| Message ID | 20200127231208.1443-1-s-anna@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] mfd: syscon: Use a unique name with regmap_config | expand |
On 1/27/20 5:12 PM, Suman Anna wrote: > The DT node full name is currently being used in regmap_config > which in turn is used to create the regmap debugfs directories. > This name however is not guaranteed to be unique and the regmap > debugfs registration can fail in the cases where the syscon nodes > have the same unit-address but are present in different DT node > hierarchies. Replace this logic using the syscon reg resource > address instead (inspired from logic used while creating platform > devices) to ensure a unique name is given for each syscon. > > Signed-off-by: Suman Anna <s-anna@ti.com> > --- > v2: Fix build warning reported by kbuild test bot > v1: https://patchwork.kernel.org/patch/11346363/ > > drivers/mfd/syscon.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c > index e22197c832e8..f0815d8e6e95 100644 > --- a/drivers/mfd/syscon.c > +++ b/drivers/mfd/syscon.c > @@ -101,12 +101,14 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk) > } > } > > - syscon_config.name = of_node_full_name(np); > + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, > + (u64)res.start); Would it make sense to also include the node name along with the pointer address so that the name is still easily identifiable? > syscon_config.reg_stride = reg_io_width; > syscon_config.val_bits = reg_io_width * 8; > syscon_config.max_register = resource_size(&res) - reg_io_width; > > regmap = regmap_init_mmio(NULL, base, &syscon_config); > + kfree(syscon_config.name); > if (IS_ERR(regmap)) { > pr_err("regmap init failed\n"); > ret = PTR_ERR(regmap); >
Hi David, On 1/27/20 5:40 PM, David Lechner wrote: > On 1/27/20 5:12 PM, Suman Anna wrote: >> The DT node full name is currently being used in regmap_config >> which in turn is used to create the regmap debugfs directories. >> This name however is not guaranteed to be unique and the regmap >> debugfs registration can fail in the cases where the syscon nodes >> have the same unit-address but are present in different DT node >> hierarchies. Replace this logic using the syscon reg resource >> address instead (inspired from logic used while creating platform >> devices) to ensure a unique name is given for each syscon. >> >> Signed-off-by: Suman Anna <s-anna@ti.com> >> --- >> v2: Fix build warning reported by kbuild test bot >> v1: https://patchwork.kernel.org/patch/11346363/ >> >> drivers/mfd/syscon.c | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c >> index e22197c832e8..f0815d8e6e95 100644 >> --- a/drivers/mfd/syscon.c >> +++ b/drivers/mfd/syscon.c >> @@ -101,12 +101,14 @@ static struct syscon *of_syscon_register(struct >> device_node *np, bool check_clk) >> } >> } >> - syscon_config.name = of_node_full_name(np); >> + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, >> + (u64)res.start); > > Would it make sense to also include the node name along with the > pointer address so that the name is still easily identifiable? I haven't dropped the node name, it is still there, the pOFn part. I am only replacing the DT unit-address with the bus address, I haven't changed the name style either. regards Suman > >> syscon_config.reg_stride = reg_io_width; >> syscon_config.val_bits = reg_io_width * 8; >> syscon_config.max_register = resource_size(&res) - reg_io_width; >> regmap = regmap_init_mmio(NULL, base, &syscon_config); >> + kfree(syscon_config.name); >> if (IS_ERR(regmap)) { >> pr_err("regmap init failed\n"); >> ret = PTR_ERR(regmap); >> >
On Tue, Jan 28, 2020 at 1:14 AM Suman Anna <s-anna@ti.com> wrote: > > The DT node full name is currently being used in regmap_config > which in turn is used to create the regmap debugfs directories. > This name however is not guaranteed to be unique and the regmap > debugfs registration can fail in the cases where the syscon nodes > have the same unit-address but are present in different DT node > hierarchies. Replace this logic using the syscon reg resource > address instead (inspired from logic used while creating platform > devices) to ensure a unique name is given for each syscon. > - syscon_config.name = of_node_full_name(np); > + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, > + (u64)res.start); Explicit castings in printf() usually tell us that something is not okay. Yes, for resource_size_t we have %pa. On top of that, I would rather see %pfwn to avoid modification for other fwnode types.
Hi Andy, On 1/30/20 9:34 AM, Andy Shevchenko wrote: > On Tue, Jan 28, 2020 at 1:14 AM Suman Anna <s-anna@ti.com> wrote: >> >> The DT node full name is currently being used in regmap_config >> which in turn is used to create the regmap debugfs directories. >> This name however is not guaranteed to be unique and the regmap >> debugfs registration can fail in the cases where the syscon nodes >> have the same unit-address but are present in different DT node >> hierarchies. Replace this logic using the syscon reg resource >> address instead (inspired from logic used while creating platform >> devices) to ensure a unique name is given for each syscon. > >> - syscon_config.name = of_node_full_name(np); >> + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, >> + (u64)res.start); > > Explicit castings in printf() usually tell us that something is not okay. Yes, I agree in general. > Yes, for resource_size_t we have %pa. And that was the first thing I tried when doing v2, before moving away from it. This is not for a console printf statement, but is rather for the regmap debugfs name. Using a %pa adds the 0x and leading zeros in the debugfs name, when compared to the name before this patch. The typecast retains the current format, and replaces the unit-address without the leading 0s either. Introducing a local-variable to avoid the typecast is overkill. > > On top of that, I would rather see %pfwn to avoid modification for > other fwnode types. Did you mean %pfwP? That can probably be handled when syscon code is updated to use fwnode API. regards Suman
On Thu, Jan 30, 2020 at 7:09 PM Suman Anna <s-anna@ti.com> wrote: > On 1/30/20 9:34 AM, Andy Shevchenko wrote: > > On Tue, Jan 28, 2020 at 1:14 AM Suman Anna <s-anna@ti.com> wrote: ... > >> - syscon_config.name = of_node_full_name(np); > >> + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, > >> + (u64)res.start); > > > > Explicit castings in printf() usually tell us that something is not okay. > > Yes, I agree in general. > > > Yes, for resource_size_t we have %pa. > > And that was the first thing I tried when doing v2, before moving away > from it. This is not for a console printf statement, but is rather for > the regmap debugfs name. Using a %pa adds the 0x and leading zeros in > the debugfs name, when compared to the name before this patch. The > typecast retains the current format, and replaces the unit-address > without the leading 0s either. Introducing a local-variable to avoid the > typecast is overkill. Thanks for the clarification.
On Mon, 27 Jan 2020, Suman Anna wrote: > The DT node full name is currently being used in regmap_config > which in turn is used to create the regmap debugfs directories. > This name however is not guaranteed to be unique and the regmap > debugfs registration can fail in the cases where the syscon nodes > have the same unit-address but are present in different DT node > hierarchies. Replace this logic using the syscon reg resource > address instead (inspired from logic used while creating platform > devices) to ensure a unique name is given for each syscon. > > Signed-off-by: Suman Anna <s-anna@ti.com> > --- > v2: Fix build warning reported by kbuild test bot > v1: https://patchwork.kernel.org/patch/11346363/ > > drivers/mfd/syscon.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) Waiting for Arnd to review.
On 2/24/20 4:00 AM, Lee Jones wrote: > On Mon, 27 Jan 2020, Suman Anna wrote: > >> The DT node full name is currently being used in regmap_config >> which in turn is used to create the regmap debugfs directories. >> This name however is not guaranteed to be unique and the regmap >> debugfs registration can fail in the cases where the syscon nodes >> have the same unit-address but are present in different DT node >> hierarchies. Replace this logic using the syscon reg resource >> address instead (inspired from logic used while creating platform >> devices) to ensure a unique name is given for each syscon. >> >> Signed-off-by: Suman Anna <s-anna@ti.com> >> --- >> v2: Fix build warning reported by kbuild test bot >> v1: https://patchwork.kernel.org/patch/11346363/ >> >> drivers/mfd/syscon.c | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) > > Waiting for Arnd to review. > Hi Arnd, Gentle ping, any comments? regards Suman
On Mon, 24 Feb 2020, Lee Jones wrote: > On Mon, 27 Jan 2020, Suman Anna wrote: > > > The DT node full name is currently being used in regmap_config > > which in turn is used to create the regmap debugfs directories. > > This name however is not guaranteed to be unique and the regmap > > debugfs registration can fail in the cases where the syscon nodes > > have the same unit-address but are present in different DT node > > hierarchies. Replace this logic using the syscon reg resource > > address instead (inspired from logic used while creating platform > > devices) to ensure a unique name is given for each syscon. > > > > Signed-off-by: Suman Anna <s-anna@ti.com> > > --- > > v2: Fix build warning reported by kbuild test bot > > v1: https://patchwork.kernel.org/patch/11346363/ > > > > drivers/mfd/syscon.c | 4 +++- > > 1 file changed, 3 insertions(+), 1 deletion(-) > > Waiting for Arnd to review. Still waiting for some input from Arnd. Might be worth submitting a [RESEND].
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index e22197c832e8..f0815d8e6e95 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -101,12 +101,14 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk) } } - syscon_config.name = of_node_full_name(np); + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, + (u64)res.start); syscon_config.reg_stride = reg_io_width; syscon_config.val_bits = reg_io_width * 8; syscon_config.max_register = resource_size(&res) - reg_io_width; regmap = regmap_init_mmio(NULL, base, &syscon_config); + kfree(syscon_config.name); if (IS_ERR(regmap)) { pr_err("regmap init failed\n"); ret = PTR_ERR(regmap);
The DT node full name is currently being used in regmap_config which in turn is used to create the regmap debugfs directories. This name however is not guaranteed to be unique and the regmap debugfs registration can fail in the cases where the syscon nodes have the same unit-address but are present in different DT node hierarchies. Replace this logic using the syscon reg resource address instead (inspired from logic used while creating platform devices) to ensure a unique name is given for each syscon. Signed-off-by: Suman Anna <s-anna@ti.com> --- v2: Fix build warning reported by kbuild test bot v1: https://patchwork.kernel.org/patch/11346363/ drivers/mfd/syscon.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)