diff mbox series

[RFC,01/11] firmware: arm_scmi: Add receive buffer support for notifications

Message ID 20200120122333.46217-2-cristian.marussi@arm.com (mailing list archive)
State New, archived
Headers show
Series SCMI Notifications Support | expand

Commit Message

Cristian Marussi Jan. 20, 2020, 12:23 p.m. UTC
From: Sudeep Holla <sudeep.holla@arm.com>

With all the plumbing in place, let's just add the separate dedicated
receive buffers to handle notifications that can arrive asynchronously
from the platform firmware to OS.

Also add check to see if the platform supports any receive channels
before allocating the receive buffers.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/driver.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

Comments

Jonathan Cameron Jan. 27, 2020, 5:07 p.m. UTC | #1
On Mon, 20 Jan 2020 12:23:23 +0000
Cristian Marussi <cristian.marussi@arm.com> wrote:

> From: Sudeep Holla <sudeep.holla@arm.com>
> 
> With all the plumbing in place, let's just add the separate dedicated
> receive buffers to handle notifications that can arrive asynchronously
> from the platform firmware to OS.
> 
> Also add check to see if the platform supports any receive channels
> before allocating the receive buffers.

Perhaps hand hold the reader a tiny bit more by saying that we need
to move the initialization later so that we can know *if* the receive
channels are supported.  Took me a moment to figure out why you did that ;)

One minor suggestion inline.

> 
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
>  drivers/firmware/arm_scmi/driver.c | 24 ++++++++++++++++++------
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index 2c96f6b5a7d8..9611e8037d77 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -123,6 +123,7 @@ struct scmi_chan_info {
>   * @version: SCMI revision information containing protocol version,
>   *	implementation version and (sub-)vendor identification.
>   * @tx_minfo: Universal Transmit Message management info
> + * @rx_minfo: Universal Receive Message management info
>   * @tx_idr: IDR object to map protocol id to Tx channel info pointer
>   * @rx_idr: IDR object to map protocol id to Rx channel info pointer
>   * @protocols_imp: List of protocols implemented, currently maximum of
> @@ -136,6 +137,7 @@ struct scmi_info {
>  	struct scmi_revision_info version;
>  	struct scmi_handle handle;
>  	struct scmi_xfers_info tx_minfo;
> +	struct scmi_xfers_info rx_minfo;
>  	struct idr tx_idr;
>  	struct idr rx_idr;
>  	u8 *protocols_imp;
> @@ -690,13 +692,13 @@ int scmi_handle_put(const struct scmi_handle *handle)
>  	return 0;
>  }
>  
> -static int scmi_xfer_info_init(struct scmi_info *sinfo)
> +static int __scmi_xfer_info_init(struct scmi_info *sinfo, bool tx)
>  {
>  	int i;
>  	struct scmi_xfer *xfer;
>  	struct device *dev = sinfo->dev;
>  	const struct scmi_desc *desc = sinfo->desc;
> -	struct scmi_xfers_info *info = &sinfo->tx_minfo;
> +	struct scmi_xfers_info *info = tx ? &sinfo->tx_minfo : &sinfo->rx_minfo;

Perhaps cleaner to just pass in the relevant info structure rather than a boolean
to pick it.  Saves people having to check if the boolean is saying it's
tx or rx when reading the call sites.

>  
>  	/* Pre-allocated messages, no more than what hdr.seq can support */
>  	if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
> @@ -731,6 +733,16 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
>  	return 0;
>  }
>  
> +static int scmi_xfer_info_init(struct scmi_info *sinfo)
> +{
> +	int ret = __scmi_xfer_info_init(sinfo, true);
> +
> +	if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
> +		ret = __scmi_xfer_info_init(sinfo, false);
> +
> +	return ret;
> +}
> +
>  static int scmi_mailbox_check(struct device_node *np, int idx)
>  {
>  	return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells",
> @@ -908,10 +920,6 @@ static int scmi_probe(struct platform_device *pdev)
>  	info->desc = desc;
>  	INIT_LIST_HEAD(&info->node);
>  
> -	ret = scmi_xfer_info_init(info);
> -	if (ret)
> -		return ret;
> -
>  	platform_set_drvdata(pdev, info);
>  	idr_init(&info->tx_idr);
>  	idr_init(&info->rx_idr);
> @@ -924,6 +932,10 @@ static int scmi_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> +	ret = scmi_xfer_info_init(info);
> +	if (ret)
> +		return ret;
> +
>  	ret = scmi_base_protocol_init(handle);
>  	if (ret) {
>  		dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
Cristian Marussi Feb. 14, 2020, 3:25 p.m. UTC | #2
Hi

On 27/01/2020 17:07, Jonathan Cameron wrote:
> On Mon, 20 Jan 2020 12:23:23 +0000
> Cristian Marussi <cristian.marussi@arm.com> wrote:
> 
>> From: Sudeep Holla <sudeep.holla@arm.com>
>>
>> With all the plumbing in place, let's just add the separate dedicated
>> receive buffers to handle notifications that can arrive asynchronously
>> from the platform firmware to OS.
>>
>> Also add check to see if the platform supports any receive channels
>> before allocating the receive buffers.
> 
> Perhaps hand hold the reader a tiny bit more by saying that we need
> to move the initialization later so that we can know *if* the receive
> channels are supported.  Took me a moment to figure out why you did that ;)
> 

Addressed in v2.

> One minor suggestion inline.
> 
>>
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>> ---
>>  drivers/firmware/arm_scmi/driver.c | 24 ++++++++++++++++++------
>>  1 file changed, 18 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
>> index 2c96f6b5a7d8..9611e8037d77 100644
>> --- a/drivers/firmware/arm_scmi/driver.c
>> +++ b/drivers/firmware/arm_scmi/driver.c
>> @@ -123,6 +123,7 @@ struct scmi_chan_info {
>>   * @version: SCMI revision information containing protocol version,
>>   *	implementation version and (sub-)vendor identification.
>>   * @tx_minfo: Universal Transmit Message management info
>> + * @rx_minfo: Universal Receive Message management info
>>   * @tx_idr: IDR object to map protocol id to Tx channel info pointer
>>   * @rx_idr: IDR object to map protocol id to Rx channel info pointer
>>   * @protocols_imp: List of protocols implemented, currently maximum of
>> @@ -136,6 +137,7 @@ struct scmi_info {
>>  	struct scmi_revision_info version;
>>  	struct scmi_handle handle;
>>  	struct scmi_xfers_info tx_minfo;
>> +	struct scmi_xfers_info rx_minfo;
>>  	struct idr tx_idr;
>>  	struct idr rx_idr;
>>  	u8 *protocols_imp;
>> @@ -690,13 +692,13 @@ int scmi_handle_put(const struct scmi_handle *handle)
>>  	return 0;
>>  }
>>  
>> -static int scmi_xfer_info_init(struct scmi_info *sinfo)
>> +static int __scmi_xfer_info_init(struct scmi_info *sinfo, bool tx)
>>  {
>>  	int i;
>>  	struct scmi_xfer *xfer;
>>  	struct device *dev = sinfo->dev;
>>  	const struct scmi_desc *desc = sinfo->desc;
>> -	struct scmi_xfers_info *info = &sinfo->tx_minfo;
>> +	struct scmi_xfers_info *info = tx ? &sinfo->tx_minfo : &sinfo->rx_minfo;
> 
> Perhaps cleaner to just pass in the relevant info structure rather than a boolean
> to pick it.  Saves people having to check if the boolean is saying it's
> tx or rx when reading the call sites.
> 

Done in the upcoming v2.

Regards

Cristian

>>  
>>  	/* Pre-allocated messages, no more than what hdr.seq can support */
>>  	if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
>> @@ -731,6 +733,16 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
>>  	return 0;
>>  }
>>  
>> +static int scmi_xfer_info_init(struct scmi_info *sinfo)
>> +{
>> +	int ret = __scmi_xfer_info_init(sinfo, true);
>> +
>> +	if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
>> +		ret = __scmi_xfer_info_init(sinfo, false);
>> +
>> +	return ret;
>> +}
>> +
>>  static int scmi_mailbox_check(struct device_node *np, int idx)
>>  {
>>  	return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells",
>> @@ -908,10 +920,6 @@ static int scmi_probe(struct platform_device *pdev)
>>  	info->desc = desc;
>>  	INIT_LIST_HEAD(&info->node);
>>  
>> -	ret = scmi_xfer_info_init(info);
>> -	if (ret)
>> -		return ret;
>> -
>>  	platform_set_drvdata(pdev, info);
>>  	idr_init(&info->tx_idr);
>>  	idr_init(&info->rx_idr);
>> @@ -924,6 +932,10 @@ static int scmi_probe(struct platform_device *pdev)
>>  	if (ret)
>>  		return ret;
>>  
>> +	ret = scmi_xfer_info_init(info);
>> +	if (ret)
>> +		return ret;
>> +
>>  	ret = scmi_base_protocol_init(handle);
>>  	if (ret) {
>>  		dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
> 
>
diff mbox series

Patch

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 2c96f6b5a7d8..9611e8037d77 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -123,6 +123,7 @@  struct scmi_chan_info {
  * @version: SCMI revision information containing protocol version,
  *	implementation version and (sub-)vendor identification.
  * @tx_minfo: Universal Transmit Message management info
+ * @rx_minfo: Universal Receive Message management info
  * @tx_idr: IDR object to map protocol id to Tx channel info pointer
  * @rx_idr: IDR object to map protocol id to Rx channel info pointer
  * @protocols_imp: List of protocols implemented, currently maximum of
@@ -136,6 +137,7 @@  struct scmi_info {
 	struct scmi_revision_info version;
 	struct scmi_handle handle;
 	struct scmi_xfers_info tx_minfo;
+	struct scmi_xfers_info rx_minfo;
 	struct idr tx_idr;
 	struct idr rx_idr;
 	u8 *protocols_imp;
@@ -690,13 +692,13 @@  int scmi_handle_put(const struct scmi_handle *handle)
 	return 0;
 }
 
-static int scmi_xfer_info_init(struct scmi_info *sinfo)
+static int __scmi_xfer_info_init(struct scmi_info *sinfo, bool tx)
 {
 	int i;
 	struct scmi_xfer *xfer;
 	struct device *dev = sinfo->dev;
 	const struct scmi_desc *desc = sinfo->desc;
-	struct scmi_xfers_info *info = &sinfo->tx_minfo;
+	struct scmi_xfers_info *info = tx ? &sinfo->tx_minfo : &sinfo->rx_minfo;
 
 	/* Pre-allocated messages, no more than what hdr.seq can support */
 	if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
@@ -731,6 +733,16 @@  static int scmi_xfer_info_init(struct scmi_info *sinfo)
 	return 0;
 }
 
+static int scmi_xfer_info_init(struct scmi_info *sinfo)
+{
+	int ret = __scmi_xfer_info_init(sinfo, true);
+
+	if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
+		ret = __scmi_xfer_info_init(sinfo, false);
+
+	return ret;
+}
+
 static int scmi_mailbox_check(struct device_node *np, int idx)
 {
 	return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells",
@@ -908,10 +920,6 @@  static int scmi_probe(struct platform_device *pdev)
 	info->desc = desc;
 	INIT_LIST_HEAD(&info->node);
 
-	ret = scmi_xfer_info_init(info);
-	if (ret)
-		return ret;
-
 	platform_set_drvdata(pdev, info);
 	idr_init(&info->tx_idr);
 	idr_init(&info->rx_idr);
@@ -924,6 +932,10 @@  static int scmi_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = scmi_xfer_info_init(info);
+	if (ret)
+		return ret;
+
 	ret = scmi_base_protocol_init(handle);
 	if (ret) {
 		dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);