Message ID | 1581166975-22949-3-git-send-email-stefan.wahren@i2se.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | 90bfaf028d61a6d523c685b63c2bcc94eebb8057 |
Headers | show |
Series | pinctrl: bcm2835: Add support for all BCM2711 GPIOs | expand |
On Sat, 2020-02-08 at 14:02 +0100, Stefan Wahren wrote: > This prepares the platform data to be easier to extend for more GPIOs. > Except of this there is no functional change. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Thanks! > drivers/pinctrl/bcm/pinctrl-bcm2835.c | 57 +++++++++++++++++++++++++++------- > - > 1 file changed, 44 insertions(+), 13 deletions(-) > > diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c > b/drivers/pinctrl/bcm/pinctrl-bcm2835.c > index 3fc2638..7f0a9c6 100644 > --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c > +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c > @@ -82,6 +82,7 @@ struct bcm2835_pinctrl { > > struct pinctrl_dev *pctl_dev; > struct gpio_chip gpio_chip; > + struct pinctrl_desc pctl_desc; > struct pinctrl_gpio_range gpio_range; > > raw_spinlock_t irq_lock[BCM2835_NUM_BANKS]; > @@ -1051,7 +1052,7 @@ static const struct pinconf_ops bcm2711_pinconf_ops = { > .pin_config_set = bcm2711_pinconf_set, > }; > > -static struct pinctrl_desc bcm2835_pinctrl_desc = { > +static const struct pinctrl_desc bcm2835_pinctrl_desc = { > .name = MODULE_NAME, > .pins = bcm2835_gpio_pins, > .npins = ARRAY_SIZE(bcm2835_gpio_pins), > @@ -1061,19 +1062,47 @@ static struct pinctrl_desc bcm2835_pinctrl_desc = { > .owner = THIS_MODULE, > }; > > -static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = { > +static const struct pinctrl_desc bcm2711_pinctrl_desc = { > + .name = MODULE_NAME, > + .pins = bcm2835_gpio_pins, > + .npins = ARRAY_SIZE(bcm2835_gpio_pins), > + .pctlops = &bcm2835_pctl_ops, > + .pmxops = &bcm2835_pmx_ops, > + .confops = &bcm2711_pinconf_ops, > + .owner = THIS_MODULE, > +}; > + > +static const struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = { > .name = MODULE_NAME, > .npins = BCM2835_NUM_GPIOS, > }; > > +struct bcm_plat_data { > + const struct gpio_chip *gpio_chip; > + const struct pinctrl_desc *pctl_desc; > + const struct pinctrl_gpio_range *gpio_range; > +}; > + > +static const struct bcm_plat_data bcm2835_plat_data = { > + .gpio_chip = &bcm2835_gpio_chip, > + .pctl_desc = &bcm2835_pinctrl_desc, > + .gpio_range = &bcm2835_pinctrl_gpio_range, > +}; > + > +static const struct bcm_plat_data bcm2711_plat_data = { > + .gpio_chip = &bcm2835_gpio_chip, > + .pctl_desc = &bcm2711_pinctrl_desc, > + .gpio_range = &bcm2835_pinctrl_gpio_range, > +}; > + > static const struct of_device_id bcm2835_pinctrl_match[] = { > { > .compatible = "brcm,bcm2835-gpio", > - .data = &bcm2835_pinconf_ops, > + .data = &bcm2835_plat_data, > }, > { > .compatible = "brcm,bcm2711-gpio", > - .data = &bcm2711_pinconf_ops, > + .data = &bcm2711_plat_data, > }, > {} > }; > @@ -1082,6 +1111,7 @@ static int bcm2835_pinctrl_probe(struct platform_device > *pdev) > { > struct device *dev = &pdev->dev; > struct device_node *np = dev->of_node; > + const struct bcm_plat_data *pdata; > struct bcm2835_pinctrl *pc; > struct gpio_irq_chip *girq; > struct resource iomem; > @@ -1108,7 +1138,13 @@ static int bcm2835_pinctrl_probe(struct platform_device > *pdev) > if (IS_ERR(pc->base)) > return PTR_ERR(pc->base); > > - pc->gpio_chip = bcm2835_gpio_chip; > + match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); > + if (!match) > + return -EINVAL; > + > + pdata = match->data; > + > + pc->gpio_chip = *pdata->gpio_chip; > pc->gpio_chip.parent = dev; > pc->gpio_chip.of_node = np; > > @@ -1159,19 +1195,14 @@ static int bcm2835_pinctrl_probe(struct > platform_device *pdev) > return err; > } > > - match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); > - if (match) { > - bcm2835_pinctrl_desc.confops = > - (const struct pinconf_ops *)match->data; > - } > - > - pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc); > + pc->pctl_desc = *pdata->pctl_desc; > + pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); > if (IS_ERR(pc->pctl_dev)) { > gpiochip_remove(&pc->gpio_chip); > return PTR_ERR(pc->pctl_dev); > } > > - pc->gpio_range = bcm2835_pinctrl_gpio_range; > + pc->gpio_range = *pdata->gpio_range; > pc->gpio_range.base = pc->gpio_chip.base; > pc->gpio_range.gc = &pc->gpio_chip; > pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
On Sat, Feb 8, 2020 at 2:03 PM Stefan Wahren <stefan.wahren@i2se.com> wrote: > This prepares the platform data to be easier to extend for more GPIOs. > Except of this there is no functional change. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Patch applied with Nicolas' Review tag. Yours, Linus Walleij
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 3fc2638..7f0a9c6 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -82,6 +82,7 @@ struct bcm2835_pinctrl { struct pinctrl_dev *pctl_dev; struct gpio_chip gpio_chip; + struct pinctrl_desc pctl_desc; struct pinctrl_gpio_range gpio_range; raw_spinlock_t irq_lock[BCM2835_NUM_BANKS]; @@ -1051,7 +1052,7 @@ static const struct pinconf_ops bcm2711_pinconf_ops = { .pin_config_set = bcm2711_pinconf_set, }; -static struct pinctrl_desc bcm2835_pinctrl_desc = { +static const struct pinctrl_desc bcm2835_pinctrl_desc = { .name = MODULE_NAME, .pins = bcm2835_gpio_pins, .npins = ARRAY_SIZE(bcm2835_gpio_pins), @@ -1061,19 +1062,47 @@ static struct pinctrl_desc bcm2835_pinctrl_desc = { .owner = THIS_MODULE, }; -static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = { +static const struct pinctrl_desc bcm2711_pinctrl_desc = { + .name = MODULE_NAME, + .pins = bcm2835_gpio_pins, + .npins = ARRAY_SIZE(bcm2835_gpio_pins), + .pctlops = &bcm2835_pctl_ops, + .pmxops = &bcm2835_pmx_ops, + .confops = &bcm2711_pinconf_ops, + .owner = THIS_MODULE, +}; + +static const struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = { .name = MODULE_NAME, .npins = BCM2835_NUM_GPIOS, }; +struct bcm_plat_data { + const struct gpio_chip *gpio_chip; + const struct pinctrl_desc *pctl_desc; + const struct pinctrl_gpio_range *gpio_range; +}; + +static const struct bcm_plat_data bcm2835_plat_data = { + .gpio_chip = &bcm2835_gpio_chip, + .pctl_desc = &bcm2835_pinctrl_desc, + .gpio_range = &bcm2835_pinctrl_gpio_range, +}; + +static const struct bcm_plat_data bcm2711_plat_data = { + .gpio_chip = &bcm2835_gpio_chip, + .pctl_desc = &bcm2711_pinctrl_desc, + .gpio_range = &bcm2835_pinctrl_gpio_range, +}; + static const struct of_device_id bcm2835_pinctrl_match[] = { { .compatible = "brcm,bcm2835-gpio", - .data = &bcm2835_pinconf_ops, + .data = &bcm2835_plat_data, }, { .compatible = "brcm,bcm2711-gpio", - .data = &bcm2711_pinconf_ops, + .data = &bcm2711_plat_data, }, {} }; @@ -1082,6 +1111,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; + const struct bcm_plat_data *pdata; struct bcm2835_pinctrl *pc; struct gpio_irq_chip *girq; struct resource iomem; @@ -1108,7 +1138,13 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) if (IS_ERR(pc->base)) return PTR_ERR(pc->base); - pc->gpio_chip = bcm2835_gpio_chip; + match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); + if (!match) + return -EINVAL; + + pdata = match->data; + + pc->gpio_chip = *pdata->gpio_chip; pc->gpio_chip.parent = dev; pc->gpio_chip.of_node = np; @@ -1159,19 +1195,14 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) return err; } - match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); - if (match) { - bcm2835_pinctrl_desc.confops = - (const struct pinconf_ops *)match->data; - } - - pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc); + pc->pctl_desc = *pdata->pctl_desc; + pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); if (IS_ERR(pc->pctl_dev)) { gpiochip_remove(&pc->gpio_chip); return PTR_ERR(pc->pctl_dev); } - pc->gpio_range = bcm2835_pinctrl_gpio_range; + pc->gpio_range = *pdata->gpio_range; pc->gpio_range.base = pc->gpio_chip.base; pc->gpio_range.gc = &pc->gpio_chip; pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
This prepares the platform data to be easier to extend for more GPIOs. Except of this there is no functional change. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- drivers/pinctrl/bcm/pinctrl-bcm2835.c | 57 +++++++++++++++++++++++++++-------- 1 file changed, 44 insertions(+), 13 deletions(-)