| Message ID | 20191209180514.272727-8-jean-philippe@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iommu: Add PASID support to Arm SMMUv3 | expand |
Hi Jean, On 12/9/19 7:05 PM, Jean-Philippe Brucker wrote: > At the moment, the SMMUv3 driver implements only one stage-1 or stage-2 > page directory per device. However SMMUv3 allows more than one address > space for some devices, by providing multiple stage-1 page directories. In > addition to the Stream ID (SID), that identifies a device, we can now have > Substream IDs (SSID) identifying an address space. In PCIe, SID is called > Requester ID (RID) and SSID is called Process Address-Space ID (PASID). > A complete stage-1 walk goes through the context descriptor table: > > Stream tables Ctx. Desc. tables Page tables > +--------+ ,------->+-------+ ,------->+-------+ > : : | : : | : : > +--------+ | +-------+ | +-------+ > SID->| STE |---' SSID->| CD |---' IOVA->| PTE |--> IPA > +--------+ +-------+ +-------+ > : : : : : : > +--------+ +-------+ +-------+ > > Rewrite arm_smmu_write_ctx_desc() to modify context descriptor table > entries. To keep things simple we only implement one level of context > descriptor tables here, but as with stream and page tables, an SSID can > be split to index multiple levels of tables. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> > --- > drivers/iommu/arm-smmu-v3.c | 125 +++++++++++++++++++++++++++++------- > 1 file changed, 102 insertions(+), 23 deletions(-) > > diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c > index 43d6a7ded6e4..a01071123c34 100644 > --- a/drivers/iommu/arm-smmu-v3.c > +++ b/drivers/iommu/arm-smmu-v3.c > @@ -227,6 +227,11 @@ > #define STRTAB_STE_0_S1CTXPTR_MASK GENMASK_ULL(51, 6) > #define STRTAB_STE_0_S1CDMAX GENMASK_ULL(63, 59) > > +#define STRTAB_STE_1_S1DSS GENMASK_ULL(1, 0) > +#define STRTAB_STE_1_S1DSS_TERMINATE 0x0 > +#define STRTAB_STE_1_S1DSS_BYPASS 0x1 > +#define STRTAB_STE_1_S1DSS_SSID0 0x2 > + > #define STRTAB_STE_1_S1C_CACHE_NC 0UL > #define STRTAB_STE_1_S1C_CACHE_WBRA 1UL > #define STRTAB_STE_1_S1C_CACHE_WT 2UL > @@ -329,6 +334,7 @@ > #define CMDQ_PREFETCH_1_SIZE GENMASK_ULL(4, 0) > #define CMDQ_PREFETCH_1_ADDR_MASK GENMASK_ULL(63, 12) > > +#define CMDQ_CFGI_0_SSID GENMASK_ULL(31, 12) > #define CMDQ_CFGI_0_SID GENMASK_ULL(63, 32) > #define CMDQ_CFGI_1_LEAF (1UL << 0) > #define CMDQ_CFGI_1_RANGE GENMASK_ULL(4, 0) > @@ -446,8 +452,11 @@ struct arm_smmu_cmdq_ent { > > #define CMDQ_OP_CFGI_STE 0x3 > #define CMDQ_OP_CFGI_ALL 0x4 > + #define CMDQ_OP_CFGI_CD 0x5 > + #define CMDQ_OP_CFGI_CD_ALL 0x6 > struct { > u32 sid; > + u32 ssid; > union { > bool leaf; > u8 span; > @@ -568,6 +577,7 @@ struct arm_smmu_cd_table { > struct arm_smmu_s1_cfg { > struct arm_smmu_cd_table table; > struct arm_smmu_ctx_desc cd; > + u8 s1fmt; > u8 s1cdmax; > }; > > @@ -860,10 +870,16 @@ static int arm_smmu_cmdq_build_cmd(u64 *cmd, struct arm_smmu_cmdq_ent *ent) > cmd[1] |= FIELD_PREP(CMDQ_PREFETCH_1_SIZE, ent->prefetch.size); > cmd[1] |= ent->prefetch.addr & CMDQ_PREFETCH_1_ADDR_MASK; > break; > + case CMDQ_OP_CFGI_CD: > + cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SSID, ent->cfgi.ssid); > + /* Fallthrough */ > case CMDQ_OP_CFGI_STE: > cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SID, ent->cfgi.sid); > cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_LEAF, ent->cfgi.leaf); > break; > + case CMDQ_OP_CFGI_CD_ALL: > + cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SID, ent->cfgi.sid); > + break; > case CMDQ_OP_CFGI_ALL: > /* Cover the entire SID range */ > cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_RANGE, 31); > @@ -1456,6 +1472,33 @@ static int arm_smmu_cmdq_issue_sync(struct arm_smmu_device *smmu) > } > > /* Context descriptor manipulation functions */ > +static void arm_smmu_sync_cd(struct arm_smmu_domain *smmu_domain, > + int ssid, bool leaf) > +{ > + size_t i; > + unsigned long flags; > + struct arm_smmu_master *master; > + struct arm_smmu_device *smmu = smmu_domain->smmu; > + struct arm_smmu_cmdq_ent cmd = { > + .opcode = CMDQ_OP_CFGI_CD, > + .cfgi = { > + .ssid = ssid, > + .leaf = leaf, > + }, > + }; > + > + spin_lock_irqsave(&smmu_domain->devices_lock, flags); > + list_for_each_entry(master, &smmu_domain->devices, domain_head) { > + for (i = 0; i < master->num_sids; i++) { > + cmd.cfgi.sid = master->sids[i]; > + arm_smmu_cmdq_issue_cmd(smmu, &cmd); > + } > + } > + spin_unlock_irqrestore(&smmu_domain->devices_lock, flags); > + > + arm_smmu_cmdq_issue_sync(smmu); > +} > + > static int arm_smmu_alloc_cd_leaf_table(struct arm_smmu_device *smmu, > struct arm_smmu_cd_table *table, > size_t num_entries) > @@ -1498,34 +1541,65 @@ static u64 arm_smmu_cpu_tcr_to_cd(u64 tcr) > return val; > } > > -static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu, > - struct arm_smmu_s1_cfg *cfg) > +static int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, > + int ssid, struct arm_smmu_ctx_desc *cd) > { > - u64 val; > - __le64 *cdptr = cfg->table.ptr; > - > /* > - * We don't need to issue any invalidation here, as we'll invalidate > - * the STE when installing the new entry anyway. > + * This function handles the following cases: > + * > + * (1) Install primary CD, for normal DMA traffic (SSID = 0). > + * (2) Install a secondary CD, for SID+SSID traffic. > + * (3) Update ASID of a CD. Atomically write the first 64 bits of the > + * CD, then invalidate the old entry and mappings. > + * (4) Remove a secondary CD. I see arm_smmu_write_ctx_desc getting called with non null cd in arm_smmu_attach_dev but I do not see it removed in the detach path? > */ > - val = arm_smmu_cpu_tcr_to_cd(cfg->cd.tcr) | > -#ifdef __BIG_ENDIAN > - CTXDESC_CD_0_ENDI | > -#endif > - CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | > - CTXDESC_CD_0_AA64 | FIELD_PREP(CTXDESC_CD_0_ASID, cfg->cd.asid) | > - CTXDESC_CD_0_V; > + u64 val; > + bool cd_live; > + struct arm_smmu_device *smmu = smmu_domain->smmu; > + __le64 *cdptr = smmu_domain->s1_cfg.table.ptr + ssid * > + CTXDESC_CD_DWORDS;> > - /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ > - if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) > - val |= CTXDESC_CD_0_S; > + val = le64_to_cpu(cdptr[0]); > + cd_live = !!(val & CTXDESC_CD_0_V); > > - cdptr[0] = cpu_to_le64(val); > + if (!cd) { /* (4) */ > + val = 0; > + } else if (cd_live) { /* (3) */ > + val &= ~CTXDESC_CD_0_ASID; > + val |= FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid); > + /* > + * Until CD+TLB invalidation, both ASIDs may be used for tagging > + * this substream's traffic > + */ > + } else { /* (1) and (2) */ > + cdptr[1] = cpu_to_le64(cd->ttbr & CTXDESC_CD_1_TTB0_MASK); > + cdptr[2] = 0; > + cdptr[3] = cpu_to_le64(cd->mair); > + > + /* > + * STE is live, and the SMMU might fetch this CD at any > + * time. Ensure that it observes the rest of the CD before we > + * enable it. Mostly, on't you want the invalid state to be seen? > + */ > + arm_smmu_sync_cd(smmu_domain, ssid, true); > > - val = cfg->cd.ttbr & CTXDESC_CD_1_TTB0_MASK; > - cdptr[1] = cpu_to_le64(val); > + val = arm_smmu_cpu_tcr_to_cd(cd->tcr) | > +#ifdef __BIG_ENDIAN > + CTXDESC_CD_0_ENDI | > +#endif > + CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | > + CTXDESC_CD_0_AA64 | > + FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid) | > + CTXDESC_CD_0_V; > > - cdptr[3] = cpu_to_le64(cfg->cd.mair); > + /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ > + if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) > + val |= CTXDESC_CD_0_S; > + } > + > + WRITE_ONCE(cdptr[0], cpu_to_le64(val)); > + arm_smmu_sync_cd(smmu_domain, ssid, true); > + return 0; > } > > static int arm_smmu_alloc_cd_tables(struct arm_smmu_domain *smmu_domain) > @@ -1533,6 +1607,7 @@ static int arm_smmu_alloc_cd_tables(struct arm_smmu_domain *smmu_domain) > struct arm_smmu_device *smmu = smmu_domain->smmu; > struct arm_smmu_s1_cfg *cfg = &smmu_domain->s1_cfg; > > + cfg->s1fmt = STRTAB_STE_0_S1FMT_LINEAR; > return arm_smmu_alloc_cd_leaf_table(smmu, &cfg->table, > 1 << cfg->s1cdmax); > } > @@ -1664,6 +1739,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, > if (s1_cfg) { > BUG_ON(ste_live); > dst[1] = cpu_to_le64( > + FIELD_PREP(STRTAB_STE_1_S1DSS, STRTAB_STE_1_S1DSS_SSID0) | > FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) | > FIELD_PREP(STRTAB_STE_1_S1COR, STRTAB_STE_1_S1C_CACHE_WBRA) | > FIELD_PREP(STRTAB_STE_1_S1CSH, ARM_SMMU_SH_ISH) | > @@ -1674,7 +1750,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, > dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD); > > val |= (s1_cfg->table.ptr_dma & STRTAB_STE_0_S1CTXPTR_MASK) | > - FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS); > + FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS) | > + FIELD_PREP(STRTAB_STE_0_S1CDMAX, s1_cfg->s1cdmax) | > + FIELD_PREP(STRTAB_STE_0_S1FMT, s1_cfg->s1fmt); Do I understand correctly that each time we update the CD, we also update the STE. This is not wrong but theoretically this is not needed, right? This also explains why you do not need the CMD_PREFETCH_CONFIG with ssid because you invalidate the config per sid? > } > > if (s2_cfg) { > @@ -2479,7 +2557,8 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) > master->ats_enabled = arm_smmu_ats_supported(master); > > if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) > - arm_smmu_write_ctx_desc(smmu, &smmu_domain->s1_cfg); > + arm_smmu_write_ctx_desc(smmu_domain, 0, > + &smmu_domain->s1_cfg.cd); > > arm_smmu_install_ste_for_dev(master); > > Thanks Eric
On Tue, Dec 17, 2019 at 05:43:59PM +0100, Auger Eric wrote: > > -static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu, > > - struct arm_smmu_s1_cfg *cfg) > > +static int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, > > + int ssid, struct arm_smmu_ctx_desc *cd) > > { > > - u64 val; > > - __le64 *cdptr = cfg->table.ptr; > > - > > /* > > - * We don't need to issue any invalidation here, as we'll invalidate > > - * the STE when installing the new entry anyway. > > + * This function handles the following cases: > > + * > > + * (1) Install primary CD, for normal DMA traffic (SSID = 0). > > + * (2) Install a secondary CD, for SID+SSID traffic. > > + * (3) Update ASID of a CD. Atomically write the first 64 bits of the > > + * CD, then invalidate the old entry and mappings. > > + * (4) Remove a secondary CD. > I see arm_smmu_write_ctx_desc getting called with non null cd in > arm_smmu_attach_dev but I do not see it removed in the detach path? No we don't have to remove the primary CD, since detach clears the STE and frees the CD tables. > > */ > > - val = arm_smmu_cpu_tcr_to_cd(cfg->cd.tcr) | > > -#ifdef __BIG_ENDIAN > > - CTXDESC_CD_0_ENDI | > > -#endif > > - CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | > > - CTXDESC_CD_0_AA64 | FIELD_PREP(CTXDESC_CD_0_ASID, cfg->cd.asid) | > > - CTXDESC_CD_0_V; > > + u64 val; > > + bool cd_live; > > + struct arm_smmu_device *smmu = smmu_domain->smmu; > > + __le64 *cdptr = smmu_domain->s1_cfg.table.ptr + ssid * > > + CTXDESC_CD_DWORDS;> > > - /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ > > - if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) > > - val |= CTXDESC_CD_0_S; > > + val = le64_to_cpu(cdptr[0]); > > + cd_live = !!(val & CTXDESC_CD_0_V); > > > > - cdptr[0] = cpu_to_le64(val); > > + if (!cd) { /* (4) */ > > + val = 0; > > + } else if (cd_live) { /* (3) */ > > + val &= ~CTXDESC_CD_0_ASID; > > + val |= FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid); > > + /* > > + * Until CD+TLB invalidation, both ASIDs may be used for tagging > > + * this substream's traffic > > + */ > > + } else { /* (1) and (2) */ > > + cdptr[1] = cpu_to_le64(cd->ttbr & CTXDESC_CD_1_TTB0_MASK); > > + cdptr[2] = 0; > > + cdptr[3] = cpu_to_le64(cd->mair); > > + > > + /* > > + * STE is live, and the SMMU might fetch this CD at any > > + * time. Ensure that it observes the rest of the CD before we > > + * enable it. > Mostly, on't you want the invalid state to be seen? Sorry I didn't get your question. Without the sync, the SMMU could read an invalid address in CD[1], read V=1 in CD[0] and proceed with dereferencing the bogus pointer before seeing our update to CD[1]. To prevent this we follow the update procedure described in IHI0070Ca 3.21.3.1 (Configuration structure update procedure): Because the SMMU can read any reachable structure at any time, and is not required to read the double-words of the structure in order, Arm recommends that the following procedure is used to initialize structures: 1. Structure starts invalid, having V == 0. 2. Fill in all fields, leaving V == 0, then perform a DSB operation to ensure written data is observable from the SMMU. 3. Issue a CMD_CFGI_<STRUCT>, as appropriate. 4. Issue a CMD_SYNC, and wait for completion. 5. Set V to 1, then perform a DSB operation to ensure write is observable by the SMMU. 6. Issue CMD_CFGI_<STRUCT>, as appropriate. 7. Optionally issue a CMD_SYNC, and wait for completion. This must be done if a subsequent software operation, such as enabling device DMA, depends on the SMMU using the new structure. > > @@ -1664,6 +1739,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, > > if (s1_cfg) { > > BUG_ON(ste_live); > > dst[1] = cpu_to_le64( > > + FIELD_PREP(STRTAB_STE_1_S1DSS, STRTAB_STE_1_S1DSS_SSID0) | > > FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) | > > FIELD_PREP(STRTAB_STE_1_S1COR, STRTAB_STE_1_S1C_CACHE_WBRA) | > > FIELD_PREP(STRTAB_STE_1_S1CSH, ARM_SMMU_SH_ISH) | > > @@ -1674,7 +1750,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, > > dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD); > > > > val |= (s1_cfg->table.ptr_dma & STRTAB_STE_0_S1CTXPTR_MASK) | > > - FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS); > > + FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS) | > > + FIELD_PREP(STRTAB_STE_0_S1CDMAX, s1_cfg->s1cdmax) | > > + FIELD_PREP(STRTAB_STE_0_S1FMT, s1_cfg->s1fmt); > Do I understand correctly that each time we update the CD, we also > update the STE. This is not wrong but theoretically this is not needed, > right? Only the primary CD. Once we add SVA (or auxiliary domains) we need to update secondary CDs while the STE is live. This series is just preparation for SVA support. I didn't include the full support because it requires another 25+ patches. > This also explains why you do not need the CMD_PREFETCH_CONFIG with ssid > because you invalidate the config per sid? Hm, I didn't add a CMD_PREFETCH_CONFIG to CDs because I don't know if it's useful. Maybe as future optimization. Thanks, Jean
Hi Jean, On 12/18/19 5:07 PM, Jean-Philippe Brucker wrote: > On Tue, Dec 17, 2019 at 05:43:59PM +0100, Auger Eric wrote: >>> -static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu, >>> - struct arm_smmu_s1_cfg *cfg) >>> +static int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, >>> + int ssid, struct arm_smmu_ctx_desc *cd) >>> { >>> - u64 val; >>> - __le64 *cdptr = cfg->table.ptr; >>> - >>> /* >>> - * We don't need to issue any invalidation here, as we'll invalidate >>> - * the STE when installing the new entry anyway. >>> + * This function handles the following cases: >>> + * >>> + * (1) Install primary CD, for normal DMA traffic (SSID = 0). >>> + * (2) Install a secondary CD, for SID+SSID traffic. >>> + * (3) Update ASID of a CD. Atomically write the first 64 bits of the >>> + * CD, then invalidate the old entry and mappings. >>> + * (4) Remove a secondary CD. >> I see arm_smmu_write_ctx_desc getting called with non null cd in >> arm_smmu_attach_dev but I do not see it removed in the detach path? > > No we don't have to remove the primary CD, since detach clears the STE and > frees the CD tables. OK > >>> */ >>> - val = arm_smmu_cpu_tcr_to_cd(cfg->cd.tcr) | >>> -#ifdef __BIG_ENDIAN >>> - CTXDESC_CD_0_ENDI | >>> -#endif >>> - CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | >>> - CTXDESC_CD_0_AA64 | FIELD_PREP(CTXDESC_CD_0_ASID, cfg->cd.asid) | >>> - CTXDESC_CD_0_V; >>> + u64 val; >>> + bool cd_live; >>> + struct arm_smmu_device *smmu = smmu_domain->smmu; >>> + __le64 *cdptr = smmu_domain->s1_cfg.table.ptr + ssid * >>> + CTXDESC_CD_DWORDS;> >>> - /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ >>> - if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) >>> - val |= CTXDESC_CD_0_S; >>> + val = le64_to_cpu(cdptr[0]); >>> + cd_live = !!(val & CTXDESC_CD_0_V); >>> >>> - cdptr[0] = cpu_to_le64(val); >>> + if (!cd) { /* (4) */ >>> + val = 0; >>> + } else if (cd_live) { /* (3) */ >>> + val &= ~CTXDESC_CD_0_ASID; >>> + val |= FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid); >>> + /* >>> + * Until CD+TLB invalidation, both ASIDs may be used for tagging >>> + * this substream's traffic >>> + */ >>> + } else { /* (1) and (2) */ >>> + cdptr[1] = cpu_to_le64(cd->ttbr & CTXDESC_CD_1_TTB0_MASK); >>> + cdptr[2] = 0; >>> + cdptr[3] = cpu_to_le64(cd->mair); >>> + >>> + /* >>> + * STE is live, and the SMMU might fetch this CD at any >>> + * time. Ensure that it observes the rest of the CD before we >>> + * enable it. >> Mostly, on't you want the invalid state to be seen? Sorry I wanted to say you mostly want to enforce the INVALID bit (what I understand from your below explanations). I was confused by the wording "Ensure that it observes the rest of the CD before we enable it". > > Sorry I didn't get your question. Without the sync, the SMMU could read an > invalid address in CD[1], read V=1 in CD[0] and proceed with dereferencing > the bogus pointer before seeing our update to CD[1]. > > To prevent this we follow the update procedure described in IHI0070Ca > 3.21.3.1 (Configuration structure update procedure): > > Because the SMMU can read any reachable structure at any time, and is not > required to read the double-words of the structure in order, Arm > recommends that the following procedure is used to initialize structures: > 1. Structure starts invalid, having V == 0. > 2. Fill in all fields, leaving V == 0, then perform a DSB operation to > ensure written data is observable from the SMMU. > 3. Issue a CMD_CFGI_<STRUCT>, as appropriate. > 4. Issue a CMD_SYNC, and wait for completion. > 5. Set V to 1, then perform a DSB operation to ensure write is > observable by the SMMU. > 6. Issue CMD_CFGI_<STRUCT>, as appropriate. > 7. Optionally issue a CMD_SYNC, and wait for completion. This must be > done if a subsequent software operation, such as enabling device > DMA, depends on the SMMU using the new structure. > >>> @@ -1664,6 +1739,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, >>> if (s1_cfg) { >>> BUG_ON(ste_live); >>> dst[1] = cpu_to_le64( >>> + FIELD_PREP(STRTAB_STE_1_S1DSS, STRTAB_STE_1_S1DSS_SSID0) | >>> FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) | >>> FIELD_PREP(STRTAB_STE_1_S1COR, STRTAB_STE_1_S1C_CACHE_WBRA) | >>> FIELD_PREP(STRTAB_STE_1_S1CSH, ARM_SMMU_SH_ISH) | >>> @@ -1674,7 +1750,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, >>> dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD); >>> >>> val |= (s1_cfg->table.ptr_dma & STRTAB_STE_0_S1CTXPTR_MASK) | >>> - FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS); >>> + FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS) | >>> + FIELD_PREP(STRTAB_STE_0_S1CDMAX, s1_cfg->s1cdmax) | >>> + FIELD_PREP(STRTAB_STE_0_S1FMT, s1_cfg->s1fmt); >> Do I understand correctly that each time we update the CD, we also >> update the STE. This is not wrong but theoretically this is not needed, >> right? > > Only the primary CD. Once we add SVA (or auxiliary domains) we need to > update secondary CDs while the STE is live. This series is just > preparation for SVA support. I didn't include the full support because it > requires another 25+ patches. OK > >> This also explains why you do not need the CMD_PREFETCH_CONFIG with ssid >> because you invalidate the config per sid? > > Hm, I didn't add a CMD_PREFETCH_CONFIG to CDs because I don't know if it's > useful. Maybe as future optimization. OK Thanks Eric > > Thanks, > Jean >
Hi jean, On 12/9/19 7:05 PM, Jean-Philippe Brucker wrote: > At the moment, the SMMUv3 driver implements only one stage-1 or stage-2 > page directory per device. However SMMUv3 allows more than one address > space for some devices, by providing multiple stage-1 page directories. In > addition to the Stream ID (SID), that identifies a device, we can now have > Substream IDs (SSID) identifying an address space. In PCIe, SID is called > Requester ID (RID) and SSID is called Process Address-Space ID (PASID). > A complete stage-1 walk goes through the context descriptor table: > > Stream tables Ctx. Desc. tables Page tables > +--------+ ,------->+-------+ ,------->+-------+ > : : | : : | : : > +--------+ | +-------+ | +-------+ > SID->| STE |---' SSID->| CD |---' IOVA->| PTE |--> IPA > +--------+ +-------+ +-------+ > : : : : : : > +--------+ +-------+ +-------+ > > Rewrite arm_smmu_write_ctx_desc() to modify context descriptor table > entries. To keep things simple we only implement one level of context > descriptor tables here, but as with stream and page tables, an SSID can > be split to index multiple levels of tables. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Thanks Eric > --- > drivers/iommu/arm-smmu-v3.c | 125 +++++++++++++++++++++++++++++------- > 1 file changed, 102 insertions(+), 23 deletions(-) > > diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c > index 43d6a7ded6e4..a01071123c34 100644 > --- a/drivers/iommu/arm-smmu-v3.c > +++ b/drivers/iommu/arm-smmu-v3.c > @@ -227,6 +227,11 @@ > #define STRTAB_STE_0_S1CTXPTR_MASK GENMASK_ULL(51, 6) > #define STRTAB_STE_0_S1CDMAX GENMASK_ULL(63, 59) > > +#define STRTAB_STE_1_S1DSS GENMASK_ULL(1, 0) > +#define STRTAB_STE_1_S1DSS_TERMINATE 0x0 > +#define STRTAB_STE_1_S1DSS_BYPASS 0x1 > +#define STRTAB_STE_1_S1DSS_SSID0 0x2 > + > #define STRTAB_STE_1_S1C_CACHE_NC 0UL > #define STRTAB_STE_1_S1C_CACHE_WBRA 1UL > #define STRTAB_STE_1_S1C_CACHE_WT 2UL > @@ -329,6 +334,7 @@ > #define CMDQ_PREFETCH_1_SIZE GENMASK_ULL(4, 0) > #define CMDQ_PREFETCH_1_ADDR_MASK GENMASK_ULL(63, 12) > > +#define CMDQ_CFGI_0_SSID GENMASK_ULL(31, 12) > #define CMDQ_CFGI_0_SID GENMASK_ULL(63, 32) > #define CMDQ_CFGI_1_LEAF (1UL << 0) > #define CMDQ_CFGI_1_RANGE GENMASK_ULL(4, 0) > @@ -446,8 +452,11 @@ struct arm_smmu_cmdq_ent { > > #define CMDQ_OP_CFGI_STE 0x3 > #define CMDQ_OP_CFGI_ALL 0x4 > + #define CMDQ_OP_CFGI_CD 0x5 > + #define CMDQ_OP_CFGI_CD_ALL 0x6 > struct { > u32 sid; > + u32 ssid; > union { > bool leaf; > u8 span; > @@ -568,6 +577,7 @@ struct arm_smmu_cd_table { > struct arm_smmu_s1_cfg { > struct arm_smmu_cd_table table; > struct arm_smmu_ctx_desc cd; > + u8 s1fmt; > u8 s1cdmax; > }; > > @@ -860,10 +870,16 @@ static int arm_smmu_cmdq_build_cmd(u64 *cmd, struct arm_smmu_cmdq_ent *ent) > cmd[1] |= FIELD_PREP(CMDQ_PREFETCH_1_SIZE, ent->prefetch.size); > cmd[1] |= ent->prefetch.addr & CMDQ_PREFETCH_1_ADDR_MASK; > break; > + case CMDQ_OP_CFGI_CD: > + cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SSID, ent->cfgi.ssid); > + /* Fallthrough */ > case CMDQ_OP_CFGI_STE: > cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SID, ent->cfgi.sid); > cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_LEAF, ent->cfgi.leaf); > break; > + case CMDQ_OP_CFGI_CD_ALL: > + cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SID, ent->cfgi.sid); > + break; > case CMDQ_OP_CFGI_ALL: > /* Cover the entire SID range */ > cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_RANGE, 31); > @@ -1456,6 +1472,33 @@ static int arm_smmu_cmdq_issue_sync(struct arm_smmu_device *smmu) > } > > /* Context descriptor manipulation functions */ > +static void arm_smmu_sync_cd(struct arm_smmu_domain *smmu_domain, > + int ssid, bool leaf) > +{ > + size_t i; > + unsigned long flags; > + struct arm_smmu_master *master; > + struct arm_smmu_device *smmu = smmu_domain->smmu; > + struct arm_smmu_cmdq_ent cmd = { > + .opcode = CMDQ_OP_CFGI_CD, > + .cfgi = { > + .ssid = ssid, > + .leaf = leaf, > + }, > + }; > + > + spin_lock_irqsave(&smmu_domain->devices_lock, flags); > + list_for_each_entry(master, &smmu_domain->devices, domain_head) { > + for (i = 0; i < master->num_sids; i++) { > + cmd.cfgi.sid = master->sids[i]; > + arm_smmu_cmdq_issue_cmd(smmu, &cmd); > + } > + } > + spin_unlock_irqrestore(&smmu_domain->devices_lock, flags); > + > + arm_smmu_cmdq_issue_sync(smmu); > +} > + > static int arm_smmu_alloc_cd_leaf_table(struct arm_smmu_device *smmu, > struct arm_smmu_cd_table *table, > size_t num_entries) > @@ -1498,34 +1541,65 @@ static u64 arm_smmu_cpu_tcr_to_cd(u64 tcr) > return val; > } > > -static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu, > - struct arm_smmu_s1_cfg *cfg) > +static int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, > + int ssid, struct arm_smmu_ctx_desc *cd) > { > - u64 val; > - __le64 *cdptr = cfg->table.ptr; > - > /* > - * We don't need to issue any invalidation here, as we'll invalidate > - * the STE when installing the new entry anyway. > + * This function handles the following cases: > + * > + * (1) Install primary CD, for normal DMA traffic (SSID = 0). > + * (2) Install a secondary CD, for SID+SSID traffic. > + * (3) Update ASID of a CD. Atomically write the first 64 bits of the > + * CD, then invalidate the old entry and mappings. > + * (4) Remove a secondary CD. > */ > - val = arm_smmu_cpu_tcr_to_cd(cfg->cd.tcr) | > -#ifdef __BIG_ENDIAN > - CTXDESC_CD_0_ENDI | > -#endif > - CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | > - CTXDESC_CD_0_AA64 | FIELD_PREP(CTXDESC_CD_0_ASID, cfg->cd.asid) | > - CTXDESC_CD_0_V; > + u64 val; > + bool cd_live; > + struct arm_smmu_device *smmu = smmu_domain->smmu; > + __le64 *cdptr = smmu_domain->s1_cfg.table.ptr + ssid * > + CTXDESC_CD_DWORDS; > > - /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ > - if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) > - val |= CTXDESC_CD_0_S; > + val = le64_to_cpu(cdptr[0]); > + cd_live = !!(val & CTXDESC_CD_0_V); > > - cdptr[0] = cpu_to_le64(val); > + if (!cd) { /* (4) */ > + val = 0; > + } else if (cd_live) { /* (3) */ > + val &= ~CTXDESC_CD_0_ASID; > + val |= FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid); > + /* > + * Until CD+TLB invalidation, both ASIDs may be used for tagging > + * this substream's traffic > + */ > + } else { /* (1) and (2) */ > + cdptr[1] = cpu_to_le64(cd->ttbr & CTXDESC_CD_1_TTB0_MASK); > + cdptr[2] = 0; > + cdptr[3] = cpu_to_le64(cd->mair); > + > + /* > + * STE is live, and the SMMU might fetch this CD at any > + * time. Ensure that it observes the rest of the CD before we > + * enable it. > + */ > + arm_smmu_sync_cd(smmu_domain, ssid, true); > > - val = cfg->cd.ttbr & CTXDESC_CD_1_TTB0_MASK; > - cdptr[1] = cpu_to_le64(val); > + val = arm_smmu_cpu_tcr_to_cd(cd->tcr) | > +#ifdef __BIG_ENDIAN > + CTXDESC_CD_0_ENDI | > +#endif > + CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | > + CTXDESC_CD_0_AA64 | > + FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid) | > + CTXDESC_CD_0_V; > > - cdptr[3] = cpu_to_le64(cfg->cd.mair); > + /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ > + if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) > + val |= CTXDESC_CD_0_S; > + } > + > + WRITE_ONCE(cdptr[0], cpu_to_le64(val)); > + arm_smmu_sync_cd(smmu_domain, ssid, true); > + return 0; > } > > static int arm_smmu_alloc_cd_tables(struct arm_smmu_domain *smmu_domain) > @@ -1533,6 +1607,7 @@ static int arm_smmu_alloc_cd_tables(struct arm_smmu_domain *smmu_domain) > struct arm_smmu_device *smmu = smmu_domain->smmu; > struct arm_smmu_s1_cfg *cfg = &smmu_domain->s1_cfg; > > + cfg->s1fmt = STRTAB_STE_0_S1FMT_LINEAR; > return arm_smmu_alloc_cd_leaf_table(smmu, &cfg->table, > 1 << cfg->s1cdmax); > } > @@ -1664,6 +1739,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, > if (s1_cfg) { > BUG_ON(ste_live); > dst[1] = cpu_to_le64( > + FIELD_PREP(STRTAB_STE_1_S1DSS, STRTAB_STE_1_S1DSS_SSID0) | > FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) | > FIELD_PREP(STRTAB_STE_1_S1COR, STRTAB_STE_1_S1C_CACHE_WBRA) | > FIELD_PREP(STRTAB_STE_1_S1CSH, ARM_SMMU_SH_ISH) | > @@ -1674,7 +1750,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, > dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD); > > val |= (s1_cfg->table.ptr_dma & STRTAB_STE_0_S1CTXPTR_MASK) | > - FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS); > + FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS) | > + FIELD_PREP(STRTAB_STE_0_S1CDMAX, s1_cfg->s1cdmax) | > + FIELD_PREP(STRTAB_STE_0_S1FMT, s1_cfg->s1fmt); > } > > if (s2_cfg) { > @@ -2479,7 +2557,8 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) > master->ats_enabled = arm_smmu_ats_supported(master); > > if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) > - arm_smmu_write_ctx_desc(smmu, &smmu_domain->s1_cfg); > + arm_smmu_write_ctx_desc(smmu_domain, 0, > + &smmu_domain->s1_cfg.cd); > > arm_smmu_install_ste_for_dev(master); > >
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 43d6a7ded6e4..a01071123c34 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -227,6 +227,11 @@ #define STRTAB_STE_0_S1CTXPTR_MASK GENMASK_ULL(51, 6) #define STRTAB_STE_0_S1CDMAX GENMASK_ULL(63, 59) +#define STRTAB_STE_1_S1DSS GENMASK_ULL(1, 0) +#define STRTAB_STE_1_S1DSS_TERMINATE 0x0 +#define STRTAB_STE_1_S1DSS_BYPASS 0x1 +#define STRTAB_STE_1_S1DSS_SSID0 0x2 + #define STRTAB_STE_1_S1C_CACHE_NC 0UL #define STRTAB_STE_1_S1C_CACHE_WBRA 1UL #define STRTAB_STE_1_S1C_CACHE_WT 2UL @@ -329,6 +334,7 @@ #define CMDQ_PREFETCH_1_SIZE GENMASK_ULL(4, 0) #define CMDQ_PREFETCH_1_ADDR_MASK GENMASK_ULL(63, 12) +#define CMDQ_CFGI_0_SSID GENMASK_ULL(31, 12) #define CMDQ_CFGI_0_SID GENMASK_ULL(63, 32) #define CMDQ_CFGI_1_LEAF (1UL << 0) #define CMDQ_CFGI_1_RANGE GENMASK_ULL(4, 0) @@ -446,8 +452,11 @@ struct arm_smmu_cmdq_ent { #define CMDQ_OP_CFGI_STE 0x3 #define CMDQ_OP_CFGI_ALL 0x4 + #define CMDQ_OP_CFGI_CD 0x5 + #define CMDQ_OP_CFGI_CD_ALL 0x6 struct { u32 sid; + u32 ssid; union { bool leaf; u8 span; @@ -568,6 +577,7 @@ struct arm_smmu_cd_table { struct arm_smmu_s1_cfg { struct arm_smmu_cd_table table; struct arm_smmu_ctx_desc cd; + u8 s1fmt; u8 s1cdmax; }; @@ -860,10 +870,16 @@ static int arm_smmu_cmdq_build_cmd(u64 *cmd, struct arm_smmu_cmdq_ent *ent) cmd[1] |= FIELD_PREP(CMDQ_PREFETCH_1_SIZE, ent->prefetch.size); cmd[1] |= ent->prefetch.addr & CMDQ_PREFETCH_1_ADDR_MASK; break; + case CMDQ_OP_CFGI_CD: + cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SSID, ent->cfgi.ssid); + /* Fallthrough */ case CMDQ_OP_CFGI_STE: cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SID, ent->cfgi.sid); cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_LEAF, ent->cfgi.leaf); break; + case CMDQ_OP_CFGI_CD_ALL: + cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SID, ent->cfgi.sid); + break; case CMDQ_OP_CFGI_ALL: /* Cover the entire SID range */ cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_RANGE, 31); @@ -1456,6 +1472,33 @@ static int arm_smmu_cmdq_issue_sync(struct arm_smmu_device *smmu) } /* Context descriptor manipulation functions */ +static void arm_smmu_sync_cd(struct arm_smmu_domain *smmu_domain, + int ssid, bool leaf) +{ + size_t i; + unsigned long flags; + struct arm_smmu_master *master; + struct arm_smmu_device *smmu = smmu_domain->smmu; + struct arm_smmu_cmdq_ent cmd = { + .opcode = CMDQ_OP_CFGI_CD, + .cfgi = { + .ssid = ssid, + .leaf = leaf, + }, + }; + + spin_lock_irqsave(&smmu_domain->devices_lock, flags); + list_for_each_entry(master, &smmu_domain->devices, domain_head) { + for (i = 0; i < master->num_sids; i++) { + cmd.cfgi.sid = master->sids[i]; + arm_smmu_cmdq_issue_cmd(smmu, &cmd); + } + } + spin_unlock_irqrestore(&smmu_domain->devices_lock, flags); + + arm_smmu_cmdq_issue_sync(smmu); +} + static int arm_smmu_alloc_cd_leaf_table(struct arm_smmu_device *smmu, struct arm_smmu_cd_table *table, size_t num_entries) @@ -1498,34 +1541,65 @@ static u64 arm_smmu_cpu_tcr_to_cd(u64 tcr) return val; } -static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu, - struct arm_smmu_s1_cfg *cfg) +static int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, + int ssid, struct arm_smmu_ctx_desc *cd) { - u64 val; - __le64 *cdptr = cfg->table.ptr; - /* - * We don't need to issue any invalidation here, as we'll invalidate - * the STE when installing the new entry anyway. + * This function handles the following cases: + * + * (1) Install primary CD, for normal DMA traffic (SSID = 0). + * (2) Install a secondary CD, for SID+SSID traffic. + * (3) Update ASID of a CD. Atomically write the first 64 bits of the + * CD, then invalidate the old entry and mappings. + * (4) Remove a secondary CD. */ - val = arm_smmu_cpu_tcr_to_cd(cfg->cd.tcr) | -#ifdef __BIG_ENDIAN - CTXDESC_CD_0_ENDI | -#endif - CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | - CTXDESC_CD_0_AA64 | FIELD_PREP(CTXDESC_CD_0_ASID, cfg->cd.asid) | - CTXDESC_CD_0_V; + u64 val; + bool cd_live; + struct arm_smmu_device *smmu = smmu_domain->smmu; + __le64 *cdptr = smmu_domain->s1_cfg.table.ptr + ssid * + CTXDESC_CD_DWORDS; - /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ - if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) - val |= CTXDESC_CD_0_S; + val = le64_to_cpu(cdptr[0]); + cd_live = !!(val & CTXDESC_CD_0_V); - cdptr[0] = cpu_to_le64(val); + if (!cd) { /* (4) */ + val = 0; + } else if (cd_live) { /* (3) */ + val &= ~CTXDESC_CD_0_ASID; + val |= FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid); + /* + * Until CD+TLB invalidation, both ASIDs may be used for tagging + * this substream's traffic + */ + } else { /* (1) and (2) */ + cdptr[1] = cpu_to_le64(cd->ttbr & CTXDESC_CD_1_TTB0_MASK); + cdptr[2] = 0; + cdptr[3] = cpu_to_le64(cd->mair); + + /* + * STE is live, and the SMMU might fetch this CD at any + * time. Ensure that it observes the rest of the CD before we + * enable it. + */ + arm_smmu_sync_cd(smmu_domain, ssid, true); - val = cfg->cd.ttbr & CTXDESC_CD_1_TTB0_MASK; - cdptr[1] = cpu_to_le64(val); + val = arm_smmu_cpu_tcr_to_cd(cd->tcr) | +#ifdef __BIG_ENDIAN + CTXDESC_CD_0_ENDI | +#endif + CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET | + CTXDESC_CD_0_AA64 | + FIELD_PREP(CTXDESC_CD_0_ASID, cd->asid) | + CTXDESC_CD_0_V; - cdptr[3] = cpu_to_le64(cfg->cd.mair); + /* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */ + if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE) + val |= CTXDESC_CD_0_S; + } + + WRITE_ONCE(cdptr[0], cpu_to_le64(val)); + arm_smmu_sync_cd(smmu_domain, ssid, true); + return 0; } static int arm_smmu_alloc_cd_tables(struct arm_smmu_domain *smmu_domain) @@ -1533,6 +1607,7 @@ static int arm_smmu_alloc_cd_tables(struct arm_smmu_domain *smmu_domain) struct arm_smmu_device *smmu = smmu_domain->smmu; struct arm_smmu_s1_cfg *cfg = &smmu_domain->s1_cfg; + cfg->s1fmt = STRTAB_STE_0_S1FMT_LINEAR; return arm_smmu_alloc_cd_leaf_table(smmu, &cfg->table, 1 << cfg->s1cdmax); } @@ -1664,6 +1739,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, if (s1_cfg) { BUG_ON(ste_live); dst[1] = cpu_to_le64( + FIELD_PREP(STRTAB_STE_1_S1DSS, STRTAB_STE_1_S1DSS_SSID0) | FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) | FIELD_PREP(STRTAB_STE_1_S1COR, STRTAB_STE_1_S1C_CACHE_WBRA) | FIELD_PREP(STRTAB_STE_1_S1CSH, ARM_SMMU_SH_ISH) | @@ -1674,7 +1750,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid, dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD); val |= (s1_cfg->table.ptr_dma & STRTAB_STE_0_S1CTXPTR_MASK) | - FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS); + FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS) | + FIELD_PREP(STRTAB_STE_0_S1CDMAX, s1_cfg->s1cdmax) | + FIELD_PREP(STRTAB_STE_0_S1FMT, s1_cfg->s1fmt); } if (s2_cfg) { @@ -2479,7 +2557,8 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) master->ats_enabled = arm_smmu_ats_supported(master); if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) - arm_smmu_write_ctx_desc(smmu, &smmu_domain->s1_cfg); + arm_smmu_write_ctx_desc(smmu_domain, 0, + &smmu_domain->s1_cfg.cd); arm_smmu_install_ste_for_dev(master);
At the moment, the SMMUv3 driver implements only one stage-1 or stage-2 page directory per device. However SMMUv3 allows more than one address space for some devices, by providing multiple stage-1 page directories. In addition to the Stream ID (SID), that identifies a device, we can now have Substream IDs (SSID) identifying an address space. In PCIe, SID is called Requester ID (RID) and SSID is called Process Address-Space ID (PASID). A complete stage-1 walk goes through the context descriptor table: Stream tables Ctx. Desc. tables Page tables +--------+ ,------->+-------+ ,------->+-------+ : : | : : | : : +--------+ | +-------+ | +-------+ SID->| STE |---' SSID->| CD |---' IOVA->| PTE |--> IPA +--------+ +-------+ +-------+ : : : : : : +--------+ +-------+ +-------+ Rewrite arm_smmu_write_ctx_desc() to modify context descriptor table entries. To keep things simple we only implement one level of context descriptor tables here, but as with stream and page tables, an SSID can be split to index multiple levels of tables. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> --- drivers/iommu/arm-smmu-v3.c | 125 +++++++++++++++++++++++++++++------- 1 file changed, 102 insertions(+), 23 deletions(-)