getattr(s, attr) == e,
+ expected)
+
+ def config_contains(self, expected):
+ """Check if resulted configuration contains expected data.
+
+ expected: file that contains the expected data
+ returncode: True if result contains the expected data, False otherwise
+ """
+ return self._contains('config', expected)
+
+ def config_matches(self, expected):
+ """Check if resulted configuration exactly matches expected data.
+
+ expected: file that contains the expected data
+ returncode: True if result matches the expected data, False otherwise
+ """
+ return self._matches('config', expected)
+
+ def stdout_contains(self, expected):
+ """Check if resulted stdout contains expected data.
+
+ expected: file that contains the expected data
+ returncode: True if result contains the expected data, False otherwise
+ """
+ return self._contains('stdout', expected)
+
+ def stdout_matches(self, expected):
+ """Check if resulted stdout exactly matches expected data.
+
+ expected: file that contains the expected data
+ returncode: True if result matches the expected data, False otherwise
+ """
+ return self._matches('stdout', expected)
+
+ def stderr_contains(self, expected):
+ """Check if resulted stderr contains expected data.
+
+ expected: file that contains the expected data
+ returncode: True if result contains the expected data, False otherwise
+ """
+ return self._contains('stderr', expected)
+
+ def stderr_matches(self, expected):
+ """Check if resulted stderr exactly matches expected data.
+
+ expected: file that contains the expected data
+ returncode: True if result matches the expected data, False otherwise
+ """
+ return self._matches('stderr', expected)
+
+
+@pytest.fixture(scope="module")
+def conf(request):
+ """Create a Conf instance and provide it to test functions."""
+ return Conf(request)
new file mode 100644
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# depends on itself
+
+config A
+ bool "A"
+ depends on A
+
+# select itself
+
+config B
+ bool
+ select B
+
+# depends on each other
+
+config C1
+ bool "C1"
+ depends on C2
+
+config C2
+ bool "C2"
+ depends on C1
+
+# depends on and select
+
+config D1
+ bool "D1"
+ depends on D2
+ select D2
+
+config D2
+ bool
+
+# depends on and imply
+
+config E1
+ bool "E1"
+ depends on E2
+ imply E2
+
+config E2
+ bool "E2"
+
+# property
+
+config F1
+ bool "F1"
+ default F2
+
+config F2
+ bool "F2"
+ depends on F1
+
+# menu
+
+menu "menu depending on its content"
+ depends on G
+
+config G
+ bool "G"
+
+endmenu
new file mode 100644
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Detect recursive dependency error.
+
+Recursive dependency should be treated as an error.
+"""
+
+def test(conf):
+ assert conf.oldaskconfig() == 1
+ assert conf.stderr_contains('expected_stderr')
new file mode 100644
@@ -0,0 +1,38 @@
+Kconfig:11:error: recursive dependency detected!
+Kconfig:11: symbol B is selected by B
+For a resolution refer to Documentation/kbuild/kconfig-language.rst
+subsection "Kconfig recursive dependency limitations"
+
+Kconfig:5:error: recursive dependency detected!
+Kconfig:5: symbol A depends on A
+For a resolution refer to Documentation/kbuild/kconfig-language.rst
+subsection "Kconfig recursive dependency limitations"
+
+Kconfig:17:error: recursive dependency detected!
+Kconfig:17: symbol C1 depends on C2
+Kconfig:21: symbol C2 depends on C1
+For a resolution refer to Documentation/kbuild/kconfig-language.rst
+subsection "Kconfig recursive dependency limitations"
+
+Kconfig:32:error: recursive dependency detected!
+Kconfig:32: symbol D2 is selected by D1
+Kconfig:27: symbol D1 depends on D2
+For a resolution refer to Documentation/kbuild/kconfig-language.rst
+subsection "Kconfig recursive dependency limitations"
+
+Kconfig:37:error: recursive dependency detected!
+Kconfig:37: symbol E1 depends on E2
+Kconfig:42: symbol E2 is implied by E1
+For a resolution refer to Documentation/kbuild/kconfig-language.rst
+subsection "Kconfig recursive dependency limitations"
+
+Kconfig:60:error: recursive dependency detected!
+Kconfig:60: symbol G depends on G
+For a resolution refer to Documentation/kbuild/kconfig-language.rst
+subsection "Kconfig recursive dependency limitations"
+
+Kconfig:51:error: recursive dependency detected!
+Kconfig:51: symbol F2 depends on F1
+Kconfig:49: symbol F1 default value contains F2
+For a resolution refer to Documentation/kbuild/kconfig-language.rst
+subsection "Kconfig recursive dependency limitations"
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+source "Kconfig.inc1"
new file mode 100644
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+
+
+source "Kconfig.inc2"
new file mode 100644
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+
+source "Kconfig.inc3"
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+source "Kconfig.inc1"
new file mode 100644
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Detect recursive inclusion error.
+
+If recursive inclusion is detected, it should fail with error messages.
+"""
+
+
+def test(conf):
+ assert conf.oldaskconfig() != 0
+ assert conf.stderr_contains('expected_stderr')
new file mode 100644
@@ -0,0 +1,6 @@
+Recursive inclusion detected.
+Inclusion path:
+ current file : Kconfig.inc1
+ included from: Kconfig.inc3:2
+ included from: Kconfig.inc2:4
+ included from: Kconfig.inc1:5
new file mode 100644
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config MODULES
+ def_bool y
+ option modules
+
+choice
+ prompt "Choice"
+
+config CHOICE_VAL0
+ tristate "Choice 0"
+
+config CHOIVE_VAL1
+ tristate "Choice 1"
+
+endchoice
+
+choice
+ prompt "Another choice"
+ depends on CHOICE_VAL0
+
+config DUMMY
+ bool "dummy"
+
+endchoice
new file mode 100644
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Do not affect user-assigned choice value by another choice.
+
+Handling of state flags for choices is complecated. In old days,
+the defconfig result of a choice could be affected by another choice
+if those choices interact by 'depends on', 'select', etc.
+
+Related Linux commit: fbe98bb9ed3dae23e320c6b113e35f129538d14a
+"""
+
+
+def test(conf):
+ assert conf.defconfig('defconfig') == 0
+ assert conf.config_contains('expected_config')
new file mode 100644
@@ -0,0 +1 @@
+CONFIG_CHOICE_VAL0=y
new file mode 100644
@@ -0,0 +1,4 @@
+CONFIG_MODULES=y
+CONFIG_CHOICE_VAL0=y
+# CONFIG_CHOIVE_VAL1 is not set
+CONFIG_DUMMY=y
new file mode 100644
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config A
+ bool "A"
+ help
+ This is a new symbol.
+
+choice
+ prompt "Choice ?"
+ depends on A
+ help
+ "depends on A" has been newly added.
+
+config CHOICE_B
+ bool "Choice B"
+
+config CHOICE_C
+ bool "Choice C"
+ help
+ This is a new symbol, so should be asked.
+
+endchoice
+
+choice
+ prompt "Choice2 ?"
+
+config CHOICE_D
+ bool "Choice D"
+
+config CHOICE_E
+ bool "Choice E"
+
+config CHOICE_F
+ bool "Choice F"
+ depends on A
+ help
+ This is a new symbol, so should be asked.
+
+endchoice
new file mode 100644
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Ask new choice values when they become visible.
+
+If new choice values are added with new dependency, and they become
+visible during user configuration, oldconfig should recognize them
+as (NEW), and ask the user for choice.
+
+Related Linux commit: 5d09598d488f081e3be23f885ed65cbbe2d073b5
+"""
+
+
+def test(conf):
+ assert conf.oldconfig('config', 'y') == 0
+ assert conf.stdout_contains('expected_stdout')
new file mode 100644
@@ -0,0 +1,3 @@
+CONFIG_CHOICE_B=y
+# CONFIG_CHOICE_D is not set
+CONFIG_CHOICE_E=y
new file mode 100644
@@ -0,0 +1,10 @@
+A (A) [N/y/?] (NEW) y
+ Choice ?
+ > 1. Choice B (CHOICE_B)
+ 2. Choice C (CHOICE_C) (NEW)
+ choice[1-2?]:
+Choice2 ?
+ 1. Choice D (CHOICE_D)
+> 2. Choice E (CHOICE_E)
+ 3. Choice F (CHOICE_F) (NEW)
+choice[1-3?]:
new file mode 100644
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config A
+ bool "A"
+
+choice
+ prompt "Choice ?"
+ depends on A
+
+config CHOICE_B
+ bool "Choice B"
+
+config CHOICE_C
+ bool "Choice C"
+
+endchoice
new file mode 100644
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Do not write choice values to .config if the dependency is unmet.
+
+"# CONFIG_... is not set" should not be written into the .config file
+for symbols with unmet dependency.
+
+This was not working correctly for choice values because choice needs
+a bit different symbol computation.
+
+This checks that no unneeded "# COFIG_... is not set" is contained in
+the .config file.
+
+Related Linux commit: cb67ab2cd2b8abd9650292c986c79901e3073a59
+"""
+
+
+def test(conf):
+ assert conf.oldaskconfig('config', 'n') == 0
+ assert conf.config_matches('expected_config')
new file mode 100644
@@ -0,0 +1 @@
+CONFIG_A=y
new file mode 100644
@@ -0,0 +1,5 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Main menu
+#
+# CONFIG_A is not set
new file mode 100644
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# 'info' prints the argument to stdout.
+$(info,hello world 0)
+
+# 'warning-if', if the first argument is y, sends the second argument to stderr,
+# and the message is prefixed with the current file name and line number.
+$(warning-if,y,hello world 1)
+
+# 'error-if' is similar, but it terminates the parsing immediately.
+# The following is just no-op since the first argument is not y.
+$(error-if,n,this should not be printed)
+
+# Shorthand
+warning = $(warning-if,y,$(1))
+
+# 'shell' executes a command, and returns its stdout.
+$(warning,$(shell,echo hello world 3))
+
+# Every newline in the output is replaced with a space,
+# but any trailing newlines are deleted.
+$(warning,$(shell,printf 'hello\nworld\n\n4\n\n\n'))
+
+# 'filename' is expanded to the currently parsed file name,
+# 'lineno' to the line number.
+$(warning,filename=$(filename))
+$(warning,lineno=$(lineno))
new file mode 100644
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Built-in function tests.
+"""
+
+def test(conf):
+ assert conf.oldaskconfig() == 0
+ assert conf.stdout_contains('expected_stdout')
+ assert conf.stderr_matches('expected_stderr')
new file mode 100644
@@ -0,0 +1,5 @@
+Kconfig:8: hello world 1
+Kconfig:18: hello world 3
+Kconfig:22: hello world 4
+Kconfig:26: filename=Kconfig
+Kconfig:27: lineno=27
new file mode 100644
@@ -0,0 +1 @@
+hello world 0
new file mode 100644
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+X = $(Y)
+Y = $(X)
+$(info $(X))
new file mode 100644
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Detect circular variable expansion.
+
+If a recursively expanded variable references itself (eventually),
+it should fail with an error message.
+"""
+
+def test(conf):
+ assert conf.oldaskconfig() != 0
+ assert conf.stderr_matches('expected_stderr')
new file mode 100644
@@ -0,0 +1 @@
+Kconfig:5: Recursive variable 'X' references itself (eventually)
new file mode 100644
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Shorthand
+warning = $(warning-if,y,$(1))
+
+# You can not pass commas directly to a function since they are treated as
+# delimiters. You can use the following trick to do so.
+comma := ,
+$(warning,hello$(comma) world)
+
+# Like Make, single quotes, double quotes, spaces are treated verbatim.
+# The following prints the text as-is.
+$(warning, ' " '" ' ''' "'")
+
+# Unlike Make, '$' has special meaning only when it is followed by '('.
+# No need to escape '$' itself.
+$(warning,$)
+$(warning,$$)
+$ := 1
+$(warning,$($))
+
+# You need a trick to escape '$' followed by '('
+# The following should print "$(X)". It should not be expanded further.
+dollar := $
+$(warning,$(dollar)(X))
+
+# You need a trick to treat unbalanced parentheses.
+# The following should print "(".
+left_paren := (
+$(warning,$(left_paren))
+
+# A simple expanded should not be expanded multiple times.
+# The following should print "$(X)". It should not be expanded further.
+Y := $(dollar)(X)
+$(warning,$(Y))
+
+# The following should print "$(X)" as well.
+Y = $(dollar)(X)
+$(warning,$(Y))
+
+# The following should print "$(".
+# It should not be emit "unterminated reference" error.
+unterminated := $(dollar)(
+$(warning,$(unterminated))
new file mode 100644
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Escape sequence tests.
+"""
+
+def test(conf):
+ assert conf.oldaskconfig() == 0
+ assert conf.stderr_matches('expected_stderr')
new file mode 100644
@@ -0,0 +1,10 @@
+Kconfig:9: hello, world
+Kconfig:13: ' " '" ' ''' "'"
+Kconfig:17: $
+Kconfig:18: $$
+Kconfig:20: 1
+Kconfig:25: $(X)
+Kconfig:30: (
+Kconfig:35: $(X)
+Kconfig:39: $(X)
+Kconfig:44: $(
new file mode 100644
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Shorthand
+warning = $(warning-if,y,$(1))
+
+# Simply expanded variable.
+X := 1
+SIMPLE := $(X)
+X := 2
+$(warning,SIMPLE = $(SIMPLE))
+
+# Recursively expanded variable.
+X := 1
+RECURSIVE = $(X)
+X := 2
+$(warning,RECURSIVE = $(RECURSIVE))
+
+# Append something to a simply expanded variable.
+Y := 3
+SIMPLE += $(Y)
+Y := 4
+$(warning,SIMPLE = $(SIMPLE))
+
+# Append something to a recursively expanded variable.
+Y := 3
+RECURSIVE += $(Y)
+Y := 4
+$(warning,RECURSIVE = $(RECURSIVE))
+
+# Use += operator to an undefined variable.
+# This works as a recursively expanded variable.
+Y := 3
+UNDEFINED_VARIABLE += $(Y)
+Y := 4
+$(warning,UNDEFINED_VARIABLE = $(UNDEFINED_VARIABLE))
+
+# You can use variable references for the lefthand side of assignment statement.
+X := A
+Y := B
+$(X)$(Y) := 5
+$(warning,AB = $(AB))
+
+# User-defined function.
+greeting = $(1), my name is $(2).
+$(warning,$(greeting,Hello,John))
+
+# The number of arguments is not checked for user-defined functions.
+# If some arguments are optional, it is useful to pass fewer parameters.
+# $(2) will be blank in this case.
+$(warning,$(greeting,Hello))
+
+# Unreferenced parameters are just ignored.
+$(warning,$(greeting,Hello,John,ignored,ignored))
new file mode 100644
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Variable and user-defined function tests.
+"""
+
+def test(conf):
+ assert conf.oldaskconfig() == 0
+ assert conf.stderr_matches('expected_stderr')
new file mode 100644
@@ -0,0 +1,9 @@
+Kconfig:10: SIMPLE = 1
+Kconfig:16: RECURSIVE = 2
+Kconfig:22: SIMPLE = 1 3
+Kconfig:28: RECURSIVE = 2 4
+Kconfig:35: UNDEFINED_VARIABLE = 4
+Kconfig:41: AB = 5
+Kconfig:45: Hello, my name is John.
+Kconfig:50: Hello, my name is .
+Kconfig:53: Hello, my name is John.
new file mode 100644
@@ -0,0 +1,7 @@
+[pytest]
+addopts = --verbose
+
+# Pytest requires that test files have unique names, because pytest imports
+# them as top-level modules. It is silly to prefix or suffix a test file with
+# the directory name that contains it. Use __init__.py for all test files.
+python_files = __init__.py
new file mode 100644
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+
+choice
+ prompt "choice"
+
+config A
+ bool "A"
+
+config B
+ bool "B"
+
+if B
+choice
+ prompt "sub choice"
+
+config C
+ bool "C"
+
+config D
+ bool "D"
+
+if D
+choice
+ prompt "subsub choice"
+
+config E
+ bool "E"
+
+endchoice
+endif # D
+
+endchoice
+endif # B
+
+endchoice
new file mode 100644
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+"""
+Set random values recursively in nested choices.
+
+Kconfig can create a choice-in-choice structure by using 'if' statement.
+randconfig should correctly set random choice values.
+
+Related Linux commit: 3b9a19e08960e5cdad5253998637653e592a3c29
+"""
+
+
+def test(conf):
+ for i in range(20):
+ assert conf.randconfig() == 0
+ assert (conf.config_contains('expected_stdout0') or
+ conf.config_contains('expected_stdout1') or
+ conf.config_contains('expected_stdout2'))
new file mode 100644
@@ -0,0 +1,2 @@
+CONFIG_A=y
+# CONFIG_B is not set
new file mode 100644
@@ -0,0 +1,4 @@
+# CONFIG_A is not set
+CONFIG_B=y
+CONFIG_C=y
+# CONFIG_D is not set
new file mode 100644
@@ -0,0 +1,5 @@
+# CONFIG_A is not set
+CONFIG_B=y
+# CONFIG_C is not set
+CONFIG_D=y
+CONFIG_E=y
@@ -1,8 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002-2005 Roman Zippel <zippel@linux-m68k.org>
* Copyright (C) 2002-2005 Sam Ravnborg <sam@ravnborg.org>
- *
- * Released under the terms of the GNU GPL v2.0.
*/
#include <stdarg.h>
@@ -14,69 +13,21 @@
struct file *file_lookup(const char *name)
{
struct file *file;
- const char *file_name = sym_expand_string_value(name);
for (file = file_list; file; file = file->next) {
if (!strcmp(name, file->name)) {
- free((void *)file_name);
return file;
}
}
file = xmalloc(sizeof(*file));
memset(file, 0, sizeof(*file));
- file->name = file_name;
+ file->name = xstrdup(name);
file->next = file_list;
file_list = file;
return file;
}
-/* write a dependency file as used by kbuild to track dependencies */
-int file_write_dep(const char *name)
-{
- struct symbol *sym, *env_sym;
- struct expr *e;
- struct file *file;
- FILE *out;
-
- if (!name)
- name = ".kconfig.d";
- out = fopen("..config.tmp", "w");
- if (!out)
- return 1;
- fprintf(out, "deps_config := \\\n");
- for (file = file_list; file; file = file->next) {
- if (file->next)
- fprintf(out, "\t%s \\\n", file->name);
- else
- fprintf(out, "\t%s\n", file->name);
- }
- fprintf(out, "\n%s: \\\n"
- "\t$(deps_config)\n\n", conf_get_autoconfig_name());
-
- expr_list_for_each_sym(sym_env_list, e, sym) {
- struct property *prop;
- const char *value;
-
- prop = sym_get_env_prop(sym);
- env_sym = prop_get_symbol(prop);
- if (!env_sym)
- continue;
- value = getenv(env_sym->name);
- if (!value)
- value = "";
- fprintf(out, "ifneq \"$(%s)\" \"%s\"\n", env_sym->name, value);
- fprintf(out, "%s: FORCE\n", conf_get_autoconfig_name());
- fprintf(out, "endif\n");
- }
-
- fprintf(out, "\n$(deps_config): ;\n");
- fclose(out);
- rename("..config.tmp", name);
- return 0;
-}
-
-
/* Allocate initial growable string */
struct gstr str_new(void)
{
@@ -104,7 +55,7 @@ void str_append(struct gstr *gs, const char *s)
if (s) {
l = strlen(gs->s) + strlen(s) + 1;
if (l > gs->len) {
- gs->s = realloc(gs->s, l);
+ gs->s = xrealloc(gs->s, l);
gs->len = l;
}
strcat(gs->s, s);
@@ -145,3 +96,34 @@ void *xcalloc(size_t nmemb, size_t size)
fprintf(stderr, "Out of memory.\n");
exit(1);
}
+
+void *xrealloc(void *p, size_t size)
+{
+ p = realloc(p, size);
+ if (p)
+ return p;
+ fprintf(stderr, "Out of memory.\n");
+ exit(1);
+}
+
+char *xstrdup(const char *s)
+{
+ char *p;
+
+ p = strdup(s);
+ if (p)
+ return p;
+ fprintf(stderr, "Out of memory.\n");
+ exit(1);
+}
+
+char *xstrndup(const char *s, size_t n)
+{
+ char *p;
+
+ p = strndup(s, n);
+ if (p)
+ return p;
+ fprintf(stderr, "Out of memory.\n");
+ exit(1);
+}
deleted file mode 100644
@@ -1,49 +0,0 @@
-%language=ANSI-C
-%define hash-function-name kconf_id_hash
-%define lookup-function-name kconf_id_lookup
-%define string-pool-name kconf_id_strings
-%compare-strncmp
-%enum
-%pic
-%struct-type
-
-struct kconf_id;
-
-static const struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
-
-%%
-mainmenu, T_MAINMENU, TF_COMMAND
-menu, T_MENU, TF_COMMAND
-endmenu, T_ENDMENU, TF_COMMAND
-source, T_SOURCE, TF_COMMAND
-choice, T_CHOICE, TF_COMMAND
-endchoice, T_ENDCHOICE, TF_COMMAND
-comment, T_COMMENT, TF_COMMAND
-config, T_CONFIG, TF_COMMAND
-menuconfig, T_MENUCONFIG, TF_COMMAND
-help, T_HELP, TF_COMMAND
----help---, T_HELP, TF_COMMAND
-if, T_IF, TF_COMMAND|TF_PARAM
-endif, T_ENDIF, TF_COMMAND
-depends, T_DEPENDS, TF_COMMAND
-optional, T_OPTIONAL, TF_COMMAND
-default, T_DEFAULT, TF_COMMAND, S_UNKNOWN
-prompt, T_PROMPT, TF_COMMAND
-tristate, T_TYPE, TF_COMMAND, S_TRISTATE
-def_tristate, T_DEFAULT, TF_COMMAND, S_TRISTATE
-bool, T_TYPE, TF_COMMAND, S_BOOLEAN
-boolean, T_TYPE, TF_COMMAND, S_BOOLEAN
-def_bool, T_DEFAULT, TF_COMMAND, S_BOOLEAN
-int, T_TYPE, TF_COMMAND, S_INT
-hex, T_TYPE, TF_COMMAND, S_HEX
-string, T_TYPE, TF_COMMAND, S_STRING
-select, T_SELECT, TF_COMMAND
-range, T_RANGE, TF_COMMAND
-visible, T_VISIBLE, TF_COMMAND
-option, T_OPTION, TF_COMMAND
-on, T_ON, TF_PARAM
-modules, T_OPT_MODULES, TF_OPTION
-defconfig_list, T_OPT_DEFCONFIG_LIST,TF_OPTION
-env, T_OPT_ENV, TF_OPTION
-allnoconfig_y, T_OPT_ALLNOCONFIG_Y,TF_OPTION
-%%
deleted file mode 100644
@@ -1,293 +0,0 @@
-/* ANSI-C code produced by gperf version 3.0.4 */
-/* Command-line: gperf -t --output-file scripts/kconfig/zconf.hash.c_shipped -a -C -E -g -k '1,3,$' -p -t scripts/kconfig/zconf.gperf */
-
-#if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
- && ('%' == 37) && ('&' == 38) && ('\'' == 39) && ('(' == 40) \
- && (')' == 41) && ('*' == 42) && ('+' == 43) && (',' == 44) \
- && ('-' == 45) && ('.' == 46) && ('/' == 47) && ('0' == 48) \
- && ('1' == 49) && ('2' == 50) && ('3' == 51) && ('4' == 52) \
- && ('5' == 53) && ('6' == 54) && ('7' == 55) && ('8' == 56) \
- && ('9' == 57) && (':' == 58) && (';' == 59) && ('<' == 60) \
- && ('=' == 61) && ('>' == 62) && ('?' == 63) && ('A' == 65) \
- && ('B' == 66) && ('C' == 67) && ('D' == 68) && ('E' == 69) \
- && ('F' == 70) && ('G' == 71) && ('H' == 72) && ('I' == 73) \
- && ('J' == 74) && ('K' == 75) && ('L' == 76) && ('M' == 77) \
- && ('N' == 78) && ('O' == 79) && ('P' == 80) && ('Q' == 81) \
- && ('R' == 82) && ('S' == 83) && ('T' == 84) && ('U' == 85) \
- && ('V' == 86) && ('W' == 87) && ('X' == 88) && ('Y' == 89) \
- && ('Z' == 90) && ('[' == 91) && ('\\' == 92) && (']' == 93) \
- && ('^' == 94) && ('_' == 95) && ('a' == 97) && ('b' == 98) \
- && ('c' == 99) && ('d' == 100) && ('e' == 101) && ('f' == 102) \
- && ('g' == 103) && ('h' == 104) && ('i' == 105) && ('j' == 106) \
- && ('k' == 107) && ('l' == 108) && ('m' == 109) && ('n' == 110) \
- && ('o' == 111) && ('p' == 112) && ('q' == 113) && ('r' == 114) \
- && ('s' == 115) && ('t' == 116) && ('u' == 117) && ('v' == 118) \
- && ('w' == 119) && ('x' == 120) && ('y' == 121) && ('z' == 122) \
- && ('{' == 123) && ('|' == 124) && ('}' == 125) && ('~' == 126))
-/* The character set is not based on ISO-646. */
-#error "gperf generated tables don't work with this execution character set. Please report a bug to <bug-gnu-gperf@gnu.org>."
-#endif
-
-#line 10 "scripts/kconfig/zconf.gperf"
-struct kconf_id;
-
-static const struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
-/* maximum key range = 71, duplicates = 0 */
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static unsigned int
-kconf_id_hash (register const char *str, register unsigned int len)
-{
- static const unsigned char asso_values[] =
- {
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 0, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 5, 25, 25,
- 0, 0, 0, 5, 0, 0, 73, 73, 5, 0,
- 10, 5, 45, 73, 20, 20, 0, 15, 15, 73,
- 20, 5, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73, 73, 73, 73, 73,
- 73, 73, 73, 73, 73, 73
- };
- register int hval = len;
-
- switch (hval)
- {
- default:
- hval += asso_values[(unsigned char)str[2]];
- /*FALLTHROUGH*/
- case 2:
- case 1:
- hval += asso_values[(unsigned char)str[0]];
- break;
- }
- return hval + asso_values[(unsigned char)str[len - 1]];
-}
-
-struct kconf_id_strings_t
- {
- char kconf_id_strings_str2[sizeof("if")];
- char kconf_id_strings_str3[sizeof("int")];
- char kconf_id_strings_str5[sizeof("endif")];
- char kconf_id_strings_str7[sizeof("default")];
- char kconf_id_strings_str8[sizeof("tristate")];
- char kconf_id_strings_str9[sizeof("endchoice")];
- char kconf_id_strings_str10[sizeof("---help---")];
- char kconf_id_strings_str12[sizeof("def_tristate")];
- char kconf_id_strings_str13[sizeof("def_bool")];
- char kconf_id_strings_str14[sizeof("defconfig_list")];
- char kconf_id_strings_str17[sizeof("on")];
- char kconf_id_strings_str18[sizeof("optional")];
- char kconf_id_strings_str21[sizeof("option")];
- char kconf_id_strings_str22[sizeof("endmenu")];
- char kconf_id_strings_str23[sizeof("mainmenu")];
- char kconf_id_strings_str25[sizeof("menuconfig")];
- char kconf_id_strings_str27[sizeof("modules")];
- char kconf_id_strings_str28[sizeof("allnoconfig_y")];
- char kconf_id_strings_str29[sizeof("menu")];
- char kconf_id_strings_str31[sizeof("select")];
- char kconf_id_strings_str32[sizeof("comment")];
- char kconf_id_strings_str33[sizeof("env")];
- char kconf_id_strings_str35[sizeof("range")];
- char kconf_id_strings_str36[sizeof("choice")];
- char kconf_id_strings_str39[sizeof("bool")];
- char kconf_id_strings_str41[sizeof("source")];
- char kconf_id_strings_str42[sizeof("visible")];
- char kconf_id_strings_str43[sizeof("hex")];
- char kconf_id_strings_str46[sizeof("config")];
- char kconf_id_strings_str47[sizeof("boolean")];
- char kconf_id_strings_str51[sizeof("string")];
- char kconf_id_strings_str54[sizeof("help")];
- char kconf_id_strings_str56[sizeof("prompt")];
- char kconf_id_strings_str72[sizeof("depends")];
- };
-static const struct kconf_id_strings_t kconf_id_strings_contents =
- {
- "if",
- "int",
- "endif",
- "default",
- "tristate",
- "endchoice",
- "---help---",
- "def_tristate",
- "def_bool",
- "defconfig_list",
- "on",
- "optional",
- "option",
- "endmenu",
- "mainmenu",
- "menuconfig",
- "modules",
- "allnoconfig_y",
- "menu",
- "select",
- "comment",
- "env",
- "range",
- "choice",
- "bool",
- "source",
- "visible",
- "hex",
- "config",
- "boolean",
- "string",
- "help",
- "prompt",
- "depends"
- };
-#define kconf_id_strings ((const char *) &kconf_id_strings_contents)
-#ifdef __GNUC__
-__inline
-#if defined __GNUC_STDC_INLINE__ || defined __GNUC_GNU_INLINE__
-__attribute__ ((__gnu_inline__))
-#endif
-#endif
-const struct kconf_id *
-kconf_id_lookup (register const char *str, register unsigned int len)
-{
- enum
- {
- TOTAL_KEYWORDS = 34,
- MIN_WORD_LENGTH = 2,
- MAX_WORD_LENGTH = 14,
- MIN_HASH_VALUE = 2,
- MAX_HASH_VALUE = 72
- };
-
- static const struct kconf_id wordlist[] =
- {
- {-1}, {-1},
-#line 26 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str2, T_IF, TF_COMMAND|TF_PARAM},
-#line 37 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str3, T_TYPE, TF_COMMAND, S_INT},
- {-1},
-#line 27 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str5, T_ENDIF, TF_COMMAND},
- {-1},
-#line 30 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str7, T_DEFAULT, TF_COMMAND, S_UNKNOWN},
-#line 32 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str8, T_TYPE, TF_COMMAND, S_TRISTATE},
-#line 20 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str9, T_ENDCHOICE, TF_COMMAND},
-#line 25 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str10, T_HELP, TF_COMMAND},
- {-1},
-#line 33 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_TRISTATE},
-#line 36 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN},
-#line 46 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_OPT_DEFCONFIG_LIST,TF_OPTION},
- {-1}, {-1},
-#line 44 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_ON, TF_PARAM},
-#line 29 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_OPTIONAL, TF_COMMAND},
- {-1}, {-1},
-#line 43 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_OPTION, TF_COMMAND},
-#line 17 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_ENDMENU, TF_COMMAND},
-#line 15 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_MAINMENU, TF_COMMAND},
- {-1},
-#line 23 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str25, T_MENUCONFIG, TF_COMMAND},
- {-1},
-#line 45 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION},
-#line 48 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_OPT_ALLNOCONFIG_Y,TF_OPTION},
-#line 16 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND},
- {-1},
-#line 40 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SELECT, TF_COMMAND},
-#line 21 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND},
-#line 47 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_OPT_ENV, TF_OPTION},
- {-1},
-#line 41 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_RANGE, TF_COMMAND},
-#line 19 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_CHOICE, TF_COMMAND},
- {-1}, {-1},
-#line 34 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str39, T_TYPE, TF_COMMAND, S_BOOLEAN},
- {-1},
-#line 18 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41, T_SOURCE, TF_COMMAND},
-#line 42 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42, T_VISIBLE, TF_COMMAND},
-#line 38 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str43, T_TYPE, TF_COMMAND, S_HEX},
- {-1}, {-1},
-#line 22 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46, T_CONFIG, TF_COMMAND},
-#line 35 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47, T_TYPE, TF_COMMAND, S_BOOLEAN},
- {-1}, {-1}, {-1},
-#line 39 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51, T_TYPE, TF_COMMAND, S_STRING},
- {-1}, {-1},
-#line 24 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str54, T_HELP, TF_COMMAND},
- {-1},
-#line 31 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str56, T_PROMPT, TF_COMMAND},
- {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1},
- {-1}, {-1}, {-1}, {-1}, {-1}, {-1},
-#line 28 "scripts/kconfig/zconf.gperf"
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str72, T_DEPENDS, TF_COMMAND}
- };
-
- if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
- {
- register int key = kconf_id_hash (str, len);
-
- if (key <= MAX_HASH_VALUE && key >= 0)
- {
- register int o = wordlist[key].name;
- if (o >= 0)
- {
- register const char *s = o + kconf_id_strings;
-
- if (*str == *s && !strncmp (str + 1, s + 1, len - 1) && s[len] == '\0')
- return &wordlist[key];
- }
- }
- }
- return 0;
-}
-#line 49 "scripts/kconfig/zconf.gperf"
-
deleted file mode 100644
@@ -1,374 +0,0 @@
-%option nostdinit noyywrap never-interactive full ecs
-%option 8bit nodefault perf-report perf-report
-%option noinput
-%x COMMAND HELP STRING PARAM
-%{
-/*
- * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
- */
-
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "lkc.h"
-
-#define START_STRSIZE 16
-
-static struct {
- struct file *file;
- int lineno;
-} current_pos;
-
-static char *text;
-static int text_size, text_asize;
-
-struct buffer {
- struct buffer *parent;
- YY_BUFFER_STATE state;
-};
-
-struct buffer *current_buf;
-
-static int last_ts, first_ts;
-
-static void zconf_endhelp(void);
-static void zconf_endfile(void);
-
-static void new_string(void)
-{
- text = xmalloc(START_STRSIZE);
- text_asize = START_STRSIZE;
- text_size = 0;
- *text = 0;
-}
-
-static void append_string(const char *str, int size)
-{
- int new_size = text_size + size + 1;
- if (new_size > text_asize) {
- new_size += START_STRSIZE - 1;
- new_size &= -START_STRSIZE;
- text = realloc(text, new_size);
- text_asize = new_size;
- }
- memcpy(text + text_size, str, size);
- text_size += size;
- text[text_size] = 0;
-}
-
-static void alloc_string(const char *str, int size)
-{
- text = xmalloc(size + 1);
- memcpy(text, str, size);
- text[size] = 0;
-}
-
-static void warn_ignored_character(char chr)
-{
- fprintf(stderr,
- "%s:%d:warning: ignoring unsupported character '%c'\n",
- zconf_curname(), zconf_lineno(), chr);
-}
-%}
-
-n [A-Za-z0-9_-]
-
-%%
- int str = 0;
- int ts, i;
-
-[ \t]*#.*\n |
-[ \t]*\n {
- current_file->lineno++;
- return T_EOL;
-}
-[ \t]*#.*
-
-
-[ \t]+ {
- BEGIN(COMMAND);
-}
-
-. {
- unput(yytext[0]);
- BEGIN(COMMAND);
-}
-
-
-<COMMAND>{
- {n}+ {
- const struct kconf_id *id = kconf_id_lookup(yytext, yyleng);
- BEGIN(PARAM);
- current_pos.file = current_file;
- current_pos.lineno = current_file->lineno;
- if (id && id->flags & TF_COMMAND) {
- zconflval.id = id;
- return id->token;
- }
- alloc_string(yytext, yyleng);
- zconflval.string = text;
- return T_WORD;
- }
- . warn_ignored_character(*yytext);
- \n {
- BEGIN(INITIAL);
- current_file->lineno++;
- return T_EOL;
- }
-}
-
-<PARAM>{
- "&&" return T_AND;
- "||" return T_OR;
- "(" return T_OPEN_PAREN;
- ")" return T_CLOSE_PAREN;
- "!" return T_NOT;
- "=" return T_EQUAL;
- "!=" return T_UNEQUAL;
- "<=" return T_LESS_EQUAL;
- ">=" return T_GREATER_EQUAL;
- "<" return T_LESS;
- ">" return T_GREATER;
- \"|\' {
- str = yytext[0];
- new_string();
- BEGIN(STRING);
- }
- \n BEGIN(INITIAL); current_file->lineno++; return T_EOL;
- ({n}|[/.])+ {
- const struct kconf_id *id = kconf_id_lookup(yytext, yyleng);
- if (id && id->flags & TF_PARAM) {
- zconflval.id = id;
- return id->token;
- }
- alloc_string(yytext, yyleng);
- zconflval.string = text;
- return T_WORD;
- }
- #.* /* comment */
- \\\n current_file->lineno++;
- [[:blank:]]+
- . warn_ignored_character(*yytext);
- <<EOF>> {
- BEGIN(INITIAL);
- }
-}
-
-<STRING>{
- [^'"\\\n]+/\n {
- append_string(yytext, yyleng);
- zconflval.string = text;
- return T_WORD_QUOTE;
- }
- [^'"\\\n]+ {
- append_string(yytext, yyleng);
- }
- \\.?/\n {
- append_string(yytext + 1, yyleng - 1);
- zconflval.string = text;
- return T_WORD_QUOTE;
- }
- \\.? {
- append_string(yytext + 1, yyleng - 1);
- }
- \'|\" {
- if (str == yytext[0]) {
- BEGIN(PARAM);
- zconflval.string = text;
- return T_WORD_QUOTE;
- } else
- append_string(yytext, 1);
- }
- \n {
- printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
- current_file->lineno++;
- BEGIN(INITIAL);
- return T_EOL;
- }
- <<EOF>> {
- BEGIN(INITIAL);
- }
-}
-
-<HELP>{
- [ \t]+ {
- ts = 0;
- for (i = 0; i < yyleng; i++) {
- if (yytext[i] == '\t')
- ts = (ts & ~7) + 8;
- else
- ts++;
- }
- last_ts = ts;
- if (first_ts) {
- if (ts < first_ts) {
- zconf_endhelp();
- return T_HELPTEXT;
- }
- ts -= first_ts;
- while (ts > 8) {
- append_string(" ", 8);
- ts -= 8;
- }
- append_string(" ", ts);
- }
- }
- [ \t]*\n/[^ \t\n] {
- current_file->lineno++;
- zconf_endhelp();
- return T_HELPTEXT;
- }
- [ \t]*\n {
- current_file->lineno++;
- append_string("\n", 1);
- }
- [^ \t\n].* {
- while (yyleng) {
- if ((yytext[yyleng-1] != ' ') && (yytext[yyleng-1] != '\t'))
- break;
- yyleng--;
- }
- append_string(yytext, yyleng);
- if (!first_ts)
- first_ts = last_ts;
- }
- <<EOF>> {
- zconf_endhelp();
- return T_HELPTEXT;
- }
-}
-
-<<EOF>> {
- if (current_file) {
- zconf_endfile();
- return T_EOL;
- }
- fclose(yyin);
- yyterminate();
-}
-
-%%
-void zconf_starthelp(void)
-{
- new_string();
- last_ts = first_ts = 0;
- BEGIN(HELP);
-}
-
-static void zconf_endhelp(void)
-{
- zconflval.string = text;
- BEGIN(INITIAL);
-}
-
-
-/*
- * Try to open specified file with following names:
- * ./name
- * $(srctree)/name
- * The latter is used when srctree is separate from objtree
- * when compiling the kernel.
- * Return NULL if file is not found.
- */
-FILE *zconf_fopen(const char *name)
-{
- char *env, fullname[PATH_MAX+1];
- FILE *f;
-
- f = fopen(name, "r");
- if (!f && name != NULL && name[0] != '/') {
- env = getenv(SRCTREE);
- if (env) {
- sprintf(fullname, "%s/%s", env, name);
- f = fopen(fullname, "r");
- }
- }
- return f;
-}
-
-void zconf_initscan(const char *name)
-{
- yyin = zconf_fopen(name);
- if (!yyin) {
- printf("can't find file %s\n", name);
- exit(1);
- }
-
- current_buf = xmalloc(sizeof(*current_buf));
- memset(current_buf, 0, sizeof(*current_buf));
-
- current_file = file_lookup(name);
- current_file->lineno = 1;
-}
-
-void zconf_nextfile(const char *name)
-{
- struct file *iter;
- struct file *file = file_lookup(name);
- struct buffer *buf = xmalloc(sizeof(*buf));
- memset(buf, 0, sizeof(*buf));
-
- current_buf->state = YY_CURRENT_BUFFER;
- yyin = zconf_fopen(file->name);
- if (!yyin) {
- printf("%s:%d: can't open file \"%s\"\n",
- zconf_curname(), zconf_lineno(), file->name);
- exit(1);
- }
- yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
- buf->parent = current_buf;
- current_buf = buf;
-
- for (iter = current_file->parent; iter; iter = iter->parent ) {
- if (!strcmp(current_file->name,iter->name) ) {
- printf("%s:%d: recursive inclusion detected. "
- "Inclusion path:\n current file : '%s'\n",
- zconf_curname(), zconf_lineno(),
- zconf_curname());
- iter = current_file->parent;
- while (iter && \
- strcmp(iter->name,current_file->name)) {
- printf(" included from: '%s:%d'\n",
- iter->name, iter->lineno-1);
- iter = iter->parent;
- }
- if (iter)
- printf(" included from: '%s:%d'\n",
- iter->name, iter->lineno+1);
- exit(1);
- }
- }
- file->lineno = 1;
- file->parent = current_file;
- current_file = file;
-}
-
-static void zconf_endfile(void)
-{
- struct buffer *parent;
-
- current_file = current_file->parent;
-
- parent = current_buf->parent;
- if (parent) {
- fclose(yyin);
- yy_delete_buffer(YY_CURRENT_BUFFER);
- yy_switch_to_buffer(parent->state);
- }
- free(current_buf);
- current_buf = parent;
-}
-
-int zconf_lineno(void)
-{
- return current_pos.lineno;
-}
-
-const char *zconf_curname(void)
-{
- return current_pos.file ? current_pos.file->name : "<none>";
-}
deleted file mode 100644
@@ -1,2473 +0,0 @@
-
-#line 3 "scripts/kconfig/zconf.lex.c_shipped"
-
-#define YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define yy_create_buffer zconf_create_buffer
-#define yy_delete_buffer zconf_delete_buffer
-#define yy_flex_debug zconf_flex_debug
-#define yy_init_buffer zconf_init_buffer
-#define yy_flush_buffer zconf_flush_buffer
-#define yy_load_buffer_state zconf_load_buffer_state
-#define yy_switch_to_buffer zconf_switch_to_buffer
-#define yyin zconfin
-#define yyleng zconfleng
-#define yylex zconflex
-#define yylineno zconflineno
-#define yyout zconfout
-#define yyrestart zconfrestart
-#define yytext zconftext
-#define yywrap zconfwrap
-#define yyalloc zconfalloc
-#define yyrealloc zconfrealloc
-#define yyfree zconffree
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 35
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX (4294967295U)
-#endif
-
-#endif /* ! C99 */
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE zconfrestart(zconfin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k.
- * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
- * Ditto for the __ia64__ case accordingly.
- */
-#define YY_BUF_SIZE 32768
-#else
-#define YY_BUF_SIZE 16384
-#endif /* __ia64__ */
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-extern int zconfleng;
-
-extern FILE *zconfin, *zconfout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
- #define YY_LESS_LINENO(n)
-
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up zconftext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up zconftext again */ \
- } \
- while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr) )
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- int yy_bs_lineno; /**< The line count. */
- int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via zconfrestart()), so that the user can continue scanning by
- * just pointing zconfin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
-
- };
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
- ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
- : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when zconftext is formed. */
-static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-int zconfleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow zconfwrap()'s to do buffer switches
- * instead of setting up a fresh zconfin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void zconfrestart (FILE *input_file );
-void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-YY_BUFFER_STATE zconf_create_buffer (FILE *file,int size );
-void zconf_delete_buffer (YY_BUFFER_STATE b );
-void zconf_flush_buffer (YY_BUFFER_STATE b );
-void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer );
-void zconfpop_buffer_state (void );
-
-static void zconfensure_buffer_stack (void );
-static void zconf_load_buffer_state (void );
-static void zconf_init_buffer (YY_BUFFER_STATE b,FILE *file );
-
-#define YY_FLUSH_BUFFER zconf_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE zconf_scan_buffer (char *base,yy_size_t size );
-YY_BUFFER_STATE zconf_scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE zconf_scan_bytes (yyconst char *bytes,int len );
-
-void *zconfalloc (yy_size_t );
-void *zconfrealloc (void *,yy_size_t );
-void zconffree (void * );
-
-#define yy_new_buffer zconf_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
- zconfensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
- zconfensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-#define zconfwrap(n) 1
-#define YY_SKIP_YYWRAP
-
-typedef unsigned char YY_CHAR;
-
-FILE *zconfin = (FILE *) 0, *zconfout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int zconflineno;
-
-int zconflineno = 1;
-
-extern char *zconftext;
-#define yytext_ptr zconftext
-static yyconst flex_int16_t yy_nxt[][18] =
- {
- {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0
- },
-
- {
- 11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
- 12, 12, 12, 12, 12, 12, 12, 12
- },
-
- {
- 11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
- 12, 12, 12, 12, 12, 12, 12, 12
- },
-
- {
- 11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
- 16, 18, 16, 16, 16, 16, 16, 16
- },
-
- {
- 11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
- 16, 18, 16, 16, 16, 16, 16, 16
-
- },
-
- {
- 11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
- 19, 19, 19, 19, 19, 19, 19, 19
- },
-
- {
- 11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
- 19, 19, 19, 19, 19, 19, 19, 19
- },
-
- {
- 11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
- 22, 22, 22, 22, 22, 22, 25, 22
- },
-
- {
- 11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
- 22, 22, 22, 22, 22, 22, 25, 22
- },
-
- {
- 11, 26, 27, 28, 29, 30, 31, 32, 30, 33,
- 34, 35, 35, 36, 37, 38, 39, 40
-
- },
-
- {
- 11, 26, 27, 28, 29, 30, 31, 32, 30, 33,
- 34, 35, 35, 36, 37, 38, 39, 40
- },
-
- {
- -11, -11, -11, -11, -11, -11, -11, -11, -11, -11,
- -11, -11, -11, -11, -11, -11, -11, -11
- },
-
- {
- 11, -12, -12, -12, -12, -12, -12, -12, -12, -12,
- -12, -12, -12, -12, -12, -12, -12, -12
- },
-
- {
- 11, -13, 41, 42, -13, -13, 43, -13, -13, -13,
- -13, -13, -13, -13, -13, -13, -13, -13
- },
-
- {
- 11, -14, -14, -14, -14, -14, -14, -14, -14, -14,
- -14, -14, -14, -14, -14, -14, -14, -14
-
- },
-
- {
- 11, 44, 44, 45, 44, 44, 44, 44, 44, 44,
- 44, 44, 44, 44, 44, 44, 44, 44
- },
-
- {
- 11, -16, -16, -16, -16, -16, -16, -16, -16, -16,
- -16, -16, -16, -16, -16, -16, -16, -16
- },
-
- {
- 11, -17, -17, -17, -17, -17, -17, -17, -17, -17,
- -17, -17, -17, -17, -17, -17, -17, -17
- },
-
- {
- 11, -18, -18, -18, -18, -18, -18, -18, -18, -18,
- -18, 46, -18, -18, -18, -18, -18, -18
- },
-
- {
- 11, 47, 47, -19, 47, 47, 47, 47, 47, 47,
- 47, 47, 47, 47, 47, 47, 47, 47
-
- },
-
- {
- 11, -20, 48, 49, -20, -20, -20, -20, -20, -20,
- -20, -20, -20, -20, -20, -20, -20, -20
- },
-
- {
- 11, 50, -21, -21, 50, 50, 50, 50, 50, 50,
- 50, 50, 50, 50, 50, 50, 50, 50
- },
-
- {
- 11, 51, 51, 52, 51, -22, 51, 51, -22, 51,
- 51, 51, 51, 51, 51, 51, -22, 51
- },
-
- {
- 11, -23, -23, -23, -23, -23, -23, -23, -23, -23,
- -23, -23, -23, -23, -23, -23, -23, -23
- },
-
- {
- 11, -24, -24, -24, -24, -24, -24, -24, -24, -24,
- -24, -24, -24, -24, -24, -24, -24, -24
-
- },
-
- {
- 11, 53, 53, 54, 53, 53, 53, 53, 53, 53,
- 53, 53, 53, 53, 53, 53, 53, 53
- },
-
- {
- 11, -26, -26, -26, -26, -26, -26, -26, -26, -26,
- -26, -26, -26, -26, -26, -26, -26, -26
- },
-
- {
- 11, -27, 55, -27, -27, -27, -27, -27, -27, -27,
- -27, -27, -27, -27, -27, -27, -27, -27
- },
-
- {
- 11, -28, -28, -28, -28, -28, -28, -28, -28, -28,
- -28, -28, -28, -28, -28, -28, -28, -28
- },
-
- {
- 11, -29, -29, -29, -29, -29, -29, -29, -29, -29,
- -29, -29, -29, -29, 56, -29, -29, -29
-
- },
-
- {
- 11, -30, -30, -30, -30, -30, -30, -30, -30, -30,
- -30, -30, -30, -30, -30, -30, -30, -30
- },
-
- {
- 11, 57, 57, -31, 57, 57, 57, 57, 57, 57,
- 57, 57, 57, 57, 57, 57, 57, 57
- },
-
- {
- 11, -32, -32, -32, -32, -32, -32, 58, -32, -32,
- -32, -32, -32, -32, -32, -32, -32, -32
- },
-
- {
- 11, -33, -33, -33, -33, -33, -33, -33, -33, -33,
- -33, -33, -33, -33, -33, -33, -33, -33
- },
-
- {
- 11, -34, -34, -34, -34, -34, -34, -34, -34, -34,
- -34, -34, -34, -34, -34, -34, -34, -34
-
- },
-
- {
- 11, -35, -35, -35, -35, -35, -35, -35, -35, -35,
- -35, 59, 59, -35, -35, -35, -35, -35
- },
-
- {
- 11, -36, -36, -36, -36, -36, -36, -36, -36, -36,
- -36, -36, -36, -36, 60, -36, -36, -36
- },
-
- {
- 11, -37, -37, -37, -37, -37, -37, -37, -37, -37,
- -37, -37, -37, -37, -37, -37, -37, -37
- },
-
- {
- 11, -38, -38, -38, -38, -38, -38, -38, -38, -38,
- -38, -38, -38, -38, 61, -38, -38, -38
- },
-
- {
- 11, -39, -39, 62, -39, -39, -39, -39, -39, -39,
- -39, -39, -39, -39, -39, -39, -39, -39
-
- },
-
- {
- 11, -40, -40, -40, -40, -40, -40, -40, -40, -40,
- -40, -40, -40, -40, -40, -40, -40, 63
- },
-
- {
- 11, -41, 41, 42, -41, -41, 43, -41, -41, -41,
- -41, -41, -41, -41, -41, -41, -41, -41
- },
-
- {
- 11, -42, -42, -42, -42, -42, -42, -42, -42, -42,
- -42, -42, -42, -42, -42, -42, -42, -42
- },
-
- {
- 11, 44, 44, 45, 44, 44, 44, 44, 44, 44,
- 44, 44, 44, 44, 44, 44, 44, 44
- },
-
- {
- 11, 44, 44, 45, 44, 44, 44, 44, 44, 44,
- 44, 44, 44, 44, 44, 44, 44, 44
-
- },
-
- {
- 11, -45, -45, -45, -45, -45, -45, -45, -45, -45,
- -45, -45, -45, -45, -45, -45, -45, -45
- },
-
- {
- 11, -46, -46, -46, -46, -46, -46, -46, -46, -46,
- -46, 46, -46, -46, -46, -46, -46, -46
- },
-
- {
- 11, 47, 47, -47, 47, 47, 47, 47, 47, 47,
- 47, 47, 47, 47, 47, 47, 47, 47
- },
-
- {
- 11, -48, 48, 49, -48, -48, -48, -48, -48, -48,
- -48, -48, -48, -48, -48, -48, -48, -48
- },
-
- {
- 11, 50, -49, -49, 50, 50, 50, 50, 50, 50,
- 50, 50, 50, 50, 50, 50, 50, 50
-
- },
-
- {
- 11, -50, -50, -50, -50, -50, -50, -50, -50, -50,
- -50, -50, -50, -50, -50, -50, -50, -50
- },
-
- {
- 11, 51, 51, 52, 51, -51, 51, 51, -51, 51,
- 51, 51, 51, 51, 51, 51, -51, 51
- },
-
- {
- 11, -52, -52, -52, -52, -52, -52, -52, -52, -52,
- -52, -52, -52, -52, -52, -52, -52, -52
- },
-
- {
- 11, -53, -53, 54, -53, -53, -53, -53, -53, -53,
- -53, -53, -53, -53, -53, -53, -53, -53
- },
-
- {
- 11, -54, -54, -54, -54, -54, -54, -54, -54, -54,
- -54, -54, -54, -54, -54, -54, -54, -54
-
- },
-
- {
- 11, -55, 55, -55, -55, -55, -55, -55, -55, -55,
- -55, -55, -55, -55, -55, -55, -55, -55
- },
-
- {
- 11, -56, -56, -56, -56, -56, -56, -56, -56, -56,
- -56, -56, -56, -56, -56, -56, -56, -56
- },
-
- {
- 11, 57, 57, -57, 57, 57, 57, 57, 57, 57,
- 57, 57, 57, 57, 57, 57, 57, 57
- },
-
- {
- 11, -58, -58, -58, -58, -58, -58, -58, -58, -58,
- -58, -58, -58, -58, -58, -58, -58, -58
- },
-
- {
- 11, -59, -59, -59, -59, -59, -59, -59, -59, -59,
- -59, 59, 59, -59, -59, -59, -59, -59
-
- },
-
- {
- 11, -60, -60, -60, -60, -60, -60, -60, -60, -60,
- -60, -60, -60, -60, -60, -60, -60, -60
- },
-
- {
- 11, -61, -61, -61, -61, -61, -61, -61, -61, -61,
- -61, -61, -61, -61, -61, -61, -61, -61
- },
-
- {
- 11, -62, -62, -62, -62, -62, -62, -62, -62, -62,
- -62, -62, -62, -62, -62, -62, -62, -62
- },
-
- {
- 11, -63, -63, -63, -63, -63, -63, -63, -63, -63,
- -63, -63, -63, -63, -63, -63, -63, -63
- },
-
- } ;
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up zconftext.
- */
-#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- zconfleng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 37
-#define YY_END_OF_BUFFER 38
-/* This struct is not used in this scanner,
- but its presence is necessary. */
-struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
-static yyconst flex_int16_t yy_accept[64] =
- { 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 38, 5, 4, 2, 3, 7, 8, 6, 36, 33,
- 35, 28, 32, 31, 30, 26, 25, 21, 13, 20,
- 23, 26, 11, 12, 22, 18, 14, 19, 26, 26,
- 4, 2, 3, 3, 1, 6, 36, 33, 35, 34,
- 28, 27, 30, 29, 25, 15, 23, 9, 22, 16,
- 17, 24, 10
- } ;
-
-static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 2, 4, 5, 6, 1, 1, 7, 8, 9,
- 10, 1, 1, 1, 11, 12, 12, 11, 11, 11,
- 11, 11, 11, 11, 11, 11, 11, 1, 1, 13,
- 14, 15, 1, 1, 11, 11, 11, 11, 11, 11,
- 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
- 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
- 1, 16, 1, 1, 11, 1, 11, 11, 11, 11,
-
- 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
- 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
- 11, 11, 1, 17, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-extern int zconf_flex_debug;
-int zconf_flex_debug = 0;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *zconftext;
-#define YY_NO_INPUT 1
-
-/*
- * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
- */
-
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "lkc.h"
-
-#define START_STRSIZE 16
-
-static struct {
- struct file *file;
- int lineno;
-} current_pos;
-
-static char *text;
-static int text_size, text_asize;
-
-struct buffer {
- struct buffer *parent;
- YY_BUFFER_STATE state;
-};
-
-struct buffer *current_buf;
-
-static int last_ts, first_ts;
-
-static void zconf_endhelp(void);
-static void zconf_endfile(void);
-
-static void new_string(void)
-{
- text = xmalloc(START_STRSIZE);
- text_asize = START_STRSIZE;
- text_size = 0;
- *text = 0;
-}
-
-static void append_string(const char *str, int size)
-{
- int new_size = text_size + size + 1;
- if (new_size > text_asize) {
- new_size += START_STRSIZE - 1;
- new_size &= -START_STRSIZE;
- text = realloc(text, new_size);
- text_asize = new_size;
- }
- memcpy(text + text_size, str, size);
- text_size += size;
- text[text_size] = 0;
-}
-
-static void alloc_string(const char *str, int size)
-{
- text = xmalloc(size + 1);
- memcpy(text, str, size);
- text[size] = 0;
-}
-
-static void warn_ignored_character(char chr)
-{
- fprintf(stderr,
- "%s:%d:warning: ignoring unsupported character '%c'\n",
- zconf_curname(), zconf_lineno(), chr);
-}
-
-#define INITIAL 0
-#define COMMAND 1
-#define HELP 2
-#define STRING 3
-#define PARAM 4
-
-#ifndef YY_NO_UNISTD_H
-/* Special case for "unistd.h", since it is non-ANSI. We include it way
- * down here because we want the user's section 1 to have been scanned first.
- * The user has a chance to override it with an option.
- */
-#include <unistd.h>
-#endif
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Accessor methods to globals.
- These are made visible to non-reentrant scanners for convenience. */
-
-int zconflex_destroy (void );
-
-int zconfget_debug (void );
-
-void zconfset_debug (int debug_flag );
-
-YY_EXTRA_TYPE zconfget_extra (void );
-
-void zconfset_extra (YY_EXTRA_TYPE user_defined );
-
-FILE *zconfget_in (void );
-
-void zconfset_in (FILE * in_str );
-
-FILE *zconfget_out (void );
-
-void zconfset_out (FILE * out_str );
-
-int zconfget_leng (void );
-
-char *zconfget_text (void );
-
-int zconfget_lineno (void );
-
-void zconfset_lineno (int line_number );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int zconfwrap (void );
-#else
-extern int zconfwrap (void );
-#endif
-#endif
-
- static void yyunput (int c,char *buf_ptr );
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k */
-#define YY_READ_BUF_SIZE 16384
-#else
-#define YY_READ_BUF_SIZE 8192
-#endif /* __ia64__ */
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0)
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- errno=0; \
- while ( (result = read( fileno(zconfin), (char *) buf, max_size )) < 0 ) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(zconfin); \
- }\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int zconflex (void);
-
-#define YY_DECL int zconflex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after zconftext and zconfleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
- int str = 0;
- int ts, i;
-
- if ( !(yy_init) )
- {
- (yy_init) = 1;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
-
- if ( ! zconfin )
- zconfin = stdin;
-
- if ( ! zconfout )
- zconfout = stdout;
-
- if ( ! YY_CURRENT_BUFFER ) {
- zconfensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- zconf_create_buffer(zconfin,YY_BUF_SIZE );
- }
-
- zconf_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
-
- /* Support of zconftext. */
- *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = (yy_start);
-yy_match:
- while ( (yy_current_state = yy_nxt[yy_current_state][ yy_ec[YY_SC_TO_UI(*yy_cp)] ]) > 0 )
- ++yy_cp;
-
- yy_current_state = -yy_current_state;
-
-yy_find_action:
- yy_act = yy_accept[yy_current_state];
-
- YY_DO_BEFORE_ACTION;
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
-case 1:
-/* rule 1 can match eol */
-case 2:
-/* rule 2 can match eol */
-YY_RULE_SETUP
-{
- current_file->lineno++;
- return T_EOL;
-}
- YY_BREAK
-case 3:
-YY_RULE_SETUP
-
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-{
- BEGIN(COMMAND);
-}
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-{
- unput(zconftext[0]);
- BEGIN(COMMAND);
-}
- YY_BREAK
-
-case 6:
-YY_RULE_SETUP
-{
- const struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
- BEGIN(PARAM);
- current_pos.file = current_file;
- current_pos.lineno = current_file->lineno;
- if (id && id->flags & TF_COMMAND) {
- zconflval.id = id;
- return id->token;
- }
- alloc_string(zconftext, zconfleng);
- zconflval.string = text;
- return T_WORD;
- }
- YY_BREAK
-case 7:
-YY_RULE_SETUP
-warn_ignored_character(*zconftext);
- YY_BREAK
-case 8:
-/* rule 8 can match eol */
-YY_RULE_SETUP
-{
- BEGIN(INITIAL);
- current_file->lineno++;
- return T_EOL;
- }
- YY_BREAK
-
-case 9:
-YY_RULE_SETUP
-return T_AND;
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-return T_OR;
- YY_BREAK
-case 11:
-YY_RULE_SETUP
-return T_OPEN_PAREN;
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-return T_CLOSE_PAREN;
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-return T_NOT;
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-return T_EQUAL;
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-return T_UNEQUAL;
- YY_BREAK
-case 16:
-YY_RULE_SETUP
-return T_LESS_EQUAL;
- YY_BREAK
-case 17:
-YY_RULE_SETUP
-return T_GREATER_EQUAL;
- YY_BREAK
-case 18:
-YY_RULE_SETUP
-return T_LESS;
- YY_BREAK
-case 19:
-YY_RULE_SETUP
-return T_GREATER;
- YY_BREAK
-case 20:
-YY_RULE_SETUP
-{
- str = zconftext[0];
- new_string();
- BEGIN(STRING);
- }
- YY_BREAK
-case 21:
-/* rule 21 can match eol */
-YY_RULE_SETUP
-BEGIN(INITIAL); current_file->lineno++; return T_EOL;
- YY_BREAK
-case 22:
-YY_RULE_SETUP
-{
- const struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
- if (id && id->flags & TF_PARAM) {
- zconflval.id = id;
- return id->token;
- }
- alloc_string(zconftext, zconfleng);
- zconflval.string = text;
- return T_WORD;
- }
- YY_BREAK
-case 23:
-YY_RULE_SETUP
-/* comment */
- YY_BREAK
-case 24:
-/* rule 24 can match eol */
-YY_RULE_SETUP
-current_file->lineno++;
- YY_BREAK
-case 25:
-YY_RULE_SETUP
-
- YY_BREAK
-case 26:
-YY_RULE_SETUP
-warn_ignored_character(*zconftext);
- YY_BREAK
-case YY_STATE_EOF(PARAM):
-{
- BEGIN(INITIAL);
- }
- YY_BREAK
-
-case 27:
-/* rule 27 can match eol */
-*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up zconftext again */
-YY_RULE_SETUP
-{
- append_string(zconftext, zconfleng);
- zconflval.string = text;
- return T_WORD_QUOTE;
- }
- YY_BREAK
-case 28:
-YY_RULE_SETUP
-{
- append_string(zconftext, zconfleng);
- }
- YY_BREAK
-case 29:
-/* rule 29 can match eol */
-*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up zconftext again */
-YY_RULE_SETUP
-{
- append_string(zconftext + 1, zconfleng - 1);
- zconflval.string = text;
- return T_WORD_QUOTE;
- }
- YY_BREAK
-case 30:
-YY_RULE_SETUP
-{
- append_string(zconftext + 1, zconfleng - 1);
- }
- YY_BREAK
-case 31:
-YY_RULE_SETUP
-{
- if (str == zconftext[0]) {
- BEGIN(PARAM);
- zconflval.string = text;
- return T_WORD_QUOTE;
- } else
- append_string(zconftext, 1);
- }
- YY_BREAK
-case 32:
-/* rule 32 can match eol */
-YY_RULE_SETUP
-{
- printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
- current_file->lineno++;
- BEGIN(INITIAL);
- return T_EOL;
- }
- YY_BREAK
-case YY_STATE_EOF(STRING):
-{
- BEGIN(INITIAL);
- }
- YY_BREAK
-
-case 33:
-YY_RULE_SETUP
-{
- ts = 0;
- for (i = 0; i < zconfleng; i++) {
- if (zconftext[i] == '\t')
- ts = (ts & ~7) + 8;
- else
- ts++;
- }
- last_ts = ts;
- if (first_ts) {
- if (ts < first_ts) {
- zconf_endhelp();
- return T_HELPTEXT;
- }
- ts -= first_ts;
- while (ts > 8) {
- append_string(" ", 8);
- ts -= 8;
- }
- append_string(" ", ts);
- }
- }
- YY_BREAK
-case 34:
-/* rule 34 can match eol */
-*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up zconftext again */
-YY_RULE_SETUP
-{
- current_file->lineno++;
- zconf_endhelp();
- return T_HELPTEXT;
- }
- YY_BREAK
-case 35:
-/* rule 35 can match eol */
-YY_RULE_SETUP
-{
- current_file->lineno++;
- append_string("\n", 1);
- }
- YY_BREAK
-case 36:
-YY_RULE_SETUP
-{
- while (zconfleng) {
- if ((zconftext[zconfleng-1] != ' ') && (zconftext[zconfleng-1] != '\t'))
- break;
- zconfleng--;
- }
- append_string(zconftext, zconfleng);
- if (!first_ts)
- first_ts = last_ts;
- }
- YY_BREAK
-case YY_STATE_EOF(HELP):
-{
- zconf_endhelp();
- return T_HELPTEXT;
- }
- YY_BREAK
-
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(COMMAND):
-{
- if (current_file) {
- zconf_endfile();
- return T_EOL;
- }
- fclose(zconfin);
- yyterminate();
-}
- YY_BREAK
-case 37:
-YY_RULE_SETUP
-YY_FATAL_ERROR( "flex scanner jammed" );
- YY_BREAK
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed zconfin at a new source and called
- * zconflex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = zconfin;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( zconfwrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * zconftext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-} /* end of zconflex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- zconfrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- zconfrestart(zconfin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
- static yy_state_type yy_get_previous_state (void)
-{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- yy_current_state = yy_nxt[yy_current_state][(*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1)];
- }
-
- return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
- static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-{
- register int yy_is_jam;
-
- yy_current_state = yy_nxt[yy_current_state][1];
- yy_is_jam = (yy_current_state <= 0);
-
- return yy_is_jam ? 0 : yy_current_state;
-}
-
- static void yyunput (int c, register char * yy_bp )
-{
- register char *yy_cp;
-
- yy_cp = (yy_c_buf_p);
-
- /* undo effects of setting up zconftext */
- *yy_cp = (yy_hold_char);
-
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- { /* need to shift things up to make room */
- /* +2 for EOB chars. */
- register int number_to_move = (yy_n_chars) + 2;
- register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
- register char *source =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
-
- while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- *--dest = *--source;
-
- yy_cp += (int) (dest - source);
- yy_bp += (int) (dest - source);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
-
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- YY_FATAL_ERROR( "flex scanner push-back overflow" );
- }
-
- *--yy_cp = (char) c;
-
- (yytext_ptr) = yy_bp;
- (yy_hold_char) = *yy_cp;
- (yy_c_buf_p) = yy_cp;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
- static int yyinput (void)
-#else
- static int input (void)
-#endif
-
-{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- zconfrestart(zconfin );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( zconfwrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve zconftext */
- (yy_hold_char) = *++(yy_c_buf_p);
-
- return c;
-}
-#endif /* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- *
- * @note This function does not reset the start condition to @c INITIAL .
- */
- void zconfrestart (FILE * input_file )
-{
-
- if ( ! YY_CURRENT_BUFFER ){
- zconfensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- zconf_create_buffer(zconfin,YY_BUF_SIZE );
- }
-
- zconf_init_buffer(YY_CURRENT_BUFFER,input_file );
- zconf_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- *
- */
- void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * zconfpop_buffer_state();
- * zconfpush_buffer_state(new_buffer);
- */
- zconfensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- zconf_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (zconfwrap()) processing, but the only time this flag
- * is looked at is after zconfwrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void zconf_load_buffer_state (void)
-{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- zconfin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
- * @return the allocated buffer state.
- */
- YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size )
-{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) zconfalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- zconf_init_buffer(b,file );
-
- return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with zconf_create_buffer()
- *
- */
- void zconf_delete_buffer (YY_BUFFER_STATE b )
-{
-
- if ( ! b )
- return;
-
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- zconffree((void *) b->yy_ch_buf );
-
- zconffree((void *) b );
-}
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a zconfrestart() or at EOF.
- */
- static void zconf_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-{
- int oerrno = errno;
-
- zconf_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
- /* If b is the current buffer, then zconf_init_buffer was _probably_
- * called from zconfrestart() or through yy_get_next_buffer.
- * In that case, we don't want to reset the lineno or column.
- */
- if (b != YY_CURRENT_BUFFER){
- b->yy_bs_lineno = 1;
- b->yy_bs_column = 0;
- }
-
- b->yy_is_interactive = 0;
-
- errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
- */
- void zconf_flush_buffer (YY_BUFFER_STATE b )
-{
- if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
- b->yy_buf_pos = &b->yy_ch_buf[0];
-
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- if ( b == YY_CURRENT_BUFFER )
- zconf_load_buffer_state( );
-}
-
-/** Pushes the new state onto the stack. The new state becomes
- * the current state. This function will allocate the stack
- * if necessary.
- * @param new_buffer The new state.
- *
- */
-void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer )
-{
- if (new_buffer == NULL)
- return;
-
- zconfensure_buffer_stack();
-
- /* This block is copied from zconf_switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
- /* copied from zconf_switch_to_buffer. */
- zconf_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-/** Removes and deletes the top of the stack, if present.
- * The next element becomes the new top.
- *
- */
-void zconfpop_buffer_state (void)
-{
- if (!YY_CURRENT_BUFFER)
- return;
-
- zconf_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
-
- if (YY_CURRENT_BUFFER) {
- zconf_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
-}
-
-/* Allocates the stack if it does not exist.
- * Guarantees space for at least one push.
- */
-static void zconfensure_buffer_stack (void)
-{
- int num_to_alloc;
-
- if (!(yy_buffer_stack)) {
-
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
- */
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)zconfrealloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
-}
-
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size )
-{
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- zconf_switch_to_buffer(b );
-
- return b;
-}
-
-/** Setup the input buffer state to scan a string. The next call to zconflex() will
- * scan from a @e copy of @a str.
- * @param yystr a NUL-terminated string to scan
- *
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
- * zconf_scan_bytes() instead.
- */
-YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr )
-{
-
- return zconf_scan_bytes(yystr,strlen(yystr) );
-}
-
-/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will
- * scan from a @e copy of @a bytes.
- * @param yybytes the byte buffer to scan
- * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len )
-{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) zconfalloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_bytes()" );
-
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
-
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = zconf_scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in zconf_scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
-}
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-static void yy_fatal_error (yyconst char* msg )
-{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
-}
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up zconftext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- zconftext[zconfleng] = (yy_hold_char); \
- (yy_c_buf_p) = zconftext + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- zconfleng = yyless_macro_arg; \
- } \
- while ( 0 )
-
-/* Accessor methods (get/set functions) to struct members. */
-
-/** Get the current line number.
- *
- */
-int zconfget_lineno (void)
-{
-
- return zconflineno;
-}
-
-/** Get the input stream.
- *
- */
-FILE *zconfget_in (void)
-{
- return zconfin;
-}
-
-/** Get the output stream.
- *
- */
-FILE *zconfget_out (void)
-{
- return zconfout;
-}
-
-/** Get the length of the current token.
- *
- */
-int zconfget_leng (void)
-{
- return zconfleng;
-}
-
-/** Get the current token.
- *
- */
-
-char *zconfget_text (void)
-{
- return zconftext;
-}
-
-/** Set the current line number.
- * @param line_number
- *
- */
-void zconfset_lineno (int line_number )
-{
-
- zconflineno = line_number;
-}
-
-/** Set the input stream. This does not discard the current
- * input buffer.
- * @param in_str A readable stream.
- *
- * @see zconf_switch_to_buffer
- */
-void zconfset_in (FILE * in_str )
-{
- zconfin = in_str ;
-}
-
-void zconfset_out (FILE * out_str )
-{
- zconfout = out_str ;
-}
-
-int zconfget_debug (void)
-{
- return zconf_flex_debug;
-}
-
-void zconfset_debug (int bdebug )
-{
- zconf_flex_debug = bdebug ;
-}
-
-static int yy_init_globals (void)
-{
- /* Initialization is the same as for the non-reentrant scanner.
- * This function is called from zconflex_destroy(), so don't allocate here.
- */
-
- (yy_buffer_stack) = 0;
- (yy_buffer_stack_top) = 0;
- (yy_buffer_stack_max) = 0;
- (yy_c_buf_p) = (char *) 0;
- (yy_init) = 0;
- (yy_start) = 0;
-
-/* Defined in main.c */
-#ifdef YY_STDINIT
- zconfin = stdin;
- zconfout = stdout;
-#else
- zconfin = (FILE *) 0;
- zconfout = (FILE *) 0;
-#endif
-
- /* For future reference: Set errno on error, since we are called by
- * zconflex_init()
- */
- return 0;
-}
-
-/* zconflex_destroy is for both reentrant and non-reentrant scanners. */
-int zconflex_destroy (void)
-{
-
- /* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- zconf_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- zconfpop_buffer_state();
- }
-
- /* Destroy the stack itself. */
- zconffree((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
-
- /* Reset the globals. This is important in a non-reentrant scanner so the next time
- * zconflex() is called, initialization will occur. */
- yy_init_globals( );
-
- return 0;
-}
-
-/*
- * Internal utility routines.
- */
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
-}
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * s )
-{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
-
- return n;
-}
-#endif
-
-void *zconfalloc (yy_size_t size )
-{
- return (void *) malloc( size );
-}
-
-void *zconfrealloc (void * ptr, yy_size_t size )
-{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
-}
-
-void zconffree (void * ptr )
-{
- free( (char *) ptr ); /* see zconfrealloc() for (char *) cast */
-}
-
-#define YYTABLES_NAME "yytables"
-
-void zconf_starthelp(void)
-{
- new_string();
- last_ts = first_ts = 0;
- BEGIN(HELP);
-}
-
-static void zconf_endhelp(void)
-{
- zconflval.string = text;
- BEGIN(INITIAL);
-}
-
-/*
- * Try to open specified file with following names:
- * ./name
- * $(srctree)/name
- * The latter is used when srctree is separate from objtree
- * when compiling the kernel.
- * Return NULL if file is not found.
- */
-FILE *zconf_fopen(const char *name)
-{
- char *env, fullname[PATH_MAX+1];
- FILE *f;
-
- f = fopen(name, "r");
- if (!f && name != NULL && name[0] != '/') {
- env = getenv(SRCTREE);
- if (env) {
- sprintf(fullname, "%s/%s", env, name);
- f = fopen(fullname, "r");
- }
- }
- return f;
-}
-
-void zconf_initscan(const char *name)
-{
- zconfin = zconf_fopen(name);
- if (!zconfin) {
- printf("can't find file %s\n", name);
- exit(1);
- }
-
- current_buf = xmalloc(sizeof(*current_buf));
- memset(current_buf, 0, sizeof(*current_buf));
-
- current_file = file_lookup(name);
- current_file->lineno = 1;
-}
-
-void zconf_nextfile(const char *name)
-{
- struct file *iter;
- struct file *file = file_lookup(name);
- struct buffer *buf = xmalloc(sizeof(*buf));
- memset(buf, 0, sizeof(*buf));
-
- current_buf->state = YY_CURRENT_BUFFER;
- zconfin = zconf_fopen(file->name);
- if (!zconfin) {
- printf("%s:%d: can't open file \"%s\"\n",
- zconf_curname(), zconf_lineno(), file->name);
- exit(1);
- }
- zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE));
- buf->parent = current_buf;
- current_buf = buf;
-
- for (iter = current_file->parent; iter; iter = iter->parent ) {
- if (!strcmp(current_file->name,iter->name) ) {
- printf("%s:%d: recursive inclusion detected. "
- "Inclusion path:\n current file : '%s'\n",
- zconf_curname(), zconf_lineno(),
- zconf_curname());
- iter = current_file->parent;
- while (iter && \
- strcmp(iter->name,current_file->name)) {
- printf(" included from: '%s:%d'\n",
- iter->name, iter->lineno-1);
- iter = iter->parent;
- }
- if (iter)
- printf(" included from: '%s:%d'\n",
- iter->name, iter->lineno+1);
- exit(1);
- }
- }
- file->lineno = 1;
- file->parent = current_file;
- current_file = file;
-}
-
-static void zconf_endfile(void)
-{
- struct buffer *parent;
-
- current_file = current_file->parent;
-
- parent = current_buf->parent;
- if (parent) {
- fclose(zconfin);
- zconf_delete_buffer(YY_CURRENT_BUFFER);
- zconf_switch_to_buffer(parent->state);
- }
- free(current_buf);
- current_buf = parent;
-}
-
-int zconf_lineno(void)
-{
- return current_pos.lineno;
-}
-
-const char *zconf_curname(void)
-{
- return current_pos.file ? current_pos.file->name : "<none>";
-}
-
deleted file mode 100644
@@ -1,2580 +0,0 @@
-/* A Bison parser, made by GNU Bison 2.5.1. */
-
-/* Bison implementation for Yacc-like parsers in C
-
- Copyright (C) 1984, 1989-1990, 2000-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* C LALR(1) parser skeleton written by Richard Stallman, by
- simplifying the original so-called "semantic" parser. */
-
-/* All symbols defined below should begin with yy or YY, to avoid
- infringing on user name space. This should be done even for local
- variables, as they might otherwise be expanded by user macros.
- There are some unavoidable exceptions within include files to
- define necessary library symbols; they are noted "INFRINGES ON
- USER NAME SPACE" below. */
-
-/* Identify Bison output. */
-#define YYBISON 1
-
-/* Bison version. */
-#define YYBISON_VERSION "2.5.1"
-
-/* Skeleton name. */
-#define YYSKELETON_NAME "yacc.c"
-
-/* Pure parsers. */
-#define YYPURE 0
-
-/* Push parsers. */
-#define YYPUSH 0
-
-/* Pull parsers. */
-#define YYPULL 1
-
-/* Using locations. */
-#define YYLSP_NEEDED 0
-
-/* Substitute the variable and function names. */
-#define yyparse zconfparse
-#define yylex zconflex
-#define yyerror zconferror
-#define yylval zconflval
-#define yychar zconfchar
-#define yydebug zconfdebug
-#define yynerrs zconfnerrs
-
-
-/* Copy the first part of user declarations. */
-
-
-/*
- * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
- */
-
-#include <ctype.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdbool.h>
-
-#include "lkc.h"
-
-#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
-
-#define PRINTD 0x0001
-#define DEBUG_PARSE 0x0002
-
-int cdebug = PRINTD;
-
-extern int zconflex(void);
-static void zconfprint(const char *err, ...);
-static void zconf_error(const char *err, ...);
-static void zconferror(const char *err);
-static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken);
-
-struct symbol *symbol_hash[SYMBOL_HASHSIZE];
-
-static struct menu *current_menu, *current_entry;
-
-
-
-
-# ifndef YY_NULL
-# if defined __cplusplus && 201103L <= __cplusplus
-# define YY_NULL nullptr
-# else
-# define YY_NULL 0
-# endif
-# endif
-
-/* Enabling traces. */
-#ifndef YYDEBUG
-# define YYDEBUG 1
-#endif
-
-/* Enabling verbose error messages. */
-#ifdef YYERROR_VERBOSE
-# undef YYERROR_VERBOSE
-# define YYERROR_VERBOSE 1
-#else
-# define YYERROR_VERBOSE 0
-#endif
-
-/* Enabling the token table. */
-#ifndef YYTOKEN_TABLE
-# define YYTOKEN_TABLE 0
-#endif
-
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- T_MAINMENU = 258,
- T_MENU = 259,
- T_ENDMENU = 260,
- T_SOURCE = 261,
- T_CHOICE = 262,
- T_ENDCHOICE = 263,
- T_COMMENT = 264,
- T_CONFIG = 265,
- T_MENUCONFIG = 266,
- T_HELP = 267,
- T_HELPTEXT = 268,
- T_IF = 269,
- T_ENDIF = 270,
- T_DEPENDS = 271,
- T_OPTIONAL = 272,
- T_PROMPT = 273,
- T_TYPE = 274,
- T_DEFAULT = 275,
- T_SELECT = 276,
- T_RANGE = 277,
- T_VISIBLE = 278,
- T_OPTION = 279,
- T_ON = 280,
- T_WORD = 281,
- T_WORD_QUOTE = 282,
- T_UNEQUAL = 283,
- T_LESS = 284,
- T_LESS_EQUAL = 285,
- T_GREATER = 286,
- T_GREATER_EQUAL = 287,
- T_CLOSE_PAREN = 288,
- T_OPEN_PAREN = 289,
- T_EOL = 290,
- T_OR = 291,
- T_AND = 292,
- T_EQUAL = 293,
- T_NOT = 294
- };
-#endif
-
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-{
-
-
- char *string;
- struct file *file;
- struct symbol *symbol;
- struct expr *expr;
- struct menu *menu;
- const struct kconf_id *id;
-
-
-
-} YYSTYPE;
-# define YYSTYPE_IS_TRIVIAL 1
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-#endif
-
-
-/* Copy the second part of user declarations. */
-
-
-/* Include zconf.hash.c here so it can see the token constants. */
-#include "zconf.hash.c"
-
-
-
-#ifdef short
-# undef short
-#endif
-
-#ifdef YYTYPE_UINT8
-typedef YYTYPE_UINT8 yytype_uint8;
-#else
-typedef unsigned char yytype_uint8;
-#endif
-
-#ifdef YYTYPE_INT8
-typedef YYTYPE_INT8 yytype_int8;
-#elif (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-typedef signed char yytype_int8;
-#else
-typedef short int yytype_int8;
-#endif
-
-#ifdef YYTYPE_UINT16
-typedef YYTYPE_UINT16 yytype_uint16;
-#else
-typedef unsigned short int yytype_uint16;
-#endif
-
-#ifdef YYTYPE_INT16
-typedef YYTYPE_INT16 yytype_int16;
-#else
-typedef short int yytype_int16;
-#endif
-
-#ifndef YYSIZE_T
-# ifdef __SIZE_TYPE__
-# define YYSIZE_T __SIZE_TYPE__
-# elif defined size_t
-# define YYSIZE_T size_t
-# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-# define YYSIZE_T size_t
-# else
-# define YYSIZE_T unsigned int
-# endif
-#endif
-
-#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
-
-#ifndef YY_
-# if defined YYENABLE_NLS && YYENABLE_NLS
-# if ENABLE_NLS
-# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
-# define YY_(msgid) dgettext ("bison-runtime", msgid)
-# endif
-# endif
-# ifndef YY_
-# define YY_(msgid) msgid
-# endif
-#endif
-
-/* Suppress unused-variable warnings by "using" E. */
-#if ! defined lint || defined __GNUC__
-# define YYUSE(e) ((void) (e))
-#else
-# define YYUSE(e) /* empty */
-#endif
-
-/* Identity function, used to suppress warnings about constant conditions. */
-#ifndef lint
-# define YYID(n) (n)
-#else
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static int
-YYID (int yyi)
-#else
-static int
-YYID (yyi)
- int yyi;
-#endif
-{
- return yyi;
-}
-#endif
-
-#if ! defined yyoverflow || YYERROR_VERBOSE
-
-/* The parser invokes alloca or malloc; define the necessary symbols. */
-
-# ifdef YYSTACK_USE_ALLOCA
-# if YYSTACK_USE_ALLOCA
-# ifdef __GNUC__
-# define YYSTACK_ALLOC __builtin_alloca
-# elif defined __BUILTIN_VA_ARG_INCR
-# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
-# elif defined _AIX
-# define YYSTACK_ALLOC __alloca
-# elif defined _MSC_VER
-# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
-# define alloca _alloca
-# else
-# define YYSTACK_ALLOC alloca
-# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
- /* Use EXIT_SUCCESS as a witness for stdlib.h. */
-# ifndef EXIT_SUCCESS
-# define EXIT_SUCCESS 0
-# endif
-# endif
-# endif
-# endif
-# endif
-
-# ifdef YYSTACK_ALLOC
- /* Pacify GCC's `empty if-body' warning. */
-# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
-# ifndef YYSTACK_ALLOC_MAXIMUM
- /* The OS might guarantee only one guard page at the bottom of the stack,
- and a page size can be as small as 4096 bytes. So we cannot safely
- invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
- to allow for a few compiler-allocated temporary stack slots. */
-# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
-# endif
-# else
-# define YYSTACK_ALLOC YYMALLOC
-# define YYSTACK_FREE YYFREE
-# ifndef YYSTACK_ALLOC_MAXIMUM
-# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
-# endif
-# if (defined __cplusplus && ! defined EXIT_SUCCESS \
- && ! ((defined YYMALLOC || defined malloc) \
- && (defined YYFREE || defined free)))
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef EXIT_SUCCESS
-# define EXIT_SUCCESS 0
-# endif
-# endif
-# ifndef YYMALLOC
-# define YYMALLOC malloc
-# if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# ifndef YYFREE
-# define YYFREE free
-# if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void free (void *); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# endif
-#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
-
-
-#if (! defined yyoverflow \
- && (! defined __cplusplus \
- || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
-
-/* A type that is properly aligned for any stack member. */
-union yyalloc
-{
- yytype_int16 yyss_alloc;
- YYSTYPE yyvs_alloc;
-};
-
-/* The size of the maximum gap between one aligned stack and the next. */
-# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-
-/* The size of an array large to enough to hold all stacks, each with
- N elements. */
-# define YYSTACK_BYTES(N) \
- ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
- + YYSTACK_GAP_MAXIMUM)
-
-# define YYCOPY_NEEDED 1
-
-/* Relocate STACK from its old location to the new one. The
- local variables YYSIZE and YYSTACKSIZE give the old and new number of
- elements in the stack, and YYPTR gives the new location of the
- stack. Advance YYPTR to a properly aligned location for the next
- stack. */
-# define YYSTACK_RELOCATE(Stack_alloc, Stack) \
- do \
- { \
- YYSIZE_T yynewbytes; \
- YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \
- Stack = &yyptr->Stack_alloc; \
- yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
- yyptr += yynewbytes / sizeof (*yyptr); \
- } \
- while (YYID (0))
-
-#endif
-
-#if defined YYCOPY_NEEDED && YYCOPY_NEEDED
-/* Copy COUNT objects from SRC to DST. The source and destination do
- not overlap. */
-# ifndef YYCOPY
-# if defined __GNUC__ && 1 < __GNUC__
-# define YYCOPY(Dst, Src, Count) \
- __builtin_memcpy (Dst, Src, (Count) * sizeof (*(Src)))
-# else
-# define YYCOPY(Dst, Src, Count) \
- do \
- { \
- YYSIZE_T yyi; \
- for (yyi = 0; yyi < (Count); yyi++) \
- (Dst)[yyi] = (Src)[yyi]; \
- } \
- while (YYID (0))
-# endif
-# endif
-#endif /* !YYCOPY_NEEDED */
-
-/* YYFINAL -- State number of the termination state. */
-#define YYFINAL 11
-/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 298
-
-/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 40
-/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 50
-/* YYNRULES -- Number of rules. */
-#define YYNRULES 122
-/* YYNRULES -- Number of states. */
-#define YYNSTATES 199
-
-/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-#define YYUNDEFTOK 2
-#define YYMAXUTOK 294
-
-#define YYTRANSLATE(YYX) \
- ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-
-/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-static const yytype_uint8 yytranslate[] =
-{
- 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
- 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
- 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
- 35, 36, 37, 38, 39
-};
-
-#if YYDEBUG
-/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
- YYRHS. */
-static const yytype_uint16 yyprhs[] =
-{
- 0, 0, 3, 6, 8, 11, 13, 14, 17, 20,
- 23, 26, 31, 36, 40, 42, 44, 46, 48, 50,
- 52, 54, 56, 58, 60, 62, 64, 66, 68, 72,
- 75, 79, 82, 86, 89, 90, 93, 96, 99, 102,
- 105, 108, 112, 117, 122, 127, 133, 137, 138, 142,
- 143, 146, 150, 153, 155, 159, 160, 163, 166, 169,
- 172, 175, 180, 184, 187, 192, 193, 196, 200, 202,
- 206, 207, 210, 213, 216, 220, 224, 228, 230, 234,
- 235, 238, 241, 244, 248, 252, 255, 258, 261, 262,
- 265, 268, 271, 276, 277, 280, 283, 286, 287, 290,
- 292, 294, 297, 300, 303, 305, 308, 309, 312, 314,
- 318, 322, 326, 330, 334, 338, 342, 345, 349, 353,
- 355, 357, 358
-};
-
-/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-static const yytype_int8 yyrhs[] =
-{
- 41, 0, -1, 85, 42, -1, 42, -1, 67, 43,
- -1, 43, -1, -1, 43, 45, -1, 43, 59, -1,
- 43, 71, -1, 43, 84, -1, 43, 26, 1, 35,
- -1, 43, 44, 1, 35, -1, 43, 1, 35, -1,
- 16, -1, 18, -1, 19, -1, 21, -1, 17, -1,
- 22, -1, 20, -1, 23, -1, 35, -1, 65, -1,
- 75, -1, 48, -1, 50, -1, 73, -1, 26, 1,
- 35, -1, 1, 35, -1, 10, 26, 35, -1, 47,
- 51, -1, 11, 26, 35, -1, 49, 51, -1, -1,
- 51, 52, -1, 51, 53, -1, 51, 79, -1, 51,
- 77, -1, 51, 46, -1, 51, 35, -1, 19, 82,
- 35, -1, 18, 83, 86, 35, -1, 20, 87, 86,
- 35, -1, 21, 26, 86, 35, -1, 22, 88, 88,
- 86, 35, -1, 24, 54, 35, -1, -1, 54, 26,
- 55, -1, -1, 38, 83, -1, 7, 89, 35, -1,
- 56, 60, -1, 84, -1, 57, 62, 58, -1, -1,
- 60, 61, -1, 60, 79, -1, 60, 77, -1, 60,
- 35, -1, 60, 46, -1, 18, 83, 86, 35, -1,
- 19, 82, 35, -1, 17, 35, -1, 20, 26, 86,
- 35, -1, -1, 62, 45, -1, 14, 87, 85, -1,
- 84, -1, 63, 66, 64, -1, -1, 66, 45, -1,
- 66, 71, -1, 66, 59, -1, 3, 83, 85, -1,
- 4, 83, 35, -1, 68, 80, 78, -1, 84, -1,
- 69, 72, 70, -1, -1, 72, 45, -1, 72, 71,
- -1, 72, 59, -1, 6, 83, 35, -1, 9, 83,
- 35, -1, 74, 78, -1, 12, 35, -1, 76, 13,
- -1, -1, 78, 79, -1, 78, 35, -1, 78, 46,
- -1, 16, 25, 87, 35, -1, -1, 80, 81, -1,
- 80, 35, -1, 23, 86, -1, -1, 83, 86, -1,
- 26, -1, 27, -1, 5, 35, -1, 8, 35, -1,
- 15, 35, -1, 35, -1, 85, 35, -1, -1, 14,
- 87, -1, 88, -1, 88, 29, 88, -1, 88, 30,
- 88, -1, 88, 31, 88, -1, 88, 32, 88, -1,
- 88, 38, 88, -1, 88, 28, 88, -1, 34, 87,
- 33, -1, 39, 87, -1, 87, 36, 87, -1, 87,
- 37, 87, -1, 26, -1, 27, -1, -1, 26, -1
-};
-
-/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-static const yytype_uint16 yyrline[] =
-{
- 0, 108, 108, 108, 110, 110, 112, 114, 115, 116,
- 117, 118, 119, 123, 127, 127, 127, 127, 127, 127,
- 127, 127, 131, 132, 133, 134, 135, 136, 140, 141,
- 147, 155, 161, 169, 179, 181, 182, 183, 184, 185,
- 186, 189, 197, 203, 213, 219, 225, 228, 230, 241,
- 242, 247, 256, 261, 269, 272, 274, 275, 276, 277,
- 278, 281, 287, 298, 304, 314, 316, 321, 329, 337,
- 340, 342, 343, 344, 349, 356, 363, 368, 376, 379,
- 381, 382, 383, 386, 394, 401, 408, 414, 421, 423,
- 424, 425, 428, 436, 438, 439, 442, 449, 451, 456,
- 457, 460, 461, 462, 466, 467, 470, 471, 474, 475,
- 476, 477, 478, 479, 480, 481, 482, 483, 484, 487,
- 488, 491, 492
-};
-#endif
-
-#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
-/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
- First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-static const char *const yytname[] =
-{
- "$end", "error", "$undefined", "T_MAINMENU", "T_MENU", "T_ENDMENU",
- "T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG",
- "T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS",
- "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE",
- "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
- "T_LESS", "T_LESS_EQUAL", "T_GREATER", "T_GREATER_EQUAL",
- "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL",
- "T_NOT", "$accept", "input", "start", "stmt_list", "option_name",
- "common_stmt", "option_error", "config_entry_start", "config_stmt",
- "menuconfig_entry_start", "menuconfig_stmt", "config_option_list",
- "config_option", "symbol_option", "symbol_option_list",
- "symbol_option_arg", "choice", "choice_entry", "choice_end",
- "choice_stmt", "choice_option_list", "choice_option", "choice_block",
- "if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu",
- "menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt",
- "comment", "comment_stmt", "help_start", "help", "depends_list",
- "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt",
- "end", "nl", "if_expr", "expr", "symbol", "word_opt", YY_NULL
-};
-#endif
-
-# ifdef YYPRINT
-/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
- token YYLEX-NUM. */
-static const yytype_uint16 yytoknum[] =
-{
- 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
- 265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
- 275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
- 285, 286, 287, 288, 289, 290, 291, 292, 293, 294
-};
-# endif
-
-/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-static const yytype_uint8 yyr1[] =
-{
- 0, 40, 41, 41, 42, 42, 43, 43, 43, 43,
- 43, 43, 43, 43, 44, 44, 44, 44, 44, 44,
- 44, 44, 45, 45, 45, 45, 45, 45, 46, 46,
- 47, 48, 49, 50, 51, 51, 51, 51, 51, 51,
- 51, 52, 52, 52, 52, 52, 53, 54, 54, 55,
- 55, 56, 57, 58, 59, 60, 60, 60, 60, 60,
- 60, 61, 61, 61, 61, 62, 62, 63, 64, 65,
- 66, 66, 66, 66, 67, 68, 69, 70, 71, 72,
- 72, 72, 72, 73, 74, 75, 76, 77, 78, 78,
- 78, 78, 79, 80, 80, 80, 81, 82, 82, 83,
- 83, 84, 84, 84, 85, 85, 86, 86, 87, 87,
- 87, 87, 87, 87, 87, 87, 87, 87, 87, 88,
- 88, 89, 89
-};
-
-/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-static const yytype_uint8 yyr2[] =
-{
- 0, 2, 2, 1, 2, 1, 0, 2, 2, 2,
- 2, 4, 4, 3, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 3, 2,
- 3, 2, 3, 2, 0, 2, 2, 2, 2, 2,
- 2, 3, 4, 4, 4, 5, 3, 0, 3, 0,
- 2, 3, 2, 1, 3, 0, 2, 2, 2, 2,
- 2, 4, 3, 2, 4, 0, 2, 3, 1, 3,
- 0, 2, 2, 2, 3, 3, 3, 1, 3, 0,
- 2, 2, 2, 3, 3, 2, 2, 2, 0, 2,
- 2, 2, 4, 0, 2, 2, 2, 0, 2, 1,
- 1, 2, 2, 2, 1, 2, 0, 2, 1, 3,
- 3, 3, 3, 3, 3, 3, 2, 3, 3, 1,
- 1, 0, 1
-};
-
-/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM.
- Performed when YYTABLE doesn't specify something else to do. Zero
- means the default is an error. */
-static const yytype_uint8 yydefact[] =
-{
- 6, 0, 104, 0, 3, 0, 6, 6, 99, 100,
- 0, 1, 0, 0, 0, 0, 121, 0, 0, 0,
- 0, 0, 0, 14, 18, 15, 16, 20, 17, 19,
- 21, 0, 22, 0, 7, 34, 25, 34, 26, 55,
- 65, 8, 70, 23, 93, 79, 9, 27, 88, 24,
- 10, 0, 105, 2, 74, 13, 0, 101, 0, 122,
- 0, 102, 0, 0, 0, 119, 120, 0, 0, 0,
- 108, 103, 0, 0, 0, 0, 0, 0, 0, 88,
- 0, 0, 75, 83, 51, 84, 30, 32, 0, 116,
- 0, 0, 67, 0, 0, 0, 0, 0, 0, 11,
- 12, 0, 0, 0, 0, 97, 0, 0, 0, 47,
- 0, 40, 39, 35, 36, 0, 38, 37, 0, 0,
- 97, 0, 59, 60, 56, 58, 57, 66, 54, 53,
- 71, 73, 69, 72, 68, 106, 95, 0, 94, 80,
- 82, 78, 81, 77, 90, 91, 89, 115, 117, 118,
- 114, 109, 110, 111, 112, 113, 29, 86, 0, 106,
- 0, 106, 106, 106, 0, 0, 0, 87, 63, 106,
- 0, 106, 0, 96, 0, 0, 41, 98, 0, 0,
- 106, 49, 46, 28, 0, 62, 0, 107, 92, 42,
- 43, 44, 0, 0, 48, 61, 64, 45, 50
-};
-
-/* YYDEFGOTO[NTERM-NUM]. */
-static const yytype_int16 yydefgoto[] =
-{
- -1, 3, 4, 5, 33, 34, 112, 35, 36, 37,
- 38, 74, 113, 114, 165, 194, 39, 40, 128, 41,
- 76, 124, 77, 42, 132, 43, 78, 6, 44, 45,
- 141, 46, 80, 47, 48, 49, 115, 116, 81, 117,
- 79, 138, 160, 161, 50, 7, 173, 69, 70, 60
-};
-
-/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
- STATE-NUM. */
-#define YYPACT_NINF -91
-static const yytype_int16 yypact[] =
-{
- 19, 37, -91, 13, -91, 79, -91, 20, -91, -91,
- -16, -91, 21, 37, 25, 37, 41, 36, 37, 78,
- 83, 31, 56, -91, -91, -91, -91, -91, -91, -91,
- -91, 116, -91, 127, -91, -91, -91, -91, -91, -91,
- -91, -91, -91, -91, -91, -91, -91, -91, -91, -91,
- -91, 147, -91, -91, 105, -91, 109, -91, 111, -91,
- 114, -91, 136, 137, 142, -91, -91, 31, 31, 76,
- 254, -91, 143, 146, 27, 115, 207, 258, 243, -14,
- 243, 179, -91, -91, -91, -91, -91, -91, -7, -91,
- 31, 31, 105, 51, 51, 51, 51, 51, 51, -91,
- -91, 156, 168, 181, 37, 37, 31, 178, 51, -91,
- 206, -91, -91, -91, -91, 196, -91, -91, 175, 37,
- 37, 185, -91, -91, -91, -91, -91, -91, -91, -91,
- -91, -91, -91, -91, -91, 214, -91, 230, -91, -91,
- -91, -91, -91, -91, -91, -91, -91, -91, 183, -91,
- -91, -91, -91, -91, -91, -91, -91, -91, 31, 214,
- 194, 214, 45, 214, 51, 26, 195, -91, -91, 214,
- 197, 214, 31, -91, 139, 208, -91, -91, 220, 224,
- 214, 222, -91, -91, 226, -91, 227, 123, -91, -91,
- -91, -91, 235, 37, -91, -91, -91, -91, -91
-};
-
-/* YYPGOTO[NTERM-NUM]. */
-static const yytype_int16 yypgoto[] =
-{
- -91, -91, 264, 268, -91, 30, -65, -91, -91, -91,
- -91, 238, -91, -91, -91, -91, -91, -91, -91, -12,
- -91, -91, -91, -91, -91, -91, -91, -91, -91, -91,
- -91, -5, -91, -91, -91, -91, -91, 200, 209, -61,
- -91, -91, 170, -1, 65, 0, 118, -66, -90, -91
-};
-
-/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
- positive, shift that token. If negative, reduce the rule which
- number is the opposite. If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -86
-static const yytype_int16 yytable[] =
-{
- 10, 88, 89, 150, 151, 152, 153, 154, 155, 135,
- 54, 123, 56, 11, 58, 126, 145, 62, 164, 2,
- 146, 136, 1, 1, 148, 149, 147, -31, 101, 90,
- 91, -31, -31, -31, -31, -31, -31, -31, -31, 102,
- 162, -31, -31, 103, -31, 104, 105, 106, 107, 108,
- -31, 109, 181, 110, 2, 52, 55, 65, 66, 172,
- 57, 182, 111, 8, 9, 67, 131, 59, 140, 92,
- 68, 61, 145, 133, 180, 142, 146, 65, 66, -5,
- 12, 90, 91, 13, 14, 15, 16, 17, 18, 19,
- 20, 71, 174, 21, 22, 23, 24, 25, 26, 27,
- 28, 29, 30, 159, 63, 31, 187, 127, 130, 64,
- 139, 2, 90, 91, 32, -33, 101, 72, 169, -33,
- -33, -33, -33, -33, -33, -33, -33, 102, 73, -33,
- -33, 103, -33, 104, 105, 106, 107, 108, -33, 109,
- 52, 110, 129, 134, 82, 143, 83, -4, 12, 84,
- 111, 13, 14, 15, 16, 17, 18, 19, 20, 90,
- 91, 21, 22, 23, 24, 25, 26, 27, 28, 29,
- 30, 85, 86, 31, 188, 90, 91, 87, 99, -85,
- 101, 100, 32, -85, -85, -85, -85, -85, -85, -85,
- -85, 156, 198, -85, -85, 103, -85, -85, -85, -85,
- -85, -85, -85, 157, 163, 110, 158, 166, 101, 167,
- 168, 171, -52, -52, 144, -52, -52, -52, -52, 102,
- 91, -52, -52, 103, 118, 119, 120, 121, 172, 176,
- 183, 101, 185, 110, -76, -76, -76, -76, -76, -76,
- -76, -76, 122, 189, -76, -76, 103, 13, 14, 15,
- 16, 17, 18, 19, 20, 190, 110, 21, 22, 191,
- 193, 195, 196, 14, 15, 144, 17, 18, 19, 20,
- 197, 53, 21, 22, 51, 75, 125, 175, 32, 177,
- 178, 179, 93, 94, 95, 96, 97, 184, 137, 186,
- 170, 0, 98, 32, 0, 0, 0, 0, 192
-};
-
-#define yypact_value_is_default(yystate) \
- ((yystate) == (-91))
-
-#define yytable_value_is_error(yytable_value) \
- YYID (0)
-
-static const yytype_int16 yycheck[] =
-{
- 1, 67, 68, 93, 94, 95, 96, 97, 98, 23,
- 10, 76, 13, 0, 15, 76, 81, 18, 108, 35,
- 81, 35, 3, 3, 90, 91, 33, 0, 1, 36,
- 37, 4, 5, 6, 7, 8, 9, 10, 11, 12,
- 106, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 23, 24, 26, 26, 35, 35, 35, 26, 27, 14,
- 35, 35, 35, 26, 27, 34, 78, 26, 80, 69,
- 39, 35, 137, 78, 164, 80, 137, 26, 27, 0,
- 1, 36, 37, 4, 5, 6, 7, 8, 9, 10,
- 11, 35, 158, 14, 15, 16, 17, 18, 19, 20,
- 21, 22, 23, 104, 26, 26, 172, 77, 78, 26,
- 80, 35, 36, 37, 35, 0, 1, 1, 119, 4,
- 5, 6, 7, 8, 9, 10, 11, 12, 1, 14,
- 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
- 35, 26, 77, 78, 35, 80, 35, 0, 1, 35,
- 35, 4, 5, 6, 7, 8, 9, 10, 11, 36,
- 37, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 23, 35, 35, 26, 35, 36, 37, 35, 35, 0,
- 1, 35, 35, 4, 5, 6, 7, 8, 9, 10,
- 11, 35, 193, 14, 15, 16, 17, 18, 19, 20,
- 21, 22, 23, 35, 26, 26, 25, 1, 1, 13,
- 35, 26, 5, 6, 35, 8, 9, 10, 11, 12,
- 37, 14, 15, 16, 17, 18, 19, 20, 14, 35,
- 35, 1, 35, 26, 4, 5, 6, 7, 8, 9,
- 10, 11, 35, 35, 14, 15, 16, 4, 5, 6,
- 7, 8, 9, 10, 11, 35, 26, 14, 15, 35,
- 38, 35, 35, 5, 6, 35, 8, 9, 10, 11,
- 35, 7, 14, 15, 6, 37, 76, 159, 35, 161,
- 162, 163, 28, 29, 30, 31, 32, 169, 79, 171,
- 120, -1, 38, 35, -1, -1, -1, -1, 180
-};
-
-/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
- symbol of state STATE-NUM. */
-static const yytype_uint8 yystos[] =
-{
- 0, 3, 35, 41, 42, 43, 67, 85, 26, 27,
- 83, 0, 1, 4, 5, 6, 7, 8, 9, 10,
- 11, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 23, 26, 35, 44, 45, 47, 48, 49, 50, 56,
- 57, 59, 63, 65, 68, 69, 71, 73, 74, 75,
- 84, 43, 35, 42, 85, 35, 83, 35, 83, 26,
- 89, 35, 83, 26, 26, 26, 27, 34, 39, 87,
- 88, 35, 1, 1, 51, 51, 60, 62, 66, 80,
- 72, 78, 35, 35, 35, 35, 35, 35, 87, 87,
- 36, 37, 85, 28, 29, 30, 31, 32, 38, 35,
- 35, 1, 12, 16, 18, 19, 20, 21, 22, 24,
- 26, 35, 46, 52, 53, 76, 77, 79, 17, 18,
- 19, 20, 35, 46, 61, 77, 79, 45, 58, 84,
- 45, 59, 64, 71, 84, 23, 35, 78, 81, 45,
- 59, 70, 71, 84, 35, 46, 79, 33, 87, 87,
- 88, 88, 88, 88, 88, 88, 35, 35, 25, 83,
- 82, 83, 87, 26, 88, 54, 1, 13, 35, 83,
- 82, 26, 14, 86, 87, 86, 35, 86, 86, 86,
- 88, 26, 35, 35, 86, 35, 86, 87, 35, 35,
- 35, 35, 86, 38, 55, 35, 35, 35, 83
-};
-
-#define yyerrok (yyerrstatus = 0)
-#define yyclearin (yychar = YYEMPTY)
-#define YYEMPTY (-2)
-#define YYEOF 0
-
-#define YYACCEPT goto yyacceptlab
-#define YYABORT goto yyabortlab
-#define YYERROR goto yyerrorlab
-
-
-/* Like YYERROR except do call yyerror. This remains here temporarily
- to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. However,
- YYFAIL appears to be in use. Nevertheless, it is formally deprecated
- in Bison 2.4.2's NEWS entry, where a plan to phase it out is
- discussed. */
-
-#define YYFAIL goto yyerrlab
-#if defined YYFAIL
- /* This is here to suppress warnings from the GCC cpp's
- -Wunused-macros. Normally we don't worry about that warning, but
- some users do, and we want to make it easy for users to remove
- YYFAIL uses, which will produce warnings from Bison 2.5. */
-#endif
-
-#define YYRECOVERING() (!!yyerrstatus)
-
-#define YYBACKUP(Token, Value) \
-do \
- if (yychar == YYEMPTY) \
- { \
- yychar = (Token); \
- yylval = (Value); \
- YYPOPSTACK (yylen); \
- yystate = *yyssp; \
- goto yybackup; \
- } \
- else \
- { \
- yyerror (YY_("syntax error: cannot back up")); \
- YYERROR; \
- } \
-while (YYID (0))
-
-
-#define YYTERROR 1
-#define YYERRCODE 256
-
-
-/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
- If N is 0, then set CURRENT to the empty location which ends
- the previous symbol: RHS[0] (always defined). */
-
-#define YYRHSLOC(Rhs, K) ((Rhs)[K])
-#ifndef YYLLOC_DEFAULT
-# define YYLLOC_DEFAULT(Current, Rhs, N) \
- do \
- if (YYID (N)) \
- { \
- (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
- (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
- (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
- (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
- } \
- else \
- { \
- (Current).first_line = (Current).last_line = \
- YYRHSLOC (Rhs, 0).last_line; \
- (Current).first_column = (Current).last_column = \
- YYRHSLOC (Rhs, 0).last_column; \
- } \
- while (YYID (0))
-#endif
-
-
-/* This macro is provided for backward compatibility. */
-
-#ifndef YY_LOCATION_PRINT
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-#endif
-
-
-/* YYLEX -- calling `yylex' with the right arguments. */
-
-#ifdef YYLEX_PARAM
-# define YYLEX yylex (YYLEX_PARAM)
-#else
-# define YYLEX yylex ()
-#endif
-
-/* Enable debugging if requested. */
-#if YYDEBUG
-
-# ifndef YYFPRINTF
-# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-# define YYFPRINTF fprintf
-# endif
-
-# define YYDPRINTF(Args) \
-do { \
- if (yydebug) \
- YYFPRINTF Args; \
-} while (YYID (0))
-
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
-do { \
- if (yydebug) \
- { \
- YYFPRINTF (stderr, "%s ", Title); \
- yy_symbol_print (stderr, \
- Type, Value); \
- YYFPRINTF (stderr, "\n"); \
- } \
-} while (YYID (0))
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
-#else
-static void
-yy_symbol_value_print (yyoutput, yytype, yyvaluep)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
-#endif
-{
- FILE *yyo = yyoutput;
- YYUSE (yyo);
- if (!yyvaluep)
- return;
-# ifdef YYPRINT
- if (yytype < YYNTOKENS)
- YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-# else
- YYUSE (yyoutput);
-# endif
- switch (yytype)
- {
- default:
- break;
- }
-}
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
-#else
-static void
-yy_symbol_print (yyoutput, yytype, yyvaluep)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
-#endif
-{
- if (yytype < YYNTOKENS)
- YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
- else
- YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-
- yy_symbol_value_print (yyoutput, yytype, yyvaluep);
- YYFPRINTF (yyoutput, ")");
-}
-
-/*------------------------------------------------------------------.
-| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-| TOP (included). |
-`------------------------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop)
-#else
-static void
-yy_stack_print (yybottom, yytop)
- yytype_int16 *yybottom;
- yytype_int16 *yytop;
-#endif
-{
- YYFPRINTF (stderr, "Stack now");
- for (; yybottom <= yytop; yybottom++)
- {
- int yybot = *yybottom;
- YYFPRINTF (stderr, " %d", yybot);
- }
- YYFPRINTF (stderr, "\n");
-}
-
-# define YY_STACK_PRINT(Bottom, Top) \
-do { \
- if (yydebug) \
- yy_stack_print ((Bottom), (Top)); \
-} while (YYID (0))
-
-
-/*------------------------------------------------.
-| Report that the YYRULE is going to be reduced. |
-`------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_reduce_print (YYSTYPE *yyvsp, int yyrule)
-#else
-static void
-yy_reduce_print (yyvsp, yyrule)
- YYSTYPE *yyvsp;
- int yyrule;
-#endif
-{
- int yynrhs = yyr2[yyrule];
- int yyi;
- unsigned long int yylno = yyrline[yyrule];
- YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
- yyrule - 1, yylno);
- /* The symbols being reduced. */
- for (yyi = 0; yyi < yynrhs; yyi++)
- {
- YYFPRINTF (stderr, " $%d = ", yyi + 1);
- yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
- &(yyvsp[(yyi + 1) - (yynrhs)])
- );
- YYFPRINTF (stderr, "\n");
- }
-}
-
-# define YY_REDUCE_PRINT(Rule) \
-do { \
- if (yydebug) \
- yy_reduce_print (yyvsp, Rule); \
-} while (YYID (0))
-
-/* Nonzero means print parse trace. It is left uninitialized so that
- multiple parsers can coexist. */
-int yydebug;
-#else /* !YYDEBUG */
-# define YYDPRINTF(Args)
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
-# define YY_STACK_PRINT(Bottom, Top)
-# define YY_REDUCE_PRINT(Rule)
-#endif /* !YYDEBUG */
-
-
-/* YYINITDEPTH -- initial size of the parser's stacks. */
-#ifndef YYINITDEPTH
-# define YYINITDEPTH 200
-#endif
-
-/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
- if the built-in stack extension method is used).
-
- Do not make this value too large; the results are undefined if
- YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
- evaluated with infinite-precision integer arithmetic. */
-
-#ifndef YYMAXDEPTH
-# define YYMAXDEPTH 10000
-#endif
-
-
-#if YYERROR_VERBOSE
-
-# ifndef yystrlen
-# if defined __GLIBC__ && defined _STRING_H
-# define yystrlen strlen
-# else
-/* Return the length of YYSTR. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static YYSIZE_T
-yystrlen (const char *yystr)
-#else
-static YYSIZE_T
-yystrlen (yystr)
- const char *yystr;
-#endif
-{
- YYSIZE_T yylen;
- for (yylen = 0; yystr[yylen]; yylen++)
- continue;
- return yylen;
-}
-# endif
-# endif
-
-# ifndef yystpcpy
-# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
-# define yystpcpy stpcpy
-# else
-/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
- YYDEST. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static char *
-yystpcpy (char *yydest, const char *yysrc)
-#else
-static char *
-yystpcpy (yydest, yysrc)
- char *yydest;
- const char *yysrc;
-#endif
-{
- char *yyd = yydest;
- const char *yys = yysrc;
-
- while ((*yyd++ = *yys++) != '\0')
- continue;
-
- return yyd - 1;
-}
-# endif
-# endif
-
-# ifndef yytnamerr
-/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
- quotes and backslashes, so that it's suitable for yyerror. The
- heuristic is that double-quoting is unnecessary unless the string
- contains an apostrophe, a comma, or backslash (other than
- backslash-backslash). YYSTR is taken from yytname. If YYRES is
- null, do not copy; instead, return the length of what the result
- would have been. */
-static YYSIZE_T
-yytnamerr (char *yyres, const char *yystr)
-{
- if (*yystr == '"')
- {
- YYSIZE_T yyn = 0;
- char const *yyp = yystr;
-
- for (;;)
- switch (*++yyp)
- {
- case '\'':
- case ',':
- goto do_not_strip_quotes;
-
- case '\\':
- if (*++yyp != '\\')
- goto do_not_strip_quotes;
- /* Fall through. */
- default:
- if (yyres)
- yyres[yyn] = *yyp;
- yyn++;
- break;
-
- case '"':
- if (yyres)
- yyres[yyn] = '\0';
- return yyn;
- }
- do_not_strip_quotes: ;
- }
-
- if (! yyres)
- return yystrlen (yystr);
-
- return yystpcpy (yyres, yystr) - yyres;
-}
-# endif
-
-/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message
- about the unexpected token YYTOKEN for the state stack whose top is
- YYSSP.
-
- Return 0 if *YYMSG was successfully written. Return 1 if *YYMSG is
- not large enough to hold the message. In that case, also set
- *YYMSG_ALLOC to the required number of bytes. Return 2 if the
- required number of bytes is too large to store. */
-static int
-yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg,
- yytype_int16 *yyssp, int yytoken)
-{
- YYSIZE_T yysize0 = yytnamerr (YY_NULL, yytname[yytoken]);
- YYSIZE_T yysize = yysize0;
- YYSIZE_T yysize1;
- enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
- /* Internationalized format string. */
- const char *yyformat = YY_NULL;
- /* Arguments of yyformat. */
- char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
- /* Number of reported tokens (one for the "unexpected", one per
- "expected"). */
- int yycount = 0;
-
- /* There are many possibilities here to consider:
- - Assume YYFAIL is not used. It's too flawed to consider. See
- <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html>
- for details. YYERROR is fine as it does not invoke this
- function.
- - If this state is a consistent state with a default action, then
- the only way this function was invoked is if the default action
- is an error action. In that case, don't check for expected
- tokens because there are none.
- - The only way there can be no lookahead present (in yychar) is if
- this state is a consistent state with a default action. Thus,
- detecting the absence of a lookahead is sufficient to determine
- that there is no unexpected or expected token to report. In that
- case, just report a simple "syntax error".
- - Don't assume there isn't a lookahead just because this state is a
- consistent state with a default action. There might have been a
- previous inconsistent state, consistent state with a non-default
- action, or user semantic action that manipulated yychar.
- - Of course, the expected token list depends on states to have
- correct lookahead information, and it depends on the parser not
- to perform extra reductions after fetching a lookahead from the
- scanner and before detecting a syntax error. Thus, state merging
- (from LALR or IELR) and default reductions corrupt the expected
- token list. However, the list is correct for canonical LR with
- one exception: it will still contain any token that will not be
- accepted due to an error action in a later state.
- */
- if (yytoken != YYEMPTY)
- {
- int yyn = yypact[*yyssp];
- yyarg[yycount++] = yytname[yytoken];
- if (!yypact_value_is_default (yyn))
- {
- /* Start YYX at -YYN if negative to avoid negative indexes in
- YYCHECK. In other words, skip the first -YYN actions for
- this state because they are default actions. */
- int yyxbegin = yyn < 0 ? -yyn : 0;
- /* Stay within bounds of both yycheck and yytname. */
- int yychecklim = YYLAST - yyn + 1;
- int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
- int yyx;
-
- for (yyx = yyxbegin; yyx < yyxend; ++yyx)
- if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR
- && !yytable_value_is_error (yytable[yyx + yyn]))
- {
- if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
- {
- yycount = 1;
- yysize = yysize0;
- break;
- }
- yyarg[yycount++] = yytname[yyx];
- yysize1 = yysize + yytnamerr (YY_NULL, yytname[yyx]);
- if (! (yysize <= yysize1
- && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
- return 2;
- yysize = yysize1;
- }
- }
- }
-
- switch (yycount)
- {
-# define YYCASE_(N, S) \
- case N: \
- yyformat = S; \
- break
- YYCASE_(0, YY_("syntax error"));
- YYCASE_(1, YY_("syntax error, unexpected %s"));
- YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s"));
- YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s"));
- YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s"));
- YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"));
-# undef YYCASE_
- }
-
- yysize1 = yysize + yystrlen (yyformat);
- if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
- return 2;
- yysize = yysize1;
-
- if (*yymsg_alloc < yysize)
- {
- *yymsg_alloc = 2 * yysize;
- if (! (yysize <= *yymsg_alloc
- && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM))
- *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM;
- return 1;
- }
-
- /* Avoid sprintf, as that infringes on the user's name space.
- Don't have undefined behavior even if the translation
- produced a string with the wrong number of "%s"s. */
- {
- char *yyp = *yymsg;
- int yyi = 0;
- while ((*yyp = *yyformat) != '\0')
- if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount)
- {
- yyp += yytnamerr (yyp, yyarg[yyi++]);
- yyformat += 2;
- }
- else
- {
- yyp++;
- yyformat++;
- }
- }
- return 0;
-}
-#endif /* YYERROR_VERBOSE */
-
-/*-----------------------------------------------.
-| Release the memory associated to this symbol. |
-`-----------------------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep)
-#else
-static void
-yydestruct (yymsg, yytype, yyvaluep)
- const char *yymsg;
- int yytype;
- YYSTYPE *yyvaluep;
-#endif
-{
- YYUSE (yyvaluep);
-
- if (!yymsg)
- yymsg = "Deleting";
- YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
-
- switch (yytype)
- {
- case 57: /* "choice_entry" */
-
- {
- fprintf(stderr, "%s:%d: missing end statement for this entry\n",
- (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno);
- if (current_menu == (yyvaluep->menu))
- menu_end_menu();
-};
-
- break;
- case 63: /* "if_entry" */
-
- {
- fprintf(stderr, "%s:%d: missing end statement for this entry\n",
- (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno);
- if (current_menu == (yyvaluep->menu))
- menu_end_menu();
-};
-
- break;
- case 69: /* "menu_entry" */
-
- {
- fprintf(stderr, "%s:%d: missing end statement for this entry\n",
- (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno);
- if (current_menu == (yyvaluep->menu))
- menu_end_menu();
-};
-
- break;
-
- default:
- break;
- }
-}
-
-
-/* Prevent warnings from -Wmissing-prototypes. */
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void *YYPARSE_PARAM);
-#else
-int yyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void);
-#else
-int yyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-
-/* The lookahead symbol. */
-int yychar;
-
-/* The semantic value of the lookahead symbol. */
-YYSTYPE yylval;
-
-/* Number of syntax errors so far. */
-int yynerrs;
-
-
-/*----------.
-| yyparse. |
-`----------*/
-
-#ifdef YYPARSE_PARAM
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void *YYPARSE_PARAM)
-#else
-int
-yyparse (YYPARSE_PARAM)
- void *YYPARSE_PARAM;
-#endif
-#else /* ! YYPARSE_PARAM */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void)
-#else
-int
-yyparse ()
-
-#endif
-#endif
-{
- int yystate;
- /* Number of tokens to shift before error messages enabled. */
- int yyerrstatus;
-
- /* The stacks and their tools:
- `yyss': related to states.
- `yyvs': related to semantic values.
-
- Refer to the stacks through separate pointers, to allow yyoverflow
- to reallocate them elsewhere. */
-
- /* The state stack. */
- yytype_int16 yyssa[YYINITDEPTH];
- yytype_int16 *yyss;
- yytype_int16 *yyssp;
-
- /* The semantic value stack. */
- YYSTYPE yyvsa[YYINITDEPTH];
- YYSTYPE *yyvs;
- YYSTYPE *yyvsp;
-
- YYSIZE_T yystacksize;
-
- int yyn;
- int yyresult;
- /* Lookahead token as an internal (translated) token number. */
- int yytoken;
- /* The variables used to return semantic value and location from the
- action routines. */
- YYSTYPE yyval;
-
-#if YYERROR_VERBOSE
- /* Buffer for error messages, and its allocated size. */
- char yymsgbuf[128];
- char *yymsg = yymsgbuf;
- YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
-#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N))
-
- /* The number of symbols on the RHS of the reduced rule.
- Keep to zero when no symbol should be popped. */
- int yylen = 0;
-
- yytoken = 0;
- yyss = yyssa;
- yyvs = yyvsa;
- yystacksize = YYINITDEPTH;
-
- YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
- yynerrs = 0;
- yychar = YYEMPTY; /* Cause a token to be read. */
-
- /* Initialize stack pointers.
- Waste one element of value and location stack
- so that they stay on the same level as the state stack.
- The wasted elements are never initialized. */
- yyssp = yyss;
- yyvsp = yyvs;
-
- goto yysetstate;
-
-/*------------------------------------------------------------.
-| yynewstate -- Push a new state, which is found in yystate. |
-`------------------------------------------------------------*/
- yynewstate:
- /* In all cases, when you get here, the value and location stacks
- have just been pushed. So pushing a state here evens the stacks. */
- yyssp++;
-
- yysetstate:
- *yyssp = yystate;
-
- if (yyss + yystacksize - 1 <= yyssp)
- {
- /* Get the current used size of the three stacks, in elements. */
- YYSIZE_T yysize = yyssp - yyss + 1;
-
-#ifdef yyoverflow
- {
- /* Give user a chance to reallocate the stack. Use copies of
- these so that the &'s don't force the real ones into
- memory. */
- YYSTYPE *yyvs1 = yyvs;
- yytype_int16 *yyss1 = yyss;
-
- /* Each stack pointer address is followed by the size of the
- data in use in that stack, in bytes. This used to be a
- conditional around just the two extra args, but that might
- be undefined if yyoverflow is a macro. */
- yyoverflow (YY_("memory exhausted"),
- &yyss1, yysize * sizeof (*yyssp),
- &yyvs1, yysize * sizeof (*yyvsp),
- &yystacksize);
-
- yyss = yyss1;
- yyvs = yyvs1;
- }
-#else /* no yyoverflow */
-# ifndef YYSTACK_RELOCATE
- goto yyexhaustedlab;
-# else
- /* Extend the stack our own way. */
- if (YYMAXDEPTH <= yystacksize)
- goto yyexhaustedlab;
- yystacksize *= 2;
- if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
-
- {
- yytype_int16 *yyss1 = yyss;
- union yyalloc *yyptr =
- (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
- if (! yyptr)
- goto yyexhaustedlab;
- YYSTACK_RELOCATE (yyss_alloc, yyss);
- YYSTACK_RELOCATE (yyvs_alloc, yyvs);
-# undef YYSTACK_RELOCATE
- if (yyss1 != yyssa)
- YYSTACK_FREE (yyss1);
- }
-# endif
-#endif /* no yyoverflow */
-
- yyssp = yyss + yysize - 1;
- yyvsp = yyvs + yysize - 1;
-
- YYDPRINTF ((stderr, "Stack size increased to %lu\n",
- (unsigned long int) yystacksize));
-
- if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
- YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- if (yystate == YYFINAL)
- YYACCEPT;
-
- goto yybackup;
-
-/*-----------.
-| yybackup. |
-`-----------*/
-yybackup:
-
- /* Do appropriate processing given the current state. Read a
- lookahead token if we need one and don't already have one. */
-
- /* First try to decide what to do without reference to lookahead token. */
- yyn = yypact[yystate];
- if (yypact_value_is_default (yyn))
- goto yydefault;
-
- /* Not known => get a lookahead token if don't already have one. */
-
- /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
- if (yychar == YYEMPTY)
- {
- YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
-
- if (yychar <= YYEOF)
- {
- yychar = yytoken = YYEOF;
- YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
- {
- yytoken = YYTRANSLATE (yychar);
- YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
- }
-
- /* If the proper action on seeing token YYTOKEN is to reduce or to
- detect an error, take that action. */
- yyn += yytoken;
- if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
- yyn = yytable[yyn];
- if (yyn <= 0)
- {
- if (yytable_value_is_error (yyn))
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
- }
-
- /* Count tokens shifted since error; after three, turn off error
- status. */
- if (yyerrstatus)
- yyerrstatus--;
-
- /* Shift the lookahead token. */
- YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
-
- /* Discard the shifted token. */
- yychar = YYEMPTY;
-
- yystate = yyn;
- *++yyvsp = yylval;
-
- goto yynewstate;
-
-
-/*-----------------------------------------------------------.
-| yydefault -- do the default action for the current state. |
-`-----------------------------------------------------------*/
-yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
- goto yyreduce;
-
-
-/*-----------------------------.
-| yyreduce -- Do a reduction. |
-`-----------------------------*/
-yyreduce:
- /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-
- /* If YYLEN is nonzero, implement the default value of the action:
- `$$ = $1'.
-
- Otherwise, the following line sets YYVAL to garbage.
- This behavior is undocumented and Bison
- users should not rely upon it. Assigning to YYVAL
- unconditionally makes the parser a bit smaller, and it avoids a
- GCC warning that YYVAL may be used uninitialized. */
- yyval = yyvsp[1-yylen];
-
-
- YY_REDUCE_PRINT (yyn);
- switch (yyn)
- {
- case 10:
-
- { zconf_error("unexpected end statement"); }
- break;
-
- case 11:
-
- { zconf_error("unknown statement \"%s\"", (yyvsp[(2) - (4)].string)); }
- break;
-
- case 12:
-
- {
- zconf_error("unexpected option \"%s\"", kconf_id_strings + (yyvsp[(2) - (4)].id)->name);
-}
- break;
-
- case 13:
-
- { zconf_error("invalid statement"); }
- break;
-
- case 28:
-
- { zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); }
- break;
-
- case 29:
-
- { zconf_error("invalid option"); }
- break;
-
- case 30:
-
- {
- struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
- sym->flags |= SYMBOL_OPTIONAL;
- menu_add_entry(sym);
- printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
-}
- break;
-
- case 31:
-
- {
- menu_end_entry();
- printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 32:
-
- {
- struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
- sym->flags |= SYMBOL_OPTIONAL;
- menu_add_entry(sym);
- printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
-}
- break;
-
- case 33:
-
- {
- if (current_entry->prompt)
- current_entry->prompt->type = P_MENU;
- else
- zconfprint("warning: menuconfig statement without prompt");
- menu_end_entry();
- printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 41:
-
- {
- menu_set_type((yyvsp[(1) - (3)].id)->stype);
- printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
- zconf_curname(), zconf_lineno(),
- (yyvsp[(1) - (3)].id)->stype);
-}
- break;
-
- case 42:
-
- {
- menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
- printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 43:
-
- {
- menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr));
- if ((yyvsp[(1) - (4)].id)->stype != S_UNKNOWN)
- menu_set_type((yyvsp[(1) - (4)].id)->stype);
- printd(DEBUG_PARSE, "%s:%d:default(%u)\n",
- zconf_curname(), zconf_lineno(),
- (yyvsp[(1) - (4)].id)->stype);
-}
- break;
-
- case 44:
-
- {
- menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
- printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 45:
-
- {
- menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr));
- printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 48:
-
- {
- const struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string)));
- if (id && id->flags & TF_OPTION)
- menu_add_option(id->token, (yyvsp[(3) - (3)].string));
- else
- zconfprint("warning: ignoring unknown option %s", (yyvsp[(2) - (3)].string));
- free((yyvsp[(2) - (3)].string));
-}
- break;
-
- case 49:
-
- { (yyval.string) = NULL; }
- break;
-
- case 50:
-
- { (yyval.string) = (yyvsp[(2) - (2)].string); }
- break;
-
- case 51:
-
- {
- struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE);
- sym->flags |= SYMBOL_AUTO;
- menu_add_entry(sym);
- menu_add_expr(P_CHOICE, NULL, NULL);
- printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 52:
-
- {
- (yyval.menu) = menu_add_menu();
-}
- break;
-
- case 53:
-
- {
- if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) {
- menu_end_menu();
- printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno());
- }
-}
- break;
-
- case 61:
-
- {
- menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
- printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 62:
-
- {
- if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) {
- menu_set_type((yyvsp[(1) - (3)].id)->stype);
- printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
- zconf_curname(), zconf_lineno(),
- (yyvsp[(1) - (3)].id)->stype);
- } else
- YYERROR;
-}
- break;
-
- case 63:
-
- {
- current_entry->sym->flags |= SYMBOL_OPTIONAL;
- printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 64:
-
- {
- if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) {
- menu_add_symbol(P_DEFAULT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
- printd(DEBUG_PARSE, "%s:%d:default\n",
- zconf_curname(), zconf_lineno());
- } else
- YYERROR;
-}
- break;
-
- case 67:
-
- {
- printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
- menu_add_entry(NULL);
- menu_add_dep((yyvsp[(2) - (3)].expr));
- (yyval.menu) = menu_add_menu();
-}
- break;
-
- case 68:
-
- {
- if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) {
- menu_end_menu();
- printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno());
- }
-}
- break;
-
- case 74:
-
- {
- menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL);
-}
- break;
-
- case 75:
-
- {
- menu_add_entry(NULL);
- menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL);
- printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 76:
-
- {
- (yyval.menu) = menu_add_menu();
-}
- break;
-
- case 77:
-
- {
- if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) {
- menu_end_menu();
- printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno());
- }
-}
- break;
-
- case 83:
-
- {
- printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
- zconf_nextfile((yyvsp[(2) - (3)].string));
-}
- break;
-
- case 84:
-
- {
- menu_add_entry(NULL);
- menu_add_prompt(P_COMMENT, (yyvsp[(2) - (3)].string), NULL);
- printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 85:
-
- {
- menu_end_entry();
-}
- break;
-
- case 86:
-
- {
- printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
- zconf_starthelp();
-}
- break;
-
- case 87:
-
- {
- current_entry->help = (yyvsp[(2) - (2)].string);
-}
- break;
-
- case 92:
-
- {
- menu_add_dep((yyvsp[(3) - (4)].expr));
- printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
-}
- break;
-
- case 96:
-
- {
- menu_add_visibility((yyvsp[(2) - (2)].expr));
-}
- break;
-
- case 98:
-
- {
- menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr));
-}
- break;
-
- case 101:
-
- { (yyval.id) = (yyvsp[(1) - (2)].id); }
- break;
-
- case 102:
-
- { (yyval.id) = (yyvsp[(1) - (2)].id); }
- break;
-
- case 103:
-
- { (yyval.id) = (yyvsp[(1) - (2)].id); }
- break;
-
- case 106:
-
- { (yyval.expr) = NULL; }
- break;
-
- case 107:
-
- { (yyval.expr) = (yyvsp[(2) - (2)].expr); }
- break;
-
- case 108:
-
- { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); }
- break;
-
- case 109:
-
- { (yyval.expr) = expr_alloc_comp(E_LTH, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); }
- break;
-
- case 110:
-
- { (yyval.expr) = expr_alloc_comp(E_LEQ, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); }
- break;
-
- case 111:
-
- { (yyval.expr) = expr_alloc_comp(E_GTH, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); }
- break;
-
- case 112:
-
- { (yyval.expr) = expr_alloc_comp(E_GEQ, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); }
- break;
-
- case 113:
-
- { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); }
- break;
-
- case 114:
-
- { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); }
- break;
-
- case 115:
-
- { (yyval.expr) = (yyvsp[(2) - (3)].expr); }
- break;
-
- case 116:
-
- { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); }
- break;
-
- case 117:
-
- { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); }
- break;
-
- case 118:
-
- { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); }
- break;
-
- case 119:
-
- { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); }
- break;
-
- case 120:
-
- { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); }
- break;
-
- case 121:
-
- { (yyval.string) = NULL; }
- break;
-
-
-
- default: break;
- }
- /* User semantic actions sometimes alter yychar, and that requires
- that yytoken be updated with the new translation. We take the
- approach of translating immediately before every use of yytoken.
- One alternative is translating here after every semantic action,
- but that translation would be missed if the semantic action invokes
- YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or
- if it invokes YYBACKUP. In the case of YYABORT or YYACCEPT, an
- incorrect destructor might then be invoked immediately. In the
- case of YYERROR or YYBACKUP, subsequent parser actions might lead
- to an incorrect destructor call or verbose syntax error message
- before the lookahead is translated. */
- YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
-
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
-
- /* Now `shift' the result of the reduction. Determine what state
- that goes to, based on the state we popped back to and the rule
- number reduced by. */
-
- yyn = yyr1[yyn];
-
- yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
- if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
- yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
-
-/*------------------------------------.
-| yyerrlab -- here on detecting error |
-`------------------------------------*/
-yyerrlab:
- /* Make sure we have latest lookahead translation. See comments at
- user semantic actions for why this is necessary. */
- yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar);
-
- /* If not already recovering from an error, report this error. */
- if (!yyerrstatus)
- {
- ++yynerrs;
-#if ! YYERROR_VERBOSE
- yyerror (YY_("syntax error"));
-#else
-# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \
- yyssp, yytoken)
- {
- char const *yymsgp = YY_("syntax error");
- int yysyntax_error_status;
- yysyntax_error_status = YYSYNTAX_ERROR;
- if (yysyntax_error_status == 0)
- yymsgp = yymsg;
- else if (yysyntax_error_status == 1)
- {
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
- yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc);
- if (!yymsg)
- {
- yymsg = yymsgbuf;
- yymsg_alloc = sizeof yymsgbuf;
- yysyntax_error_status = 2;
- }
- else
- {
- yysyntax_error_status = YYSYNTAX_ERROR;
- yymsgp = yymsg;
- }
- }
- yyerror (yymsgp);
- if (yysyntax_error_status == 2)
- goto yyexhaustedlab;
- }
-# undef YYSYNTAX_ERROR
-#endif
- }
-
-
-
- if (yyerrstatus == 3)
- {
- /* If just tried and failed to reuse lookahead token after an
- error, discard it. */
-
- if (yychar <= YYEOF)
- {
- /* Return failure if at end of input. */
- if (yychar == YYEOF)
- YYABORT;
- }
- else
- {
- yydestruct ("Error: discarding",
- yytoken, &yylval);
- yychar = YYEMPTY;
- }
- }
-
- /* Else will try to reuse lookahead token after shifting the error
- token. */
- goto yyerrlab1;
-
-
-/*---------------------------------------------------.
-| yyerrorlab -- error raised explicitly by YYERROR. |
-`---------------------------------------------------*/
-yyerrorlab:
-
- /* Pacify compilers like GCC when the user code never invokes
- YYERROR and the label yyerrorlab therefore never appears in user
- code. */
- if (/*CONSTCOND*/ 0)
- goto yyerrorlab;
-
- /* Do not reclaim the symbols of the rule which action triggered
- this YYERROR. */
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
- yystate = *yyssp;
- goto yyerrlab1;
-
-
-/*-------------------------------------------------------------.
-| yyerrlab1 -- common code for both syntax error and YYERROR. |
-`-------------------------------------------------------------*/
-yyerrlab1:
- yyerrstatus = 3; /* Each real token shifted decrements this. */
-
- for (;;)
- {
- yyn = yypact[yystate];
- if (!yypact_value_is_default (yyn))
- {
- yyn += YYTERROR;
- if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
- {
- yyn = yytable[yyn];
- if (0 < yyn)
- break;
- }
- }
-
- /* Pop the current state because it cannot handle the error token. */
- if (yyssp == yyss)
- YYABORT;
-
-
- yydestruct ("Error: popping",
- yystos[yystate], yyvsp);
- YYPOPSTACK (1);
- yystate = *yyssp;
- YY_STACK_PRINT (yyss, yyssp);
- }
-
- *++yyvsp = yylval;
-
-
- /* Shift the error token. */
- YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
-
- yystate = yyn;
- goto yynewstate;
-
-
-/*-------------------------------------.
-| yyacceptlab -- YYACCEPT comes here. |
-`-------------------------------------*/
-yyacceptlab:
- yyresult = 0;
- goto yyreturn;
-
-/*-----------------------------------.
-| yyabortlab -- YYABORT comes here. |
-`-----------------------------------*/
-yyabortlab:
- yyresult = 1;
- goto yyreturn;
-
-#if !defined yyoverflow || YYERROR_VERBOSE
-/*-------------------------------------------------.
-| yyexhaustedlab -- memory exhaustion comes here. |
-`-------------------------------------------------*/
-yyexhaustedlab:
- yyerror (YY_("memory exhausted"));
- yyresult = 2;
- /* Fall through. */
-#endif
-
-yyreturn:
- if (yychar != YYEMPTY)
- {
- /* Make sure we have latest lookahead translation. See comments at
- user semantic actions for why this is necessary. */
- yytoken = YYTRANSLATE (yychar);
- yydestruct ("Cleanup: discarding lookahead",
- yytoken, &yylval);
- }
- /* Do not reclaim the symbols of the rule which action triggered
- this YYABORT or YYACCEPT. */
- YYPOPSTACK (yylen);
- YY_STACK_PRINT (yyss, yyssp);
- while (yyssp != yyss)
- {
- yydestruct ("Cleanup: popping",
- yystos[*yyssp], yyvsp);
- YYPOPSTACK (1);
- }
-#ifndef yyoverflow
- if (yyss != yyssa)
- YYSTACK_FREE (yyss);
-#endif
-#if YYERROR_VERBOSE
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
-#endif
- /* Make sure YYID is used. */
- return YYID (yyresult);
-}
-
-
-
-
-
-void conf_parse(const char *name)
-{
- struct symbol *sym;
- int i;
-
- zconf_initscan(name);
-
- sym_init();
- _menu_init();
- rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
-
- if (getenv("ZCONF_DEBUG"))
- zconfdebug = 1;
- zconfparse();
- if (zconfnerrs)
- exit(1);
- if (!modules_sym)
- modules_sym = sym_find( "n" );
-
- rootmenu.prompt->text = rootmenu.prompt->text;
- rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text);
-
- menu_finalize(&rootmenu);
- for_all_symbols(i, sym) {
- if (sym_check_deps(sym))
- zconfnerrs++;
- }
- if (zconfnerrs)
- exit(1);
- sym_set_change_count(1);
-}
-
-static const char *zconf_tokenname(int token)
-{
- switch (token) {
- case T_MENU: return "menu";
- case T_ENDMENU: return "endmenu";
- case T_CHOICE: return "choice";
- case T_ENDCHOICE: return "endchoice";
- case T_IF: return "if";
- case T_ENDIF: return "endif";
- case T_DEPENDS: return "depends";
- case T_VISIBLE: return "visible";
- }
- return "<token>";
-}
-
-static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken)
-{
- if (id->token != endtoken) {
- zconf_error("unexpected '%s' within %s block",
- kconf_id_strings + id->name, zconf_tokenname(starttoken));
- zconfnerrs++;
- return false;
- }
- if (current_menu->file != current_file) {
- zconf_error("'%s' in different file than '%s'",
- kconf_id_strings + id->name, zconf_tokenname(starttoken));
- fprintf(stderr, "%s:%d: location of the '%s'\n",
- current_menu->file->name, current_menu->lineno,
- zconf_tokenname(starttoken));
- zconfnerrs++;
- return false;
- }
- return true;
-}
-
-static void zconfprint(const char *err, ...)
-{
- va_list ap;
-
- fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
- va_start(ap, err);
- vfprintf(stderr, err, ap);
- va_end(ap);
- fprintf(stderr, "\n");
-}
-
-static void zconf_error(const char *err, ...)
-{
- va_list ap;
-
- zconfnerrs++;
- fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
- va_start(ap, err);
- vfprintf(stderr, err, ap);
- va_end(ap);
- fprintf(stderr, "\n");
-}
-
-static void zconferror(const char *err)
-{
- fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err);
-}
-
-static void print_quoted_string(FILE *out, const char *str)
-{
- const char *p;
- int len;
-
- putc('"', out);
- while ((p = strchr(str, '"'))) {
- len = p - str;
- if (len)
- fprintf(out, "%.*s", len, str);
- fputs("\\\"", out);
- str = p + 1;
- }
- fputs(str, out);
- putc('"', out);
-}
-
-static void print_symbol(FILE *out, struct menu *menu)
-{
- struct symbol *sym = menu->sym;
- struct property *prop;
-
- if (sym_is_choice(sym))
- fprintf(out, "\nchoice\n");
- else
- fprintf(out, "\nconfig %s\n", sym->name);
- switch (sym->type) {
- case S_BOOLEAN:
- fputs(" boolean\n", out);
- break;
- case S_TRISTATE:
- fputs(" tristate\n", out);
- break;
- case S_STRING:
- fputs(" string\n", out);
- break;
- case S_INT:
- fputs(" integer\n", out);
- break;
- case S_HEX:
- fputs(" hex\n", out);
- break;
- default:
- fputs(" ???\n", out);
- break;
- }
- for (prop = sym->prop; prop; prop = prop->next) {
- if (prop->menu != menu)
- continue;
- switch (prop->type) {
- case P_PROMPT:
- fputs(" prompt ", out);
- print_quoted_string(out, prop->text);
- if (!expr_is_yes(prop->visible.expr)) {
- fputs(" if ", out);
- expr_fprint(prop->visible.expr, out);
- }
- fputc('\n', out);
- break;
- case P_DEFAULT:
- fputs( " default ", out);
- expr_fprint(prop->expr, out);
- if (!expr_is_yes(prop->visible.expr)) {
- fputs(" if ", out);
- expr_fprint(prop->visible.expr, out);
- }
- fputc('\n', out);
- break;
- case P_CHOICE:
- fputs(" #choice value\n", out);
- break;
- case P_SELECT:
- fputs( " select ", out);
- expr_fprint(prop->expr, out);
- fputc('\n', out);
- break;
- case P_RANGE:
- fputs( " range ", out);
- expr_fprint(prop->expr, out);
- fputc('\n', out);
- break;
- case P_MENU:
- fputs( " menu ", out);
- print_quoted_string(out, prop->text);
- fputc('\n', out);
- break;
- default:
- fprintf(out, " unknown prop %d!\n", prop->type);
- break;
- }
- }
- if (menu->help) {
- int len = strlen(menu->help);
- while (menu->help[--len] == '\n')
- menu->help[len] = 0;
- fprintf(out, " help\n%s\n", menu->help);
- }
-}
-
-void zconfdump(FILE *out)
-{
- struct property *prop;
- struct symbol *sym;
- struct menu *menu;
-
- menu = rootmenu.list;
- while (menu) {
- if ((sym = menu->sym))
- print_symbol(out, menu);
- else if ((prop = menu->prompt)) {
- switch (prop->type) {
- case P_COMMENT:
- fputs("\ncomment ", out);
- print_quoted_string(out, prop->text);
- fputs("\n", out);
- break;
- case P_MENU:
- fputs("\nmenu ", out);
- print_quoted_string(out, prop->text);
- fputs("\n", out);
- break;
- default:
- ;
- }
- if (!expr_is_yes(prop->visible.expr)) {
- fputs(" depends ", out);
- expr_fprint(prop->visible.expr, out);
- fputc('\n', out);
- }
- }
-
- if (menu->list)
- menu = menu->list;
- else if (menu->next)
- menu = menu->next;
- else while ((menu = menu->parent)) {
- if (menu->prompt && menu->prompt->type == P_MENU)
- fputs("\nendmenu\n", out);
- if (menu->next) {
- menu = menu->next;
- break;
- }
- }
- }
-}
-
-#include "zconf.lex.c"
-#include "util.c"
-#include "confdata.c"
-#include "expr.c"
-#include "symbol.c"
-#include "menu.c"
-
This patch updates Kconfig to a more recent version of Kconfig, found in Linux v5.4.0, 219d54332a09 ("Linux 5.4"). With the updated version of Kconfig, other changes are necessary to avoid breaking the build. Kconfig files: - fix Kconfig files that where using option env=*: Since Linux commit 104daea149c4 ("kconfig: reference environment variables directly and remove 'option env='"), we can access the environment directly via $() and "option env=" as been removed. - CONFIG_EXPERT='y' will now appear in .config file if XEN_CONFIG_EXPERT=y in the environment. The alternative is to change "EXPERT" to "$(XEN_CONFIG_EXPERT)" in all Kconfig files. Makefile: - silentoldconfig target as been removed from Kconfig. To update include/generated/autoconf.h, we need to use syncconfig target instead. Makefile.kconfig: - Import newer needed code from Linux's Makefile.lib and Kbuild.include and Makefile.build. - Set Q to empty, Xen build system doesn't silence commands. Having Q empty mean we can import stuff from Linux without having to remove the leading $(Q) from build commands. And quiet='' means commands will be echoed. - Add $(PHONY) to .PHONY. Like it is intended by Kbuild. Makefile.host is also updated and copied from Linux. Dependency change: - Now depends on flex/bison, maybe we could _shipped those files like before. Linux doesn't do that anymore. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> --- docs/misc/kconfig-language.rst | 701 +++++ docs/misc/kconfig-language.txt | 395 --- docs/misc/kconfig-macro-language.rst | 247 ++ docs/misc/{kconfig.txt => kconfig.rst} | 185 +- xen/.gitignore | 2 + xen/Kconfig | 18 +- xen/Makefile | 4 +- xen/arch/arm/Kconfig | 2 +- xen/common/Kconfig | 12 +- xen/tools/kconfig/.gitignore | 6 +- xen/tools/kconfig/Makefile | 268 +- xen/tools/kconfig/Makefile.host | 121 +- xen/tools/kconfig/Makefile.kconfig | 52 +- xen/tools/kconfig/conf.c | 191 +- xen/tools/kconfig/confdata.c | 491 ++-- xen/tools/kconfig/expr.c | 213 +- xen/tools/kconfig/expr.h | 108 +- xen/tools/kconfig/gconf-cfg.sh | 30 + xen/tools/kconfig/gconf.c | 39 +- xen/tools/kconfig/images.c | 34 +- xen/tools/kconfig/images.h | 33 + xen/tools/kconfig/lexer.l | 471 +++ xen/tools/kconfig/list.h | 1 + xen/tools/kconfig/lkc.h | 38 +- xen/tools/kconfig/lkc_proto.h | 21 +- xen/tools/kconfig/lxdialog/.gitignore | 4 - xen/tools/kconfig/lxdialog/BIG.FAT.WARNING | 2 +- xen/tools/kconfig/lxdialog/check-lxdialog.sh | 91 - xen/tools/kconfig/lxdialog/checklist.c | 15 +- xen/tools/kconfig/lxdialog/dialog.h | 17 +- xen/tools/kconfig/lxdialog/inputbox.c | 18 +- xen/tools/kconfig/lxdialog/menubox.c | 15 +- xen/tools/kconfig/lxdialog/textbox.c | 15 +- xen/tools/kconfig/lxdialog/util.c | 15 +- xen/tools/kconfig/lxdialog/yesno.c | 15 +- xen/tools/kconfig/mconf-cfg.sh | 47 + xen/tools/kconfig/mconf.c | 27 +- xen/tools/kconfig/menu.c | 288 +- xen/tools/kconfig/merge_config.sh | 87 +- xen/tools/kconfig/nconf-cfg.sh | 47 + xen/tools/kconfig/nconf.c | 42 +- xen/tools/kconfig/nconf.gui.c | 30 +- xen/tools/kconfig/nconf.h | 9 +- xen/tools/kconfig/{zconf.y => parser.y} | 409 ++- xen/tools/kconfig/preprocess.c | 574 ++++ xen/tools/kconfig/qconf-cfg.sh | 32 + xen/tools/kconfig/qconf.cc | 750 +++-- xen/tools/kconfig/qconf.h | 153 +- xen/tools/kconfig/streamline_config.pl | 53 +- xen/tools/kconfig/symbol.c | 295 +- xen/tools/kconfig/tests/auto_submenu/Kconfig | 52 + .../kconfig/tests/auto_submenu/__init__.py | 13 + .../tests/auto_submenu/expected_stdout | 10 + xen/tools/kconfig/tests/choice/Kconfig | 56 + xen/tools/kconfig/tests/choice/__init__.py | 41 + .../tests/choice/alldef_expected_config | 5 + .../tests/choice/allmod_expected_config | 9 + .../tests/choice/allno_expected_config | 5 + .../tests/choice/allyes_expected_config | 9 + .../tests/choice/oldask0_expected_stdout | 10 + xen/tools/kconfig/tests/choice/oldask1_config | 2 + .../tests/choice/oldask1_expected_stdout | 15 + .../tests/choice_value_with_m_dep/Kconfig | 21 + .../tests/choice_value_with_m_dep/__init__.py | 16 + .../tests/choice_value_with_m_dep/config | 2 + .../choice_value_with_m_dep/expected_config | 3 + .../choice_value_with_m_dep/expected_stdout | 4 + xen/tools/kconfig/tests/conftest.py | 291 ++ .../kconfig/tests/err_recursive_dep/Kconfig | 63 + .../tests/err_recursive_dep/__init__.py | 10 + .../tests/err_recursive_dep/expected_stderr | 38 + .../kconfig/tests/err_recursive_inc/Kconfig | 2 + .../tests/err_recursive_inc/Kconfig.inc1 | 5 + .../tests/err_recursive_inc/Kconfig.inc2 | 4 + .../tests/err_recursive_inc/Kconfig.inc3 | 2 + .../tests/err_recursive_inc/__init__.py | 11 + .../tests/err_recursive_inc/expected_stderr | 6 + xen/tools/kconfig/tests/inter_choice/Kconfig | 25 + .../kconfig/tests/inter_choice/__init__.py | 15 + .../kconfig/tests/inter_choice/defconfig | 1 + .../tests/inter_choice/expected_config | 4 + .../kconfig/tests/new_choice_with_dep/Kconfig | 39 + .../tests/new_choice_with_dep/__init__.py | 15 + .../kconfig/tests/new_choice_with_dep/config | 3 + .../tests/new_choice_with_dep/expected_stdout | 10 + .../tests/no_write_if_dep_unmet/Kconfig | 16 + .../tests/no_write_if_dep_unmet/__init__.py | 20 + .../tests/no_write_if_dep_unmet/config | 1 + .../no_write_if_dep_unmet/expected_config | 5 + .../tests/preprocess/builtin_func/Kconfig | 27 + .../tests/preprocess/builtin_func/__init__.py | 9 + .../preprocess/builtin_func/expected_stderr | 5 + .../preprocess/builtin_func/expected_stdout | 1 + .../preprocess/circular_expansion/Kconfig | 5 + .../preprocess/circular_expansion/__init__.py | 11 + .../circular_expansion/expected_stderr | 1 + .../kconfig/tests/preprocess/escape/Kconfig | 44 + .../tests/preprocess/escape/__init__.py | 8 + .../tests/preprocess/escape/expected_stderr | 10 + .../kconfig/tests/preprocess/variable/Kconfig | 53 + .../tests/preprocess/variable/__init__.py | 8 + .../tests/preprocess/variable/expected_stderr | 9 + xen/tools/kconfig/tests/pytest.ini | 7 + .../kconfig/tests/rand_nested_choice/Kconfig | 35 + .../tests/rand_nested_choice/__init__.py | 17 + .../tests/rand_nested_choice/expected_stdout0 | 2 + .../tests/rand_nested_choice/expected_stdout1 | 4 + .../tests/rand_nested_choice/expected_stdout2 | 5 + xen/tools/kconfig/util.c | 86 +- xen/tools/kconfig/zconf.gperf | 49 - xen/tools/kconfig/zconf.hash.c_shipped | 293 -- xen/tools/kconfig/zconf.l | 374 --- xen/tools/kconfig/zconf.lex.c_shipped | 2473 ---------------- xen/tools/kconfig/zconf.tab.c_shipped | 2580 ----------------- 114 files changed, 5639 insertions(+), 8069 deletions(-) create mode 100644 docs/misc/kconfig-language.rst delete mode 100644 docs/misc/kconfig-language.txt create mode 100644 docs/misc/kconfig-macro-language.rst rename docs/misc/{kconfig.txt => kconfig.rst} (70%) create mode 100644 xen/.gitignore create mode 100755 xen/tools/kconfig/gconf-cfg.sh create mode 100644 xen/tools/kconfig/images.h create mode 100644 xen/tools/kconfig/lexer.l delete mode 100644 xen/tools/kconfig/lxdialog/.gitignore delete mode 100755 xen/tools/kconfig/lxdialog/check-lxdialog.sh create mode 100755 xen/tools/kconfig/mconf-cfg.sh create mode 100755 xen/tools/kconfig/nconf-cfg.sh rename xen/tools/kconfig/{zconf.y => parser.y} (66%) create mode 100644 xen/tools/kconfig/preprocess.c create mode 100755 xen/tools/kconfig/qconf-cfg.sh create mode 100644 xen/tools/kconfig/tests/auto_submenu/Kconfig create mode 100644 xen/tools/kconfig/tests/auto_submenu/__init__.py create mode 100644 xen/tools/kconfig/tests/auto_submenu/expected_stdout create mode 100644 xen/tools/kconfig/tests/choice/Kconfig create mode 100644 xen/tools/kconfig/tests/choice/__init__.py create mode 100644 xen/tools/kconfig/tests/choice/alldef_expected_config create mode 100644 xen/tools/kconfig/tests/choice/allmod_expected_config create mode 100644 xen/tools/kconfig/tests/choice/allno_expected_config create mode 100644 xen/tools/kconfig/tests/choice/allyes_expected_config create mode 100644 xen/tools/kconfig/tests/choice/oldask0_expected_stdout create mode 100644 xen/tools/kconfig/tests/choice/oldask1_config create mode 100644 xen/tools/kconfig/tests/choice/oldask1_expected_stdout create mode 100644 xen/tools/kconfig/tests/choice_value_with_m_dep/Kconfig create mode 100644 xen/tools/kconfig/tests/choice_value_with_m_dep/__init__.py create mode 100644 xen/tools/kconfig/tests/choice_value_with_m_dep/config create mode 100644 xen/tools/kconfig/tests/choice_value_with_m_dep/expected_config create mode 100644 xen/tools/kconfig/tests/choice_value_with_m_dep/expected_stdout create mode 100644 xen/tools/kconfig/tests/conftest.py create mode 100644 xen/tools/kconfig/tests/err_recursive_dep/Kconfig create mode 100644 xen/tools/kconfig/tests/err_recursive_dep/__init__.py create mode 100644 xen/tools/kconfig/tests/err_recursive_dep/expected_stderr create mode 100644 xen/tools/kconfig/tests/err_recursive_inc/Kconfig create mode 100644 xen/tools/kconfig/tests/err_recursive_inc/Kconfig.inc1 create mode 100644 xen/tools/kconfig/tests/err_recursive_inc/Kconfig.inc2 create mode 100644 xen/tools/kconfig/tests/err_recursive_inc/Kconfig.inc3 create mode 100644 xen/tools/kconfig/tests/err_recursive_inc/__init__.py create mode 100644 xen/tools/kconfig/tests/err_recursive_inc/expected_stderr create mode 100644 xen/tools/kconfig/tests/inter_choice/Kconfig create mode 100644 xen/tools/kconfig/tests/inter_choice/__init__.py create mode 100644 xen/tools/kconfig/tests/inter_choice/defconfig create mode 100644 xen/tools/kconfig/tests/inter_choice/expected_config create mode 100644 xen/tools/kconfig/tests/new_choice_with_dep/Kconfig create mode 100644 xen/tools/kconfig/tests/new_choice_with_dep/__init__.py create mode 100644 xen/tools/kconfig/tests/new_choice_with_dep/config create mode 100644 xen/tools/kconfig/tests/new_choice_with_dep/expected_stdout create mode 100644 xen/tools/kconfig/tests/no_write_if_dep_unmet/Kconfig create mode 100644 xen/tools/kconfig/tests/no_write_if_dep_unmet/__init__.py create mode 100644 xen/tools/kconfig/tests/no_write_if_dep_unmet/config create mode 100644 xen/tools/kconfig/tests/no_write_if_dep_unmet/expected_config create mode 100644 xen/tools/kconfig/tests/preprocess/builtin_func/Kconfig create mode 100644 xen/tools/kconfig/tests/preprocess/builtin_func/__init__.py create mode 100644 xen/tools/kconfig/tests/preprocess/builtin_func/expected_stderr create mode 100644 xen/tools/kconfig/tests/preprocess/builtin_func/expected_stdout create mode 100644 xen/tools/kconfig/tests/preprocess/circular_expansion/Kconfig create mode 100644 xen/tools/kconfig/tests/preprocess/circular_expansion/__init__.py create mode 100644 xen/tools/kconfig/tests/preprocess/circular_expansion/expected_stderr create mode 100644 xen/tools/kconfig/tests/preprocess/escape/Kconfig create mode 100644 xen/tools/kconfig/tests/preprocess/escape/__init__.py create mode 100644 xen/tools/kconfig/tests/preprocess/escape/expected_stderr create mode 100644 xen/tools/kconfig/tests/preprocess/variable/Kconfig create mode 100644 xen/tools/kconfig/tests/preprocess/variable/__init__.py create mode 100644 xen/tools/kconfig/tests/preprocess/variable/expected_stderr create mode 100644 xen/tools/kconfig/tests/pytest.ini create mode 100644 xen/tools/kconfig/tests/rand_nested_choice/Kconfig create mode 100644 xen/tools/kconfig/tests/rand_nested_choice/__init__.py create mode 100644 xen/tools/kconfig/tests/rand_nested_choice/expected_stdout0 create mode 100644 xen/tools/kconfig/tests/rand_nested_choice/expected_stdout1 create mode 100644 xen/tools/kconfig/tests/rand_nested_choice/expected_stdout2 delete mode 100644 xen/tools/kconfig/zconf.gperf delete mode 100644 xen/tools/kconfig/zconf.hash.c_shipped delete mode 100644 xen/tools/kconfig/zconf.l delete mode 100644 xen/tools/kconfig/zconf.lex.c_shipped delete mode 100644 xen/tools/kconfig/zconf.tab.c_shipped