diff mbox series

[v7,2/2] fpga: dfl: fme: add performance reporting support

Message ID 1581306469-22629-3-git-send-email-hao.wu@intel.com (mailing list archive)
State Superseded, archived
Headers show
Series add performance reporting support to FPGA DFL drivers | expand

Commit Message

Wu, Hao Feb. 10, 2020, 3:47 a.m. UTC
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.

e.g. List all events by "perf list"

  perf list | grep fme

  fme0/cache_read_hit/                         [Kernel PMU event]
  fme0/cache_read_miss/                        [Kernel PMU event]
  ...

  fme0/fab_mmio_read/                          [Kernel PMU event]
  fme0/fab_mmio_write/                         [Kernel PMU event]
  ...

  fme0/fab_port_mmio_read,portid=?/            [Kernel PMU event]
  fme0/fab_port_mmio_write,portid=?/           [Kernel PMU event]
  ...

  fme0/vtd_port_devtlb_1g_fill,portid=?/       [Kernel PMU event]
  fme0/vtd_port_devtlb_2m_fill,portid=?/       [Kernel PMU event]
  ...

  fme0/vtd_sip_iotlb_1g_hit/                   [Kernel PMU event]
  fme0/vtd_sip_iotlb_1g_miss/                  [Kernel PMU event]
  ...

  fme0/clock                                   [Kernel PMU event]
  ...

e.g. check increased counter value after run one application using
"perf stat" command.

 perf stat -e fme0/fab_mmio_read/,fme0/fab_mmio_write/ ./test

 Performance counter stats for './test':

                 1      fme0/fab_mmio_read/
                 2      fme0/fab_mmio_write/

       1.009496520 seconds time elapsed

Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:

perf stat -e fme0/fab_mmio_read/,fme0/fab_port_mmio_write,portid=0/

 Performance counter stats for 'system wide':

                 0      fme0/fab_mmio_read/
   <not supported>      fme0/fab_port_mmio_write,portid=0/

       2.141064085 seconds time elapsed

Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
---
v3: replace scnprintf with sprintf in sysfs interfaces.
    update sysfs doc kernel version and date.
    fix sysfs doc issue for fabric counter.
    refine PERF_OBJ_ATTR_* macro, doesn't count on __ATTR anymore.
    introduce PERF_OBJ_ATTR_F_* macro, as it needs to use different
    filenames for some of the sysfs attributes.
    remove kobject_del when destroy kobject, kobject_put is enough.
    do sysfs_remove_groups first when destroying perf_obj.
    WARN_ON_ONCE in case internal parms are wrong in read_*_count().
v4: rework this patch to use standard perf API as user interfaces.
v5: rebase and clean up.
v6: use dev_ext_attribute instead of creating new fme_perf_attribute
    use is_visible function to decide which events to expose per
    hardware capability, and add event_init checking for all events.
v7: fix a kbuild warning and add a sysfs documentation.
---
 .../ABI/testing/sysfs-bus-event_source-devices-fme | 105 +++
 drivers/fpga/Kconfig                               |   2 +-
 drivers/fpga/Makefile                              |   1 +
 drivers/fpga/dfl-fme-main.c                        |   4 +
 drivers/fpga/dfl-fme-perf.c                        | 943 +++++++++++++++++++++
 drivers/fpga/dfl-fme.h                             |   2 +
 drivers/fpga/dfl.h                                 |   2 +
 7 files changed, 1058 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-event_source-devices-fme
 create mode 100644 drivers/fpga/dfl-fme-perf.c

Comments

Will Deacon Feb. 10, 2020, 4:34 p.m. UTC | #1
Hi,

On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> This patch adds support for performance reporting private feature
> for FPGA Management Engine (FME). Now it supports several different
> performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> and 'vtd_sip'. It allows user to use standard linux tools to access
> these performance counters.

I had a quick look at this, and it mostly looks alright to me. Just a few
high-level comments/questions:

  - I would still prefer for the PMU drivers to live under drivers/perf/

  - You should probably give the PMU a better name than "fme%d", for example
    "intel_fpga_dfl_fme%d".

  - CPU0 can be hotplugged off on non-x86 systems. How do you cope with
    that?

  - readq() will emit 2x32-bit reads on some architectures. What happens
    in this case?

Will
Greg Kroah-Hartman Feb. 10, 2020, 8:56 p.m. UTC | #2
On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> +What:		/sys/bus/event_source/devices/fmeX/format
> +Date:		February 2020
> +KernelVersion:  5.7
> +Contact:	Wu Hao <hao.wu@intel.com>
> +Description:	Read-only. Attribute group to describe the magic bits
> +		that go into perf_event_attr.config for a particular pmu.
> +		(See ABI/testing/sysfs-bus-event_source-devices-format).
> +
> +		Each attribute under this group defines a bit range of the
> +		perf_event_attr.config. All supported attributes are listed
> +		below.
> +
> +		  event  = "config:0-11"  - event ID
> +		  evtype = "config:12-15" - event type
> +		  portid = "config:16-23" - event source
> +
> +		For example,
> +
> +		  fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"

Are perf sysfs files always this bad "multiple values per file"?  Or is
that unique to this driver?  If not unique, do you have specific
examples in the kernel that currently do this today?


> +static struct attribute *fme_perf_events_attrs_empty[] = {
> +	NULL,

Huh?

> +};
> +
> +static struct attribute_group fme_perf_events_group = {
> +	.name = "events",
> +	.attrs = fme_perf_events_attrs_empty,

You create an empty directory?  Why?  What goes in here?

very odd...

greg k-h
Wu, Hao Feb. 12, 2020, 2:39 a.m. UTC | #3
On Mon, Feb 10, 2020 at 12:56:18PM -0800, Greg KH wrote:
> On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> > +What:		/sys/bus/event_source/devices/fmeX/format
> > +Date:		February 2020
> > +KernelVersion:  5.7
> > +Contact:	Wu Hao <hao.wu@intel.com>
> > +Description:	Read-only. Attribute group to describe the magic bits
> > +		that go into perf_event_attr.config for a particular pmu.
> > +		(See ABI/testing/sysfs-bus-event_source-devices-format).
> > +
> > +		Each attribute under this group defines a bit range of the
> > +		perf_event_attr.config. All supported attributes are listed
> > +		below.
> > +
> > +		  event  = "config:0-11"  - event ID
> > +		  evtype = "config:12-15" - event type
> > +		  portid = "config:16-23" - event source
> > +
> > +		For example,
> > +
> > +		  fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
> 
> Are perf sysfs files always this bad "multiple values per file"?  Or is
> that unique to this driver?  If not unique, do you have specific
> examples in the kernel that currently do this today?

Hi Greg,

Thanks a lot for the review. : )

Perf sysfs files allow this kind of output, so some perf drivers are using
the similar format for their jobs.

Examples from my machine.

 # cat /sys/bus/event_source/devices/cpu/events/cycles-ct
 event=0x3c,in_tx=1,in_tx_cp=1
 # cat /sys/bus/event_source/devices/cpu/events/el-start
 event=0xc8,umask=0x1
 # cat /sys/bus/event_source/devices/cpu/events/instructions
 event=0xc0
 # cat /sys/bus/event_source/devices/cpu/events/branch-instructions
 event=0xc4

See arch/x86/events/intel/core.c

 EVENT_ATTR_STR(cycles-ct, cycles_ct, "event=0x3c,in_tx=1,in_tx_cp=1");
 ...

And descriptions/examples from ABI/testing/sysfs-bus-event_source-devices-events

What: /sys/bus/event_source/devices/<pmu>/events/<event>
Date: 2014/02/24
Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description:	Per-pmu performance monitoring events specific to the running system

		Each file (except for some of those with a '.' in them, '.unit'
		and '.scale') in the 'events' directory describes a single
		performance monitoring event supported by the <pmu>. The name
		of the file is the name of the event.

		File contents:

			<term>[=<value>][,<term>[=<value>]]...

		Where <term> is one of the terms listed under
		/sys/bus/event_source/devices/<pmu>/format/ and <value> is
		a number is base-16 format with a '0x' prefix (lowercase only).
		If a <term> is specified alone (without an assigned value), it
		is implied that 0x1 is assigned to that <term>.

		Examples (each of these lines would be in a seperate file):

			event=0x2abc
			event=0x423,inv,cmask=0x3
			domain=0x1,offset=0x8,starting_index=0xffff
			domain=0x1,offset=0x8,core=?

		Each of the assignments indicates a value to be assigned to a
		particular set of bits (as defined by the format file
		corresponding to the <term>) in the perf_event structure passed
		to the perf_open syscall.

		In the case of the last example, a value replacing "?" would
		need to be provided by the user selecting the particular event.
		This is referred to as "event parameterization". Event
		parameters have the format 'param=?'.

So this is not something new introduced by this patch.

> 
> 
> > +static struct attribute *fme_perf_events_attrs_empty[] = {
> > +	NULL,
> 
> Huh?
> 
> > +};
> > +
> > +static struct attribute_group fme_perf_events_group = {
> > +	.name = "events",
> > +	.attrs = fme_perf_events_attrs_empty,
> 
> You create an empty directory?  Why?  What goes in here?
> 
> very odd...

Actually events are filled into this "events" from several different groups
via pmu->attr_update[1].

	pmu->attr_update =      fme_perf_events_groups;

pmu->attr_update allows us to update "events" directories with attributes that
depend on various HW conditions. In our case, several different groups with
different is_visible functions are filled into "events" using this method.
And several existing pmu drivers (e.g. arch/x86/events/intel/cstate.c) are
using the same way (having an empty directory first and update it using
pmu->attr_update).

But I have to admit that I should add some comments there to avoid confusion,
sorry, will do that in the next version.

[1] https://lkml.org/lkml/2019/5/4/188

Thanks
Hao

> 
> greg k-h
Wu, Hao Feb. 12, 2020, 3:19 a.m. UTC | #4
On Mon, Feb 10, 2020 at 04:34:01PM +0000, Will Deacon wrote:
> Hi,
> 
> On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> > This patch adds support for performance reporting private feature
> > for FPGA Management Engine (FME). Now it supports several different
> > performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> > and 'vtd_sip'. It allows user to use standard linux tools to access
> > these performance counters.
> 
> I had a quick look at this, and it mostly looks alright to me. Just a few
> high-level comments/questions:

Hi Will

Thanks a lot for the review! :)

> 
>   - I would still prefer for the PMU drivers to live under drivers/perf/

Hm.. one possible way is to create a platform device, and introduce a new
platform device driver under drivers/perf/.

> 
>   - You should probably give the PMU a better name than "fme%d", for example
>     "intel_fpga_dfl_fme%d".

Sure. as it's not intel only, so will use "fpga_dfl_fme" or "dfl_fme" instead.

> 
>   - CPU0 can be hotplugged off on non-x86 systems. How do you cope with
>     that?

Oh.. then we can't just always return CPU0 for cpumask, have to switch
to another available cpu. Will add code to handle this case in the next
version. Thanks!

> 
>   - readq() will emit 2x32-bit reads on some architectures. What happens
>     in this case?

64bit counter may increase and carry out of bit31 between 2-32bit reads,
we probably need some more code (add extra reads?) to handle this case.


Thanks again for these valuable comments, will try to fix all of them in
the next version. : )

Hao

> 
> Will
Greg Kroah-Hartman Feb. 12, 2020, 5:30 a.m. UTC | #5
On Wed, Feb 12, 2020 at 11:19:29AM +0800, Wu Hao wrote:
> On Mon, Feb 10, 2020 at 04:34:01PM +0000, Will Deacon wrote:
> > Hi,
> > 
> > On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> > > This patch adds support for performance reporting private feature
> > > for FPGA Management Engine (FME). Now it supports several different
> > > performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> > > and 'vtd_sip'. It allows user to use standard linux tools to access
> > > these performance counters.
> > 
> > I had a quick look at this, and it mostly looks alright to me. Just a few
> > high-level comments/questions:
> 
> Hi Will
> 
> Thanks a lot for the review! :)
> 
> > 
> >   - I would still prefer for the PMU drivers to live under drivers/perf/
> 
> Hm.. one possible way is to create a platform device, and introduce a new
> platform device driver under drivers/perf/.

No, do not abuse platform drivers, you have a real device, use it.
Wu, Hao Feb. 12, 2020, 10:02 a.m. UTC | #6
On Tue, Feb 11, 2020 at 09:30:35PM -0800, Greg KH wrote:
> On Wed, Feb 12, 2020 at 11:19:29AM +0800, Wu Hao wrote:
> > On Mon, Feb 10, 2020 at 04:34:01PM +0000, Will Deacon wrote:
> > > Hi,
> > > 
> > > On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> > > > This patch adds support for performance reporting private feature
> > > > for FPGA Management Engine (FME). Now it supports several different
> > > > performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> > > > and 'vtd_sip'. It allows user to use standard linux tools to access
> > > > these performance counters.
> > > 
> > > I had a quick look at this, and it mostly looks alright to me. Just a few
> > > high-level comments/questions:
> > 
> > Hi Will
> > 
> > Thanks a lot for the review! :)
> > 
> > > 
> > >   - I would still prefer for the PMU drivers to live under drivers/perf/
> > 
> > Hm.. one possible way is to create a platform device, and introduce a new
> > platform device driver under drivers/perf/.
> 
> No, do not abuse platform drivers, you have a real device, use it.

Sure, thanks for the comments. Then I don't have any other idea to move code to
drivers/perf/ directory, so probably only can live with current code.

Thanks
Hao
Greg Kroah-Hartman Feb. 12, 2020, 1:20 p.m. UTC | #7
On Wed, Feb 12, 2020 at 06:02:11PM +0800, Wu Hao wrote:
> On Tue, Feb 11, 2020 at 09:30:35PM -0800, Greg KH wrote:
> > On Wed, Feb 12, 2020 at 11:19:29AM +0800, Wu Hao wrote:
> > > On Mon, Feb 10, 2020 at 04:34:01PM +0000, Will Deacon wrote:
> > > > Hi,
> > > > 
> > > > On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> > > > > This patch adds support for performance reporting private feature
> > > > > for FPGA Management Engine (FME). Now it supports several different
> > > > > performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> > > > > and 'vtd_sip'. It allows user to use standard linux tools to access
> > > > > these performance counters.
> > > > 
> > > > I had a quick look at this, and it mostly looks alright to me. Just a few
> > > > high-level comments/questions:
> > > 
> > > Hi Will
> > > 
> > > Thanks a lot for the review! :)
> > > 
> > > > 
> > > >   - I would still prefer for the PMU drivers to live under drivers/perf/
> > > 
> > > Hm.. one possible way is to create a platform device, and introduce a new
> > > platform device driver under drivers/perf/.
> > 
> > No, do not abuse platform drivers, you have a real device, use it.
> 
> Sure, thanks for the comments. Then I don't have any other idea to move code to
> drivers/perf/ directory, so probably only can live with current code.

The location of the file in the kernel tree has no bearing on if you use
a platform device, a USB device, or a PCI device.  It is just a location
of a file.

You are interacting with the perf api as the driver's primary userspace
api, so put the driver into the drivers/perf/ directory.  That's all
that Will is asking you to do here.

greg k-h
Wu, Hao Feb. 13, 2020, 2:51 a.m. UTC | #8
On Wed, Feb 12, 2020 at 05:20:45AM -0800, Greg KH wrote:
> On Wed, Feb 12, 2020 at 06:02:11PM +0800, Wu Hao wrote:
> > On Tue, Feb 11, 2020 at 09:30:35PM -0800, Greg KH wrote:
> > > On Wed, Feb 12, 2020 at 11:19:29AM +0800, Wu Hao wrote:
> > > > On Mon, Feb 10, 2020 at 04:34:01PM +0000, Will Deacon wrote:
> > > > > Hi,
> > > > > 
> > > > > On Mon, Feb 10, 2020 at 11:47:49AM +0800, Wu Hao wrote:
> > > > > > This patch adds support for performance reporting private feature
> > > > > > for FPGA Management Engine (FME). Now it supports several different
> > > > > > performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> > > > > > and 'vtd_sip'. It allows user to use standard linux tools to access
> > > > > > these performance counters.
> > > > > 
> > > > > I had a quick look at this, and it mostly looks alright to me. Just a few
> > > > > high-level comments/questions:
> > > > 
> > > > Hi Will
> > > > 
> > > > Thanks a lot for the review! :)
> > > > 
> > > > > 
> > > > >   - I would still prefer for the PMU drivers to live under drivers/perf/
> > > > 
> > > > Hm.. one possible way is to create a platform device, and introduce a new
> > > > platform device driver under drivers/perf/.
> > > 
> > > No, do not abuse platform drivers, you have a real device, use it.
> > 
> > Sure, thanks for the comments. Then I don't have any other idea to move code to
> > drivers/perf/ directory, so probably only can live with current code.
> 
> The location of the file in the kernel tree has no bearing on if you use
> a platform device, a USB device, or a PCI device.  It is just a location
> of a file.
> 
> You are interacting with the perf api as the driver's primary userspace
> api, so put the driver into the drivers/perf/ directory.  That's all
> that Will is asking you to do here.

Thanks a lot for the patient explanation. : )

Actually this patch only adds a new file to existing fme platform driver, fme
platform driver already has several different types userspace interfaces,
including hwmon, sysfs and etc, so the new perf api is only one of them, as
we can't move the whole fme platform driver into drivers/perf/, we feel that
maybe we should keep that code together with other fme files in drivers/fpga/.

Thanks
Hao

> 
> greg k-h
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-fme b/Documentation/ABI/testing/sysfs-bus-event_source-devices-fme
new file mode 100644
index 0000000..71bcd98
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-fme
@@ -0,0 +1,105 @@ 
+What:		/sys/bus/event_source/devices/fmeX/format
+Date:		February 2020
+KernelVersion:  5.7
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. Attribute group to describe the magic bits
+		that go into perf_event_attr.config for a particular pmu.
+		(See ABI/testing/sysfs-bus-event_source-devices-format).
+
+		Each attribute under this group defines a bit range of the
+		perf_event_attr.config. All supported attributes are listed
+		below.
+
+		  event  = "config:0-11"  - event ID
+		  evtype = "config:12-15" - event type
+		  portid = "config:16-23" - event source
+
+		For example,
+
+		  fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
+
+		It shows this fab_mmio_read is a fabric type (0x02) event with
+		0x06 local event id for overall monitoring (portid=0xff).
+
+What:		/sys/bus/event_source/devices/fmeX/cpumask
+Date:		February 2020
+KernelVersion:  5.7
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. This file always returns 0 as all fme pmu performance
+		monitoring events are not specific to any processor, just from
+		fme device.
+
+What:		/sys/bus/event_source/devices/fmeX/events
+Date:		February 2020
+KernelVersion:  5.7
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. Attribute group to describe performance monitoring
+		events specific to fme. Each attribute in this group describes
+		a single performance monitoring event supported by this fme pmu.
+		The name of the file is the name of the event.
+		(See ABI/testing/sysfs-bus-event_source-devices-events).
+
+		All supported performance monitoring events are listed below.
+
+		Basic events (evtype=0x00)
+
+		  clock = "event=0x00,evtype=0x00,portid=0xff"
+
+		Cache events (evtype=0x01)
+
+		  cache_read_hit      = "event=0x00,evtype=0x01,portid=0xff"
+		  cache_read_miss     = "event=0x01,evtype=0x01,portid=0xff"
+		  cache_write_hit     = "event=0x02,evtype=0x01,portid=0xff"
+		  cache_write_miss    = "event=0x03,evtype=0x01,portid=0xff"
+		  cache_hold_request  = "event=0x05,evtype=0x01,portid=0xff"
+		  cache_data_write_port_contention =
+		                        "event=0x06,evtype=0x01,portid=0xff"
+		  cache_tag_write_port_contention =
+		                        "event=0x07,evtype=0x01,portid=0xff"
+		  cache_tx_req_stall  = "event=0x08,evtype=0x01,portid=0xff"
+		  cache_rx_req_stall  = "event=0x09,evtype=0x01,portid=0xff"
+		  cache_eviction      = "event=0x0a,evtype=0x01,portid=0xff"
+
+		Fabric events (evtype=0x02)
+
+		  fab_pcie0_read       = "event=0x00,evtype=0x02,portid=0xff"
+		  fab_pcie0_write      = "event=0x01,evtype=0x02,portid=0xff"
+		  fab_pcie1_read       = "event=0x02,evtype=0x02,portid=0xff"
+		  fab_pcie1_write      = "event=0x03,evtype=0x02,portid=0xff"
+		  fab_upi_read         = "event=0x04,evtype=0x02,portid=0xff"
+		  fab_upi_write        = "event=0x05,evtype=0x02,portid=0xff"
+		  fab_mmio_read        = "event=0x06,evtype=0x02,portid=0xff"
+		  fab_mmio_write       = "event=0x07,evtype=0x02,portid=0xff"
+		  fab_port_pcie0_read  = "event=0x00,evtype=0x02,portid=?"
+		  fab_port_pcie0_write = "event=0x01,evtype=0x02,portid=?"
+		  fab_port_pcie1_read  = "event=0x02,evtype=0x02,portid=?"
+		  fab_port_pcie1_write = "event=0x03,evtype=0x02,portid=?"
+		  fab_port_upi_read    = "event=0x04,evtype=0x02,portid=?"
+		  fab_port_upi_write   = "event=0x05,evtype=0x02,portid=?"
+		  fab_port_mmio_read   = "event=0x06,evtype=0x02,portid=?"
+		  fab_port_mmio_write  = "event=0x07,evtype=0x02,portid=?"
+
+		VTD events (evtype=0x03)
+
+		  vtd_port_read_transaction  = "event=0x00,evtype=0x03,portid=?"
+		  vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?"
+		  vtd_port_devtlb_read_hit   = "event=0x02,evtype=0x03,portid=?"
+		  vtd_port_devtlb_write_hit  = "event=0x03,evtype=0x03,portid=?"
+		  vtd_port_devtlb_4k_fill    = "event=0x04,evtype=0x03,portid=?"
+		  vtd_port_devtlb_2m_fill    = "event=0x05,evtype=0x03,portid=?"
+		  vtd_port_devtlb_1g_fill    = "event=0x06,evtype=0x03,portid=?"
+
+		VTD SIP events (evtype=0x04)
+
+		  vtd_sip_iotlb_4k_hit  = "event=0x00,evtype=0x04,portid=0xff"
+		  vtd_sip_iotlb_2m_hit  = "event=0x01,evtype=0x04,portid=0xff"
+		  vtd_sip_iotlb_1g_hit  = "event=0x02,evtype=0x04,portid=0xff"
+		  vtd_sip_slpwc_l3_hit  = "event=0x03,evtype=0x04,portid=0xff"
+		  vtd_sip_slpwc_l4_hit  = "event=0x04,evtype=0x04,portid=0xff"
+		  vtd_sip_rcc_hit       = "event=0x05,evtype=0x04,portid=0xff"
+		  vtd_sip_iotlb_4k_miss = "event=0x06,evtype=0x04,portid=0xff"
+		  vtd_sip_iotlb_2m_miss = "event=0x07,evtype=0x04,portid=0xff"
+		  vtd_sip_iotlb_1g_miss = "event=0x08,evtype=0x04,portid=0xff"
+		  vtd_sip_slpwc_l3_miss = "event=0x09,evtype=0x04,portid=0xff"
+		  vtd_sip_slpwc_l4_miss = "event=0x0a,evtype=0x04,portid=0xff"
+		  vtd_sip_rcc_miss      = "event=0x0b,evtype=0x04,portid=0xff"
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 72380e1..b2408a7 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -156,7 +156,7 @@  config FPGA_DFL
 
 config FPGA_DFL_FME
 	tristate "FPGA DFL FME Driver"
-	depends on FPGA_DFL && HWMON
+	depends on FPGA_DFL && HWMON && PERF_EVENTS
 	help
 	  The FPGA Management Engine (FME) is a feature device implemented
 	  under Device Feature List (DFL) framework. Select this option to
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 4865b74..d8e21df 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -40,6 +40,7 @@  obj-$(CONFIG_FPGA_DFL_FME_REGION)	+= dfl-fme-region.o
 obj-$(CONFIG_FPGA_DFL_AFU)		+= dfl-afu.o
 
 dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o
+dfl-fme-objs += dfl-fme-perf.o
 dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
 dfl-afu-objs += dfl-afu-error.o
 
diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
index 1d4690c..3533056 100644
--- a/drivers/fpga/dfl-fme-main.c
+++ b/drivers/fpga/dfl-fme-main.c
@@ -580,6 +580,10 @@  static int fme_power_mgmt_init(struct platform_device *pdev,
 		.ops = &fme_power_mgmt_ops,
 	},
 	{
+		.id_table = fme_perf_id_table,
+		.ops = &fme_perf_ops,
+	},
+	{
 		.ops = NULL,
 	},
 };
diff --git a/drivers/fpga/dfl-fme-perf.c b/drivers/fpga/dfl-fme-perf.c
new file mode 100644
index 0000000..7c6ed1e
--- /dev/null
+++ b/drivers/fpga/dfl-fme-perf.c
@@ -0,0 +1,943 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for FPGA Management Engine (FME) Global Performance Reporting
+ *
+ * Copyright 2019 Intel Corporation, Inc.
+ *
+ * Authors:
+ *   Kang Luwei <luwei.kang@intel.com>
+ *   Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ *   Wu Hao <hao.wu@intel.com>
+ *   Xu Yilun <yilun.xu@intel.com>
+ *   Joseph Grecco <joe.grecco@intel.com>
+ *   Enno Luebbers <enno.luebbers@intel.com>
+ *   Tim Whisonant <tim.whisonant@intel.com>
+ *   Ananda Ravuri <ananda.ravuri@intel.com>
+ *   Mitchel, Henry <henry.mitchel@intel.com>
+ */
+
+#include <linux/perf_event.h>
+#include "dfl.h"
+#include "dfl-fme.h"
+
+/*
+ * Performance Counter Registers for Cache.
+ *
+ * Cache Events are listed below as CACHE_EVNT_*.
+ */
+#define CACHE_CTRL			0x8
+#define CACHE_RESET_CNTR		BIT_ULL(0)
+#define CACHE_FREEZE_CNTR		BIT_ULL(8)
+#define CACHE_CTRL_EVNT			GENMASK_ULL(19, 16)
+#define CACHE_EVNT_RD_HIT		0x0
+#define CACHE_EVNT_WR_HIT		0x1
+#define CACHE_EVNT_RD_MISS		0x2
+#define CACHE_EVNT_WR_MISS		0x3
+#define CACHE_EVNT_RSVD			0x4
+#define CACHE_EVNT_HOLD_REQ		0x5
+#define CACHE_EVNT_DATA_WR_PORT_CONTEN	0x6
+#define CACHE_EVNT_TAG_WR_PORT_CONTEN	0x7
+#define CACHE_EVNT_TX_REQ_STALL		0x8
+#define CACHE_EVNT_RX_REQ_STALL		0x9
+#define CACHE_EVNT_EVICTIONS		0xa
+#define CACHE_EVNT_MAX			CACHE_EVNT_EVICTIONS
+#define CACHE_CHANNEL_SEL		BIT_ULL(20)
+#define CACHE_CHANNEL_RD		0
+#define CACHE_CHANNEL_WR		1
+#define CACHE_CNTR0			0x10
+#define CACHE_CNTR1			0x18
+#define CACHE_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
+#define CACHE_CNTR_EVNT			GENMASK_ULL(63, 60)
+
+/*
+ * Performance Counter Registers for Fabric.
+ *
+ * Fabric Events are listed below as FAB_EVNT_*
+ */
+#define FAB_CTRL			0x20
+#define FAB_RESET_CNTR			BIT_ULL(0)
+#define FAB_FREEZE_CNTR			BIT_ULL(8)
+#define FAB_CTRL_EVNT			GENMASK_ULL(19, 16)
+#define FAB_EVNT_PCIE0_RD		0x0
+#define FAB_EVNT_PCIE0_WR		0x1
+#define FAB_EVNT_PCIE1_RD		0x2
+#define FAB_EVNT_PCIE1_WR		0x3
+#define FAB_EVNT_UPI_RD			0x4
+#define FAB_EVNT_UPI_WR			0x5
+#define FAB_EVNT_MMIO_RD		0x6
+#define FAB_EVNT_MMIO_WR		0x7
+#define FAB_EVNT_MAX			FAB_EVNT_MMIO_WR
+#define FAB_PORT_ID			GENMASK_ULL(21, 20)
+#define FAB_PORT_FILTER			BIT_ULL(23)
+#define FAB_PORT_FILTER_DISABLE		0
+#define FAB_PORT_FILTER_ENABLE		1
+#define FAB_CNTR			0x28
+#define FAB_CNTR_EVNT_CNTR		GENMASK_ULL(59, 0)
+#define FAB_CNTR_EVNT			GENMASK_ULL(63, 60)
+
+/*
+ * Performance Counter Registers for Clock.
+ *
+ * Clock Counter can't be reset or frozen by SW.
+ */
+#define CLK_CNTR			0x30
+#define BASIC_EVNT_CLK			0x0
+#define BASIC_EVNT_MAX			BASIC_EVNT_CLK
+
+/*
+ * Performance Counter Registers for IOMMU / VT-D.
+ *
+ * VT-D Events are listed below as VTD_EVNT_* and VTD_SIP_EVNT_*
+ */
+#define VTD_CTRL			0x38
+#define VTD_RESET_CNTR			BIT_ULL(0)
+#define VTD_FREEZE_CNTR			BIT_ULL(8)
+#define VTD_CTRL_EVNT			GENMASK_ULL(19, 16)
+#define VTD_EVNT_AFU_MEM_RD_TRANS	0x0
+#define VTD_EVNT_AFU_MEM_WR_TRANS	0x1
+#define VTD_EVNT_AFU_DEVTLB_RD_HIT	0x2
+#define VTD_EVNT_AFU_DEVTLB_WR_HIT	0x3
+#define VTD_EVNT_DEVTLB_4K_FILL		0x4
+#define VTD_EVNT_DEVTLB_2M_FILL		0x5
+#define VTD_EVNT_DEVTLB_1G_FILL		0x6
+#define VTD_EVNT_MAX			VTD_EVNT_DEVTLB_1G_FILL
+#define VTD_CNTR			0x40
+#define VTD_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
+#define VTD_CNTR_EVNT			GENMASK_ULL(63, 60)
+
+#define VTD_SIP_CTRL			0x48
+#define VTD_SIP_RESET_CNTR		BIT_ULL(0)
+#define VTD_SIP_FREEZE_CNTR		BIT_ULL(8)
+#define VTD_SIP_CTRL_EVNT		GENMASK_ULL(19, 16)
+#define VTD_SIP_EVNT_IOTLB_4K_HIT	0x0
+#define VTD_SIP_EVNT_IOTLB_2M_HIT	0x1
+#define VTD_SIP_EVNT_IOTLB_1G_HIT	0x2
+#define VTD_SIP_EVNT_SLPWC_L3_HIT	0x3
+#define VTD_SIP_EVNT_SLPWC_L4_HIT	0x4
+#define VTD_SIP_EVNT_RCC_HIT		0x5
+#define VTD_SIP_EVNT_IOTLB_4K_MISS	0x6
+#define VTD_SIP_EVNT_IOTLB_2M_MISS	0x7
+#define VTD_SIP_EVNT_IOTLB_1G_MISS	0x8
+#define VTD_SIP_EVNT_SLPWC_L3_MISS	0x9
+#define VTD_SIP_EVNT_SLPWC_L4_MISS	0xa
+#define VTD_SIP_EVNT_RCC_MISS		0xb
+#define VTD_SIP_EVNT_MAX		VTD_SIP_EVNT_SLPWC_L4_MISS
+#define VTD_SIP_CNTR			0X50
+#define VTD_SIP_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
+#define VTD_SIP_CNTR_EVNT		GENMASK_ULL(63, 60)
+
+#define PERF_TIMEOUT			30
+
+#define PERF_MAX_PORT_NUM		1U
+
+/**
+ * struct fme_perf_priv - priv data structure for fme perf driver
+ *
+ * @dev: parent device.
+ * @ioaddr: mapped base address of mmio region.
+ * @pmu: pmu data structure for fme perf counters.
+ * @id: id of this fme performance report private feature.
+ * @fab_users: current user number on fabric counters.
+ * @fab_port_id: used to indicate current working mode of fabric counters.
+ * @fab_lock: lock to protect fabric counters working mode.
+ */
+struct fme_perf_priv {
+	struct device *dev;
+	void __iomem *ioaddr;
+	struct pmu pmu;
+	u64 id;
+
+	u32 fab_users;
+	u32 fab_port_id;
+	spinlock_t fab_lock;
+};
+
+/**
+ * struct fme_perf_event_ops - callbacks for fme perf events
+ *
+ * @event_init: callback invoked during event init.
+ * @event_destroy: callback invoked during event destroy.
+ * @read_counter: callback to read hardware counters.
+ */
+struct fme_perf_event_ops {
+	int (*event_init)(struct fme_perf_priv *priv, u32 event, u32 portid);
+	void (*event_destroy)(struct fme_perf_priv *priv, u32 event,
+			      u32 portid);
+	u64 (*read_counter)(struct fme_perf_priv *priv, u32 event, u32 portid);
+};
+
+#define to_fme_perf_priv(_pmu)	container_of(_pmu, struct fme_perf_priv, pmu)
+
+static cpumask_t fme_perf_cpumask = CPU_MASK_CPU0;
+
+static ssize_t cpumask_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	return cpumap_print_to_pagebuf(true, buf, &fme_perf_cpumask);
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *fme_perf_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static struct attribute_group fme_perf_cpumask_group = {
+	.attrs = fme_perf_cpumask_attrs,
+};
+
+#define FME_EVENT_MASK		GENMASK_ULL(11, 0)
+#define FME_EVENT_SHIFT		0
+#define FME_EVTYPE_MASK		GENMASK_ULL(15, 12)
+#define FME_EVTYPE_SHIFT	12
+#define FME_EVTYPE_BASIC	0
+#define FME_EVTYPE_CACHE	1
+#define FME_EVTYPE_FABRIC	2
+#define FME_EVTYPE_VTD		3
+#define FME_EVTYPE_VTD_SIP	4
+#define FME_EVTYPE_MAX		FME_EVTYPE_VTD_SIP
+#define FME_PORTID_MASK		GENMASK_ULL(23, 16)
+#define FME_PORTID_SHIFT	16
+#define FME_PORTID_ROOT		(0xffU)
+
+#define get_event(_config)	FIELD_GET(FME_EVENT_MASK, _config)
+#define get_evtype(_config)	FIELD_GET(FME_EVTYPE_MASK, _config)
+#define get_portid(_config)	FIELD_GET(FME_PORTID_MASK, _config)
+
+PMU_FORMAT_ATTR(event,		"config:0-11");
+PMU_FORMAT_ATTR(evtype,		"config:12-15");
+PMU_FORMAT_ATTR(portid,		"config:16-23");
+
+static struct attribute *fme_perf_format_attrs[] = {
+	&format_attr_event.attr,
+	&format_attr_evtype.attr,
+	&format_attr_portid.attr,
+	NULL,
+};
+
+static struct attribute_group fme_perf_format_group = {
+	.name = "format",
+	.attrs = fme_perf_format_attrs,
+};
+
+static struct attribute *fme_perf_events_attrs_empty[] = {
+	NULL,
+};
+
+static struct attribute_group fme_perf_events_group = {
+	.name = "events",
+	.attrs = fme_perf_events_attrs_empty,
+};
+
+static const struct attribute_group *fme_perf_groups[] = {
+	&fme_perf_format_group,
+	&fme_perf_cpumask_group,
+	&fme_perf_events_group,
+	NULL,
+};
+
+static bool is_portid_root(u32 portid)
+{
+	return portid == FME_PORTID_ROOT;
+}
+
+static bool is_portid_port(u32 portid)
+{
+	return portid < PERF_MAX_PORT_NUM;
+}
+
+static bool is_portid_root_or_port(u32 portid)
+{
+	return is_portid_root(portid) || is_portid_port(portid);
+}
+
+static int basic_event_init(struct fme_perf_priv *priv, u32 event, u32 portid)
+{
+	if (event <= BASIC_EVNT_MAX && is_portid_root(portid))
+		return 0;
+
+	return -EINVAL;
+}
+
+static u64 basic_read_event_counter(struct fme_perf_priv *priv,
+				    u32 event, u32 portid)
+{
+	void __iomem *base = priv->ioaddr;
+
+	return readq(base + CLK_CNTR);
+}
+
+static int cache_event_init(struct fme_perf_priv *priv, u32 event, u32 portid)
+{
+	if (priv->id == FME_FEATURE_ID_GLOBAL_IPERF &&
+	    event <= CACHE_EVNT_MAX && is_portid_root(portid))
+		return 0;
+
+	return -EINVAL;
+}
+
+static u64 cache_read_event_counter(struct fme_perf_priv *priv,
+				    u32 event, u32 portid)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v, count;
+	u8 channel;
+
+	if (event == CACHE_EVNT_WR_HIT || event == CACHE_EVNT_WR_MISS ||
+	    event == CACHE_EVNT_DATA_WR_PORT_CONTEN ||
+	    event == CACHE_EVNT_TAG_WR_PORT_CONTEN)
+		channel = CACHE_CHANNEL_WR;
+	else
+		channel = CACHE_CHANNEL_RD;
+
+	/* set channel access type and cache event code. */
+	v = readq(base + CACHE_CTRL);
+	v &= ~(CACHE_CHANNEL_SEL | CACHE_CTRL_EVNT);
+	v |= FIELD_PREP(CACHE_CHANNEL_SEL, channel);
+	v |= FIELD_PREP(CACHE_CTRL_EVNT, event);
+	writeq(v, base + CACHE_CTRL);
+
+	if (readq_poll_timeout_atomic(base + CACHE_CNTR0, v,
+				      FIELD_GET(CACHE_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched cache event code in counter register.\n");
+		return 0;
+	}
+
+	v = readq(base + CACHE_CNTR0);
+	count = FIELD_GET(CACHE_CNTR_EVNT_CNTR, v);
+	v = readq(base + CACHE_CNTR1);
+	count += FIELD_GET(CACHE_CNTR_EVNT_CNTR, v);
+
+	return count;
+}
+
+static bool is_fabric_event_supported(struct fme_perf_priv *priv, u32 event,
+				      u32 portid)
+{
+	if (event > FAB_EVNT_MAX || !is_portid_root_or_port(portid))
+		return false;
+
+	if (priv->id == FME_FEATURE_ID_GLOBAL_DPERF &&
+	    (event == FAB_EVNT_PCIE1_RD || event == FAB_EVNT_UPI_RD ||
+	     event == FAB_EVNT_PCIE1_WR || event == FAB_EVNT_UPI_WR))
+		return false;
+
+	return true;
+}
+
+static int fabric_event_init(struct fme_perf_priv *priv, u32 event, u32 portid)
+{
+	void __iomem *base = priv->ioaddr;
+	int ret = 0;
+	u64 v;
+
+	if (!is_fabric_event_supported(priv, event, portid))
+		return -EINVAL;
+
+	/*
+	 * as fabric counter set only can be in either overall or port mode.
+	 * In overall mode, it counts overall data for FPGA, and in port mode,
+	 * it is configured to monitor on one individual port.
+	 *
+	 * so every time, a new event is initialized, driver checks
+	 * current working mode and if someone is using this counter set.
+	 */
+	spin_lock(&priv->fab_lock);
+	if (priv->fab_users && priv->fab_port_id != portid) {
+		dev_dbg(priv->dev, "conflict fabric event monitoring mode.\n");
+		ret = -EOPNOTSUPP;
+		goto exit;
+	}
+
+	priv->fab_users++;
+
+	/*
+	 * skip if current working mode matches, otherwise change the working
+	 * mode per input port_id, to monitor overall data or another port.
+	 */
+	if (priv->fab_port_id == portid)
+		goto exit;
+
+	priv->fab_port_id = portid;
+
+	v = readq(base + FAB_CTRL);
+	v &= ~(FAB_PORT_FILTER | FAB_PORT_ID);
+
+	if (is_portid_root(portid)) {
+		v |= FIELD_PREP(FAB_PORT_FILTER, FAB_PORT_FILTER_DISABLE);
+	} else {
+		v |= FIELD_PREP(FAB_PORT_FILTER, FAB_PORT_FILTER_ENABLE);
+		v |= FIELD_PREP(FAB_PORT_ID, portid);
+	}
+	writeq(v, base + FAB_CTRL);
+
+exit:
+	spin_unlock(&priv->fab_lock);
+	return ret;
+}
+
+static void fabric_event_destroy(struct fme_perf_priv *priv, u32 event,
+				 u32 portid)
+{
+	spin_lock(&priv->fab_lock);
+	priv->fab_users--;
+	spin_unlock(&priv->fab_lock);
+}
+
+static u64 fabric_read_event_counter(struct fme_perf_priv *priv, u32 event,
+				     u32 portid)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	v = readq(base + FAB_CTRL);
+	v &= ~FAB_CTRL_EVNT;
+	v |= FIELD_PREP(FAB_CTRL_EVNT, event);
+	writeq(v, base + FAB_CTRL);
+
+	if (readq_poll_timeout_atomic(base + FAB_CNTR, v,
+				      FIELD_GET(FAB_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched fab event code in counter register.\n");
+		return 0;
+	}
+
+	v = readq(base + FAB_CNTR);
+	return FIELD_GET(FAB_CNTR_EVNT_CNTR, v);
+}
+
+static int vtd_event_init(struct fme_perf_priv *priv, u32 event, u32 portid)
+{
+	if (priv->id == FME_FEATURE_ID_GLOBAL_IPERF &&
+	    event <= VTD_EVNT_MAX && is_portid_port(portid))
+		return 0;
+
+	return -EINVAL;
+}
+
+static u64 vtd_read_event_counter(struct fme_perf_priv *priv, u32 event,
+				  u32 portid)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	event += (portid * (VTD_EVNT_MAX + 1));
+
+	v = readq(base + VTD_CTRL);
+	v &= ~VTD_CTRL_EVNT;
+	v |= FIELD_PREP(VTD_CTRL_EVNT, event);
+	writeq(v, base + VTD_CTRL);
+
+	if (readq_poll_timeout_atomic(base + VTD_CNTR, v,
+				      FIELD_GET(VTD_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched vtd event code in counter register.\n");
+		return 0;
+	}
+
+	v = readq(base + VTD_CNTR);
+	return FIELD_GET(VTD_CNTR_EVNT_CNTR, v);
+}
+
+static int vtd_sip_event_init(struct fme_perf_priv *priv, u32 event, u32 portid)
+{
+	if (priv->id == FME_FEATURE_ID_GLOBAL_IPERF &&
+	    event <= VTD_SIP_EVNT_MAX && is_portid_root(portid))
+		return 0;
+
+	return -EINVAL;
+}
+
+static u64 vtd_sip_read_event_counter(struct fme_perf_priv *priv, u32 event,
+				      u32 portid)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	v = readq(base + VTD_SIP_CTRL);
+	v &= ~VTD_SIP_CTRL_EVNT;
+	v |= FIELD_PREP(VTD_SIP_CTRL_EVNT, event);
+	writeq(v, base + VTD_SIP_CTRL);
+
+	if (readq_poll_timeout_atomic(base + VTD_SIP_CNTR, v,
+				      FIELD_GET(VTD_SIP_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched vtd sip event code in counter register\n");
+		return 0;
+	}
+
+	v = readq(base + VTD_SIP_CNTR);
+	return FIELD_GET(VTD_SIP_CNTR_EVNT_CNTR, v);
+}
+
+static struct fme_perf_event_ops fme_perf_event_ops[] = {
+	[FME_EVTYPE_BASIC]	= {.event_init = basic_event_init,
+				   .read_counter = basic_read_event_counter,},
+	[FME_EVTYPE_CACHE]	= {.event_init = cache_event_init,
+				   .read_counter = cache_read_event_counter,},
+	[FME_EVTYPE_FABRIC]	= {.event_init = fabric_event_init,
+				   .event_destroy = fabric_event_destroy,
+				   .read_counter = fabric_read_event_counter,},
+	[FME_EVTYPE_VTD]	= {.event_init = vtd_event_init,
+				   .read_counter = vtd_read_event_counter,},
+	[FME_EVTYPE_VTD_SIP]	= {.event_init = vtd_sip_event_init,
+				   .read_counter = vtd_sip_read_event_counter,},
+};
+
+static ssize_t fme_perf_event_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct dev_ext_attribute *eattr;
+	unsigned long config;
+	char *ptr = buf;
+
+	eattr = container_of(attr, struct dev_ext_attribute, attr);
+	config = (unsigned long)eattr->var;
+
+	ptr += sprintf(ptr, "event=0x%02x", (unsigned int)get_event(config));
+	ptr += sprintf(ptr, ",evtype=0x%02x", (unsigned int)get_evtype(config));
+
+	if (is_portid_root(get_portid(config)))
+		ptr += sprintf(ptr, ",portid=0x%02x\n", FME_PORTID_ROOT);
+	else
+		ptr += sprintf(ptr, ",portid=?\n");
+
+	return (ssize_t)(ptr - buf);
+}
+
+#define FME_EVENT_ATTR(_name) \
+	__ATTR(_name, 0444, fme_perf_event_show, NULL)
+
+#define FME_PORT_EVENT_CONFIG(_event, _type)				\
+	(void *)((((_event) << FME_EVENT_SHIFT) & FME_EVENT_MASK) |	\
+		(((_type) << FME_EVTYPE_SHIFT) & FME_EVTYPE_MASK))
+
+#define FME_EVENT_CONFIG(_event, _type)					\
+	(void *)((((_event) << FME_EVENT_SHIFT) & FME_EVENT_MASK) |	\
+		(((_type) << FME_EVTYPE_SHIFT) & FME_EVTYPE_MASK) |	\
+		(FME_PORTID_ROOT << FME_PORTID_SHIFT))
+
+/* FME Perf Basic Events */
+#define FME_EVENT_BASIC(_name, _event)					\
+static struct dev_ext_attribute fme_perf_event_##_name = {		\
+	.attr = FME_EVENT_ATTR(_name),					\
+	.var = FME_EVENT_CONFIG(_event, FME_EVTYPE_BASIC),		\
+}
+
+FME_EVENT_BASIC(clock, BASIC_EVNT_CLK);
+
+static struct attribute *fme_perf_basic_events_attrs[] = {
+	&fme_perf_event_clock.attr.attr,
+	NULL,
+};
+
+static const struct attribute_group fme_perf_basic_events_group = {
+	.name = "events",
+	.attrs = fme_perf_basic_events_attrs,
+};
+
+/* FME Perf Cache Events */
+#define FME_EVENT_CACHE(_name, _event)					\
+static struct dev_ext_attribute fme_perf_event_cache_##_name = {	\
+	.attr = FME_EVENT_ATTR(cache_##_name),				\
+	.var = FME_EVENT_CONFIG(_event, FME_EVTYPE_CACHE),		\
+}
+
+FME_EVENT_CACHE(read_hit,     CACHE_EVNT_RD_HIT);
+FME_EVENT_CACHE(read_miss,    CACHE_EVNT_RD_MISS);
+FME_EVENT_CACHE(write_hit,    CACHE_EVNT_WR_HIT);
+FME_EVENT_CACHE(write_miss,   CACHE_EVNT_WR_MISS);
+FME_EVENT_CACHE(hold_request, CACHE_EVNT_HOLD_REQ);
+FME_EVENT_CACHE(tx_req_stall, CACHE_EVNT_TX_REQ_STALL);
+FME_EVENT_CACHE(rx_req_stall, CACHE_EVNT_RX_REQ_STALL);
+FME_EVENT_CACHE(eviction,     CACHE_EVNT_EVICTIONS);
+FME_EVENT_CACHE(data_write_port_contention, CACHE_EVNT_DATA_WR_PORT_CONTEN);
+FME_EVENT_CACHE(tag_write_port_contention,  CACHE_EVNT_TAG_WR_PORT_CONTEN);
+
+static struct attribute *fme_perf_cache_events_attrs[] = {
+	&fme_perf_event_cache_read_hit.attr.attr,
+	&fme_perf_event_cache_read_miss.attr.attr,
+	&fme_perf_event_cache_write_hit.attr.attr,
+	&fme_perf_event_cache_write_miss.attr.attr,
+	&fme_perf_event_cache_hold_request.attr.attr,
+	&fme_perf_event_cache_tx_req_stall.attr.attr,
+	&fme_perf_event_cache_rx_req_stall.attr.attr,
+	&fme_perf_event_cache_eviction.attr.attr,
+	&fme_perf_event_cache_data_write_port_contention.attr.attr,
+	&fme_perf_event_cache_tag_write_port_contention.attr.attr,
+	NULL,
+};
+
+static umode_t fme_perf_events_visible(struct kobject *kobj,
+				       struct attribute *attr, int n)
+{
+	struct pmu *pmu = dev_get_drvdata(kobj_to_dev(kobj));
+	struct fme_perf_priv *priv = to_fme_perf_priv(pmu);
+
+	return (priv->id == FME_FEATURE_ID_GLOBAL_IPERF) ? attr->mode : 0;
+}
+
+static const struct attribute_group fme_perf_cache_events_group = {
+	.name = "events",
+	.attrs = fme_perf_cache_events_attrs,
+	.is_visible = fme_perf_events_visible,
+};
+
+/* FME Perf Fabric Events */
+#define FME_EVENT_FABRIC(_name, _event)					\
+static struct dev_ext_attribute fme_perf_event_fab_##_name = {		\
+	.attr = FME_EVENT_ATTR(fab_##_name),				\
+	.var = FME_EVENT_CONFIG(_event, FME_EVTYPE_FABRIC),		\
+}
+
+#define FME_EVENT_FABRIC_PORT(_name, _event)				\
+static struct dev_ext_attribute fme_perf_event_fab_port_##_name = {	\
+	.attr = FME_EVENT_ATTR(fab_port_##_name),			\
+	.var = FME_PORT_EVENT_CONFIG(_event, FME_EVTYPE_FABRIC),	\
+}
+
+FME_EVENT_FABRIC(pcie0_read,  FAB_EVNT_PCIE0_RD);
+FME_EVENT_FABRIC(pcie0_write, FAB_EVNT_PCIE0_WR);
+FME_EVENT_FABRIC(pcie1_read,  FAB_EVNT_PCIE1_RD);
+FME_EVENT_FABRIC(pcie1_write, FAB_EVNT_PCIE1_WR);
+FME_EVENT_FABRIC(upi_read,    FAB_EVNT_UPI_RD);
+FME_EVENT_FABRIC(upi_write,   FAB_EVNT_UPI_WR);
+FME_EVENT_FABRIC(mmio_read,   FAB_EVNT_MMIO_RD);
+FME_EVENT_FABRIC(mmio_write,  FAB_EVNT_MMIO_WR);
+
+FME_EVENT_FABRIC_PORT(pcie0_read,  FAB_EVNT_PCIE0_RD);
+FME_EVENT_FABRIC_PORT(pcie0_write, FAB_EVNT_PCIE0_WR);
+FME_EVENT_FABRIC_PORT(pcie1_read,  FAB_EVNT_PCIE1_RD);
+FME_EVENT_FABRIC_PORT(pcie1_write, FAB_EVNT_PCIE1_WR);
+FME_EVENT_FABRIC_PORT(upi_read,    FAB_EVNT_UPI_RD);
+FME_EVENT_FABRIC_PORT(upi_write,   FAB_EVNT_UPI_WR);
+FME_EVENT_FABRIC_PORT(mmio_read,   FAB_EVNT_MMIO_RD);
+FME_EVENT_FABRIC_PORT(mmio_write,  FAB_EVNT_MMIO_WR);
+
+static struct attribute *fme_perf_fabric_events_attrs[] = {
+	&fme_perf_event_fab_pcie0_read.attr.attr,
+	&fme_perf_event_fab_pcie0_write.attr.attr,
+	&fme_perf_event_fab_pcie1_read.attr.attr,
+	&fme_perf_event_fab_pcie1_write.attr.attr,
+	&fme_perf_event_fab_upi_read.attr.attr,
+	&fme_perf_event_fab_upi_write.attr.attr,
+	&fme_perf_event_fab_mmio_read.attr.attr,
+	&fme_perf_event_fab_mmio_write.attr.attr,
+	&fme_perf_event_fab_port_pcie0_read.attr.attr,
+	&fme_perf_event_fab_port_pcie0_write.attr.attr,
+	&fme_perf_event_fab_port_pcie1_read.attr.attr,
+	&fme_perf_event_fab_port_pcie1_write.attr.attr,
+	&fme_perf_event_fab_port_upi_read.attr.attr,
+	&fme_perf_event_fab_port_upi_write.attr.attr,
+	&fme_perf_event_fab_port_mmio_read.attr.attr,
+	&fme_perf_event_fab_port_mmio_write.attr.attr,
+	NULL,
+};
+
+static umode_t fme_perf_fabric_events_visible(struct kobject *kobj,
+					      struct attribute *attr, int n)
+{
+	struct pmu *pmu = dev_get_drvdata(kobj_to_dev(kobj));
+	struct fme_perf_priv *priv = to_fme_perf_priv(pmu);
+	struct dev_ext_attribute *eattr;
+	unsigned long var;
+
+	eattr = container_of(attr, struct dev_ext_attribute, attr.attr);
+	var = (unsigned long)eattr->var;
+
+	if (is_fabric_event_supported(priv, get_event(var), get_portid(var)))
+		return attr->mode;
+
+	return 0;
+}
+
+static const struct attribute_group fme_perf_fabric_events_group = {
+	.name = "events",
+	.attrs = fme_perf_fabric_events_attrs,
+	.is_visible = fme_perf_fabric_events_visible,
+};
+
+/* FME Perf VTD Events */
+#define FME_EVENT_VTD_PORT(_name, _event)				\
+static struct dev_ext_attribute fme_perf_event_vtd_port_##_name = {	\
+	.attr = FME_EVENT_ATTR(vtd_port_##_name),			\
+	.var = FME_PORT_EVENT_CONFIG(_event, FME_EVTYPE_VTD),		\
+}
+
+FME_EVENT_VTD_PORT(read_transaction,  VTD_EVNT_AFU_MEM_RD_TRANS);
+FME_EVENT_VTD_PORT(write_transaction, VTD_EVNT_AFU_MEM_WR_TRANS);
+FME_EVENT_VTD_PORT(devtlb_read_hit,   VTD_EVNT_AFU_DEVTLB_RD_HIT);
+FME_EVENT_VTD_PORT(devtlb_write_hit,  VTD_EVNT_AFU_DEVTLB_WR_HIT);
+FME_EVENT_VTD_PORT(devtlb_4k_fill,    VTD_EVNT_DEVTLB_4K_FILL);
+FME_EVENT_VTD_PORT(devtlb_2m_fill,    VTD_EVNT_DEVTLB_2M_FILL);
+FME_EVENT_VTD_PORT(devtlb_1g_fill,    VTD_EVNT_DEVTLB_1G_FILL);
+
+static struct attribute *fme_perf_vtd_events_attrs[] = {
+	&fme_perf_event_vtd_port_read_transaction.attr.attr,
+	&fme_perf_event_vtd_port_write_transaction.attr.attr,
+	&fme_perf_event_vtd_port_devtlb_read_hit.attr.attr,
+	&fme_perf_event_vtd_port_devtlb_write_hit.attr.attr,
+	&fme_perf_event_vtd_port_devtlb_4k_fill.attr.attr,
+	&fme_perf_event_vtd_port_devtlb_2m_fill.attr.attr,
+	&fme_perf_event_vtd_port_devtlb_1g_fill.attr.attr,
+	NULL,
+};
+
+static const struct attribute_group fme_perf_vtd_events_group = {
+	.name = "events",
+	.attrs = fme_perf_vtd_events_attrs,
+	.is_visible = fme_perf_events_visible,
+};
+
+/* FME Perf VTD SIP Events */
+#define FME_EVENT_VTD_SIP(_name, _event)				\
+static struct dev_ext_attribute fme_perf_event_vtd_sip_##_name = {	\
+	.attr = FME_EVENT_ATTR(vtd_sip_##_name),			\
+	.var = FME_EVENT_CONFIG(_event, FME_EVTYPE_VTD_SIP),		\
+}
+
+FME_EVENT_VTD_SIP(iotlb_4k_hit,  VTD_SIP_EVNT_IOTLB_4K_HIT);
+FME_EVENT_VTD_SIP(iotlb_2m_hit,  VTD_SIP_EVNT_IOTLB_2M_HIT);
+FME_EVENT_VTD_SIP(iotlb_1g_hit,  VTD_SIP_EVNT_IOTLB_1G_HIT);
+FME_EVENT_VTD_SIP(slpwc_l3_hit,  VTD_SIP_EVNT_SLPWC_L3_HIT);
+FME_EVENT_VTD_SIP(slpwc_l4_hit,  VTD_SIP_EVNT_SLPWC_L4_HIT);
+FME_EVENT_VTD_SIP(rcc_hit,       VTD_SIP_EVNT_RCC_HIT);
+FME_EVENT_VTD_SIP(iotlb_4k_miss, VTD_SIP_EVNT_IOTLB_4K_MISS);
+FME_EVENT_VTD_SIP(iotlb_2m_miss, VTD_SIP_EVNT_IOTLB_2M_MISS);
+FME_EVENT_VTD_SIP(iotlb_1g_miss, VTD_SIP_EVNT_IOTLB_1G_MISS);
+FME_EVENT_VTD_SIP(slpwc_l3_miss, VTD_SIP_EVNT_SLPWC_L3_MISS);
+FME_EVENT_VTD_SIP(slpwc_l4_miss, VTD_SIP_EVNT_SLPWC_L4_MISS);
+FME_EVENT_VTD_SIP(rcc_miss,      VTD_SIP_EVNT_RCC_MISS);
+
+static struct attribute *fme_perf_vtd_sip_events_attrs[] = {
+	&fme_perf_event_vtd_sip_iotlb_4k_hit.attr.attr,
+	&fme_perf_event_vtd_sip_iotlb_2m_hit.attr.attr,
+	&fme_perf_event_vtd_sip_iotlb_1g_hit.attr.attr,
+	&fme_perf_event_vtd_sip_slpwc_l3_hit.attr.attr,
+	&fme_perf_event_vtd_sip_slpwc_l4_hit.attr.attr,
+	&fme_perf_event_vtd_sip_rcc_hit.attr.attr,
+	&fme_perf_event_vtd_sip_iotlb_4k_miss.attr.attr,
+	&fme_perf_event_vtd_sip_iotlb_2m_miss.attr.attr,
+	&fme_perf_event_vtd_sip_iotlb_1g_miss.attr.attr,
+	&fme_perf_event_vtd_sip_slpwc_l3_miss.attr.attr,
+	&fme_perf_event_vtd_sip_slpwc_l4_miss.attr.attr,
+	&fme_perf_event_vtd_sip_rcc_miss.attr.attr,
+	NULL,
+};
+
+static const struct attribute_group fme_perf_vtd_sip_events_group = {
+	.name = "events",
+	.attrs = fme_perf_vtd_sip_events_attrs,
+	.is_visible = fme_perf_events_visible,
+};
+
+static const struct attribute_group *fme_perf_events_groups[] = {
+	&fme_perf_basic_events_group,
+	&fme_perf_cache_events_group,
+	&fme_perf_fabric_events_group,
+	&fme_perf_vtd_events_group,
+	&fme_perf_vtd_sip_events_group,
+	NULL,
+};
+
+static struct fme_perf_event_ops *get_event_ops(u32 evtype)
+{
+	if (evtype > FME_EVTYPE_MAX)
+		return NULL;
+
+	return &fme_perf_event_ops[evtype];
+}
+
+static void fme_perf_event_destroy(struct perf_event *event)
+{
+	struct fme_perf_event_ops *ops = get_event_ops(event->hw.event_base);
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+
+	if (ops->event_destroy)
+		ops->event_destroy(priv, event->hw.idx, event->hw.config_base);
+}
+
+static int fme_perf_event_init(struct perf_event *event)
+{
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	struct fme_perf_event_ops *ops;
+	u32 eventid, evtype, portid;
+
+	/* test the event attr type check for PMU enumeration */
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	/*
+	 * fme counters are shared across all cores.
+	 * Therefore, it does not support per-process mode.
+	 * Also, it does not support event sampling mode.
+	 */
+	if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+		return -EINVAL;
+
+	if (event->cpu < 0)
+		return -EINVAL;
+
+	eventid = get_event(event->attr.config);
+	portid = get_portid(event->attr.config);
+	evtype = get_evtype(event->attr.config);
+	if (evtype > FME_EVTYPE_MAX)
+		return -EINVAL;
+
+	hwc->event_base = evtype;
+	hwc->idx = (int)eventid;
+	hwc->config_base = portid;
+
+	event->destroy = fme_perf_event_destroy;
+
+	dev_dbg(priv->dev, "%s event=0x%x, evtype=0x%x, portid=0x%x,\n",
+		__func__, eventid, evtype, portid);
+
+	ops = get_event_ops(evtype);
+	if (ops->event_init)
+		return ops->event_init(priv, eventid, portid);
+
+	return 0;
+}
+
+static void fme_perf_event_update(struct perf_event *event)
+{
+	struct fme_perf_event_ops *ops = get_event_ops(event->hw.event_base);
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 now, prev, delta;
+
+	now = ops->read_counter(priv, (u32)hwc->idx, hwc->config_base);
+	prev = local64_read(&hwc->prev_count);
+	delta = now - prev;
+
+	local64_add(delta, &event->count);
+}
+
+static void fme_perf_event_start(struct perf_event *event, int flags)
+{
+	struct fme_perf_event_ops *ops = get_event_ops(event->hw.event_base);
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 count;
+
+	count = ops->read_counter(priv, (u32)hwc->idx, hwc->config_base);
+	local64_set(&hwc->prev_count, count);
+}
+
+static void fme_perf_event_stop(struct perf_event *event, int flags)
+{
+	fme_perf_event_update(event);
+}
+
+static int fme_perf_event_add(struct perf_event *event, int flags)
+{
+	if (flags & PERF_EF_START)
+		fme_perf_event_start(event, flags);
+
+	return 0;
+}
+
+static void fme_perf_event_del(struct perf_event *event, int flags)
+{
+	fme_perf_event_stop(event, PERF_EF_UPDATE);
+}
+
+static void fme_perf_event_read(struct perf_event *event)
+{
+	fme_perf_event_update(event);
+}
+
+static void fme_perf_setup_hardware(struct fme_perf_priv *priv)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	/* read and save current working mode for fabric counters */
+	v = readq(base + FAB_CTRL);
+
+	if (FIELD_GET(FAB_PORT_FILTER, v) == FAB_PORT_FILTER_DISABLE)
+		priv->fab_port_id = FME_PORTID_ROOT;
+	else
+		priv->fab_port_id = FIELD_GET(FAB_PORT_ID, v);
+}
+
+static int fme_perf_pmu_register(struct platform_device *pdev,
+				 struct fme_perf_priv *priv)
+{
+	struct pmu *pmu = &priv->pmu;
+	char *name;
+	int ret;
+
+	spin_lock_init(&priv->fab_lock);
+
+	fme_perf_setup_hardware(priv);
+
+	pmu->task_ctx_nr =	perf_invalid_context;
+	pmu->attr_groups =	fme_perf_groups;
+	pmu->attr_update =	fme_perf_events_groups;
+	pmu->event_init =	fme_perf_event_init;
+	pmu->add =		fme_perf_event_add;
+	pmu->del =		fme_perf_event_del;
+	pmu->start =		fme_perf_event_start;
+	pmu->stop =		fme_perf_event_stop;
+	pmu->read =		fme_perf_event_read;
+	pmu->capabilities =	PERF_PMU_CAP_NO_INTERRUPT |
+				PERF_PMU_CAP_NO_EXCLUDE;
+
+	name = devm_kasprintf(priv->dev, GFP_KERNEL, "fme%d", pdev->id);
+
+	ret = perf_pmu_register(pmu, name, -1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void fme_perf_pmu_unregister(struct fme_perf_priv *priv)
+{
+	perf_pmu_unregister(&priv->pmu);
+}
+
+static int fme_perf_init(struct platform_device *pdev,
+			 struct dfl_feature *feature)
+{
+	struct fme_perf_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->ioaddr = feature->ioaddr;
+	priv->id = feature->id;
+
+	ret = fme_perf_pmu_register(pdev, priv);
+	if (ret)
+		return ret;
+
+	feature->priv = priv;
+	return 0;
+}
+
+static void fme_perf_uinit(struct platform_device *pdev,
+			   struct dfl_feature *feature)
+{
+	struct fme_perf_priv *priv = feature->priv;
+
+	fme_perf_pmu_unregister(priv);
+}
+
+const struct dfl_feature_id fme_perf_id_table[] = {
+	{.id = FME_FEATURE_ID_GLOBAL_IPERF,},
+	{.id = FME_FEATURE_ID_GLOBAL_DPERF,},
+	{0,}
+};
+
+const struct dfl_feature_ops fme_perf_ops = {
+	.init = fme_perf_init,
+	.uinit = fme_perf_uinit,
+};
diff --git a/drivers/fpga/dfl-fme.h b/drivers/fpga/dfl-fme.h
index 6685c8e..4195dd6 100644
--- a/drivers/fpga/dfl-fme.h
+++ b/drivers/fpga/dfl-fme.h
@@ -38,5 +38,7 @@  struct dfl_fme {
 extern const struct dfl_feature_ops fme_global_err_ops;
 extern const struct dfl_feature_id fme_global_err_id_table[];
 extern const struct attribute_group fme_global_err_group;
+extern const struct dfl_feature_ops fme_perf_ops;
+extern const struct dfl_feature_id fme_perf_id_table[];
 
 #endif /* __DFL_FME_H */
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index 9f0e656..d312678 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -197,12 +197,14 @@  struct dfl_feature_driver {
  *		    feature dev (platform device)'s reources.
  * @ioaddr: mapped mmio resource address.
  * @ops: ops of this sub feature.
+ * @priv: priv data of this feature.
  */
 struct dfl_feature {
 	u64 id;
 	int resource_index;
 	void __iomem *ioaddr;
 	const struct dfl_feature_ops *ops;
+	void *priv;
 };
 
 #define DEV_STATUS_IN_USE	0