| Message ID | 20200127200350.24465-9-sibis@codeaurora.org (mailing list archive) |
|---|---|
| State | RFC, archived |
| Headers | show |
| Series | DDR/L3 Scaling support on SDM845 and SC7180 SoCs | expand |
Hi Sibi, On 1/27/20 8:03 PM, Sibi Sankar wrote: > Add support to parse and update OPP tables attached to the cpu device > when the required OPP bandwidth values are populated to enable scaling > of DDR/L3 bandwidth levels with frequency change. > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org> > --- > drivers/cpufreq/qcom-cpufreq-hw.c | 246 +++++++++++++++++++++++++++--- > 1 file changed, 225 insertions(+), 21 deletions(-) > > diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c > index fc92a8842e252..348eb2fdaccaf 100644 > --- a/drivers/cpufreq/qcom-cpufreq-hw.c > +++ b/drivers/cpufreq/qcom-cpufreq-hw.c > @@ -6,6 +6,7 @@ > #include <linux/bitfield.h> > #include <linux/cpufreq.h> > #include <linux/init.h> > +#include <linux/interconnect.h> > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/of_address.h> > @@ -28,17 +29,194 @@ > #define REG_VOLT_LUT 0x114 > #define REG_PERF_STATE 0x920 > > +#define QCOM_ICC_TAG_ACTIVE_ONLY 1 > + > static unsigned long cpu_hw_rate, xo_rate; > static struct platform_device *global_pdev; > > +/* opp table indices */ > +enum { > + QCOM_CPU_OPP_TABLE_INDEX, > + QCOM_CPU_DDR_OPP_TABLE_INDEX, > + QCOM_CPU_L3_OPP_TABLE_INDEX, > +}; > + > +/* icc path indices */ > +enum { > + ICC_DDR_PATH, > + ICC_L3_PATH, > +}; > + > +struct qcom_cpufreq_hw_res { > + void __iomem *base; > + > + struct device *cpu_dev; > + > + /* ddr/l3 icc paths */ > + struct icc_path *path[2]; > + > + /* cpu/ddr/l3 opp tables */ > + struct opp_table *opp_table[3]; > +}; > + > +struct cpufreq_hw_icc_info { > + const char *icc_path_name; > + u8 table_index; > + u32 tag; > +}; > + > +static const struct cpufreq_hw_icc_info icc_info[] = { > + { > + .icc_path_name = "cpu-ddr", > + .table_index = QCOM_CPU_DDR_OPP_TABLE_INDEX, > + .tag = QCOM_ICC_TAG_ACTIVE_ONLY, > + }, > + { > + .icc_path_name = "cpu-l3", > + .table_index = QCOM_CPU_L3_OPP_TABLE_INDEX, > + .tag = 0, > + }, > +}; > + > +static int qcom_cpufreq_hw_add_opp_table(struct qcom_cpufreq_hw_res *res) > +{ > + struct opp_table **table = res->opp_table; > + struct device_node *opp_table_np, *np; > + struct device *dev = res->cpu_dev; > + int ret, i; > + u64 rate; > + > + for (i = 0; i <= QCOM_CPU_L3_OPP_TABLE_INDEX; i++) { > + ret = dev_pm_opp_of_add_table_indexed(dev, i); > + if (ret) { > + dev_dbg(dev, "Add OPP table failed index %d: %d\n", > + i, ret); > + goto err; > + } > + > + table[i] = dev_pm_opp_get_opp_table_indexed(dev, i); > + if (!table[i]) { > + dev_dbg(dev, "Get OPP table failed index %d\n", i); > + ret = -EINVAL; > + goto err; > + } > + } > + > + /* Disable all cpu opps and cross-validate against LUT */ > + opp_table_np = dev_pm_opp_of_get_opp_desc_node(dev); > + for_each_available_child_of_node(opp_table_np, np) { > + ret = of_property_read_u64(np, "opp-hz", &rate); > + if (ret) > + continue; > + > + dev_pm_opp_disable(dev, rate); > + } > + of_node_put(opp_table_np); > + > + return 0; > + > +err: > + for (; i >= 0; i--) { > + if (table[i]) { > + dev_pm_opp_put_opp_table(table[i]); > + table[i] = NULL; > + } > + } > + > + dev_pm_opp_remove_table(dev); > + return ret; > +} > + > +static int qcom_cpufreq_hw_icc_init(struct qcom_cpufreq_hw_res *res, u8 index) > +{ > + const struct cpufreq_hw_icc_info *info = &icc_info[index]; > + struct icc_path **path = res->path; > + struct device *dev = res->cpu_dev; > + > + path[index] = of_icc_get(dev, info->icc_path_name); > + if (IS_ERR(path[index])) { > + dev_dbg(dev, "ICC %s path get failed ret: %ld\n", > + info->icc_path_name, PTR_ERR(path[index])); > + return PTR_ERR(path[index]); > + } > + > + icc_set_tag(path[index], info->tag); > + > + return 0; > +} > + > +static void qcom_cpufreq_hw_icc_set(struct qcom_cpufreq_hw_res *res, > + unsigned long freq) > +{ > + struct opp_table **table = res->opp_table; > + const struct cpufreq_hw_icc_info *info; > + unsigned long freq_hz = freq * 1000; > + struct icc_path **path = res->path; > + struct device *dev = res->cpu_dev; > + struct dev_pm_opp *cpu_opp, *opp; > + struct opp_table *cpu_opp_table; > + unsigned long peak_bw, avg_bw; > + int ret; > + int i; > + > + cpu_opp_table = table[QCOM_CPU_OPP_TABLE_INDEX]; > + if (!cpu_opp_table) > + return; > + > + cpu_opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); > + if (IS_ERR_OR_NULL(cpu_opp)) > + return; > + > + for (i = 0; i <= ICC_L3_PATH; i++) { > + if (IS_ERR(path[i])) { > + if (PTR_ERR(path[i]) != -EPROBE_DEFER) > + continue; > + > + ret = qcom_cpufreq_hw_icc_init(res, i); > + if (ret) > + continue; > + } > + > + info = &icc_info[i]; > + > + opp = dev_pm_opp_xlate_required_opp(cpu_opp_table, > + table[info->table_index], > + cpu_opp); > + if (IS_ERR_OR_NULL(opp)) > + continue; > + > + peak_bw = dev_pm_opp_get_bw(opp, &avg_bw); > + dev_pm_opp_put(opp); > + > + icc_set_bw(res->path[i], avg_bw, peak_bw); > + } > + dev_pm_opp_put(cpu_opp); > +} > + > +static int qcom_cpufreq_update_opp(struct device *dev, > + unsigned long freq_khz, > + unsigned long volt) > +{ > + unsigned long freq_hz = freq_khz * 1000; > + > + if (dev_pm_opp_update_voltage(dev, freq_hz, volt)) > + return dev_pm_opp_add(dev, freq_hz, volt); > + > + /* Enable the opp after voltage update*/ > + return dev_pm_opp_enable(dev, freq_hz); > +} > + > static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, > unsigned int index) > { > - void __iomem *perf_state_reg = policy->driver_data; > + struct qcom_cpufreq_hw_res *res = policy->driver_data; > + void __iomem *perf_state_reg = res->base + REG_PERF_STATE; > unsigned long freq = policy->freq_table[index].frequency; > > writel_relaxed(index, perf_state_reg); > > + qcom_cpufreq_hw_icc_set(res, freq); > + > arch_set_freq_scale(policy->related_cpus, freq, > policy->cpuinfo.max_freq); > return 0; > @@ -46,6 +224,7 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, > > static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) > { > + struct qcom_cpufreq_hw_res *res; > void __iomem *perf_state_reg; > struct cpufreq_policy *policy; > unsigned int index; > @@ -54,7 +233,8 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) > if (!policy) > return 0; > > - perf_state_reg = policy->driver_data; > + res = policy->driver_data; > + perf_state_reg = res->base + REG_PERF_STATE; > > index = readl_relaxed(perf_state_reg); > index = min(index, LUT_MAX_ENTRIES - 1); > @@ -65,7 +245,8 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) > static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, > unsigned int target_freq) > { > - void __iomem *perf_state_reg = policy->driver_data; > + struct qcom_cpufreq_hw_res *res = policy->driver_data; > + void __iomem *perf_state_reg = res->base + REG_PERF_STATE; > int index; > unsigned long freq; > > @@ -82,18 +263,24 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, > return freq; > } > > -static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, > - struct cpufreq_policy *policy, > - void __iomem *base) > +static int qcom_cpufreq_hw_read_lut(struct cpufreq_policy *policy, > + struct qcom_cpufreq_hw_res *res) > { > u32 data, src, lval, i, core_count, prev_freq = 0, freq; > u32 volt; > struct cpufreq_frequency_table *table; > + struct device *cpu_dev = res->cpu_dev; > + void __iomem *base = res->base; > + int ret; > > table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); > if (!table) > return -ENOMEM; > > + ret = qcom_cpufreq_hw_add_opp_table(res); > + if (ret) > + dev_dbg(cpu_dev, "Add OPP tables failed from dt\n"); > + > for (i = 0; i < LUT_MAX_ENTRIES; i++) { > data = readl_relaxed(base + REG_FREQ_LUT + > i * LUT_ROW_SIZE); > @@ -112,7 +299,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, > > if (freq != prev_freq && core_count != LUT_TURBO_IND) { > table[i].frequency = freq; > - dev_pm_opp_add(cpu_dev, freq * 1000, volt); > + qcom_cpufreq_update_opp(cpu_dev, freq, volt); > dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, > freq, core_count); > } else if (core_count == LUT_TURBO_IND) { > @@ -133,7 +320,8 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, > if (prev->frequency == CPUFREQ_ENTRY_INVALID) { > prev->frequency = prev_freq; > prev->flags = CPUFREQ_BOOST_FREQ; > - dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt); > + qcom_cpufreq_update_opp(cpu_dev, prev_freq, > + volt); > } > > break; > @@ -175,11 +363,10 @@ static void qcom_get_related_cpus(int index, struct cpumask *m) > static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) > { > struct device *dev = &global_pdev->dev; > + struct qcom_cpufreq_hw_res *res; > struct of_phandle_args args; > struct device_node *cpu_np; > struct device *cpu_dev; > - struct resource *res; > - void __iomem *base; > int ret, index; > > cpu_dev = get_cpu_device(policy->cpu); > @@ -201,16 +388,17 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) > > index = args.args[0]; > > - res = platform_get_resource(global_pdev, IORESOURCE_MEM, index); > + res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); > if (!res) > - return -ENODEV; > - > - base = devm_ioremap(dev, res->start, resource_size(res)); > - if (!base) > return -ENOMEM; > > + res->cpu_dev = cpu_dev; > + res->base = devm_platform_ioremap_resource(global_pdev, index); > + if (IS_ERR(res->base)) > + return PTR_ERR(res->base); > + > /* HW should be in enabled state to proceed */ > - if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) { > + if (!(readl_relaxed(res->base + REG_ENABLE) & 0x1)) { > dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); > ret = -ENODEV; > goto error; > @@ -223,9 +411,9 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) > goto error; > } > > - policy->driver_data = base + REG_PERF_STATE; > + policy->driver_data = res; > > - ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base); > + ret = qcom_cpufreq_hw_read_lut(policy, res); > if (ret) { > dev_err(dev, "Domain-%d failed to read LUT\n", index); > goto error; > @@ -240,22 +428,38 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) > > dev_pm_opp_of_register_em(policy->cpus); > > - policy->fast_switch_possible = true; > + if (!res->opp_table[QCOM_CPU_OPP_TABLE_INDEX]) { > + policy->fast_switch_possible = true; > + } else { > + qcom_cpufreq_hw_icc_init(res, ICC_DDR_PATH); > + qcom_cpufreq_hw_icc_init(res, ICC_L3_PATH); > + } This patch tries to disable silently the fast_switch. The fast_switch is used by SchedUtil governor. Regards, Lukasz > > return 0; > error: > - devm_iounmap(dev, base); > + devm_iounmap(dev, res->base); > + devm_kfree(&global_pdev->dev, res); > return ret; > } > > static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) > { > + struct qcom_cpufreq_hw_res *res = policy->driver_data; > struct device *cpu_dev = get_cpu_device(policy->cpu); > - void __iomem *base = policy->driver_data - REG_PERF_STATE; > + struct opp_table **table = res->opp_table; > + void __iomem *base = res->base; > + int i; > + > + for (i = 0; i <= QCOM_CPU_L3_OPP_TABLE_INDEX; i++) { > + if (table[i]) > + dev_pm_opp_put_opp_table(table[i]); > + } > > dev_pm_opp_remove_all_dynamic(cpu_dev); > kfree(policy->freq_table); > + dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); > devm_iounmap(&global_pdev->dev, base); > + devm_kfree(&global_pdev->dev, res); > > return 0; > } >
Hey Lukasz, Thanks for taking time to review the series! On 2020-01-29 15:05, Lukasz Luba wrote: > Hi Sibi, > > On 1/27/20 8:03 PM, Sibi Sankar wrote: >> Add support to parse and update OPP tables attached to the cpu device >> when the required OPP bandwidth values are populated to enable scaling >> of DDR/L3 bandwidth levels with frequency change. >> >> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> >> --- >> drivers/cpufreq/qcom-cpufreq-hw.c | 246 >> +++++++++++++++++++++++++++--- >> 1 file changed, 225 insertions(+), 21 deletions(-) >> >> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c >> b/drivers/cpufreq/qcom-cpufreq-hw.c >> index fc92a8842e252..348eb2fdaccaf 100644 >> --- a/drivers/cpufreq/qcom-cpufreq-hw.c >> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c >> @@ -6,6 +6,7 @@ >> #include <linux/bitfield.h> >> #include <linux/cpufreq.h> >> #include <linux/init.h> >> +#include <linux/interconnect.h> >> #include <linux/kernel.h> >> #include <linux/module.h> >> #include <linux/of_address.h> >> @@ -28,17 +29,194 @@ >> #define REG_VOLT_LUT 0x114 >> #define REG_PERF_STATE 0x920 >> +#define QCOM_ICC_TAG_ACTIVE_ONLY 1 >> + >> static unsigned long cpu_hw_rate, xo_rate; >> static struct platform_device *global_pdev; >> +/* opp table indices */ >> +enum { >> + QCOM_CPU_OPP_TABLE_INDEX, >> + QCOM_CPU_DDR_OPP_TABLE_INDEX, >> + QCOM_CPU_L3_OPP_TABLE_INDEX, >> +}; >> + >> +/* icc path indices */ >> +enum { >> + ICC_DDR_PATH, >> + ICC_L3_PATH, >> +}; >> + >> +struct qcom_cpufreq_hw_res { >> + void __iomem *base; >> + >> + struct device *cpu_dev; >> + >> + /* ddr/l3 icc paths */ >> + struct icc_path *path[2]; >> + >> + /* cpu/ddr/l3 opp tables */ >> + struct opp_table *opp_table[3]; >> +}; >> + >> +struct cpufreq_hw_icc_info { >> + const char *icc_path_name; >> + u8 table_index; >> + u32 tag; >> +}; >> + >> +static const struct cpufreq_hw_icc_info icc_info[] = { >> + { >> + .icc_path_name = "cpu-ddr", >> + .table_index = QCOM_CPU_DDR_OPP_TABLE_INDEX, >> + .tag = QCOM_ICC_TAG_ACTIVE_ONLY, >> + }, >> + { >> + .icc_path_name = "cpu-l3", >> + .table_index = QCOM_CPU_L3_OPP_TABLE_INDEX, >> + .tag = 0, >> + }, >> +}; >> + >> +static int qcom_cpufreq_hw_add_opp_table(struct qcom_cpufreq_hw_res >> *res) >> +{ >> + struct opp_table **table = res->opp_table; >> + struct device_node *opp_table_np, *np; >> + struct device *dev = res->cpu_dev; >> + int ret, i; >> + u64 rate; >> + >> + for (i = 0; i <= QCOM_CPU_L3_OPP_TABLE_INDEX; i++) { >> + ret = dev_pm_opp_of_add_table_indexed(dev, i); >> + if (ret) { >> + dev_dbg(dev, "Add OPP table failed index %d: %d\n", >> + i, ret); >> + goto err; >> + } >> + >> + table[i] = dev_pm_opp_get_opp_table_indexed(dev, i); >> + if (!table[i]) { >> + dev_dbg(dev, "Get OPP table failed index %d\n", i); >> + ret = -EINVAL; >> + goto err; >> + } >> + } >> + >> + /* Disable all cpu opps and cross-validate against LUT */ >> + opp_table_np = dev_pm_opp_of_get_opp_desc_node(dev); >> + for_each_available_child_of_node(opp_table_np, np) { >> + ret = of_property_read_u64(np, "opp-hz", &rate); >> + if (ret) >> + continue; >> + >> + dev_pm_opp_disable(dev, rate); >> + } >> + of_node_put(opp_table_np); >> + >> + return 0; >> + >> +err: >> + for (; i >= 0; i--) { >> + if (table[i]) { >> + dev_pm_opp_put_opp_table(table[i]); >> + table[i] = NULL; >> + } >> + } >> + >> + dev_pm_opp_remove_table(dev); >> + return ret; >> +} >> + >> +static int qcom_cpufreq_hw_icc_init(struct qcom_cpufreq_hw_res *res, >> u8 index) >> +{ >> + const struct cpufreq_hw_icc_info *info = &icc_info[index]; >> + struct icc_path **path = res->path; >> + struct device *dev = res->cpu_dev; >> + >> + path[index] = of_icc_get(dev, info->icc_path_name); >> + if (IS_ERR(path[index])) { >> + dev_dbg(dev, "ICC %s path get failed ret: %ld\n", >> + info->icc_path_name, PTR_ERR(path[index])); >> + return PTR_ERR(path[index]); >> + } >> + >> + icc_set_tag(path[index], info->tag); >> + >> + return 0; >> +} >> + >> +static void qcom_cpufreq_hw_icc_set(struct qcom_cpufreq_hw_res *res, >> + unsigned long freq) >> +{ >> + struct opp_table **table = res->opp_table; >> + const struct cpufreq_hw_icc_info *info; >> + unsigned long freq_hz = freq * 1000; >> + struct icc_path **path = res->path; >> + struct device *dev = res->cpu_dev; >> + struct dev_pm_opp *cpu_opp, *opp; >> + struct opp_table *cpu_opp_table; >> + unsigned long peak_bw, avg_bw; >> + int ret; >> + int i; >> + >> + cpu_opp_table = table[QCOM_CPU_OPP_TABLE_INDEX]; >> + if (!cpu_opp_table) >> + return; >> + >> + cpu_opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); >> + if (IS_ERR_OR_NULL(cpu_opp)) >> + return; >> + >> + for (i = 0; i <= ICC_L3_PATH; i++) { >> + if (IS_ERR(path[i])) { >> + if (PTR_ERR(path[i]) != -EPROBE_DEFER) >> + continue; >> + >> + ret = qcom_cpufreq_hw_icc_init(res, i); >> + if (ret) >> + continue; >> + } >> + >> + info = &icc_info[i]; >> + >> + opp = dev_pm_opp_xlate_required_opp(cpu_opp_table, >> + table[info->table_index], >> + cpu_opp); >> + if (IS_ERR_OR_NULL(opp)) >> + continue; >> + >> + peak_bw = dev_pm_opp_get_bw(opp, &avg_bw); >> + dev_pm_opp_put(opp); >> + >> + icc_set_bw(res->path[i], avg_bw, peak_bw); >> + } >> + dev_pm_opp_put(cpu_opp); >> +} >> + >> +static int qcom_cpufreq_update_opp(struct device *dev, >> + unsigned long freq_khz, >> + unsigned long volt) >> +{ >> + unsigned long freq_hz = freq_khz * 1000; >> + >> + if (dev_pm_opp_update_voltage(dev, freq_hz, volt)) >> + return dev_pm_opp_add(dev, freq_hz, volt); >> + >> + /* Enable the opp after voltage update*/ >> + return dev_pm_opp_enable(dev, freq_hz); >> +} >> + >> static int qcom_cpufreq_hw_target_index(struct cpufreq_policy >> *policy, >> unsigned int index) >> { >> - void __iomem *perf_state_reg = policy->driver_data; >> + struct qcom_cpufreq_hw_res *res = policy->driver_data; >> + void __iomem *perf_state_reg = res->base + REG_PERF_STATE; >> unsigned long freq = policy->freq_table[index].frequency; >> writel_relaxed(index, perf_state_reg); >> + qcom_cpufreq_hw_icc_set(res, freq); >> + >> arch_set_freq_scale(policy->related_cpus, freq, >> policy->cpuinfo.max_freq); >> return 0; >> @@ -46,6 +224,7 @@ static int qcom_cpufreq_hw_target_index(struct >> cpufreq_policy *policy, >> static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) >> { >> + struct qcom_cpufreq_hw_res *res; >> void __iomem *perf_state_reg; >> struct cpufreq_policy *policy; >> unsigned int index; >> @@ -54,7 +233,8 @@ static unsigned int qcom_cpufreq_hw_get(unsigned >> int cpu) >> if (!policy) >> return 0; >> - perf_state_reg = policy->driver_data; >> + res = policy->driver_data; >> + perf_state_reg = res->base + REG_PERF_STATE; >> index = readl_relaxed(perf_state_reg); >> index = min(index, LUT_MAX_ENTRIES - 1); >> @@ -65,7 +245,8 @@ static unsigned int qcom_cpufreq_hw_get(unsigned >> int cpu) >> static unsigned int qcom_cpufreq_hw_fast_switch(struct >> cpufreq_policy *policy, >> unsigned int target_freq) >> { >> - void __iomem *perf_state_reg = policy->driver_data; >> + struct qcom_cpufreq_hw_res *res = policy->driver_data; >> + void __iomem *perf_state_reg = res->base + REG_PERF_STATE; >> int index; >> unsigned long freq; >> @@ -82,18 +263,24 @@ static unsigned int >> qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, >> return freq; >> } >> -static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, >> - struct cpufreq_policy *policy, >> - void __iomem *base) >> +static int qcom_cpufreq_hw_read_lut(struct cpufreq_policy *policy, >> + struct qcom_cpufreq_hw_res *res) >> { >> u32 data, src, lval, i, core_count, prev_freq = 0, freq; >> u32 volt; >> struct cpufreq_frequency_table *table; >> + struct device *cpu_dev = res->cpu_dev; >> + void __iomem *base = res->base; >> + int ret; >> table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); >> if (!table) >> return -ENOMEM; >> + ret = qcom_cpufreq_hw_add_opp_table(res); >> + if (ret) >> + dev_dbg(cpu_dev, "Add OPP tables failed from dt\n"); >> + >> for (i = 0; i < LUT_MAX_ENTRIES; i++) { >> data = readl_relaxed(base + REG_FREQ_LUT + >> i * LUT_ROW_SIZE); >> @@ -112,7 +299,7 @@ static int qcom_cpufreq_hw_read_lut(struct device >> *cpu_dev, >> if (freq != prev_freq && core_count != LUT_TURBO_IND) { >> table[i].frequency = freq; >> - dev_pm_opp_add(cpu_dev, freq * 1000, volt); >> + qcom_cpufreq_update_opp(cpu_dev, freq, volt); >> dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, >> freq, core_count); >> } else if (core_count == LUT_TURBO_IND) { >> @@ -133,7 +320,8 @@ static int qcom_cpufreq_hw_read_lut(struct device >> *cpu_dev, >> if (prev->frequency == CPUFREQ_ENTRY_INVALID) { >> prev->frequency = prev_freq; >> prev->flags = CPUFREQ_BOOST_FREQ; >> - dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt); >> + qcom_cpufreq_update_opp(cpu_dev, prev_freq, >> + volt); >> } >> break; >> @@ -175,11 +363,10 @@ static void qcom_get_related_cpus(int index, >> struct cpumask *m) >> static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) >> { >> struct device *dev = &global_pdev->dev; >> + struct qcom_cpufreq_hw_res *res; >> struct of_phandle_args args; >> struct device_node *cpu_np; >> struct device *cpu_dev; >> - struct resource *res; >> - void __iomem *base; >> int ret, index; >> cpu_dev = get_cpu_device(policy->cpu); >> @@ -201,16 +388,17 @@ static int qcom_cpufreq_hw_cpu_init(struct >> cpufreq_policy *policy) >> index = args.args[0]; >> - res = platform_get_resource(global_pdev, IORESOURCE_MEM, index); >> + res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); >> if (!res) >> - return -ENODEV; >> - >> - base = devm_ioremap(dev, res->start, resource_size(res)); >> - if (!base) >> return -ENOMEM; >> + res->cpu_dev = cpu_dev; >> + res->base = devm_platform_ioremap_resource(global_pdev, index); >> + if (IS_ERR(res->base)) >> + return PTR_ERR(res->base); >> + >> /* HW should be in enabled state to proceed */ >> - if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) { >> + if (!(readl_relaxed(res->base + REG_ENABLE) & 0x1)) { >> dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); >> ret = -ENODEV; >> goto error; >> @@ -223,9 +411,9 @@ static int qcom_cpufreq_hw_cpu_init(struct >> cpufreq_policy *policy) >> goto error; >> } >> - policy->driver_data = base + REG_PERF_STATE; >> + policy->driver_data = res; >> - ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base); >> + ret = qcom_cpufreq_hw_read_lut(policy, res); >> if (ret) { >> dev_err(dev, "Domain-%d failed to read LUT\n", index); >> goto error; >> @@ -240,22 +428,38 @@ static int qcom_cpufreq_hw_cpu_init(struct >> cpufreq_policy *policy) >> dev_pm_opp_of_register_em(policy->cpus); >> - policy->fast_switch_possible = true; >> + if (!res->opp_table[QCOM_CPU_OPP_TABLE_INDEX]) { >> + policy->fast_switch_possible = true; >> + } else { >> + qcom_cpufreq_hw_icc_init(res, ICC_DDR_PATH); >> + qcom_cpufreq_hw_icc_init(res, ICC_L3_PATH); >> + } > > This patch tries to disable silently the fast_switch. The fast_switch > is used by SchedUtil governor. I agree that the series would benefit from splitting this patch into more chunks. SchedUtil will still be used as the governor but will operate in the slow path. The main reason is that the icc bandwidth votes through rpmh on SDM845/SC7180 cant be done in the fast path. > > Regards, > Lukasz > >> return 0; >> error: >> - devm_iounmap(dev, base); >> + devm_iounmap(dev, res->base); >> + devm_kfree(&global_pdev->dev, res); >> return ret; >> } >> static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) >> { >> + struct qcom_cpufreq_hw_res *res = policy->driver_data; >> struct device *cpu_dev = get_cpu_device(policy->cpu); >> - void __iomem *base = policy->driver_data - REG_PERF_STATE; >> + struct opp_table **table = res->opp_table; >> + void __iomem *base = res->base; >> + int i; >> + >> + for (i = 0; i <= QCOM_CPU_L3_OPP_TABLE_INDEX; i++) { >> + if (table[i]) >> + dev_pm_opp_put_opp_table(table[i]); >> + } >> dev_pm_opp_remove_all_dynamic(cpu_dev); >> kfree(policy->freq_table); >> + dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); >> devm_iounmap(&global_pdev->dev, base); >> + devm_kfree(&global_pdev->dev, res); >> return 0; >> } >>
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index fc92a8842e252..348eb2fdaccaf 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -6,6 +6,7 @@ #include <linux/bitfield.h> #include <linux/cpufreq.h> #include <linux/init.h> +#include <linux/interconnect.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_address.h> @@ -28,17 +29,194 @@ #define REG_VOLT_LUT 0x114 #define REG_PERF_STATE 0x920 +#define QCOM_ICC_TAG_ACTIVE_ONLY 1 + static unsigned long cpu_hw_rate, xo_rate; static struct platform_device *global_pdev; +/* opp table indices */ +enum { + QCOM_CPU_OPP_TABLE_INDEX, + QCOM_CPU_DDR_OPP_TABLE_INDEX, + QCOM_CPU_L3_OPP_TABLE_INDEX, +}; + +/* icc path indices */ +enum { + ICC_DDR_PATH, + ICC_L3_PATH, +}; + +struct qcom_cpufreq_hw_res { + void __iomem *base; + + struct device *cpu_dev; + + /* ddr/l3 icc paths */ + struct icc_path *path[2]; + + /* cpu/ddr/l3 opp tables */ + struct opp_table *opp_table[3]; +}; + +struct cpufreq_hw_icc_info { + const char *icc_path_name; + u8 table_index; + u32 tag; +}; + +static const struct cpufreq_hw_icc_info icc_info[] = { + { + .icc_path_name = "cpu-ddr", + .table_index = QCOM_CPU_DDR_OPP_TABLE_INDEX, + .tag = QCOM_ICC_TAG_ACTIVE_ONLY, + }, + { + .icc_path_name = "cpu-l3", + .table_index = QCOM_CPU_L3_OPP_TABLE_INDEX, + .tag = 0, + }, +}; + +static int qcom_cpufreq_hw_add_opp_table(struct qcom_cpufreq_hw_res *res) +{ + struct opp_table **table = res->opp_table; + struct device_node *opp_table_np, *np; + struct device *dev = res->cpu_dev; + int ret, i; + u64 rate; + + for (i = 0; i <= QCOM_CPU_L3_OPP_TABLE_INDEX; i++) { + ret = dev_pm_opp_of_add_table_indexed(dev, i); + if (ret) { + dev_dbg(dev, "Add OPP table failed index %d: %d\n", + i, ret); + goto err; + } + + table[i] = dev_pm_opp_get_opp_table_indexed(dev, i); + if (!table[i]) { + dev_dbg(dev, "Get OPP table failed index %d\n", i); + ret = -EINVAL; + goto err; + } + } + + /* Disable all cpu opps and cross-validate against LUT */ + opp_table_np = dev_pm_opp_of_get_opp_desc_node(dev); + for_each_available_child_of_node(opp_table_np, np) { + ret = of_property_read_u64(np, "opp-hz", &rate); + if (ret) + continue; + + dev_pm_opp_disable(dev, rate); + } + of_node_put(opp_table_np); + + return 0; + +err: + for (; i >= 0; i--) { + if (table[i]) { + dev_pm_opp_put_opp_table(table[i]); + table[i] = NULL; + } + } + + dev_pm_opp_remove_table(dev); + return ret; +} + +static int qcom_cpufreq_hw_icc_init(struct qcom_cpufreq_hw_res *res, u8 index) +{ + const struct cpufreq_hw_icc_info *info = &icc_info[index]; + struct icc_path **path = res->path; + struct device *dev = res->cpu_dev; + + path[index] = of_icc_get(dev, info->icc_path_name); + if (IS_ERR(path[index])) { + dev_dbg(dev, "ICC %s path get failed ret: %ld\n", + info->icc_path_name, PTR_ERR(path[index])); + return PTR_ERR(path[index]); + } + + icc_set_tag(path[index], info->tag); + + return 0; +} + +static void qcom_cpufreq_hw_icc_set(struct qcom_cpufreq_hw_res *res, + unsigned long freq) +{ + struct opp_table **table = res->opp_table; + const struct cpufreq_hw_icc_info *info; + unsigned long freq_hz = freq * 1000; + struct icc_path **path = res->path; + struct device *dev = res->cpu_dev; + struct dev_pm_opp *cpu_opp, *opp; + struct opp_table *cpu_opp_table; + unsigned long peak_bw, avg_bw; + int ret; + int i; + + cpu_opp_table = table[QCOM_CPU_OPP_TABLE_INDEX]; + if (!cpu_opp_table) + return; + + cpu_opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); + if (IS_ERR_OR_NULL(cpu_opp)) + return; + + for (i = 0; i <= ICC_L3_PATH; i++) { + if (IS_ERR(path[i])) { + if (PTR_ERR(path[i]) != -EPROBE_DEFER) + continue; + + ret = qcom_cpufreq_hw_icc_init(res, i); + if (ret) + continue; + } + + info = &icc_info[i]; + + opp = dev_pm_opp_xlate_required_opp(cpu_opp_table, + table[info->table_index], + cpu_opp); + if (IS_ERR_OR_NULL(opp)) + continue; + + peak_bw = dev_pm_opp_get_bw(opp, &avg_bw); + dev_pm_opp_put(opp); + + icc_set_bw(res->path[i], avg_bw, peak_bw); + } + dev_pm_opp_put(cpu_opp); +} + +static int qcom_cpufreq_update_opp(struct device *dev, + unsigned long freq_khz, + unsigned long volt) +{ + unsigned long freq_hz = freq_khz * 1000; + + if (dev_pm_opp_update_voltage(dev, freq_hz, volt)) + return dev_pm_opp_add(dev, freq_hz, volt); + + /* Enable the opp after voltage update*/ + return dev_pm_opp_enable(dev, freq_hz); +} + static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, unsigned int index) { - void __iomem *perf_state_reg = policy->driver_data; + struct qcom_cpufreq_hw_res *res = policy->driver_data; + void __iomem *perf_state_reg = res->base + REG_PERF_STATE; unsigned long freq = policy->freq_table[index].frequency; writel_relaxed(index, perf_state_reg); + qcom_cpufreq_hw_icc_set(res, freq); + arch_set_freq_scale(policy->related_cpus, freq, policy->cpuinfo.max_freq); return 0; @@ -46,6 +224,7 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) { + struct qcom_cpufreq_hw_res *res; void __iomem *perf_state_reg; struct cpufreq_policy *policy; unsigned int index; @@ -54,7 +233,8 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) if (!policy) return 0; - perf_state_reg = policy->driver_data; + res = policy->driver_data; + perf_state_reg = res->base + REG_PERF_STATE; index = readl_relaxed(perf_state_reg); index = min(index, LUT_MAX_ENTRIES - 1); @@ -65,7 +245,8 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, unsigned int target_freq) { - void __iomem *perf_state_reg = policy->driver_data; + struct qcom_cpufreq_hw_res *res = policy->driver_data; + void __iomem *perf_state_reg = res->base + REG_PERF_STATE; int index; unsigned long freq; @@ -82,18 +263,24 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, return freq; } -static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, - struct cpufreq_policy *policy, - void __iomem *base) +static int qcom_cpufreq_hw_read_lut(struct cpufreq_policy *policy, + struct qcom_cpufreq_hw_res *res) { u32 data, src, lval, i, core_count, prev_freq = 0, freq; u32 volt; struct cpufreq_frequency_table *table; + struct device *cpu_dev = res->cpu_dev; + void __iomem *base = res->base; + int ret; table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); if (!table) return -ENOMEM; + ret = qcom_cpufreq_hw_add_opp_table(res); + if (ret) + dev_dbg(cpu_dev, "Add OPP tables failed from dt\n"); + for (i = 0; i < LUT_MAX_ENTRIES; i++) { data = readl_relaxed(base + REG_FREQ_LUT + i * LUT_ROW_SIZE); @@ -112,7 +299,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, if (freq != prev_freq && core_count != LUT_TURBO_IND) { table[i].frequency = freq; - dev_pm_opp_add(cpu_dev, freq * 1000, volt); + qcom_cpufreq_update_opp(cpu_dev, freq, volt); dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, freq, core_count); } else if (core_count == LUT_TURBO_IND) { @@ -133,7 +320,8 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, if (prev->frequency == CPUFREQ_ENTRY_INVALID) { prev->frequency = prev_freq; prev->flags = CPUFREQ_BOOST_FREQ; - dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt); + qcom_cpufreq_update_opp(cpu_dev, prev_freq, + volt); } break; @@ -175,11 +363,10 @@ static void qcom_get_related_cpus(int index, struct cpumask *m) static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) { struct device *dev = &global_pdev->dev; + struct qcom_cpufreq_hw_res *res; struct of_phandle_args args; struct device_node *cpu_np; struct device *cpu_dev; - struct resource *res; - void __iomem *base; int ret, index; cpu_dev = get_cpu_device(policy->cpu); @@ -201,16 +388,17 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) index = args.args[0]; - res = platform_get_resource(global_pdev, IORESOURCE_MEM, index); + res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); if (!res) - return -ENODEV; - - base = devm_ioremap(dev, res->start, resource_size(res)); - if (!base) return -ENOMEM; + res->cpu_dev = cpu_dev; + res->base = devm_platform_ioremap_resource(global_pdev, index); + if (IS_ERR(res->base)) + return PTR_ERR(res->base); + /* HW should be in enabled state to proceed */ - if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) { + if (!(readl_relaxed(res->base + REG_ENABLE) & 0x1)) { dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); ret = -ENODEV; goto error; @@ -223,9 +411,9 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) goto error; } - policy->driver_data = base + REG_PERF_STATE; + policy->driver_data = res; - ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base); + ret = qcom_cpufreq_hw_read_lut(policy, res); if (ret) { dev_err(dev, "Domain-%d failed to read LUT\n", index); goto error; @@ -240,22 +428,38 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) dev_pm_opp_of_register_em(policy->cpus); - policy->fast_switch_possible = true; + if (!res->opp_table[QCOM_CPU_OPP_TABLE_INDEX]) { + policy->fast_switch_possible = true; + } else { + qcom_cpufreq_hw_icc_init(res, ICC_DDR_PATH); + qcom_cpufreq_hw_icc_init(res, ICC_L3_PATH); + } return 0; error: - devm_iounmap(dev, base); + devm_iounmap(dev, res->base); + devm_kfree(&global_pdev->dev, res); return ret; } static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) { + struct qcom_cpufreq_hw_res *res = policy->driver_data; struct device *cpu_dev = get_cpu_device(policy->cpu); - void __iomem *base = policy->driver_data - REG_PERF_STATE; + struct opp_table **table = res->opp_table; + void __iomem *base = res->base; + int i; + + for (i = 0; i <= QCOM_CPU_L3_OPP_TABLE_INDEX; i++) { + if (table[i]) + dev_pm_opp_put_opp_table(table[i]); + } dev_pm_opp_remove_all_dynamic(cpu_dev); kfree(policy->freq_table); + dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); devm_iounmap(&global_pdev->dev, base); + devm_kfree(&global_pdev->dev, res); return 0; }
Add support to parse and update OPP tables attached to the cpu device when the required OPP bandwidth values are populated to enable scaling of DDR/L3 bandwidth levels with frequency change. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- drivers/cpufreq/qcom-cpufreq-hw.c | 246 +++++++++++++++++++++++++++--- 1 file changed, 225 insertions(+), 21 deletions(-)