mbox series

[4.19.y-cip,00/35] Renesas RZ/G2 extend peripheral support

Message ID 1580935141-1173-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
Headers show
Series Renesas RZ/G2 extend peripheral support | expand

Message

Lad Prabhakar Feb. 5, 2020, 8:38 p.m. UTC 
This patch series adds supports for following peripherals supported by RZ/G2N
a] CAN and CANFD
b] IPMMU/FCPF/FCPV/VSP
c] USB
d] DU/LVDS/HDMI/FDP1/PWM

This patch series is based on top of series [1] all the patches 
in this series are cherry-picked from upstream.

[1] https://patchwork.kernel.org/project/cip-dev/list/?series=235707&submitter=&state=*&q=&archive=both&delegate=

Biju Das (21):
  dt-bindings: iommu: ipmmu-vmsa: Add r8a774b1 support
  iommu/ipmmu-vmsa: Hook up r8a774b1 DT matching code
  arm64: dts: renesas: r8a774b1: Add IPMMU device nodes
  arm64: dts: renesas: r8a774b1: Add FCPF and FCPV instances
  arm64: dts: renesas: r8a774b1: Add VSP instances
  arm64: dts: renesas: r8a774b1: Tie SYS-DMAC to IPMMU-DS0/1
  arm64: dts: renesas: r8a774b1: Connect Ethernet-AVB to IPMMU-DS0
  arm64: dts: renesas: hihope-common: Move du clk properties out of
    common dtsi
  drm: rcar-du: Add R8A774B1 support
  arm64: dts: renesas: r8a774b1: Add DU device to DT
  arm64: dts: renesas: r8a774b1: Add HDMI encoder instance
  arm64: dts: renesas: r8a774b1-hihope-rzg2n: Add display clock
    properties
  arm64: dts: renesas: r8a774b1: Add FDP1 device nodes
  arm64: dts: renesas: r8a774b1: Add PWM device nodes
  arm64: dts: renesas: hihope-rzg2-ex: Enable backlight
  drm: rcar-du: lvds: Add r8a774b1 support
  arm64: dts: renesas: hihope-rzg2-ex: Add LVDS support
  arm64: dts: renesas: Add support for Advantech idk-1110wr LVDS panel
  arm64: dts: renesas: r8a774a1: Remove audio port node
  ASoC: rsnd: Document r8a774b1 bindings
  arm64: dts: renesas: r8a774b1: Add Sound and Audio DMAC device nodes

Fabrizio Castro (12):
  dt-bindings: can: rcar_can: document r8a774b1 support
  dt-bindings: can: rcar_canfd: document r8a774b1 support
  arm64: dts: renesas: r8a774b1: Add CAN and CAN FD support
  dt-bindings: rcar-gen3-phy-usb2: Add r8a774b1 support
  dt-bindings: dmaengine: usb-dmac: Add binding for r8a774b1
  dt-bindings: usb: renesas_usbhs: Add r8a774b1 support
  dt-bindings: rcar-gen3-phy-usb3: Add r8a774b1 support
  dt-bindings: usb-xhci: Add r8a774b1 support
  dt-bindings: usb: renesas_usb3: Document r8a774b1 support
  arm64: dts: renesas: r8a774b1: Add USB2.0 phy and host (EHCI/OHCI)
    device nodes
  arm64: dts: renesas: r8a774b1: Add USB-DMAC and HSUSB device nodes
  arm64: dts: renesas: r8a774b1: Add USB3.0 device nodes

Simon Horman (2):
  dt-bindings: usb: renesas_usbhs: Rename bindings documentation file
  dt-bindings: usb: renesas_gen3: Rename bindings documentation file to
    reflect IP block

 .../devicetree/bindings/dma/renesas,usb-dmac.txt   |   1 +
 .../bindings/iommu/renesas,ipmmu-vmsa.txt          |   1 +
 .../devicetree/bindings/net/can/rcar_can.txt       |   3 +-
 .../devicetree/bindings/net/can/rcar_canfd.txt     |   7 +-
 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |   2 +
 .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt |   2 +
 .../devicetree/bindings/sound/renesas,rsnd.txt     |   1 +
 .../devicetree/bindings/usb/renesas,usb3-peri.txt  |  41 +
 .../devicetree/bindings/usb/renesas,usbhs.txt      |  53 ++
 .../devicetree/bindings/usb/renesas_usb3.txt       |  40 -
 .../devicetree/bindings/usb/renesas_usbhs.txt      |  52 --
 Documentation/devicetree/bindings/usb/usb-xhci.txt |   1 +
 arch/arm64/boot/dts/renesas/hihope-common.dtsi     |  28 +-
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi    |  49 ++
 .../boot/dts/renesas/r8a774a1-hihope-rzg2m.dts     |  11 +
 .../boot/dts/renesas/r8a774b1-hihope-rzg2n.dts     |  11 +
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi          | 959 ++++++++++++++++++++-
 .../renesas/rzg2-advantech-idk-1110wr-panel.dtsi   |  41 +
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              |  30 +
 drivers/gpu/drm/rcar-du/rcar_lvds.c                |   1 +
 drivers/iommu/ipmmu-vmsa.c                         |   5 +
 21 files changed, 1201 insertions(+), 138 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt
 create mode 100644 Documentation/devicetree/bindings/usb/renesas,usbhs.txt
 delete mode 100644 Documentation/devicetree/bindings/usb/renesas_usb3.txt
 delete mode 100644 Documentation/devicetree/bindings/usb/renesas_usbhs.txt
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi

Comments

Pavel Machek Feb. 5, 2020, 10:46 p.m. UTC | #1 
Hi!

Could I ask for unique subjects for the series? I have just
applied/pushed out different "Renesas RZ/G2 extend peripheral support"
series. That... has to be confusing for 

"Renesas RZ/G2: add CAN/VSP/USB/HDMI support" would be better subject
(but you can likely come out with something even better).

Anyway, let me review the patches, there's no need to resent this just
for this.

Best regards,
								Pavel     

On Wed 2020-02-05 20:38:26, Lad Prabhakar wrote:
> This patch series adds supports for following peripherals supported by RZ/G2N
> a] CAN and CANFD
> b] IPMMU/FCPF/FCPV/VSP
> c] USB
> d] DU/LVDS/HDMI/FDP1/PWM
> 
> This patch series is based on top of series [1] all the patches 
> in this series are cherry-picked from upstream.
Lad Prabhakar Feb. 6, 2020, 7:05 a.m. UTC | #2 
Hi Pavel,

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: 05 February 2020 22:46
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>;
> Chris Paterson <Chris.Paterson2@renesas.com>
> Subject: Re: [PATCH 4.19.y-cip 00/35] Renesas RZ/G2 extend peripheral
> support
>
> Hi!
>
> Could I ask for unique subjects for the series? I have just applied/pushed out
> different "Renesas RZ/G2 extend peripheral support"
> series. That... has to be confusing for
>
> "Renesas RZ/G2: add CAN/VSP/USB/HDMI support" would be better subject
> (but you can likely come out with something even better).
>
> Anyway, let me review the patches, there's no need to resent this just for
> this.
>
Sorry about that will keep that in mind.

Cheers,
--Prabhakar

> Best regards,
> Pavel
>
> On Wed 2020-02-05 20:38:26, Lad Prabhakar wrote:
> > This patch series adds supports for following peripherals supported by
> > RZ/G2N a] CAN and CANFD b] IPMMU/FCPF/FCPV/VSP c] USB d]
> > DU/LVDS/HDMI/FDP1/PWM
> >
> > This patch series is based on top of series [1] all the patches in
> > this series are cherry-picked from upstream.
>
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
Pavel Machek Feb. 6, 2020, 10:50 p.m. UTC | #3 
Hi!

> This patch series adds supports for following peripherals supported by RZ/G2N
> a] CAN and CANFD
> b] IPMMU/FCPF/FCPV/VSP
> c] USB
> d] DU/LVDS/HDMI/FDP1/PWM
> 
> This patch series is based on top of series [1] all the patches 
> in this series are cherry-picked from upstream.
> 
> [1] https://patchwork.kernel.org/project/cip-dev/list/?series=235707&submitter=&state=*&q=&archive=both&delegate=
>

Series looks okay to me (I'll have some minor comments later). Tests
seem to pass:

https://gitlab.com/cip-project/cip-kernel/linux-cip/pipelines/115667302

I'll push the series if there are no objections.

Best regards,
								Pavel
Lad Prabhakar Feb. 6, 2020, 10:52 p.m. UTC | #4 
Hi Pavel,

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: 06 February 2020 22:50
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>;
> Chris Paterson <Chris.Paterson2@renesas.com>
> Subject: Re: [PATCH 4.19.y-cip 00/35] Renesas RZ/G2 extend peripheral
> support
>
> Hi!
>
> > This patch series adds supports for following peripherals supported by
> > RZ/G2N a] CAN and CANFD b] IPMMU/FCPF/FCPV/VSP c] USB d]
> > DU/LVDS/HDMI/FDP1/PWM
> >
> > This patch series is based on top of series [1] all the patches in
> > this series are cherry-picked from upstream.
> >
> > [1]
> > https://patchwork.kernel.org/project/cip-dev/list/?series=235707&submi
> > tter=&state=*&q=&archive=both&delegate=
> >
>
> Series looks okay to me (I'll have some minor comments later). Tests seem to
> pass:
>
> https://gitlab.com/cip-project/cip-kernel/linux-cip/pipelines/115667302
>
> I'll push the series if there are no objections.
>
Thank you for the review.

Cheers,
--Prabhakar

> Best regards,
> Pavel
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
Nobuhiro Iwamatsu Feb. 7, 2020, 8:54 a.m. UTC | #5 
Hi all,

> -----Original Message-----
> From: Pavel Machek [mailto:pavel@denx.de]
> Sent: Friday, February 7, 2020 7:50 AM
> To: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋 ○ＳＷ
> Ｃ□ＯＳＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek
> <pavel@denx.de>; Chris Paterson <chris.paterson2@renesas.com>
> Subject: Re: [PATCH 4.19.y-cip 00/35] Renesas RZ/G2 extend peripheral
> support
> 
> Hi!
> 
> > This patch series adds supports for following peripherals supported
> by
> > RZ/G2N a] CAN and CANFD b] IPMMU/FCPF/FCPV/VSP c] USB d]
> > DU/LVDS/HDMI/FDP1/PWM
> >
> > This patch series is based on top of series [1] all the patches in
> > this series are cherry-picked from upstream.
> >
> > [1]
> >
> https://patchwork.kernel.org/project/cip-dev/list/?series=235707&sub
> mi
> > tter=&state=*&q=&archive=both&delegate=
> >
> 
> Series looks okay to me (I'll have some minor comments later). Tests seem
> to pass:
> 
> https://gitlab.com/cip-project/cip-kernel/linux-cip/pipelines/115667
> 302
> 
> I'll push the series if there are no objections.

I checked this series, so looks good to me.

Best regards,
  Nobuhiro
Pavel Machek Feb. 7, 2020, 1:05 p.m. UTC | #6 
Hi!

> > Series looks okay to me (I'll have some minor comments later). Tests seem
> > to pass:
> > 
> > https://gitlab.com/cip-project/cip-kernel/linux-cip/pipelines/115667
> > 302
> > 
> > I'll push the series if there are no objections.
> 
> I checked this series, so looks good to me.

Thank you, applied.

Best regards,
								Pavel