@@ -51,7 +51,7 @@ free space valid for 30 seconds.
acpi_video_flags
================
-See Documentation/kernel/power/video.txt, it allows mode of video boot
+See Documentation/power/video.rst, it allows mode of video boot
to be set during run time.
@@ -6,7 +6,7 @@ Documentation subsystem maintainer entry profile
The documentation "subsystem" is the central coordinating point for the
kernel's documentation and associated infrastructure. It covers the
hierarchy under Documentation/ (with the exception of
-Documentation/device-tree), various utilities under scripts/ and, at least
+Documentation/devicetree), various utilities under scripts/ and, at least
some of the time, LICENSES/.
It's worth noting, though, that the boundaries of this subsystem are rather
@@ -319,7 +319,7 @@ Handling a page fault is performed as follows:
- If both P bit and R/W bit of error code are set, this could possibly
be handled as a "fast page fault" (fixed without taking the MMU lock). See
- the description in Documentation/virt/kvm/locking.txt.
+ the description in Documentation/virt/kvm/locking.rst.
- if needed, walk the guest page tables to determine the guest translation
(gva->gpa or ngpa->gpa)
@@ -10,7 +10,7 @@ Review checklist for kvm patches
2. Patches should be against kvm.git master branch.
3. If the patch introduces or modifies a new userspace API:
- - the API must be documented in Documentation/virt/kvm/api.txt
+ - the API must be documented in Documentation/virt/kvm/api.rst
- the API must be discoverable using KVM_CHECK_EXTENSION
4. New state must include support for save/restore.
@@ -3595,7 +3595,7 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
/*
* Currently, fast page fault only works for direct mapping
* since the gfn is not stable for indirect shadow page. See
- * Documentation/virt/kvm/locking.txt to get more detail.
+ * Documentation/virt/kvm/locking.rst to get more detail.
*/
fault_handled = fast_pf_fix_direct_spte(vcpu, sp,
iterator.sptep, spte,
@@ -8,7 +8,7 @@
* This file add support for AES cipher with 128,192,256 bits keysize in
* CBC and ECB mode.
*
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
#include <linux/crypto.h>
@@ -7,7 +7,7 @@
*
* Core file which registers crypto algorithms supported by the CryptoEngine.
*
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
#include <linux/clk.h>
#include <linux/crypto.h>
@@ -8,7 +8,7 @@
* This file add support for AES cipher with 128,192,256 bits keysize in
* CBC and ECB mode.
*
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
#include <linux/crypto.h>
@@ -7,7 +7,7 @@
*
* Core file which registers crypto algorithms supported by the SecuritySystem
*
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
#include <linux/clk.h>
#include <linux/crypto.h>
@@ -820,7 +820,7 @@ static int v4l2_fwnode_reference_parse(struct device *dev,
*
* THIS EXAMPLE EXISTS MERELY TO DOCUMENT THIS FUNCTION. DO NOT USE IT AS A
* REFERENCE IN HOW ACPI TABLES SHOULD BE WRITTEN!! See documentation under
- * Documentation/acpi/dsd instead and especially graph.txt,
+ * Documentation/firmware-guide/acpi/dsd/ instead and especially graph.txt,
* data-node-references.txt and leds.txt .
*
* Scope (\_SB.PCI0.I2C2)
@@ -116,7 +116,7 @@ struct kvm_irq_level {
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
- * For ARM: See Documentation/virt/kvm/api.txt
+ * For ARM: See Documentation/virt/kvm/api.rst
*/
union {
__u32 irq;
@@ -1100,7 +1100,7 @@ struct kvm_xen_hvm_config {
*
* KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
* the irqfd to operate in resampling mode for level triggered interrupt
- * emulation. See Documentation/virt/kvm/api.txt.
+ * emulation. See Documentation/virt/kvm/api.rst.
*/
#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
@@ -116,7 +116,7 @@ struct kvm_irq_level {
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
- * For ARM: See Documentation/virt/kvm/api.txt
+ * For ARM: See Documentation/virt/kvm/api.rst
*/
union {
__u32 irq;
@@ -1100,7 +1100,7 @@ struct kvm_xen_hvm_config {
*
* KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
* the irqfd to operate in resampling mode for level triggered interrupt
- * emulation. See Documentation/virt/kvm/api.txt.
+ * emulation. See Documentation/virt/kvm/api.rst.
*/
#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
Some broken references happened due to shifting files around and ReST renames. Those can't be auto-fixed by the script, so let's fix them manually. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- Documentation/admin-guide/sysctl/kernel.rst | 2 +- Documentation/doc-guide/maintainer-profile.rst | 2 +- Documentation/virt/kvm/mmu.rst | 2 +- Documentation/virt/kvm/review-checklist.rst | 2 +- arch/x86/kvm/mmu/mmu.c | 2 +- drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c | 2 +- drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c | 2 +- drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 2 +- drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 2 +- drivers/media/v4l2-core/v4l2-fwnode.c | 2 +- include/uapi/linux/kvm.h | 4 ++-- tools/include/uapi/linux/kvm.h | 4 ++-- 12 files changed, 14 insertions(+), 14 deletions(-)