Message ID | 20200116111850.23690-7-repk@triplefau.lt (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | PCI: amlogic: Make PCIe working reliably on AXG platforms | expand |
On Thu 16 Jan 2020 at 12:18, Remi Pommarel <repk@triplefau.lt> wrote: > This adds support for the PCI PHY found in the Amlogic AXG SoC Family. > This will allow to mutualize code in pci-meson.c between AXG and G12A > SoC. > > This PHY can chain and use an optional analog PHY, which is used on > AXG platform to have reliable PCIe communication. > > Signed-off-by: Remi Pommarel <repk@triplefau.lt> > --- > drivers/phy/amlogic/Kconfig | 11 ++ > drivers/phy/amlogic/Makefile | 1 + > drivers/phy/amlogic/phy-meson-axg-pcie.c | 192 +++++++++++++++++++++++ > 3 files changed, 204 insertions(+) > create mode 100644 drivers/phy/amlogic/phy-meson-axg-pcie.c > > diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig > index 8c9cf2403591..71801e30d601 100644 > --- a/drivers/phy/amlogic/Kconfig > +++ b/drivers/phy/amlogic/Kconfig > @@ -60,6 +60,17 @@ config PHY_MESON_G12A_USB3_PCIE > in Meson G12A SoCs. > If unsure, say N. > > +config PHY_MESON_AXG_PCIE > + tristate "Meson AXG PCIE PHY driver" > + default ARCH_MESON > + depends on OF && (ARCH_MESON || COMPILE_TEST) > + select GENERIC_PHY > + select REGMAP_MMIO > + help > + Enable this to support the Meson MIPI + PCIE PHY found > + in Meson AXG SoCs. > + If unsure, say N. > + > config PHY_MESON_AXG_MIPI_PCIE_ANALOG > tristate "Meson AXG MIPI + PCIE analog PHY driver" > default ARCH_MESON > diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile > index 0aecf92d796a..e2baa133f7af 100644 > --- a/drivers/phy/amlogic/Makefile > +++ b/drivers/phy/amlogic/Makefile > @@ -4,4 +4,5 @@ obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o > obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o > obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o > obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o > +obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o > obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o > diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c > new file mode 100644 > index 000000000000..0c5d0732cd1c > --- /dev/null > +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c > @@ -0,0 +1,192 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Amlogic AXG PCIE PHY driver > + * > + * Copyright (C) 2020 Remi Pommarel <repk@triplefau.lt> > + */ > +#include <linux/module.h> > +#include <linux/phy/phy.h> > +#include <linux/regmap.h> > +#include <linux/reset.h> > +#include <linux/platform_device.h> > +#include <linux/bitfield.h> > +#include <dt-bindings/phy/phy.h> > + > +#define MESON_PCIE_REG0 0x00 > +#define MESON_PCIE_COMMON_CLK BIT(4) > +#define MESON_PCIE_PORT_SEL GENMASK(3, 2) > +#define MESON_PCIE_CLK BIT(1) > +#define MESON_PCIE_POWERDOWN BIT(0) > + > +#define MESON_PCIE_TWO_X1 FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3) > +#define MESON_PCIE_COMMON_REF_CLK FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1) > +#define MESON_PCIE_PHY_INIT (MESON_PCIE_TWO_X1 | \ > + MESON_PCIE_COMMON_REF_CLK) > +#define MESON_PCIE_RESET_DELAY 500 > + > +struct phy_axg_pcie_priv { > + struct phy *phy; > + struct phy *analog; > + struct regmap *regmap; > + struct reset_control *reset; > +}; > + > +static const struct regmap_config phy_axg_pcie_regmap_conf = { > + .reg_bits = 8, > + .val_bits = 32, > + .reg_stride = 4, > + .max_register = MESON_PCIE_REG0, > +}; > + > +static int phy_axg_pcie_power_on(struct phy *phy) > +{ > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > + int ret; > + > + ret = phy_power_on(priv->analog); > + if (ret != 0) > + return ret; > + > + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, > + MESON_PCIE_POWERDOWN, 0); > + return 0; > +} > + > +static int phy_axg_pcie_power_off(struct phy *phy) > +{ > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > + int ret; > + > + ret = phy_power_off(priv->analog); > + if (ret != 0) > + return ret; > + > + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, > + MESON_PCIE_POWERDOWN, 1); > + return 0; > +} > + > +static int phy_axg_pcie_init(struct phy *phy) > +{ > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > + int ret; > + > + ret = phy_init(priv->analog); > + if (ret != 0) > + return ret; > + > + regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT); > + return reset_control_reset(priv->reset); > +} > + > +static int phy_axg_pcie_exit(struct phy *phy) > +{ > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > + int ret; > + > + ret = phy_exit(priv->analog); > + if (ret != 0) > + return ret; > + > + return reset_control_reset(priv->reset); > +} > + > +static int phy_axg_pcie_reset(struct phy *phy) > +{ > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > + int ret = 0; > + > + ret = phy_reset(priv->analog); > + if (ret != 0) > + goto out; > + > + ret = reset_control_assert(priv->reset); > + if (ret != 0) > + goto out; > + udelay(MESON_PCIE_RESET_DELAY); > + > + ret = reset_control_deassert(priv->reset); > + if (ret != 0) > + goto out; > + udelay(MESON_PCIE_RESET_DELAY); > + > +out: > + return ret; > +} > + > +static const struct phy_ops phy_axg_pcie_ops = { > + .init = phy_axg_pcie_init, > + .exit = phy_axg_pcie_exit, > + .power_on = phy_axg_pcie_power_on, > + .power_off = phy_axg_pcie_power_off, > + .reset = phy_axg_pcie_reset, > + .owner = THIS_MODULE, > +}; > + > +static int phy_axg_pcie_probe(struct platform_device *pdev) > +{ > + struct phy_provider *pphy; > + struct device *dev = &pdev->dev; > + struct phy_axg_pcie_priv *priv; > + struct device_node *np = dev->of_node; > + struct resource *res; > + void __iomem *base; > + int ret; > + > + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops); > + if (IS_ERR(priv->phy)) { > + ret = PTR_ERR(priv->phy); > + if (ret != -EPROBE_DEFER) > + dev_err(dev, "failed to create PHY\n"); > + return ret; > + } > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + base = devm_ioremap_resource(dev, res); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + priv->regmap = devm_regmap_init_mmio(dev, base, > + &phy_axg_pcie_regmap_conf); > + if (IS_ERR(priv->regmap)) > + return PTR_ERR(priv->regmap); > + > + priv->reset = devm_reset_control_array_get(dev, false, false); > + if (IS_ERR(priv->reset)) > + return PTR_ERR(priv->reset); > + > + priv->analog = devm_phy_optional_get(dev, "analog"); > + if (IS_ERR(priv->analog)) > + return PTR_ERR(priv->analog); Isn't required for on the axg platform for the pcie to work reliably ? Does this driver support another SoC ? > + > + phy_set_drvdata(priv->phy, priv); > + dev_set_drvdata(dev, priv); > + pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + > + return PTR_ERR_OR_ZERO(pphy); > +} > + > +static const struct of_device_id phy_axg_pcie_of_match[] = { > + { > + .compatible = "amlogic,axg-pcie-phy", > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match); > + > +static struct platform_driver phy_axg_pcie_driver = { > + .probe = phy_axg_pcie_probe, > + .driver = { > + .name = "phy-axg-pcie", > + .of_match_table = phy_axg_pcie_of_match, > + }, > +}; > +module_platform_driver(phy_axg_pcie_driver); > + > +MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>"); > +MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver"); > +MODULE_LICENSE("GPL v2");
On Thu, Jan 23, 2020 at 10:44:43AM +0100, Jerome Brunet wrote: > > On Thu 16 Jan 2020 at 12:18, Remi Pommarel <repk@triplefau.lt> wrote: > > > This adds support for the PCI PHY found in the Amlogic AXG SoC Family. > > This will allow to mutualize code in pci-meson.c between AXG and G12A > > SoC. > > > > This PHY can chain and use an optional analog PHY, which is used on > > AXG platform to have reliable PCIe communication. > > > > Signed-off-by: Remi Pommarel <repk@triplefau.lt> > > --- > > drivers/phy/amlogic/Kconfig | 11 ++ > > drivers/phy/amlogic/Makefile | 1 + > > drivers/phy/amlogic/phy-meson-axg-pcie.c | 192 +++++++++++++++++++++++ > > 3 files changed, 204 insertions(+) > > create mode 100644 drivers/phy/amlogic/phy-meson-axg-pcie.c > > > > diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig > > index 8c9cf2403591..71801e30d601 100644 > > --- a/drivers/phy/amlogic/Kconfig > > +++ b/drivers/phy/amlogic/Kconfig > > @@ -60,6 +60,17 @@ config PHY_MESON_G12A_USB3_PCIE > > in Meson G12A SoCs. > > If unsure, say N. > > > > +config PHY_MESON_AXG_PCIE > > + tristate "Meson AXG PCIE PHY driver" > > + default ARCH_MESON > > + depends on OF && (ARCH_MESON || COMPILE_TEST) > > + select GENERIC_PHY > > + select REGMAP_MMIO > > + help > > + Enable this to support the Meson MIPI + PCIE PHY found > > + in Meson AXG SoCs. > > + If unsure, say N. > > + > > config PHY_MESON_AXG_MIPI_PCIE_ANALOG > > tristate "Meson AXG MIPI + PCIE analog PHY driver" > > default ARCH_MESON > > diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile > > index 0aecf92d796a..e2baa133f7af 100644 > > --- a/drivers/phy/amlogic/Makefile > > +++ b/drivers/phy/amlogic/Makefile > > @@ -4,4 +4,5 @@ obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o > > obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o > > obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o > > obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o > > +obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o > > obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o > > diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c > > new file mode 100644 > > index 000000000000..0c5d0732cd1c > > --- /dev/null > > +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c > > @@ -0,0 +1,192 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Amlogic AXG PCIE PHY driver > > + * > > + * Copyright (C) 2020 Remi Pommarel <repk@triplefau.lt> > > + */ > > +#include <linux/module.h> > > +#include <linux/phy/phy.h> > > +#include <linux/regmap.h> > > +#include <linux/reset.h> > > +#include <linux/platform_device.h> > > +#include <linux/bitfield.h> > > +#include <dt-bindings/phy/phy.h> > > + > > +#define MESON_PCIE_REG0 0x00 > > +#define MESON_PCIE_COMMON_CLK BIT(4) > > +#define MESON_PCIE_PORT_SEL GENMASK(3, 2) > > +#define MESON_PCIE_CLK BIT(1) > > +#define MESON_PCIE_POWERDOWN BIT(0) > > + > > +#define MESON_PCIE_TWO_X1 FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3) > > +#define MESON_PCIE_COMMON_REF_CLK FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1) > > +#define MESON_PCIE_PHY_INIT (MESON_PCIE_TWO_X1 | \ > > + MESON_PCIE_COMMON_REF_CLK) > > +#define MESON_PCIE_RESET_DELAY 500 > > + > > +struct phy_axg_pcie_priv { > > + struct phy *phy; > > + struct phy *analog; > > + struct regmap *regmap; > > + struct reset_control *reset; > > +}; > > + > > +static const struct regmap_config phy_axg_pcie_regmap_conf = { > > + .reg_bits = 8, > > + .val_bits = 32, > > + .reg_stride = 4, > > + .max_register = MESON_PCIE_REG0, > > +}; > > + > > +static int phy_axg_pcie_power_on(struct phy *phy) > > +{ > > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > > + int ret; > > + > > + ret = phy_power_on(priv->analog); > > + if (ret != 0) > > + return ret; > > + > > + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, > > + MESON_PCIE_POWERDOWN, 0); > > + return 0; > > +} > > + > > +static int phy_axg_pcie_power_off(struct phy *phy) > > +{ > > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > > + int ret; > > + > > + ret = phy_power_off(priv->analog); > > + if (ret != 0) > > + return ret; > > + > > + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, > > + MESON_PCIE_POWERDOWN, 1); > > + return 0; > > +} > > + > > +static int phy_axg_pcie_init(struct phy *phy) > > +{ > > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > > + int ret; > > + > > + ret = phy_init(priv->analog); > > + if (ret != 0) > > + return ret; > > + > > + regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT); > > + return reset_control_reset(priv->reset); > > +} > > + > > +static int phy_axg_pcie_exit(struct phy *phy) > > +{ > > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > > + int ret; > > + > > + ret = phy_exit(priv->analog); > > + if (ret != 0) > > + return ret; > > + > > + return reset_control_reset(priv->reset); > > +} > > + > > +static int phy_axg_pcie_reset(struct phy *phy) > > +{ > > + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); > > + int ret = 0; > > + > > + ret = phy_reset(priv->analog); > > + if (ret != 0) > > + goto out; > > + > > + ret = reset_control_assert(priv->reset); > > + if (ret != 0) > > + goto out; > > + udelay(MESON_PCIE_RESET_DELAY); > > + > > + ret = reset_control_deassert(priv->reset); > > + if (ret != 0) > > + goto out; > > + udelay(MESON_PCIE_RESET_DELAY); > > + > > +out: > > + return ret; > > +} > > + > > +static const struct phy_ops phy_axg_pcie_ops = { > > + .init = phy_axg_pcie_init, > > + .exit = phy_axg_pcie_exit, > > + .power_on = phy_axg_pcie_power_on, > > + .power_off = phy_axg_pcie_power_off, > > + .reset = phy_axg_pcie_reset, > > + .owner = THIS_MODULE, > > +}; > > + > > +static int phy_axg_pcie_probe(struct platform_device *pdev) > > +{ > > + struct phy_provider *pphy; > > + struct device *dev = &pdev->dev; > > + struct phy_axg_pcie_priv *priv; > > + struct device_node *np = dev->of_node; > > + struct resource *res; > > + void __iomem *base; > > + int ret; > > + > > + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops); > > + if (IS_ERR(priv->phy)) { > > + ret = PTR_ERR(priv->phy); > > + if (ret != -EPROBE_DEFER) > > + dev_err(dev, "failed to create PHY\n"); > > + return ret; > > + } > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + base = devm_ioremap_resource(dev, res); > > + if (IS_ERR(base)) > > + return PTR_ERR(base); > > + > > + priv->regmap = devm_regmap_init_mmio(dev, base, > > + &phy_axg_pcie_regmap_conf); > > + if (IS_ERR(priv->regmap)) > > + return PTR_ERR(priv->regmap); > > + > > + priv->reset = devm_reset_control_array_get(dev, false, false); > > + if (IS_ERR(priv->reset)) > > + return PTR_ERR(priv->reset); > > + > > + priv->analog = devm_phy_optional_get(dev, "analog"); > > + if (IS_ERR(priv->analog)) > > + return PTR_ERR(priv->analog); > > Isn't required for on the axg platform for the pcie to work reliably ? > Does this driver support another SoC ? > That is just me being overly cautious here. It is indeed required on AXG SoC to have pcie working reliably. Will change that in next patchset version. Thanks. > > + > > + phy_set_drvdata(priv->phy, priv); > > + dev_set_drvdata(dev, priv); > > + pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > > + > > + return PTR_ERR_OR_ZERO(pphy); > > +} > > + > > +static const struct of_device_id phy_axg_pcie_of_match[] = { > > + { > > + .compatible = "amlogic,axg-pcie-phy", > > + }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match); > > + > > +static struct platform_driver phy_axg_pcie_driver = { > > + .probe = phy_axg_pcie_probe, > > + .driver = { > > + .name = "phy-axg-pcie", > > + .of_match_table = phy_axg_pcie_of_match, > > + }, > > +}; > > +module_platform_driver(phy_axg_pcie_driver); > > + > > +MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>"); > > +MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver"); > > +MODULE_LICENSE("GPL v2"); >
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 8c9cf2403591..71801e30d601 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -60,6 +60,17 @@ config PHY_MESON_G12A_USB3_PCIE in Meson G12A SoCs. If unsure, say N. +config PHY_MESON_AXG_PCIE + tristate "Meson AXG PCIE PHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson MIPI + PCIE PHY found + in Meson AXG SoCs. + If unsure, say N. + config PHY_MESON_AXG_MIPI_PCIE_ANALOG tristate "Meson AXG MIPI + PCIE analog PHY driver" default ARCH_MESON diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index 0aecf92d796a..e2baa133f7af 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o +obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c new file mode 100644 index 000000000000..0c5d0732cd1c --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Amlogic AXG PCIE PHY driver + * + * Copyright (C) 2020 Remi Pommarel <repk@triplefau.lt> + */ +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/platform_device.h> +#include <linux/bitfield.h> +#include <dt-bindings/phy/phy.h> + +#define MESON_PCIE_REG0 0x00 +#define MESON_PCIE_COMMON_CLK BIT(4) +#define MESON_PCIE_PORT_SEL GENMASK(3, 2) +#define MESON_PCIE_CLK BIT(1) +#define MESON_PCIE_POWERDOWN BIT(0) + +#define MESON_PCIE_TWO_X1 FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3) +#define MESON_PCIE_COMMON_REF_CLK FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1) +#define MESON_PCIE_PHY_INIT (MESON_PCIE_TWO_X1 | \ + MESON_PCIE_COMMON_REF_CLK) +#define MESON_PCIE_RESET_DELAY 500 + +struct phy_axg_pcie_priv { + struct phy *phy; + struct phy *analog; + struct regmap *regmap; + struct reset_control *reset; +}; + +static const struct regmap_config phy_axg_pcie_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = MESON_PCIE_REG0, +}; + +static int phy_axg_pcie_power_on(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_power_on(priv->analog); + if (ret != 0) + return ret; + + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, + MESON_PCIE_POWERDOWN, 0); + return 0; +} + +static int phy_axg_pcie_power_off(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_power_off(priv->analog); + if (ret != 0) + return ret; + + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, + MESON_PCIE_POWERDOWN, 1); + return 0; +} + +static int phy_axg_pcie_init(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_init(priv->analog); + if (ret != 0) + return ret; + + regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT); + return reset_control_reset(priv->reset); +} + +static int phy_axg_pcie_exit(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_exit(priv->analog); + if (ret != 0) + return ret; + + return reset_control_reset(priv->reset); +} + +static int phy_axg_pcie_reset(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + ret = phy_reset(priv->analog); + if (ret != 0) + goto out; + + ret = reset_control_assert(priv->reset); + if (ret != 0) + goto out; + udelay(MESON_PCIE_RESET_DELAY); + + ret = reset_control_deassert(priv->reset); + if (ret != 0) + goto out; + udelay(MESON_PCIE_RESET_DELAY); + +out: + return ret; +} + +static const struct phy_ops phy_axg_pcie_ops = { + .init = phy_axg_pcie_init, + .exit = phy_axg_pcie_exit, + .power_on = phy_axg_pcie_power_on, + .power_off = phy_axg_pcie_power_off, + .reset = phy_axg_pcie_reset, + .owner = THIS_MODULE, +}; + +static int phy_axg_pcie_probe(struct platform_device *pdev) +{ + struct phy_provider *pphy; + struct device *dev = &pdev->dev; + struct phy_axg_pcie_priv *priv; + struct device_node *np = dev->of_node; + struct resource *res; + void __iomem *base; + int ret; + + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops); + if (IS_ERR(priv->phy)) { + ret = PTR_ERR(priv->phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_axg_pcie_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->reset = devm_reset_control_array_get(dev, false, false); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + priv->analog = devm_phy_optional_get(dev, "analog"); + if (IS_ERR(priv->analog)) + return PTR_ERR(priv->analog); + + phy_set_drvdata(priv->phy, priv); + dev_set_drvdata(dev, priv); + pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(pphy); +} + +static const struct of_device_id phy_axg_pcie_of_match[] = { + { + .compatible = "amlogic,axg-pcie-phy", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match); + +static struct platform_driver phy_axg_pcie_driver = { + .probe = phy_axg_pcie_probe, + .driver = { + .name = "phy-axg-pcie", + .of_match_table = phy_axg_pcie_of_match, + }, +}; +module_platform_driver(phy_axg_pcie_driver); + +MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>"); +MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver"); +MODULE_LICENSE("GPL v2");
This adds support for the PCI PHY found in the Amlogic AXG SoC Family. This will allow to mutualize code in pci-meson.c between AXG and G12A SoC. This PHY can chain and use an optional analog PHY, which is used on AXG platform to have reliable PCIe communication. Signed-off-by: Remi Pommarel <repk@triplefau.lt> --- drivers/phy/amlogic/Kconfig | 11 ++ drivers/phy/amlogic/Makefile | 1 + drivers/phy/amlogic/phy-meson-axg-pcie.c | 192 +++++++++++++++++++++++ 3 files changed, 204 insertions(+) create mode 100644 drivers/phy/amlogic/phy-meson-axg-pcie.c