| Message ID | 1578483143-14905-5-git-send-email-gengdongjiu@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add ARMv8 RAS virtualization support in QEMU | expand |
On Wed, 8 Jan 2020 19:32:18 +0800 Dongjiu Geng <gengdongjiu@huawei.com> wrote: > This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. > Now it only supports ARMv8 SEA, a type of Generic Hardware Error > Source version 2(GHESv2) error source. Afterwards, we can extend > the supported types if needed. For the CPER section, currently it > is memory section because kernel mainly wants userspace to handle > the memory errors. > > This patch follows the spec ACPI 6.2 to build the Hardware Error > Source table. For more detailed information, please refer to > document: docs/specs/acpi_hest_ghes.rst > > build_append_ghes_notify() will help to add Hardware Error Notification > to ACPI tables without using packed C structures and avoid endianness > issues as API doesn't need explicit conversion. > > Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> > Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Overall it looks fine to me, see couple nits below > --- > hw/acpi/ghes.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++- > hw/arm/virt-acpi-build.c | 2 + > include/hw/acpi/ghes.h | 40 ++++++++++++++++ > 3 files changed, 159 insertions(+), 1 deletion(-) > > diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c > index b7fdbbb..9d37798 100644 > --- a/hw/acpi/ghes.c > +++ b/hw/acpi/ghes.c > @@ -34,9 +34,42 @@ > > /* The max size in bytes for one error block */ > #define ACPI_GHES_MAX_RAW_DATA_LENGTH 0x400 > - > /* Now only support ARMv8 SEA notification type error source */ > #define ACPI_GHES_ERROR_SOURCE_COUNT 1 > +/* Generic Hardware Error Source version 2 */ > +#define ACPI_GHES_SOURCE_GENERIC_ERROR_V2 10 > +/* Address offset in Generic Address Structure(GAS) */ > +#define GAS_ADDR_OFFSET 4 > + > +/* > + * Hardware Error Notification > + * ACPI 4.0: 17.3.2.7 Hardware Error Notification > + * Composes dummy Hardware Error Notification descriptor of specified type > + */ > +static void build_ghes_hw_error_notification(GArray *table, const uint8_t type) > +{ > + /* Type */ > + build_append_int_noprefix(table, type, 1); > + /* > + * Length: > + * Total length of the structure in bytes > + */ > + build_append_int_noprefix(table, 28, 1); > + /* Configuration Write Enable */ > + build_append_int_noprefix(table, 0, 2); > + /* Poll Interval */ > + build_append_int_noprefix(table, 0, 4); > + /* Vector */ > + build_append_int_noprefix(table, 0, 4); > + /* Switch To Polling Threshold Value */ > + build_append_int_noprefix(table, 0, 4); > + /* Switch To Polling Threshold Window */ > + build_append_int_noprefix(table, 0, 4); > + /* Error Threshold Value */ > + build_append_int_noprefix(table, 0, 4); > + /* Error Threshold Window */ > + build_append_int_noprefix(table, 0, 4); > +} > > /* > * Build table for the hardware error fw_cfg blob. > @@ -92,3 +125,86 @@ void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker) > bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, > 0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); > } > + > +/* Build Generic Hardware Error Source version 2 (GHESv2) */ > +static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker) > +{ > + uint64_t address_offset; > + /* > + * Type: > + * Generic Hardware Error Source version 2(GHESv2 - Type 10) > + */ > + build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2); > + /* Source Id */ > + build_append_int_noprefix(table_data, source_id, 2); > + /* Related Source Id */ > + build_append_int_noprefix(table_data, 0xffff, 2); > + /* Flags */ > + build_append_int_noprefix(table_data, 0, 1); > + /* Enabled */ > + build_append_int_noprefix(table_data, 1, 1); > + > + /* Number of Records To Pre-allocate */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max Sections Per Record */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max Raw Data Length */ > + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); > + > + address_offset = table_data->len; > + /* Error Status Address */ > + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, > + 4 /* QWord access */, 0); > + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, > + address_offset + GAS_ADDR_OFFSET, > + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); > + > + /* > + * Notification Structure > + * Now only enable ARMv8 SEA notification type > + */ > + build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA); > + > + /* Error Status Block Length */ > + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); > + > + /* > + * Read Ack Register > + * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source > + * version 2 (GHESv2 - Type 10) > + */ > + address_offset = table_data->len; > + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, > + 4 /* QWord access */, 0); > + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, > + address_offset + GAS_ADDR_OFFSET, > + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, > + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t)); > + > + /* > + * Read Ack Preserve > + * We only provide the first bit in Read Ack Register to OSPM to write > + * while the other bits are preserved. > + */ > + build_append_int_noprefix(table_data, ~0x1ULL, 8); > + /* Read Ack Write */ > + build_append_int_noprefix(table_data, 0x1, 8); > +} > + > +/* Build Hardware Error Source Table */ > +void acpi_build_hest(GArray *table_data, GArray *hardware_errors, ^^^^^^^^ it seems to be unused, so why it's here? > + BIOSLinker *linker) > +{ > + uint64_t hest_start = table_data->len; > + > + /* Hardware Error Source Table header*/ > + acpi_data_push(table_data, sizeof(AcpiTableHeader)); > + > + /* Error Source Count */ > + build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4); > + > + build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker); > + > + build_header(linker, table_data, (void *)(table_data->data + hest_start), > + "HEST", table_data->len - hest_start, 1, NULL, ""); > +} > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c > index 6819fcf..837bbf9 100644 > --- a/hw/arm/virt-acpi-build.c > +++ b/hw/arm/virt-acpi-build.c > @@ -834,6 +834,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) > if (vms->ras) { > acpi_add_table(table_offsets, tables_blob); > build_ghes_error_table(tables->hardware_errors, tables->linker); > + acpi_build_hest(tables_blob, tables->hardware_errors, > + tables->linker); not aligned properly you can use ./scripts/checkpatch.pl to see if there is style errors > } > > if (ms->numa_state->num_nodes > 0) { > diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h > index 3dbda3f..09a7f86 100644 > --- a/include/hw/acpi/ghes.h > +++ b/include/hw/acpi/ghes.h > @@ -22,5 +22,45 @@ > #ifndef ACPI_GHES_H > #define ACPI_GHES_H > > +/* > + * Values for Hardware Error Notification Type field > + */ > +enum AcpiGhesNotifyType { > + /* Polled */ > + ACPI_GHES_NOTIFY_POLLED = 0, > + /* External Interrupt */ > + ACPI_GHES_NOTIFY_EXTERNAL = 1, > + /* Local Interrupt */ > + ACPI_GHES_NOTIFY_LOCAL = 2, > + /* SCI */ > + ACPI_GHES_NOTIFY_SCI = 3, > + /* NMI */ > + ACPI_GHES_NOTIFY_NMI = 4, > + /* CMCI, ACPI 5.0: 18.3.2.7, Table 18-290 */ > + ACPI_GHES_NOTIFY_CMCI = 5, > + /* MCE, ACPI 5.0: 18.3.2.7, Table 18-290 */ > + ACPI_GHES_NOTIFY_MCE = 6, > + /* GPIO-Signal, ACPI 6.0: 18.3.2.7, Table 18-332 */ > + ACPI_GHES_NOTIFY_GPIO = 7, > + /* ARMv8 SEA, ACPI 6.1: 18.3.2.9, Table 18-345 */ > + ACPI_GHES_NOTIFY_SEA = 8, > + /* ARMv8 SEI, ACPI 6.1: 18.3.2.9, Table 18-345 */ > + ACPI_GHES_NOTIFY_SEI = 9, > + /* External Interrupt - GSIV, ACPI 6.1: 18.3.2.9, Table 18-345 */ > + ACPI_GHES_NOTIFY_GSIV = 10, > + /* Software Delegated Exception, ACPI 6.2: 18.3.2.9, Table 18-383 */ > + ACPI_GHES_NOTIFY_SDEI = 11, > + /* 12 and greater are reserved */ > + ACPI_GHES_NOTIFY_RESERVED = 12 > +}; > + > +enum { > + ACPI_HEST_SRC_ID_SEA = 0, > + /* future ids go here */ > + ACPI_HEST_SRC_ID_RESERVED, > +}; > + > void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker); > +void acpi_build_hest(GArray *table_data, GArray *hardware_error, > + BIOSLinker *linker); > #endif
On 2020/1/23 23:48, Igor Mammedov wrote: > On Wed, 8 Jan 2020 19:32:18 +0800 > Dongjiu Geng <gengdongjiu@huawei.com> wrote: > >> This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. >> Now it only supports ARMv8 SEA, a type of Generic Hardware Error >> Source version 2(GHESv2) error source. Afterwards, we can extend >> the supported types if needed. For the CPER section, currently it >> is memory section because kernel mainly wants userspace to handle >> the memory errors. >> >> This patch follows the spec ACPI 6.2 to build the Hardware Error >> Source table. For more detailed information, please refer to >> document: docs/specs/acpi_hest_ghes.rst >> >> build_append_ghes_notify() will help to add Hardware Error Notification >> to ACPI tables without using packed C structures and avoid endianness >> issues as API doesn't need explicit conversion. >> >> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> >> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> >> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> >> Acked-by: Xiang Zheng <zhengxiang9@huawei.com> > > > Overall it looks fine to me, see couple nits below > > >> --- >> hw/acpi/ghes.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++- >> hw/arm/virt-acpi-build.c | 2 + >> include/hw/acpi/ghes.h | 40 ++++++++++++++++ >> 3 files changed, 159 insertions(+), 1 deletion(-) >> >> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c >> index b7fdbbb..9d37798 100644 >> --- a/hw/acpi/ghes.c >> +++ b/hw/acpi/ghes.c >> @@ -34,9 +34,42 @@ >> >> /* The max size in bytes for one error block */ >> #define ACPI_GHES_MAX_RAW_DATA_LENGTH 0x400 >> - >> /* Now only support ARMv8 SEA notification type error source */ >> #define ACPI_GHES_ERROR_SOURCE_COUNT 1 >> +/* Generic Hardware Error Source version 2 */ >> +#define ACPI_GHES_SOURCE_GENERIC_ERROR_V2 10 >> +/* Address offset in Generic Address Structure(GAS) */ >> +#define GAS_ADDR_OFFSET 4 >> + >> +/* >> + * Hardware Error Notification >> + * ACPI 4.0: 17.3.2.7 Hardware Error Notification >> + * Composes dummy Hardware Error Notification descriptor of specified type >> + */ >> +static void build_ghes_hw_error_notification(GArray *table, const uint8_t type) >> +{ >> + /* Type */ >> + build_append_int_noprefix(table, type, 1); >> + /* >> + * Length: >> + * Total length of the structure in bytes >> + */ >> + build_append_int_noprefix(table, 28, 1); >> + /* Configuration Write Enable */ >> + build_append_int_noprefix(table, 0, 2); >> + /* Poll Interval */ >> + build_append_int_noprefix(table, 0, 4); >> + /* Vector */ >> + build_append_int_noprefix(table, 0, 4); >> + /* Switch To Polling Threshold Value */ >> + build_append_int_noprefix(table, 0, 4); >> + /* Switch To Polling Threshold Window */ >> + build_append_int_noprefix(table, 0, 4); >> + /* Error Threshold Value */ >> + build_append_int_noprefix(table, 0, 4); >> + /* Error Threshold Window */ >> + build_append_int_noprefix(table, 0, 4); >> +} >> >> /* >> * Build table for the hardware error fw_cfg blob. >> @@ -92,3 +125,86 @@ void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker) >> bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, >> 0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); >> } >> + >> +/* Build Generic Hardware Error Source version 2 (GHESv2) */ >> +static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker) >> +{ >> + uint64_t address_offset; >> + /* >> + * Type: >> + * Generic Hardware Error Source version 2(GHESv2 - Type 10) >> + */ >> + build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2); >> + /* Source Id */ >> + build_append_int_noprefix(table_data, source_id, 2); >> + /* Related Source Id */ >> + build_append_int_noprefix(table_data, 0xffff, 2); >> + /* Flags */ >> + build_append_int_noprefix(table_data, 0, 1); >> + /* Enabled */ >> + build_append_int_noprefix(table_data, 1, 1); >> + >> + /* Number of Records To Pre-allocate */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max Sections Per Record */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max Raw Data Length */ >> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); >> + >> + address_offset = table_data->len; >> + /* Error Status Address */ >> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, >> + 4 /* QWord access */, 0); >> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, >> + address_offset + GAS_ADDR_OFFSET, >> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); >> + >> + /* >> + * Notification Structure >> + * Now only enable ARMv8 SEA notification type >> + */ >> + build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA); >> + >> + /* Error Status Block Length */ >> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); >> + >> + /* >> + * Read Ack Register >> + * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source >> + * version 2 (GHESv2 - Type 10) >> + */ >> + address_offset = table_data->len; >> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, >> + 4 /* QWord access */, 0); >> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, >> + address_offset + GAS_ADDR_OFFSET, >> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, >> + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t)); >> + >> + /* >> + * Read Ack Preserve >> + * We only provide the first bit in Read Ack Register to OSPM to write >> + * while the other bits are preserved. >> + */ >> + build_append_int_noprefix(table_data, ~0x1ULL, 8); >> + /* Read Ack Write */ >> + build_append_int_noprefix(table_data, 0x1, 8); >> +} >> + >> +/* Build Hardware Error Source Table */ >> +void acpi_build_hest(GArray *table_data, GArray *hardware_errors, > ^^^^^^^^ it seems to be unused, so why it's here? Thanks, I will remove this parameter. > >> + BIOSLinker *linker) >> +{ >> + uint64_t hest_start = table_data->len; >> + >> + /* Hardware Error Source Table header*/ >> + acpi_data_push(table_data, sizeof(AcpiTableHeader)); >> + >> + /* Error Source Count */ >> + build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4); >> + >> + build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker); >> + >> + build_header(linker, table_data, (void *)(table_data->data + hest_start), >> + "HEST", table_data->len - hest_start, 1, NULL, ""); >> +} >> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >> index 6819fcf..837bbf9 100644 >> --- a/hw/arm/virt-acpi-build.c >> +++ b/hw/arm/virt-acpi-build.c >> @@ -834,6 +834,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >> if (vms->ras) { >> acpi_add_table(table_offsets, tables_blob); >> build_ghes_error_table(tables->hardwarerrors, tables->linker); >> + acpi_build_hest(tables_blob, tables->hardware_errors, >> + tables->linker); > > not aligned properly > > you can use ./scripts/checkpatch.pl to see if there is style errors It will not report style errors for this alignment, anyway I will do alignment to it. > > >> } >> >> if (ms->numa_state->num_nodes > 0) { >> diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h >> index 3dbda3f..09a7f86 100644 >> --- a/include/hw/acpi/ghes.h >> +++ b/include/hw/acpi/ghes.h >> @@ -22,5 +22,45 @@ >> #ifndef ACPI_GHES_H >> #define ACPI_GHES_H >> >> +/* >> + * Values for Hardware Error Notification Type field >> + */ >> +enum AcpiGhesNotifyType { >> + /* Polled */ >> + ACPI_GHES_NOTIFY_POLLED = 0, >> + /* External Interrupt */ >> + ACPI_GHES_NOTIFY_EXTERNAL = 1, >> + /* Local Interrupt */ >> + ACPI_GHES_NOTIFY_LOCAL = 2, >> + /* SCI */ >> + ACPI_GHES_NOTIFY_SCI = 3, >> + /* NMI */ >> + ACPI_GHES_NOTIFY_NMI = 4, >> + /* CMCI, ACPI 5.0: 18.3.2.7, Table 18-290 */ >> + ACPI_GHES_NOTIFY_CMCI = 5, >> + /* MCE, ACPI 5.0: 18.3.2.7, Table 18-290 */ >> + ACPI_GHES_NOTIFY_MCE = 6, >> + /* GPIO-Signal, ACPI 6.0: 18.3.2.7, Table 18-332 */ >> + ACPI_GHES_NOTIFY_GPIO = 7, >> + /* ARMv8 SEA, ACPI 6.1: 18.3.2.9, Table 18-345 */ >> + ACPI_GHES_NOTIFY_SEA = 8, >> + /* ARMv8 SEI, ACPI 6.1: 18.3.2.9, Table 18-345 */ >> + ACPI_GHES_NOTIFY_SEI = 9, >> + /* External Interrupt - GSIV, ACPI 6.1: 18.3.2.9, Table 18-345 */ >> + ACPI_GHES_NOTIFY_GSIV = 10, >> + /* Software Delegated Exception, ACPI 6.2: 18.3.2.9, Table 18-383 */ >> + ACPI_GHES_NOTIFY_SDEI = 11, >> + /* 12 and greater are reserved */ >> + ACPI_GHES_NOTIFY_RESERVED = 12 >> +}; >> + >> +enum { >> + ACPI_HEST_SRC_ID_SEA = 0, >> + /* future ids go here */ >> + ACPI_HEST_SRC_ID_RESERVED, >> +}; >> + >> void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker); >> +void acpi_build_hest(GArray *table_data, GArray *hardware_error, >> + BIOSLinker *linker); >> #endif > > . >
On Wed, 8 Jan 2020 19:32:18 +0800 Dongjiu Geng <gengdongjiu@huawei.com> wrote: > This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. > Now it only supports ARMv8 SEA, a type of Generic Hardware Error > Source version 2(GHESv2) error source. Afterwards, we can extend > the supported types if needed. For the CPER section, currently it > is memory section because kernel mainly wants userspace to handle > the memory errors. > > This patch follows the spec ACPI 6.2 to build the Hardware Error > Source table. For more detailed information, please refer to > document: docs/specs/acpi_hest_ghes.rst > > build_append_ghes_notify() will help to add Hardware Error Notification > to ACPI tables without using packed C structures and avoid endianness > issues as API doesn't need explicit conversion. > > Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> > Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Hi. I was forwards porting my old series adding CCIX error injection support and came across a place this could 'possibly' be improved. I say possibly because it's really about enabling more flexibility in how this code is reused than actually 'fixing' anything here. If you don't make the change here, I'll just add a precursor patch to my series. Just seems nice to tidy it up at source. The rest of the parts of this series I am using seems to work great. Thanks! Jonathan > --- > hw/acpi/ghes.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++- > hw/arm/virt-acpi-build.c | 2 + > include/hw/acpi/ghes.h | 40 ++++++++++++++++ > 3 files changed, 159 insertions(+), 1 deletion(-) > > diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c > index b7fdbbb..9d37798 100644 > --- a/hw/acpi/ghes.c > +++ b/hw/acpi/ghes.c > @@ -34,9 +34,42 @@ > + ... > +/* Build Generic Hardware Error Source version 2 (GHESv2) */ > +static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker) This function takes source ID, which uses the enum of all sources registered. However, it doesn't use it to locate the actual physical addresses. Currently the code effectively assumes the value is 0. > +{ > + uint64_t address_offset; > + /* > + * Type: > + * Generic Hardware Error Source version 2(GHESv2 - Type 10) > + */ > + build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2); > + /* Source Id */ > + build_append_int_noprefix(table_data, source_id, 2); > + /* Related Source Id */ > + build_append_int_noprefix(table_data, 0xffff, 2); > + /* Flags */ > + build_append_int_noprefix(table_data, 0, 1); > + /* Enabled */ > + build_append_int_noprefix(table_data, 1, 1); > + > + /* Number of Records To Pre-allocate */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max Sections Per Record */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max Raw Data Length */ > + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); > + > + address_offset = table_data->len; > + /* Error Status Address */ > + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, > + 4 /* QWord access */, 0); > + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, > + address_offset + GAS_ADDR_OFFSET, > + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); The offset here would need to be source_id * sizeof(uint64_t) I think > + > + /* > + * Notification Structure > + * Now only enable ARMv8 SEA notification type > + */ > + build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA); Perhaps a switch for this to allow for other options later. switch (source_id) { case ACPI_HEST_SRC_ID_SEA: ... break; default: //print some error message. } > + > + /* Error Status Block Length */ > + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); > + > + /* > + * Read Ack Register > + * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source > + * version 2 (GHESv2 - Type 10) > + */ > + address_offset = table_data->len; > + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, > + 4 /* QWord access */, 0); > + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, > + address_offset + GAS_ADDR_OFFSET, > + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, > + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t)); Offset of (ACPI_GHES_ERROR_SOURCE_COUNT + source_id) * sizeof(uint64_t) > + > + /* > + * Read Ack Preserve > + * We only provide the first bit in Read Ack Register to OSPM to write > + * while the other bits are preserved. > + */ > + build_append_int_noprefix(table_data, ~0x1ULL, 8); > + /* Read Ack Write */ > + build_append_int_noprefix(table_data, 0x1, 8); > +}
On 2020/2/6 0:43, Jonathan Cameron wrote: > On Wed, 8 Jan 2020 19:32:18 +0800 > Dongjiu Geng <gengdongjiu@huawei.com> wrote: > >> This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. >> Now it only supports ARMv8 SEA, a type of Generic Hardware Error >> Source version 2(GHESv2) error source. Afterwards, we can extend >> the supported types if needed. For the CPER section, currently it >> is memory section because kernel mainly wants userspace to handle >> the memory errors. >> >> This patch follows the spec ACPI 6.2 to build the Hardware Error >> Source table. For more detailed information, please refer to >> document: docs/specs/acpi_hest_ghes.rst >> >> build_append_ghes_notify() will help to add Hardware Error Notification >> to ACPI tables without using packed C structures and avoid endianness >> issues as API doesn't need explicit conversion. >> >> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> >> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> >> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> >> Acked-by: Xiang Zheng <zhengxiang9@huawei.com> > > Hi. > > I was forwards porting my old series adding CCIX error injection support > and came across a place this could 'possibly' be improved. Jonathan, It is great that you add CCIX error injection support based on this series. thanks for using it. > > I say possibly because it's really about enabling more flexibility > in how this code is reused than actually 'fixing' anything here. > > If you don't make the change here, I'll just add a precursor patch to my > series. Just seems nice to tidy it up at source. sure, I make a change to make your patch work well. > > The rest of the partMake your patch very good work.s of this series I am using seems to work great. > > Thanks! > > Jonathan > >> --- >> hw/acpi/ghes.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++- >> hw/arm/virt-acpi-build.c | 2 + >> include/hw/acpi/ghes.h | 40 ++++++++++++++++ >> 3 files changed, 159 insertions(+), 1 deletion(-) >> >> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c >> index b7fdbbb..9d37798 100644 >> --- a/hw/acpi/ghes.c >> +++ b/hw/acpi/ghes.c >> @@ -34,9 +34,42 @@ >> + > ... >> +/* Build Generic Hardware Error Source version 2 (GHESv2) */ >> +static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker) > This function takes source ID, which uses the enum of all sources registered. > However, it doesn't use it to locate the actual physical addresses. > > Currently the code effectively assumes the value is 0. yes, because there is only one source, so the value is 0. > >> +{ >> + uint64_t address_offset; >> + /* >> + * Type: >> + * Generic Hardware Error Source version 2(GHESv2 - Type 10) >> + */ >> + build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2); >> + /* Source Id */ >> + build_append_int_noprefix(table_data, source_id, 2); >> + /* Related Source Id */ >> + build_append_int_noprefix(table_data, 0xffff, 2); >> + /* Flags */ >> + build_append_int_noprefix(table_data, 0, 1); >> + /* Enabled */ >> + build_append_int_noprefix(table_data, 1, 1); >> + >> + /* Number of Records To Pre-allocate */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max Sections Per Record */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max Raw Data Length */ >> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); >> + >> + address_offset = table_data->len; >> + /* Error Status Address */ >> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, >> + 4 /* QWord access */, 0); >> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, >> + address_offset + GAS_ADDR_OFFSET, >> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); > > The offset here would need to be source_id * sizeof(uint64_t) I think > >> + >> + /* >> + * Notification Structure >> + * Now only enable ARMv8 SEA notification type >> + */ >> + build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA); > Perhaps a switch for this to allow for other options later. OK, I will make this change in order to easily support more hardware error source. > > switch (source_id) { > case ACPI_HEST_SRC_ID_SEA: > ... > break; > default: > //print some error message. > > } ok >> + >> + /* Error Status Block Length */ >> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); >> + >> + /* >> + * Read Ack Register >> + * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source >> + * version 2 (GHESv2 - Type 10) >> + */ >> + address_offset = table_data->len; >> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, >> + 4 /* QWord access */, 0); >> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, >> + address_offset + GAS_ADDR_OFFSET, >> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, >> + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t)); > > Offset of (ACPI_GHES_ERROR_SOURCE_COUNT + source_id) * sizeof(uint64_t) yes, It due to I only support one source, the source_id is zero and not use it. In order to easily extend, I will add this change. > >> + >> + /* >> + * Read Ack Preserve >> + * We only provide the first bit in Read Ack Register to OSPM to write >> + * while the other bits are preserved. >> + */ >> + build_append_int_noprefix(table_data, ~0x1ULL, 8); >> + /* Read Ack Write */ >> + build_append_int_noprefix(table_data, 0x1, 8); >> +} > > > > . >
diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c index b7fdbbb..9d37798 100644 --- a/hw/acpi/ghes.c +++ b/hw/acpi/ghes.c @@ -34,9 +34,42 @@ /* The max size in bytes for one error block */ #define ACPI_GHES_MAX_RAW_DATA_LENGTH 0x400 - /* Now only support ARMv8 SEA notification type error source */ #define ACPI_GHES_ERROR_SOURCE_COUNT 1 +/* Generic Hardware Error Source version 2 */ +#define ACPI_GHES_SOURCE_GENERIC_ERROR_V2 10 +/* Address offset in Generic Address Structure(GAS) */ +#define GAS_ADDR_OFFSET 4 + +/* + * Hardware Error Notification + * ACPI 4.0: 17.3.2.7 Hardware Error Notification + * Composes dummy Hardware Error Notification descriptor of specified type + */ +static void build_ghes_hw_error_notification(GArray *table, const uint8_t type) +{ + /* Type */ + build_append_int_noprefix(table, type, 1); + /* + * Length: + * Total length of the structure in bytes + */ + build_append_int_noprefix(table, 28, 1); + /* Configuration Write Enable */ + build_append_int_noprefix(table, 0, 2); + /* Poll Interval */ + build_append_int_noprefix(table, 0, 4); + /* Vector */ + build_append_int_noprefix(table, 0, 4); + /* Switch To Polling Threshold Value */ + build_append_int_noprefix(table, 0, 4); + /* Switch To Polling Threshold Window */ + build_append_int_noprefix(table, 0, 4); + /* Error Threshold Value */ + build_append_int_noprefix(table, 0, 4); + /* Error Threshold Window */ + build_append_int_noprefix(table, 0, 4); +} /* * Build table for the hardware error fw_cfg blob. @@ -92,3 +125,86 @@ void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker) bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, 0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); } + +/* Build Generic Hardware Error Source version 2 (GHESv2) */ +static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker) +{ + uint64_t address_offset; + /* + * Type: + * Generic Hardware Error Source version 2(GHESv2 - Type 10) + */ + build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2); + /* Source Id */ + build_append_int_noprefix(table_data, source_id, 2); + /* Related Source Id */ + build_append_int_noprefix(table_data, 0xffff, 2); + /* Flags */ + build_append_int_noprefix(table_data, 0, 1); + /* Enabled */ + build_append_int_noprefix(table_data, 1, 1); + + /* Number of Records To Pre-allocate */ + build_append_int_noprefix(table_data, 1, 4); + /* Max Sections Per Record */ + build_append_int_noprefix(table_data, 1, 4); + /* Max Raw Data Length */ + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); + + address_offset = table_data->len; + /* Error Status Address */ + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, + 4 /* QWord access */, 0); + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, + address_offset + GAS_ADDR_OFFSET, + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); + + /* + * Notification Structure + * Now only enable ARMv8 SEA notification type + */ + build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA); + + /* Error Status Block Length */ + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); + + /* + * Read Ack Register + * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source + * version 2 (GHESv2 - Type 10) + */ + address_offset = table_data->len; + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, + 4 /* QWord access */, 0); + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, + address_offset + GAS_ADDR_OFFSET, + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t)); + + /* + * Read Ack Preserve + * We only provide the first bit in Read Ack Register to OSPM to write + * while the other bits are preserved. + */ + build_append_int_noprefix(table_data, ~0x1ULL, 8); + /* Read Ack Write */ + build_append_int_noprefix(table_data, 0x1, 8); +} + +/* Build Hardware Error Source Table */ +void acpi_build_hest(GArray *table_data, GArray *hardware_errors, + BIOSLinker *linker) +{ + uint64_t hest_start = table_data->len; + + /* Hardware Error Source Table header*/ + acpi_data_push(table_data, sizeof(AcpiTableHeader)); + + /* Error Source Count */ + build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4); + + build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker); + + build_header(linker, table_data, (void *)(table_data->data + hest_start), + "HEST", table_data->len - hest_start, 1, NULL, ""); +} diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index 6819fcf..837bbf9 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -834,6 +834,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) if (vms->ras) { acpi_add_table(table_offsets, tables_blob); build_ghes_error_table(tables->hardware_errors, tables->linker); + acpi_build_hest(tables_blob, tables->hardware_errors, + tables->linker); } if (ms->numa_state->num_nodes > 0) { diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h index 3dbda3f..09a7f86 100644 --- a/include/hw/acpi/ghes.h +++ b/include/hw/acpi/ghes.h @@ -22,5 +22,45 @@ #ifndef ACPI_GHES_H #define ACPI_GHES_H +/* + * Values for Hardware Error Notification Type field + */ +enum AcpiGhesNotifyType { + /* Polled */ + ACPI_GHES_NOTIFY_POLLED = 0, + /* External Interrupt */ + ACPI_GHES_NOTIFY_EXTERNAL = 1, + /* Local Interrupt */ + ACPI_GHES_NOTIFY_LOCAL = 2, + /* SCI */ + ACPI_GHES_NOTIFY_SCI = 3, + /* NMI */ + ACPI_GHES_NOTIFY_NMI = 4, + /* CMCI, ACPI 5.0: 18.3.2.7, Table 18-290 */ + ACPI_GHES_NOTIFY_CMCI = 5, + /* MCE, ACPI 5.0: 18.3.2.7, Table 18-290 */ + ACPI_GHES_NOTIFY_MCE = 6, + /* GPIO-Signal, ACPI 6.0: 18.3.2.7, Table 18-332 */ + ACPI_GHES_NOTIFY_GPIO = 7, + /* ARMv8 SEA, ACPI 6.1: 18.3.2.9, Table 18-345 */ + ACPI_GHES_NOTIFY_SEA = 8, + /* ARMv8 SEI, ACPI 6.1: 18.3.2.9, Table 18-345 */ + ACPI_GHES_NOTIFY_SEI = 9, + /* External Interrupt - GSIV, ACPI 6.1: 18.3.2.9, Table 18-345 */ + ACPI_GHES_NOTIFY_GSIV = 10, + /* Software Delegated Exception, ACPI 6.2: 18.3.2.9, Table 18-383 */ + ACPI_GHES_NOTIFY_SDEI = 11, + /* 12 and greater are reserved */ + ACPI_GHES_NOTIFY_RESERVED = 12 +}; + +enum { + ACPI_HEST_SRC_ID_SEA = 0, + /* future ids go here */ + ACPI_HEST_SRC_ID_RESERVED, +}; + void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker); +void acpi_build_hest(GArray *table_data, GArray *hardware_error, + BIOSLinker *linker); #endif