| Message ID | 20200130135040.22575-1-olivier.moysan@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ASoC: dt-bindings: stm32: convert sai to json-schema | expand |
On Thu, Jan 30, 2020 at 02:50:40PM +0100, Olivier Moysan wrote: > Convert the STM32 SAI bindings to DT schema format using json-schema. > > Signed-off-by: Olivier Moysan <olivier.moysan@st.com> > --- > .../bindings/sound/st,stm32-sai.txt | 107 ---------- > .../bindings/sound/st,stm32-sai.yaml | 193 ++++++++++++++++++ > 2 files changed, 193 insertions(+), 107 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt > create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > new file mode 100644 > index 000000000000..33dca007fc86 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > @@ -0,0 +1,193 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STMicroelectronics STM32 Serial Audio Interface (SAI) > + > +maintainers: > + - Olivier Moysan <olivier.moysan@st.com> > + > +description: > + The SAI interface (Serial Audio Interface) offers a wide set of audio > + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. > + The SAI contains two independent audio sub-blocks. Each sub-block has > + its own clock generator and I/O lines controller. > + > +properties: > + compatible: > + enum: > + - st,stm32f4-sai > + - st,stm32h7-sai > + > + reg: > + items: > + - description: Base address and size of SAI common register set. > + - description: Base address and size of SAI identification register set. > + minItems: 1 > + maxItems: 2 > + > + ranges: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 1 > + > + clocks: > + items: > + - description: pclk feeds the peripheral bus interface. > + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. > + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. > + > + clock-names: > + items: > + enum: [ pclk, x8k, x11k ] > + minItems: 3 > + maxItems: 3 > + > +required: > + - compatible > + - reg > + - ranges > + - "#address-cells" > + - "#size-cells" > + - clocks > + - clock-names > + > +patternProperties: > + "^audio-controller@[0-9a-f]+$": > + type: object > + description: > + Two subnodes corresponding to SAI sub-block instances A et B > + can be defined. Subnode can be omitted for unsused sub-block. > + > + properties: > + compatible: > + description: Compatible for SAI sub-block A or B. > + enum: > + - st,stm32-sai-sub-a > + - st,stm32-sai-sub-b pattern: 'st,stm32-sai-sub-[ab]' > + > + "#sound-dai-cells": > + const: 0 > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: sai_ck clock feeding the internal clock generator. > + - description: MCLK clock from a SAI set as master clock provider. > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + items: > + - const: sai_ck > + - const: MCLK > + minItems: 1 > + maxItems: 2 > + > + dmas: > + items: > + - description: SAI sub-block is configured as a capture DAI. > + - description: SAI sub-block is configured as a playback DAI. > + minItems: 1 > + maxItems: 1 This is defining that dmas has 2 entries, but then limits it to the 1st entry only. > + > + dma-names: > + items: > + - enum: [ rx, tx ] > + > + st,sync: > + description: > + Configure the SAI sub-block as slave of another SAI sub-block. > + By default SAI sub-block is in asynchronous mode. > + Must contain the phandle and index of the SAI sub-block providing > + the synchronization. > + allOf: > + - $ref: /schemas/types.yaml#definitions/phandle-array > + - maxItems: 1 > + > + st,iec60958: > + description: > + If set, support S/PDIF IEC6958 protocol for playback. > + IEC60958 protocol is not available for capture. > + By default, custom protocol is assumed, meaning that protocol is > + configured according to protocol defined in related DAI link node, > + such as i2s, left justified, right justified, dsp and pdm protocols. > + allOf: > + - $ref: /schemas/types.yaml#definitions/flag > + > + "#clock-cells": > + description: Configure the SAI device as master clock provider. > + const: 0 > + > + required: > + - compatible > + - "#sound-dai-cells" > + - reg > + - clocks > + - clock-names > + - dmas > + - dma-names additionalProperties: false. > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: st,stm32f4-sai > + > + - then: > + properties: > + clocks: > + minItems: 2 > + maxItems: 2 > + > + clock-names: > + items: > + enum: [ x8k, x11k ] Define the order. > + minItems: 2 > + maxItems: 2 > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/stm32mp1-clks.h> > + #include <dt-bindings/reset/stm32mp1-resets.h> > + sai1: sai@4400a000 { > + compatible = "st,stm32h7-sai"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0x4400a000 0x400>; > + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; > + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>; > + clock-names = "pclk", "x8k", "x11k"; > + resets = <&rcc SAI1_R>; > + > + sai1a: audio-controller@4400a004 { > + compatible = "st,stm32-sai-sub-a"; > + #sound-dai-cells = <0>; > + reg = <0x4 0x1c>; > + clocks = <&rcc SAI1_K>; > + clock-names = "sai_ck"; > + dmas = <&dmamux1 87 0x400 0x01>; > + dma-names = "tx"; > + }; > + }; > + > +... > -- > 2.17.1 >
Hi Rob, On 2/6/20 7:21 PM, Rob Herring wrote: > On Thu, Jan 30, 2020 at 02:50:40PM +0100, Olivier Moysan wrote: >> Convert the STM32 SAI bindings to DT schema format using json-schema. >> >> Signed-off-by: Olivier Moysan <olivier.moysan@st.com> >> --- >> .../bindings/sound/st,stm32-sai.txt | 107 ---------- >> .../bindings/sound/st,stm32-sai.yaml | 193 ++++++++++++++++++ >> 2 files changed, 193 insertions(+), 107 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt >> create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > >> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml >> new file mode 100644 >> index 000000000000..33dca007fc86 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml >> @@ -0,0 +1,193 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: STMicroelectronics STM32 Serial Audio Interface (SAI) >> + >> +maintainers: >> + - Olivier Moysan <olivier.moysan@st.com> >> + >> +description: >> + The SAI interface (Serial Audio Interface) offers a wide set of audio >> + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. >> + The SAI contains two independent audio sub-blocks. Each sub-block has >> + its own clock generator and I/O lines controller. >> + >> +properties: >> + compatible: >> + enum: >> + - st,stm32f4-sai >> + - st,stm32h7-sai >> + >> + reg: >> + items: >> + - description: Base address and size of SAI common register set. >> + - description: Base address and size of SAI identification register set. >> + minItems: 1 >> + maxItems: 2 >> + >> + ranges: >> + maxItems: 1 >> + >> + interrupts: >> + maxItems: 1 >> + >> + resets: >> + maxItems: 1 >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 1 >> + >> + clocks: >> + items: >> + - description: pclk feeds the peripheral bus interface. >> + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. >> + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. >> + >> + clock-names: >> + items: >> + enum: [ pclk, x8k, x11k ] >> + minItems: 3 >> + maxItems: 3 >> + >> +required: >> + - compatible >> + - reg >> + - ranges >> + - "#address-cells" >> + - "#size-cells" >> + - clocks >> + - clock-names >> + >> +patternProperties: >> + "^audio-controller@[0-9a-f]+$": >> + type: object >> + description: >> + Two subnodes corresponding to SAI sub-block instances A et B >> + can be defined. Subnode can be omitted for unsused sub-block. >> + >> + properties: >> + compatible: >> + description: Compatible for SAI sub-block A or B. >> + enum: >> + - st,stm32-sai-sub-a >> + - st,stm32-sai-sub-b > pattern: 'st,stm32-sai-sub-[ab]' I will change this in v2 >> + >> + "#sound-dai-cells": >> + const: 0 >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + items: >> + - description: sai_ck clock feeding the internal clock generator. >> + - description: MCLK clock from a SAI set as master clock provider. >> + minItems: 1 >> + maxItems: 2 >> + >> + clock-names: >> + items: >> + - const: sai_ck >> + - const: MCLK >> + minItems: 1 >> + maxItems: 2 >> + >> + dmas: >> + items: >> + - description: SAI sub-block is configured as a capture DAI. >> + - description: SAI sub-block is configured as a playback DAI. >> + minItems: 1 >> + maxItems: 1 > This is defining that dmas has 2 entries, but then limits it to the 1st > entry only. dma can be either "rx" or "tx", but not both. Maybe, the following syntax is more appropriate: dmas: maxItems: 1 dma-names: description: | rx: SAI sub-block is configured as a capture DAI. tx: SAI sub-block is configured as a playback DAI. items: - enum: [ rx, tx ] >> + >> + dma-names: >> + items: >> + - enum: [ rx, tx ] >> + >> + st,sync: >> + description: >> + Configure the SAI sub-block as slave of another SAI sub-block. >> + By default SAI sub-block is in asynchronous mode. >> + Must contain the phandle and index of the SAI sub-block providing >> + the synchronization. >> + allOf: >> + - $ref: /schemas/types.yaml#definitions/phandle-array >> + - maxItems: 1 >> + >> + st,iec60958: >> + description: >> + If set, support S/PDIF IEC6958 protocol for playback. >> + IEC60958 protocol is not available for capture. >> + By default, custom protocol is assumed, meaning that protocol is >> + configured according to protocol defined in related DAI link node, >> + such as i2s, left justified, right justified, dsp and pdm protocols. >> + allOf: >> + - $ref: /schemas/types.yaml#definitions/flag >> + >> + "#clock-cells": >> + description: Configure the SAI device as master clock provider. >> + const: 0 >> + >> + required: >> + - compatible >> + - "#sound-dai-cells" >> + - reg >> + - clocks >> + - clock-names >> + - dmas >> + - dma-names > additionalProperties: false. > >> + >> +allOf: >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: st,stm32f4-sai >> + >> + - then: >> + properties: >> + clocks: >> + minItems: 2 >> + maxItems: 2 >> + >> + clock-names: >> + items: >> + enum: [ x8k, x11k ] > Define the order. > Do you mean, adding in clocks property : items: - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. But, it seems to me that this is redundant with previous definition of clocks property. Thanks Olivier >> + minItems: 2 >> + maxItems: 2 >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + #include <dt-bindings/clock/stm32mp1-clks.h> >> + #include <dt-bindings/reset/stm32mp1-resets.h> >> + sai1: sai@4400a000 { >> + compatible = "st,stm32h7-sai"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0 0x4400a000 0x400>; >> + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; >> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>; >> + clock-names = "pclk", "x8k", "x11k"; >> + resets = <&rcc SAI1_R>; >> + >> + sai1a: audio-controller@4400a004 { >> + compatible = "st,stm32-sai-sub-a"; >> + #sound-dai-cells = <0>; >> + reg = <0x4 0x1c>; >> + clocks = <&rcc SAI1_K>; >> + clock-names = "sai_ck"; >> + dmas = <&dmamux1 87 0x400 0x01>; >> + dma-names = "tx"; >> + }; >> + }; >> + >> +... >> -- >> 2.17.1 >>
On Fri, Feb 7, 2020 at 7:42 AM Olivier MOYSAN <olivier.moysan@st.com> wrote: > > Hi Rob, > > On 2/6/20 7:21 PM, Rob Herring wrote: > > On Thu, Jan 30, 2020 at 02:50:40PM +0100, Olivier Moysan wrote: > >> Convert the STM32 SAI bindings to DT schema format using json-schema. > >> > >> Signed-off-by: Olivier Moysan <olivier.moysan@st.com> > >> --- > >> .../bindings/sound/st,stm32-sai.txt | 107 ---------- > >> .../bindings/sound/st,stm32-sai.yaml | 193 ++++++++++++++++++ > >> 2 files changed, 193 insertions(+), 107 deletions(-) > >> delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt > >> create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > > > >> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > >> new file mode 100644 > >> index 000000000000..33dca007fc86 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > >> @@ -0,0 +1,193 @@ > >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: STMicroelectronics STM32 Serial Audio Interface (SAI) > >> + > >> +maintainers: > >> + - Olivier Moysan <olivier.moysan@st.com> > >> + > >> +description: > >> + The SAI interface (Serial Audio Interface) offers a wide set of audio > >> + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. > >> + The SAI contains two independent audio sub-blocks. Each sub-block has > >> + its own clock generator and I/O lines controller. > >> + > >> +properties: > >> + compatible: > >> + enum: > >> + - st,stm32f4-sai > >> + - st,stm32h7-sai > >> + > >> + reg: > >> + items: > >> + - description: Base address and size of SAI common register set. > >> + - description: Base address and size of SAI identification register set. > >> + minItems: 1 > >> + maxItems: 2 > >> + > >> + ranges: > >> + maxItems: 1 > >> + > >> + interrupts: > >> + maxItems: 1 > >> + > >> + resets: > >> + maxItems: 1 > >> + > >> + "#address-cells": > >> + const: 1 > >> + > >> + "#size-cells": > >> + const: 1 > >> + > >> + clocks: > >> + items: > >> + - description: pclk feeds the peripheral bus interface. > >> + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. > >> + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. > >> + > >> + clock-names: > >> + items: > >> + enum: [ pclk, x8k, x11k ] > >> + minItems: 3 > >> + maxItems: 3 > >> + > >> +required: > >> + - compatible > >> + - reg > >> + - ranges > >> + - "#address-cells" > >> + - "#size-cells" > >> + - clocks > >> + - clock-names > >> + > >> +patternProperties: > >> + "^audio-controller@[0-9a-f]+$": > >> + type: object > >> + description: > >> + Two subnodes corresponding to SAI sub-block instances A et B > >> + can be defined. Subnode can be omitted for unsused sub-block. > >> + > >> + properties: > >> + compatible: > >> + description: Compatible for SAI sub-block A or B. > >> + enum: > >> + - st,stm32-sai-sub-a > >> + - st,stm32-sai-sub-b > > pattern: 'st,stm32-sai-sub-[ab]' > I will change this in v2 > >> + > >> + "#sound-dai-cells": > >> + const: 0 > >> + > >> + reg: > >> + maxItems: 1 > >> + > >> + clocks: > >> + items: > >> + - description: sai_ck clock feeding the internal clock generator. > >> + - description: MCLK clock from a SAI set as master clock provider. > >> + minItems: 1 > >> + maxItems: 2 > >> + > >> + clock-names: > >> + items: > >> + - const: sai_ck > >> + - const: MCLK > >> + minItems: 1 > >> + maxItems: 2 > >> + > >> + dmas: > >> + items: > >> + - description: SAI sub-block is configured as a capture DAI. > >> + - description: SAI sub-block is configured as a playback DAI. > >> + minItems: 1 > >> + maxItems: 1 > > This is defining that dmas has 2 entries, but then limits it to the 1st > > entry only. > dma can be either "rx" or "tx", but not both. > Maybe, the following syntax is more appropriate: > > dmas: > maxItems: 1 > > dma-names: > description: | > rx: SAI sub-block is configured as a capture DAI. > tx: SAI sub-block is configured as a playback DAI. > items: > - enum: [ rx, tx ] Yes, but for a single entry you can drop 'items'. > > >> + > >> + dma-names: > >> + items: > >> + - enum: [ rx, tx ] > >> + > >> + st,sync: > >> + description: > >> + Configure the SAI sub-block as slave of another SAI sub-block. > >> + By default SAI sub-block is in asynchronous mode. > >> + Must contain the phandle and index of the SAI sub-block providing > >> + the synchronization. > >> + allOf: > >> + - $ref: /schemas/types.yaml#definitions/phandle-array > >> + - maxItems: 1 > >> + > >> + st,iec60958: > >> + description: > >> + If set, support S/PDIF IEC6958 protocol for playback. > >> + IEC60958 protocol is not available for capture. > >> + By default, custom protocol is assumed, meaning that protocol is > >> + configured according to protocol defined in related DAI link node, > >> + such as i2s, left justified, right justified, dsp and pdm protocols. > >> + allOf: > >> + - $ref: /schemas/types.yaml#definitions/flag > >> + > >> + "#clock-cells": > >> + description: Configure the SAI device as master clock provider. > >> + const: 0 > >> + > >> + required: > >> + - compatible > >> + - "#sound-dai-cells" > >> + - reg > >> + - clocks > >> + - clock-names > >> + - dmas > >> + - dma-names > > additionalProperties: false. > > > >> + > >> +allOf: > >> + - if: > >> + properties: > >> + compatible: > >> + contains: > >> + const: st,stm32f4-sai > >> + > >> + - then: > >> + properties: > >> + clocks: > >> + minItems: 2 > >> + maxItems: 2 > >> + > >> + clock-names: > >> + items: > >> + enum: [ x8k, x11k ] > > Define the order. > > > Do you mean, adding in clocks property : > items: > - description: x8k, SAI parent clock for sampling rates > multiple of 8kHz. > - description: x11k, SAI parent clock for sampling rates > multiple of 11.025kHz. That too, but for clocks you need: clock-names: items: - const: x8k - const: x11k > But, it seems to me that this is redundant with previous definition of > clocks property. It's not because it's clocks in different positions. Rob
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt deleted file mode 100644 index 944743dd9212..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ /dev/null @@ -1,107 +0,0 @@ -STMicroelectronics STM32 Serial Audio Interface (SAI). - -The SAI interface (Serial Audio Interface) offers a wide set of audio protocols -as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. -The SAI contains two independent audio sub-blocks. Each sub-block has -its own clock generator and I/O lines controller. - -Required properties: - - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai" - - reg: Base address and size of SAI common register set. - - clocks: Must contain phandle and clock specifier pairs for each entry - in clock-names. - - clock-names: Must contain "pclk" "x8k" and "x11k" - "pclk": Clock which feeds the peripheral bus interface. - Mandatory for "st,stm32h7-sai" compatible. - Not used for "st,stm32f4-sai" compatible. - "x8k": SAI parent clock for sampling rates multiple of 8kHz. - "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - - interrupts: cpu DAI interrupt line shared by SAI sub-blocks - -Optional properties: - - resets: Reference to a reset controller asserting the SAI - -SAI subnodes: -Two subnodes corresponding to SAI sub-block instances A et B can be defined. -Subnode can be omitted for unsused sub-block. - -SAI subnodes required properties: - - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b" - for SAI sub-block A or B respectively. - - reg: Base address and size of SAI sub-block register set. - - clocks: Must contain one phandle and clock specifier pair - for sai_ck which feeds the internal clock generator. - If the SAI shares a master clock, with another SAI set as MCLK - clock provider, SAI provider phandle must be specified here. - - clock-names: Must contain "sai_ck". - Must also contain "MCLK", if SAI shares a master clock, - with a SAI set as MCLK clock provider. - - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt - - dma-names: identifier string for each DMA request line - "tx": if sai sub-block is configured as playback DAI - "rx": if sai sub-block is configured as capture DAI - - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml - -SAI subnodes Optional properties: - - st,sync: specify synchronization mode. - By default SAI sub-block is in asynchronous mode. - This property sets SAI sub-block as slave of another SAI sub-block. - Must contain the phandle and index of the sai sub-block providing - the synchronization. - - st,iec60958: support S/PDIF IEC6958 protocol for playback - IEC60958 protocol is not available for capture. - By default, custom protocol is assumed, meaning that protocol is - configured according to protocol defined in related DAI link node, - such as i2s, left justified, right justified, dsp and pdm protocols. - Note: ac97 protocol is not supported by SAI driver - - #clock-cells: should be 0. This property must be present if the SAI device - is a master clock provider, according to clocks bindings, described in - Documentation/devicetree/bindings/clock/clock-bindings.txt. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -sound_card { - compatible = "audio-graph-card"; - dais = <&sai1b_port>; -}; - -sai1: sai1@40015800 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x40015800 0x400>; - reg = <0x40015800 0x4>; - clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "pclk", "x8k", "x11k"; - interrupts = <87>; - - sai1a: audio-controller@40015804 { - compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1C>; - clocks = <&rcc SAI1_CK>; - clock-names = "sai_ck"; - dmas = <&dmamux1 1 87 0x400 0x0>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1a>; - - sai1b_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - format = "i2s"; - }; - }; - }; -}; - -audio-codec { - codec_port: port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml new file mode 100644 index 000000000000..33dca007fc86 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Serial Audio Interface (SAI) + +maintainers: + - Olivier Moysan <olivier.moysan@st.com> + +description: + The SAI interface (Serial Audio Interface) offers a wide set of audio + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. + The SAI contains two independent audio sub-blocks. Each sub-block has + its own clock generator and I/O lines controller. + +properties: + compatible: + enum: + - st,stm32f4-sai + - st,stm32h7-sai + + reg: + items: + - description: Base address and size of SAI common register set. + - description: Base address and size of SAI identification register set. + minItems: 1 + maxItems: 2 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + clocks: + items: + - description: pclk feeds the peripheral bus interface. + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + enum: [ pclk, x8k, x11k ] + minItems: 3 + maxItems: 3 + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + +patternProperties: + "^audio-controller@[0-9a-f]+$": + type: object + description: + Two subnodes corresponding to SAI sub-block instances A et B + can be defined. Subnode can be omitted for unsused sub-block. + + properties: + compatible: + description: Compatible for SAI sub-block A or B. + enum: + - st,stm32-sai-sub-a + - st,stm32-sai-sub-b + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + items: + - description: sai_ck clock feeding the internal clock generator. + - description: MCLK clock from a SAI set as master clock provider. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: sai_ck + - const: MCLK + minItems: 1 + maxItems: 2 + + dmas: + items: + - description: SAI sub-block is configured as a capture DAI. + - description: SAI sub-block is configured as a playback DAI. + minItems: 1 + maxItems: 1 + + dma-names: + items: + - enum: [ rx, tx ] + + st,sync: + description: + Configure the SAI sub-block as slave of another SAI sub-block. + By default SAI sub-block is in asynchronous mode. + Must contain the phandle and index of the SAI sub-block providing + the synchronization. + allOf: + - $ref: /schemas/types.yaml#definitions/phandle-array + - maxItems: 1 + + st,iec60958: + description: + If set, support S/PDIF IEC6958 protocol for playback. + IEC60958 protocol is not available for capture. + By default, custom protocol is assumed, meaning that protocol is + configured according to protocol defined in related DAI link node, + such as i2s, left justified, right justified, dsp and pdm protocols. + allOf: + - $ref: /schemas/types.yaml#definitions/flag + + "#clock-cells": + description: Configure the SAI device as master clock provider. + const: 0 + + required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-sai + + - then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + enum: [ x8k, x11k ] + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "x8k", "x11k"; + resets = <&rcc SAI1_R>; + + sai1a: audio-controller@4400a004 { + compatible = "st,stm32-sai-sub-a"; + #sound-dai-cells = <0>; + reg = <0x4 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + dma-names = "tx"; + }; + }; + +...
Convert the STM32 SAI bindings to DT schema format using json-schema. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> --- .../bindings/sound/st,stm32-sai.txt | 107 ---------- .../bindings/sound/st,stm32-sai.yaml | 193 ++++++++++++++++++ 2 files changed, 193 insertions(+), 107 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml