| Message ID | 20200117135130.3605-5-sibis@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Improve general readability of MSS on SC7180 | expand |
On Fri 17 Jan 05:51 PST 2020, Sibi Sankar wrote: > Define CONN_BOX_SPARE_0_EN and fixup comments to improve readability of > Q6 modem reset_assert sequence on SC7180 SoCs. > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org> > --- > drivers/remoteproc/qcom_q6v5_mss.c | 17 ++++++++++++++--- > 1 file changed, 14 insertions(+), 3 deletions(-) > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c > index 6a98e9029c70b..8c9cfc213d5ff 100644 > --- a/drivers/remoteproc/qcom_q6v5_mss.c > +++ b/drivers/remoteproc/qcom_q6v5_mss.c > @@ -71,6 +71,7 @@ > #define NAV_AXI_HALTREQ_BIT BIT(0) > #define NAV_AXI_HALTACK_BIT BIT(1) > #define NAV_AXI_IDLE_BIT BIT(2) > +#define CONN_BOX_SPARE_0_EN BIT(0) > > #define HALT_ACK_TIMEOUT_MS 100 > #define NAV_HALT_ACK_TIMEOUT_US 200 > @@ -415,16 +416,26 @@ static int q6v5_reset_assert(struct q6v5 *qproc) > ret = reset_control_reset(qproc->mss_restart); > reset_control_deassert(qproc->pdc_reset); > } else if (qproc->has_halt_nav) { > - /* SWAR using CONN_BOX_SPARE_0 for pipeline glitch issue */ > + /* > + * SWWA for the pipeline glitch issue seen while Is SWWA an abbreviation for SoftWare WorkAround? > + * putting the Q6 modem on SC7180 into reset: > + * 1 - Assert PDC reset > + * 2 - Set CONN_BOX_SPARE_0_EN > + * 3 - Withdraw the halt requests > + * 4 - Assert MSS reset > + * 5 - Deassert PDC reset > + * 6 - Clear CONN_BOX_SPARE_0_EN > + * 7 - Deassert MSS reset This pretty much outlines what's written below. How about making this something like: /* * Work around a pipeline glitch seen when putting the Q6 modem in * SC7180 into reset by also toggling CONN_BOX_SPARE_0_EN, while holding * the PDC reset. */ Although, it would be even better if it indicated what you mean with "pipeline glitch"... Regards, Bjorn > + */ > reset_control_assert(qproc->pdc_reset); > regmap_update_bits(qproc->conn_map, qproc->conn_box, > - BIT(0), BIT(0)); > + CONN_BOX_SPARE_0_EN, 1); > regmap_update_bits(qproc->halt_nav_map, qproc->halt_nav, > NAV_AXI_HALTREQ_BIT, 0); > reset_control_assert(qproc->mss_restart); > reset_control_deassert(qproc->pdc_reset); > regmap_update_bits(qproc->conn_map, qproc->conn_box, > - BIT(0), 0); > + CONN_BOX_SPARE_0_EN, 0); > ret = reset_control_deassert(qproc->mss_restart); > } else { > ret = reset_control_assert(qproc->mss_restart); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index 6a98e9029c70b..8c9cfc213d5ff 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -71,6 +71,7 @@ #define NAV_AXI_HALTREQ_BIT BIT(0) #define NAV_AXI_HALTACK_BIT BIT(1) #define NAV_AXI_IDLE_BIT BIT(2) +#define CONN_BOX_SPARE_0_EN BIT(0) #define HALT_ACK_TIMEOUT_MS 100 #define NAV_HALT_ACK_TIMEOUT_US 200 @@ -415,16 +416,26 @@ static int q6v5_reset_assert(struct q6v5 *qproc) ret = reset_control_reset(qproc->mss_restart); reset_control_deassert(qproc->pdc_reset); } else if (qproc->has_halt_nav) { - /* SWAR using CONN_BOX_SPARE_0 for pipeline glitch issue */ + /* + * SWWA for the pipeline glitch issue seen while + * putting the Q6 modem on SC7180 into reset: + * 1 - Assert PDC reset + * 2 - Set CONN_BOX_SPARE_0_EN + * 3 - Withdraw the halt requests + * 4 - Assert MSS reset + * 5 - Deassert PDC reset + * 6 - Clear CONN_BOX_SPARE_0_EN + * 7 - Deassert MSS reset + */ reset_control_assert(qproc->pdc_reset); regmap_update_bits(qproc->conn_map, qproc->conn_box, - BIT(0), BIT(0)); + CONN_BOX_SPARE_0_EN, 1); regmap_update_bits(qproc->halt_nav_map, qproc->halt_nav, NAV_AXI_HALTREQ_BIT, 0); reset_control_assert(qproc->mss_restart); reset_control_deassert(qproc->pdc_reset); regmap_update_bits(qproc->conn_map, qproc->conn_box, - BIT(0), 0); + CONN_BOX_SPARE_0_EN, 0); ret = reset_control_deassert(qproc->mss_restart); } else { ret = reset_control_assert(qproc->mss_restart);
Define CONN_BOX_SPARE_0_EN and fixup comments to improve readability of Q6 modem reset_assert sequence on SC7180 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- drivers/remoteproc/qcom_q6v5_mss.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)