| Message ID | 20200102095631.1165-1-kishon@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Thu, 2 Jan 2020 15:26:31 +0530, Kishon Vijay Abraham I wrote: > Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a > PHY but a wrapper used to configure some of the input signals to the > SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G) > SERDES] > Signed-off-by: Jyri Sarha <jsarha@ti.com> > --- > Changes from v4: > *) Fixed the indentation as suggested by Rob v4 > > .../bindings/phy/ti,phy-j721e-wiz.yaml | 204 ++++++++++++++++++ > 1 file changed, 204 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
On 04/01/20 4:04 AM, Rob Herring wrote: > On Thu, 2 Jan 2020 15:26:31 +0530, Kishon Vijay Abraham I wrote: >> Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a >> PHY but a wrapper used to configure some of the input signals to the >> SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G) >> SERDES] >> Signed-off-by: Jyri Sarha <jsarha@ti.com> >> --- >> Changes from v4: >> *) Fixed the indentation as suggested by Rob v4 >> >> .../bindings/phy/ti,phy-j721e-wiz.yaml | 204 ++++++++++++++++++ >> 1 file changed, 204 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml >> > > Reviewed-by: Rob Herring <robh@kernel.org> Thank you Rob! -Kishon
On Thu, Jan 2, 2020 at 3:54 AM Kishon Vijay Abraham I <kishon@ti.com> wrote: > > Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a > PHY but a wrapper used to configure some of the input signals to the > SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G) > SERDES] > Signed-off-by: Jyri Sarha <jsarha@ti.com> > --- > Changes from v4: > *) Fixed the indentation as suggested by Rob v4 > > .../bindings/phy/ti,phy-j721e-wiz.yaml | 204 ++++++++++++++++++ > 1 file changed, 204 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > > diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > new file mode 100644 > index 000000000000..e010ea46b88d > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > @@ -0,0 +1,204 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: TI J721E WIZ (SERDES Wrapper) > + > +maintainers: > + - Kishon Vijay Abraham I <kishon@ti.com> > + > +properties: > + compatible: > + enum: > + - ti,j721e-wiz-16g > + - ti,j721e-wiz-10g > + > + power-domains: > + maxItems: 1 > + > + clocks: > + maxItems: 3 > + description: clock-specifier to represent input to the WIZ > + > + clock-names: > + items: > + - const: fck > + - const: core_ref_clk > + - const: ext_ref_clk > + > + num-lanes: > + minimum: 1 > + maximum: 4 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 1 > + > + "#reset-cells": > + const: 1 > + > + ranges: true > + > + assigned-clocks: > + maxItems: 2 > + > + assigned-clock-parents: > + maxItems: 2 > + > +patternProperties: > + "^pll[0|1]-refclk$": > + type: object > + description: | > + WIZ node should have subnodes for each of the PLLs present in > + the SERDES. > + properties: > + clocks: > + maxItems: 2 > + description: Phandle to clock nodes representing the two inputs to PLL. > + > + "#clock-cells": > + const: 0 > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 > + > + required: > + - clocks > + - "#clock-cells" > + - assigned-clocks > + - assigned-clock-parents > + > + "^cmn-refclk1?-dig-div$": > + type: object > + description: > + WIZ node should have subnodes for each of the PMA common refclock > + provided by the SERDES. > + properties: > + clocks: > + maxItems: 1 > + description: Phandle to the clock node representing the input to the > + divider clock. > + > + "#clock-cells": > + const: 0 > + > + required: > + - clocks > + - "#clock-cells" > + > + "^refclk-dig$": > + type: object > + description: | > + WIZ node should have subnode for refclk_dig to select the reference > + clock source for the reference clock used in the PHY and PMA digital > + logic. > + properties: > + clocks: > + maxItems: 4 > + description: Phandle to four clock nodes representing the inputs to > + refclk_dig > + > + "#clock-cells": > + const: 0 > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 > + > + required: > + - clocks > + - "#clock-cells" > + - assigned-clocks > + - assigned-clock-parents > + > + "^serdes@[0-9a-f]+$": > + type: object > + description: | > + WIZ node should have '1' subnode for the SERDES. It could be either > + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the > + bindings specified in > + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt > + Torrent SERDES should follow the bindings specified in > + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt > + > +required: > + - compatible > + - power-domains > + - clocks > + - clock-names > + - num-lanes > + - "#address-cells" > + - "#size-cells" > + - "#reset-cells" > + - ranges > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + > + wiz@5000000 { > + compatible = "ti,j721e-wiz-16g"; > + #address-cells = <1>; > + #size-cells = <1>; > + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; > + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; > + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; > + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; > + num-lanes = <2>; > + #reset-cells = <1>; > + ranges = <0x5000000 0x0 0x5000000 0x10000>; This fails in linux-next: Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.example.dts:30.16-59: Warning (ranges_format): /example-0/wiz@50 00000:ranges: "ranges" property has invalid length (16 bytes) (parent #address-cells == 1, child #address-cells == 1, # size-cells == 1) Please fix. Rob
Hi Rob, On 13/01/20 11:29 PM, Rob Herring wrote: > On Thu, Jan 2, 2020 at 3:54 AM Kishon Vijay Abraham I <kishon@ti.com> wrote: >> >> Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a >> PHY but a wrapper used to configure some of the input signals to the >> SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G) >> SERDES] >> Signed-off-by: Jyri Sarha <jsarha@ti.com> >> --- >> Changes from v4: >> *) Fixed the indentation as suggested by Rob v4 >> >> .../bindings/phy/ti,phy-j721e-wiz.yaml | 204 ++++++++++++++++++ >> 1 file changed, 204 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml >> >> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml >> new file mode 100644 >> index 000000000000..e010ea46b88d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml >> @@ -0,0 +1,204 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ >> +%YAML 1.2 >> +--- >> +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#" >> + >> +title: TI J721E WIZ (SERDES Wrapper) >> + >> +maintainers: >> + - Kishon Vijay Abraham I <kishon@ti.com> >> + >> +properties: >> + compatible: >> + enum: >> + - ti,j721e-wiz-16g >> + - ti,j721e-wiz-10g >> + >> + power-domains: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 3 >> + description: clock-specifier to represent input to the WIZ >> + >> + clock-names: >> + items: >> + - const: fck >> + - const: core_ref_clk >> + - const: ext_ref_clk >> + >> + num-lanes: >> + minimum: 1 >> + maximum: 4 >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 1 >> + >> + "#reset-cells": >> + const: 1 >> + >> + ranges: true >> + >> + assigned-clocks: >> + maxItems: 2 >> + >> + assigned-clock-parents: >> + maxItems: 2 >> + >> +patternProperties: >> + "^pll[0|1]-refclk$": >> + type: object >> + description: | >> + WIZ node should have subnodes for each of the PLLs present in >> + the SERDES. >> + properties: >> + clocks: >> + maxItems: 2 >> + description: Phandle to clock nodes representing the two inputs to PLL. >> + >> + "#clock-cells": >> + const: 0 >> + >> + assigned-clocks: >> + maxItems: 1 >> + >> + assigned-clock-parents: >> + maxItems: 1 >> + >> + required: >> + - clocks >> + - "#clock-cells" >> + - assigned-clocks >> + - assigned-clock-parents >> + >> + "^cmn-refclk1?-dig-div$": >> + type: object >> + description: >> + WIZ node should have subnodes for each of the PMA common refclock >> + provided by the SERDES. >> + properties: >> + clocks: >> + maxItems: 1 >> + description: Phandle to the clock node representing the input to the >> + divider clock. >> + >> + "#clock-cells": >> + const: 0 >> + >> + required: >> + - clocks >> + - "#clock-cells" >> + >> + "^refclk-dig$": >> + type: object >> + description: | >> + WIZ node should have subnode for refclk_dig to select the reference >> + clock source for the reference clock used in the PHY and PMA digital >> + logic. >> + properties: >> + clocks: >> + maxItems: 4 >> + description: Phandle to four clock nodes representing the inputs to >> + refclk_dig >> + >> + "#clock-cells": >> + const: 0 >> + >> + assigned-clocks: >> + maxItems: 1 >> + >> + assigned-clock-parents: >> + maxItems: 1 >> + >> + required: >> + - clocks >> + - "#clock-cells" >> + - assigned-clocks >> + - assigned-clock-parents >> + >> + "^serdes@[0-9a-f]+$": >> + type: object >> + description: | >> + WIZ node should have '1' subnode for the SERDES. It could be either >> + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the >> + bindings specified in >> + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt >> + Torrent SERDES should follow the bindings specified in >> + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt >> + >> +required: >> + - compatible >> + - power-domains >> + - clocks >> + - clock-names >> + - num-lanes >> + - "#address-cells" >> + - "#size-cells" >> + - "#reset-cells" >> + - ranges >> + >> +examples: >> + - | >> + #include <dt-bindings/soc/ti,sci_pm_domain.h> >> + >> + wiz@5000000 { >> + compatible = "ti,j721e-wiz-16g"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; >> + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; >> + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; >> + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; >> + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; >> + num-lanes = <2>; >> + #reset-cells = <1>; >> + ranges = <0x5000000 0x0 0x5000000 0x10000>; > > This fails in linux-next: > > Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.example.dts:30.16-59: > Warning (ranges_format): /example-0/wiz@50 > 00000:ranges: "ranges" property has invalid length (16 bytes) (parent > #address-cells == 1, child #address-cells == 1, # > size-cells == 1) > > Please fix. Fixed and pushed. Thanks Kishon > > Rob >
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml new file mode 100644 index 000000000000..e010ea46b88d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI J721E WIZ (SERDES Wrapper) + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +properties: + compatible: + enum: + - ti,j721e-wiz-16g + - ti,j721e-wiz-10g + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + description: clock-specifier to represent input to the WIZ + + clock-names: + items: + - const: fck + - const: core_ref_clk + - const: ext_ref_clk + + num-lanes: + minimum: 1 + maximum: 4 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#reset-cells": + const: 1 + + ranges: true + + assigned-clocks: + maxItems: 2 + + assigned-clock-parents: + maxItems: 2 + +patternProperties: + "^pll[0|1]-refclk$": + type: object + description: | + WIZ node should have subnodes for each of the PLLs present in + the SERDES. + properties: + clocks: + maxItems: 2 + description: Phandle to clock nodes representing the two inputs to PLL. + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^cmn-refclk1?-dig-div$": + type: object + description: + WIZ node should have subnodes for each of the PMA common refclock + provided by the SERDES. + properties: + clocks: + maxItems: 1 + description: Phandle to the clock node representing the input to the + divider clock. + + "#clock-cells": + const: 0 + + required: + - clocks + - "#clock-cells" + + "^refclk-dig$": + type: object + description: | + WIZ node should have subnode for refclk_dig to select the reference + clock source for the reference clock used in the PHY and PMA digital + logic. + properties: + clocks: + maxItems: 4 + description: Phandle to four clock nodes representing the inputs to + refclk_dig + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^serdes@[0-9a-f]+$": + type: object + description: | + WIZ node should have '1' subnode for the SERDES. It could be either + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the + bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt + Torrent SERDES should follow the bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt + +required: + - compatible + - power-domains + - clocks + - clock-names + - num-lanes + - "#address-cells" + - "#size-cells" + - "#reset-cells" + - ranges + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + wiz@5000000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5000000 0x0 0x5000000 0x10000>; + + pll0-refclk { + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll0_refclk>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + pll1-refclk { + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&k3_clks 293 0>; + }; + + cmn-refclk-dig-div { + clocks = <&wiz1_refclk_dig>; + #clock-cells = <0>; + }; + + cmn-refclk1-dig-div { + clocks = <&wiz1_pll1_refclk>; + #clock-cells = <0>; + }; + + refclk-dig { + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + serdes@5000000 { + compatible = "cdns,ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz0 0>; + reset-names = "sierra_reset"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + };