| Message ID | 1579439601-14810-2-git-send-email-sricharan@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add minimal boot support for IPQ6018 | expand |
On Sun, 19 Jan 2020 18:43:17 +0530, Sricharan R wrote: > Add device tree binding Documentation details for ipq6018 > pinctrl driver. > > Co-developed-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> > Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> > Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> > Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> > --- > [V6] > * Addressed review comments form Rob. > .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ > 1 file changed, 153 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
Hi, On 1/27/2020 9:11 PM, Rob Herring wrote: > On Sun, 19 Jan 2020 18:43:17 +0530, Sricharan R wrote: >> Add device tree binding Documentation details for ipq6018 >> pinctrl driver. >> >> Co-developed-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> >> Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> >> Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> >> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> >> Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >> --- >> [V6] >> * Addressed review comments form Rob. >> .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ >> 1 file changed, 153 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml >> > > Reviewed-by: Rob Herring <robh@kernel.org> Thanks Rob. Hi Linus, The pinctrl driver can now be pulled in. Regards, Sricharan
Hi Rob, On 1/28/2020 10:07 AM, Sricharan R wrote: > Hi, > > On 1/27/2020 9:11 PM, Rob Herring wrote: >> On Sun, 19 Jan 2020 18:43:17 +0530, Sricharan R wrote: >>> Add device tree binding Documentation details for ipq6018 >>> pinctrl driver. >>> >>> Co-developed-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> >>> Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> >>> Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> >>> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> >>> Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >>> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >>> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >>> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >>> --- >>> [V6] >>> * Addressed review comments form Rob. >>> .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ >>> 1 file changed, 153 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml >>> >> >> Reviewed-by: Rob Herring <robh@kernel.org> > Thanks Rob. > > Hi Linus, > The pinctrl driver can now be pulled in. Any chance this can be taken for 5.6 ? Regards, Sricharan
Hi Linus, On 2/4/2020 7:34 PM, Sricharan R wrote: > Hi Rob, > > On 1/28/2020 10:07 AM, Sricharan R wrote: >> Hi, >> >> On 1/27/2020 9:11 PM, Rob Herring wrote: >>> On Sun, 19 Jan 2020 18:43:17 +0530, Sricharan R wrote: >>>> Add device tree binding Documentation details for ipq6018 >>>> pinctrl driver. >>>> >>>> Co-developed-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> >>>> Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> >>>> Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> >>>> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> >>>> Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >>>> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >>>> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >>>> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> >>>> --- >>>> [V6] >>>> * Addressed review comments form Rob. >>>> .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ >>>> 1 file changed, 153 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml >>>> >>> >>> Reviewed-by: Rob Herring <robh@kernel.org> >> Thanks Rob. >> >> Hi Linus, >> The pinctrl driver can now be pulled in. > > Any chance this can be taken for 5.6 ? > Can the pinctrl driver be taken for 5.6 by any chance ? Regards, Sricharan
On Sun, Jan 19, 2020 at 2:13 PM Sricharan R <sricharan@codeaurora.org> wrote: > Add device tree binding Documentation details for ipq6018 > pinctrl driver. > > Co-developed-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> > Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> > Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> > Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> > --- > [V6] Patch applied for v5.7 with Rob's Review tag. Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file mode 100644 index 0000000..63d1cfe --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block + +maintainers: + - Sricharan R <sricharan@codeaurora.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ6018 platform. + +properties: + compatible: + const: qcom,ipq6018-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pinmux$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + allOf: + - $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] + minItems: 1 + maxItems: 4 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, + blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, + blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, + blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + + serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };