mbox series

[v5,0/6] Raspberry Pi 4 PCIe support

Message ID 20191216110113.30436-1-nsaenzjulienne@suse.de (mailing list archive)
Headers show
Series Raspberry Pi 4 PCIe support | expand

Message

Nicolas Saenz Julienne Dec. 16, 2019, 11:01 a.m. UTC 
This series aims at providing support for Raspberry Pi 4's PCIe
controller, which is also shared with the Broadcom STB family of
devices.

There was a previous attempt to upstream this some years ago[1] but was
blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
is something currently not supported by the kernel.  Luckily this is not
the case for the Raspberry Pi 4.

Note the series is based on top of linux next, as the DTS patch depends
on it.

[1] https://patchwork.kernel.org/cover/10605933/
[2] https://patchwork.kernel.org/patch/10605957/

---

Changes since v4:
  - Rebase DTS patch
  - Respin log2.h code into it's own series as it's still contentious
    yet mostly unrelated to the PCIe part

Changes since v3:
  - Moved all the log2.h related changes at the end of the series, as I
    presume they will be contentious and I don't want the PCIe patches
    to depend on them. Ultimately I think I'll respin them on their own
    series but wanted to keep them in for this submission just for the
    sake of continuity.
  - Addressed small nits here and there.

Changes since v2:
  - Redo register access in driver avoiding indirection while keeping
    the naming intact
  - Add patch editing ARM64's config
  - Last MSI cleanups, notably removing MSIX flag
  - Got rid of all _RB writes
  - Got rid of all of_data
  - Overall churn removal
  - Address the rest of Andrew's comments

Changes since v1:
  - add generic rounddown/roundup_pow_two64() patch
  - Add MAINTAINERS patch
  - Fix Kconfig
  - Cleanup probe, use up to date APIs, exit on MSI failure
  - Get rid of linux,pci-domain and other unused constructs
  - Use edge triggered setup for MSI
  - Cleanup MSI implementation
  - Fix multiple cosmetic issues
  - Remove supend/resume code

Jim Quinlan (3):
  dt-bindings: PCI: Add bindings for brcmstb's PCIe device
  PCI: brcmstb: Add Broadcom STB PCIe host controller driver
  PCI: brcmstb: Add MSI support

Nicolas Saenz Julienne (3):
  ARM: dts: bcm2711: Enable PCIe controller
  MAINTAINERS: Add brcmstb PCIe controller
  arm64: defconfig: Enable Broadcom's STB PCIe controller

 .../bindings/pci/brcm,stb-pcie.yaml           |   97 ++
 MAINTAINERS                                   |    4 +
 arch/arm/boot/dts/bcm2711.dtsi                |   31 +-
 arch/arm64/configs/defconfig                  |    1 +
 drivers/pci/controller/Kconfig                |    9 +
 drivers/pci/controller/Makefile               |    1 +
 drivers/pci/controller/pcie-brcmstb.c         | 1007 +++++++++++++++++
 7 files changed, 1149 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 create mode 100644 drivers/pci/controller/pcie-brcmstb.c

Comments

Andrew Murray Dec. 16, 2019, 11:36 a.m. UTC | #1 
On Mon, Dec 16, 2019 at 12:01:06PM +0100, Nicolas Saenz Julienne wrote:
> This series aims at providing support for Raspberry Pi 4's PCIe
> controller, which is also shared with the Broadcom STB family of
> devices.
> 
> There was a previous attempt to upstream this some years ago[1] but was
> blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> is something currently not supported by the kernel.  Luckily this is not
> the case for the Raspberry Pi 4.
> 

Hi Nicolas,

This series looks good to me now. Unless there is further feedback I'll ask
Lorenzo to merge this when he returns in the new year.

Thanks for the log2.h efforts - perhaps this can be picked up again one day.

Thanks,

Andrew Murray

> Note the series is based on top of linux next, as the DTS patch depends
> on it.
> 
> [1] https://patchwork.kernel.org/cover/10605933/
> [2] https://patchwork.kernel.org/patch/10605957/
> 
> ---
> 
> Changes since v4:
>   - Rebase DTS patch
>   - Respin log2.h code into it's own series as it's still contentious
>     yet mostly unrelated to the PCIe part
> 
> Changes since v3:
>   - Moved all the log2.h related changes at the end of the series, as I
>     presume they will be contentious and I don't want the PCIe patches
>     to depend on them. Ultimately I think I'll respin them on their own
>     series but wanted to keep them in for this submission just for the
>     sake of continuity.
>   - Addressed small nits here and there.
> 
> Changes since v2:
>   - Redo register access in driver avoiding indirection while keeping
>     the naming intact
>   - Add patch editing ARM64's config
>   - Last MSI cleanups, notably removing MSIX flag
>   - Got rid of all _RB writes
>   - Got rid of all of_data
>   - Overall churn removal
>   - Address the rest of Andrew's comments
> 
> Changes since v1:
>   - add generic rounddown/roundup_pow_two64() patch
>   - Add MAINTAINERS patch
>   - Fix Kconfig
>   - Cleanup probe, use up to date APIs, exit on MSI failure
>   - Get rid of linux,pci-domain and other unused constructs
>   - Use edge triggered setup for MSI
>   - Cleanup MSI implementation
>   - Fix multiple cosmetic issues
>   - Remove supend/resume code
> 
> Jim Quinlan (3):
>   dt-bindings: PCI: Add bindings for brcmstb's PCIe device
>   PCI: brcmstb: Add Broadcom STB PCIe host controller driver
>   PCI: brcmstb: Add MSI support
> 
> Nicolas Saenz Julienne (3):
>   ARM: dts: bcm2711: Enable PCIe controller
>   MAINTAINERS: Add brcmstb PCIe controller
>   arm64: defconfig: Enable Broadcom's STB PCIe controller
> 
>  .../bindings/pci/brcm,stb-pcie.yaml           |   97 ++
>  MAINTAINERS                                   |    4 +
>  arch/arm/boot/dts/bcm2711.dtsi                |   31 +-
>  arch/arm64/configs/defconfig                  |    1 +
>  drivers/pci/controller/Kconfig                |    9 +
>  drivers/pci/controller/Makefile               |    1 +
>  drivers/pci/controller/pcie-brcmstb.c         | 1007 +++++++++++++++++
>  7 files changed, 1149 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>  create mode 100644 drivers/pci/controller/pcie-brcmstb.c
> 
> -- 
> 2.24.0
>
Nicolas Saenz Julienne Dec. 16, 2019, 11:45 a.m. UTC | #2 
On Mon, 2019-12-16 at 11:36 +0000, Andrew Murray wrote:
> On Mon, Dec 16, 2019 at 12:01:06PM +0100, Nicolas Saenz Julienne wrote:
> > This series aims at providing support for Raspberry Pi 4's PCIe
> > controller, which is also shared with the Broadcom STB family of
> > devices.
> > 
> > There was a previous attempt to upstream this some years ago[1] but was
> > blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> > is something currently not supported by the kernel.  Luckily this is not
> > the case for the Raspberry Pi 4.
> > 
> 
> Hi Nicolas,
> 
> This series looks good to me now. Unless there is further feedback I'll ask
> Lorenzo to merge this when he returns in the new year.

Thanks!

> Thanks for the log2.h efforts - perhaps this can be picked up again one day.

I'm not giving up on it yet :)

Regards,
Nicolas
Lorenzo Pieralisi Jan. 15, 2020, 12:02 p.m. UTC | #3 
On Mon, Dec 16, 2019 at 12:01:06PM +0100, Nicolas Saenz Julienne wrote:
> This series aims at providing support for Raspberry Pi 4's PCIe
> controller, which is also shared with the Broadcom STB family of
> devices.
> 
> There was a previous attempt to upstream this some years ago[1] but was
> blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> is something currently not supported by the kernel.  Luckily this is not
> the case for the Raspberry Pi 4.
> 
> Note the series is based on top of linux next, as the DTS patch depends
> on it.
> 
> [1] https://patchwork.kernel.org/cover/10605933/
> [2] https://patchwork.kernel.org/patch/10605957/
> 
> ---
> 
> Changes since v4:
>   - Rebase DTS patch
>   - Respin log2.h code into it's own series as it's still contentious
>     yet mostly unrelated to the PCIe part
> 
> Changes since v3:
>   - Moved all the log2.h related changes at the end of the series, as I
>     presume they will be contentious and I don't want the PCIe patches
>     to depend on them. Ultimately I think I'll respin them on their own
>     series but wanted to keep them in for this submission just for the
>     sake of continuity.
>   - Addressed small nits here and there.
> 
> Changes since v2:
>   - Redo register access in driver avoiding indirection while keeping
>     the naming intact
>   - Add patch editing ARM64's config
>   - Last MSI cleanups, notably removing MSIX flag
>   - Got rid of all _RB writes
>   - Got rid of all of_data
>   - Overall churn removal
>   - Address the rest of Andrew's comments
> 
> Changes since v1:
>   - add generic rounddown/roundup_pow_two64() patch
>   - Add MAINTAINERS patch
>   - Fix Kconfig
>   - Cleanup probe, use up to date APIs, exit on MSI failure
>   - Get rid of linux,pci-domain and other unused constructs
>   - Use edge triggered setup for MSI
>   - Cleanup MSI implementation
>   - Fix multiple cosmetic issues
>   - Remove supend/resume code
> 
> Jim Quinlan (3):
>   dt-bindings: PCI: Add bindings for brcmstb's PCIe device
>   PCI: brcmstb: Add Broadcom STB PCIe host controller driver
>   PCI: brcmstb: Add MSI support
> 
> Nicolas Saenz Julienne (3):
>   ARM: dts: bcm2711: Enable PCIe controller
>   MAINTAINERS: Add brcmstb PCIe controller
>   arm64: defconfig: Enable Broadcom's STB PCIe controller
> 
>  .../bindings/pci/brcm,stb-pcie.yaml           |   97 ++
>  MAINTAINERS                                   |    4 +
>  arch/arm/boot/dts/bcm2711.dtsi                |   31 +-
>  arch/arm64/configs/defconfig                  |    1 +
>  drivers/pci/controller/Kconfig                |    9 +
>  drivers/pci/controller/Makefile               |    1 +
>  drivers/pci/controller/pcie-brcmstb.c         | 1007 +++++++++++++++++
>  7 files changed, 1149 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>  create mode 100644 drivers/pci/controller/pcie-brcmstb.c

Applied patches [1,3,4] to pci/brcmstb, please have a look to check
everything is in order after the minor update I included.

Thanks !
Lorenzo
Nicolas Saenz Julienne Jan. 15, 2020, 12:45 p.m. UTC | #4 
On Wed, 2020-01-15 at 12:02 +0000, Lorenzo Pieralisi wrote:
> On Mon, Dec 16, 2019 at 12:01:06PM +0100, Nicolas Saenz Julienne wrote:
> > This series aims at providing support for Raspberry Pi 4's PCIe
> > controller, which is also shared with the Broadcom STB family of
> > devices.
> > 
> > There was a previous attempt to upstream this some years ago[1] but was
> > blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> > is something currently not supported by the kernel.  Luckily this is not
> > the case for the Raspberry Pi 4.
> > 
> > Note the series is based on top of linux next, as the DTS patch depends
> > on it.
> > 
> > [1] https://patchwork.kernel.org/cover/10605933/
> > [2] https://patchwork.kernel.org/patch/10605957/
> > 
> > ---
> > 
> > Changes since v4:
> >   - Rebase DTS patch
> >   - Respin log2.h code into it's own series as it's still contentious
> >     yet mostly unrelated to the PCIe part
> > 
> > Changes since v3:
> >   - Moved all the log2.h related changes at the end of the series, as I
> >     presume they will be contentious and I don't want the PCIe patches
> >     to depend on them. Ultimately I think I'll respin them on their own
> >     series but wanted to keep them in for this submission just for the
> >     sake of continuity.
> >   - Addressed small nits here and there.
> > 
> > Changes since v2:
> >   - Redo register access in driver avoiding indirection while keeping
> >     the naming intact
> >   - Add patch editing ARM64's config
> >   - Last MSI cleanups, notably removing MSIX flag
> >   - Got rid of all _RB writes
> >   - Got rid of all of_data
> >   - Overall churn removal
> >   - Address the rest of Andrew's comments
> > 
> > Changes since v1:
> >   - add generic rounddown/roundup_pow_two64() patch
> >   - Add MAINTAINERS patch
> >   - Fix Kconfig
> >   - Cleanup probe, use up to date APIs, exit on MSI failure
> >   - Get rid of linux,pci-domain and other unused constructs
> >   - Use edge triggered setup for MSI
> >   - Cleanup MSI implementation
> >   - Fix multiple cosmetic issues
> >   - Remove supend/resume code
> > 
> > Jim Quinlan (3):
> >   dt-bindings: PCI: Add bindings for brcmstb's PCIe device
> >   PCI: brcmstb: Add Broadcom STB PCIe host controller driver
> >   PCI: brcmstb: Add MSI support
> > 
> > Nicolas Saenz Julienne (3):
> >   ARM: dts: bcm2711: Enable PCIe controller
> >   MAINTAINERS: Add brcmstb PCIe controller
> >   arm64: defconfig: Enable Broadcom's STB PCIe controller
> > 
> >  .../bindings/pci/brcm,stb-pcie.yaml           |   97 ++
> >  MAINTAINERS                                   |    4 +
> >  arch/arm/boot/dts/bcm2711.dtsi                |   31 +-
> >  arch/arm64/configs/defconfig                  |    1 +
> >  drivers/pci/controller/Kconfig                |    9 +
> >  drivers/pci/controller/Makefile               |    1 +
> >  drivers/pci/controller/pcie-brcmstb.c         | 1007 +++++++++++++++++
> >  7 files changed, 1149 insertions(+), 1 deletion(-)
> >  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> >  create mode 100644 drivers/pci/controller/pcie-brcmstb.c
> 
> Applied patches [1,3,4] to pci/brcmstb, please have a look to check
> everything is in order after the minor update I included.

Looks good to me.

Thanks,
Nicolas