| Message ID | 1576867954-17756-1-git-send-email-kuldeep.singh@nxp.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 73d582606a8b1c26db9ad52ad38fe8ba3fcf1ae5 |
| Headers | show |
| Series | arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB | expand |
On Sat, Dec 21, 2019 at 12:22:34AM +0530, Kuldeep Singh wrote: > LS2088ADB has one spansion flash s25fs512s of size 64M. > > Add qspi dts entry for the board using compatibles as "jedec,spi-nor" to > probe flash successfully. Also, align properties with other board dts > properties. > > Use dt-bindings constants in interrupts instead of using numbers. > > Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 6fd7f63085c9..d0d670227ae2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -108,7 +108,15 @@ }; &qspi { - status = "disabled"; + status = "okay"; + + s25fs512s0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; }; &sata0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 8b2fd278844b..f96d06da96be 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -618,16 +618,16 @@ }; qspi: spi@20c0000 { - status = "disabled"; compatible = "fsl,ls2080a-qspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <0 25 0x4>; /* Level high type */ + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; clock-names = "qspi_en", "qspi"; + status = "disabled"; }; pcie1: pcie@3400000 {
LS2088ADB has one spansion flash s25fs512s of size 64M. Add qspi dts entry for the board using compatibles as "jedec,spi-nor" to probe flash successfully. Also, align properties with other board dts properties. Use dt-bindings constants in interrupts instead of using numbers. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 10 +++++++++- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++-- 2 files changed, 11 insertions(+), 3 deletions(-)